LCD Colour TV. LCD Colour TV KLV-V32A10E/KLV-V40A10E KLV-V32A10E KLV-V40A10E KLV-V32A10E KLV-V40A10E
|
|
- Johann Adenauer
- vor 2 Jahren
- Abrufe
Transkript
1 (1) LCD Colour TV KLV-V32A10E/KLV-V40A10E LCD Colour TV Operating Instructions Before operating the TV, please read the Safety information section of this manual. Retain this manual for future reference. Bedienungsanleitung Lesen Sie vor der Inbetriebnahme des Fernsehgeräts bitte den Abschnitt Sicherheitsinformationen in dieser Anleitung. Bewahren Sie die Anleitung zum späteren Nachschlagen auf. Gebruiksaanwijzing Alvorens de televisie te gebruiken, dient u de paragraaf met "Veiligheidsinformatie" in deze handleiding te lezen. Bewaar deze handleiding zodat u deze in de toekomst kunt raadplegen. GB DE NL KLV-V32A10E KLV-V40A10E Manual de Instruções Antes de utilizar o televisor, por favor leia a secção Informações de segurança deste manual. Guarde este manual para futuras consultas. Bruksanvisning Før du bruker TVen, må du lese gjennom avsnittet "Sikkerhetsinformasjon" i denne håndboken. Ta vare på håndboken for fremtidig referanse. PT NO KLV-V32A10E KLV-V40A10E (1) Printed in Spain 2005 Sony Corporation
2 WARNING To prevent the risk of electric shock, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be used and should be destroyed. To prevent the risk of fire or electric shock, do not expose the TV set to rain or moisture. Dangerously high voltages are present inside the TV set. Do not open the cabinet. Refer servicing to qualified personnel only. Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Trademark information PlayStation is a trademark of Sony Computer Entertainment, Inc. TruSurround technology is used as a virtualizer for Dolby Virtual Surround. TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc. This TV incorporates High-Definition Multimedia Interface (HDMI ) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. 2 GB
3 Table of Contents Safety information... 4 Precautions... 7 Disposal of the TV set... 7 Overview of the remote... 8 Overview of the TV buttons and indicators... 9 Getting Started 1: Checking the accessories : Inserting batteries into the remote : Connecting an aerial/vcr : Preventing the TV from toppling over : Switching on the TV : Selecting the language and country/ region : Auto-tuning the TV Watching TV Watching TV Viewing pictures from connected equipment Screen Control menu...25 Auto Format...25 Screen Format...25 Screen Shift...25 Features menu...26 Power Saving...26 Speaker...26 AV2 Output...26 Picture Off...27 Timer menu...28 Sleep Timer...28 Auto Shutoff...28 Set Up menu...29 Auto Start Up...29 Language...29 Country...29 Auto Tuning...30 Programme Sorting...30 Programme Labels...30 AV Preset...31 Manual Programme Preset...31 Using Optional Equipment Connecting optional equipment...34 Programming the remote...36 GB Using the Menu Navigating through menus Overview of the menus Picture Adjustment menu Mode Contrast/Brightness/Colour/Hue/Sharpness/ Backlight Colour Tone Noise Reduction Dynamic Picture Gamma Correction Reset Sound Adjustment menu Effect (sound effect) Treble/Bass/Balance Auto Volume Dual Sound Volume (headphone volume) Dual Sound Reset Additional Information Specifications...38 Troubleshooting...39 Index GB
4 Safety information Mains lead Unplug the mains lead when moving the TV set. Do not move the TV set with the mains lead plugged in. It may damage the mains lead and result in fire or electric shock. If you damage the mains lead, it may result in fire or electric shock. Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken, causing a short-circuit, which may cause fire or electric shock. Do not modify or damage the mains lead. Do not put anything heavy on the mains lead. Do not pull the mains lead. Keep the mains lead away from heat sources. Be sure to grasp the plug when disconnecting the mains lead. If the mains lead is damaged, stop using it and ask your dealer or Sony service centre to exchange it. Do not use the supplied mains lead on any other equipment. Use only an original Sony mains lead, not other brands. Mains lead/cable protection Pull out the mains lead/cable by the plug. Do not pull on the mains lead/cable itself. Mains Do not use a poor fitting mains socket. Insert the plug fully into the mains socket. A poor fit may cause arcing and result in fire. Contact your electrician to have the mains socket changed. Optional accessories Observe the following when installing the TV set using a stand or wall-mount bracket. If you do not do so, the TV set may fall and cause serious injury. Use the specified wall-mount bracket or stand. Secure the TV set properly, following the instructions supplied with your stand or wall-mount bracket when installing the TV set. Be sure to attach the brackets supplied with your stand. Installation If the TV set is to be installed on a wall, have the installation carried out by qualified service men. Improper installation may render the TV set unsafe. Medical institutions Do not place this TV set in a place where medical equipment is in use. It may cause malfunction of medical instruments. Carrying Before carrying the TV set, disconnect all the cables from the TV set. When you carry the TV set by hand, hold the TV set as illustrated on the right. If you do not do so, the TV set may fall and be damaged or cause serious injury. If the TV set has been dropped or damaged, have it checked immediately by qualified service personnel. When transporting it, do not subject the TV set to jolts or excessive vibration. The TV set may fall and be damaged or cause serious injury. When you carry the TV set in for repair or when you move it, pack it using the original carton and packing material. Carrying the TV set requires two or more people. Ventilation Never cover the ventilation holes in the cabinet. It may cause overheating and result in fire. Unless proper ventilation is provided, the TV set may gather dust and get dirty. For proper ventilation, observe the following: Do not install the TV set turned backwards or sideways. Do not install the TV set turned over or upside down. Do not install the TV set on a shelf or in a closet. Do not place the TV set on a rug or bed. Do not cover the TV set with cloth, such as curtains, or items such as newspapers, etc. Leave some space around the TV set. Otherwise, aircirculation may be inadequate and cause overheating, which may cause fire or damage to the TV set. 30 cm 10 cm 10 cm Leave at least this much space. 4 GB
5 When installing the TV set on the wall, leave at least 10 cm space from the bottom of the TV set. Never install the TV set as follows: Air circulation is blocked. Wall Ventilation holes Do not insert anything in the ventilation holes. If metal or liquid is inserted in these holes, it may result in fire or electric shock. Air circulation is blocked. Placement Never place the TV set in hot, humid or excessively dusty places. Do not install the TV set where insects may enter. Do not install the TV set where it may be exposed to mechanical vibration. Place the TV set on a stable, level surface. Otherwise, the TV set may fall and cause injury. Do not install the TV set in a location where it may protrude, such as on or behind a pillar, or where you might bump your head on it. Otherwise, it may result in injury. Water and moisture Do not use this TV set near water for example, near a bathtub or shower room. Also do not expose to rain, moisture or smoke. This may result in fire or electric shock. Do not touch the mains lead and the TV set with wet hands. Doing so may cause electric shock or damage to the TV set. Wall Moisture and flammable objects Do not let this TV set get wet. Never spill liquid of any kind on the TV set. If any liquid or solid object does fall through openings in the cabinet, do not operate the TV set. It may result in electric shock or damage to the TV set. Have it checked immediately by qualified service personnel. To prevent fire, keep