FK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend
|
|
- Claudia Thomas
- vor 7 Jahren
- Abrufe
Transkript
1 Ball Valves Nr. FKKugelhahn nach DIN 7, BS 1, ASME B.4 metallisch dichtend mit Flanschanschluss PN 10 PN oder ASME Class bzw. Class 00, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerte Kugel, hochverschleißfestes metallisches Dichtsystem, ausblassichere Schaltwelle, mit antistatischer Ableitung, Totraumentlastung, Fire Safe gemäß BS 6 Teil, TALuft geprüft, Aufbauflansch für Antriebe gemäß DIN ISO 11, Betätigung mit Handhebel, Schneckengetriebe oder pneumatischem Antrieb, Baulängen nach DIN EN 81 bzw. ASME B.10, API 6 D und BS. Dichtleisten nach DIN 6 Form C bzw. ASME B. RF. FKball valve acc. to DIN 7, BS 1, ASME B.4 metal seated with flanged connection PN 10 PN or ASME Class or Class 00, body in twopiece design, full bore, floating ball, high wear resisting metal seal system, anti blowout stem, antistatic, cavity relief, fire safe acc. to BS 6 part, TALuft tested, with mounting flange for actuator acc. to DIN ISO 11, operation with hand lever, gear box or pneumatic actuator. Facetoface dimension acc. to DIN EN 81 or ASME B.10, API 6 D and BS. Sealing surface acc. to DIN 6 Form C or ASME B, RF. BestellNr. Order No. PN / / Gehäusewerkstoff Body material Edelstähle z.b.: / Stainless steel e.g.: 1.471; 1.44; Hastelloy; Nickel CStähle z.b.: / Carbon steel e.g.: C1; 1.; 1.7; TSTE ; 1. Edelstähle z.b.: / Stainless steel e.g.: /00 lbs Ti; 04L; Hastelloy; Nickel; Monel CStähle z.b.: / Carbon steel e.g.: /00 lbs A ; F1; F; F11; F; LF Ventilsitz nach Krombach Werksbezeichnung Seat material acc. to Krombach code H: Hartchrom / Chromium H: Hartlegierung auf Nickelbasis / Nickel alloy H4: Hartlegierung auf Nickelbasis mit Wolframkarbid / Nickel alloy + carbides H: Hartlegierung auf Cobaltbasis / Cobalt alloy H6: Hartlegierung auf Chromkarbidbasis mit Ni und Cr / Chromcarbides H7: ChromoxidKeramik / Ceramic chromoxid Verfahren Procedures H: Elektrogalvanisch / Electro galvanic H, H4, H: Flammspritzen mit thermischer Nachverdichtung / Plasma spray & fused H6, H7: Hochgeschwindigkeitsflammspritzen / High speed spraying Seite 1 von 6, Stand 04/07
2 Ball Valves Nr. Standardausführung Standard design L h h Handhebel um 0 gedreht gezeichnet Handlever shown in a 0 shifted position h øg n x ød øk ØD L L b f Ausführung mit Schneckengetriebe Design with gear box Getriebe um 0 gedreht gezeichnet Gear box shown in a 0 shifted position Seite von 6, Stand 04/07
3 Ball Valves Nr. DIN voller Durchgang / DIN full bore /" / 1" 1 1/" " " 1/" / 1" 1 1/" " " PN / / 10/ / 10/ / 10/ / 10 Class Class Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm] Gewicht L L0 L h1 h h d1 D k nxd g f b x 4x 4x 4x 4x 4x 4x 8x 8x 8x 8x 8x 8x 8x6 8x 1x 1x6 1x ASME voller Durchgang / ASME full bore Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm] L L0 L h1 h h d1 D k nxd g f b , 8,6,4 10, 8,6 7,4 4,, 6, 7, 8,6 1,7,4 10, 1, 8, 4x,7 4x,7 4x,7 4x,7 4x1,0 4x1,0 8x1,0 8x,4 8x,4,1 4,,8 7,1 1, 7,, 6,7 11, 1,7,, 1,1,,,4 8,4 ASME voller Durchgang / ASME full bore Werkstoffe / Materials Pos. Item Benennung Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm] L L0 L h1 h h d1 D k nxd g f b , 1, 1,,4 1,1, 4, 81 66, 8, 88, 1, 8,1 0,1 6,7 0, 4x,7 4x1 4x1 4x, 8x1 8x, 8x, 1x. 1x,4,1 4,, ,, 6,7,,7,,6, 8,4 1,7 6, 41,1 Gehäuse Flanschteil Schaltkugel Kugeldichtring Federelement Druckring Tellerfeder Stopfbuchsbrille Schaltwelle Lagerring Stopfbuchsring Stützring Gehäusedichtring Stiftschraube Sk.Mutter Sk.Schraube/Stiftschraube Sk.Mutter Druckring Handhebel Blech Zylinderschraube Scheibe Sk.Schraube Designation Body Cover Ball Seat ring Spring element Pressure ring Belleville spring washer Gland Stem Bearing Packing