Catalog ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH. PO Box 1631 D Bietigheim-Bissingen. Schleifmuehle 7 D Bietigheim-Bissingen
|
|
- Barbara Lang
- vor 5 Jahren
- Abrufe
Transkript
1
2 Catalog 2016 ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH PO Box 1631 D Bietigheim-Bissingen Schleifmuehle 7 D Bietigheim-Bissingen Telefon +49 (0) 7142 / Telefax +49 (0) 7142 / post@zebo.biz Internet Customer No.: Discount: Surcharge: HSS/HSCO +4,2% carbide +7,8% Catalog 2016 Page 2
3 Centre drills Centre drills form A 4 Centre drills form A with bead 8 Centre drills form R 9 Centre drills form B 12 Centre drills, countersink 90 and Centre drills form A, R, B with flat 15 NC Centre drills NC centre drills - point angle NC centre drills - point angle NC centre drills - point angle NC centre drills - point angle Twist drills Twist drills DIN 1899-A 22 Solid carbide twist drills DIN 6539 and DIN Carbide-tipped twist drills DIN 8037 and DIN Solid carbide twist drills 28 Step drills and subland drills Step drills for centre holes, form D, DS, DR 31 Step drills and subland drills for thread core holes 34 Step drills and subland drills for through holes, included angle Step drills and subland drills for through holes, included angle Countersinks Countersinks and Counterbores 39 GRANLUND System Special drills and countersinks Forms for special designed drills and countersinks 40 Terms of delivery and payment 43 This catalog substitutes all former price documents. All tools with bold printed prices can be usually supplied from stock. The light printed prices of less popular tools only apply if the tools are in stock. If these articles are not in stock, it will be possible to produce them in short time as special production; prices on request. All illustrations, mass, technical data and descriptions are brought up-to-date upon printing of the catalog and are subject to chance due to the progress of technology. Changes may be necessary to improve the quality and performance of our tools. Any kinds of misprints or alterations do not entitle anybody to make claims on something. Catalog 2016 Page 3
4 HSS centre drills DIN 333 form A 60 Surface: blank ** for centre holes according to DIN 332 edition 1986, part 1, form A Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 0,50 +0,14 3,15 0,80 +0,20 25,00* 5, AR 0,80 +0,14 3,15 1,10 +0,40 25,00* 5, AR 1,00 +0,14 3,15 1,30 +0,60 31,50 4, AR 1,25 +0,14 3,15 1,60 +0,60 31,50 5, AR 1,60 +0,14 4,00 2,00 +0,80 35,50 4, AR 2,00 +0,14 5,00 2,50 +0,80 40,00 4, AR 2,50 +0,14 6,30 3,10 +1,00 45,00 5, AR 3,15 +0,18 8,00 3,90 +1,00 50,00 7, AR 4,00 +0,18 10,00 5,00 +1,20 56,00 11, AR 5,00 +0,18 12,50 6,30 +1,20 63,00 15, AR 6,30 +0,22 16,00 8,00 +1,20 71,00 23, AR 8,00 +0,22 20,00 10,10 +1,40 80,00 36, AR 10,00 +0,22 25,00 12,80 +1,40 100,00 73, AR 12,50 +0,27 31,50 16,50 +1,40 125,00 112,35 ACENT Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 1,00 +0,14 3,15 1,30 +0,60 31,50 2, AR 1,25 +0,14 3,15 1,60 +0,60 31,50 2, AR 1,60 +0,14 4,00 2,00 +0,80 35,50 2, AR 2,00 +0,14 5,00 2,50 +0,80 40,00 2, AR 2,50 +0,14 6,30 3,10 +1,00 45,00 3, AR 3,15 +0,18 8,00 3,90 +1,00 50,00 3, AR 4,00 +0,18 10,00 5,00 +1,20 56,00 4, AR 5,00 +0,18 12,50 6,30 +1,20 63,00 7, AR 6,30 +0,22 16,00 8,00 +1,20 71,00 10, AR 8,00 +0,22 20,00 10,10 +1,40 80,00 15, AR 10,00 +0,22 25,00 12,80 +1,40 100,00 34, AR 12,50 +0,27 31,50 16,50 +1,40 125,00 42,10 * Cutting on one end only ACENT - Tools are sold in whole packing units only ** in part with black flutes Ø0,5-Ø3,15 PU=10 pieces Ø4,0-Ø6,3 PU=5 pieces Ø8-Ø10 PU=1 piece Catalog 2016 Page 4
5 HSCO centre drills DIN 333 form A 60 Surface: see table for centre holes according to DIN 332 edition 1986, part 1, form A HSCO - surface blank ** Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 0,50 +0,14 3,15 0,80 +0,20 25,00* 10, AR 0,80 +0,14 3,15 1,10 +0,40 25,00* 9, AR 1,00 +0,14 3,15 1,30 +0,60 31,50 11, AR 1,25 +0,14 3,15 1,60 +0,60 31,50 13, AR 1,60 +0,14 4,00 2,00 +0,80 35,50 11, AR 2,00 +0,14 5,00 2,50 +0,80 40,00 12, AR 2,50 +0,14 6,30 3,10 +1,00 45,00 12, AR 3,15 +0,18 8,00 3,90 +1,00 50,00 14, AR 4,00 +0,18 10,00 5,00 +1,20 56,00 16, AR 5,00 +0,18 12,50 6,30 +1,20 63,00 21, AR 6,30 +0,22 16,00 8,00 +1,20 71,00 33, AR 8,00 +0,22 20,00 10,10 +1,40 80,00 46, AR 10,00 +0,22 25,00 12,80 +1,40 100,00 93,46 HSCO + TiAlN Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 0,50 +0,14 3,15 0,80 +0,20 25,00* 10, AR 0,80 +0,14 3,15 1,10 +0,40 25,00* 10, AR 1,00 +0,14 3,15 1,30 +0,60 31,50 12, AR 1,25 +0,14 3,15 1,60 +0,60 31,50 15, AR 1,60 +0,14 4,00 2,00 +0,80 35,50 12, AR 2,00 +0,14 5,00 2,50 +0,80 40,00 14, AR 2,50 +0,14 6,30 3,10 +1,00 45,00 16, AR 3,15 +0,18 8,00 3,90 +1,00 50,00 19, AR 4,00 +0,18 10,00 5,00 +1,20 56,00 20, AR 5,00 +0,18 12,50 6,30 +1,20 63,00 28, AR 6,30 +0,22 16,00 8,00 +1,20 71,00 41,75 * Cutting on one end only ** in part with black flutes Catalog 2016 Page 5
6 Solid carbide centre drills K20/40 UF DIN 333 form A 60 Surface: see table for centre holes according to DIN 332 edition 1986, part 1, form A Solid carbide - surface blank Catalog d1 Tol. D h7 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 0,50 +0,14 3,15 0,80 +0,20 25,00* 15, AR 0,80 +0,14 3,15 1,10 +0,40 25,00* 15, AR 1,00 +0,14 3,15 1,30 +0,60 31,50 17, AR 1,25 +0,14 3,15 1,60 +0,60 31,50 17, AR 1,60 +0,14 4,00 2,00 +0,80 35,50 18, AR 2,00 +0,14 5,00 2,50 +0,80 40,00 23, AR 2,50 +0,14 6,30 3,10 +1,00 45,00 28, AR 3,15 +0,18 8,00 3,90 +1,00 50,00 30, AR 4,00 +0,18 10,00 5,00 +1,20 56,00 47, AR 5,00 +0,18 12,50 6,30 +1,20 63,00 62, AR 6,30 +0,22 16,00 8,00 +1,20 71,00 93,30 Solid carbide + TiAlN Catalog d1 Tol. D h7 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 0,50 +0,14 3,15 0,80 +0,20 25,00* 16, AR 0,80 +0,14 3,15 1,10 +0,40 25,00* 16, AR 1,00 +0,14 3,15 1,30 +0,60 31,50 19, AR 1,25 +0,14 3,15 1,60 +0,60 31,50 19, AR 1,60 +0,14 4,00 2,00 +0,80 35,50 20, AR 2,00 +0,14 5,00 2,50 +0,80 40,00 27, AR 2,50 +0,14 6,30 3,10 +1,00 45,00 33, AR 3,15 +0,18 8,00 3,90 +1,00 50,00 36, AR 4,00 +0,18 10,00 5,00 +1,20 56,00 52, AR 5,00 +0,18 12,50 6,30 +1,20 63,00 69, AR 6,30 +0,22 16,00 8,00 +1,20 71,00 103,26 * Cutting on one end only Catalog 2016 Page 6
7 HSS centre drills DIN 333 form A 60 Surface: blank * for centre holes according to DIN 332 edition 1962, part 1, form A DIN - Edition 1962 Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc AR 1,25 +0,10 4,00 1,90-0,30 35,50 6, AR 1,60 +0,15 5,00 2,40-0,40 40,00 5, AR 2,00 +0,15 6,30 2,90-0,40 45,00 7, AR 2,50 +0,15 8,00 3,60-0,50 50,00 8, AR 3,15 +0,15 10,00 4,40-0,50 56,00 12, AR 4,00 +0,20 12,50 5,60-0,60 63,00 17, AR 5,00 +0,20 16,00 6,90-0,60 71,00 27, AR 6,30 +0,20 20,00 8,60-0,60 80,00 42, AR 8,00 +0,20 25,00 10,80-0,70 100,00 74, AR 10,00 +0,20 31,50 13,50-0,70 125,00 127,57 HSS centre drills similar to DIN 333 form A 60 Surface: blank * for centre holes according to DIN 332 edition 1986 and 1962, part 1, form A Extra long shank Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc ,00 +0,10 4,00 1,60-0,30 80,00 7, ,00 +0,10 4,00 1,60-0,30 120,00 8, ,60 +0,15 5,00 2,40-0,40 80,00 5, ,60 +0,15 5,00 2,40-0,40 120,00 8, ,00 +0,15 6,00 2,90-0,40 80,00 5, ,00 +0,15 6,00 2,90-0,40 120,00 8, ,50 +0,15 8,00 3,60-0,50 120,00 9, ,15 +0,15 10,00 4,40-0,50 120,00 11, ,00 +0,20 12,50 5,60-0,60 120,00 19, ,30 +0,22 16,00 8,00 +1,20 120,00 40, ,30 +0,22 16,00 8,00 +1,20 150,00 50,20 ** in part with black flutes Catalog 2016 Page 7
8 HSS centre drills DIN 333 form A 60 left-hand cutting Surface: blank ** for centre holes according to DIN 332 edition 1986, part 1, form A left-hand cutting Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc AL 0,50 +0,14 3,15 0,80 +0,20 25,00* 9, AL 0,80 +0,14 3,15 1,10 +0,40 25,00* 8, AL 1,00 +0,14 3,15 1,30 +0,60 31,50 8, AL 1,25 +0,14 3,15 1,60 +0,60 31,50 8, AL 1,60 +0,14 4,00 2,00 +0,80 35,50 8, AL 2,00 +0,14 5,00 2,50 +0,80 40,00 9, AL 2,50 +0,14 6,30 3,10 +1,00 45,00 9, AL 3,15 +0,18 8,00 3,90 +1,00 50,00 12, AL 4,00 +0,18 10,00 5,00 +1,20 56,00 16, AL 5,00 +0,18 12,50 6,30 +1,20 63,00 26, AL 6,30 +0,22 16,00 8,00 +1,20 71,00 40, AL 8,00 +0,22 20,00 10,10 +1,40 80,00 61,75 HSS centre drills DIN 333 form A 60 with bead Surface: blank ** for centre holes similar to DIN 332 edition 1986, part 1, form A With bead Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc WR 1,00 +0,14 3,15 1,30 +0,60 31,50 8, WR 1,25 +0,14 3,15 1,60 +0,60 31,50 9, WR 1,60 +0,14 4,00 2,00 +0,80 35,50 7, WR 2,00 +0,14 5,00 2,50 +0,80 40,00 7, WR 2,50 +0,14 6,30 3,10 +1,00 45,00 8, WR 3,15 +0,18 8,00 3,90 +1,00 50,00 13, WR 4,00 +0,18 10,00 5,00 +1,20 56,00 18, WR 5,00 +0,18 12,50 6,30 +1,20 63,00 26, WR 6,30 +0,22 16,00 8,00 +1,20 71,00 39,43 * Cutting on one end only ** in part with black flutes Catalog 2016 Page 8
