Studies leading to a master s degree in technical and engineering mathematics at Johannes Kepler University Linz, with distinction.

Transkript

1 Curriculum Vitae Personal Details Name Dipl.-Ing. Dr. Herbert Address Badstr. 7 A-4490 St. Florian Tel or Date of birth 17. April 1965 Marital status Religion Citizenship Married, 2 children Roman catholic. Austrian Education 1992 Conferral of doctorate with distinction Studies leading to a doctorate in engineering sciences at the Vienna University of Engineering, Faculty for Mechanical Engineering, specialist field of robotics, degree conferred with distinction. Subject of doctoral thesis: Simulation of the human hand-arm system Master of Science with distinction Studies leading to a master s degree in technical and engineering mathematics at Johannes Kepler University Linz, with distinction. Subject of thesis: Analysis, evaluation and creation of a mathematical model for the identification of core rods in the reinforcement of concrete School leaving examination ( A Levels) from the grammar school in Ried (Bundesoberstufenrealgymnasiums Ried i.i.) with very good success. CV, Publikationen Seite 1 von 8

2 Professional Experience Since 2009 Since 2007 Since 2001 Since 1995 Dean of the Faculty of Management of the Uinversity of Applied Sciences Upper Austria. Course director for Operations Management Member of the supervisory board of the TIC Technology & Innovation Center Steyr GmbH (Successor of FAZAT Steyr) Course director of Production und Management und university of applied sciences professor Director of the university of applied sciences in Steyr CEO of FAZAT Steyr GmbH Director of the business area Technology Transfer of the FAZAT Steyr. Consultancy in the fields of Quality management, Product- and Process Development as well as Production Planning und Control Part time lecturer at the LIS Vaduz, Liechtenstein Scientific staff member of the company s department for computer engineering at HILTI AG, FL-9494 Schaan, Liechtenstein. Projects in quality management, product and process development and in database management. Cooperation with Arthur D Little - Cambridge Consultants Ltd University teacher for technical and engineering mathematics in the fields of technical mechanical engineering and mathematics for computer sciences at the Johannes Kepler Universität Linz, A-4040 Linz Specific Teaching Experience Textbook: Althaler J., H., Reitner S., 2010, Wirtschaftsmathematik, Fallstudie zur Beherrschung unternehmerischer Komplexität, Steyr, Ennsthaler Textbook: H., 2008, Produktionsoptimierung, Wertschaffende sowie kundenorientierte Planung und Steuerung, 2. Aufl., Springer, Wien NewYork Setting up the master s degree course in Operations Management 2006 Study Project at University of Greenwich/London Development of a business/ simulation game for the comparison of planning and control operations MRP, KANBAN and CONWIP using RFID Technology CV, Publikationen Seite 2 von 8

3 Director of the development team of the master s degree in Operations Management 2003 Guest professor at University Växjö and University Linköping Since 2002 Since 2002 Assessor for Foundation for International Business Administration Accreditation FIBAA Development of Double Degree Programs 2002 Academic trip to Holland, Belgien and Dänemark based on the theme of Problem Based Learning Head of the academic board of the Austrian university of applied sciences quality commission and chief peer in peer reviews/ audits Course director International Logistics Management Director of development team for degree course in International Logistics Management Foundation and development of the university of applied sciences, Steyr Director of development team for degree course in Production und Management Specific research experience Since 2006 Since 2005 Since 2004 Since 2003 Member of the Association of University professors for Economics as well as in the scientific commissions for Logistics, Production Economics and Operations Research Reviewer at scientific conferences:- Conference Day 2010, Steyr FH Science Results 2009, Steyr FH Science Day 2008, Linz Logistikmanagement 2007 (LOMA 2007) FH Science Day 2007, Wels Symposium on Organizations and Performance 2007, ESC Bretagne FH Science Day 2006, Hagenberg CLADEA 2006 Assembly, Montpellier FH Science Day 2005, Steyr Reviewer on scientific journals European Journal of Operational Research, International Journal of Production Research International Journal of Production Economics und Central European Journal of Operations Research Member of the Austrian Society for Operations Research CV, Publikationen Seite 3 von 8

