Installations- und Konfigurationsanleitung. VistaCam CL.iX. 1 Installation. 2 Konfiguration. 2.1 Konfiguration in DBSWIN einstellen
|
|
- Teresa Franke
- vor 7 Jahren
- Abrufe
Transkript
1 DE Installations- und Konfigurationsanleitung VistaCam CL.iX Nur ausgebildete Fachkräfte dürfen das Gerät aufstellen, installieren und in Betrieb nehmen. Mindestanforderungen Imaging-Programm Rechnersystem DBSWIN oder VistaEasy von Dürr Dental Fremdsoftware auf Anfrage siehe Systemanforderungen an Rechnersysteme Bildgebung ( /01) 1 Installation Basisstation erst an den Computer anschließen, wenn der Installationsassistent dazu auffordert. Alle Programme schließen. Mitgelieferte DBSWIN-DVD (ab Version 5.1) in das DVD-Laufwerk legen. Das Startfenster öffnet sich. Wenn die DVD nicht automatisch startet, die Datei "CD_Start.exe" ausführen. Gewünschte Sprache wählen. Registerkarte "Treiber" wählen. 2.1 Konfiguration in DBSWIN einstellen DBSWIN starten. Im Menü Optionen > Konfiguration anzeigen wählen. Auf die Schaltfläche "Module" klicken. Auf "Video" doppelklicken. Das Fenster "Video-Eigenschaften" öffnet sich. Bildexport einstellen Registerkarte "Einstellungen" wählen. Auf "Duerr Dental Treiber Installation" klicken. Meldung mit "OK" bestätigen. Der Installationsassistent "Dürr Dental Treiber Setup" startet. Anweisungen des Installationsassistenten folgen. Dabei die Kamera auf Anweisung mit dem Computer verbinden bzw. Verbindung trennen. 2 Konfiguration Die Konfiguration ist abhängig vom verwendeten Imaging-Programm: - DBSWIN: Siehe 2.1 Konfiguration in DBSWIN einstellen (weitere Einstellungen sind in VistaCamConfig möglich) - VistaEasy und Fremdsoftware (z. B. Sidexis): Siehe 2.2 Konfiguration in VistaCamConfig einstellen "Bild automatisch exportieren" aktivieren/deaktivieren. Jedes Bild wird automatisch in einen definierten Pfad kopiert. Den Pfad, das Dateiformat und weitere Einstellungen sind im Modul Lichttisch eingestellt. 1 / 6
2 Basisstation einstellen Registerkarte "Basisstation" wählen. Handauslösung einstellen Registerkarte "Handauslösung" wählen. Die Basisstation wird automatisch erkannt. Der COM-Port wird angezeigt. Bei Mehrplatzbetrieb oder bei Funküberschneidungen (z. B. durch Funkfußschalter) können Sie den Kanal einstellen. Den am Handstück eingestellten Kanal unter Kanal Kamera wählen (siehe auch Gebrauchsanweisung VistaCam CL.iX ). Kanal des Funkfußschalters unter "Kanal Funkfußschalter" wählen. Quellen für Funktionsauslösung aktivieren/deaktivieren. Videoquelle einstellen Es können zwei Kameras angeschlossen werden. Wenn nur eine Kamera angeschlossen wird, Einstellungen in der Registerkarte "Videoquelle 1" vornehmen. Wenn die Kamera als zweite Kamera angeschlossen wird, Einstellungen in der Registerkarte "Videoquelle 2" vornehmen. Registerkarte "Videoquelle 1" oder "Videoquelle 2" wählen. Prüfen, dass der Anschluss mit dem COM-Port der Basisstation übereinstimmt (siehe Basisstation einstellen). Die Handauslösung ist vom Werk aus auf Standardwerte eingestellt und kann nicht verändert werden. Konfiguration speichern Auf "Ausführen" klicken. Auf "OK" klicken. Das Fenster schließt sich automatisch. Die Ansteuerungsart "WDM" wird automatisch ausgewählt. Verwendete Halbbilder "Beide (Vollbild)" wählen. WDM-Treiber einstellen Registerkarte "WDM" wählen. Der WDM-Treiber "Duerr VistaCam CL Imaging" wird automatisch ausgewählt. Rauschminderung aktivieren/deaktiveren. Wenn die Rauschminderung aktiviert ist, werden bei jeder Aufnahme die eingestellte Anzahl Bilder nacheinander aufgenommen. Aus diesen Bildern wird ein neues Bild berechnet, in dem Störungen weitestgehend ausgeglichen sind. 2 / 6
3 2.2 Konfiguration in VistaCamConfig einstellen VistaCamConfig über Start > Alle Programme > Duerr Dental > VistaCamConfig starten. Die Kamera wird automatisch erkannt und aktiviert. Kamera und Konfiguration testen Registerkarte "Testen" wählen. Einstellungen ändern Registerkarte "Einstellungen" wählen. Anzeige WDM-Treiber Erweiterte Einstellungen LED-Intensitätskonfiguration Basisstation Anschluss Konfiguration Handauslösung Optimale Werte sind bei der Installation automatisch eingetragen. Optimale Einstellungen sind bei der Installation automatisch eingetragen. Leuchtstärke der LEDs, bei VistaCam CL.iX nicht einstellbar Bei Mehrplatzbetrieb oder bei Funküberschneidungen (z. B. durch Funkfußschalter) können Sie den Kanal der Kamera und des Funkfußschalters einstellen (siehe auch Gebrauchsanweisung VistaCam CL.iX ). Quellen für Funktionsauslösung der Kamera Die Handauslösung ist vom Werk aus auf Standardwerte eingestellt und kann nicht verändert werden Auf "Bild aufnehmen" klicken. VistaEasyView startet. Bild mit der Kamera aufnehmen. VistaEasyView schließen. Um die Bilddatei zu prüfen, auf "Bilddatei anzeigen" klicken. Konfiguration speichern Auf "Konfiguration schließen" klicken. Die Konfiguration ist gespeichert. Das Fenster schließt sich. 3 Elektrische Sicherheitsprüfung Elektrische Sicherheitsprüfung nach Landesvorschriften durchführen (z. B. Patientenableitstrom messen). Ergebnisse dokumentieren. Um die Konfiguration zu ändern, auf Einstellungen ändern. klicken. Um Konfiguration zu speichern, auf klicken. Um die Änderung der Konfiguration abzubrechen, auf klicken. DÜRR DENTAL AG Höpfigheimer Strasse Bietigheim-Bissingen, Germany 2011/09/26 3 / /01
