The following products presented in this data sheet are being withdrawn.
|
|
- Hilke Hannah Thomas
- vor 7 Jahren
- Abrufe
Transkript
1 RM Cores Series/Type: RM The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B80C0000R0 B80C0000R B80J0000Y04 B80J0000Y B80K1004D00 B80K100D B39C1003X101 B39C1003X B80A B80A300X0 B80C3001X B39C100X101 B39C1003X For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at
2 Core B80 In accordance with IEC 0431 Core without center hole for transformer applications RM cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole 1,0 0,8 0,8 430 without center hole 0,93,1 3,8 18 mm 1 mm mm mm mm 3 Approx. weight (per set) m,9 3,0 g Gapped Material A L value nh s approx. mm µ e Ordering code 1) -C with center hole -N with threaded sleeve K1 ± 3 % 1,0 19,9 B80-+-A1 40 ± 3 % 0,40 31,8 B A1 M33 3 ± 3 % 0,4 0, B80-+3-A ± 3 % 0, 79, B A33 N48 10 ± 3 % 0,1 18 B A48 0 ± 3 % 0,0 00 B80-+0-A48 31 ± 3 % 0,03 B A48 1) Replace the + by the code letter C or N for the required version /01
3 Core B80 Ungapped Material A L value nh µ e A L1min nh P V W/set Ordering code -C with center hole -J w/o center hole N / 0 % 1430 B80-C-R T7 1) / 0 % 190 B80-J-R7 N / 0 % 90 B80-J-R30 T / 30 % 490 B80-J-Y38 T / 30 % 7090 B80-J-Y4 N / 0 % < 0,0 B80-J-R49 (0 mt, 00 khz, 100 C) N / 0 % < 0,3 B80-J-R87 (00 mt, 100 khz, 100 C) N97 1) / 0 % < 0,4 B80-J-R97 (00 mt, 100 khz, 100 C) N / 0 % < 0,10 (00 mt, 100 khz, 100 C) B80-J-R41 1) Preliminary data 19 08/01
4 B80 Coil former Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 008: H max. operating temperature 180 C), color code blue Solderability: to IEC , test Ta, method 1 (aging 3): 3 C, s Resistance to soldering heat: to IEC , test Tb, method 1B: 30 C, 3, s Winding: see Processing Notes, page 13 Pins squared in the start-of-winding area For matching clamps and insulating washers see page 197 Sections A N mm l N mm A R value µω Pins Ordering code 1 9, 90 4 B80-K1004-D1 B80-K100-D1 B80-K100-D1 8 B80-K1008-D1 8, B80-K1004-D B80-K100-D B80-K100-D 4 pins and pins 8 pins 4 Sti te und Sti te 8 Sti te 0,7+0,0 0,7+0,0 +0,1 1,9 _ 0,1,1 _ 0,1 0,7±0,0 0,±0,0 ø1+0,1 3 ø,9 _ 0,1 0,4 max. ±0,3 *) ø0, max. *) 4 3 ø10,1_ 0,1,9 _ 0,1,1 _ 0,1 0,49±0,0,4 *) Pin Bei Ausführung 4 is omitted in Stiften -pin entfällt version. Stift 4 Lochgruppen Hole arrangement Ansicht in View Montagerichtung in mounting direction Ground Erdungspunkte Ø 1,3+0,1 ø1,3+0,1 FRM078-J 0 _ 10 FRM078-J 19 08/01
5 B80 With ground terminal, made of stainless spring steel (tinned), 0,33 mm thick Solderability to IEC , test Ta, method 1 (aging 3): 3 C, s Also available as strip clamp on reels Insulating washer 1 between core and coil former For tolerance compensation and for insulation Made of polycarbonate (UL 94 V-0, insulation class to IEC 008: E Insulating washer for double-clad PCBs Made of polycarbonate (UL 94 V-0, insulation class to IEC 008: E (ordering code per piece, are required) Insulating washer 1 (reel packing, PU = 1 reel) Insulating washer (bulk) 10 C), 0,0 mm thick 10 C), 0,3 mm thick Ordering code B80-A03 B80-A000 B80-D00 Insulating washer 1 Insulating washer 9,3+0, 8,3+0,1 0, 0,1 _,4 max. 0, _ 0,1 4, +0,1 _ 0,3 0,7 FRM001-J ing forces for RM F min : Extension of clamp from a to a = X min F max : Extension of clamp from a to a 1 = X max 8,7 opening a (mm) 8,3 + 0,1 Core nose Z max (mm) 0,1 Height of core pair X (mm)x min X max 9, ing force F (N) F min F max /01