flammable objects (candles, etc.) and electric bulbs away from the TV set. Oils Do not install this TV set in restaurants that use oil. Dust absorbing oil may enter and damage the TV set. Fall Place the TV set on a secure, stable stand. Do not hang anything on the TV set. If you do, the TV set may fall from the stand or wallmount bracket, causing damage or serious injury. Do not allow children to climb on the TV set. Vehicle or ceiling Do not install this TV set in a vehicle. The motion of the vehicle may cause the TV set to fall down and cause injury. Do not hang this TV set from the ceiling. Ships and other vessels Do not install this TV set on a ship or other vessel. If the TV set is exposed to seawater, it may cause fire or damage the TV set. Outdoor use Do not expose the TV set to direct sunlight. The TV set may heat up and this may result in damage to the TV set. Do not install this TV set outdoors. Wiring Unplug the mains lead when wiring cables. When hooking up, be sure to unplug the mains lead for your safety. Take care not to catch your feet on the cables. It may damage the TV set. Cleaning Unplug the mains lead when cleaning the mains plug and this TV set. If you do not, it may result in electric shock. Clean the mains plug regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate and result in fire. Lightning storms For your own safety, do not touch any part of the TV set, mains lead, or aerial lead during lightning storms. Continued 5 GB
6 Damage requiring service If the surface of the TV set cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result. Servicing Do not open the cabinet. Entrust the TV set to qualified service personnel only. Small accessories removal and fittable Keep accessories out of children s reach. If they are swallowed, choking or suffocation may occur. Call a doctor immediately. Broken glass Do not throw anything at the TV set. The screen glass may explode by the impact and cause serious injury. When not in use For environmental and safety reasons, it is recommended that the TV set is not left in standby when unused. Disconnect from the mains. However, some TV sets may have features which need the TV set to be left in standby to work correctly. The instructions in this manual will inform you if this applies. Viewing the TV To view the TV comfortably, the recommended viewing position is from four to seven times the screen s vertical length away from the TV set. View the TV in moderate light, as viewing the TV in poor light strains your eyes. Watching the screen continuously for long periods of time can also strain your eyes. If the angle of the TV set is to be adjusted, steady the base of the stand with your hand to prevent the TV set from becoming separated from the stand. Be careful not to get your fingers caught between the TV set and the stand. Volume adjustment Adjust the volume so as not to trouble your neighbours. Sound carries very easily at night time. Therefore, closing the windows or using headphones is suggested. When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result. Overloading This TV set is designed to operate on a V AC supply only. Take care not to connect too many appliances to the same mains socket as this could result in fire or electric shock. Heat Do not touch the surface of the TV set. It remains hot, even after the TV set has been turned off for some time. Corrosion If you use this TV set near the seashore, salt may corrode metal parts of the TV set and cause internal damage or fire. It may also shorten the life of the TV set. Steps should be taken to reduce the humidity and moderate the temperature of the area where the TV set is located. 6 GB
7 Precautions LCD Screen Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction. Do not expose the LCD screen surface to the sun. Doing so may damage the screen surface. Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD panel may be damaged. If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises. Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments. The screen and cabinet get warm when this TV set is in use. This is not a malfunction. The LCD contains a small amount of liquid crystal and mercury. The fluorescent tube used in this TV set also contains mercury. Follow your local ordinances and regulations for disposal. Fluorescent lamp This TV set uses a special fluorescent lamp as its light source. If the screen image becomes dark, flickers, or does not appear, the fluorescent lamp has worn out and the LCD screen should be replaced. For replacement, consult qualified service personnel. Installing the TV set Do not install the TV set in places subject to extreme temperature, for example in direct sunlight, or near a radiator, or heating vent. If the TV set is exposed to extreme temperature, the TV set may overheat and cause deformation of the casing or cause the TV set to malfunction. The TV set is not disconnected from the mains when the TV set is switched off. To disconnect the TV set completely, pull the plug from the mains. To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed down from the ceiling. Do not install optional components too close to the TV set. Keep optional components at least 30 cm away from the TV set. If a VCR is installed in front of the TV set or beside the TV set, the picture may become distorted. Handling and cleaning the screen surface/cabinet of the TV set The screen surface is finished with a special coating to prevent strong light reflections. To avoid material degradation or screen coating degradation, observe the following precautions. Do not push on the screen, scratch it with a hard object, or throw anything at it. The screen may be damaged. Do not touch the display panel after operating the TV set continuously for a long period as the display panel becomes hot. We recommend that the screen surface be touched as little as possible. To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. You can wash and repeatedly use the soft cloth. Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material. The ventilation holes can accumulate dust over time. To ensure proper ventilation, we recommend removing the dust periodically (once a month) using a vacuum cleaner. Disposal of the TV set Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic office, your household waste disposal service or the shop where you purchased the product. 7 GB
8 Overview of the remote wa w; ql qk qj qh qg qf qd VCR AUX/VIDEO TV TV MODE 0 OK 9 MENU PROG TV DVD AUX RM-EA qa qs 1 TV "/1 TV standby Switches off the TV temporarily, and on from standby mode. 2 Media selector (page 36) Selects which equipment you want to operate. A green light will be momentarily lit to show which one you have selected. 3 TV mode (page 18) 4 / Input select / Text hold In TV mode (page 18): Selects the input source from equipment connected to the TV sockets. In Text mode (page 17): Holds the current page. 5 Screen mode (page 18) 6 Number buttons In TV mode: Selects channels. For channel numbers 10 and above, enter the second digit within three seconds. In Text mode: Enters the three digit page number to select the page. 7 / -/-- Previous channel / VCR double digit In TV mode: Returns to the previous channel watched (for more than five seconds). In VCR mode: Selects the double-digit channels for Sony s VCR (e.g., for 23, press -/-- and then the 2 and 3). 8 / Text (page 17) 9 M/m/</,/OK (page 16, 18, 19) q; Screen memo (page 16) qa PROG +/- (page 16) In TV mode: Selects the next (+) or previous (-) channel. In Text mode: Selects the next (+) or previous (-) page. qs MENU (page 19) qd 2 +/- Volume qf Sleep Timer (page 28) qg NexTView (page 17) qh Coloured buttons In NexTView mode (page 17): Sorts the programmes. In VCR and DVD mode (page 36): Operates the main functions of your VCR or DVD. qj / Info / Text reveal In TV mode: Displays information such as current channel number and screen mode. In Text mode (page 17): Reveals hidden information (e.g., answers to a quiz). qk Picture mode (page 21) ql 9 Sound effect (page 23) w; % Mute (page 16) wa AUX/VIDEO "/1 Switches your equipment on/off, as programmed on the remote (page 36). Tip The M/m/</,, 2+, PROG+, and number 5 buttons have tactile dots. Use the tactile dots as references when operating the TV. 8 GB
