Lenkstange Factory Race CFK Radioplatte Alu 3 mm CNC 7075 Factory Race Radioplatte CFK Factory Race

Größe: px

Ab Seite anzeigen:

Download "614408 Lenkstange Factory Race CFK. 614409 Radioplatte Alu 3 mm CNC 7075 Factory Race 614410 Radioplatte CFK Factory Race"

Meta Schmitz
vor 7 Jahren
Abrufe

1 MATRIXUpgrades Hauptzahnrad 46 Z. Stahl gehärtet Querlenkerhalter vorne unten CNC Radstand Einstell-Set 3+3mm Radstand Einstell-Set 2+4mm Radstand Einstell-Set 1+5mm Radstand Einstell-Set 6mm Stoßdämpferhalteplatte vorne 5mm Alu Stoßdämpferhalteplatte vorne CFK Lenkstange Factory Race CFK Obere Platte vorne Factory Race CFK Obere Platte vorne CNC 7075 Alu Kupplungsglocke 13 Z. belüftet Kupplungsglocke 14 Z. belüftet Kupplungsglocke 15 Z. Belüftet Tellerrad Stahl Differential 38 Zähne M1 Querlenkerhalteplatten hinten ALU CNC Toe-In 2º Anti-Squat 2º Toe-In 2º Anti-Squat 3º Toe-In 3º Anti-Squat 1º Toe-In 3º Anti-Squat 2º Toe-In 3º Anti-Squat 3º Toe-In = Vorspur Anti-Squat = Anstellwinkel Kupplungsbeläge CNC Alu (Satz) Kupplungsfedern 1,1 gold hart (Satz) Querlenkerhalter Heck vorne CNC Kegelrad Stahl Differential 11Zähne M Achsschenkel hinten CNC 7075 Alu Achsschenkelträger vorne (19) Alu Achsschenkelträger vorne (22) Alu Abstützung Mitteldiff. Factory Race CFK Abstützung Mitteldiff. Factory Race Alu Differential Alu Gehäuse (1) Achsschenkel vorne Alu Differential Alu Gehäuse (2) Querlenkerhalter vorne oben CNC Chassis Abstützung vorne Chassis Abstützung hinten Stoßdämpferhalteplatte hinten 5mm Alu Stoßdämpferhalteplatte hinten CFK Weitere Upgrades ohne Abbildung Bestell-Nr Aluminium Spurstangen M8x Federn weiß hart Roto Start kpl. Set Getriebeplatte Roto Start Radioplatte Alu 3 mm CNC 7075 Factory Race Radioplatte CFK Factory Race Chassis CNC 7075 Factory Race Typ L = Chassis lang. Radstand mm Chassis CNC 7075 Factory Race Typ S = Chassis kurz. Radstand mm Produktinformationen von Krick Modelltechnik D Knittlingen oder Fehler und Änderungen vorbehalten! Stand Januar 2006

614402 Stoßdämpferhalteplatte vorne 5mm Alu 614403 Stoßdämpferhalteplatte vorne CFK 614408 Lenkstange Factory Race CFK 614407 Obere Platte vorne Factory Race CFK 614427 Obere Platte vorne CNC 7075

2 MATRIX UPGRADE DESCRIPTIONS Bestell-Nr CNC Machined Chassis This hard anodized machined 7075 CNC chassis is engineered for strength while offering a lightweight design CNC Machined front shock tower (Red) This CNC 7075 front shock tower is extremely strong and lightweight for superior performance Carbon Fiber Front Shock Tower This front shock tower is ultra light weight and is recommended for racing purposes CNC 7075 Rear Shock Tower This rear shock tower is extremely strong and lightweight for superior performance Carbon Fiber Rear Shock Tower This Rear shock tower is ultra light weight and is recommended for racing purposes Carbon Fiber Factory Race center diff brace Ultra lightweight center diff brace in carbon fiber Carbon Fiber Factory Race upper Plate Ultra lightweight upper plate in carbon fiber Carbon Fiber Factory Race Steering Brace Ultra lightweight steering brace in carbon fiber CNC 7075 Machined Aluminum Radio Tray This radio tray offers rigid strength with precision machine work Carbon Fiber Factory Race Radio Tray This radio tray is made of carbon fiber and is ultra lightweight CNC 7075 Machined Rear Hubs Strength, durability, and efficient performance is exactly what these magnificently machined hubs bring to the table. These hubs offer superb performance and long lasting results.

614403 Carbon Fiber Front Shock Tower This front shock tower is ultra light weight and is recommended for racing purposes.

