2 Contents (A) PRECAUTION!!! (B) Packaging Contents (C) Product Descriptions (D) Conditional Access (E) Remote Control (F) Main Features (G) Technical Data I. Installation of the Receiver 1. Connecting satellite cables 2. Connecting the TV (and VCR) 3. Connecting Power 4. Power ON/OFF II. First Time Installation (using Wizard) Step1. Video Input Selection Step2. Video Mode Selection Step3. Language Selection Step4. Configuring Satellite Connection Step5. Check The Internet Connection Step6. Configuring Tuner A III. Basic Operations 1. Switching Channel 2. Volume Control 3. Selecting Audio Track 4. Subtitle 5. Teletext 6. Program Information (Infobar) 7. Channel List (Channel Selection Menu) 8. Electronic program Guide (Event View) 9. Timeshift 10. Media Player 11. Plug-ins 12. Sleep Timer
3 IV. System Configuration 1. Main menu 2. System Setup 2-1. System Configuration A. A/V Setting B. Customization C. Language Selection D. Time Zone E. Hard Disk Set Up F. Network Setup G. Display Setup H. Skin (Change) 2-2. Service Searching A. Tuner Configuration B. Automatic Scan of Services C. Manual Scan of Services D. Fast Scan E. Positioner Setup F. Satfinder 2-3. Checking CAM 2-4. Parental Control 2-5. Factory Reset 2-6. Soft Update A. Service Information B. System Information 2-7. Transcoding 2-8. Inserting Tuner Functional requirements for SRC VI. Copyright GNU GPL VII. Menu Structure VIII. Troubleshooting IX. Glossary GERMAN Manual 75
4 (A) PRECAUTION!!! The receiver has been designed and manufactured in compliance with EU consumer safety requirement (CE). Please read the following safety precautions carefully. 1. Connecting Power This product operate only in the range of AC 100V ~240V and 50Hz/60Hz. Please check first your power supply to see if it fits this range. Please be noted that you need to disconnect from the mains before you start any maintenance or installation procedures. Make sure that the power cord is placed in a position where it is easy to unplug it from the mains in an emergency. 2. Overloading Do not overload a wall outlet, extension cord or adapter as this may cause electrical fire or shock. 3. Liquid This product is not water-proof and should not be exposed to dripping, splashing, or any type of liquid. No objects filled with liquid such as base shall be placed on the product. Please do not clean the product with wet cloth, which may cause a short circuit. No wet objects should be placed near the product. 4. Ventilation Allow a sufficient space between the product and other objects to make sure air ventilation of the product. Do not block the top or rear of the product with an object, which will close the ventilation holes and lead to a high temperature of the system. This may cause a failure of the product. Do not stack other electronic devices on top of the product. Do not insert any kind of pointed objects like screw, gimlet, etc. into the ventilation holes of the product. 5. Connecting the Satellite Cable Disconnect the power of the product before you connect the satellite cable to the product. Otherwise, it may cause 6. Grounding The LNB must be earthed to the system earth for the satellite dish. 7. Location Place the product indoor. Do not expose the product to rain, sun or lightening. Do not place the product near any heat appliances as a radiator. Ensure that there is more than 10cm distance from any electrical devices and wall. 4
5 8. Lightening, Storm or Not In Use Unplug the product and disconnect the antenna cable during a thunderstorm or lightning, especially when left unattended and unused for a long period of time. This will prevent possible damages from power surges or lightening. 9. Replacement of Parts Unauthorized part replacements, especially by one who is not a qualified technician may result in damage to the product. Ensure that when part replacements are necessary qualified technicians perform the task using the components specified by the manufacturer. 10. Hard Disk Drive ( In case of using external USB HDD) Do not move the product or turn the power off suddenly while the Hard Disk Drive (HDD) is still running. The company shall not be liable for any corruption of data on the HDD caused by careless use or misuse of users. 11. Battery There is danger of explosion if batteries are incorrectly replaced. Replace batteries only with the same or equivalent type. WEEE Symbol instructions. This product should not be disposed with other house hold wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will help prevent harm to the environment or human health form uncontrolled waste disposal. 5
6 (B) Packaging Contents Quad Box Quad Box HD 2400 Please check all package contents before using your product. Receiver Remote Control HDMI Cable (Optional) User Manual Adaptor Power Code Loop Cable 6
7 (C) Product Descriptions Front Panel F3 F6 Quad Box F2 F1 F4 F5 F1: OLED Display Displays the current channel or certain programming function when using the menus. 256 x 64 pixels (Blue) F2: Button (Power On/Off) F3: Buttons (CH /, Vol -/+) F4: USB Host Connects the USB memory stick or external HDD. F5: CI Module Slot Two CI module slots are provide. F6: Smartcard Reader Slot Two Smartcard slots are provide. 7
8 Rear Panel R1 R11 R2 R4 R10 R8 R13 LNB IN LNB IN Loop Out Loop Out 13/18V Max 400mA 22KHz 13/18V Max 400mA 22KHz TUNER A TUNER B TUNER C TUNER D 5V USB2.0X2 500mA Max R3 R5 R6 R7 R9 R12 R1: Two pluggable Tuner Slots Pluggable Type DVB-S2 and DVB C/T Hybrid Tuner available. Insert plug DVB-T/T2 Tuner. R2: SCART One SCART connector is provided for TV using SCART cable. R3: Video Output Connects to TV using RCA cable(composite YPbPr). R4: Component (YPbPr) Connects to TV using a component cable. R5: Audio output Connects to TV using RCA cable. R6: HDMI OUT Connects to TV using a HDMI cable for both audio and video signals. R7: HDMI IN Connects external devices to the receiver. R8: Ethernet Connects the PC or another set top box of the receiver. R9: USB Connects the USB memory stick or external HDD. R10: S/PDIF Connects to a digital audio system using S/PDIF cable. 8