9 Overview of the TV buttons and indicators 1 1 Power Switches the TV on or off. OK MENU PROG PROG +/-/ / In TV mode: Selects the next (+) or previous (-) channel. In TV menu: Moves through the options up ( ) or down ( ) /-/ / Increases (+) or decreases (-) the volume. In TV menu: Moves through the options left ( ) or right ( ). 4 / Input select/ok In TV mode (page 18): Selects the input source from equipment connected to the TV sockets. In TV menu: Selects the menu or option, and confirm the setting. 5 (page 19) 6 Picture Off/Sleep Timer indicator Lights up in green when the picture is switched off (page 27). Only the picture is switched off (the sound remains unchanged). Lights up in orange when the Sleep Timer is set (page 28). 7 1 Standby indicator Lights up in red when the TV is in standby mode. 8 ` Power indicator Lights up in green when the TV is switched on. 9 Remote control sensor GB
10 Getting Started 1: Checking the accessories 2: Inserting batteries into the remote Remote RM-EA001 (1) Size AA batteries (R6 type) (2) Coaxial cable (1) Mains lead (Type C-6) (1) Do not remove these ferrite cores. Cable holder (1) Support belt (1) and screws (2) Notes Observe the correct polarity when inserting batteries. Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of the battery. Please consult your local authority. Do not use different types of batteries together or mix old and new batteries. Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. Do not place the remote in a location near a heat source, or in a place subject to direct sunlight, or in a damp room. 10 GB
11 3: Connecting an aerial/vcr A Rear of the TV 1 Coaxial cable (supplied) Getting Started 3 Mains lead (supplied) B Rear of the TV 3 Mains lead (supplied) (SMART LINK) RF lead (not supplied) VCR Scart lead (not supplied) Coaxial cable (supplied) 2-1 IN OUT Continued 11 GB
12 1 Connect your aerial with the supplied coaxial cable. If connecting to an aerial only (A) Connect your aerial to the socket on the rear of the TV, then go to step 3. If connecting to a VCR with an aerial (B) Connect your aerial to the input socket on your VCR. 2 Connect your VCR. 1 Connect the output socket on your VCR to the socket on the rear of the TV with the RF lead. 2 Connect the scart socket on your VCR to the / 2 scart socket on the rear of the TV with a scart lead. 3 Connect the supplied mains lead to the AC IN socket on the rear of the TV. Note Do not connect the mains lead to your mains socket until all connections are complete. 4 Bundle the cable. 1 Attach the cable holder to the rear of the TV (A), then turn the cable holder a quarter turn to the left (B). 2 Push the clasp lever in to release the lock and open the cover, and then insert the cables. 3 Close the cover until it clicks shut and locks B A 12 GB
13 4: Preventing the TV from toppling over After all connections are completed, secure the TV. Getting Started Fasten the supplied support belt to the stand with the supplied screw. 2 Fit the supplied support belt to the TV stand, then firmly fasten with the supplied screw using a screw driver or coin, etc. 3 While supporting the TV, tighten the supplied support belt to adjust the length. 5: Switching on the TV Connect the TV to your mains socket ( V AC, 50Hz). 2 Press 1 on the TV (right side). When you switch on the TV for the first time, the Language menu appears on the screen, then go to 6: Selecting the language and country/region on page 14. When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press TV +/1 on the remote to switch on the TV. 13 GB
14 6: Selecting the language and country/ region When you switch on the TV for the first time, the Language menu appears on the screen. AUX/VIDEO TV TV 2 Press M/m to select the country/region in which you will operate the TV, then press OK. Country Select Country United Kingdom Ireland Nederland België/Belgique Luxembourg France Italia Schweiz/Suisse/Svizzera Deutschland Österreich DVD AUX VCR DIGITAL MODE If the country/region in which you want to use the TV does not appear in the list, select - instead of a country/region. The message confirming the TV start auto-tuning appears on the screen, then go to 7: Auto-tuning the TV on page OK 1,2 1,2 MENU PROG 1 Press M/m to select the language displayed on the menu screens, then press OK. Language Select Language 14 GB
15 7: Auto-tuning the TV After selecting the language and country/region, a message confirming the TV start auto-tuning appears on the screen. You must tune the TV to receive channels (TV broadcasts). Do the following to search and store all available channels. AUX/VIDEO TV 1 Press OK to select Yes. Do you want to start automatic tuning? Yes m No Auto Tuning Programmes found: 05 Getting Started Searching... TV VCR DVD AUX MODE OK MENU PROG 1 3 The TV starts searching for all available channels. This may take some time, please be patient and do not press any buttons on the TV or remote. Once all available channels have been stored, the TV returns to normal operation, displaying the channel stored on channel number 1. When a message appears for you to confirm the aerial connections No channels are found. Check all the aerial connections and press OK to start auto-tuning again. 2 When the Programme Sorting menu appears on the screen, follow steps 2 to 3 of Programme Sorting (page 30). If you do not change the order in which the channels are stored on the TV, go to step 3. 3 Press MENU to exit. The TV has now tuned in all the available channels. 15 GB
16 Watching TV Watching TV 2 Press the number buttons or PROG +/- to select a TV channel. To select channel numbers 10 and above using the number buttons, enter the second digits within three seconds. Additional operations 1 To Turn off the TV temporarily (Standby mode) Turn off the TV completely Do this Press TV "/1. Press 1 on the TV (right side). VCR AUX/VIDEO TV TV DVD AUX MODE Adjust the volume Mute the sound Return to the previous channel watched (for more than five seconds) Press 2 + (increase) /- (decrease). Press %. Press again to restore. Press Access the Programme index table Switch the TV automatically to the standby mode after a specified time period Sleep Press OK. To select a channel, press M/m, then press OK. To access the Input signal index table, see page 18. Press. For details, see page 28. OK Temporarily freeze and review the picture on the screen Press. Press again to cancel. MENU PROG 2 1 Press 1 on the TV (right side) to switch on the TV. When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press TV "/1 on the remote to switch on the TV. 16 GB