6 B8 B80 SMD coil former with gullwing terminals Material: GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 008: F max. operating temperature 1 C), color code black Solderability: to IEC , test Ta, method 1 (aging 3): 30 C, 1 s Resistance to soldering heat: to IEC , test Tb, method 1B: 30 C, 3, s permissible soldering temperature for wire-wrap connection on coil former: 400 C,1 s Winding: see Processing Notes, page 10 Without ground terminal, made of stainless spring steel, 0,33 mm thick Also available as strip clamp (each carton containing reels) on request Sections A N l N A R value Terminals Ordering code mm mm µω 1 11, B8-F1008-T1 10, 8 8 B8-F1008-T (ordering code per piece, are required) B80-J04 Coil former 1 section sections ø10,1 _ 0, ø _ 0,1 ø+0,1 3 x 3,81 = 11,43 0, 0,4±0,0 3,81 0,±0,0 13,4 _ 0, 19 _ 0, ,3 14, _ 0,, _ 0, 8,9±0, 0,4±0, ,3 8,3+0,1 0, 0,1 _ 0, _ 0,1,1±0,1 FRM00-G 1, 11,43 Recommended PCB layout, 0,3 3,81 FRM09-H /01
7 B8 B80 SMD coil former with J terminals Material: GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 008: F max. operating temperature 1 C), color code black Solderability: to IEC , test Ta, method 1 (aging 3): 30 C, 1 s Resistance to soldering heat: to IEC , test Tb, method 1B: 30 C, 3, s permissible soldering temperature for wire-wrap connection on coil former: 400 C,1 s Winding: see Processing Notes, page 10 Without ground terminal, made of stainless spring steel, 0,33 mm thick Also available as strip clamp (each carton containing reels) on request Sections A N l N A R value Terminals Ordering code mm mm µω 1 11, B8-J1008-T1 (ordering code per piece, are required) B80-J04 Coil former _ 0,1 1, 9,8±0,1 7,1±0,1 ø,9 _ 0,1 0,4±0,0 1,,1 _ 0,1 9,3 8,3+0,1 0, 0,1 _,1±0,1 3x3,81 = 11,43±0,1 0,,8 3,81±0, , _ 0, 18, _ 0, +0, ,1 13, _ 0, 0,3 0,7±0,0 0, 1,7 10,1 _ 0,1 1,0 _ 0, Recommended PCB layout 1 1, 3,81 11,43 FRM097-Q 0, _ 0,1 FRM00-G /01
8 B39 B3399, B80 Adjusting screw Tube core with thread and core brake made of GFR polyterephthalate Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Core RM Adjusting screw Min. Ordering code Fig. Tube core adjusting Material A range L value length Mate- Color nh mm rial code % K 1 a 1,81,0 Si 1 black 13 B39-C1003-X a 1,81,0 K 1 yellow 1 B39-C1003-X1 M 33 3 a 1,81,7 Si 1 white 11 B39-C100-X a 1,81,0 K 1 yellow 14 B39-C1003-X1 N a 1,81,7 N red 1 B39-C100-X 0 31 b 1,81 3,4 N green 13 9 B80-C3001-X 31 b 1,90 3,4 N blue 1 B80-A300-X Adjusting screwdriver B3399-B4 Handle B3399-B Adjusting screws a b 00 08/01
9 Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach , 8117 München, DEUTSCHLAND EPCOS AG 000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box , 8117 Munich, GERMANY EPCOS AG 000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1
The following products presented in this data sheet are being withdrawn.