ring Supporting ring Body sealing ring Stud bolt Hex.nut Hex.head screw/stud bolt Hex.nut Pressure ring Hand lever Steel plate Fillister head screw Disc Hex.head screw Werkstoffe / Materials C1 / A / Ti Hastelloy Nickel X6CrNiMoTi beschichtet / Ti Coated X6CrNiMoTi beschichtet / Ti Coated X6CrNiMoTi / Ti Inconel X7 X6CrNiMoTi / Ti X6CrNiMoTi / Ti Hartkohle / Hard coal A4 / A 1 Gr. B8 A4 / A Gr. 8 A4 / A 1 Gr. B8 A4 / A Gr. 8 X6CrNiMoTi C 1.01 / Carbon steel St verzinkt / Zinc coated 8.8 verzinkt / Zinc coated St verzinkt / Zinc coated A4 / A 1 Gr. B8 Weight [kg], 7, 8 10, 1, 1, Gewicht Weight [kg], 7, 7, Gewicht Weight [kg] 6, 8,4, 1 Seite von 6, Stand 04/07
4 Ball Valves Nr. Ausführung mit geschlossener Schaltwellenverlängerung für Tieftemperatureinsatz Design with closed stem extension for cryogenic applications 0 h h8 Standardlänge mm für Hochtemperatureinsatz Standard length mm for high temperature applications Aufbauflansch für Antriebe nach DIN ISO 11 Mounting flange for actuators acc. to DIN ISO 11 ½" ¾" lbs DIN ISO 11 F04 d d4 d d6 h4 h h6 Lk bk SW 0 4 M 7 1 ¾" 00 lbs F0 M6 8 1" F0 M6 8 F07 M8 F07 M8 " F07 M8 ½" F10 10 M10 7 " F10 10 M10 7 F1 8 1 M F 10 1 M F 10 1 M 46 Seite 4 von 6, Stand 04/07
5 Ball Valves Nr. Ermittlung der Drehmomente Das erforderliche Drehmoment wird von folgenden Größen bestimmt: Nennweite () Druckdifferenz ( p) zum Zeitpunkt der Ventilöffnung Art und Eigenschaften des Mediums Zur Ermittlung der Drehmomente müssen die aus dem nebenstehenden Diagramm ermittelten Werte mit dem Faktor FF multipliziert werden. Medium : FF Es ist zu beachten, dass das Öl : 1,0 max. Drehmoment des Antriebes Wasser : 1, das zulässige Drehmoment der Gas :,6 Schaltwelle nicht überschreitet. Determination of torques The determination of the necessary torque depends on the following variables. Nominal size Pressure difference ( p) at the time when the valve opens Nature and characteristics of the fluid To determine the respective torque the values resulting from the diagram have to be multiplied by the factor of influence FF Medium : FF It is important to ensure that the Oil : 1,0 maximum torque of the actuator Water : 1, does not exceed the allowable Gas :,6 torque of the stem. Zulässige p/twerte für drucktragende Teile [bar] Allowable p/tvalues for pressure retaining parts [bar] Material: A: 1.04 B: zulässiges Drehmoment der Schaltwelle [Nm] (Werkstoff 1.471*) Allowable torque of the stem [Nm] (material *) C C 0 C 00 C 0 C ½" 4 4 ¾" 1" " ½" " * andere Werkstoffe möglich / Other materials possible Material: C: ASTM A D: ASTM A Gr. FTi Seite von 6, Stand 04/07
6 Ball Valves Nr. Lieferbare Sonderausführungen: mit Heizmantel mit Schaltwellenverlängerung mit elektrischem, pneumatischem oder hydraulischem Antrieb andere Flanschdichtleisten möglich weitere Nennweiten, Nenndrücke und Werkstoffe auf Anfrage Special designs: With heating jacket With stem extension With electric, pneumatic or hydraulic actuator Other sealing surfaces are possible Further nominal sizes; nominal pressures and materials on request Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib oder Übersetzungsfehler übernehmen wir keine Haftung. The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue. Friedrich Krombach GmbH Armaturenwerke Marburger Straße 64 D7 Kreuztal Telefon + (0) 7/0 Fax + (0) 7/ info@krombach.com Seite 6 von 6, Stand 04/07
FK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend
Ball Valves Nr. 1 FKKugelhahn nach DIN 57, BS 1, ASME B.4 metallisch dichtend mit Flanschanschluss PN 10 PN oder ASME Class bzw. Class 00, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerte
MehrFK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend. FK-ball valve acc. to DIN 3357, BS 5351, ASME B16.