17 To access Text Press /. Each time you press /, the display changes cyclically as follows: Text t Text over the TV picture (mix mode) t No Text (exit the Text service) To select a page, press the number buttons or PROG +/-. To hold a page, press /. To reveal hidden information, press /. Tips Ensure that the TV is receiving a good signal, or some text errors may occur. Most TV channels broadcast a Text service. For information on the use of the service, select the index page (usually page 100). When four coloured items appear at the bottom of the Text page, Fastext is available. Fastext allows you to access pages quickly and easily. Press the corresponding coloured button to access the page. To access NexTView (depending on availability of service) NexTView is an electronic programme guide. 1 When a channel which provides a NexTView service is selected ( NexTView is displayed as soon as the data is available), press. 2 Press M/m/</, to select the displayed option, then press OK to confirm. To turn off NexTView, press again Programmes: Displays the programme list by time when the TV receives 50% or less of the NexTView data ( NexTView is displayed in orange when a channel is selected), and displays the programme list by time and channel when the TV receives more than 50% of the NexTView data ( NexTView is displayed in black when a channel is selected). The percentage may differ depending on your area. 5 Info: Displays programme description. To record the programme (only VCRs which support SmartLink and Timer Programming features), press the red button. To display a reminder message when the programme is broadcast, press the green button. You can set up to five programmes. Notes Wrong characters appear on the screen if the language used in the NexTView does not match the language set on your TV. Set Language to the language used in the NexTView (page 29). Also set Country to the country/ region from which the NexTView programme is broadcast (page 29). Record and Remind are not available once the programme has started. Watching TV 01 Mon 02 Tue 03 Wed 04 Thu 05 Fri 06 Sat 07 Sun 9 : 15 : 03 4 TV1 TV2 TV3 TV4 TV5 TV6 TV7 TV8 9 : 00 9 : : 00 Magazine Songs from the shows Weather Forecast Mike's show Euro Newscast Fantasy film Mars War Home Shopping Europe Euro Sports News Painter s Show Magazine AM Live Show Euro Sports Euro magazine Euro Sports Home Shopping Europe Euro Newscast Info: OK 5 1 (All)/ (Entertainment)/ (Children)/ (Art)/ (Sports)/ (News)/ (Movies)/ (Music): Lists programmes by category. 2 (Only when more than eight channels provide NexTView): Creates a channel list. You can store up to eight channels. To restore the factory setting channels, select Auto B. 3 : Shows a reminder list (for details, see 5 Info ). Continued 17 GB
18 To change the screen mode manually to suit the broadcast Press repeatedly to select Wide, Smart, 4:3, 14:9, or Zoom. Wide Displays wide screen (16:9) broadcasts in the correct proportions. Smart* Displays conventional 4:3 broadcasts with an imitation wide screen effect. The 4:3 picture is stretched to fill the screen. 4:3 Displays conventional 4:3 broadcasts (e.g., non-wide screen TV) in the correct proportions. 14:9* Displays 14:9 broadcasts in the correct proportions. As a result, black border areas are visible on the screen. Zoom* Displays cinemascopic (letter box format) broadcasts in the correct proportions. * Parts of the top and bottom of the picture may be cut off. Tips Alternatively, you can set Auto Format to On. The TV will automatically select the best mode to suit the broadcast (page 25). You can adjust the portion of the picture when selecting Smart, 14:9, or Zoom. Press M/m to move up or down (e.g., to read subtitles). Viewing pictures from connected equipment Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned VCR (page 11) Press PROG +/-, or the number buttons, to select the video channel. For other connected equipment Press / repeatedly until the correct input symbol (see below) appears on the screen. 1/ 1, 2/ 2, 3/ 3: Audio/video or RGB input signal through the scart socket / 1, 2 or 3. appears only if an RGB source has been connected. 4: Component input signal through the Y, PB/CB, PR/CR sockets / 4, and audio input signal through the L/G/S/I, R/D/D/D sockets / 4. 5: Digital audio/video signal is input through the HDMI IN 5 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket. 6/ 6: Video input signal through the video socket 6, and audio input signal through the audio socket L/G/S/I (MONO), R/D/D/D sockets 6. appears only if the equipment is connected to the S video socket 6 instead of the video socket 6, and S video input signal is input through the S video socket 6. Additional operations To Return to the normal TV operation Access the Input signal index table Do this Press. Press OK, then press,. To select an input source, press M/m, then press OK. 18 GB
19 Using the Menu Navigating through menus AUX/VIDEO TV TV 1 Press MENU to display the menu. 2 Press M/m to select a menu icon. 3 Press M/m/</, to select an option. 4 Press M/m/</, to change/set the setting, then press OK. To exit the menu, press MENU. To return to the last display, press <. DVD AUX VCR MODE Using the Menu OK 2,3,4 4 MENU PROG 1 Continued 19 GB
20 The following options are available in each menu. For details on navigating through menus, see page 19. Also, see page in parentheses for details of each menu Overview of the menus Picture Adjustment Mode: Contrast: Brightness: Colour: Hue: Sharpness: Backlight: Colour Tone: Noise Reduction: Dynamic Picture: Gamma Correction: Reset Custom Cool Auto On 0 Select: Set: OK End: MENU 1 Picture Adjustment Mode (21) Contrast/Brightness/Colour/Hue/Sharpness/ Backlight (21) Colour Tone (21) Noise Reduction (22) Dynamic Picture (22) Gamma Correction (22) Reset (22) 5 Timer Sleep Timer (28) Auto Shutoff (28) 6 Set Up Auto Start Up (29) Language (29) Country (29) Auto Tuning (30) Programme Sorting (30) Programme Labels (30) AV Preset (31) Equipment labels/edit/skip Manual Programme Preset (31) Programme/System/Channel/Label/AFT/ Audio Filter/Skip/Decoder/Confirm Note The options you can adjust vary depending on the situation. Only the options that can be operated are displayed. 2 Sound Adjustment Effect (23) Treble/Bass/Balance (23) Auto Volume (23) Dual Sound (24) Volume (24) Dual Sound (24) Reset (24) 3 Screen Control Auto Format (25) Screen Format (25) Screen Shift (25) V Shift/H Shift/Reset 4 Features Power Saving (26) Speaker (26) AV2 Output (26) Picture Off (27) 20 GB
32A10E KLV-S26A10E KLV-S23A10E KLV-S19A10E
2-635-384-13(3) KLV-S40A10E KLV-S32A10E KLV-S26A10E KLV-S23A10E KLV-S19A10E 2-635-384-13(3) LCD Colour TV KLV-S40A10E KLV-S32A10E KLV-S26A10E KLV-S23A10E KLV-S19A10E KLV-S40A10E KLV-S32A10E KLV-S26A10E
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
LCD Digital Colour TV
2-658-164-11(3) LCD Digital Colour TV Operating Instructions Before operating the TV, please read the Safety information section of this manual. Retain this manual for future reference. GB Bedienungsanleitung
PDP Colour TV. PDP Colour TV KE-V42A10E KE-V42A10E KE-V42A10E
2-638-642-11(2) PDP Colour TV KE-V42A10E PDP Colour TV Operating Instructions Before operating the TV, please read the Safety information section of this manual. Retain this manual for future reference.
ONLINE LICENCE GENERATOR
Index Introduction... 2 Change language of the User Interface... 3 Menubar... 4 Sold Software... 5 Explanations of the choices:... 5 Call of a licence:... 7 Last query step... 9 Call multiple licenses:...
KLV-30MR1. LCD Colour TV GB DE FR NL. Operating Instructions Bedienungsanleitung Manual de instrucciones Mode d emploi 4-094-069-11 (1)
4-094-069-11 (1) LCD Colour TV KLV-30MR1 Operating Instructions Bedienungsanleitung Manual de instrucciones Mode d emploi GB DE FR NL 2003 Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A
1. General information... 2 2. Login... 2 3. Home... 3 4. Current applications... 3
User Manual for Marketing Authorisation and Lifecycle Management of Medicines Inhalt: User Manual for Marketing Authorisation and Lifecycle Management of Medicines... 1 1. General information... 2 2. Login...
MU-307 A SAFETY INSTRUCTIONS SICHERHEITSHINWEISE FEATURES MERKMALE
SAFETY INSTRUCTIONS Read all safety instruction before operating the amplifiers. 1. Install equipment as follow condition: - Install at flat place, not bending curved. - Do not install near the water and
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= How to Disable User Account Control (UAC) in Windows Vista You are attempting to install or uninstall ACT! when Windows does not allow you access to needed files or folders.
Titelbild1 ANSYS. Customer Portal LogIn
Titelbild1 ANSYS Customer Portal LogIn 1 Neuanmeldung Neuanmeldung: Bitte Not yet a member anklicken Adressen-Check Adressdaten eintragen Customer No. ist hier bereits erforderlich HERE - Button Hier nochmal
E asyline by Hama GmbH & Co KG Postfach 80 86651 Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/502-274 hama@hama.de www.hama.