RM Cores Series/Type: RM 10 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B65814N1011D001
MehrThe following products presented in this data sheet are being withdrawn. B65816D
RM Cores Series/Type: RM 12 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B65816D20050000
MehrP V W/set N / 20 % 2530 B66317-G-X130 N / 20 % < 0,59
Core B66317 In accordance with IEC 61246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A = 1,1 mm 1 l e = 57,5 mm A e = 52,5 mm 2 A min = 51,5 mm 2 V e = 3 020 mm 3 Approx.
MehrThe following products presented in this data sheet are being withdrawn. B66307F0000X142 B66307F0000X
E/ELP Cores Series/Type: E 16/8/5 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66307F0000X142
Mehrmm 1 mm mm 2 mm 3 P V
Core B65671 In accordance with IEC 60133 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e Approx. weight (per set) Gapped with center hole 0,4 37,2 93 76,5 3 460
MehrPM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 14 x 8 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
MehrPM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 36 x 22 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
MehrThe following products presented in this data sheet are being withdrawn. B66305F0000X142 B66305F0000X
E/ELP Cores Series/Type: E 13/7/4 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66305F0000X142
MehrPM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 18 x 11 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
MehrETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
MehrThe following products presented in this data sheet are being withdrawn. B66414B6008T002 2003-08-08 2004-02-29 2004-08-31
EFD/EV/DE Cores Series/Type: EFD /8/ The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66B6008T002
MehrOvercurrent Protection Leaded Disks, Coated, 12 V, 24 V
B99* C 93 C 99 Applications Overcurrent and short-circuit protection b 3, max. Features Lead-free terminals Manufacturer s logo and type designation stamped on in white Low resistance For rated currents
MehrDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant
MehrEMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
MehrSMD Varistors Monolithic; Standard Series
Construction Cylindrical varistor element, encapsulated Encapsulation: thermoplast, flame-retardant to UL 94-0 Termination: tinned copper alloy Features Electrical equivalents to leaded types S05/S07 up
MehrSIMID 1210-100. Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µh Rated current 65 to 800 ma
Size 12 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 0 µh Rated current 65 to 800 ma Construction Ceramic or ferrite core Laser-welded winding Flame-retardant encapsulation Features Very wide temperature
MehrEMI Suppression Capacitors X2 / 275 Vac
EMI Suppression Capacitors X2 / B81130 X2 capacitors with very small dimensions Rated ac voltage 275 V, 50/60 Hz Construction ielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing,
MehrB81133 X2 MKT/SH 40/100/21/C B81133 X2 MKT/SH 40/100/21/C. EMI Suppression Capacitors X2 / 275 Vac Not for new design
EMI Suppression Capacitors X2 / X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz 1) Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy
Mehr3-Line Filters for Converters and Power Electronics B84143-G*-R110 B84143-G*-R112
B8443-G*-R0 B8443-G*-R2 Power line filters for three-phase systems Rated voltage 4/275 and 520/300 V~, 50/ Hz Rated current 8 to 220 A Construction Three-line filter Metal case Book size Features High
Mehrfor Installations and Systems
or Installations and Systems Power line ilters or three-phase systems Rated voltage 4/25 V~, 5/ Hz Rated voltage 6 to 125 A Construction Four-line ilter Metal case Features High insertion loss Compact,