9 R11: FAN R12: Power Inlet Connects the datachable power cord. R13: On/Off Switch Powers on/off. (D) Conditional Access Amongst the channels that are scanned via the receiver, some channel can be properly tuned on only with the corresponding Smartcard. The receiver provides one Smartcard Reader slot and users need to purchase those Smartcards that are required for viewing such subscription based services. Insertion of Smartcard 1 Open the door on the right side. 2 Insert Smartcard as in the following instruction. 3 Make sure that the Smartcard remains inserted while viewing. Quad Box 9
10 Insertion of CAM (Conditional Access Module) There ore several Conditional Access Systems(CAS), other than Xcrypt that the receiver supports. To be able to watch channels that are encrypted in such CAS as Nagravision, NDS, Irdeto, Viaccess, etc, users need to purchase a CAM that is corresponding to each CAS, as well as Smartcard to decrypt those encrypted channels. 1 Insert a Smartcard into the CAM as in the below picture. 2 Once the Smartcard inserted into the CAM, insert the CAM into the CI slot. 3 Make sure that the CAM remains inserted while viewing. Quad Box 10
11 (E) Remote Control. MUTE Silences the audio temporarily. NOTE: when Teletext is activated, mute key is also used when toggling between the Teletext page and the lice mode.. Power To switch receiver to ON or to STANDBY. Recording Displays instantly the recording menu.. Play/ Pause Plays the selected file (e.g. recording) at the normal speed. Pause the live program or recording play. TIMER. Timer Sets sleep timer.. Previous, Next. Stop Stops playing of a recording and goes to the live mode.. Fast Forward Fast Forward at up to 128 times faster than the normal speed (x2 / 4 / 8 / 16 / 32 / 64 / 128).. Fast Forward Pause the live program or recording play. SUBT. Subtitle Displays the subtitle of the current channel if the channel provides subtitle. VIDEO. Video Displays the video track option to choose. AUDIO. Audio Displays the audio track option to choose (e.g. ACS, Stereo). TTX. TTX Displays the teletext information of current channel, if the channel provides teletext data. FAV. FAV Listed channel. Back Returns to the previous screen. BACK PVR. PVR Records video in a digital format to HDD & USB storage device. 11
12 . Info To display current channel information. OK. OK Confirms the selected menu option.. Guide Displays the programme guide.. Navigation Keys Navigates up/down and left/right on the menu options. Up/down keys are used to call up the channel list. MENU. Menu Displays the main menu.. EXIT Exits the current menu option into the live mode, or switches one step back of the menu. EXIT INFO GUIDE TV. TV Displays the TV Channel list. RADIO. Radio Displays the Radio channel list. VOL+. Volume +/- Adjusts the audio volume. CH+ QZ_ 0. Number Keys Enter a channel number or numbers required to be input according to menu options. VOL- CH-. Channel +/- Navigates through the scanned channel list CONTEXT USER. Context, User *Option : Xbmc F1 F2 F3. F1, F2, F3 Assign a key function of your own. (Air mouse & Vioce optional) < >. Navigation Keys Navigates left/right on the menu options.. Color Keys Each key is assigned a specific function that may be different in each menu. Red Green Yellow Blue NOTE : QWERTY is also supported. (optional) 12
13 (F) Main Features Powerful Dual Thread CPU 1.3GHz 2 x Smartcard Readers 2 x Common Interface Dual MPEG2 / H.264 Hardware Decoding 4 x Pluggable Tuner 2 x DVB-S2 Tuner (Pre-installed) OLED Display - 256x64 Pixels (Blue) 4MByte SPI Flash/ 1GB NAND Flash/ 2GB RAM Gigabit Ethernet 3 x USB 2.0 SATA Ⅲ 2.5 HDD Support HDMI Composite Video / Component Video 1 x SCART SPDIF for digital bit stream out Power On/Off Switch Linux Operating System Media Player Downloadable Plug-ins support EPG support Automatic & Manual Service Scan support Multiple LNB control (DiSEqC) support Skin change support 13
14 (G) Technical Data Front Panel Rear Panel Power RF Video Decoding LNB General Display The receiver Technical Specifications 256x64 pixel OLED(Blue) smart card slot 2 Common Interface 2 USB2.0 1 Key Ch+/-, Vol+/-, Standby Power switch 1 Sat-IF input/output Connection TV Video output (analogue) Video/audio output(digital) Audio output (analogue) Audio output (digital) 2 x F-type (or DIN) Socket 1 x Scart socket 3 x Cinch socket(y/pb/pr) 1 x Cinch-socket(Video) 1 x HDMI 2 x Cinch socket Standard optical (SPDIF) USB Ethernet Mains voltage Power consumption (Max./typ. Operation/stand-by) RF range Modulation, FEC, de-multiplexer Video resolution Video decoding Input data rate S/N Decoding Sampling rate S/N LNB supply (vert./horiz.) 1 x Gigabit AC V / 50-60Hz 60 / 25 / 1W MHz DVB-S / DVB-S2 standard CCIR 601 (720 x 576 lines), 576p, 720p, 1080i MPEG-2, MPEG-4 compatible 2 45 MSymb/s > 53 db Dolby Digital, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2, 3 32 / 4.1 / 48 khz > 65 db 13 / 18V; Max. 400mA Control signal 22kHz; ToneBurst ; DiSEqCTM1.0 / 1.1 / 1.2 Dimensions(W x H x D) Weight 340 x 200 x 60 mm 1.9 kg 14
15 I. Installation of the receiver This chapter will guide you through the whole installation process of the receiver. Please read each section carefully to make sure that the system runs properly. 1. Connecting Satellite Cables The receiver is a Quad Tuner STB which allows you to connect up to 4 satellite, cable, and/or terrestrial connections. One of the first steps is to connect satellite cable(s) to STB in order to gain optimal signal quality. You can either choose one of the following connection methods depending on the equipment you have. A. Four Separate Satellite/Cable/Terrestrial Cables In case you have four separate satellite, cable, or terrestrial cables providing different broadcast signals, you can configure TUNER A Input and TUNER B-D Input independently. LNB IN LNB IN Loop Out Loop Out 13/18V Max 400mA 22KHz 13/18V Max 400mA 22KHz TUNER A TUNER B TUNER C TUNER D 5V USB2.0X2 500mA Max B. Internal Loop-through In case you have only one satellite cable, connect the cable to input of TUNER A. Then connect the loop-though cable from TUNER A output to TUNER B input. C. Combination of DVB-S/-S2/-C/-T/-T2 Connect a various combination of satellite, cable, and terrestrial connection to your TUNER A-D. 15