00021024-10.06 E asyline by Hama GmbH & Co KG Postfach 80 86651 Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/502-274 hama@hama.de www.hama.com Gamepad Thunderstorm II 0021024 l Bedienungsanleitung
KE-42MR1 KE-50MR1 2002 Sony Corporation. Flat Panel Colour TV GB DE ES FR
4-093-114-11 (1) Flat Panel Colour TV KE-42MR1 KE-50MR1 2002 Sony Corporation Operating Instructions Bedienungsanleitung Manual de instrucciones Mode d emploi GB DE ES FR NOTICE FOR CUSTOMERS IN THE UNITED
NEWSLETTER. FileDirector Version 2.5 Novelties. Filing system designer. Filing system in WinClient
Filing system designer FileDirector Version 2.5 Novelties FileDirector offers an easy way to design the filing system in WinClient. The filing system provides an Explorer-like structure in WinClient. The
C R 2025 C LOSE PUSH OPEN
3V C R 2025 C LOSE PUSH OPEN ) ) ) 25 222 3V C R 2025 C LOSE PUSH OPEN 25 222 3V C R 2025 C LOSE PUSH OPEN 25 222 Den här symbolen på produkten eller i instruktionerna betyder att den elektriska
CABLE TESTER. Manual DN-14003
CABLE TESTER Manual DN-14003 Note: Please read and learn safety instructions before use or maintain the equipment This cable tester can t test any electrified product. 9V reduplicated battery is used in
GAMING HEADSET LX16 PRO
GAMING HEADSET LX6 PRO CHAT GAME Content Inhalt Lioncast LX6 Pro gaming headset Lioncast LX6 Pro Gaming Headset Inline remote kabelgebundene Fernbedienung MUTE - MIC - ON XBOX PS PS PC RCA splitter cable
Anleitung zur Schnellinstallation TFM-560X YO.13
Anleitung zur Schnellinstallation TFM-560X YO.13 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 6 Version 06.08.2011 1. Bevor Sie anfangen Packungsinhalt ŸTFM-560X
PS3 / PS4 / PC XBOX 360 GAMING HEADSET LX16
PS / PS / PC XBOX 60 GAMING HEADSET LX6 CHAT GAME Content Inhalt Lioncast LX6 gaming headset Lioncast LX6 Gaming Headset Inline remote kabelgebundene Fernbedienung MUTE - MIC - ON XBOX PS PS PC RCA splitter
KURZANLEITUNG. Firmware-Upgrade: Wie geht das eigentlich?
KURZANLEITUNG Firmware-Upgrade: Wie geht das eigentlich? Die Firmware ist eine Software, die auf der IP-Kamera installiert ist und alle Funktionen des Gerätes steuert. Nach dem Firmware-Update stehen Ihnen
Bedienungsanleitung HiFi-Miniverstärker HVA 200
Bedienungsanleitung HiFi-Miniverstärker HVA 200 863-008 Einführung Geehrter Kunde, wir möchten Ihnen zum Erwerb Ihres neuen Hifi-Verstärkers gratulieren! Mit dieser Wahl haben Sie sich für ein Produkt
PDP Colour TV KE-P37XS1 KE-P42XS1. Operating Instructions. Bedienungsanleitung. Manual de Instrucciones. Mode d'emploi 4-102-916-11 (1)
4-102-916-11 (1) R PDP Colour TV KE-P37XS1 KE-P42XS1 Operating Instructions Before operating the TV, please read the Safety Information section of this manual. Retain this manual for future reference.
SmartClass Firmware-Update Vorgehensweise
Benutzeranweisungen SmartClass Firmware-Update Vorgehensweise 2008.01 (V 1.x.x) Deutsch Please direct all enquiries to your local JDSU sales company. The addresses can be found at: www.jdsu.com/tm-contacts
miditech midiface 4x4
miditech midiface 4x4 4In-/4 Out USB MIDI Interface 4 x MIDI In / 4 x MIDI Out USB MIDI Interface 64 MIDI Kanäle 4 LEDs für MIDI Input 4 LEDs für MIDI Output Power LED USB Powered, USB 1, 2 und 3 kompatibel
ALL1681 Wireless 802.11g Powerline Router Quick Installation Guide
ALL1681 Wireless 802.11g Powerline Router Quick Installation Guide 1 SET ALL1681 Upon you receive your wireless Router, please check that the following contents are packaged: - Powerline Wireless Router
RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät
Betriebsanleitung RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät ä 2 Operating Instructions RS232 Connection, RXU10 Setting up an RS232 connection
TV for Android Phone & Tablet with micro USB
Android TM TV for Android Phone & Tablet with micro USB Quick Guide English > 3 Deutsch > 5 Safety Information > 8 About tivizen EN Tivizen is a mobile live TV receiver on your Phone & Tablet, anywhere.
How-To-Do. Hardware Configuration of the CC03 via SIMATIC Manager from Siemens
How-To-Do Hardware Configuration of the CC03 via SIMATIC Manager from Siemens Content Hardware Configuration of the CC03 via SIMATIC Manager from Siemens... 1 1 General... 2 1.1 Information... 2 1.2 Reference...
AVANTEK. Indoor HDTV Antenna DVB-T Zimmerantenne. Instruction Manual Bedienungsanleitung
AVANTEK Indoor HDTV Antenna DVB-T Zimmerantenne Instruction Manual Bedienungsanleitung EN 1 Illustration AC Adapter Connecting Box EN 2 Product Introduction This indoor antenna brings you access to free
Parameter-Updatesoftware PF-12 Plus
Parameter-Updatesoftware PF-12 Plus Mai / May 2015 Inhalt 1. Durchführung des Parameter-Updates... 2 2. Kontakt... 6 Content 1. Performance of the parameter-update... 4 2. Contact... 6 1. Durchführung
KE-32TS2E KE-42TS2E. Flat Panel Colour TV GB DE ES FR. Operating Instructions Bedienungsanleitung Manual de instrucciones Mode d emploi
4-094-602-11 (1) Flat Panel Colour TV KE-32TS2E KE-42TS2E 2003 Sony Corporation Operating Instructions Bedienungsanleitung Manual de instrucciones Mode d emploi GB DE ES FR NOTICE FOR CUSTOMERS IN THE
KOBIL SecOVID Token III Manual
KOBIL SecOVID Token III Manual Einführung Vielen Dank, dass Sie sich für das KOBIL SecOVID Token entschieden haben. Mit dem SecOVID Token haben Sie ein handliches, einfach zu bedienendes Gerät zur universellen
Cisco SSPA122. Installation und manuelle Rekonfiguration. Dokumentenversion 1
Cisco SSPA122 Installation und manuelle Rekonfiguration Dokumentenversion 1 Placetel UC-One Cisco SPA122 Installation und manuelle Rekonfiguration Copyright Hinweis Copyright 2015 finocom AG Alle Rechte
v i r t u A L C O M P o r t s
v i r t u A L C O M P o r t s (HO720 / HO730) Installieren und Einstellen Installation and Settings Deutsch / English Installieren und Einstellen des virtuellen COM Ports (HO720 / HO730) Einleitung Laden
Softwareupdate-Anleitung // AC Porty L Netzteileinschub
1 Softwareupdate-Anleitung // AC Porty L Netzteileinschub Softwareupdate-Anleitung // AC Porty L Netzteileinschub HENSEL-VISIT GmbH & Co. KG Robert-Bunsen-Str. 3 D-97076 Würzburg-Lengfeld GERMANY Tel./Phone:
Schnell-Start-Anleitung Quick Start Guide
Schnell-Start-Anleitung Quick Start Guide 3 1. Cube anschließen Schließen Sie den Cube an die Stromversorgung an. Verbinden Sie den Cube mit dem Router. Die Power- und die Internet-LED beginnen zu blinken,
Instruktionen Mozilla Thunderbird Seite 1
Instruktionen Mozilla Thunderbird Seite 1 Instruktionen Mozilla Thunderbird Dieses Handbuch wird für Benutzer geschrieben, die bereits ein E-Mail-Konto zusammenbauen lassen im Mozilla Thunderbird und wird
UWC 8801 / 8802 / 8803
Wandbedieneinheit Wall Panel UWC 8801 / 8802 / 8803 Bedienungsanleitung User Manual BDA V130601DE UWC 8801 Wandbedieneinheit Anschluss Vor dem Anschluss ist der UMM 8800 unbedingt auszuschalten. Die Übertragung
Installations-Anleitung JetCalc und Komponenten. Manual for JetCalc and components
Installations-Anleitung JetCalc und Komponenten Manual for JetCalc and components Version 1.0 Datum: 11. April 2006 2 Inhaltsverzeichnis 1 Herunterladen Software / Download software 3 1.1 JetCalc 3 1.2.net
How to access licensed products from providers who are already operating productively in. General Information... 2. Shibboleth login...