9 HSS centre drills DIN 333 form R Surface: blank ** for centre holes according to DIN 332 edition 1986, part 1, form R Catalog d1 Tol. D h8 l1 Tol. L r min. r max. Price number mm mm mm mm mm mm mm mm / pc RR 0,50 +0,14 3,15 2,12 +0,20 25,00* 1,25 1,60 6, RR 0,80 +0,14 3,15 2,65 +0,40 25,00* 2,00 2,50 6, RR 1,00 +0,14 3,15 3,00 +0,60 31,50 2,50 3,15 5, RR 1,25 +0,14 3,15 3,35 +0,60 31,50 3,15 4,00 6, RR 1,60 +0,14 4,00 4,25 +0,80 35,50 4,00 5,00 5, RR 2,00 +0,14 5,00 5,30 +0,80 40,00 5,00 6,30 6, RR 2,50 +0,14 6,30 6,70 +1,00 45,00 6,30 8,00 7, RR 3,15 +0,18 8,00 8,50 +1,00 50,00 8,00 10,00 8, RR 4,00 +0,18 10,00 10,60 +1,20 56,00 10,00 12,50 13, RR 5,00 +0,18 12,50 13,20 +1,20 63,00 12,50 16,00 18, RR 6,30 +0,22 16,00 17,00 +1,20 71,00 16,00 20,00 28, RR 8,00 +0,22 20,00 21,20 +1,40 80,00 20,00 25,00 44, RR 10,00 +0,22 25,00 26,50 +1,40 100,00 25,00 31,50 88, RR 12,50 +0,27 31,50 33,50 +1,40 125,00 31,50 40,00 130,80 ACENT Catalog d1 Tol. D h8 l1 Tol. L r min. r max. Price number mm mm mm mm mm mm mm mm / pc RR 1,00 +0,14 3,15 3,00 +0,60 31,50 2,50 3,15 2, RR 1,25 +0,14 3,15 3,35 +0,60 31,50 3,15 4,00 2, RR 1,60 +0,14 4,00 4,25 +0,80 35,50 4,00 5,00 2, RR 2,00 +0,14 5,00 5,30 +0,80 40,00 5,00 6,30 3, RR 2,50 +0,14 6,30 6,70 +1,00 45,00 6,30 8,00 3, RR 3,15 +0,18 8,00 8,50 +1,00 50,00 8,00 10,00 3, RR 4,00 +0,18 10,00 10,60 +1,20 56,00 10,00 12,50 5, RR 5,00 +0,18 12,50 13,20 +1,20 63,00 12,50 16,00 7, RR 6,30 +0,22 16,00 17,00 +1,20 71,00 16,00 20,00 13,17 * Cutting on one end only ACENT - Tools are sold in whole packing units only ** in part with black flutes Ø0,5-Ø3,15 PU=10 pieces Ø4,0-Ø6,3 PU=5 pieces Catalog 2016 Page 9
10 HSCO centre drills DIN 333 form R Surface: TiAlN - coated for centre holes according to DIN 332 edition 1986, part 1, form R HSCO + TiAlN Catalog d1 Tol. D h8 l1 Tol. L r min. r max. Price number mm mm mm mm mm mm mm mm / pc RR 0,80 +0,14 3,15 2,65 +0,40 25,00* 2,00 2,50 12, RR 1,00 +0,14 3,15 3,00 +0,60 31,50 2,50 3,15 13, RR 1,60 +0,14 4,00 4,25 +0,80 35,50 4,00 5,00 13, RR 2,00 +0,14 5,00 5,30 +0,80 40,00 5,00 6,30 15, RR 2,50 +0,14 6,30 6,70 +1,00 45,00 6,30 8,00 17, RR 3,15 +0,18 8,00 8,50 +1,00 50,00 8,00 10,00 20, RR 4,00 +0,18 10,00 10,60 +1,20 56,00 10,00 12,50 25, RR 5,00 +0,18 12,50 13,20 +1,20 63,00 12,50 16,00 32, RR 6,30 +0,22 16,00 17,00 +1,20 71,00 16,00 20,00 51,91 Solid carbide centre drills K20/40 UF DIN 333 form R Surface: blank for centre holes according to DIN 332 edition 1986, part 1, form R Solid carbide Catalog d1 Tol. D h7 l1 Tol. L r min. r max. Price number mm mm mm mm mm mm mm mm / pc RR 1,00 +0,14 3,15 3,00 +0,60 31,50 2,50 3,15 25, RR 1,25 +0,14 3,15 3,35 +0,60 31,50 3,15 4,00 35, RR 1,60 +0,14 4,00 4,25 +0,80 35,50 4,00 5,00 27, RR 2,00 +0,14 5,00 5,30 +0,80 40,00 5,00 6,30 32, RR 2,50 +0,14 6,30 6,70 +1,00 45,00 6,30 8,00 37, RR 3,15 +0,18 8,00 8,50 +1,00 50,00 8,00 10,00 38, RR 4,00 +0,18 10,00 10,60 +1,20 56,00 10,00 12,50 63, RR 5,00 +0,18 12,50 13,20 +1,20 63,00 12,50 16,00 70, RR 6,30 +0,22 16,00 17,00 +1,20 71,00 16,00 20,00 110,20 * Cutting on one end only Catalog 2016 Page 10
11 HSS centre drills DIN 333 form R Surface: blank * for centre holes according to DIN 332 edition 1962, part 1, form R DIN Edition 1962 Catalog d1 Tol. D h8 l1 Tol. L r min. r max. Price number mm mm mm mm mm mm mm mm / pc RR 1,25 +0,10 4,00 3,75-0,30 35,50 3,15 4,00 9, RR 1,60 +0,15 5,00 4,75-0,40 40,00 4,00 5,00 5, RR 2,00 +0,15 6,30 6,00-0,40 45,00 5,00 6,30 7, RR 2,50 +0,15 8,00 7,50-0,50 50,00 6,30 8,00 8, RR 3,15 +0,15 10,00 9,50-0,50 56,00 8,00 10,00 12, RR 4,00 +0,20 12,50 11,80-0,60 63,00 10,00 12,50 16, RR 5,00 +0,20 16,00 15,00-0,60 71,00 12,50 16,00 27, RR 6,30 +0,20 20,00 19,00-0,60 80,00 16,00 20,00 42, RR 8,00 +0,20 25,00 23,60-0,70 100,00 20,00 25,00 74, RR 10,00 +0,20 31,50 30,00-0,70 125,00 25,00 31,50 104,91 HSS centre drills DIN 333 form R left-hand cutting Surface: blank ** for centre holes according todin 332 edition 1986, part 1, form R left-hand cutting Catalog d1 Tol. D h8 l1 Tol. L r min. r max. Price number mm mm mm mm mm mm mm mm / pc RL 0,80 +0,14 3,15 2,65 +0,40 25,00* 2,00 2,50 13, RL 1,00 +0,14 3,15 3,00 +0,60 31,50 2,50 3,15 14, RL 1,25 +0,14 3,15 3,35 +0,60 31,50 3,15 4,00 14, RL 1,60 +0,14 4,00 4,25 +0,80 35,50 4,00 5,00 11, RL 2,00 +0,14 5,00 5,30 +0,80 40,00 5,00 6,30 13, RL 2,50 +0,14 6,30 6,70 +1,00 45,00 6,30 8,00 12, RL 3,15 +0,18 8,00 8,50 +1,00 50,00 8,00 10,00 17, RL 4,00 +0,18 10,00 10,60 +1,20 56,00 10,00 12,50 22, RL 5,00 +0,18 12,50 13,20 +1,20 63,00 12,50 16,00 37, RL 6,30 +0,22 16,00 17,00 +1,20 71,00 16,00 20,00 53,35 * cutting on one end only ** in part with black flutes Catalog 2016 Page 11
12 HSS centre drills DIN 333 form B 60/120 Surface: blank * for centre holes according to DIN 332 edition 1986, part 1, form B Catalog d1 Tol. d2 D h8 l1 Tol. L Price number mm mm mm mm mm mm mm / pc BR 1,00 +0,14 2,12 4,00 1,30 +0,60 35,50 9, BR 1,25 +0,14 2,65 5,00 1,60 +0,60 40,00 10, BR 1,60 +0,14 3,35 6,30 2,00 +0,80 45,00 9, BR 2,00 +0,14 4,25 8,00 2,50 +0,80 50,00 10, BR 2,50 +0,14 5,30 10,00 3,10 +1,00 56,00 12, BR 3,15 +0,18 6,70 11,20 3,90 +1,00 60,00 17, BR 4,00 +0,18 8,50 14,00 5,00 +1,20 67,00 23, BR 5,00 +0,18 10,60 18,00 6,30 +1,20 75,00 29, BR 6,30 +0,22 13,20 20,00 8,00 +1,20 80,00 47, BR 8,00 +0,22 17,00 25,00 10,10 +1,40 100,00 83, BR 10,00 +0,22 21,20 31,50 12,80 +1,40 125,00 169,04 ACENT Catalog d1 Tol. d2 D h8 l1 Tol. L Price number mm mm mm mm mm mm mm / pc BR 1,00 +0,14 2,12 4,00 1,30 +0,60 35,50 3, BR 1,25 +0,14 2,65 5,00 1,60 +0,60 40,00 3, BR 1,60 +0,14 3,35 6,30 2,00 +0,80 45,00 4, BR 2,00 +0,14 4,25 8,00 2,50 +0,80 50,00 4, BR 2,50 +0,14 5,30 10,00 3,10 +1,00 56,00 6, BR 3,15 +0,18 6,70 11,20 3,90 +1,00 60,00 7, BR 4,00 +0,18 8,50 14,00 5,00 +1,20 67,00 8, BR 5,00 +0,18 10,60 18,00 6,30 +1,20 75,00 15, BR 6,30 +0,22 13,20 20,00 8,00 +1,20 80,00 19,30 * in part with black flutes ACENT - Tools are sold in whole packing units only Ø1,0-Ø3,15 PU=10 pieces Ø4,0-Ø5,0 PU=5 pieces Catalog 2016 Page 12
13 Solid carbide centre drills K20/40 UF DIN 333 form B Surface: blank for centre holes according to DIN 332 edition 1986, part 1, form B Solid carbide Catalog d1 Tol. d2 D h8 l1 Tol. L Price number mm mm mm mm mm mm mm / pc BR 1,00 +0,14 2,12 4,00 1,30 +0,60 35,50 40, BR 1,60 +0,14 3,35 6,30 2,00 +0,80 45,00 53, BR 2,00 +0,14 4,25 8,00 2,50 +0,80 50,00 57, BR 2,50 +0,14 5,30 10,00 3,10 +1,00 56,00 61, BR 3,15 +0,18 6,70 11,20 3,90 +1,00 60,00 85, BR 4,00 +0,18 8,50 14,00 5,00 +1,20 67,00 143,80 HSS centre drills DIN 333 form B 60/120 left-hand cutting Surface: blank * for centre holes according to DIN 332 edition 1986, part 1, form B left-hand cutting Catalog d1 Tol. d2 D h8 l1 Tol. L Price number mm mm mm mm mm mm mm / pc BL 1,00 +0,14 2,12 4,00 1,30 +0,60 35,50 20, BL 1,25 +0,14 2,65 5,00 1,60 +0,60 40,00 26, BL 1,60 +0,14 3,35 6,30 2,00 +0,80 45,00 26, BL 2,00 +0,14 4,25 8,00 2,50 +0,80 50,00 26, BL 2,50 +0,14 5,30 10,00 3,10 +1,00 56,00 27, BL 3,15 +0,18 6,70 11,20 3,90 +1,00 60,00 39, BL 4,00 +0,18 8,50 14,00 5,00 +1,20 67,00 40, BL 5,00 +0,18 10,60 18,00 6,30 +1,20 75,00 43, BL 6,30 +0,22 13,20 20,00 8,00 +1,20 80,00 63,65 * in part with black flutes Catalog 2016 Page 13
14 HSS centre drills similar to DIN 333 Surface: blank ** for centre holes similar to DIN 332 edition 1986, part 1, countersink 90 and 75 Countersink 90 Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc ,50 +0,14 3,15 0,80 +0,20 25,00* 8, ,80 +0,14 3,15 1,10 +0,40 25,00* 8, ,00 +0,14 3,15 1,30 +0,60 31,50 8, ,25 +0,14 3,15 1,60 +0,60 31,50 14, ,60 +0,14 4,00 2,00 +0,80 35,50 8, ,00 +0,14 5,00 2,50 +0,80 40,00 8, ,50 +0,14 6,30 3,10 +1,00 45,00 9, ,15 +0,18 8,00 3,90 +1,00 50,00 11, ,00 +0,18 10,00 5,00 +1,20 56,00 14, ,00 +0,18 12,50 6,30 +1,20 63,00 21, ,30 +0,22 16,00 8,00 +1,20 71,00 33, ,00 +0,22 20,00 10,10 +1,40 80,00 42, ,00 +0,22 25,00 12,80 +1,40 100,00 119, ,50 +0,27 31,50 16,50 +1,40 125,00 138,25 * cutting on one end only Countersink 75 Catalog d1 Tol. D h8 l1 Tol. L Price number mm mm mm mm mm mm / pc ,60 +0,14 4,00 2,00 +0,80 35,50 15, ,00 +0,14 5,00 2,50 +0,80 40,00 15, ,50 +0,14 6,30 3,10 +1,00 45,00 16, ,15 +0,18 8,00 3,90 +1,00 50,00 17, ,00 +0,18 10,00 5,00 +1,20 56,00 22, ,00 +0,18 12,50 6,30 +1,20 63,00 33, ,30 +0,22 16,00 8,00 +1,20 71,00 42, ,00 +0,22 20,00 10,10 +1,40 80,00 81, ,00 +0,22 25,00 12,80 +1,40 100,00 119, ,50 +0,27 31,50 16,50 +1,40 125,00 158,23 ** in part with black flutes Catalog 2016 Page 14
15 HSS centre drills with flat similar to DIN 333 form A 60 Surface: blank * for centre holes according to DIN 332 edition 1986, part 1, form A Form A with flat Catalog d1 Tol. D h7 l1 Tol. L s Price number mm mm mm mm mm mm mm / pc AF 1,60 +0,14 4,00 2,00 +0,80 35,50 3,25 6, AF 2,00 +0,14 5,00 2,50 +0,80 40,00 4,20 6, AF 2,50 +0,14 6,30 3,10 +1,00 45,00 5,35 7, AF 3,15 +0,18 8,00 3,90 +1,00 50,00 6,95 9, AF 4,00 +0,18 10,00 5,00 +1,20 56,00 8,40 11, AF 5,00 +0,18 12,50 6,30 +1,20 63,00 10,95 17, AF 6,30 +0,22 16,00 8,00 +1,20 71,00 14,00 29, AF 8,00 +0,22 20,00 10,10 +1,40 80,00 17,90 60, AF 10,00 +0,22 25,00 12,80 +1,40 100,00 22,50 135, AF 12,50 +0,27 31,50 16,50 +1,40 125,00 28,40 182,67 HSS centre drills with flat similar to DIN 333 form R Surface: blank * for centre holes according to DIN 332 edition 1986, part 1, form R Form R with flat Catalog d1 Tol. D h7 l1 Tol. L s Price number mm mm mm mm mm mm mm / pc RF 1,60 +0,14 4,00 4,25 +0,80 35,50 3,25 6, RF 2,00 +0,14 5,00 5,30 +0,80 40,00 4,20 6, RF 2,50 +0,14 6,30 6,70 +1,00 45,00 5,35 7, RF 3,15 +0,18 8,00 8,50 +1,00 50,00 6,95 9, RF 4,00 +0,18 10,00 10,60 +1,20 56,00 8,40 11, RF 5,00 +0,18 12,50 13,20 +1,20 63,00 10,95 17, RF 6,30 +0,22 16,00 17,00 +1,20 71,00 14,00 29, RF 8,00 +0,22 20,00 21,20 +1,40 80,00 17,90 74, RF 10,00 +0,22 25,00 26,50 +1,40 100,00 22,50 151,33 * in part with black flutes Catalog 2016 Page 15