16 LNB IN Loop Out 13/18V Max 400mA 22KHz TUNER A LNB IN Loop Out 13/18V Max 400mA 22KHz TUNER B TUNER C TUNER D 5V USB2.0X2 500mA Max 2. Connecting the TV (and VCR) The receiver provides a variety of audio/video connection methods. A. Connecting TV via HDMI cable For the sake of the best picture quality, especially for digital TV, HDMI connection is recommended. Most HDTVs Have HDMI connectors to ensure the highest picture quality. In the rear panel of the receiver. one HDMI connector is available for this purpose. Connect your TV to the receiver. using a HDMI cable as follows. HDMI LNB IN LNB IN Loop Out Loop Out 13/18V Max 400mA 22KHz 13/18V Max 400mA 22KHz TUNER A TUNER B TUNER C TUNER D 5V USB2.0X2 500mA Max B. Connecting TV via Component Cable The secondly recommend TV connection for digital TV is vi component cable (YPbPr). However, unlike the HDMI connection which delivers audio and video signal at the same time, YPbPr connection requires additional audio connection either via RCA cable (Stereo L/R) or S/PDIF as follows. Y, Pb, Pr AUDIO S/PDIF Ceryon X4 NOTE: When you have an A/V receiver with S/PDIF digital audio input, this connection is recommended to enjoy the best audio quality, especially for the Digital sound. 16
17 C. Connecting TV via RCA (Video) Cable The receiver provides Composite video connection as well. Composite cable has normally three connectors at the both end; one video (Yellow) and Audio (White/Red). Connect your TV to the receiver using SCART cable as follows. VIDEO AUDIO LNB IN LNB IN Loop Out Loop Out 13/18V Max 400mA 22KHz 13/18V Max 400mA 22KHz TUNER A TUNER B TUNER C TUNER D 5V USB2.0X2 500mA Max D. Connecting TV via SCART cables In case your TV is analogue TV, SCART cable is the most common method. Connect to your receiver using SCART cable as follows. TV SCART LNB IN LNB IN Loop Out Loop Out 13/18V Max 400mA 22KHz 13/18V Max 400mA 22KHz TUNER A TUNER B TUNER C TUNER D 5V USB2.0X2 500mA Max 17
18 3. Connecting Power An A/C adapter and a power cord are provided as the basic accessories of the receiver. Connect the A/C adapter to DC IN at the rear panel of the receiver. Connect the power cord to the A/C adapter. Connect the power cord to a power outlet. Turn on the power switch at the rear panel. NOTE: AC input condition Nominal Voltage Range: VAC Maximum Voltage Range: VAC Nominal Frequency: 50 / 60 Hz Maximum Frequency: Hz NOTE: means Remote control operation order. 4. Power ON/OFF [ : Press Power key / Press Menu > Select Standby / Reset] There are several ways to turn your receiver ON or OFF Complete Power Shutdown There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or off each time. It takes a longer time to boot the system if you turned it off by this switch. Standby Mode POWER key is normally used to turn the power of the receiver on or off. If you press POWER, it instantly switches your receiver. Off or On in this mode, the system is not completely shutdown and thus it sakes a shorter time to turn it on and off. Deep Standby Mode [ : Menu > Standby/Restart > Deep Standby] Deep Standby is used to reduce standby power consumption. the receiver is designed to be energy efficient and to guarantee the power consumption to be under 1W in the deep standby mode. 18
19 II. First Time Installation (using Wizard) When you turn on the receiver for the first time after purchase, an installation wizard will begin step by step. NOTE: OK key is used for confirmation and turns to the next step. Press EXIT key to return to the precious page. This manual has been edited in reference to the standard SD skin. You can change it to the default HD skin. Step 1. Video Input Selection The receiver various I/O for video connection and here you can choose the main video connection port for your receiver. Use UP/DOWN key to scroll up and down to find the video connection port you want. Step 2. Video Mode Selection The receiver provides various modes for video and here you can choose the video mode for your receiver. Use UP/DOWN key to scroll up and down to find the video mode you want. 19
20 Step 3. Language Selection The receiver provides various languages and here you can choose the main language for your receiver. Use UP/DOWN key to scroll up and down to find the language you want. Step 4. Configuring Satellite Connection From now on you need to configure the satellite connection. You have two options: Use wizard to set up basic features Exit wizard You are strongly recommended to use wizard as it is designed to guide you through the configuration process. 20
21 Step 5. Check The Internet Connection Please connect your receiver to the internet and you can check internet connection. Use up/down key to scrol up and down to check the internet connection or skip it. Step 6. Configuring Tuner A Using LEFT/RIGHT key, you can choose one of the following Configuration Modes: Nothing connected Simple Loop through to: mode to make the LNB1 be internally connected to the LNB2 in. Equal to: mode to use the same configuration as that of Tuner B. Advanced: for an advanced user configuration. 21
22 If you choose Simple configuration mode, the following picture will appear. The five modes are available for the satellite cable connection between LNB and your receiver as below: Single This option is used to receive a single satellite with a single LNB. The cable from LNB is directly connected to the receiver. Toneburst A/B This option is used if you want to receive two satellites using a Toneburst switch. 22
23 DisEqC A/B This option allows you to configure two satellites in Port A and Port B. DisEqC A/B/C/D This option allows you to configure four satellites in Port A, Port B, Port C and Port D. Positioner This option is used when you have a motorized satellite antenna. 23