4 EN Installation and configuration instructions VistaCam CL.iX Only trained experts may position and install the appliance and start it up for the first time. Minimum system requirements Imaging program Computer system DBSWIN or VistaEasy by Dürr Dental Third-party software on request See "System requirements for computer systems for imaging" ( /01) 1 Installation Only connect the basis station to the computer when the installation wizard prompts you to do so. Close all programs. Insert the supplied DBSWIN DVD (from Version 5.1) into the DVD drive. The start screen appears. If the DVD does not start to play automatically, execute the file "CD_Start. exe". Select the required language. Open the "Driver" tab. 2.1 Setting up the configuration in DBSWIN Start DBSWIN. Choose Options > Show configuration from the menu. Click the "Modules" button. Double-click "Video". The "Video Properties" window opens. Setting up image export Go to the "Settings" tab. Click "Duerr Dental Driver Installation". Confirm the message with "OK". The "Dürr Dental Driver Setup" installation wizard opens. Follow the instructions of the installation wizard. When the wizard asks you to connect or disconnect the camera to/from the computer, do so. 2 Configuration The configuration differs depending on the imaging program used: - DBSWIN: See "2.1 - Setting up the configuration in DBSWIN" (additional settings can be made in VistaCamConfig) - VistaEasy and third-party software (e.g. Sidexis): See "2.2 - Setting up the configuration in VistaCamConfig Activate/deactivate "Autoexport images". Each image is automatically copied to a defined path. The path, file format, and other settings can be made in the light table module. 4 / 6
5 Adjust basis station Go to the "basis station" tab. Setting pressure sensitive release Go to the "Pressure sensitive release" tab. The basis station will automatically be detected and recognised. The COM- Port will be displayed. When more than one treatment unit (i.e. chair) is served or if radio transmission interference is experienced (e.g. from radio-operated foot pedal) the channel can be adjusted. Choose the channel which has been set on the handpiece under Camera channel (see also the VistaCam CL.iX Operating Instructions, ). Select the channel for the radio-operated foot pedal under "Foot pedal channel". Activate or deactivate the source of the function release as required. Check that the connection to the COM-Port of the basis station is matched (see setting the basis station). The manual release is factory set to standard values and can not be changed. Saving the configuration Click "Apply". Click "OK". The window closes automatically. Setting the video source Two cameras can be connected up. If you are only connecting up one camera, make the settings on the "Video source 1" tab. If you are connecting up two cameras, make the settings for the second camera on the "Video source 2" tab. Open the "Video source 1" or "Video source 2" tab. The WDM driver is selected automatically. In "Use half-frames", select "Both (full frame)". Setting the WDM driver Go to the "WDM" tab. The WDM-driver "Duerr VistaCam CL Imaging" will automatically be selected. Activate/deactivate noise reduction. If noise reduction is active, the set number of images are captured one after the other for each imaging operation. The system uses these images to generate a new image that eliminates interference to the greatest extent possible. 5 / 6
6 2.2 Setting up the configuration in VistaCamConfig Open VistaCamConfig by choosing Start > All Programs > Duerr Dental > VistaCamConfig. The camera is automatically detected and activated. Testing the camera and configuration Go to the "Test" tab. Changing settings Go to the "Settings" tab. Display WDM driver The best possible values are automatically entered here during the installation. The best possible values are automatically entered here during the installation. Click "Take picture". VistaEasyView starts up. Capture an image with the camera. Close VistaEasyView. To check the image file, click "View image file". Saving the configuration Click "Close configuration". The configuration is saved. The window closes. Advanced settings LED intensity configuration Basis station Connection Configuration Manual operation Light intensity of LEDs, can not be altered for Vista- Cam CL.iX Where more than one treatment unit (i.e. chair) is served or where radio transmission interference is experienced (e.g. from radio-operated foot pedal) then the channels for the camera and the see can be adjusted (see also VistaCam CL.iX Operating Instructions, ). Source os camera function activation The manual release is factory set to standard values and can not be changed. 3 Electrical safety test Carry out an electrical safety test in accordance with national and local regulations (e.g. measure the leakage current for the patient). Record the results. To change the configuration, click. Change the settings. To save the configuration, click. To cancel the changes to the configuration, click. DÜRR DENTAL AG Höpfigheimer Strasse Bietigheim-Bissingen, Germany 2011/09/26 6 / /01