16 HSS centre drills with flat similar to DIN 333 form B 60/120 Surface: blank * for centre holes according to DIN 332 edition 1986, part 1, form B Form B with flat Catalog d1 Tol. d2 D h7 l1 Tol. L s Price number mm mm mm mm mm mm mm mm / pc BF 1,60 +0,14 3,35 6,30 2,00 +0,80 45,00 5,35 12, BF 2,00 +0,14 4,25 8,00 2,50 +0,80 50,00 6,95 14, BF 2,50 +0,14 5,30 10,00 3,10 +1,00 56,00 8,40 17, BF 3,15 +0,18 6,70 11,20 3,90 +1,00 60,00 10,00 24, BF 4,00 +0,18 8,50 14,00 5,00 +1,20 67,00 12,65 29, BF 5,00 +0,18 10,60 18,00 6,30 +1,20 75,00 16,40 37, BF 6,30 +0,22 13,20 20,00 8,00 +1,20 80,00 17,90 62, BF 8,00 +0,22 17,00 25,00 10,10 +1,40 100,00 22,50 112, BF 10,00 +0,22 21,20 31,50 12,80 +1,40 125,00 28,40 178,62 * in part with black flutes We manufacture special centre drills: according your designs and samples from HSS, HSCO, ASP and solid carbide with many different coatings Our experience of over 50 years is your benefit. Catalog 2016 Page 16
17 HSCO NC centre drills Point angle 60 Surface: blank * Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Point angle 60 Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , ,45 HSCO NC centre drills Point angle 90 Surface: blank * Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Point angle 90 Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , , , ,94 Point angle 90 ACENT Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , , , ,38 * in part with black flutes Catalog 2016 Page 17
18 HSCO NC centre drills Point angle 90 Surface: see table Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation HSCO + TiAlN Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , , , ,07 Solid carbide NC centre drills K20/40UF Point angle 90 Surface: see table Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Solid carbide length acc. DIN 1897 Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , ,76 Solid carbide + TiAlN - extra short Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , ,26 from 6 with shank according DIN 6535 HB Catalog 2016 Page 18
19 HSCO NC centre drills Point angle 90 cutting direction: see table Surface: blank * Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation left-hand cutting Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , ,20 extra long shank, Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , ,72 HSCO NC centre drills Point angle 90 Surface: blank * Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Morse taper shank Catalog D h7 L l MK Price Catalog D h7 L l MK Price number mm mm mm / pc number mm mm mm / pc , , , , , , , ,33 * in part with black flutes Catalog 2016 Page 19
20 HSCO NC centre drills Point angle 120 Surface: blank * / TiAlN Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , , , ,94 ACENT Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , , , ,38 HSCO + TiAlN Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , ,55 extra long shank Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , ,72 * in part with black flutes Catalog 2016 Page 20
21 HSCO NC centre drills Point angle 120 Surface: blank * Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Morse taper shank Catalog D h7 L l MK Price Catalog D h7 L l MK Price number mm mm mm / pc number mm mm mm / pc , , , , , ,39 * in part with black flutes Solid carbide NC centre drills K20/40UF Point angle 142 Surface: see table Drills for accurate positioning and quick spot drilling, and for chamfering of holes in one operation Solid carbide - extra short Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , ,62 Solid carbide + TiAlN - extra short Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc , , , , , , , , , , , , , , , , , , , ,26 from 6 with shank according DIN 6535 HB Catalog 2016 Page 21
22 HSCO twist drills DIN A Type N, Surface: blank Special twist drill with bigger shank Tolerance of drill diameter: +0 / -0,004 mm Catalog d D h6 L l Price Catalog d D h6 L l Price number mm mm mm mm / pc number mm mm mm mm / pc RN 0,05 1,0 25 0,4 12, RN 0,98 1,5 25 6,5 5, RN 0,06 1,0 25 0,4 12, RN 1,00 1,5 25 6,5 5, RN 0,07 1,0 25 0,5 12, RN 1,05 1,5 25 6,5 5, RN 0,08 1,0 25 0,5 12, RN 1,10 1,5 25 7,3 5, RN 0,09 1,0 25 0,5 12, RN 1,15 1,5 25 7,3 5, RN 0,10 1,0 25 0,5 8, RN 1,20 1,5 25 8,2 5, RN 0,11 1,0 25 0,5 8, RN 1,25 1,5 25 8,2 5, RN 0,12 1,0 25 0,5 8, RN 1,30 1,5 25 8,2 5, RN 0,13 1,0 25 0,8 8, RN 1,35 1,5 25 9,2 5, RN 0,15 1,0 25 0,8 8, RN 1,40 1,5 25 9,2 5, RN 0,18 1,0 25 1,1 8, RN 1,45 1,5 25 9,2 5, RN 0,20 1,0 25 1,5 5, RN 1,50 2, ,9 5, RN 0,22 1,0 25 1,5 5, RN 1,55 2, ,2 7, RN 0,25 1,0 25 1,9 5, RN 1,60 2, ,2 7, RN 0,28 1,0 25 1,9 5, RN 1,65 2, ,2 7, RN 0,30 1,0 25 1,9 5, RN 1,70 2, ,2 7, RN 0,32 1,0 25 2,4 5, RN 1,75 2, ,2 7, RN 0,35 1,0 25 2,4 5, RN 1,80 2, ,2 7, RN 0,38 1,0 25 2,4 5, RN 1,85 2, ,2 7, RN 0,40 1,0 25 2,7 5, RN 1,90 2, ,2 7, RN 0,42 1,0 25 2,7 5, RN 1,95 2, ,2 7, RN 0,45 1,0 25 2,7 5, RN 2,00 2, ,7 7, RN 0,48 1,0 25 2,7 5, RN 2,05 2, ,7 7, RN 0,50 1,0 25 3,2 5, RN 2,10 2, ,7 7, RN 0,52 1,0 25 3,2 5, RN 2,15 2, ,7 7, RN 0,55 1,0 25 3,6 5, RN 2,20 2, ,7 7, RN 0,58 1,0 25 3,6 5, RN 2,25 2, ,7 7, RN 0,60 1,0 25 3,6 5, RN 2,30 2, ,7 7, RN 0,62 1,0 25 3,9 5, RN 2,35 2, ,7 7, RN 0,65 1,0 25 3,9 5, RN 2,40 2, ,7 7, RN 0,68 1,0 25 4,5 5, RN 2,45 2, ,7 7, RN 0,70 1,0 25 4,5 5, RN 2,50 3, ,7 7, RN 0,72 1,0 25 4,5 5, RN 2,55 3, ,7 7, RN 0,75 1,0 25 4,5 5, RN 2,60 3, ,7 7, RN 0,78 1,0 25 5,0 5, RN 2,65 3, ,7 7, RN 0,80 1,5 25 5,0 5, RN 2,70 3, ,7 7, RN 0,82 1,5 25 5,0 5, RN 2,75 3, ,7 7, RN 0,85 1,5 25 5,0 5, RN 2,80 3, ,7 7, RN 0,88 1,5 25 5,7 5, RN 2,85 3, ,7 7, RN 0,90 1,5 25 5,7 5, RN 2,90 3, ,7 7, RN 0,92 1,5 25 5,7 5, RN 2,95 3, ,7 7, RN 0,95 1,5 25 5,7 5, RN 3,00 3, ,7 7,51 Also available with other diameters. Sold in whole packing units of 10 pieces only Catalog 2016 Page 22
23 Solid carbide twist drills K20/30 UF similar to DIN A Type N, Surface: blank Special twist drill with bigger shank Tolerance of drill diameter: +0 / -0,004 mm Catalog d D h6 L l Price Catalog d D h6 L l Price number mm mm mm mm / pc number mm mm mm mm / pc RN 0,05 1,0 25 0,4 18, RN 0,67 1,0 25 3,9 7, RN 0,10 1,0 25 0,5 10, RN 0,68 1,0 25 4,5 7, RN 0,15 1,0 25 0,8 10, RN 0,69 1,0 25 4,5 7, RN 0,20 1,0 25 1,5 7, RN 0,70 1,0 25 4,5 7, RN 0,25 1,0 25 1,9 7, RN 0,71 1,0 25 4,5 7, RN 0,30 1,0 25 1,9 7, RN 0,72 1,0 25 4,5 7, RN 0,31 1,0 25 2,4 7, RN 0,73 1,0 25 4,5 7, RN 0,32 1,0 25 2,4 7, RN 0,74 1,0 25 4,5 7, RN 0,33 1,0 25 2,4 7, RN 0,75 1,0 25 4,5 7, RN 0,34 1,0 25 2,4 7, RN 0,76 1,0 25 5,0 7, RN 0,35 1,0 25 2,4 7, RN 0,77 1,0 25 5,0 7, RN 0,36 1,0 25 2,4 7, RN 0,78 1,0 25 5,0 7, RN 0,37 1,0 25 2,4 7, RN 0,80 1,5 25 5,0 7, RN 0,38 1,0 25 2,4 7, RN 0,82 1,5 25 5,0 7, RN 0,39 1,0 25 2,7 7, RN 0,85 1,5 25 5,0 7, RN 0,40 1,0 25 2,7 7, RN 0,88 1,5 25 5,7 7, RN 0,41 1,0 25 2,7 7, RN 0,90 1,5 25 5,7 7, RN 0,42 1,0 25 2,7 7, RN 0,92 1,5 25 5,7 7, RN 0,43 1,0 25 2,7 7, RN 0,95 1,5 25 5,7 7, RN 0,44 1,0 25 2,7 7, RN 0,98 1,5 25 6,5 7, RN 0,45 1,0 25 2,7 7, RN 1,00 1,5 25 6,5 7, RN 0,46 1,0 25 2,7 7, RN 1,05 1,5 25 6,5 7, RN 0,47 1,0 25 2,7 7, RN 1,10 1,5 25 7,3 7, RN 0,48 1,0 25 2,7 7, RN 1,15 1,5 25 7,3 7, RN 0,49 1,0 25 3,2 7, RN 1,20 1,5 25 8,2 7, RN 0,50 1,0 25 3,2 7, RN 1,25 1,5 25 8,2 7, RN 0,51 1,0 25 3,2 7, RN 1,30 1,5 25 8,2 7, RN 0,52 1,0 25 3,2 7, RN 1,35 1,5 25 9,2 7, RN 0,53 1,0 25 3,2 7, RN 1,40 1,5 25 9,2 7, RN 0,54 1,0 25 3,6 7, RN 1,45 1,5 25 9,2 7, RN 0,55 1,0 25 3,6 7, RN 1,50 1,5 25 9,2 7, RN 0,56 1,0 25 3,6 7, RN 1,55 2, ,2 9, RN 0,57 1,0 25 3,6 7, RN 1,60 2, ,2 9, RN 0,58 1,0 25 3,6 7, RN 1,65 2, ,2 9, RN 0,59 1,0 25 3,6 7, RN 1,70 2, ,2 9, RN 0,60 1,0 25 3,6 7, RN 1,75 2, ,2 9, RN 0,61 1,0 25 3,9 7, RN 1,80 2, ,2 9, RN 0,62 1,0 25 3,9 7, RN 1,85 2, ,2 9, RN 0,63 1,0 25 3,9 7, RN 1,90 2, ,2 9, RN 0,64 1,0 25 3,9 7, RN 1,95 2, ,2 9, RN 0,65 1,0 25 3,9 7, RN 1,98 2, ,2 9, RN 0,66 1,0 25 3,9 7, RN 2,00 2, ,2 9,03 Also available with other diameters. Sold in whole packing units of 10 pieces only Catalog 2016 Page 23
24 Solid carbide twist drills K20 F DIN 6539 Type N, Surface: blank Twist drill with point angle of 118 for drilling cast iron and non-ferrous light metals ACENT Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc RN 1, , RN 4, , RN 1, , RN 4, , RN 1, , RN 4, , RN 1, , RN 4, , RN 1, , RN 4, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 2, , RN 5, , RN 2, , RN 5, , RN 2, , RN 5, , RN 2, , RN 5, , RN 2, , RN 5, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 7, , RN 2, , RN 7, , RN 3, , RN 7, , RN 3, , RN 8, , RN 3, , RN 8, , RN 3, , RN 8, , RN 3, , RN 9, , RN 3, , RN 9, , RN 3, , RN 10, , RN 3, , RN 10, , RN 3, , RN 10, , RN 3, , RN 11, , RN 4, , RN 11, , RN 4, , RN 12, , RN 4, , RN 12, , RN 4, , RN 13, , RN 4, ,44 Also available with other diameters and TiAlN coated Catalog 2016 Page 24