24 III. Basic Operations UP/DOWN key If you press UP or DOWN key, Channel Selection menu appears. You can move up and down to select the channel that you want to tune into. LEFT/RIGHT key If you Press LEFT or RIGHT key, the previous or subsequent channel of current channel is tuned in. CHANNEL +/- key If you press CHANNEL + or key, this will call up the Channel Selection menu. Channel Number Enter a channel number, and it will instantly tune into the channel. NOTE: if channel change is not done, it is probably because the selected channel is encrypted and you do not have a proper Smartcard. 1. Switching Channel CH+ [ : Press, CHANNEL key / Press to move to the next channels] CH- The receiver offers various channel zapping methods. You can switch the current channel by pressing 2. Volume Control VOL+ [ : Press VOLUME key] VOL- You can adjust the audio volume by pressing VOLUME +/- key. You can also mute or unmute the audio temporarily by pressing MUTE key. 24
25 3. Selecting Audio Track [ : Press AUDIO AUDIO key] You can check what audio tracks are available to choose by pressing AUDIO key. By using UP/DOWN key and Color key, you can select a different audio language or Stereo sound. NOTE: Available options on this menu will differ depending on the service. 4. Subtitle [ : Press SUBTITLE SUBT MENU key or Press MENU > Subtitle] You can view the subtitle of the current program if the program provides the subtitle. Press SUBTITLE key and Subtitle selection menu appears as below. Available subtitles, if any, will display. By using UP/DOWN navigate the list to select a subtitle that you want to play and press OK to activate it. 25
26 5. Teletext TTX [ : Press TELETEXT key] You can call up Teletext information by pressing TELETEXT key. It will take some time to load all the information. You can navigate through the Teletext page by using UP/DOWN key to select a text page. Also, just simply enter the page number that you want to read. 6. Program Information (Infobar) OK [ : Press OK key] Whenever you change the channel, infobar is always displayed for 5 seconds (default setting). Infobar is designed to provide you comprehensive information of the channel that you are currently watching. Press OK to call up infobar. 1 A: the tuner being used for the current channel. 2 SNR ( Signal to Noise Ratio) : Signal Level 3 AGC ( Automatic Gain Control) : Signal Strength 4 The name of the current channel 5 Remaining time of the current program 6 The current program 7 The next program 8 REC: Highlighted in red when recording is in progress. 9 CAS: Encrypted program 10 Teletext: Highlight when the program provides Teletext 11 16:9 : Screen ratio 26
27 12 RED: to activate recording 13 GREEN: to call up Subservices, if available 14 YELLOW: to activate Timeshift 15 Extensions: to call up a menu for Sleep Timer and Graphical Multi EPG 7. Channel List (Channel Selection Menu) CH+ [i: Press, CHANNEL key] CH- If press UP/DOWN key, this will activate Channel Selection Menu as below. Four types of the channel lists are available to help you manage your channel selection. RED displays the list of all scanned channels. GREEN displays the list of all satellites scanned. Per each satellite, channels are arranged according to Services, Provider, and New. Yellow displays the list of providers. 27
28 BLUE displays the list of your favorite channels. In order for you to add certain channels to this Favorites list 1 Call up the Channel Selection list by pressing UP or DOWN key. 2 Go to ALL list by pressing RED Key. 3 Select the channel that you want to add to the Favorites list. 4 Press MENU key on the selected channel and the following menu appears. 5 Choose add service to favorites and press OK. 6 Go to the Favorites list by pressing BLUE to confirm that the selected channel is correctly included in the list. 28
29 8. Electronic Program Guide (Event View) [ : Press GUIDE key] The Electronic Program Guide (EPG) displays the program information of each channel, if provided, in time and date order. You can view the detailed program information by pressing EPG key and the following menu, Event view appears. Detailed information of the current channel will be displayed on EPG. On this menu, three options are provided. RED (Similar) This option helps you find similar programs. If there are one or more programs that are similar to the current program, EPG Selection widow displays them as below. GREEN (Add Timer) If you press GREEN key, Timer entry menu appears as below. This option is used to set up a new timer for recording or zapping. - Name Displays the name of the selected program. - Description Displays a short description of the selected program,. - Timer Type Select Zap for channel tuning reservation. Select Record for recording reservation. - Repeat Type Select Once for one time of zapping or recording reservation. Select Repeated for repeated zapping or recording reservation. Repeats This option is given only when you selected Repeated in the Repeat Type. You can reserve zapping or recording per Daily / Weekly / Mon - Fri / User-defined. - Date Displays the current date. This entry is on when you selected Once, in the Repeat Type. - Start Time You can set the time to begin recording or zapping. - End Time You can set the time to end recording or zapping. - Channel This entry allows you to change the channel. Press LEFT/RIGHT key to call up channel Selection menu. You can select a different channel from this list using this option. To return to Timer entry menu, press EXIT. 29
30 YELLOW (single EPG) Press YELLOW while Event view menu is on, to call up the program event schedules of the selected channel. In this state, you can sort the list according to A - Z order or Time by pressing YELLOW. NOTE: To add a timer for recording or zapping, press GREEN. BLUE (Multi EPG) Press BLUE to activate EPG Selection Multi window. - You can move the previous or next program, within the same channel by using YELLOW (Previous)/ BLUE (Next). NOTE: Not all channels provide EPG information and thus in case of no EPG data, nothing will be displayed except for the channel name. - You can switch to another channel by using UP/DOWN key. - RED key is used to instantly tune into the selected channel. - GREEN key is used to reserve recording or zapping of the selected program. 30