Nr. 1 FKKugelhahn nach DIN 57, BS 1, ASME B.4 metallisch dichtend mit Flanschanschluss PN 10 PN oder ASME Class bzw. Class 00, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerte Kugel,
MehrFlow through sight glasses Nr. 440/450
Flow through sight glasses Nr. 4/450 Durchfluss-Schaugläser in Eckform (Nr. 4) und Dreiwegeform (Nr. 450) mit Flanschanschluss bis Gehäuse in Schweißkonstruktion mit Einlaufstutzen, beiderseits Schauglasplatten
MehrAbsperrschieber Gate valves. Nr Absperrschieber nach DIN Gate valves acc. to DIN 3352
nach DIN 3352 mit Flanschanschluss PN, mit Bügelhaube, steigender Spindel, außenliegendem Spindelgewinde, nichtsteigendem Handrad und kugelgelagerter Bundbuchse. Baulänge nach DIN EN 5581 Grundreihe 15
MehrGate valves Nr
SäureAbsperrschieber nach DIN 52 mit Flanschanschluss 6, mit Bügelaufsatz, steigender Spindel, außenliegendem Spindelgewinde und nicht steigendem Handrad. Baulänge nach DIN EN 5581 Grundreihe 1 (), Grundreihe
MehrWerkstoffe Materials Spindel, Spindelmutter und Stopfbuchsschrauben Stem, stem nut and stuffing box screws
Nr..1 SäureAbsperrschieber nach DIN 52 mit Flanschanschluss, mit Bügelaufsatz, steigender Spindel, außenliegendem Spindelgewinde und nicht steigendem Handrad. Baulänge nach DIN EN 551 Grundreihe (), Grundreihe
MehrBall Valves Nr
Ball Valves Nr. 5 FKKugelhähne nach DIN 57 mit Flanschanschluss PN bis PN, Gehäuse in zweiteiliger Ausführung, voller Durchgang, FiresafeDesign, mit antistatischer Ableitung, Schaltwelle ausblassicher,
MehrPos. Item. DN L H H 1 D d 1 d 2 b n x d 3 d 4
Class 150 Class 150 Ausführung Schieber mit aussenliegender Spindel mit elastischem Keil und steigender Spindel mit Flanschanschluss Baulänge nach ANSI B16.10 DN 2 12 Design Gate valve with outside screw
MehrThrottle valves Nr. 220
Throttle valves Nr. Ringdrosselklappen in anschlagender Ausführung, zum Einklemmen zwischen Flanschen nach DIN 1 PN, DIN PN, DIN PN 1 bzw. nach ASME B 1. CL mit Handhebel, Federfeststellvorrichtung und
MehrBODENABLASS - KUGELHAHN BOTTOM OUTLET BALL VALVE TYP BI 11 TYPE BI 11. Qualität ist unser Antrieb
BODENABLASS - KUGELHAHN BOTTOM OUTLET BALL VALVE Qualität ist unser Antrieb KONSTRUKTIONSMERKMALE Design characteristics 1 Sumpffreier Einbau in den Behälter- Blockflansch 1 Almost sump-free tank bottom
MehrBVA 23 1/4-4. Ku, Ball valve with top flange stainless steel, three-piece body.
Ku, Ball valve with top flange stainless steel, three-piece body BVA 23 1/4-4 E-mail: brno@fluidbohemia.cz http://www.fluidbohemia.cz Copyright by InterApp BVA23 0137 Konstruktion: 1 3-teiliges Gehäuse
MehrSpecification. DESIGN Body consists of 2 part, with replaceable seat; Face to face dimension acc.to EN R20.