25 Solid carbide twist drills K20 F similar to DIN 338 Type N, Surface: blank Twist drill with point angle of 118 for drilling cast iron and non-ferrous light metals ACENT Catalog D h7 L l Price Catalog D h7 L l Price number mm mm mm / pc number mm mm mm / pc RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 1, , RN 5, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 6, , RN 2, , RN 7, , RN 3, , RN 7, , RN 3, , RN 7, , RN 3, , RN 7, , RN 3, , RN 8, , RN 3, , RN 8, , RN 3, , RN 8, , RN 3, , RN 8, , RN 3, , RN 9, , RN 3, , RN 9, , RN 3, , RN 9, , RN 4, , RN 9, , RN 4, , RN 9, , RN 4, , RN 10, , RN 4, , RN 10, , RN 4, , RN 10, , RN 4, , RN 11, , RN 4, , RN 11, , RN 4, , RN 12, , RN 4, , RN 12, , RN 4, , RN 13, ,64 Also available with other diameters and TiAlN coated Catalog 2016 Page 25
26 Carbide-tipped twist drills K20/40 F DIN 8037 Surface: blank HSS twist drill with carbide edges for steel and cast iron up to 100 N/mm² HSS with carbide edges Catalog D h8 L l1 Price Catalog D h8 L l1 Price number mm mm mm / pc number mm mm mm / pc RN 2, , RN 10, , RN 3, , RN 10, , RN 3, , RN 10, , RN 3, , RN 10, , RN 3, , RN 11, , RN 3, , RN 11, , RN 4, , RN 11, , RN 4, , RN 12, , RN 4, , RN 12, , RN 4, , RN 12, , RN 5, , RN 12, , RN 5, , RN 13, , RN 5, , RN 13, , RN 5, , RN 14, , RN 5, , RN 14, , RN 6, , RN 15, , RN 6, , RN 15, , RN 6, , RN 16, , RN 7, , RN 16, , RN 7, , RN 17, , RN 7, , RN 17, , RN 8, , RN 18, , RN 8, , RN 18, , RN 8, , RN 19, , RN 9, , RN 19, , RN 9, , RN 20, , RN 9, ,24 Drills are also available similar to DIN 338 and DIN 340 Catalog 2016 Page 26
27 Carbide-tipped twist drills K20/40 F DIN 8041 Surface: blank HSS twist drill with carbide edges for steel and cast iron up to 100 N/mm² HSS with carbide edges Catalog D h8 L l1 MT Price Catalog D h8 L l1 MT Price number mm mm mm / pc number mm mm mm / pc RN 8, , RN 17, , RN 8, , RN 18, , RN 9, , RN 18, , RN 9, , RN 19, , RN 10, , RN 19, , RN 10, , RN 20, , RN 10, , RN 21, , RN 11, , RN 22, , RN 11, , RN 23, , RN 12, , RN 23, , RN 12, , RN 24, , RN 13, , RN 25, , RN 13, , RN 26, , RN 14, , RN 27, , RN 14, , RN 28, , RN 15, , RN 29, , RN 15, , RN 30, , RN 16, , RN 16, , RN 17, ,15 Drills are also available similar to DIN 345 We supply precision tools like centre drills, twist drills, step drills, core drills and countersinks according DIN and ZEBO standard according your designs and samples from HSS, HSCO, ASP and solid carbide with many different coatings Catalog 2016 Page 27
28 Solid carbide twist drills K20/40 UF DIN 6537 short series Type N, Shank: DIN 6535 HA Surface: TiAlN-coated for steel and cast iron up to 1200 N/mm² Drilling depth up to 3xD - without coolant holes Catalog D m7 d h6 L l Price Catalog D m7 d h6 L l Price number mm mm mm mm / pc number mm mm mm mm / pc RN 3,00 6, , RN 9,30 10, , RN 3,20 6, , RN 9,50 10, , RN 3,30 6, , RN 9,80 10, , RN 3,50 6, , RN 9,90 10, , RN 3,70 6, , RN 10,00 10, , RN 3,80 6, , RN 10,20 12, , RN 3,90 6, , RN 10,50 12, , RN 4,00 6, , RN 10,80 12, , RN 4,20 6, , RN 11,00 12, , RN 4,30 6, , RN 11,50 12, , RN 4,50 6, , RN 11,80 12, , RN 4,70 6, , RN 12,00 12, , RN 4,80 6, , RN 12,50 14, , RN 4,90 6, , RN 12,80 14, , RN 5,00 6, , RN 13,00 14, , RN 5,20 6, , RN 13,50 14, , RN 5,30 6, , RN 13,80 14, , RN 5,50 6, , RN 14,00 14, , RN 5,70 6, , RN 14,50 16, , RN 5,80 6, , RN 14,80 16, , RN 5,90 6, , RN 15,00 16, , RN 6,00 6, , RN 15,50 16, , RN 6,20 8, , RN 15,80 16, , RN 6,30 8, , RN 16,00 16, , RN 6,50 8, , RN 16,50 18, , RN 6,70 8, , RN 17,00 18, , RN 6,80 8, , RN 17,50 18, , RN 7,00 8, , RN 18,00 18, , RN 7,20 8, , RN 18,50 20, , RN 7,40 8, , RN 19,00 20, , RN 7,50 8, , RN 19,50 20, , RN 7,80 8, , RN 20,00 20, , RN 8,00 8, , RN 8,20 10, , RN 8,30 10, , RN 8,50 10, , RN 8,70 10, , RN 8,80 10, , RN 9,00 10, , RN 9,20 10, ,66 Also available in types for stainless steel, titanium alloys and non-ferrous light metals. Also available with shank form HE, coolant holes and other diameters. Catalog 2016 Page 28
29 Solid carbide twist drills K20/40 UF DIN 6537 long series Type N, Shank: DIN 6535 HAK Surface: TiAlN-coated for steel and cast iron up to 1200 N/mm² Drilling depth up to 5xD - with coolant holes Catalog D m7 d h6 L l Price Catalog D m7 d h6 L l Price number mm mm mm mm / pc number mm mm mm mm / pc RD 3,00 6, , RD 9,30 10, , RD 3,20 6, , RD 9,50 10, , RD 3,30 6, , RD 9,80 10, , RD 3,50 6, , RD 9,90 10, , RD 3,70 6, , RD 10,00 10, , RD 3,80 6, , RD 10,20 12, , RD 3,90 6, , RD 10,50 12, , RD 4,00 6, , RD 10,80 12, , RD 4,20 6, , RD 11,00 12, , RD 4,30 6, , RD 11,50 12, , RD 4,50 6, , RD 11,80 12, , RD 4,70 6, , RD 12,00 12, , RD 4,80 6, , RD 12,50 14, , RD 4,90 6, , RD 12,80 14, , RD 5,00 6, , RD 13,00 14, , RD 5,20 6, , RD 13,50 14, , RD 5,30 6, , RD 13,80 14, , RD 5,50 6, , RD 14,00 14, , RD 5,70 6, , RD 14,50 16, , RD 5,80 6, , RD 14,80 16, , RD 5,90 6, , RD 15,00 16, , RD 6,00 6, , RD 15,50 16, , RD 6,20 8, , RD 15,80 16, , RD 6,30 8, , RD 16,00 16, , RD 6,50 8, , RD 16,50 18, , RD 6,70 8, , RD 17,00 18, , RD 6,80 8, , RD 17,50 18, , RD 7,00 8, , RD 18,00 18, , RD 7,20 8, , RD 18,50 20, , RD 7,40 8, , RD 19,00 20, , RD 7,50 8, , RD 19,50 20, , RD 7,80 8, , RD 20,00 20, , RD 8,00 8, , RD 8,20 10, , RD 8,30 10, , RD 8,50 10, , RD 8,70 10, , RD 8,80 10, , RD 9,00 10, , RD 9,20 10, ,16 Also available in types for stainless steel, titanium alloys and non-ferrous light metals. Also available with shank form HEK, without coolant holes and other diameters. Catalog 2016 Page 29
30 Solid carbide twist drills K20/40 UF with double land shank: DIN 6535 HAK Surface: TiAlN-coated for steel and cast iron up to 1200 N/mm² Drilling depth up to 8xD - with coolant holes Catalog D H7 d h6 L l Price Catalog D H7 d h6 L l Price number mm mm mm mm / pc number mm mm mm mm / pc HD 5,00 6, , HD 10,80 12, , HD 5,50 6, , HD 11,00 12, , HD 5,80 6, , HD 11,50 12, , HD 6,00 6, , HD 11,80 12, , HD 6,50 8, , HD 12,00 12, , HD 6,80 8, , HD 12,50 14, , HD 7,00 8, , HD 12,80 14, , HD 7,50 8, , HD 13,00 14, , HD 7,80 8, , HD 13,80 16, , HD 8,00 8, , HD 14,00 16, , HD 8,50 10, , HD 14,80 16, , HD 8,80 10, , HD 15,00 16, , HD 9,00 10, , HD 15,80 16, , HD 9,50 10, , HD 16,00 16, , HD 9,80 10, , HD 17,80 18, , HD 10,00 10, , HD 18,00 18, , HD 10,20 12, , HD 19,80 20, , HD 10,50 12, , HD 20,00 20, ,48 Drilling depth up to 12xD - with coolant holes Catalog D H7 d h6 L l Price Catalog D H7 d h6 L l Price number mm mm mm mm / pc number mm mm mm mm / pc HD 5,00 6, , HD 10,80 12, , HD 5,50 6, , HD 11,00 12, , HD 5,80 6, , HD 11,50 12, , HD 6,00 6, , HD 11,80 12, , HD 6,50 8, , HD 12,00 12, , HD 6,80 8, , HD 12,50 14, , HD 7,00 8, , HD 12,80 14, , HD 7,50 8, , HD 13,00 14, , HD 7,80 8, , HD 13,80 14, , HD 8,00 8, , HD 14,00 14, , HD 8,50 10, , HD 14,80 16, , HD 8,80 10, , HD 15,00 16, , HD 9,00 10, , HD 15,80 16, , HD 9,50 10, , HD 16,00 16, , HD 9,80 10, , HD 17,80 18, , HD 10,00 10, , HD 18,00 18, , HD 10,20 12, , HD 19,80 20, , HD 10,50 12, , HD 20,00 20, ,15 Also available with shank form HEK, other diameters and for stainless steel, titanium alloys and non-ferrous light metals. Catalog 2016 Page 30
31 HSCO step drills for centre holes form D Surface: blank * Standard drills used to produce centre holes according to DIN 332, edition 1973, part 2, form D Form D with straight shank Catalog for D h8 d1 h8 d2 h9 L l1 l2 l3 Price number thread mm mm mm mm mm mm mm / pc M03DR M 3 6,00 2,50 3,20 56,00 10,00 11,50 20,00 20, M04DR M 4 8,00 3,30 4,30 63,00 11,00 12,60 23,00 21, M05DR M 5 10,00 4,20 5,30 67,00 13,00 15,15 27,00 22, M06DR M 6 12,50 5,00 6,40 71,00 16,00 18,90 33,00 26, M08DR M 8 14,00 6,80 8,40 88,00 19,50 23,00 41,00 35, M10DR M10 16,00 8,50 10,50 94,00 23,00 27,70 47,00 39, M12DR M12 20,00 10,20 13,00 105,00 28,00 34,50 59,00 50, M16DR M16 25,00 14,00 17,00 132,00 33,00 41,30 67,00 89, M20DR M20 31,50 17,50 21,00 145,00 38,00 48,35 76,00 125, M24DR M24 40,00 21,00 25,00 160,00 45,00 57,00 90,00 224,77 HSCO step drills for centre holes form D Surface: blank * Standard drills used to produce centre holes according to DIN 332, edition 1973, part 2, form D Form D - with straight shank and flat Catalog for D h8 d1 h8 d2 h9 L l1 l2 s Price number thread mm mm mm mm mm mm mm / pc M04DR M 4 8,00 3,30 4,30 63,00 11,00 12,60 6,75 25, M05DR M 5 10,00 4,20 5,30 67,00 13,00 15,15 8,45 27, M06DR M 6 12,50 5,00 6,40 71,00 16,00 18,90 10,45 31, M08DR M 8 14,00 6,80 8,40 88,00 19,50 23,00 12,50 42, M10DR M10 16,00 8,50 10,50 94,00 23,00 27,70 14,85 45, M12DR M12 20,00 10,20 13,00 105,00 28,00 34,50 18,45 58, M16DR M16 25,00 14,00 17,00 132,00 33,00 41,30 23,40 98, M20DR M20 31,50 17,50 21,00 145,00 38,00 48,35 29,35 144, M24DR M24 40,00 21,00 25,00 160,00 45,00 57,00 36,50 269,73 from M8 with coolant grooves * in part with black flutes Catalog 2016 Page 31