31 9. Timeshift [ : Press Play or Pause key] For your information, Timeshift is an instant recording of the current program that you are watching. Press PLAY or PAUSE key, it will instantly pause the audio and video of the program, and a small window displaying elapsing time information will appear on the left upper side of the screen as below. Elapsing time information In this state, Timeshifted recording is running until you press either PLAY or PAUSE again. You can restart viewing of the program. If you want to stop Timeshifted recording and to return to the live mode, Press STOP key. You will be asked of Yes or No to stop Timeshft. NOTE: What is different from normal recording is that Timeshifted recording is not meant to be stored on HDD. If you stop Timeshift, you cannot replay the Timeshifted recording. 31
32 10. Media Player [ : MENU MENU > Media Player] The receiver is truly a multimedia receiver capable of playing media contents. Using Media Player, you can enjoy Music, Photo and Video contents store on the HDD and/or USB memory stick plugged into the receiver. If you play Media Player, the following player will appear. 1 Go into any directory of the HDD or plugged USB. 2 Select a file to play and press OK * Supported formats are mainly JPG, MP3, AVI, etc. 3 In the same way, you can play the recording files stored on the HDD. 32
33 11. Plug-ins [ : MENU MENU > plugins] The receiver is integrated with standard 10/100Mbps Ethernet with RJ45 connector. You are recommended to use this network capability of the receiver to fully enjoy the system. If receiver s network connection is established, you can directly download plug-ins from a designated website of the receiver. 1 Press MENU and select Plugins menu to active Plugin browser. 2 Press GREEN key to download a list of plug-ins available. 3 Once the download is done, a list of plug-ins will be displayed. 4 Select a plug-in to download. 5 You can check if the download is done properly on the Plugin browser. From this site, you can check available plug-ins to download as below. 33
34 12. Sleep Timer [ : MENU MENU > Standby/ Restart > Sleep Timer] You can set a specific time when your receiver goes into Standby mode or Deep Standby mode, using this menu. Three color keys are used to set up this sleep timer. 1 RED This option is used to enable or disable Sleep Timer. 2 GREEN This option is used to choose between Standby mode and Deep Standby mode. 3 YELLOW This option is used to choose whether to be asked of confirmation before system shutdown. 34
35 IV. System Configuration The receiver is a very sophisticated device designed to allow users a variety of system setting options as detailed as possible. You can fine-tune your receiver to be your OWN system to fit your taste. This chapter will guide you through the entire menu of system configuration. Prior to System Configuration, please take a notice on the menu structure of the receiver first. 1. Main Menu [ : Press MENU MENU ] The main menu of the receiver consists of the following sub menus. 1 Timer Activate Media Player of the receiver. For more information, please refer to Media Player section. 2 Information Has two sub menus for Service / About. Service menu provides the detailed information of the current channel. About menu provides the detailed information of the H/W and S/W system of your receiver. 3 Plugins Activates Plugin browser of the receiver. Using this browser, you can log onto the designated website and you can download a variety of new plus-ins. 4 Setup Provides all of the system settings. 5 Standby / Restart Provides options for power on/off and sleep timer. 35
36 2. System Setup [ : Press MENU MENU > Setup] The Setup menu consists of the following sub-menus. 1 System 2 Service Searching 3 Soft cam / CI 4 Parental Control 5 Factory reset 6 Software Update 2-1. System Configuration [ : Press MENU MENU > Setup > System] Here you can find most of the necessary setting that you might need to optimize your receiver in the way you like it. Please read the followings carefully. 36
37 A. A/V Settings [ : MENU MENU > Setup > System > A/V Settings] Here you will find options necessary to set up the audio and video configuration of your receiver. NOTE: RED is for cancel and GREEN is OK. OK key of RCU is not working in this mode. Amongst the parameters given in this menu, the following ones are generally what you need to decide for the audio and video. 1 Video output Here you need to decide which video output you want to use between your TV and receiver. The available options are as below. CVBS S-Video RGB 2 Mode You need to decide which resolution to use according to the video output above and your TV amongst the following options. Resolution Scart PAL NTSC Multi 37
38 B. Customization MENU [ : MENU > Setup > System > Customize] In this menu you will find various customization options and this menu can be displayed in three different formats: Simple, Intermediate, and Expert. NOTE: RED is for cancel and GREEN is OK> OK key of RCU is not working in this mode. Amongst the options given in this menu, the following ones are generally what you may need to know. 1 Recording always have priority YES option is used to set the recording to have a priority over any existing timer. If there occurs a conflict between a timer and a recording on progress, the recording has a priority over the timer. If you set this option at NO, you will be asked whether to switch to the service to record or not. 38
Patentrelevante Aspekte der GPLv2/LGPLv2 von RA Dr. Till Jaeger OSADL Seminar on Software Patents and Open Source Licensing, Berlin, 6./7. November 2008 Agenda 1. Regelungen der GPLv2 zu Patenten 2. Implizite
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
Index Introduction... 2 Change language of the User Interface... 3 Menubar... 4 Sold Software... 5 Explanations of the choices:... 5 Call of a licence:... 7 Last query step... 9 Call multiple licenses:...