Technische Daten BAUFORM 2-teilige Körperkonstruktion mit auswechselbarer Manschette. Baulänge nach EN 558-1 Reihe. BETÄTIGUNG Durch Handrad mit Getriebe, elektr. od. pneu. Stellantrieb. ANSCHLUß Flansch
MehrGusseisen/Cast iron Gusseisen/Cast iron. Gusseisen/Cast iron Gusseisen/Cast iron
Nr. 00 Schmutzfänger in Schrägsitzform mit Flanschanschluss mit auswechselbarem Innensieb aus rost und säurebeständigem Edelstahlgewebe 1.1, ab mit zusätzlichem Stützsieb aus gelochtem Edelstahlblech 1.571.
MehrFSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type
FSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type FSKH mit Abschließvorrichtung und Endschalter FSKH with locking device and position switch (F)SKH SAE (F)SKH SAE Größen: 13 bis 50 Gehäuse:
MehrDesign Quadruple eccentric control valve, body made of steel in welded; disc made of cast steel or steel in welded, metal/metalsealing
Ausführung 4-fach exzentrische Regelklappe, Gehäuse aus Stahl geschweißt, Klappenscheibe aus Stahlguss oder Stahl geschweißt, metalldichtend, Klappenscheibe doppeltexzentrisch gelagert, Sitzgeometrie 4-fach
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrKugelhähne. Split Body
Kugelhähne Split Body > Kugelhähne Split Body Zulassungen und Standards API Spec. 607 American Society for Testing and Materials American Society of Mechanical Enginners National Association of Corrosion
MehrAbsperrventile Globe valves. Nr Absperrventile in Durchgangsform. Globe valves in straight-through type
Nr. 0 Absperrventile in Durchgangsform mit Bügelaufsatz, außenliegendem Spindelgewinde und steigendem Handrad, mit Flanschanschluss nach DIN, Baulänge nach DIN EN 551, Flanschanschlussmaße und Bohrungen
MehrSpecification. DESIGN Swing check valves for return fl ow prevention in piping systems to be mounted directly between fl anges acc. to DIN.
Technische Daten BAUFORM Rückschlagklappen zur Rückfl ussverhinderung in Rohrleitungssystemen für den Einbau zwischen DIN Flanschen. ANSCHLUß Flansch DN32 DN500 bemessen für Flansch nach PN16 BETRIEBSDRUCK
MehrSpecification. FACE TO FACE LENGTH Acc. to EN R20.
Technische Daten BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10/PN16); andere auf Anfrage. BAULÄNGE Nach EN
MehrBODENABLASS - KUGELHAHN BOTTOM OUTLET BALL VALVE TYP BI 10 TYPE BI 10 QUALITY IS OUR DRIVE
BODENABLASS - KUGELHAHN BOTTOM OUTLET BALL VALVE QUALITY IS OUR DRIVE KONSTRUKTIONSMERKMALE Design caracteristics Sumpffreier Einbau in den Behälter-Blockflansch Almost sump-free tank bottom Kompakte Bauweise
MehrDESIGN 1-piece designed wafer-type ball valve, full bore, mounting pad for actuator according to ISO 5211, Anti Static Device. TA Luft approval.
Technische Daten BAUFORM 1-teilige kompakte Körperkonstruktion, voller Durchgang, Flanschplatte für Antriebsaufbau nach ISO 5211, Anti Statik Ausführung. TA-Luft Abnahme BESONDERHEITEN kleines Einbaumaß
MehrGate Valve Absperrschieber
Gate Valve Absperrschieber Cast steel Stahlguß Type GA 100 PN 16 100 DN 50 600 11 14 15 23 13 20 18 22 6 12 16 19 21 2 24.1, 24.2 4 5 7 10 8 9 1 Created / Erstellt Checked / Geprüft Quotation / Angebot
MehrBenennung Designation Werkstoff /Material. CrNi/ Kunststoff CrNi/ Plastics 5 Welle Shaft X20Cr13 // X17CrNi //
Die beschriebenen Armaturen entsprechen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleichoder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle
MehrButterfly Valves Nr. 110
TRI-EX -Absperrklappe metalldicht, Typ AK 110, PN 10 bis PN 40, t = -60 C bis +400 C, Baulänge EN558-2 zum Einschweißen oder mit Flanschen, für Betriebsdrücke bis zu 50 bar. Klappenscheibe doppeltexzentrisch
MehrKompakt doppelt exzentrische Kugelhähne Compact double offset Ball Valves
Kompakt doppelt exzentrische Kugelhähne Compact double offset Ball Valves Kompakt doppelt exzentrisch, 3 teilig, weichdichtend Compact double offset, 3 parts body, soft sealing Type: KGH DN: 200 1200 (8
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrRA55... bis DN 150: ab DN 200: bis DN 100: ab DN 150:
Nr. 0 MFKugelhähne PN 1/ Gehäuse in dreiteiliger usführung, SandwichBauweise, ausschwenkbares Gehäusemittelteil, Dichtelemente aus PTFE, Betätigung durch Handhebel nschlussarten: mit Schweißenden nach
MehrRückschlagklappen Nr. 500 Rückschlagklappen mit Flanschanschluss PN 10 - PN 40
Rückschlagklappen Swing check valves Nr. 0 Rückschlagklappen mit Flanschanschluss PN PN Ausführung A: mit innenliegender Klappenwelle Ausführung C: mit außenliegender Klappenwelle und Hebel mit verstellbarem
MehrMX13. Kugelhähne Split body Typ KHS Ball Valves Split body Type KHS PN ; ANSI class DN ; NPS 2"...