Softwareupdate-Anleitung // Porty L 600 / Porty L 1200
Softwareupdate-Anleitung // Porty L 600 / Porty L 1200 1 Softwareupdate-Anleitung // Porty L 600 / Porty L 1200 HENSEL-VISIT GmbH & Co. KG Robert-Bunsen-Str. 3 D-97076 Würzburg-Lengfeld GERMANY Tel./Phone:
MehrUSB -> Seriell Adapterkabel Benutzerhandbuch
USB -> Seriell Adapterkabel Benutzerhandbuch 1. Produkt Eigenschaften 1 2. System Vorraussetzungen 1 3. Treiber Installation (Alle Windows Systeme) 1 4. Den COM Port ändern 2 5. Einstellen eines RS232
MehrPeakTech Zeitprogramm erstellen über Excel - Beispiel / Timed programs with Excel Example
PeakTech 6180 Zeitprogramm erstellen über Excel - Beispiel / Timed programs with Excel Example 1. Excel Datei erstellen / Create Excel file Öffnen Sie Excel und erstellen eine xls-datei unter einem beliebigen
MehrSoftwareupdate-Anleitung // AC Porty L Netzteileinschub
1 Softwareupdate-Anleitung // AC Porty L Netzteileinschub Softwareupdate-Anleitung // AC Porty L Netzteileinschub HENSEL-VISIT GmbH & Co. KG Robert-Bunsen-Str. 3 D-97076 Würzburg-Lengfeld GERMANY Tel./Phone:
MehrWord-CRM-Upload-Button. User manual
Word-CRM-Upload-Button User manual Word-CRM-Upload for MS CRM 2011 Content 1. Preface... 3 2. Installation... 4 2.1. Requirements... 4 2.1.1. Clients... 4 2.2. Installation guidelines... 5 2.2.1. Client...
MehrSETUP TOOL. Bedienungsanleitung User s Manual
Bedienungsanleitung User s Manual Bitte lesen Sie diese Anleitung vor der Inbetriebnahme sorgfältig durch Please read the instructions carefully before use 1. Eigenschaften Das Setup Tool ist ein speziell
MehrAnleitung zur Verwendung des Update-Tools für
English version see below (page 10) Anleitung zur Verwendung des Update-Tools für - KW DDC Steuergeräte - KW DDC WLAN Module - KW DLC Steuergeräte - KW DLC WLAN Module Bitte beachten Sie: jedes Steuergerät
MehrCameraserver mini. commissioning. Ihre Vision ist unsere Aufgabe
Cameraserver mini commissioning Page 1 Cameraserver - commissioning Contents 1. Plug IN... 3 2. Turn ON... 3 3. Network configuration... 4 4. Client-Installation... 6 4.1 Desktop Client... 6 4.2 Silverlight
MehrDer Adapter Z250I / Z270I lässt sich auf folgenden Betriebssystemen installieren:
Installationshinweise Z250I / Z270I Adapter IR USB Installation hints Z250I / Z270I Adapter IR USB 06/07 (Laden Sie den Treiber vom WEB, entpacken Sie ihn in ein leeres Verzeichnis und geben Sie dieses
MehrBedienungsanleitung / Manual : LED-Nixie
Bedienungsanleitung / Manual : LED-Nixie English please see below. Bei Neustart und gleichzeitig gedrückter Taste während der Versionsanzeige (halten bis Beep hörbar), erfolgt eine Zurücksetzung auf (Standard)
MehrInstallations- und Konfigurationsanleitung
Installations- und Konfigurationsanleitung DE VistaRay 7 Nur ausgebildete Fachkräfte oder von Dürr Dental geschultes Personal dürfen das Gerät aufstellen, installieren und in Betrieb nehmen. Mindestanforderungen
MehrEMCO Installationsanleitung / Installation instructions
EMCO Installationsanleitung / Installation instructions Installationsanleitung Installation instructions Digitalanzeige digital display C40, FB450 L, FB600 L, EM 14D/17D/20D Ausgabe / Edition B 2012-03
MehrBenutzerhandbuch / User s Manual RUPS 2000 / -B1
RUPS 2000 / RUPS 2000-B1 Benutzerhandbuch / User s Manual RUPS 2000 / -B1 Deutsch English Benutzerhandbuch RUPS 2000 / RUPS 2000-B1 Deutsch In diesem Benutzerhandbuch finden Sie eine Kurzanleitung zu Installation
MehrInstallation/setup notes
Installation/setup notes Notes applicable for the software: stute.x1d Loudspeaker Designer stute.x1a Audio Analyzer stute.scpi SCPI controller DCX.Server Install/Test our software for free (Demo) Download
MehrFunktionsbeschreibung/ Montageanweisung Steuermodul DSM 400 für Dunstabzugshaube DA 6000 W
Funktionsbeschreibung/ Montageanweisung Steuermodul DSM 400 für Dunstabzugshaube DA 6000 W Operation/Installation Control module DSM 400 for Cooker Hood DA 6000 W de, en M.-Nr. 09 165 660 Inhalt/Contents
MehrInstallation Manual. Driver Installation USB-to-Serial Adapter WE2111. A en/de
Installation Manual English Deutsch Driver Installation USB-to-Serial Adapter WE2111 A4012-1.0 en/de USB-to-Serial Adapter English 2 A4012-1.0 en/de USB-to-Serial Adapter 1 Installation in Windows 7...