32 HSCO step drills for centre holes form DS Surface: blank * Standard drills used to produce centre holes acc. to DIN 332, edition 1973, part 2, form DS Form DS - with straight shank and flat Catalog for D h8 d1 h8 d2 h9 L l1 l2 s Price number thread mm mm mm mm mm mm mm / pc M04DS M 4 8,00 3,30 4,30 63,00 11,00 12,60 6,75 30, M05DS M 5 10,00 4,20 5,30 67,00 13,00 15,15 8,45 35, M06DS M 6 12,50 5,00 6,40 71,00 16,00 18,90 10,45 42, M08DS M 8 14,00 6,80 8,40 88,00 19,50 23,00 12,50 62, M10DS M10 18,00 8,50 10,50 94,00 23,00 27,70 16,40 73, M12DS M12 20,00 10,20 13,00 105,00 28,00 34,50 18,45 83, M16DS M16 26,00 14,00 17,00 132,00 33,00 41,30 23,40 132, M20DS M20 31,50 17,50 21,00 145,00 38,00 48,35 29,35 273,45 HSCO step drills for centre holes form DR Surface: blank * Standard drills used to produce centre holes acc. to DIN 332, edition 1973, part 2, form DR Form DR - with straight shank and flat Catalog for D h8 d1 h8 d2 h9 L l1 l2 s Price number thread mm mm mm mm mm mm mm / pc M04RR M 4 8,00 3,30 4,30 63,00 11,00 12,60 6,75 29, M05RR M 5 10,00 4,20 5,30 67,00 13,00 15,15 8,45 30, M06RR M 6 12,50 5,00 6,40 71,00 16,00 18,90 10,45 34, M08RR M 8 14,00 6,80 8,40 88,00 19,50 23,00 12,50 45, M10RR M10 16,00 8,50 10,50 94,00 23,00 27,70 14,85 51, M12RR M12 20,00 10,20 13,00 105,00 28,00 34,50 18,45 65, M16RR M16 25,00 14,00 17,00 132,00 33,00 41,30 23,40 99, M20RR M20 31,50 17,50 21,00 145,00 38,00 48,35 29,35 153, M24RR M24 40,00 21,00 25,00 160,00 45,00 57,00 36,50 275,57 from M8 with coolant grooves * in part with black flutes Catalog 2016 Page 32
33 HSCO step drills for centre holes form D Surface: blank * Standard drills used to produce centre holes acc. to DIN 332, edition 1973, part 2, form D Form D with Morse taper shank Catalog for D h8 d1 h8 d2 h9 L l1 l2 MT Price number thread mm mm mm mm mm mm / pc M08DR M 8 14,00 6,80 8,40 110,00 19,50 23, , M10DR M10 16,00 8,50 10,50 131,00 23,00 27, , M12DR M12 20,00 10,20 13,00 145,00 28,00 34, , M16DR M16 25,00 14,00 17,00 172,00 33,00 41, , M20DR M20 31,50 17,50 21,00 184,00 38,00 48, , M24DR M24 40,00 21,00 25,00 222,00 45,00 57, , M30DR M30 48,00 26,50 31,00 270,00 58,00 73, ,62 * in part with black flutes We produce at short notice from DIN tools Step drills Step Core drills Step countersinks Step endmills Within a few working days we supply multi step tools for the efficient production of your drillings Catalog 2016 Page 33
34 HSCO step drills ZEBO standard, countersink angle 90 Surface: blank * for thread core holes according to DIN 336 part 1 and countersinking 90 HSCO, for thread core holes Catalog for D h8 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0390 M 3 3,50 2,50 52,00 20,00 8, , M0490 M 4 4,50 3,30 58,00 24,00 11, , M0590 M 5 6,00 4,20 66,00 28,00 13, , M0690 M 6 8,00 5,00 79,00 37,00 16, , M0890 M 8 10,00 6,80 89,00 43,00 21, , M1090 M10 12,00 8,50 102,00 51,00 25, , M1290 M12 14,00 10,20 107,00 54,00 30, ,38 * in part with black flutes Solid carbide step drills K20/40 UF ZEBO standard, countersink angle 90 Surface: TiAlN- coated for thread core holes according to DIN 336 part 1 and countersinking 90 Solid carbide + TiAlN, for thread core holes Catalog for D h6 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0390 M 3 4,00 2,50 55,00 22,00 8, , M0490 M 4 5,00 3,30 62,00 26,00 11, , M0590 M 5 6,00 4,20 66,00 28,00 13, , M0690 M 6 8,00 5,00 79,00 37,00 16, , M0890 M 8 10,00 6,80 89,00 43,00 21, , M1090 M10 12,00 8,50 102,00 51,00 25, , M1290 M12 14,00 10,20 107,00 54,00 30, , M1490 M14 16,00 12,00 115,00 58,00 34, , M1690 M16 18,00 14,00 123,00 62,00 38, ,06 Catalog 2016 Page 34
35 HSS subland twist drills DIN 8378, countersink angle 90 Surface: vaporized for thread core holes according to DIN 336 part 1 and countersinking 90 For thread core holes Catalog for D h8 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0302 M 3 3,40 2,50 70,00 39,00 8, , M0402 M 4 4,50 3,30 80,00 47,00 11, , M0502 M 5 5,50 4,20 93,00 57,00 13, , M0602 M 6 6,60 5,00 101,00 63,00 16, , M0802 M 8 9,00 6,80 125,00 81,00 21, , M1002 M10 11,00 8,50 142,00 94,00 25, , M1202 M12 13,50 10,20 160,00 108,00 30, ,88 HSS subland twist drills DIN 8379, countersink angle 90 Surface: vaporized for thread core holes according to DIN 336 part 1 and countersinking 90 For thread core holes Catalog for D h8 d1 h8 L l2 l1 C. sink MT Price number thread mm mm mm mm mm angle / pc M0802 M 8 9,00 6,80 162,00 81,00 21, , M1002 M10 11,00 8,50 175,00 94,00 25, , M1202 M12 13,50 10,20 189,00 108,00 30, , M1402 M14 15,50 12,00 218,00 120,00 34, , M1602 M16 17,50 14,00 228,00 130,00 38, , M1802 M18 20,00 15,50 238,00 140,00 43, , M2002 M20 22,00 17,50 248,00 150,00 47, ,12 Catalog 2016 Page 35
36 HSCO step drills ZEBO standard, countersink angle 90 Surface: blank * for through-holes according to DIN ISO 273 with DIN 74 part 1, form A, fine series For through-holes Catalog for D h8 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0390 M 3 6,00 3,20 66,00 28,00 9, , M0490 M 4 8,00 4,30 79,00 37,00 11, , M0590 M 5 10,00 5,30 89,00 43,00 13, , M0690 M 6 11,50 6,40 95,00 47,00 15, , M0890 M 8 15,00 8,40 111,00 56,00 19, , M1090 M10 19,00 10,50 127,00 64,00 23, ,43 * in part with black flutes HSS subland twist drills DIN 8374, countersink angle 90 Surface: vaporized for through-holes according to DIN ISO 273 with DIN 74 part 1, form A, fine series For through-holes Catalog for D h8 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0301 M 3 6,00 3,20 93,00 57,00 9, , M0401 M 4 8,00 4,30 117,00 75,00 11, , M0501 M 5 10,00 5,30 133,00 87,00 13, , M0601 M 6 11,50 6,40 142,00 94,00 15, , M0801 M 8 15,00 8,40 169,00 114,00 19, , M1001 M10 19,00 10,50 198,00 135,00 23, ,35 Catalog 2016 Page 36
37 HSCO step drills ZEBO standard, countersink angle 180 Surface: blank * for through-holes according to DIN ISO 273 DIN 74 part 2, form H,J,K, medium series For through-holes Catalog for D h8 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0318 M 3 6,00 3,40 66,00 28,00 9, , M0418 M 4 8,00 4,50 79,00 37,00 11, , M0518 M 5 10,00 5,50 89,00 43,00 13, , M0618 M 6 11,00 6,60 95,00 47,00 15, , M0818 M 8 15,00 9,00 111,00 56,00 19, , M1018 M10 18,00 11,00 123,00 62,00 23, , M1218 M12 20,00 13,50 131,00 66,00 27, ,16 * in part with black flutes HSS subland twist drills DIN 8376, countersink angle 180 Surface: vaporized for through-holes according to DIN ISO 273 DIN 74 part 2, form H,J,K, medium series For through-holes Catalog for D h8 d1 h8 L l2 l1 C. sink Price number thread mm mm mm mm mm angle / pc M0302 M 3 6,00 3,40 93,00 57,00 9, , M0402 M 4 8,00 4,50 117,00 75,00 11, , M0502 M 5 10,00 5,50 133,00 87,00 13, , M0602 M 6 11,00 6,60 142,00 94,00 15, , M0802 M 8 15,00 9,00 169,00 114,00 19, , M1002 M10 18,00 11,00 191,00 130,00 23, ,71 Catalog 2016 Page 37
38 HSS subland twist drills DIN 8377, countersink angle 180 Surface: vaporized for through-holes according to DIN ISO 273 DIN 74 part 2, form H,J,K, medium series For through-holes Catalog for D h8 d1 h8 L l2 l1 C. sink MT Price number thread mm mm mm mm mm angle / pc M0502 M 5 10,00 5,50 168,00 87,00 13, , M0602 M 6 11,00 6,60 175,00 94,00 15, , M0802 M 8 15,00 9,00 212,00 114,00 19, , M1002 M10 18,00 11,00 228,00 130,00 23, , M1202 M12 20,00 13,50 238,00 140,00 27, , M1402 M14 24,00 15,50 281,00 160,00 31, , M1602 M16 26,00 17,50 286,00 165,00 35, , M1802 M18 30,00 20,00 296,00 175,00 39, , M2002 M20 33,00 22,00 334,00 185,00 43, ,83 You did not find the desired tool? On the following pages you will find inquiry forms for special tools. We manufacture at short notice from DIN tools or as complete new preparation, from HSS, HSCO, ASP and solid carbide. All tools are available with many different coatings. Catalog 2016 Page 38
39 Please download the GRANLUND - catalogue from our website We deliver countersinks and counterbores in DIN sizes or according your drawings in HSS, carbide tipped or solid carbide uncoated or with many special coatings Catalog 2016 Page 39
Preiskatalog ZEBO Präzisionswerkzeuge Hermann Pfisterer GmbH. Postfach 1631 D Bietigheim-Bissingen
Preiskatalog 2016 ZEBO Präzisionswerkzeuge Hermann Pfisterer GmbH Postfach 1631 D-74306 Bietigheim-Bissingen Schleifmühle 7 D-74321 Bietigheim-Bissingen Telefon +49 (0) 7142 920050 Telefax +49 (0) 7142
MehrSENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS
SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS 122 SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS DIN DIN Qualität Quality
MehrCARBIDE. Being the best through innovation NC-SPOTTING DRILLS NC-ANBOHRER. - CENTERING and CHAMFERING. - Zentrier & Abfasen
Being the best through innovation NC-ANBOHRER - ING and CHAMFERING - Zentrier & Abfasen SELECTION GUIDE SOLID For General materials, Cast steels, Cast iron, Non-ferrous materials ITEM MODEL DESCRIPTION
MehrSENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS
120 SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS DIN DIN Qualität Quality
MehrGH-K. Chatter-free front countersinking of a big countersink range with one single tool.