MX1 Kugelhähne Split body Typ KS Ball Valves Split body Type KS PN 0... 0; ANSI class 00... 00 DN 0... 00; NPS "... 0" Technische Merkmale Technical characteristics KS/1-0/II PN 0... 0; ANSI class 00...
MehrAbsperrklappen Typ BD und BW Butterfly valves type BD and BW PN 2, , DN , Class , Size 2" "
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BD und BW Butterfly valves type BD and BW PN,..., DN 0... 00, Class... 0, Size "... 0" Absperrklappen Typ BD und BW Butterfly valves
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Schieber, weich dichtend Gate valves, soft seated PN 0... 0, DN 0... 00 Class 7... 00, Size ½"... " Schieber, weich dichtend Typ GTS Gate valves, soft
MehrKugelhähne Ball valves. Nr MF-Kugelhähne PN 16/40. MF-Ball valves PN 16/40
Nr. 0 0 MFKugelhähne PN / Gehäuse in dreiteiliger Ausführung, SandwichBauweise, ausschwenkbares Gehäusemittelteil, Dichtelemente aus PTFE, Betätigung durch Handhebel Anschlussarten: mit Schweißenden nach
MehrANTARES ANSI ISO 10497:2010. * Available on request * Auf Anfrage FIRE SAFE FIRE SAFE DN15 DN100
GAS DN15 DN100 FIRE SAFE ISO 10497:2010 FIRE SAFE until - bis DN150 (DN200 on request DN200 Auf Anfrage) * Available on request * Auf Anfrage 2921 AISI 316L 150 FROM BAR / AUS STANGE from 1/2" to 8" **
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
Mehr3-WEGE KUGELHAHN 3-WAY BALL VALVE TYP DT/DL 52 TYPE DT/DL 52. Qualität ist unser Antrieb
3-WEGE KUGELHHN 3-WY LL VLVE Qualität ist unser ntrieb 3-WEGE KUGELHHN 3-WY LL VLVE KONSTRUKTIONSMERKMLE DESIGN HRTERISTIS 1 nach T-Luft abgedichtete Schaltwelle 1 Stem according to T-luft emissions requirement
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrPN Absperrklappe 3-fach exzentrisch Valco Opal. Butterfly valve triple eccentric Valco Opal EKA
Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleichoder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreiboder Übersetzungsfehler übernehmen wir keine Haftung.
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
Handbetätigt allseitig mit Innengewinde mit T- oder L- Bohrung hand actuated all ports female thread with T- or L- configuration Bauart Nennweite DN 10 50 Betriebsdruck Handhebel Gehäusewerkstoff Kugelwerkstoff
MehrSchieber, metallisch dichtend Typ GTW Gate valves, metal seated type GTW PN 2, ; DN Class ; Size 2"...
WASSERARMATUREN Valves for drinking and sewage water Schieber, metallisch dichtend Typ GTW Gate valves, metal seated type GTW,5... 0; 50... Class 75... ; Size "... 5" Schieber, metallisch dichtend Typ
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BM und BT Butterfly valves type BM and BT PN 10..., DN... 00 Class 75...150, Size 1 ½"... 64" Absperrklappen Typ BM und Typ BT Butterfly
MehrMX13. Kugelhähne Welded design Typ KHW Ball Valves Welded design Type KHW PN ; ANSI class DN ; NPS 2"...