MehrG-FLASH OBD-TOOL ANLEITUNG FÜR BMW & AMG-MODELLE INSTALLATIONSSOFTWARE & VORBEREITUNG
INSTALLATIONSSOFTWARE & VORBEREITUNG 1. Laden Sie die Installationssoftware für das G-POWER G-Flash OBD-Tool von diesem Link https://tinyurl.com/mygeniusclient auf Ihren Laptop / PC herunter und führen
MehrProduktinformation _185PNdeen
Produktinformation 201407_185PNdeen Solldaten-UPGRADE Juli 2014 WA 900 / 920 / 020 / 950 / 970 CURA S 800 / 860 / 060 / 900 / 960 WAB01 / WAB 02 CCT CURA R1200 / CURA R2000/ API R2000 BOSCH FWA 51x Auf
MehrInstallation und Einrichtung unter Windows 7/8/10. Installation and configuration for Windows 7/8/10
AFS-Client Installation und Einrichtung unter Windows 7/8/10 Installation and configuration for Windows 7/8/10 18.04.2018 kim.uni-hohenheim.de kim@uni-hohenheim.de Bitte sowohl diese Anleitung als auch
MehrDurametric. Installations Anleitung Quick Installation Guide. Deutsch: Seite 2 bis 3. English: Page 4 to 5. ww.fvd.de
Durametric Quick Installation Guide Deutsch: Seite 2 bis 3 English: Page 4 to 5 w 2 Systemvoraussetzungen: Windows 7 / XP / Vista, (32- und 64-bit) - mind. 1.8GHz Dual Core Prozessor - 1 GB Arbeitsspeicher
MehrSensoDirect 150. Lovibond Water Testing. Data Retrieve Software SW E2005. Tintometer Group. ph/orp DO CD/TDS. Bedienungsanleitung. Instruction Manual
Lovibond Water Testing Tintometer Group SensoDirect 150 Data Retrieve Software SW E2005 DE GB Bedienungsanleitung Seite 2 5 Instruction Manual Page 5 7 CD/TDS ph/orp DO www.lovibond.com DE Inhaltsverzeichnis
MehrNEWSLETTER. FileDirector Version 2.5 Novelties. Filing system designer. Filing system in WinClient
Filing system designer FileDirector Version 2.5 Novelties FileDirector offers an easy way to design the filing system in WinClient. The filing system provides an Explorer-like structure in WinClient. The
MehrAnleitung zur Schnellinstallation TU3-S
Anleitung zur Schnellinstallation TU3-S25 1.01 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation der Hardware 2 3. Zugriff auf die Speichergeräte im TU3-S25 4 Troubleshooting 5 Version
MehrInformationen zur Verwendung des TFE-Portals / Information for Using the TFE portal
Informationen zur Verwendung des TFE-Portals / Information for Using the TFE portal Inhalt / Content Vorraussetzungen für Java Web Start /... 3 Prerequisited for Java-WebStart... 3 Datenempfang /... 3
MehrJTAGMaps Quick Installation Guide
Index Index... 1 ENGLISH... 2 Introduction... 2 Requirements... 2 1. Installation... 3 2. Open JTAG Maps... 4 3. Request a free JTAG Maps license... 4 4. Pointing to the license file... 5 5. JTAG Maps
MehrTube Analyzer LogViewer 2.3
Tube Analyzer LogViewer 2.3 User Manual Stand: 25.9.2015 Seite 1 von 11 Name Company Date Designed by WKS 28.02.2013 1 st Checker 2 nd Checker Version history Version Author Changes Date 1.0 Created 19.06.2015
MehrTechnische Information
deutsch Software-Update ZAdyn4C 1 Software auf der Speicherkarte speichern Die Software muss auf einer Speicherkarte gespeichert werden. Gehen Sie dazu folgendermaßen vor: " Die ZIP-Datei "D3359Axx" lokal
MehrInstallationshinweise Z501J / Z501K Adapter IrDa USB Installation hints Z501J / Z501K Adapter IrDa USB
Installationshinweise Z501J / Z501K Adapter IrDa USB Installation hints Z501J / Z501K Adapter IrDa USB 1/3.04 (Diese Anleitung ist für die CD geschrieben. Wenn Sie den Treiber vom WEB laden, entpacken
MehrADD ON 1 MediBalance Pro-Software muss installiert sein. must be installed.