4 Since 1999 Since 1994 Initialization and management of research projects:- SIMGEN ( , 0,8 Mio, FFG) Robust strategies for hierarchical production planning ( , 0,5 Mio., FWF) e-conwip ( , 0,4 Mio, MIBA, KTM, Rotax, FWF), Integriertes Scheduling ( , 0,2 Mio, Land OÖ), Produktionsoptimierung ( , 0,5 Mio, MAN AG, Palfinger, Bombardier Rotax, Pöttinger, FFG), Produktionssysteme ( , 0,1 Mio, Land OÖ), Strategieorientierte Prozessoptimierung ( , 0,4 Mio, Steyr Nutzfahrzeuge, ZF Passau, Lenzing AG, Greiner Purtec, Eternit Werke Ludwig Hatschek AG, FFG) Organization of conferences Althaler J., H.: Forum Produktion&Management, Produzieren in Einfachheit, Steyr 2008 H.: FH Science Day, Workshop Operations Management, Wels, 2007 Althaler J., H.: Forum Produktion&Management, Wertschaffende Planung und Steuerung, Steyr 2007 H.: FH Science Day, Workshop Operations Management, Hagenberg, 2006 Althaler J., H.: Forum Produktion&Management, Gewinne durch Eigenfertigung neue Wege und Methoden, Steyr 2006 H.: FH Science Day, Workshop Production Management, Steyr, 2005 Engl H., H.: Europäische Experten für österreichische Betriebe Mathematische Modellierungen und Computersimulationen industrieller Prozesse, Steyr, 1994 CV, Publikationen Seite 4 von 8

5 List of publications (last five years) Monographs Althaler J., H., Reitner S., 2010, Wirtschaftsmathematik, Fallstudie zur Beherrschung unternehmerischer Komplexität, 2. Auflage, Ennsthaler, Steyr H., 2008, Produktionsoptimierung, Wertschaffende sowie kundenorientierte Planung und Steuerung, 2. Aufl., Springer, Wien NewYork H., 2007, Produktionsoptimierung, Wertschaffende sowie kundenorientierte Planung und Steuerung, Springer, Wien NewYork (Mit-)Herausgegebene Bände/ co-authored publications H., Arminger J., Engelhardt-Nowitzki C., Hofstadler, H., Kraigher-Krainer J., Losbichler H., Wiesinger S., 2010, Conference Day Proceedings, Steyr, Shaker Verlag Auinger A., Engelhardt C., Gumpinger M., Hofstadler H., Jäger A., H., Kastner H., Kindermann H., Langer J., Lehner M., Leindecker H., Zauner M., 2008, Proceedings FH Science Day, Linz, Shaker Verlag Eidenberger T., H., Kastner J., Kindermann H., Reitner T., Staberhofer F., Zauner M. (alle Hrsg.), 2007, Proceedings FH Science Day, Wels, Shaker Verlag Ecker J., H., Kastner J., Kraigher-Krainer J., Müller-Wipperfürth T., Staberhofer F., Zauner M. (alle Hrsg.), 2006, Proceedings FH Science Day, Hagenberg, Shaker Verlag DreiSincel S., Hendorfer G., H., Kastner J., Müller-Wipperfürth T. (alle Hrsg.), 2005, Proceedings FH Science Day, Steyr, Shaker Verlag Articles published in journals Altendorfer K., H., 2010, An analytical model for service level and tardiness in a single machine production system, Accepted, International Journal of Production Research H., Altendorfer K., 2010, Trade-Off between Capacity Invested and Inventory Needed, European Journal of Operational Research, Vol. 203/1, Weidenhiller A. and H., 2009, Equivalence classes of problem instances for a continuous-time lot sizing and scheduling problem, Accepted, European Journal of Operational Research, Vol. 199/1, H., 2008, Customer driven Production Planning, International Journal of Production Economics, Vol. 111/2, H., 2008, A time continuous analytic production model for service level, WIP, lead-time and utilization, International Journal of Production Research, Vol. 46/ H., 2006, An approach for integrated scheduling and lot-sizing, European Journal of Operational Research, Vol.172/2, CV, Publikationen Seite 5 von 8