MehrSIFI-A Series. SIFI-A for normal insertion loss Rated voltage 250 V~, 50/60 Hz Rated current 1 A to 20 A
2-ine Filters SIFI- Series 4111 SIFI- for normal insertion loss Rated voltage 2 V~, / Hz Rated current 1 to Construction Two-line filter Metal case Polyurethane potting (U 94 V-) Features Compact design
MehrSwitching Applications PTC Thermistors in Plastic Case, 63 V to 220 V
Switching Application PTC Thermitor in Platic Cae, 63 V to 22 V J 28... J 29 Application Delayed witching of load For frequent witching 6,3 max. 6,3 max. Feature Encaed thermitor dik with clamp contact
MehrSMD Varistors MLV; Telecom Series
ML; Telecom Series Construction Multilayer technology Termination: nickel barrier (CT series) or silver palladium (CN series) No plastic or epoxy encapsulation assures better than UL 94-0 flaability rating
Mehr3-Line Filters for Converters and Power Electronics B84143-B*-R110 B84143-B*-R112
B83-B*-R Power line ilters or three-phase systems Rated voltage /275 and 5/ V~, / Hz Rated current 8 to A Construction Three-line ilter Metal case Book size Features Very high insertion loss Low leakage
MehrB45194, B Tantalum Chip Capacitors Low Profile, H max = 2 mm; Standard and Low ESR
New series Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Maximum height 2,0 mm Features High volumetric
MehrDickfilm-Widerstände Thick-Film Resistors
Dickfilm-Widerstände Thick-Film Resistors Dickfilm-Widerstände werden universell eingesetzt: in der Uhrenindustrie, Kommunikations-/Datentechnik,... bis hin zur Kfz-Elektronik. Verwendung finden die Baugrößen
MehrKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MehrSOCKET AND RING Lead (Pb) Free Product - RoHS Compliant. Sleeves and Ring for 3 mm and 5 mm LED. full production
2006-06-12 SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant Sleeves and Ring for 3 mm and 5 mm LED full production Applications Signal lamp for front panel installation using clip mounting and a
MehrD-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
Mehr336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
MehrTaster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
MehrEMV-Bauelemente EMC Components
EMV-Bauelemente EMC Components SIMIDs werden für die nieder- und hochfrequente Entkopplung von Signal- und Steuerkreisen sowie zum Aufbau von Schwingkreisen eingesetzt. Typische Anwendungsgebiete sind:
MehrEdelstahlgetriebe stainless steel gearboxes
Edelstahlgetriebe stainless steel gearboxes Technische Daten /technical data N e u! N e w! Das besondere Kegelradgetriebe the unique bevel gearbox 1 Spiralkegelgetriebe in Edelstahlausführung VA Spiral
MehrReflector Lead (Pb) Free Product - RoHS Compliant. Reflector for 3 mm and 5 mm LED (silver) full production
2006-06-12 Reflector Lead (Pb) Free Product - RoHS Compliant Reflector for 3 mm and 5 mm LED (silver) full production Features: Besondere Merkmale: Package: reflector for 3 mm and 5 mm LED, Gehäusetyp:
MehrUmschaltventile Magnete
Umschaltventile Magnete DFE1/6 estellnr. Typ 2-11-12 DFE1/618ES-W22-12VDC 2-11-13 DFE1/618ES-W22-24VDC 24--116 DFE1/618ES-Y22-12VDC 24--117 DFE1/618ES-Y22-24VDC 24--1 DFE1/618ES-W22-12VDC 24--12 DFE1/618ES-W22-24VDC
MehrKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MehrUmschaltventile Magnet
Umschaltventile Magnet DFE1/3 estellnr. Typ 2-11-1 DFE1/318ES-W22-12VDC 2-11-1 DFE1/318ES-W22-24VDC 24-2-116 DFE1/318ES-Y22-12VDC 24-2-117 DFE1/318ES-Y22-24VDC Weitere Umschaltventil Varianten auf nfrage
MehrDIN Steckverbinder / Connectors
14 DIN 41617 Steckverbinder / Connectors Steckverbinder DIN 41617 Connectors DIN 41617 Dieser traditionelle Steckverbinder geht nach wie vor immer noch seinen Weg in den vielfältigsten Anwendungsbereichen.