Overview The Hamburg Süd VGM-Portal is an application which enables to submit VGM information directly to Hamburg Süd via our e-portal web page. You can choose to insert VGM information directly, or download
How-To-Do Hardware Configuration of the CC03 via SIMATIC Manager from Siemens Content Hardware Configuration of the CC03 via SIMATIC Manager from Siemens... 1 1 General... 2 1.1 Information... 2 1.2 Reference...
User Manual for Marketing Authorisation and Lifecycle Management of Medicines Inhalt: User Manual for Marketing Authorisation and Lifecycle Management of Medicines... 1 1. General information... 2 2. Login...
ALL1681 Wireless 802.11g Powerline Router Quick Installation Guide 1 SET ALL1681 Upon you receive your wireless Router, please check that the following contents are packaged: - Powerline Wireless Router
Filing system designer FileDirector Version 2.5 Novelties FileDirector offers an easy way to design the filing system in WinClient. The filing system provides an Explorer-like structure in WinClient. The
p^db=`oj===pìééçêíáåñçêã~íáçå= How to Disable User Account Control (UAC) in Windows Vista You are attempting to install or uninstall ACT! when Windows does not allow you access to needed files or folders.
Version: 00; Status: E Seite: 1/6 This document is drawn to show the functions of the project portal developed by Ingenics AG. To use the portal enter the following URL in your Browser: https://projectportal.ingenics.de
KURZANLEITUNG Firmware-Upgrade: Wie geht das eigentlich? Die Firmware ist eine Software, die auf der IP-Kamera installiert ist und alle Funktionen des Gerätes steuert. Nach dem Firmware-Update stehen Ihnen
How-To-Do Hardware Configuration of the CPU 317NET with external CPs on the SPEED Bus by SIMATIC Manager from Siemens Content Hardware Configuration of the CPU 317NET with external CPs on the SPEED Bus
Exercise (Part XI) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
NVR Mobile Viewer for iphone/ipad/ipod Touch Quick Installation Guide DN-16111 DN-16112 DN16113 2 DN-16111, DN-16112, DN-16113 for Mobile ios Quick Guide Table of Contents Download and Install the App...
Anleitung zur Schnellinstallation TFM-560X YO.13 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 6 Version 06.08.2011 1. Bevor Sie anfangen Packungsinhalt ŸTFM-560X
Exercise (Part II) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
Kurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen QuickStart Guide to read a transponder with a scemtec TT reader and software UniDemo Voraussetzung: - PC mit der
CABLE TESTER Manual DN-14003 Note: Please read and learn safety instructions before use or maintain the equipment This cable tester can t test any electrified product. 9V reduplicated battery is used in
Yealink W52 DECT IP Telefon Manuelle Neukonfiguration Dokumentenversion 1.0 Yealink W52 DECT IP Telefon Mauelle Neukonfiguration Copyright Hinweis Copyright 2016 finocom AG Alle Rechte vorbehalten. Jegliche
Release Notes BRICKware 7.5.4 Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0 Purpose This document describes new features, changes, and solved problems of BRICKware 7.5.4.
150Mbps Micro Wireless N USB Adapter TEW-648UBM ŸAnleitung zur Schnellinstallation (1) ŸTroubleshooting (6) 1.11 1. Bevor Sie anfangen Packungsinhalt ŸTEW-648UBM ŸCD-ROM (Dienstprogramm & Bedienungsanleitung)
Driver Installer and Uninstaller for TUSB3410 based devices Installation und Deinstallation des Treibers für Geräte auf Basis TUSB3410 Installation Manual 2014-11-28 Control Products and Systems Impressum
Wandbedieneinheit Wall Panel UWC 8801 / 8802 / 8803 Bedienungsanleitung User Manual BDA V130601DE UWC 8801 Wandbedieneinheit Anschluss Vor dem Anschluss ist der UMM 8800 unbedingt auszuschalten. Die Übertragung
Instruktionen Mozilla Thunderbird Seite 1 Instruktionen Mozilla Thunderbird Dieses Handbuch wird für Benutzer geschrieben, die bereits ein E-Mail-Konto zusammenbauen lassen im Mozilla Thunderbird und wird
Deutsch 1.0 Vorbereitung für das Firmwareupdate Vergewissern Sie sich, dass Sie den USB-Treiber für Ihr Gerät installiert haben. Diesen können Sie auf unserer Internetseite unter www.testo.de downloaden.