6 H., Huber A., 2006, Service level performance of MRP, KANBAN, CONWIP and DBR due to parameter stability and environmental robustness, International Journal of Production Research, Vol. 46/8, H., Stöcher W., 2006, Little s Law in a continuous setting, International Journal of Production Economics, Vol. 103, Issue 1, H., 2005, Range, work in progress and utilization, International Journal of Production Research, Vol. 43, Nr. 22, H., 2005, Definition and properties of the input-weighted average lead-time, European Journal of Operational Research, Volume 164, Issue 2, H., Palmetshofer K., Reitner S., 2005, Implizite Determinierung von Plan- Belegungszeiten, Wirtschaftsinformatik, Heft 2, Other Proceedings or contributions to publications Altendorfer K., Pilstl J., Hübl A., H., Flexible Production Simulation for Applied Sciences, Proceedings of the International Workshop on Modelling & Applied Simulation 2009, Teneriffa, Spain Hübl A., Altendorfer K., H., Pilstl J., Customer Driven Capacity Setting, Advances in Production Management Systems APMS 2009 Proceedings, Bordeaux, France, 2009 Hübl A., Altendorfer K., Dickbauer M., H., Concept for CONWIP implementation in SAP R/3, 3. Research Forum of the Austrian Universities of Applied Sciences, Villach, Austria, pp Altendorfer K., H., 2009, Simple cumulative model for Due Date Setting, in Leobner Logistik Cases Angeli Christoph, H., 2008, Sales Planning and Forecasts in the Steel Industry, Proceedings FH Science Day 2008, Linz, Shaker, Hübl A., H., 2008, A Combined Approach for Capacity Checking, Due Date Setting and Stock Availability in an MTO Environment, Proceedings FH Science Day 2008, Linz, Shaker, Altendorfer K., Weidenhiller A., H., 2008, Liefertreue determinierender Engpass und MTO Fähigkeit, Tagungsband zum 2. Forschungsforum der Österreichischen Fachhochschulen Altendorfer K., Huber A., H., 2007, Behaviour of MRP, Kanban, CONWIP and DBR under dynamic environmental variability, Leobner Logistik Cases in Management komplexer Materialflüsse mittels Simulation State-of-the-Art innovative Konzepte, S Altendorfer K., H., 2007, An Approach for Capacity Checking and Due Date Adjustment, Proceedings FH Science Day 2007, Wels, Shaker, Weidenhiller A., H., 2007, Fast Generation of Production Schedules on a Single Machine, 11 th International Conference on Computer Aided Systems Theory, Eurocast 2007, Lecture Notes in Computer Science, Vol. 4739, Springer, CV, Publikationen Seite 6 von 8

7 Altendorfer K., H., 2006, The concept of customer driven production planning for evaluation of job shop system performance, Proceedings FH Science Day 2006, Hagenberg, Shaker, H., Reitner S., Weidenhiller A., 2006, Reformulation and Solution Approaches for an Integrated Scheduling Model, Computational Science and Its Applications - ICCSA 2006, Proceedings of the ICCSA Conference in Glasgow, Lecture Notes in Computer Science, Vol. 3984, Springer, Kronberger G., Weidenhiller A., Kerschbaumer B., H., 2006, Automated Simulation Model Generation for Scheduler-Benchmarking in Manufacturing, Proceedings of the International Mediterranean Modelling Multiconference (I3M 2006), Barcelona, Spain, pp Promberger W., H., 2006, Make Span Minimization for Parallel machines, Proceedings FH Science Day 2006, Hagenberg, Shaker, Other publications H., 2009, Werkzeuge zur Kapazitätsflexibilisierung, Industriemanagement, 3/2009, H., 2008, Wege zur Einfachheit, Industriemanagement, 3, H., 2008, Kombinierte Verschnitt- und Bestandsoptimierung, PPS Management, 3, H., 2007, Wertschaffende Auslegung der Produktion, PPS Management, 2, H., Gmainer R., 2007, Entscheidung unter der Lupe, Logistik Heute, 29. Jahrgang, Altendorfer K., H., 2007, CONWIP Hohe Liefertreue bei gleichzeitig niedrigen Beständen, PPS Management , H., Gmainer R., 2007, Produktionsverlagerung unter der Lupe Eine empirische Studie österreichischer Produktionsunternehmen, Industrie Management, 1, H., Gmainer R., 2006, Potenzialidentifikation durch Anwendung eines PPS- Planspiels, PPS Management, 3, H., Gmainer R., 2006, Erfolgsfaktor Liefertreue Hohe Liefertreue sichert Wettbewerbsvorteile, PPS Management, 4, H., Gmainer R., 2006, Auslagern - aber richtig, Factory 09/2006, H., Stockinger S., Weger Ch., 2006, Auslastung: Erfolgskennzahl für Produktionsleiter?, Industrie Management, 4, H., 2006, Studie: Mehr Liefertreue, kürzere Lieferzeit, Logistik Heute, 10/2006, H., Promberger W., 2006, Minimale Belegungszeit paralleler Anlagen, PPS Management, 1, CV, Publikationen Seite 7 von 8

8 H., Schaumberger W., 2005, Erfolgsfaktor Flexibilität Was zeichnet liefertreue Unternehmen aus?, PPS Management, 3, H., Gmainer R., 2005, Das Dilemma der PPS-Systeme, Factory 09/2005, CV, Publikationen Seite 8 von 8