MX Kugelhähne Welded design Typ KW Ball Valves Welded design Type KW PN... 0; ANSI class 0... 00 DN 0... 00; NPS "... 0" Technische Merkmale Technical characteristics KW/-0/II PN... 0; ANSI class 0...
MehrSpecification. OPERATION Rotation of the handle through 90, with snap-in positions.
Technische Daten BAUFORM 1-teiliges Zentriergehäuse zum Einklemmen zwischen zwei Flansche nach EN 92-1 Typ 11 Form B (PN/PN1). Mit DVGW- Zulassung für Trinkwasser. BETÄTIGUNG 90 -Drehung des Handhebels,
MehrTECHNISCHES DATENBLATT Ausführung nach ASME (Metrisch)
brands you trust. TECHNISCHES DATENBLATT Ausführung nach ASME (Metrisch) Krombach KFO 9136 Metallisch dichtende Kugelhähne Crane ChemPharma & Energy Krombach KFO 9136 Wesentliche Merkmale und Vorteile
MehrDESIGN 1-piece designed wafer-type ball valve, full bore, mounting pad for actuator according to ISO 5211, TA-Luft approval
Technische Daten BAUFORM 1-teilige kompakte Körperkonstruktion, voller Durchgang, Flanschplatte für Antrieb nach ISO 5211, TA-Luft Zulassung BETÄTIGUNG 90 -Drehung des Handhebels (Um jeweils 180 gegen
MehrARGUS Ball valve FK 79
Technical design features: Design to API 6D / ANSI B 16.34 resp. PED 97/23/EC. Design to BS 5351 available on request. Konstruktion nach DGRL + AD 2000 Merkblatt, ANSI B16.34 bzw. API 6D, BS 5351 auf Anfrage.
MehrFBKH-Flanschkugelhähne Blocktyp Flanged ball valves block-typ
FBKH-Flanschkugelhähne Blocktyp Flanged all valves lock-typ (F)BKH SAE - SAE split (F)BKH SAE - SAE split FBKH DIN FBKH DIN rößen: 13 is 25 ehäuse: FSt-PI, Automatenstahl, S355J23 Kugel + Schaltwelle:
MehrRohrschieber Slide Valve
Rohrschieber Slide Valve Type: RS DN: 50 300 (2 12 ) PN: 6 160 (Class 125 900) Temp: 50 80 C Hydrostatischer Prüfdruck / Hydrostatic test pressure: 160 280 bar Abschluss Sitz / End cover seat: 100 160
MehrMaterials Standard Alternatives
Diaphragm Valve A1a/w Diaphragm Valve A1a/w Available sizes DN 15 - DN 350, PN 10. Diaphragm valve without stuffing box. Spindle enclosed, entirely protected against medium, non rising handwheel. Flanges
MehrFlansch Absperrklappe schweiß Konstruktion Flanged Butterfly Valve welded design
Absperrklappe schweiß Konstruktion Flanged Butterfly Valve welded design Doppelt exzentrische Absperrklappe Double offset Flanged Butterfly Valve Type: AKF DN: 200 3000 (8 120 ) PN: 6 40 (Class 125 300)
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrMX13. Kugelhähne Top entry Typ KHT Ball Valves Top entry Type KHT PN ; ANSI class DN ; NPS 2"...
MX Kugelhähne Top entry Typ KHT Ball Valves Top entry Type KHT PN 0... 00; ANSI class 00... 00 DN 0... 00; NPS "... 0" Technische Merkmale Technical characteristics KHT/-0/II PN 0... 00; ANSI class 00...
MehrTOPI 220. wartungsfreie weichdichtende Kugelhähne mit gelagerter Kugel. Typ VFD. Werkstoffe [nach DIN EN (DIN)] Einsatzgebiete.
Typenblatt 8221.1/9 wartungsfreie weichdichtende Kugelhähne mit gelagerter Kugel Flanschanschluß DN 80 PN 16/40 DN 100 PN 16/40 DN 150 PN 16/40 DN 200 PN 10/40 Die Stopfbuchsabdichtungen erfüllen die Anforderungen
MehrSpecification. OPERATION Rotation of the handle through 90.(Handle is reversible through 90.)