3 Bestell-Nr CNC 7075 Machined Caster Blocks (19 degree) These precision 19 degree 7075 machined caster blocks are flex free while offering racing performance. ** CNC Machined Steering Knuckles These precision 7075 CNC steering knuckles are designed for durability while adding a flashy look to your buggy. Replace your cast knuckles with CEN s Machined steering knuckles to achieve greater durability! ** fits the following vehicles: CEN Matrix, Kyosho MP7, 7.5, 777, HB buggy CNC 7075 Machined Caster Blocks (22 degree) These precision 22 degree 7075 machined caster blocks are flex free along with superb racing performance Front CNC Machined Chassis Brace Font 7075 Machined Chassis Brace adds durability to the chassis while making it more rigid for racing purposes Rear CNC Machined Chassis Brace Rear 7075 Machined Chassis Brace adds durability to the chassis while making it more rigid for racing purposes CNC Aluminum Lightweight Clutch Shoes CEN s new lightweight CNC aluminum Clutch shoes will work on most 1/8 th scale buggies. These shoes grab the clutch bell with extreme grip, which allows the buggy to take off on command. CEN s CNC aluminum shoes last longer and deliver bottom end clutch power for racing purposes mm clutch springs CEN s 1.1mm gold series clutch springs fit on most 1/8 th scale buggies. Stiffer clutch springs allow your clutch to engage harder, which provides more bottom end power CNC Machined 2 degree toe in and 2 degree anti squat rear block CNC Machined 2 degree to in and 3 degree anti squat rear block Machined Steel 46t Spur Gear Super hard Steel 46 tooth spur gear that is extremely durable.

Replace your cast knuckles with CEN s Machined steering knuckles to achieve greater durability! ** fits the following vehicles: CEN Matrix, Kyosho MP7, 7.5, 777, HB buggy.

4 Bestell-Nr CNC 7075 Aluminum CenterDiff Brace This CNC 7075 Aluminum Center Diff brace offer added strength to the buggy for racing purposes CNC 7075 Aluminum front 2.5mm Upper Plate This front upper plate is lightweight and rigid for racing purposes CNC Front upper Suspension brace. Take the durability to the next level with this super strong CNC 7075 front Suspension Brace CNC 7075 Front lower Suspension Brace This CNC Front lower aluminum suspension brace is a must have for any race enthusiast. Increases durability 50% CNC 7075 Rear / front aluminum suspension brace This aluminum suspension brace offers added durability and is recommended for all racing and bashing purposes CNC Rear Block 3 degree toe in and 1 degree anti squat CNC Rear Block 2 degree toe in and 3 degree anti squat CNC machined block offers long term strength along with fine tuning adjustments for when you need it. Recommended for the serious racer CNC Rear Block 2 degree toe in and d2 degree anti squat Machined Steel pinion drive gear 11t This Machined Steel pinion is ultra strong and lasts long. Recommended for racing purposes Machined Steel Bevel Gear 38t This machines Steel 38t bevel gear replaces the cast gear and is much stronger. Recommended for racing purposes. *** Hardened Steel vented clutch bells These clutch bells will fit most 1/8 th scale buggies and are ultra hard. Vented to keep the clutch cool and allow debris to exit. These clutch bells are recommended for all purposes, whether you re racing or bashing.

Take the durability to the next level with this super strong CNC 7075 front Suspension Brace.

5 Glossar: Anti-Squat: Als Anti-Squat bezeichnet man den Anstellwinkel der hinteren Querlenker. (Das hintere Ende des Querlenkers etwas höher gelagert ist als das vordere) Mehr Anti-Squat führt zu mehr Vortrieb und kann auf sehr unebenen Strecken von Vorteil sein. Toe in (Vorspur): Veränderungen durch wechseln der unterschiedlicher Halteplatten für die Querlenkerstifte an der Hinterachse. Caster (Nachlauf an der Vorderachse) Nachlauf ist der Winkel der Achse des Lenkhebelträgers zur Fahrbahn. Positiver Nachlauf bedeutet dabei, dass das obere Ende des Radträgers dem Heck des Fahrzeugs näher ist als das untere Ende.

Vorteil sein. Toe in (Vorspur): Veränderungen durch wechseln der unterschiedlicher Halteplatten für die Querlenkerstifte an der Hinterachse.

Ähnliche Dokumente

MATRIX TR Arena Bestell-Nr. 610610+610611 Ersatzteilliste

MATRIX TR Arena Bestell-Nr. 610610+610611 Ersatzteilliste Renn-Truggy mit lackierter Karosserie 28 Motor und Seilzugstarter wahlweise mit 3-Kanal FM Drehknopf-Fernsteuerung mit Empfänger und zwei Servos