iid software tools QuickStartGuide iid software tools USB base driver installation microsensys Nov 2016 Introduction / Einleitung This document describes in short form installation of the microsensys USB
GAMING HEADSET LX6 PRO CHAT GAME Content Inhalt Lioncast LX6 Pro gaming headset Lioncast LX6 Pro Gaming Headset Inline remote kabelgebundene Fernbedienung MUTE - MIC - ON XBOX PS PS PC RCA splitter cable
ReadMe zur Installation der BRICKware for Windows, Version 6.1.2 Seiten 2-4 ReadMe on Installing BRICKware for Windows, Version 6.1.2 Pages 5/6 BRICKware for Windows ReadMe 1 1 BRICKware for Windows, Version
iid software tools QuickStartGuide iid software tools USB base RFID driver read installation write unit 13.56 MHz closed coupling RFID microsensys Jun 2013 Introduction / Einleitung This document describes
Anleitung zur Schnellinstallation TFM-561U V1 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 5 Version 08.25.2010 1. Bevor Sie anfangen Packungsinhalt TFM-561U Treiber
Benutzeranweisungen SmartClass Firmware-Update Vorgehensweise 2008.01 (V 1.x.x) Deutsch Please direct all enquiries to your local JDSU sales company. The addresses can be found at: www.jdsu.com/tm-contacts
2 General Information........................ 4 Purpose........................................4 Documentation................................4 Scope of Supply................................5 Technical
OEDIV SSL-VPN Portal Access for externals Abteilung Serverbetreuung Andre Landwehr Date 31.07.2013 Version 1.2 Seite 1 von 9 Versionshistorie Version Datum Autor Bemerkung 1.0 06.08.2011 A. Landwehr Initial
(GERMAN EDITION) BY TIM ROHR READ ONLINE AND DOWNLOAD EBOOK : CNC ZUR STEUERUNG VON WERKZEUGMASCHINEN (GERMAN EDITION) BY TIM ROHR PDF Click button to download this ebook READ ONLINE AND DOWNLOAD CNC ZUR
CA_MESSAGES_ORS_HDTV_IRD_GUIDELINE 1/8 ORS NOTICE This document is property of Österreichische Rundfunksender GmbH & Co. KG, hereafter ORS, and may not be reproduced, modified and/or diffused in any way
LevelOne WAB-5120 300Mbps Wireless Outdoor PoE Access Point/Bridge Quick Installation Guide English Deutsch - 1 - Table of Content English... - 3 - Deutsch... - 9 - This guide covers only the most common
Name: AP Deutsch Sommerpaket 2014 The AP German exam is designed to test your language proficiency your ability to use the German language to speak, listen, read and write. All the grammar concepts and
Quick Start Guide VN8810 Wireless Interface for CAN/LIN/K Line and DoIP Version 1.0 English / Deutsch ENGLISH Quick Start Guide VN8810 1 ENGLISH 1.1 Installation Please use the drivers from the included
English snom Wireless Headset Adapter snom Schnurlos-Headset-Adapter Deutsch User Manual Bedienungsanleitung 2007 snom technology AG All rights reserved. Version 1.00 www.snom.com English snom Wireless
Titelbild1 ANSYS Customer Portal LogIn 1 Neuanmeldung Neuanmeldung: Bitte Not yet a member anklicken Adressen-Check Adressdaten eintragen Customer No. ist hier bereits erforderlich HERE - Button Hier nochmal
Shibboleth Tutorial How to access licensed products from providers who are already operating productively in the SWITCHaai federation. General Information... 2 Shibboleth login... 2 Separate registration
K la vi er l ac ko p tik AKTIVE DVB-T ZIMMERANTENNE ANSCHLUSSHINWEISE ACTIVE DVB-T INDOOR ANTENNA CONNECTION INSTRUCTIONS ZA 8970 DRUCKS0682.indd 1 05.09.12 15:15 VerpAckunGsinhAlT UKW / UHF / VHF Flachantenne
User Manual BB-anywhere LOGIN PROCEDURE 1. Click the Start button, choose All Programs (right above the search box) and select BB-ANYWHERE from the Start menu: BB-anywhere in a nutshell Regardless whether
91126 911260 2SUPERVISOR S Level 2 German, 2015 91126 Demonstrate understanding of a variety of written and / or visual German text(s) on familiar matters 2.00 p.m. Friday 4 December 2015 Credits: Five
Betriebsanleitung RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät ä 2 Operating Instructions RS232 Connection, RXU10 Setting up an RS232 connection
XAIR-Bridge: Installationshinweise XAIR-Bridge: Short Installation Guide (English Version on Page 10) Bridge Ergänzung zu XAIR LOS GEHT S/GETTING STARTED Ziel und Zweck Diese Installationshinweise beschreiben
USB Treiber updaten unter Windows 7/Vista Hinweis: Für den Downloader ist momentan keine 64 Bit Version erhältlich. Der Downloader ist nur kompatibel mit 32 Bit Versionen von Windows 7/Vista. Für den Einsatz
LEBEN OHNE REUE: 52 IMPULSE, DIE UNS DARAN ERINNERN, WAS WIRKLICH WICHTIG IST (GERMAN EDITION) BY BRONNIE WARE DOWNLOAD EBOOK : LEBEN OHNE REUE: 52 IMPULSE, DIE UNS DARAN EDITION) BY BRONNIE WARE PDF Click
OMNITRONIC DSP Control Installationsanweisungen bis Version 1.3.1 Bitte befolgen Sie diese Schritt-für-Schritt Anleitung genau, nachdem Sie ein Software Update von unserer Website heruntergeladen haben.
Produktinformation 201105_147PNdeen Neue Software für die TOUCH PC Auswuchtmaschinen BM 35 Touch, BM 45 Touch, BM 55 Touch Mit der Einführung der BM 11 Touch in die Nussbaum Produktlinie der Rad Auswuchtmaschinen
v i r t u A L C O M P o r t s (HO720 / HO730) Installieren und Einstellen Installation and Settings Deutsch / English Installieren und Einstellen des virtuellen COM Ports (HO720 / HO730) Einleitung Laden
Installationshinweise Z250I / Z270I Adapter IR USB Installation hints Z250I / Z270I Adapter IR USB 06/07 (Laden Sie den Treiber vom WEB, entpacken Sie ihn in ein leeres Verzeichnis und geben Sie dieses
Frequently asked Questions for Kaercher Citrix (apps.kaercher.com) Inhalt Content Citrix-Anmeldung Login to Citrix Was bedeutet PIN und Token (bei Anmeldungen aus dem Internet)? What does PIN and Token
Read Online and Download Ebook PONS DIE DREI??? FRAGEZEICHEN, ARCTIC ADVENTURE: ENGLISCH LERNEN MIT JUSTUS, PETER UND BOB DOWNLOAD EBOOK : PONS DIE DREI??? FRAGEZEICHEN, ARCTIC ADVENTURE: Click link bellow
1 Softwareupdate-Anleitung // AC Porty L Netzteileinschub Softwareupdate-Anleitung // AC Porty L Netzteileinschub HENSEL-VISIT GmbH & Co. KG Robert-Bunsen-Str. 3 D-97076 Würzburg-Lengfeld GERMANY Tel./Phone:
Getting started with MillPlus IT V530 Winshape Table of contents: Deutsche Bedienungshinweise zur MillPlus IT V530 Programmierplatz... 3 English user directions to the MillPlus IT V530 Programming Station...