Befundung und Training Test and Training ADD ON 1 MediBalance Pro-Software muss installiert sein. must be installed. Gleichgewicht / Balance Schwindeltraining / vertigo training Koordination / Coordination
MehrUSB RS232 Converter IMPAC-Zubehör
USB 2.0 - RS232 Converter IMPAC-Zubehör Installation Anleitung / Manual IMPAC - Spezialist für berührungslose Temperaturmessung IMPAC - Specialist in non-contact thermometry USB 2.0 RS232-Konverter, aktiv,
MehrSpecial Documentation Activation Instructions
SD02058S/04/A2/01.17 71367354 Products Solutions Services Special Documentation Activation Instructions Aktivierungsanleitung DeviceCare SFE100 Lizenzmodell (Aktivierungsanleitung) Activation Instructions
Mehriid software tools QuickStartGuide iid USB base driver installation
iid software tools QuickStartGuide iid software tools USB base driver installation microsensys Nov 2016 Introduction / Einleitung This document describes in short form installation of the microsensys USB
Mehrv i r t u A L C O M P o r t s
v i r t u A L C O M P o r t s (HO720 / HO730) Installieren und Einstellen Installation and Settings Deutsch / English Installieren und Einstellen des virtuellen COM Ports (HO720 / HO730) Einleitung Laden
MehrQuick Installation Guide
LevelOne WHG-1000 300Mbps Wireless PoE Hotspot Gateway Quick Installation Guide English Deutsch Table of Contents English... 3 Deutsch... 13 Default Settings IP Address-LAN1 192.168.1.254 IP Address-LAN2
MehrTravelPilot 55/65 Active Connect. Bluetooth TELEFONMENÜ /TELEPHONE MENU
TravelPilot 55/65 Active Connect Bluetooth TELEFONMENÜ /TELEPHONE MENU Inhaltsverzeichnis / Table of content 3-10 DE 11-18 EN 2 Bluetooth Telefonmenü DE 3 Start Um Ihr Mobiltelefon zusammen mit Ihrem TravelPilot
MehrMonitor VIS 3xx Kurzanleitung
Monitor VIS 3xx Kurzanleitung 19.08.08 Art. Nr. 22261 Inhalt: 1. Spezifikationen...2 2. Tastenfunktionen...2 3. Menüführung und Einstellungen...3 Technik nach Maß Wöhler Monitor VIS 3xx 1. Spezifikationen
MehrUmstellung eines Outlook Kontos von ActiveSync zu IMAP. Changing an Outlook account from ActiveSync to IMAP
Outlook 2013/2016 Umstellung eines Outlook Kontos von ActiveSync zu IMAP Changing an Outlook account from ActiveSync to IMAP 18.04.2018 kim.uni-hohenheim.de kim@uni-hohenheim.de Diese Anleitung beschreibt
MehrCABLE TESTER. Manual DN-14003
CABLE TESTER Manual DN-14003 Note: Please read and learn safety instructions before use or maintain the equipment This cable tester can t test any electrified product. 9V reduplicated battery is used in
MehrApplication Note. Import Jinx! Scenes into the DMX-Configurator
Application Note Import Jinx! Scenes into the DMX-Configurator Import Jinx! Scenen into the DMX-Configurator 2 The Freeware Jinx! is an user friendly, well understandable software and furthermore equipped
MehrQuick Installation Guide for 4 and 7-Port Broadband Router
Quick Installation Guide for 4 and 7-Port Broadband Router A. Hardware Installation 1. Setup LAN connection: connect an Ethernet cable from your computer s Ethernet port to one of the LAN ports of this
MehrSOUND LINK ANALYSIS SOFTWARE BEDIENUNGSANLEITUNG USER MANUAL. Für weiteren Gebrauch aufbewahren! Keep this manual for future needs!
BEDIENUNGSANLEITUNG USER MANUAL SOUND LINK ANALYSIS SOFTWARE Für weiteren Gebrauch aufbewahren! Keep this manual for future needs! Copyright Nachdruck verboten! Reproduction prohibited! Inhaltsverzeichnis/
MehrBLK-2000. Quick Installation Guide. English. Deutsch
BLK-2000 Quick Installation Guide English Deutsch This guide covers only the most common situations. All detail information is described in the user s manual. English BLK-2000 Quick Installation Guide
MehrElectrical tests on Bosch unit injectors
Valid for Bosch unit injectors with order numbers 0 414 700 / 0 414 701 / 0 414 702 Parts Kit Magnet*: - F00H.N37.925 - F00H.N37.933 - F00H.N37.934 * For allocation to the 10-place Bosch order number,
MehrAnleitung zur Schnellinstallation TU3-SA 1.01
Anleitung zur Schnellinstallation TU3-SA 1.01 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation der Hardware 2 3. Zugriff auf die Festplatten des TU3-SA 4 Troubleshooting 5 Version 02.15.2011
MehrMANUAL_EN ANLEITUNG_DE PHONE SUITE SYNCHRONISATION SOFTWARE
MANUAL_EN ANLEITUNG_DE PHONE SUITE SYNCHRONISATION SOFTWARE 2 PHONE SUITE MANUAL PHONE SUITE MANUAL 3 RESERVATION Technical Data is subject to change without notice. Changes, errors and misprints may not
MehrNTP Synchronisierung NTP Synchronizer
Q-App: NTP Synchronisierung NTP Synchronizer Q-App zur automatischen Datums und Zeitsynchronisierung Q-App for automatic date and time synchronization Beschreibung Der Workflow hat 2 Ebenen eine Administratoren-
MehrInstallation and update of the Schiebel SmartTool2. Installation und Update des Schiebel SmartTool2
Installation and update of the Schiebel SmartTool2 Installation und Update des Schiebel SmartTool2 KD_Installation_SmartTool2_en_de_Customer_documentation 20181018.docx VA: 18.10.2018 Page 1 of 7 1 English
MehrHama GmbH & Co KG Postfach Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/
www.hama.de Hama GmbH & Co KG Postfach 80 86651 Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/502-274 hama@hama.de www.hama.de 00062249-05.05 Multimedia Kit für/for Mercedes Command 2.0 00062249
Mehrmobilcom-debitel SmartHome Schnell-Start-Anleitung Quick Start Guide
mobilcom-debitel SmartHome Schnell-Start-Anleitung Quick Start Guide 1. Cube anschließen 1. Connect Cube n Schließen Sie den Cube an die Stromversorgung an. n Legen Sie die Batterien polungsrichtig in
MehrOrder Ansicht Inhalt
Order Ansicht Inhalt Order Ansicht... 1 Inhalt... 1 Scope... 2 Orderansicht... 3 Orderelemente... 4 P1_CHANG_CH1... 6 Function: fc_ins_order... 7 Plug In... 8 Quelle:... 8 Anleitung:... 8 Plug In Installation:...
