Released energy meters for PIKO IQ / PLENTICORE plus

Transkript

1 Released energy meters for PIKO IQ / PLETICORE plus Version: 03/2018 / Released energy meters Inverter B+G E-Tech GmbH SDM630-Modbus TQ-System GmbH B-control EM 300 LR 1 The energy meter can be used instead of a ripple control receiver for dynamic active power control Set Energy Meter: Building consumption with batterie For dynamic active power control 1 PIKO IQ X - - PLETICORE plus X - - PIKO IQ X - X PLETICORE plus X X X n During first installation n Under the inverter menue item: Servicemenue > Energy management > Energy meter n Under the Webserver menue item: Servicemenue > Energy management > Energy counter 0% 100% Technische Änderungen und Irrtümer vorbehalten. Aktuelle Informationen finden Sie unter. Hersteller: KOSTAL Industrie Elektrik GmbH, Hagen,

2 onnection - B+G E Tech GmbH SDM630-Modbus RS485 Settings - SDM630-Modbus Menue item X401 X601 X602 X452 Value 5 SDM630 Modbus X452 X SCB A B GD RS485 (Modbus) Inverter Anschluss/Connection SDM630-Modbus Adress 1 RS485 A RS485 A (9) Bautrate 9600 Baud RS485 B RS485 B (10) Databit 8 GD - Stoppbit 1 Parität one Technische Änderungen und Irrtümer vorbehalten. Aktuelle Informationen finden Sie unter. Hersteller: KOSTAL Industrie Elektrik GmbH, Hagen,

3 Connection - TQ-System GmbH B-Control EM300 LR RS485 Settings - B-Control EM300 LR Menue item X401 X601 X602 X452 X451 Value STATUS ETWORK SESOR RESET EM300 LR LA SCB VCC RS485 A RS485 B GD nverter X452 A B GD Anschluss/Connection RS485 (Modbus) B-Control EM 300 LR Adress (Slave ID) 1 RS485 A RS485 A Bautrate Baud RS485 B RS485 B Databit 8 GD GD Stoppbit 2 Parität one Technische Änderungen und Irrtümer vorbehalten. Aktuelle Informationen finden Sie unter. Hersteller: KOSTAL Industrie Elektrik GmbH, Hagen,

4 Configuration - TQ-System GmbH B-Control EM300 LR A detailed description can be found in the operating instructions manual of the manufacturer. nnconnect PC with energy meter via LA cable nnopen a web browser and enter the IP address: http: // b-control-em or If the energy counter is not found, use the B-control Finder tool from the manufacturer s home page at html. With the tool it is possible to find and call up the correct IP address of the energy meter. Press ext nnthe configuration can be done without a password. Press Apply nntake the time Technische Änderungen und Irrtümer vorbehalten. Aktuelle Informationen finden Sie unter. Hersteller: KOSTAL Industrie Elektrik GmbH, Hagen,

5 n n Your Tariff and Your budget does not require any settings. Press button Save setting. nnthe installation is complete. Continue with extented settings. nnmake settings for the Modbus. To do this, follow these steps: - Disable SESOR (by clicking on the circle) - Activate Modbus slave (click twice to get into the Modbus configuration) Enter the following data: Baud rate: Daten bits: 8 Parity: none Stop bits: 2 Slave id: 1 nnsave settings. Configuration completed Technische Änderungen und Irrtümer vorbehalten. Aktuelle Informationen finden Sie unter. Hersteller: KOSTAL Industrie Elektrik GmbH, Hagen,