GH-K Chatter-free front countersinking of a big countersink range with one single tool. GH-K Werkzeuge (Dreischneider) mit interner Kühlung GH-K Tools (three lips) with internal cooling GH-K 25 GH-K 45
MehrVOLLHARTMETALL-DIAMANT-REIBAHLENPROGRAMM
VOLLHARTMETALL-DIAMANT-REIBAHLENPROGRAMM Reamer Description DIN Reamer Length Part Number Page Number Reamer Type Material Flutes Coating Ø in mm Coating Point Angle Direction of Cut Flute Style Techn.
MehrVHM- und PM-HSS-Spiralbohrer
VHM- und PM-HSS-Spiralbohrer Solid carbide and PM-HSS drills Ausführung - 3 x D - 3 x D für Aluminium - 3 x D für rostfreie Stähle - 3 x D PM-HSS Spiralbohrer - 5 x D - 5 x D für Aluminium - 5 x D für
MehrAufbohrer Kegelsenker. Core Drills Countersinks
Aufbohrer Kegelsenker Core Drills Countersinks 633 634 Aufbohrer Kegelsenker Core Drills Countersinks Zeichenerklärung Key to symbols SCHEIDSTOFF / TOOL MATERIAL VHM VHM / Feinstkorn Solid carbide / Micro
MehrVHM - HOCHLEISTUNGSBOHRER
2012 VHM - HOCHLEISTUNGSBOHRER Vielfalt vereint Für schnelle und präzise Bohrungen www.kempf-tools.de Inhaltsverzeichnis KLEINSTBOHRER ohne IK ab Ø 0,80 bis Ø 3,00 4-5 4 x D 7 x D KB184 KB187 KLEINSTBOHRER
MehrNC-SPOTTING DRILLS HSS NC-ANBOHRER. - HSS(8% COBALT) Centering and Chamfering of Holes. Being the best through innovation
Being the best through innovation NC-ANBOHRER - (8% COBALT) Centering and Chamfering of Holes - -Co8 NC-ANBOHRER Zum Zentrieren und Anfasen SELECTION GUIDE (8% Cobalt) Centering and Chamfering of Holes
MehrV7 MILLS EMB41 EMB42 EMB43 EMB44 EMB14 EMB39 EMB15 EMB40 EMB74 EMB75 EMB72 EMB73 EMB12 EMB37 EMB13 EMB38. Aussergewöhnliche Standzeit EMB78 EMB79
V7 MILLS SELECTION GUIDE COMPLETELY NEW MILLING GENERATION Frischer Wind beim Fräsen - Breakup of the chattering and Minimized tool deflection by optimum design for faster & deeper machining Beendet Vibrationen
MehrProduktkatalog Hakura I Knollengraben 128, Ravensburg I Telefon: I Telefax: I
Produktkatalog 2012. Hakura I Knollengraben 128, 88212 Ravensburg I Telefon: 0751 14597 I Telefax: 0751 32128 I E-Mail: post@hakura.de Inhaltsverzeichnis Vollhartmetall - Spiralbohrer ähnl. DIN 1897/6539
MehrNC-SPOTTING DRILLS HSS NC-ANBOHRER. Being the best through innovation - HSS(8% COBALT) Centering and Chamfering of Holes. - HSS-Co8 NC-ANBOHRER
Being the best through innovation NC-ANBOHRER - (8% COBALT) Centering and Chamfering of Holes - -Co8 NC-ANBOHRER Zum Zentrieren und Anfasen SELECTION GUIDE (8% Cobalt) Centering and Chamfering of Holes
MehrQualitätswerkzeuge. Quality Tools. WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application
WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application Qualitätswerkzeuge WAB POWERCUT Kernbohrsystem Das WAB POWERCUT Kernbohrsystem hat gegenüber dem Bohren mit Spiralbohrern
MehrNC-SPOTTING DRILLS HSS NC-ANBOHRER. Being the best through innovation - HSS(8% COBALT) Centering and Chamfering of Holes. - HSS-Co8 NC-ANBOHRER
Being the best through innovation NC-ANBOHRER - (8% COBALT) Centering and Chamfering of Holes - -Co8 NC-ANBOHRER Zum Zentrieren und Anfasen SELECTION GUIDE (8% Cobalt) Centering and Chamfering of Holes
MehrVollhartmetallfräser. Solid carbide end mills
Vollhartmetallfräser Solid carbide end mills Vollhartmetallfräser Carbide end mills Inspiriert von einem brandneuen Schneidkonzept entwickelten wir in den vergangenen Jahren die FX Fräser-Serien HPC (High
Mehr4 FÜHRUNGSFASEN FÜR BESSERE BOHRUNGS GERADHEIT 4 margin lands for a better hole straightness
2019 VHM Tiefloch-Kleinstbohrer mit Innenkühlung 5xD - 6019 8xD - 6029 12xD - 6030 20xD - 6031 DIE HOCH POLIERTE UND GELÄPPTE OBERFLÄCHE, VOR UND NACH DEM BESCHICHTEN VERBESSERT DIE SPANABFUHR The highly
MehrMFF Mini-Formfräser. Fasen, Entgraten, Fräsen, Rückwärtssenken. MFF Mini-Form End Mills Chamfering, Deburring, Cutting, Reverse Lowering
MFF Mini-Formfräser Fasen, Entgraten, Fräsen, Rückwärtssenken MFF Chamfering, Deburring, Cutting, Reverse Lowering Ihr Anspruch - unsere Zerspanungslösung Your Requirement - our Machining Solution Seit
MehrZerspanungswerkzeuge und Zubehör. Cutting Tools and Accessories. Inhaltsverzeichnis / Index
SS / SS-Co Werkzeuge Zerspanungswerkzeuge und Zubehör SS / SS-Co Tools Cutting Tools and Accessories Inhaltsverzeichnis / Index Inhaltsverzeichnis Index Spiralbohrer Twist Drills Seite 1-54 Page 1-54
MehrRECORD HD. Schnittwertempfehlung / Cutting data TECHNISCHE DATEN / TECHNICAL DATA
Der ILIX Bohrer ist seit Jahren eine feststehende Größe in der Stahlbearbeitung. The ILIX is an established drill for the machining of steel. 26 TECHNISCHE DATEN / TECHNICAL DATA Hauptmerkmale: Spanbrechende
MehrQualitätswerkzeuge. Quality Tools. WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application. Kegelsenker 90 DIN 335 C
Qualitätswerkzeuge Kegelsenker 90 DIN 335 C HSS, HSS-E, TiN-beschichtet Geschliffene Kegelsenker in absoluter Spitzenqualität zum grat- und ratterfreien Entgraten und Ansenken HSS Flachsenker DIN 373 HSS
MehrRECORD EVOLUTION VA 34
EVOLUTION EVOLUTION TECHNISCHE DATEN / TECHNICAL DATA Der neue Record Evolution garantiert durch seine spezielle Nutengeometrie idealen Spantransport bei hohen Schnittgeschwindigkeiten und, durch die Form
Mehr2.2 VOLLHARTMETALL REIBAHLEN MICROREIBAHLEN SOLID CARBIDE REAMERS MICRO REAMERS JETZT FÜR SIE ONLINE! NOW ONLINE FOR YOU!