Shibboleth Tutorial How to access licensed products from providers who are already operating productively in the SWITCHaai federation. General Information... 2 Shibboleth login... 2 Separate registration
ReadMe zur Installation der BRICKware for Windows, Version 6.1.2. ReadMe on Installing BRICKware for Windows, Version 6.1.2
ReadMe zur Installation der BRICKware for Windows, Version 6.1.2 Seiten 2-4 ReadMe on Installing BRICKware for Windows, Version 6.1.2 Pages 5/6 BRICKware for Windows ReadMe 1 1 BRICKware for Windows, Version
Cable Tester NS-468. Safety instructions
Cable Tester NS-468 Safety instructions Do not use the cable tester NS-468 if it is damaged. This device is only for use inside dry and clean rooms. This device must be protected from moisture, splash
microkontrol/kontrol49 System Firmware Update
microkontrol/kontrol49 System Firmware Update Update Anleitung (für Windows) Dieses Update ist lediglich mit Windows XP kompatibel, versuchen Sie dieses nicht mit Windows 98/ME und 2000 auszuführen. 1.
Ingenics Project Portal
Version: 00; Status: E Seite: 1/6 This document is drawn to show the functions of the project portal developed by Ingenics AG. To use the portal enter the following URL in your Browser: https://projectportal.ingenics.de
TomTom WEBFLEET Tachograph
TomTom WEBFLEET Tachograph Installation TG, 17.06.2013 Terms & Conditions Customers can sign-up for WEBFLEET Tachograph Management using the additional services form. Remote download Price: NAT: 9,90.-/EU:
Installation Instructions
EN DE Installation Instructions WLAN Installation Kit, 300 Mbps, 5 GHz, 16 dbi AK-4 Wireless Kit Scope of delivery Junction box AK-4 (1x) 1 Connection board AK-4 CB with 12VDC power supply unit (1x) 2
Art.-Nr. 4450900300 greentea. Art.-Nr. 4450900200 whitemusk MAGICUS. 1 Stück/piece 2,5. 4 x 4 x 4 x. 1 x
MAGICUS Art.-Nr. 4450900300 greentea 1 Stück/piece Art.-Nr. 4450900200 whitemusk 2,5 4 x 4 x 4 x 1 x 1. 2. 1 x Option 2 Option 1 3. 1 3 4 2 4. I AUTO RUN Mo Tu We Th Fr Sa Su OK + Clear R 230VAC, 50Hz
Anleitung zur Schnellinstallation TFM-561U
Anleitung zur Schnellinstallation TFM-561U V1 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 5 Version 08.25.2010 1. Bevor Sie anfangen Packungsinhalt TFM-561U Treiber
User Manual Bedienungsanleitung. www.snom.com. snom Wireless Headset Adapter snom Schnurlos-Headset-Adapter. English. Deutsch
English snom Wireless Headset Adapter snom Schnurlos-Headset-Adapter Deutsch User Manual Bedienungsanleitung 2007 snom technology AG All rights reserved. Version 1.00 www.snom.com English snom Wireless
NVR Mobile Viewer for iphone/ipad/ipod Touch
NVR Mobile Viewer for iphone/ipad/ipod Touch Quick Installation Guide DN-16111 DN-16112 DN16113 2 DN-16111, DN-16112, DN-16113 for Mobile ios Quick Guide Table of Contents Download and Install the App...
Uhrenbeweger Watch winders. Crystal
Uhrenbeweger Watch winders Crystal Sehr geehrter Kunde, unsere Uhrenbeweger sind so konstruiert, dass sie trotz kompakter Abmessungen nur geringe Laufgeräusche verursachen. Jeder Antrieb erzeugt jedoch
Bedienungsanleitung Netzwerkkabeltester ST-45 v2
Bedienungsanleitung Netzwerkkabeltester ST-45 v2 Einführung Geehrter Kunde, wir möchten Ihnen zum Erwerb Ihres neuen Kabeltesters gratulieren! Mit dieser Wahl haben Sie sich für ein Produkt entschieden,
300Mbps Wireless Outdoor PoE Access Point/Bridge Quick Installation Guide
LevelOne WAB-5120 300Mbps Wireless Outdoor PoE Access Point/Bridge Quick Installation Guide English Deutsch - 1 - Table of Content English... - 3 - Deutsch... - 9 - This guide covers only the most common
Please store in a safe place. Bitte sicher aufbewahren.
equinux ID: Password/Passwort: 1 Please store in a safe place. Bitte sicher aufbewahren. English Mac Thank you for choosing an equinux product Your new TubeStick includes The Tube, a modern and convenient
Frequently asked Questions for Kaercher Citrix (apps.kaercher.com)
Frequently asked Questions for Kaercher Citrix (apps.kaercher.com) Inhalt Content Citrix-Anmeldung Login to Citrix Was bedeutet PIN und Token (bei Anmeldungen aus dem Internet)? What does PIN and Token
5 TFT LCD MONITOR LCM 1250 BEDIENUNG / OPERATION AUF DEN BILDSCHIRM SEHEN! DON T WATCH AND DRIVE!
5 TFT LCD MONITOR LCM 1250 BEDIENUNG / OPERATION ACHTUNG FAHRER! CAUTION! NICHT WÄHREND DER FAHRT AUF DEN BILDSCHIRM SEHEN! DON T WATCH AND DRIVE! Sicherheitshinweise 1. Achten Sie darauf, dass durch die
BLK-2000. Quick Installation Guide. English. Deutsch
BLK-2000 Quick Installation Guide English Deutsch This guide covers only the most common situations. All detail information is described in the user s manual. English BLK-2000 Quick Installation Guide
How-To-Do. Hardware Configuration of the CPU 317NET with external CPs on the SPEED Bus by SIMATIC Manager from Siemens
How-To-Do Hardware Configuration of the CPU 317NET with external CPs on the SPEED Bus by SIMATIC Manager from Siemens Content Hardware Configuration of the CPU 317NET with external CPs on the SPEED Bus
Worx Landroid - Software Update
Worx Landroid - Software Update WORX Landroid Software Update für Anwender 30.04.2015 Website: www.worxlandroid.com Direct Direkter Link Link for auf the Update: Update: https://www.worxlandroid.com/en/software-update
Prediction Market, 28th July 2012 Information and Instructions. Prognosemärkte Lehrstuhl für Betriebswirtschaftslehre insbes.