Mehrp^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
MehrSnom 3xx/7xx Serie. Manuelle Neukonfiguration. Dokumentenversion 1.0
Snom 3xx/7xx Serie Manuelle Neukonfiguration Dokumentenversion 1.0 Snom 3xx/7xx Serie Mauelle Neukonfiguration Copyright Hinweis Copyright 2016 finocom AG Alle Rechte vorbehalten. Jegliche technische Dokumentation,
Mehryasxtouch Firmware Update
Inhaltsverzeichnis /Content Inhalt Inhaltsverzeichnis /Content... 1 1. Funktionsweise / Functionality... 2 2. Speichern der Einstellungen / Backup Settings... 2 2.1 Anmelden am Serveradmin / Login Serveradmin...
MehrFEBE Die Frontend-Backend-Lösung für Excel
FEBE Die Frontend--Lösung für FEBE Die Frontend--Lösung für FEBE.pptx 8.04.206 0:43 FEBE Die Frontend--Lösung für Nutzer A alle_aufträge neuer_auftrag Auftragsänderung Nutzer B alle_aufträge neuer_auftrag
MehrGamperl & Hatlapa GmbH Modem/WiFi settings
1. Log in - Anmelden Pic001 device front / Gerätevorderseite Pic002 Login screen / Anmeldebildschirm Connect your computer to one of the Ethernetports on the front (Pic001) of the modem. Start your browser
MehrAndroid APP NVR Viewer
Android APP NVR Viewer User Manual DN-16111 DN-16112 DN16113 2 DN-16111, DN-16112, DN-16113 for Android User Manual Table of Contents Download the APP... 3 Running the app - Add NVR... 3 Running the app
MehrElectrical testing of Bosch common rail solenoid valve (MV) injectors
Applies to MV injector, generation: -CRI 1.0 / 2.0 / 2.1 / 2.2 -CRIN 1 / 2 / 3, with K oder AK plug Bosch 10-position order number Bosch-Bestellnummer CRI: 0 445 110 xxx Bosch-Bestellnummer CRIN: 0 445
MehrMonitor & Camera Upgrading Procedure for Ctronics 9 Touch
English VERSION: Monitor & Camera Upgrading Procedure for Ctronics 9 Touch Screen Home Surveillance System CTNK-W02C *LINK:http://www.ctronicssecuritycameras.com/shop/4ch-nvr-system/touch-screenctronics-
Mehrp^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= How to Disable User Account Control (UAC) in Windows Vista You are attempting to install or uninstall ACT! when Windows does not allow you access to needed files or folders.
MehrQuick Guide Home Network Mode
Quick Guide Home Network Mode English > 1 German > 3 About the Home Network Mode EN Tivizen Nano & iplug normally work on their own created networks (whose SSID starts with tivizentv or iplug ) in which
MehrElectrical testing of Bosch common rail piezo injectors
Applies to generation CRI 3: Bosch 10-position order number 0 445 115 = CRI 3-16 (CRI 3.0) 1600 bar 0 445 116 = CRI 3-18 (CRI 3.2) 1800 bar 0 445 117 = CRI 3-20 (CRI 3.3) 2000 bar Tools required: Hybrid
MehrHow-To-Do. Communication to Siemens OPC Server via Ethernet
How-To-Do Communication to Siemens OPC Server via Content 1 General... 2 1.1 Information... 2 1.2 Reference... 2 2 Configuration of the PC Station... 3 2.1 Create a new Project... 3 2.2 Insert the PC Station...
MehrUSB Treiber updaten unter Windows 7/Vista
USB Treiber updaten unter Windows 7/Vista Hinweis: Für den Downloader ist momentan keine 64 Bit Version erhältlich. Der Downloader ist nur kompatibel mit 32 Bit Versionen von Windows 7/Vista. Für den Einsatz
MehrAL15. Data Logger/Acquisition Software. Bedienungsanleitung. Instruction Manual. ph/orp DO CD/TDS. Seite 2 5. Page 6 8
AL15 Data Logger/Acquisition Software DE GB Bedienungsanleitung Seite 2 5 Instruction Manual Page 6 8 CD/TDS ph/orp DO DE Inhaltsverzeichnis 1. Allgemeine Beschreibung... 3 2. Softwareinstallation... 3
MehrAnleitung zur Schnellinstallation TFM-561U
Anleitung zur Schnellinstallation TFM-561U V1 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 5 Version 08.25.2010 1. Bevor Sie anfangen Packungsinhalt TFM-561U Treiber
MehrKurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen
Kurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen QuickStart Guide to read a transponder with a scemtec TT reader and software UniDemo Voraussetzung: - PC mit der
MehrHow-To-Do. Hardware Configuration of the CC03 via SIMATIC Manager from Siemens
How-To-Do Hardware Configuration of the CC03 via SIMATIC Manager from Siemens Content Hardware Configuration of the CC03 via SIMATIC Manager from Siemens... 1 1 General... 2 1.1 Information... 2 1.2 Reference...