MehrD-Sub Dualport Connectors D-Sub Dualport Steckverbinder
Contact Cambridge Connectors. Phone +44 1223 841 Email: sales@cambridgeconnectors.com D-Sub Dualport Connectors D-Sub Dualport Steckverbinder Ordering Code Bestellschlüssel 88 DS 1/27 Technical Data Technische
Mehr0805 (2012) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0805 (2012) wire-wound (AgPd/Ni/Sn Metallisation)
complaint 85 (212) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 85 (212) wire-wound (AgPd/Ni/Sn Metallisation) - 34 - Allgemeine Eigenschaften und technische Informationen zu den drahtgewickelten SMD-Spulen
MehrMicro-RF. 294 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
Micro-RF components can be used up to 6 GHz in various wireless applications, e. g. cellular and cordless phones, Bluetooth and wireless LAN applications, PDAs (Personal Digital Assistants) or wireless
MehrCELSIUS M / R / V Rack Kit. Mounting Instructions
CELSIUS M / R / V Rack Kit Mounting Instructions Are there...... any technical problems or other questions you need clarified? Please contact: our Hotline/Help Desk (see the included Help Desk list or
MehrDevice Component: - SIPLUS extreme S AI 8xU/I HS T1 RAIL Order Nr. 6AG2531-7NF10-1AB0. Breslauer Straße Fürth Deutschland
Department: DF FA SE R&D CI Date: 15.04.2016 Device Component: - SIPLUS extreme S7-1500 AI 8xU/I HS T1 RAIL Order Nr. 6AG2531-7NF10-1AB0 AI8xU/I/ HS+Bus Connector Sitz der Gesellschaft: Berlin und München,
MehrHigh Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder Technical Data Technische Daten Mechanical Data Mechanische Daten Shell Gehäuse Insulator Isolierkörper Signal contacts Signalkontakte
Mehr114-18867 09.Jan 2014 Rev C
Application Specification 114-18867 09.Jan 2014 Rev C High Speed Data, Pin Headers 90 / 180 4pos., shie lded High Speed Data, Stiftleiste 90 / 180, geschirmt Description Beschreibung 1. Packaging of pin
MehrTechnical Terms Technische Daten: Operating voltage Betriebsspannungsbereich Rated Voltage Nennspannung
Technical Terms Technische Daten: Operating voltage Betriebsspannungsbereich Rated Voltage Nennspannung 4...7 V 5 V *) Rated Current Nennstrom < 50 ma Sound Output [SPL]at 10 cm Lautstärke[Schalldruckpegel]
MehrBestellformel BI 8 F 24 V DC 15 % ED Order specifications Hubmagnet
Bestellformel % ED Order specifications Litze (Standardlänge 0 cm) Lötpins (Rastermaß) L lying leads (0 cm standard length) Soldering pins (grid dimensions) Nennspannung (Standardspannung) ) 4 Nominal
MehrDieselbären Diesel Pile Hammers
Dieselbären Diesel Pile Hammers Dieselbären D6-32 D8-22 D12-42 D16-32 Schlaggewicht (Kolben) Impact weight (piston) kg 600 800 1280 1600 Energie pro Schlag Energy per blow knm 19-9 27-13 46-20 54-25 Schlagzahl
MehrDatenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
MehrReflector Type STANDARD: Reflector Type CUSTOM:
options rot red blau blue grün green weiß (5600K) white warmweiß (3500K) warmwhite ultraweiß (6500K) ultrawhite RGB (nicht für Komplettlösungen verfügbar) RGB (not available for assembled solution) Ø 5
MehrDevice Component: - SIPLUS extreme ET 200MP IM PN ST TX RAIL Order Nr. 6AG2155-5AA00-4AB0. Breslauer Straße Fürth Deutschland
Department: DF FA SE R&D CI Date: 15.04.2016 Device Component: - SIPLUS extreme ET 200MP IM 155-5 PN ST TX RAIL Order Nr. 6AG2155-5AA00-4AB0 IM 155-5 PN+Bus Connector Sitz der Gesellschaft: Berlin und
MehrRegistration of residence at Citizens Office (Bürgerbüro)
Registration of residence at Citizens Office (Bürgerbüro) Opening times in the Citizens Office (Bürgerbüro): Monday to Friday 08.30 am 12.30 pm Thursday 14.00 pm 17.00 pm or by appointment via the Citizens
MehrElectrical testing of Bosch common rail piezo injectors
Applies to generation CRI 3: Bosch 10-position order number 0 445 115 = CRI 3-16 (CRI 3.0) 1600 bar 0 445 116 = CRI 3-18 (CRI 3.2) 1800 bar 0 445 117 = CRI 3-20 (CRI 3.3) 2000 bar Tools required: Hybrid