Prediction Market, 28th July 2012 Information and Instructions S. 1 Welcome, and thanks for your participation Sensational prices are waiting for you 1000 Euro in amazon vouchers: The winner has the chance
Software-Update Version 1.0.10 manual. In order to keep your door systems updated, please proceed with the following changes.
Software-Update Version 1.0.10 manual In order to keep your door systems updated, please proceed with the following changes. 1. Exchange CPU -Z1 (E60-0228-10) by the new one you already received. Front
OMNITRONIC DSP Control Installationsanweisungen bis Version 1.3.1
OMNITRONIC DSP Control Installationsanweisungen bis Version 1.3.1 Bitte befolgen Sie diese Schritt-für-Schritt Anleitung genau, nachdem Sie ein Software Update von unserer Website heruntergeladen haben.
150Mbps Micro Wireless N USB Adapter
150Mbps Micro Wireless N USB Adapter TEW-648UBM ŸAnleitung zur Schnellinstallation (1) ŸTroubleshooting (6) 1.11 1. Bevor Sie anfangen Packungsinhalt ŸTEW-648UBM ŸCD-ROM (Dienstprogramm & Bedienungsanleitung)
TV Integrated AV System TAV-L1
2-670-721-21(3) When transporting the system, follow the protection procedure (page 9). Lors du transport de la chaîne, respectez la procédure de protection (page 9). Wenn Sie die Anlage transportieren
Nachdem Sie die Datei (z.b. t330usbflashupdate.exe) heruntergeladen haben, führen Sie bitte einen Doppelklick mit der linken Maustaste darauf aus:
Deutsch 1.0 Vorbereitung für das Firmwareupdate Vergewissern Sie sich, dass Sie den USB-Treiber für Ihr Gerät installiert haben. Diesen können Sie auf unserer Internetseite unter www.testo.de downloaden.
iid software tools QuickStartGuide iid USB base RFID driver read installation 13.56 MHz closed coupling RFID
iid software tools QuickStartGuide iid software tools USB base RFID driver read installation write unit 13.56 MHz closed coupling RFID microsensys Jun 2013 Introduction / Einleitung This document describes
Exercise (Part II) Anastasia Mochalova, Lehrstuhl für ABWL und Wirtschaftsinformatik, Kath. Universität Eichstätt-Ingolstadt 1
Exercise (Part II) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
Bedienungsanleitung User Manual. System AED Plus
Bedienungsanleitung User Manual System AED Plus INHALTSVERZEICHNIS TABLE OF CONTENTS Einleitung Sicherheitshinweise Verwendungszweck... 3 Lieferumfang Technische Daten Zubehör.... 4 Montage. 5 Bedienung
RailMaster New Version 7.00.p26.01 / 01.08.2014
RailMaster New Version 7.00.p26.01 / 01.08.2014 English Version Bahnbuchungen so einfach und effizient wie noch nie! Copyright Copyright 2014 Travelport und/oder Tochtergesellschaften. Alle Rechte vorbehalten.
Leister SYSTEM SINGLE PATCH MODULE SPM 01
D GB Leister SYSTEM SINGLE PATCH MODULE SPM 01 Leister Process Technologies Galileo-Strasse 10 CH-05 Kaegiswil/Switzerland Tel. +41-41 4 4 Fax +41-41 4 1 www.leister.com sales@leister.com Einbauanleitung
Bedienungsanleitung Ferngesteuerter GT-Rennwagen McTrack Challange
Bedienungsanleitung Ferngesteuerter GT-Rennwagen McTrack Challange Einführung Geehrter Kunde, wir möchten Ihnen zum Erwerb Ihres neuen GT-Rennwagen gratulieren! Mit dieser Wahl haben Sie sich für ein Produkt
www.yellowtools.com E-License - Product Activation E-License - Produktaktivierung
www.yellowtools.com E-License - Product Activation E-License - Produktaktivierung A-1 Yellow Tools E-License Activation Yellow Tools E-License Activation A-2 Dear user, thanks for purchasing one of our
Load balancing Router with / mit DMZ
ALL7000 Load balancing Router with / mit DMZ Deutsch Seite 3 English Page 10 ALL7000 Quick Installation Guide / Express Setup ALL7000 Quick Installation Guide / Express Setup - 2 - Hardware Beschreibung
Bedienungsanleitung 3-Wege Auto-HiFi-Set MEGAKICK Daytona
Bedienungsanleitung 3-Wege Auto-HiFi-Set MEGAKICK Daytona 750-070/-071/-072 Einführung Geehrter Kunde, wir möchten Ihnen zum Erwerb Ihres neuen HiFi-Sets gratulieren! Mit dieser Wahl haben Sie sich für
Contact 1600 QUICK REFERENCE GUIDE GUIDE D UTILISATION BEDIENUNGSANLEITUNG GUÍA DE REFERENCIA RÁPIDA GUIDA RAPIDA. www.sonybiz.net CHANGING THE WAY
Contact 1600 CHANGING THE WAY QUICK REFERENCE GUIDE GUIDE D UTILISATION BEDIENUNGSANLEITUNG BUSINESS GUÍA DE REFERENCIA RÁPIDA GUIDA RAPIDA COMMUNICATES www.sonybiz.net GB Getting started STEP 1 Turning
Thema: Sonnenuhren (7.Jahrgangsstufe)
Thema: Sonnenuhren (7.Jahrgangsstufe) Im Rahmen des Physikunterrichts haben die Schüler der Klasse 7b mit dem Bau einfacher Sonnenuhren beschäftigt. Die Motivation lieferte eine Seite im Physikbuch. Grundidee
Release Notes BRICKware 7.5.4. Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0
Release Notes BRICKware 7.5.4 Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0 Purpose This document describes new features, changes, and solved problems of BRICKware 7.5.4.