MehrUNIGATE CL Konfiguration mit WINGATE
UNIGATE CL Konfiguration mit WINGATE - UNIGATE CL Configuration via WINGATE Art.-Nr.: V3928 Deutschmann Automation GmbH & Co. KG Carl-Zeiss-Str. 8 D-65520 Bad Camberg Phone: +49-(0)6434-9433-0 Hotline:
MehrTechnische Information. Toolset Software und Cosworth Geräte
Technische Information Technical Information 07/2014 911 GT3 Cup (991) Toolset Software und Cosworth Geräte Toolset software and Cosworth devices Fahrzeug / Vehicle: 911 GT3 Cup (991) Bauteil / Part: ICD
MehrLevelOne. Quick Installation Guide. EAP series Enterprise Access Point. Default Settings. IP Address
LevelOne EAP series Enterprise Access Point Quick Installation Guide English Deutsch Default Settings IP Address 192.168.1.1 Username admin Password admin Figure 1-1 Figure 1-2 Figure 1-3 2 Figure 2-1
MehrData exchange with Prosonic Flow 93T
Supplementary documentation for the Operating Instructions Data exchange with Prosonic Flow 93T Import CSV File into Excel A0013675 Prosonic Flow 93T uses a text file format commonly referred to as a CSV
MehrLatest Information. Print Server with advanced IPv6 Functionality
Latest Information Print Server with advanced IPv6 Functionality In order to offer you maximum quality, our products are continually being improved. Your print server is one of the first products to be
MehrLimbLogic Communicator. Clever verbunden. Software Installation
LimbLogic Communicator Clever verbunden. Software Installation DE LimbLogic Communicator Software Installation Schließen Sie den Communicator nicht an den PC an, bis Sie dazu aufgefordert werden. Hardware-
MehrEMCO Installationsanleitung Installation instructions
EMCO Installationsanleitung Installation instructions Installationsanleitung Installation instructions Digitalanzeige digital display C40, FB450 L, FB600 L, EM 14D/17D/20D Ausgabe Edition A 2009-12 Deutsch...2
MehrParameter-Updatesoftware PF-12 Plus
Parameter-Updatesoftware PF-12 Plus Mai / May 2015 Inhalt 1. Durchführung des Parameter-Updates... 2 2. Kontakt... 6 Content 1. Performance of the parameter-update... 4 2. Contact... 6 1. Durchführung
MehrSoftware BC Flash. Firmware für VAS 5903 / 5905 aktualisieren. Software BC Flash. Update Firmware for VAS 5903 / 5905. Bedienungsanleitung Software
Software BC Flash Firmware für VAS 5903 / 5905 aktualisieren Software BC Flash Update Firmware for VAS 5903 / 5905 D GB Bedienungsanleitung Software Operating Instructions Software 42,0410,1534 012008
MehrKASSENBUCH 2017 INSTALLATIONSHILFE. Falscherkennung Norton Antivirus. EntekSystems GmbH VERSION
KASSENBUCH 2017 INSTALLATIONSHILFE Falscherkennung Norton Antivirus VERSION 1.0 01.11.2017 support@enteksystems.de Kassenbuch2017 Support Großmannstraße 17 63808 Haibach Amtsgericht Aschaffenburg HRB 13797
MehrInstallation Guide/ Installationsanleitung. Spring 16 Release
Guide/ Installationsanleitung Spring 16 Release Visit AppExchange (appexchange.salesforce.com) and go to the CONNECT for XING listing. Login with your Salesforce.com user is required. Click on Get It Now.
MehrCan I use an older device with a new GSD file? It is always the best to use the latest GSD file since this is downward compatible to older versions.
EUCHNER GmbH + Co. KG Postfach 10 01 52 D-70745 Leinfelden-Echterdingen MGB PROFINET You will require the corresponding GSD file in GSDML format in order to integrate the MGB system: GSDML-Vx.x-EUCHNER-MGB_xxxxxx-YYYYMMDD.xml
MehrInstallation und Start der Software AQ2sp Installation and Start of the software AQ2sp
Installation and Start of the software Abhängig von Ihrer WINDOWS-Version benötigen Sie Administrator-Rechte zur Installation dieser Software. Geeignet für folgende WINDOWS-Versionen: Windows 98 SE Windows
MehrRS-232 SERIAL EXPRESS CARD 1-PORT. Expansion 111829
RS-232 SERIAL EXPRESS CARD 1-PORT Expansion 111829 1. Introduction equip RS-232 Serial Express Card works with various types of RS-232 serial devices including modems, switches, PDAs, label printers, bar
MehrReadme-USB DIGSI V 4.82
DIGSI V 4.82 Sehr geehrter Kunde, der USB-Treiber für SIPROTEC-Geräte erlaubt Ihnen, mit den SIPROTEC Geräten 7SJ80/7SK80 über USB zu kommunizieren. Zur Installation oder Aktualisierung des USB-Treibers
MehrAnleitung zur Schnellinstallation TEW-623PI 3.02
Anleitung zur Schnellinstallation TEW-623PI 3.02 Table of Contents Deutsch 1 1. Bevor Sie anfangen 2. Installation 1 2 3. Verwendung des drahtlosen Adapters 4 Troubleshooting 5 Version 02.05.2010 1. Bevor
MehrNVR Mobile Viewer for iphone/ipad/ipod Touch
NVR Mobile Viewer for iphone/ipad/ipod Touch Quick Installation Guide DN-16111 DN-16112 DN16113 2 DN-16111, DN-16112, DN-16113 for Mobile ios Quick Guide Table of Contents Download and Install the App...