Technische Daten BAUFORM 2-teilige Körperkonstruktion (verschraubt), wartungsfrei, mit vollem Durchgang. Flanschplatte nach ISO 211 für Antriebsaufbau. Stempelung nach AD-Merkblatt A4, DN1.. DN80 Fire-Safe
MehrBronze BR - B 584 Spring: Stainless steel / AISI 316 Valve disc: Stainless steel / AISI 316 L
Technische Daten BAUFORM -teilige Körperkonstruktion, Zwischenflanschbauweise mit breiter Dichtfl äche nach DIN. ANSCHLUß DN 5 bis DN EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten
MehrInhaltsverzeichnis Index
Sicherheits- / Entlastungsventile, für Lebensmittel - Pharmazie Safety- / Relief-Valves, Food - pharmacy 5 Inhaltsverzeichnis Index Ventil Valve Typ 44 Verwendung Use Entlastungsventil, federbel. Lebensmittel
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrTECHNISCHE DATEN TYP HET TECHNICAL DATA. Single-acting hydraulic telescopic cylinder
TECHNISCHE DATEN TYP HET Hydraulisch einfachwirkender Teleskopzylinder TECHNICAL DATA TYP HET Single-acting hydraulic telescopic cylinder, bis zu 5 Stufen, Nenndruck max. 200 bar. Sonderausführung nach
MehrPN Kipprückschlagklappe Valco Sapphire. Tilting disc check valve Valco Sapphire ERK
Die beschriebenen Armaturen entsprechen dem derzeitigen Stand der The construction represents the current technical standards. We reserve the right to change the technical details and to use materials
MehrControl shut-off butterfly valves DN 50 DN 400 PN
Features Applications include HEVAC and drinking water systems, sanitary and industrial plants for control or shut-off of water and steam -10...+110 C Leakage rate: tight sealing Control and shut-off butterfly
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrARGUS Flanged ball valve FK75M Technical data sheet
Flanged ball valve FK75M Technical data sheet DN65 (2 1/2 ) DN150 (6 ) PN10 PN40, ANSI150 ANSI300 Material: low temperature carbon steel / stainless steel Sealing system: soft seated / full metal seated
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrPSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve
PSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve Typ (Type) GSAL DN 40 500 PN 10 250 mit Flanschen oder Anschweißenden DN 40 500 PN 10 250 with flanges or welding ends - Ausführung
MehrFlansch-Hebel-Sicherheitsventile
Flansch-Hebel-Sicherheitsventile Flanged Safety Valves with Lever and Weight Inhalt Contents Type Seite/Page Normal-Sicherheitsventil Safety Relief Valve mit Hebel und Gewicht bis PN 40 with Lever and
MehrProduktübersicht Product Range
Produktübersicht Product Range Unternehmensprofil Gegründet:...1956, Familienunternehmen Geschäftsführer:...Dr. Ing. Thomas Böhmer Mitarbeiter:...250 Jahresumsatz:...60 Mill. DEM Produktionsfläche:...25.000
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
MehrRückschlagklappen Kunststoff Swing check valves plastic
Übersicht / Overview Baureihe Type Ausführung Design Gehäuse: PVC-U Klappe: Feder: PVC-U Edelstahl.7, Hastelloy C (.0) Dichtungen:NBR, EPDM, FPM (Viton) oder PTFE Druckbereich: 0 bis bar Body: Disc: Spring:
MehrMaterials Standard Alternatives. Body: GGG 40 GG25, GGG40.3,
Butterfly Valve centric K1 / K6 Butterfly Valve K1, lug type, centric execution Available sizes DN 40 DN 1000, seatring reinforced and replaceable lug type execution with threaded holes for mounting between
MehrEDELSTAHL STAINLESS STEEL
EDESTA 1-teiliger Muffenkugelhahn, PN 6 red. Durchgang Innengewinde 1 /" DIN EN 26-1:0 (alt. DIN 2999) Gehäuse:. Nr. 1. Kugel:. Nr. 1.1 Spindel:. Nr. 1.301 ring, Federring, Mutter:. Nr. 1.301 Kugeldichtungen:
MehrButterfly control valve type GGD. Drosselklappe Typ GGD. OHL Gutermuth Industrial Valves GmbH
