CARBIDE. Being the best through innovation NC-SPOTTING DRILLS NC-ANBOHRER. - CENTERING and CHAMFERING. - Zentrier & Abfasen

Transkript

1 Being the best through innovation NC-ANBOHRER - ING and CHAMFERING - Zentrier & Abfasen

2 SELECTION GUIDE SOLID For General materials, Cast steels, Cast iron, Non-ferrous materials ITEM MODEL DESCRIPTION MIN SIZE MAX PAGE D5306 D5307, 90, 120 VOLLHARTMETALL NC-ANBOHRER 90, 120 D6.0 D D5320, 142 VOLLHARTMETALL NC-ANBOHRER 142 D3.0 D RECOMMENDED CUTTING CONDITIONS EMPFOHLENE SCHNEIDKONDITIONEN phone: , fax: , yg1@yg1.kr

3 SOLID Carbon Alloy Prehardened Hardened ~HB225 HB225~325 HRc30~45 HRc45~55 HRc55~ Cast Iron Aluminum Stainless Titanium Mild : Excellent : Good Copper Bronze CFRP phone: , fax: , yg1@yg1.kr 123

4 HSS i- -GENERAL -INOX -ALU -CFRP -MQL TYPE for HARDENED GENERAL MULTI-1 HPD, VOLLHARTMETALL NC-ANBOHRER Application : For more precise centering work on NC/CNC Machines. The large diameter of the tool permits chamfering work after centering continuously P.126 Verwendung NC-Spotting drills 90 NC-Spotting drills 120 NC-Anbohrer 90 NC-Anbohrer 120 EDP No. D D D D D D Drill Diameter Flute Overall EDP No. D53060 D53080 D D D D TiN(D6306, D6307), TiCN(DG306, DG307) and TiAlN(DH306, DH307) are available on your request. D5306 SERIES D5307 SERIES : Auf NC-Maschinen, Lehrenbohrwerken u.a. kapitalintensiven Bohrwerken, zum Zentrieren und Anfasen von Gewindebohrungen in einem Arbeitsgang. Besonders geeignet zum Anbohren von hochfesten Stählen, Stahlguß, Grauguß, Hartguß, Mangan-Hartstahl, CrNi-Stählen, Bronze, Leicht-und Buntmetallen. Drill Diameter Flute Unit : mm Overall GOLD-P STRAIGHT TAPER SPADE TECHNICAL DATA Carbon ~HB225 Alloy HB225~325 Prehardened HRc30~45 Hardened HRc45~55 HRc55~ Cast Iron Aluminum Stainless Titanium Mild 1 phone: , fax: , yg1@yg1.kr : Excellent : Good Copper Bronze CFRP

5 , VOLLHARTMETALL NC-ANBOHRER Application : For more precise centering work on NC/CNC Machines. The large diameter of the tool permits chamfering work after centering continuously. 142 NC-Spotting drills 142 NC-Anbohrer 142 Drill EDP No. Diameter D D D53200 D D D D D D P.126 Flute Unit : mm Overall Verwendung D5320 SERIES : Auf NC-Maschinen, Lehrenbohrwerken u.a. kapitalintensiven Bohrwerken, zum Zentrieren und Anfasen von Gewindebohrungen in einem Arbeitsgang. Besonders geeignet zum Anbohren von hochfesten Stählen, Stahlguß, Grauguß, Hartguß, Mangan-Hartstahl, CrNi-Stählen, Bronze, Leicht-und Buntmetallen. HSS i- -GENERAL -INOX -ALU -CFRP -MQL TYPE for HARDENED GENERAL MULTI-1 HPD GOLD-P STRAIGHT TAPER Carbon ~HB225 Alloy HB225~325 Prehardened HRc30~45 Hardened HRc45~55 HRc55~ Cast Iron Aluminum Stainless Titanium Mild : Excellent : Good Copper Bronze CFRP SPADE TECHNICAL DATA phone: , fax: , yg1@yg1.kr 125

6 HSS i- -GENERAL -INOX -ALU -CFRP -MQL TYPE for HARDENED GENERAL RECOMMENDED CUTTING CONDITIONS EMPFOHLENE SCHNEIDKONDITIONEN NC - SPOTTING 90, 120, 142 with FLATTED VOLLHARTMETALL NC-ANBOHRER 90, 120, 142 mit MITNAHME FLÄCHE D5306, D5307, D5320 SERIES WORK MATERIAL NON-ALLOY ALLOY SOFT GREY CAST IRON HARD GREY CAST IRON STAINLESS Al-Si ALLOYS, Si<10% Al-Si ALLOYS, Si>10% Ti, Ni ALLOY STRENGTH < 0 N/mm 2 < 1000 N/mm 2 < HB0, GG25 < HB300, GG40 DRILLING SPEED 65 ~ 75 m/min 45 ~ 55 m/min 90 ~ 100 m/min 65 ~ 75 m/min 35 ~ 40 m/min 145 ~ 165 m/min 115 ~ 5 m/min 35 ~ 40 m/min DIAMETER N S N S N S N S N S N S N S N S N = R.P.M S = Feed per Revolution (mm/rev.) MULTI-1 HPD GOLD-P STRAIGHT TAPER SPADE TECHNICAL DATA 126 phone: , fax: , yg1@yg1.kr