WWW.FAUST-TOOLS.DE VOLLHARTMETALL REIBAHLEN REIBAHLEN SOLID CARBIDE REAMERS REAMERS KONTAKT CONTACT. ONLINE FAUST TOOLS JETT FÜR SIE ONLINE! NOW ONLINE FOR YOU! BERGWEG D-0 Oberursel info@faust-tools.de
Mehr382/383 HOCHLEISTUNGS-SCHEIBENFRÄSER HIGH PERFORMANCE DISC MILLING CUTTER
HOCHLEISTUNGS-SCHEIBENRÄSER HIGH PERORMANCE DISC MILLING CUTTER 382/383 Universelle Schneidengeometrie für Stahl und Leichtmetall 10 positiver Spanwinkel Gute Spanausbringung Hervorragende Schnittleistung
MehrAufbohrer Kegelsenker Core Drills Countersinks
Aufbohrer Kegesenker Core Dris Countersinks ZEICHENERKLÄRUNG / LEGEND SCHNEIDSTOFF / TOOL MATERIAL VHM VHM / Soid carbide BESCHICHTUNG / COATING TN TiN TF TiAIN 60 INHALT / INDEX Aufbohrer / Core dris
MehrZertifiziert nach DIN EN ISO 9001 siczert Zertifizierungen GmbH. Kegelsenker-Programm
ertifiziert nach DN EN SO 9001 sicert ertifizierungen GmbH Kegelsenker-Programm Von-Miller-Str. 1 Telefon: +49(0) 9401-5978-0 Telefax: +49(0) 9401-5978-29 9092 Barbing/Unterheising E-Mail: info@eichinger-stelzl.de
MehrDIN 338 N -geschliffen- Präzisionsausführung Weitere Abmessungen auf Anfrage. DIN 338 N -fully ground-, short, precision Other dimensions upon demand
Spiralb hrer HSS 91201 IN 338 N -geschliffen- Präzisionsausführung Weitere bmessungen auf nfrage Twist drill HSS IN 338 N -fully ground-, short, precision Other dimensions upon demand rt.-nr. 303 001 020
MehrPräzisions-Gewindewerkzeugfabrik TAPPING FOR EXPERTS. Gewindeschneidwerkzeuge. Threading Tools
Präzisions-Gewindewerkzeugfabrik TAPPING FOR EXPERTS TOTAL-Programm Gewindeschneidwerkzeuge Threading Tools Preisliste 2009 / Price List 2009 TAPPING FOR EXPERTS Gewindeschneidwerkzeuge Threading Tools
MehrVHM-Bohrer. Solid carbide drills. Unsere Präzision ist die Basis Ihrer Qualität. Solid carbide drills. VHM Bohren
VHM-Bohrer VHM Bohren Unsere Präzision ist die Basis Ihrer Qualität 89 VHM-Spiralbohrer - extra kurz, DIN 6539 Solid carbide drill - extra short Art.-Nr. 303... 90 d1 d2 Schaftdurchmesser = Schneidendurchmesser
MehrHartmetall-Wendeschneidplatten für Wirbelköpfe. Eingängige Gewinde One start
GEWINDEWIRBELN THREAD WHIRLING Gewindewirbeln auf Langdrehmaschinen Thread whirling for Swiss type machines Hartmetall-Wendeschneidplatten für Wirbelköpfe Indexable carbide inserts for Whirling Heads Zweigängige
MehrEinrohr-Verstelleinheiten auf Rund- oder Vierkantrohrbasis Single tube linear units with round or square tubes
auf Rund- oder Vierkantrohrbasis with round or square tubes Übersicht / Overview Rechts- oder Linksgewinde Right- or left-hand thread siehe Seite 105 / see page 105 Geteilte Gewindespindel Separated spindle
MehrDie MK-Tools-Service GmbH wurde 2001 von Helmut Miller und
2013/2014 Die MK-Tools-Service GmbH wurde 2001 von Helmut Miller und Stephan Kinateder als Nachschärfbetrieb für Vollhartmetall- Werkzeuge gegründet. Durch konsequenten Einsatz neuster Technologie konnten
MehrHochleistungs-Spiralbohrer mit Innenkühlung und TiAlN Futura TOP Beschichtung zum Bohren bis zu 20xd und 30xd ohne Entspanen.
RECORD TECHNISCHE DATEN / TECHNICAL DATA Baumaße/Dimensions: Ref. 034TT ILIX Norm (20xd) Ref. 03TT ILIX Norm (30xd) Schaftausführung/Shank: DIN 535 HA (Ref. 034TT/03TT) Schneidstoff/Cutting material: VHM
MehrWAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application
WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application Qualitätswerkzeuge WAB Powercut-Kernbohrsystem Das WAB Powercut-Kernbohrsystem hat im Vergleich mit dem Bohren mit
MehrImproving Quality Through Innovation
UK D Stainless steel drills / Für Edelstahlbearbeitung Internal coolant / Innenkühlung TiAlN-based coated / TiAlN-basierte Schicht Improving Quality Through Innovation Product of Holland Premium Line Solid
MehrK-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn
K-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn Vollhartmetallfräser für universellen Einsatz, wie Nutenfräsen, Seitenfräsen
MehrSnap-in switch for switches PSE, MSM and MCS 30
Product manual Snap-in switch for switches PSE, MSM and MCS 30 CONTENTS 1. PRODUCT DESCRIPTION 2. DATA AND DIMENSIONAL DRAWINGS 2.1. Technical Data 2.2. Dimensions of PSE with a Mounting Diameter 19 mm
MehrK210. Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!!
K2 Catalogue / 11 Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!! Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!!
MehrBLICKLE BOHRER: EINFACH SPITZE, DOPPELT GUT.
BLICKLE BOHRER: EINFACH SPITZE, DOPPELT GUT. . A 81 Firmenportrait Jahrzehntelange Erfahrung, hohe Qualität und das besondere Bemu hen, unsere Kunden mehr als zufriedenzustellen das zeichnet BLICKLE als
MehrGewindewirbeln auf Langdrehmaschinen
GEWINDEWIRBELN THREAD WHIRLING Gewindewirbeln auf Langdrehmaschinen Thread whirling for Swiss type machines Hartmetall-Wendeschneidplatten für Wirbelköpfe Indexable carbide inserts for Whirling Heads Zweigängige
MehrDREAM DRILLS -MQL TYPE CARBIDE DREAM DRILLS - MQL TYPE. Being the best through innovation - WITH COOLANT HOLES
Being the best through innovation - MQL TYPE - WITH COOLAT HOLE Minimum Quantity Lubrication. ing Deep Holes, D ~ 30 D - Mit Kühlkanälen Minimalmengenschmierung. Tiefloch D, 1 D, 20 D, 2 D und 30 D ELECTIO
MehrPUNKTANBOHRER centering-pointer. HOCHLEISTUNGS-ANFASBOHRER chamfering drill
DRP DRA spinin PUNKTANBOHRER centering-pointer Code ØD0 L0 a ØQ r min -1 f mm r -1 f mm min -1 DRP 338 090 -B -C 3 38 90 DRP 338 120 -B -C 3 38 120 DRP 338 140 -B -C 3 38 140 0,04 0,04 0,04 7000-14000
MehrSenker / Countersinks, Counterbores
/ Countersinks, Counterbores / Countersinks, Counterbores Flachsenker / Counterbores Kegelsenker / Countersinks Blechschälbohrer / Conical Sheet Drills Stufenbohrer / Multi Step Drills Aufbohrer / Core
MehrFlexTurn Multifunktionswerkzeug / Multi-function tool. 1.5xD / 2.25xD
FlexTurn Multifunktionswerkzeug / Multi-function tool 1.5xD / 2.25xD FlexTurn Multifunktionswerkzeug FlexTurn Multi-function tool iiinnovation ppprecision ppperformance FlexTurn by GOLDBERG Das Multifunktionswerkzeug
MehrLukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen
Technical Report No. 028-71 30 95685-350 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
MehrT-NUTEN-FRÄSEN MILLING OF T-SLOTS. Hervorragende Spanausbringung durch späneausflutende, zentrale Kühlmittelzufuhr.
T-NUTEN-RÄSEN MILLING O T-SLOTS Hervorragende Spanausbringung durch späneausflutende, zentrale Kühlmittelzufuhr. Excellent removal of chips, flushed by through coolant supply. 1 T-NUTEN-RÄSEN MILLING O
MehrPRÄZISION. Katalog Catalogue
PRÄZISION Katalog Catalogue Präzisionswerkzeuge in Vollhartmetall, Diamant und Cermets zum Bohren Senken Reiben Precision tools in solid carbide, diamond and cermets for drilling countersinking reaming
MehrBohrwerkzeuge Drills
Bohrwerkzeuge Drills Inhaltsverzeichnis Index Werkzeug Gruppe 3: Bohrwerkzeuge Tools Group 3: Drills Id. Nr. Code Seite Page Einführung Introduction 230 237 Werkzeug Gruppe 1: Tools Group 1: Id. Nr. Code
Mehr-Special. HDS -Fräser. -Endmills. Increase in productivity at low tool cost thanks to newly developed tool material HARDAL SUPRA
-Special SP102-1/2016-DE/GB HDS -Fräser -Endmills Die leistungsstarke Alternative zu konventionellen HSS- und VHM-Fräsern. The powerful alternative compared with conventional H.S.S.-and carbide endmills.
Mehrmax. Flügelgewicht: 140 kg max. Flügelgewicht: 200 kg max. Flügelbreite: mm max. Flügelbreite: mm
JUMBO Allgemeine und technische Hinweise: JUMBO - Universalbeschläge haben ihren besonderen Einsatzbereich bei stärkeren Glasdicken und großen Flügelabmessungen gefunden. Dieser Beschlag ist geeignet für
MehrPRÄZISION Precision Tools in Solid Carbide High Performance Drills - Program Choices for your Production Präzisionswerkzeuge in Vollhartmetall - Hochleistungsbohrer Auswahlprogra für Ihre Fertigung HAM
Mehr-Special. HDS -Fräser. -Endmills. Increase in productivity at low tool costs thanks to newly developed tool material HARDAL SUPRA SP102-1/2018-DE/GB
-Special SP102-1/2018-DE/GB HDS -Fräser -Endmills Die leistungsstarke Alternative zu konventionellen HSS- und VHM-Fräsern. The powerful alternative compared with conventional HSS-and carbide endmills.
MehrVorstoß in neue Tiefen
Presseinformation August 2011 / 1. von 3 Seiten Werbung und PR Telefon (0 61 72) 1 06-461 Telefax (0 61 72) 1 06-213 E-Mail s.dillmann@wexo.com Vorstoß in neue Tiefen Neue Tieflochbohrer von WEXO bis 50xd
MehrVHM BOHRER Solid Carbide DRILLS
VHM BOHRER Solid Carbide DRILLS Made in GERMANY TOP QUALITY AND TOP PRICES Unlimited innovations 2010 VHM-Spiralbohrer - extra kurz, DIN 6539 Solid carbide drill - extra short Art.-Nr. 303... without 2
MehrAlu-POWER FRÄSER für ALUMINIUM
Alu-POWE END S for Alu-POWE FÄSE für ALUMINIUM Alu-POWE END S SELECTION GUIDE EI92 CABIDE, 2, HELIX for, DIAMOND COATED VHM, 2 SCHNEIDEN, ECHTSSPIALE für ALUMINIUM, DIAMANT-BESCHICHTETE 1 EG9 CABIDE, 2,
MehrAusf. Type 1 Ausf. Type 2 Ausf. Type 3 Ausf. Type 4 Ausf. Type 5 Ausf. Type 6. Ausf. Type 7 Ausf. Type 8 Ausf. Type 9 Ausf. Type 10 Ausf.
en der optibelt KS Keilrillenscheiben Auswuchten, Aufschläge für Fertigbohrungen s of optibelt KS V-grooved pulleys balancing, surcharges for finished bores Ausf. 1 Ausf. 2 Ausf. 3 Ausf. 4 Ausf. 5 Ausf.
MehrImproving Quality Through Innovation. Short and long drills / Kurze und lange Spiralbohrer NC Spot drills / NC - Anbohrer Uncoated / Unbeschichtet
UK D Short and long drills / Kurze und lange Spiralbohrer NC Spot drills / NC - Anbohrer Uncoated / Unbeschichtet Improving Quality Through Innovation Product of Holland Flex Line Solid Carbide Drills
MehrAUMENTO 15% KEGELSENKER COUNTERSINKS (0) KARNASCH PROFESSIONAL TOOLS INDUSTRIAL TOOLS DIVISION
WWW.KARNASCH.TOOLS KEGELSENKER 0 0 0 COUNTERSINKS 0 0 0 GERMAN QUALITY PRODUCT KONTAKT CONTACT KARNASCH PROFESSIONAL TOOLS INDUSTRIAL TOOLS DIVISION JETT FÜR SIE ONLINE! NOW ONLINE FOR YOU! ONLINE Straße
Mehr19 Network Cabinet Modular, Unequipped Frame for modular upgrading or use as open rack
19 Network Cabinet Modular, Unequipped Frame for modular upgrading or use as open rack page 1 of 6 Art.-No. 692515U.. 692447U unequipped basic frame for modular upgrading depth-adjustable 19 profiles with
MehrGEWINDEWIRBLER (VERSTÄRKT, KURZ/LANG) thread whirler (reinforced, short/long)
WHA WHB GEWINDEWIRBLER (VERSTÄRKT, KURZ/LANG) thread whirler (reinforced, short/long) Code ØD0 L0 M P ØD1 ØD2 A L1 WHA 338 010 025 -B -C 3 38 1,0 0,25 0,83 0,41 0,03 2,3 WHA 338 012 025 -B -C 3 38 1,2
Mehri-hs mill FRÄSER CARBIDE INSERT & HOLDER Being the best through innovation - For machining General Steels and Cast Iron, Ductile Cast Iron
CARBIDE INSERT & HOLDER Being the best through innovation FRÄSER - For machining General Steels and Cast Iron, Ductile Cast Iron - Zur Bearbeitung von Stahl und Gusseisen, Sphäroguss SELECTION GUIDE SIZE
MehrV7 Mill STEEL V7 FRÄSER CARBIDE. - Steels in Heavy and Silent Cutting Materials up to HRc40. Designed as Unequal Leads.