Drosselklappe Typ GGD insatzgebiete: z. B. Chemie, Petrochemie u. a. für Abgas, Heißgas, Rauchgas, Brüdendampf Merkmale: DN 100 - DN 2000 bzw. 4 80 Klappenscheibe anschlagend Leckrate 0,05% Kvs 90 inklemmausführung
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
Mehrwatergates knife-gate-valves - Stoffschieber
watergates knife-gate-valves - Stoffschieber Technische Daten BAUFORM Keilflachschieber mit Innenspindel, DIN 3352/4A, weichdichtend, wartungsfrei. Für den Einsatz im Nutz- und Abwasserbereich. VORTEILE
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrDN PN PSA-BETINA Keil Absperrschieber. Typ GIL ( Type GIL ) PSA-BETINA Wedge Gate Valve
PSA-BETINA Keil Absperrschieber PSA-BETINA Wedge Gate Valve DN 40 500 PN 10 16 - Mit Flanschen nach EN 1092 Teil 2 With flanges acc. EN 1092 part 2 - Baulängen nach EN 558 Teil 1 Reihe 14 oder 15 Face
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrRA55... bis DN 150: ab DN 200: bis DN 100: ab DN 150:
Nr. 0 0 MFKugelhähne PN / Gehäuse in dreiteiliger Ausführung, SandwichBauweise, ausschwenkbares Gehäusemittelteil, Dichtelemente aus PTFE, Betätigung durch Handhebel Anschlussarten: mit Schweißenden nach
MehrButterfly Valve Type AK03 / AK04
Butterfly Valve Type AK03 / AK04 description: Butterfly valve to control a liquid or gaseous media in a pipeline system. features: - suitable for neutral and not neutral gaseous & liquid media - Maintenance
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrPIPING POWER. Flanschkugelhahn KS/0 Flanged ball valve KS/0 5/7 KS/0 DN:; DN;= KS/0 DN0; DN5== KS/0 DN5:; DN:==
KS/0 DN:; DN;= KS/0 DN0; DN5== KS/0 DN5:; DN:== Abbildung ggf. abweichend picture may be different 5/7 KS/0.5 Standardausführung KS/0.5 standard design Material material Gehäuse Kugelgraphitguss GJS-344
MehrTurbine Drain Valve Turbinen-Entwässerungsventil
Turbine Drain Valve Turbinen-Entwässerungsventil Type 172 A, 172 J PN 100 400 DN 25 65 28 29 30 31 32 86 85 34 35 36 37 38 41 14.1 13 3 43 1 27 26 25 24 23 22 21 20 19 18 17 16 15 5 4 14 12 172 J 3-stage
MehrTECHNISCHE DATEN TYP D TECHNICAL DATA
TECHNISCHE DATEN TYP D Hydraulik Differentialzylinder ohne Endlagendämpfung TECHNICAL DATA TYP D Hydraulic differential cylinder without end position damping Hydraulik Differentialzylinder ohne Endlagendämpfung,
MehrPIPE CLASS 025Y01 CAC PAGE 30 P I P I N G E N G I N E E R I N G CHEMNITZ PRINTDATE
COMPKEYNO 18323241 VAR. LL03 NO. A 324 17.04.2013 30 IDENT NO. : A 324 - PN 25 : BUTTERFLY VALVE FOR FLANGE JOINT ACC.TO EN 1092-1 FACING TYPE B1 : DIN EN 593 AND MANUFACTURERS : LUG TYPE WITH THREADED
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrARGUS Flanged ball valve EK71 Technical data sheet
Flanged ball valve EK71 Technical data sheet DN15 (1/2 ) DN50 (2 ) PN16 PN100, ANSI150 ANSI600 Material: carbon steel / low temperature carbon steel / stainless steel Sealing system: soft seated split
MehrARGUS Ball valve FK 76M / 78 (M) ARGUS Kugelhahn FK 76M / 78 (M)
ARGUS Ball valve FK 76M / 78 (M) ARGUS Kugelhahn FK 76M / 78 (M) Technical design features: Technische Konstruktionsmerkmale: Design to API 6D / ANSI B 16.34 resp. PED 97/23/EC; BS 5351 available on request.
MehrWerkstoffe [nach DIN EN (DIN)] Dichtungen:
Typenblatt 80.1/1 TOPI 10 wartungsfreie weichdichtende Kugelhähne mit schwimmender Kugel Flanschanschluß PN 10 DN 15 150 Die Stopfbuchsabdichtungen erfüllen die Anforderungen der TA-Luft 00 Typ VFD Einsatzgebiete
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
Mehr42 QUALITY SINCE Ball Valves KUGELHÄHNE
594 High-Temperature-Ball Valve DIN-DVGW for Gas and Potable Water Hochtemperatur-Kugelhahn DIN-DVGW für Gas und Trinkwasser ROSTECHNADZOR (GGTN) 1 Cu Zn 40 Pb 2 - DIN EN 12165 2 3/8-1 Cu Zn 39 Pb 3 -
Mehr