MehrCB RADIO Service Manual AE 6890
CB RADIO Service Manual AE 6890 Downloaded from www.cbradio.nl Technische Mitteilung zu AE 6890 Problem: Bei Montage einer schlecht geerdeten Antenne oder einer Antenne mit schlechtem SWR sehr nahe am
MehrUCON UCON Kurzanleitung Inbetriebnahme
UCON UCON Kurzanleitung Inbetriebnahme copyright G&D 24/08/2005 Irrum und techn. Änderungen vorbehalten 1. Was Sie zur Installation benötigen - UCON - 1:1 belegtes CAT-x Patchkabel - Kaltgerätekabel -
MehrEINBAUHINWEISE INSTALLATION INSTRUCTIONS
EINBAUHINWEISE INSTALLATION INSTRUCTIONS FÜR JEDEN ANSPRUCH DAS RICHTIGE FAHRWERK. KW automotive GmbH Aspachweg 14 74427 Fichtenberg Telefon: +49 7971 9630-0 Telefax: +49 7971 9630-191 www.kwsuspensions.de
MehrEvaluation Kit Engineer 2.0
Kurzanleitung Funk-Schnappschalter Funk-Wippschalter Volumenmodell-Generator Empfänger USB-Kabel Atennenhülse Bitte lesen Sie vor der Inbetriebnahme unbedingt die beiliegende Kurzanleitung Erste Schritte
MehrMANUAL_EN ANLEITUNG_DE QSYNC OUTLOOK SYNCHRONISATION SOFTWARE
MANUAL_ ANLEITUNG_DE QSYNC OUTLOOK SYNCHRONISATION SOFTWARE 2 TITEL DES KAPITELS TITEL DES KAPITELS 3 RESERVATION Technical Data is subject to change without notice. Changes, errors and misprints may not
MehrI am starting on Page 4 and assuming that the person has DECODERPROGGRAMMER manual.
I am starting on Page 4 and assuming that the person has DECODERPROGGRAMMER manual. If you already use the Digital Plus USB interface: Before you install the software for the decoder programmer, back up
MehrSensoDirect 150. Lovibond Water Testing. Data Logger/Acquisition Software. Tintometer Group. ph/orp DO CD/TDS. Bedienungsanleitung. Instruction Manual
Lovibond Water Testing Tintometer Group SensoDirect 150 Data Logger/Acquisition Software DE GB Bedienungsanleitung Seite 2 5 Instruction Manual Page 6 8 CD/TDS ph/orp DO www.lovibond.com DE Inhaltsverzeichnis
MehrVGM. VGM information. HAMBURG SÜD VGM WEB PORTAL USER GUIDE June 2016
Overview The Hamburg Süd VGM Web portal is an application that enables you to submit VGM information directly to Hamburg Süd via our e-portal Web page. You can choose to enter VGM information directly,
MehrQuick manual: iphone_vpn
Quick manual: iphone_vpn Rechenzentrum Garching der Max-Planck-Gesellschaft Klicken Sie auf den runden Knopf und wählen Sie anschließend im Menü Einstellungen aus. Click onto the round button and then
MehrBedienungsanleitung USB-Capture-Box PV-321C
Bedienungsanleitung USB-Capture-Box PV-321C Systemanforderungen: Windows 98 oder 2000 Pentium 2 oder höher 64 MB DRAM 2x CD ROM-Laufwerk PCI/AGP VGA-Karte & Monitor Lieferumfang: PV-321C USB Capture Box
MehrCustomer Support Info PP 80x
Driver Installation Open: Control Panel\Hardware and Sound\Devices and Printers Windows Treiber Installation Öffnen Ordner: Geräte und Drucker Add printer Drucker hinzufügen Add a local printer Choose
MehrGuidance Notes for the eservice 'Marketing Authorisation & Lifecycle Management of Medicines' Contents
Guidance Notes for the eservice 'Marketing Authorisation & Lifecycle Management of Medicines' Contents Login... 2 No active procedure at the moment... 3 'Active' procedure... 4 New communication (procedure
MehrDVR / QuickQuide Adroid
DVR 351.154/351.155 QuickQuide Adroid INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG ENGLISH Setup IP-Camviewer Lite on IOS. 351.154 and 351.155. Start with searching the right app IP-camviewer
MehrExercise (Part XI) Anastasia Mochalova, Lehrstuhl für ABWL und Wirtschaftsinformatik, Kath. Universität Eichstätt-Ingolstadt 1
Exercise (Part XI) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
MehrSanStore: Kurzanleitung / SanStore: Quick reference guide
SanStore Rekorder der Serie MM, MMX, HM und HMX Datenwiedergabe und Backup Datenwiedergabe 1. Drücken Sie die Time Search-Taste auf der Fernbedienung. Hinweis: Falls Sie nach einem Administrator-Passwort
MehrVGM. VGM information. HAMBURG SÜD VGM WEB PORTAL - USER GUIDE June 2016
Overview The Hamburg Süd VGM-Portal is an application which enables to submit VGM information directly to Hamburg Süd via our e-portal web page. You can choose to insert VGM information directly, or download
Mehr