miditech 4merge 4-fach MIDI Merger mit :
miditech 4merge 4-fach MIDI Merger mit : 4 x MIDI Input Port, 4 LEDs für MIDI In Signale 1 x MIDI Output Port MIDI USB Port, auch für USB Power Adapter Power LED und LOGO LEDs Hochwertiges Aluminium Gehäuse
USB Treiber updaten unter Windows 7/Vista
USB Treiber updaten unter Windows 7/Vista Hinweis: Für den Downloader ist momentan keine 64 Bit Version erhältlich. Der Downloader ist nur kompatibel mit 32 Bit Versionen von Windows 7/Vista. Für den Einsatz
PRO SCAN WASSERANALYSE PER SMARTPHONE WATER ANALYSIS BY SMARTPHONE ANALYSE DE L EAU PAR SMARTPHONE
N02 WASSERANALYSE PER SMARTPHONE WATER ANALYSIS BY SMARTPHONE ANALYSE DE L EAU PAR SMARTPHONE NO 2 NO 3 ph Cl 2 CO 2 ANALYSE DIAGNOSE LÖSUNG ANALYSIS DIAGNOSIS SOLUTION THE NEW GENERATION ph KH GH N03
PCTV DVB-S2 Stick (461e) Quick Start Guide Kurzanleitung
PCTV DVB-S2 Stick (461e) Quick Start Guide Kurzanleitung 2013 PCTV Systems S.à r.l. QI-461E-V1-4LANG Lieferumfang 1 2 3 4 5 6 Installation I. II. III. IV. V. VI. Lieferumfang* Beispielhafte Abbildungen
CONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP
ANLEITUNGEN // INSTRUCTIONS CONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP BEDIENUNGSANLEITUNG // INSTRUCTION MANUAL MONTAGEANLEITUNG // ASSEMBLY INSTRUCTION MONTAGEANLEITUNG // ASSEMBLY INSTRUCTION KOPPLUNG
PocketCinema A100 W WiFi Connection Guide. PocketCinema A100W. WiFi Connection Guide. for Local version: 12718. Page 1
PocketCinema A100W WiFi Connection Guide for Local version: 12718 Page 1 1. Apple AirPlay Mode (peer to peer) a. Turn on the A100W and wait until the SSID & Password information is shown on the top of
!!! UNBEDINGT BEACHTEN!!!
Produktinformation 201501_197PAdeen Deutsch Seite 1 5 English page 6 10 Solldaten-Update Achsvermessung 2015 WA 900 / 920 / 020 / 950 / 970 CURA S 800 / 860 / 060 / 900 / 960 WAB01 / WAB 02 CCT / RoboLigner
Installationsanweisung Installation Instructions Notice d installation. Instrucciones de montaje Istruzioni per l installazione. Programm Update.
Installationsanweisung Installation Instructions Notice d installation Instrucciones de montaje Istruzioni per l installazione Programm Update für FWA510 / FWA515 Program update for FWA510 / FWA515 1 2
BEDIENUNGSANLEITUNG FUER UHRWERK KALIBER VD 33 & VD 34 MANUAL FOR MOVEMENT CAL. VD 33 & VD 34
BEDIENUNGSANLEITUNG FUER UHRWERK KALIBER VD 33 & VD 34 MANUAL FOR MOVEMENT CAL. VD 33 & VD 34 2 BEDIENUNGSANLEITUNG FUER KALIBER VD 33 und VD 34 BATTERIE: SR920SW ANZEIGE: MULTIFUNKTIONSUHR MIT ZWEITER
XV1100K(C)/XV1100SK(C)
Wlan Telefon Aastra 312w XV1100K(C)/XV1100SK(C) All rights reserverd. Any reprinting or unauthorized use wihout the written permission of Wlan Telefon Aastra 312w Corporation, is expressly prohibited.
Bedienungsanleitung / User Manual. PAR 56 RGB LED PAR 64 RGB LED (183x10mm LED s) mit 5 DMX Kanälen/ with 5 DMX channles
Bedienungsanleitung / User Manual PAR 56 RGB LED PAR 64 RGB LED (183x10mm LED s) mit 5 DMX Kanälen/ with 5 DMX channles Inhalt 1 Sicherheitsbestimmungen... 3 2 Übersicht... 3 3 Funktionen... 4 3.1 Automatischer
Effizienz im Vor-Ort-Service
Installation: Anleitung SatWork Integrierte Auftragsabwicklung & -Disposition Februar 2012 Disposition & Auftragsabwicklung Effizienz im Vor-Ort-Service Disclaimer Vertraulichkeit Der Inhalt dieses Dokuments
Directions. Trouble shooting
Betriebsanleitung 1. Legen Sie die Uhr mit der Vorderwand auf den Tisch und öffnen Sie die Rückwand des Uhrengehäuses (A). 2. Entfernen Sie das Papier welches zwischen die Rückwand und Tonfeder geklemmt
HIR Method & Tools for Fit Gap analysis
HIR Method & Tools for Fit Gap analysis Based on a Powermax APML example 1 Base for all: The Processes HIR-Method for Template Checks, Fit Gap-Analysis, Change-, Quality- & Risk- Management etc. Main processes
Getting started with MillPlus IT V530 Winshape
Getting started with MillPlus IT V530 Winshape Table of contents: Deutsche Bedienungshinweise zur MillPlus IT V530 Programmierplatz... 3 English user directions to the MillPlus IT V530 Programming Station...
Bedienungsanleitung Bitte sorgfältig vor Gebrauch lesen
AUNA Wireless Stereo 863MHz Speaker System Bedienungsanleitung Bitte sorgfältig vor Gebrauch lesen Einführung Dieses 863 MHz kabellose Stereo Lautsprecher-System macht sich die neueste Wireless Technik
EMCO Installationsanleitung Installation instructions
EMCO Installationsanleitung Installation instructions Installationsanleitung Installation instructions Digitalanzeige digital display C40, FB450 L, FB600 L, EM 14D/17D/20D Ausgabe Edition A 2009-12 Deutsch...2
Hazards and measures against hazards by implementation of safe pneumatic circuits
Application of EN ISO 13849-1 in electro-pneumatic control systems Hazards and measures against hazards by implementation of safe pneumatic circuits These examples of switching circuits are offered free
Bedienungsanleitung Hydraulischer Rangier-Wagenheber
Einführung Geehrter Kunde, wir möchten Ihnen zum Erwerb Ihres neuen Wagenhebers gratulieren! Mit dieser Wahl haben Sie sich für ein Produkt entschieden, welches ansprechendes Design und durchdachte technische
HiOPC Hirschmann Netzmanagement. Anforderungsformular für eine Lizenz. Order form for a license
HiOPC Hirschmann Netzmanagement Anforderungsformular für eine Lizenz Order form for a license Anforderungsformular für eine Lizenz Vielen Dank für Ihr Interesse an HiOPC, dem SNMP/OPC Gateway von Hirschmann
USBASIC SAFETY IN NUMBERS
USBASIC SAFETY IN NUMBERS #1.Current Normalisation Ropes Courses and Ropes Course Elements can conform to one or more of the following European Norms: -EN 362 Carabiner Norm -EN 795B Connector Norm -EN
XV1100K(C)/XV1100SK(C)
Lexware Warenwirtschaft Pro XV1100K(C)/XV1100SK(C) All rights reserverd. Any reprinting or unauthorized use wihout the written permission of Lexware Warenwirtschaft Pro Corporation, is expressly prohibited.
XAIR-Bridge: Installationshinweise XAIR-Bridge: Short Installation Guide (English Version on Page 10)
XAIR-Bridge: Installationshinweise XAIR-Bridge: Short Installation Guide (English Version on Page 10) Bridge Ergänzung zu XAIR LOS GEHT S/GETTING STARTED Ziel und Zweck Diese Installationshinweise beschreiben