Being the best through innovation V7 FÄSE in Heavy and Silent Cutting Materials up to Hc40. Designed as Unequal Leads. Für Stähle in schwerem und ruhigem Schnitt bis zu Hc40. Ungleiche Teilung SELECTION
MehrNetwork premium POP UP Display
Premium Pop Up System seamless graphic precision very compact and versatile pop-up system quick to set up at any location comes in a number of different shapes; straight, curved, wave-shaped, stair formations,
Mehr-Special. Produktivitätssteigerung bei niedrigen Werkzeugkosten. Increase in productivity at low tool costs thanks to newly developed tool material
-Special SP102/2017-DE/GB-WV HDS -Fräser -Endmills Die leistungsstarke Alternative zu konventionellen HSS- und VHM-Fräsern. The powerful alternative compared with conventional HSS-and carbide endmills.
Mehr382/383 HOCHLEISTUNGS-SCHEIBENFRÄSER HIGH PERFORMANCE DISC MILLING CUTTER
HOCHLEISTUNGS-SCHEIBENRÄSER HIGH PERORMANCE DISC MILLING CUTTER 382/383 Scheibenfräser Universelle Schneidengeometrie für Stahl und Leichtmetall 10 positiver Spanwinkel Gute Spanausbringung Hervorragende
MehrHEINRICH HACHENBACH Präzisionswerkzeuge. Bohren, Senken, Reiben, Gewinden. Ausgabe 14/1
HEINRICH HACHENBACH Präzisionswerkzeuge Bohren, Senken, Reiben, Gewinden Ausgabe 14/1 HEINRICH HACHENBACH 3 Werkzeugkatalog Tool catalogue gültig ab 1. August 2012 valid from 1 august 2012 Alle Preise
MehrPRÄZISION. HAM Superdrill Drills for Highest Demands Vollhartmetall-Hochleistungsbohrer für höchste Ansprüche
PRÄZISION Precision Tools in Solid Carbide High Performance Drills - Program Choices for your Production Präzisionswerkzeuge in Vollhartmetall - Hochleistungsbohrer Auswahlprogra für Ihre Fertigung HAM
MehrZahnstangen geschliffen, gerade & schräg Racks Ground, Straight & Helical Seiten pages B 3 - B 6
Zahnstangen Racks Lagerprogramm Stock Programme Inhalt Content Zahnstangen geschliffen, gerade & schräg, Verzahnungsqualität 5 - NEU Racks Ground, Straight & Helical, Toothing Quality 5 - NEW Seiten pages
MehrReibahlen - Aufbohrer Reamers - Core drills
Reibahlen - Aufbohrer Reamers - Core drills Inhaltsverzeichnis Index Werkzeug Gruppe 4: Reibahlen - Aufbohrer Tools Group 4: Reamers - Core drills Id. Nr. Code Seite Page Einführung Introduction 269 275
MehrStandard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA
Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA Lagerprogramm Stock Programme Inhalt Kettenradscheiben und Kettenräder - en von 6 mm bis 50,8
MehrHDS -Fräser. -Special. -Endmills. Increase in productivity at low tool cost thanks to newly developed tool material HARDAL SUPRA
-Special SP102/2015-DE/GB/WV HDS -Fräser -Endmills Die leistungsstarke Alternative zu konventionellen HSS- und VHM-Fräsern. The powerful alternative compared with conventional H.S.S.-and carbide endmills.
MehrArcelorMittal Distribution. Structural hollow sections Square and rectangular hollow sections
ArcelorMittal Distribution Structural hollow sections Square and rectangular hollow sections Structural hollow sections 10/2008 Welded square hollow sections (inc. structural sections) acc. to EN 10305-5
MehrStandard programme drilling. The tool specialists for the trade.
Standard programme drilling The tool specialists for the trade. The tool specialists for the trade. Miller GmbH, Präzisionswerkzeuge in Altenstadt is a member of the "tooltraders-partner" association and
MehrNUTFRÄSEN (Zirkular) GROOVE MILLING (by circular interpolation) Kombifräser M275 mit M313 und Anbindung HSK
Kombifräser M275 mit M313 und Anbindung HSK Beispiel Pleuel Haltenutfräsen Arbeitsablauf Nutfräsen und Fasen Combined Milling Head M275 with M313 and coupling HSK xample Connection rod Milling of locating
MehrCentroGrip CentroGrip
CentroGrip CentroGrip CentroGrip Die CentroGrip -Baureihe vereint bestmöglichen Rundlauf mit maximaler Flexibilität. So können innerhalb einer ufnahme bis zu 12 verschiedene Durchmesser in der jeweiligen
MehrP V W/set N / 20 % 2460 B66311-G-X130 N / 20 % < 0,27
Core B663 In accordance with IEC 6246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A =,44 mm l e = 46,3 mm A e = 32, mm 2 A min = 3,9 mm 2 V e = 490 mm 3 Approx. weight 7,3
MehrSYSTEM Guide Rail 2017
ProductInfo SYSTEM Guide Rail 2017 ProductNews 25.11.2009 SYSTEM Indoor SYSTEM 25x25 SYSTEM 19x27 SYSTEM Outdoor SYSTEM 56x58 SYSTEM 40x40 High Tech Blind Components Industriestrasse 12-14 AT 2201 Gerasdorf/Wien
MehrApplications. General technical specifications according to ISO Parallelism mm: 5/1x0,10 L3x0,008
UV IR Cut Filter Schneider-Kreuznach UV IR Cut filter transmit VIS light and block troublesome UV and IR light. Those popular filters are ideal as sensor cover glasses. The choice of wavelength ranges
Mehrs 120; s 311; s 312; s 330; s 510; s 511; s 530; s 700
Technical Report No. 028-7130 95685-250 of 02.12.2016 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
Mehri-hs mill FRÄSER CARBIDE INSERT & HOLDER Being the best through innovation - For machining General Steels and Cast Iron, Ductile Cast Iron
INSERT & HOLDER Being the best through innovation FRÄSER - For machining General Steels and Cast Iron, Ductile Cast Iron - Zur Bearbeitung von Stahl und Gusseisen, Sphäroguss SELECTION GUIDE SIZE ITEM
MehrENTS ENTS ASSORTM ASSORTM ASSORTMENTS
A S S O RT M E N TS The product category assortment contains tool sets, tool packaging and assortments for the Do it yourself section. The tool sets split up into groups for processing inner threads and
MehrMaße Dimensions [mm] unbeschichtet uncoated. DK 1110 l Ø d s Ø d 1. Passende Trägerwerkzeuge / Suitable Toolholders Trägerwerkzeuge Toolholders
Inhaltsverzeichnis Contents Short Hole Drills Seite Page Drehwerkzeuge Short Hole Drills BSP BSP 8.02 Ø 13-22 mm, 3 x D, 4 x D Short Hole Drills BNP BNP 8.03 Ø 23-60 mm, 3 x D, 4 x D Wendeschneidplatten
MehrZehnder ComfoWell 320
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with locking slides for
MehrDILO soldering unions
DILO soldering unions are particularly used in factory fabrication area piping. DILO offers a very wide variety of unions. Soldering unions are available either with soldering connections on both ends
MehrStainless steel long products
St ai nl es ss t eell ongpr oduc t Bright bars, flat bars and cold formed sections complete the product range of Marcegaglia stainless steel long products for applications including precision engineering,
MehrSystem DS zum Hartfräsen. System DS for hard milling. Solid carbide endmills for machining hardened steels from 50-70 HRC
EINSTECHEN ABSTECHEN NUTFRÄSEN NUTSTOSSEN KOPIERFRÄSEN BOHREN REIBEN NEU System DS zum Hartfräsen VHM-Fräserreihe zur Bearbeitung gehärteter Stähle von 50-70 HRC NEW System DS for hard milling Solid carbide
Mehr- Cubic Boron Nitride, Machining High Hardened Steels up to HRc70, Mirror Finish
Being the best through innovation (Cubic Boron Nitride) FÄSE - Cubic Boron Nitride, Machining High Hardened up to Hc70, Mirror Finish - Kubisches Bornitrid, Zum Fräsen hoch gehärteter Stähle bis Hc70.
Mehr2015/2016. Neues Programm New program. Innengewindeformer Forming taps
2015/2016 Neues Programm New program 1 Technische Informationen Technical information Eine neue Geometrie, in Verbindung mit einer speziell oberfl ächenbehandelten -Beschichtung, zeichnen diese aus. Hierdurch
MehrWalter Buchmayr Ges.m.b.H.
Seite 1/10 Chapter Description Page 1 Advantages 3 2 Performance description 4 3 Settings 5 4 Options 6 5 Technical data 7 6 Pictures 8 http://members.aon.at/buchmayrgmbh e-mail: walter.buchmayr.gmbh@aon.at
MehrMachine Brochure. MÜLLER WEINGARTEN Blanking line. https://youtu.be/1_gz2wxmmo
Machine Brochure MÜLLER WEINGARTEN Blanking line https://youtu.be/1_gz2wxmmo0 7-40263 Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße 2 74172 Neckarsulm GERMANY +49 (0) 7132 99936 0 www.goedicke.com
MehrLukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. edraulic rescue equipment
Technical Report No. 028-7130 95685-050 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
MehrBrand Label. Daimler Brand & Design Navigator
Daimler Brand & Design Navigator 30. März 2016 Brand Label FUSO Financial uses the FUSO letters in combination with the word Financial in the font Daimler CS for name and label. Black lettering is set
MehrHOCHLEISTUNGS-SCHEIBENFRÄSER HIGH PERFORMANCE DISC MILLING CUTTER. SCHEIBENFRÄSER Typ 382 / 383
HOCHLEISTUNGS-SCHEIBENFRÄSER HIGH PERFORMANCE ISC MILLING CUTTER SCHEIBENFRÄSER 382 / 383 Universelle Schneidengeometrie für Stahl und Leichtmetall 10 positiver Spanwinkel Gute Spanausbringung Hervorragende
MehrSchneidstoffleitfaden Cutting Grade Guide
Schneidstoffleitfaden Cutting Grade Guide SIMTEK Präzisionswerkzeuge GmbH Richard-Burkhardt-Strasse 11 DE-72116 Mössingen Deutschland/Germany Tel: +49 7473 9517-0 Fax: +49 7473 9517-77 Internet: http://www.simtek.de
MehrETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
MehrEnd Mills and Drills 2014/2015 Fräser und Bohrer 2014/2015
UK D End Mills and Drills 2014/2015 Fräser und Bohrer 2014/2015 Improving Quality Through Innovation Product of Holland UK D End Mills and Drills 2014/2015 Fräser und Bohrer 2014/2015 Improving Quality
MehrDowel Pin aus Messing mit Retentionen (Kopf Ø: 2,0 mm) Zur Modellherstellung, und Fixation von Kunststoffstümpfen z.b. bei Konuskronen.
Dowel Pin mit Retentionen Dowel Pin with Retentions Dowel Pin aus Messing mit Retentionen (Kopf Ø: 2,0 mm) Zur Modellherstellung, und Fixation von Kunststoffstümpfen z.b. bei Konuskronen. Brass Dowel Pin
MehrBAGS GROUP I PRICE IN EUR/PCS TECHNICAL SPECIFICATION 1,47 1,05 1,86 1,31 1,51 1,09 0,90 0,88 1,06 0,79 0,81 0, , ,76 0,77 0,74
BAG/BOX Made-to-measure paper bags! The production of our bags is based on innovative solutions and high-quality materials. We pay a lot of attention to details. The majority of elements in our bags is
MehrGewindeschneidsortimente Thread Cutting Assortments
Gewindeschneidsortimente Thread Cutting Assortments M3 -E = Hochleistungsschnell-Stahl DIN 352 Für es ISO-Gewinde DIN 13, Toleranz 6H Anwendung Zum Schneiden von Gewinden. = High-speed-steel DIN 352 For
Mehr