HIR Method & Tools for Fit Gap analysis Based on a Powermax APML example 1 Base for all: The Processes HIR-Method for Template Checks, Fit Gap-Analysis, Change-, Quality- & Risk- Management etc. Main processes
RailMaster New Version 7.00.p26.01 / 01.08.2014 English Version Bahnbuchungen so einfach und effizient wie noch nie! Copyright Copyright 2014 Travelport und/oder Tochtergesellschaften. Alle Rechte vorbehalten.
3 - P O R T H D M I S w i t c h V i s i o n 3 3 2 7 0 3 INDEX 1. I n t r o d u c t i o n... 2 2. S p e c i f i c a t i o n s... 3 3. Package Contents...3 4. P a n e l D e s c r i p t i o n s.. 4 5. Connection
AVANTEK Indoor HDTV Antenna DVB-T Zimmerantenne Instruction Manual Bedienungsanleitung EN 1 Illustration AC Adapter Connecting Box EN 2 Product Introduction This indoor antenna brings you access to free
DIGSI V 4.82 Sehr geehrter Kunde, der USB-Treiber für SIPROTEC-Geräte erlaubt Ihnen, mit den SIPROTEC Geräten 7SJ80/7SK80 über USB zu kommunizieren. Zur Installation oder Aktualisierung des USB-Treibers
How-To-Do Communication to Siemens OPC Server via Content 1 General... 2 1.1 Information... 2 1.2 Reference... 2 2 Configuration of the PC Station... 3 2.1 Create a new Project... 3 2.2 Insert the PC Station...
SELF-STUDY DIARY (or Lerntagebuch) GER102 This diary has several aims: To show evidence of your independent work by using an electronic Portfolio (i.e. the Mahara e-portfolio) To motivate you to work regularly
Bosch iqn-mapper en de Tool Description Werkzeug-Beschreibung iqn-mapper Introduction en 3 1 Introduction 2 Installation 3 Operation Bosch iqn-mapper is a tool to map replay clients to NetApp iscsi systems.
Wi-Fi Range Extender Add-on Device Quickstart Guide Model No. WRP1220 What s inside: 1x Wi-Fi Range Extender 1x Power Adapter All Home8 add-on devices have to work with Home8 systems. Deutsch Schritt 1:
TVHD800x0 Port-Weiterleitung Version 1.1 Inhalt: 1. Übersicht der Ports 2. Ein- / Umstellung der Ports 3. Sonstige Hinweise Haftungsausschluss Diese Bedienungsanleitung wurde mit größter Sorgfalt erstellt.
Routing in WSN Exercise Thomas Basmer telefon: 0335 5625 334 fax: 0335 5625 671 e-mail: basmer [ at ] ihp-microelectronics.com web: Outline Routing in general Distance Vector Routing Link State Routing
Open Source Legal Dos, Don ts and Maybes openlaws Open Source Workshop 26 June 2015, Federal Chancellery Vienna 1 2 3 A Case + vs cooperation since 2003 lawsuit initiated 2008 for violation of i.a. GPL
Algorithms for graph visualization Project - Orthogonal Grid Layout with Small Area W INTER SEMESTER 2013/2014 Martin No llenburg KIT Universita t des Landes Baden-Wu rttemberg und nationales Forschungszentrum
Cube/Disk Station CS407, CS407e, DS408 Kurz-Installationsanleitung SICHERHEITSANWEISUNGEN Bitte lesen Sie vor der ersten Anwendung des Systems diese Sicherheitshinweise und bewahren Sie diese Anleitung
Mini Cube HD Camera Add-on Device Quickstart Guide Model No. IPC2202 What s inside: 1x Mini Cube HD Camera 1x Power Adapter 1x Power Cable Mounting Accessories All Home8 add-on devices have to work with
Sie haben nun Office über Office365 bezogen. Ihr Account wird in Kürze in dem Office365 Portal angelegt. Anschließend können Sie, wie unten beschrieben, die Software beziehen. Congratulations, you have
Installationsanweisung Installation Instructions Notice d installation Instrucciones de montaje Istruzioni per l installazione Programm Update für FWA510 / FWA515 Program update for FWA510 / FWA515 1 2
Lexware Warenwirtschaft Pro XV1100K(C)/XV1100SK(C) All rights reserverd. Any reprinting or unauthorized use wihout the written permission of Lexware Warenwirtschaft Pro Corporation, is expressly prohibited.
Prediction Market, 28th July 2012 Information and Instructions S. 1 Welcome, and thanks for your participation Sensational prices are waiting for you 1000 Euro in amazon vouchers: The winner has the chance
KOBIL SecOVID Token III Manual Einführung Vielen Dank, dass Sie sich für das KOBIL SecOVID Token entschieden haben. Mit dem SecOVID Token haben Sie ein handliches, einfach zu bedienendes Gerät zur universellen
ABB i-bus EIB EIB Power Supply Units Product Range Overview EIB Power Supplies ABB STOTZ-KONTAKT GmbH, 2002 - SK 029 F 02 E Product Range Overview EIB Power Supplies! EIB Power Supply, 320 ma SV/S 30.320.5!
Worx Landroid - Software Update WORX Landroid Software Update für Anwender 30.04.2015 Website: www.worxlandroid.com Direct Direkter Link Link for auf the Update: Update: https://www.worxlandroid.com/en/software-update