MehrPhotovoltaic Mounting Material Catalogue
Photovoltaic Mounting Material Catalogue (PV Installation & PV Accessories) PV Installation & Mounting Material PHOTON SOLAR provides a professional and flexible PV Mounting and Installation material which
MehrD-Sub Connectors with Metal Brackets F and Accessories D-Sub Steckverbinder mit Metallwinkel F und Anbauteilen
D-Sub Connectors with Metal Brackets F1080-... and Accessories D-Sub Steckverbinder mit Metallwinkel F1080-... und Anbauteilen ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL
MehrGasring-Vakuumpumpen/- Kompressoren. Serie/Series G-BH1. Ersatzteilliste Spare part list. Typ / Type 2BH1 1
Gasring-Vakuumpumpen/- Kompressoren Ersatzteilliste Spare part list Serie/Series G-BH1 Typ / Type 2BH1 1 Gardner Denver Deutschland GmbH Postfach 1510 97605 Bad Neustadt / Saale Germany Tel.: +49 7622
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrFMC. 52 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
MehrHigh pressure hose H3 Nominal diameter bar working pressure outside diameter 6 mm
Schlauchleitungen hoses Hochdruckschlauch H3 Nenngröße 3 Druck bis 280 bar Außendurchmesser 6 mm High pressure hose H3 Nominal diameter 3 280 bar working pressure outside diameter 6 mm Hochdruck-Schlauchleitung
MehrElectrical testing of Bosch common rail solenoid valve (MV) injectors
Applies to MV injector, generation: -CRI 1.0 / 2.0 / 2.1 / 2.2 -CRIN 1 / 2 / 3, with K oder AK plug Bosch 10-position order number Bosch-Bestellnummer CRI: 0 445 110 xxx Bosch-Bestellnummer CRIN: 0 445
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... Zubehör für Netzgeräte ccessories for power supplies Mehrfach isolierte Wickeldrähte Multiple
MehrSMT Connectors SMT Steckverbinder. Ordering Code Bestellschlüssel
SMT Connectors SMT Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 21 Special Features Besondere
MehrSIMATIC Industrie-PC IPC477D PRO Produktinformation
SIMATIC Industrie-PC Produktinformation Gültigkeit Die Hinweise in dieser Produktinformation sind den Aussagen in den zu Grunde liegenden Betriebsanleitungen, in den Release Notes und in der Online-Hilfe
MehrTHT/THR Connectors THT/THR Steckverbinder
Contact Cambridge Connectors. Phone +44 1223 860041 Email: sales@cambridgeconnectors.com THT/THR Connectors THT/THR Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Steckdose Socket-outlet Typ(en) / Type(s): 6211..EMS Si/I
MehrLötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte. 90 Solder pin, 9.4 mm Machined contacts. Stiftleiste Plug connector. Buchsenleiste Socket connector
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte 90 Solder pin, 9.4 mm Machined contacts Stiftleiste Plug connector Buchsenleiste Socket connector A A D D 1 2 3 4 5 5 4 3 2 1 7 8 9 Ø 0. 10 9.4 1.3 max.
MehrProduktdatenblatt. Artikel Nr.: Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W. Technische Daten.
Produktdatenblatt Artikel Nr.: 110010 Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W Technische Daten Charakteristik Material Farbe Aluminium Druckguss Weiß-matt Optik im Lieferumfang
MehrFlüssigkeitsring -Vakuumpumpen/ - Kompressoren Liquid ring vacuum pumps/ compressors. Serie/Series L-BV2. Ersatzteilliste Spare part list
Flüssigkeitsring -Vakuumpumpen/ - Kompressoren Liquid ring vacuum pumps/ compressors Ersatzteilliste Spare part list Serie/Series L-BV2 Typ / Type 2BV2060 2BV2061 2BV2070 2BV2071 Gardner Denver Deutschland
MehrBAGS GROUP I PRICE IN EUR/PCS TECHNICAL SPECIFICATION 1,47 1,05 1,86 1,31 1,51 1,09 0,90 0,88 1,06 0,79 0,81 0, , ,76 0,77 0,74
BAG/BOX Made-to-measure paper bags! The production of our bags is based on innovative solutions and high-quality materials. We pay a lot of attention to details. The majority of elements in our bags is
MehrBausatz Lichtschranke Kit Light Barrier
Verwendung des Nachrüstsatzes Der Bausatz Lichtschranke - Teile Nr. 0806 49000 ist für Nähanlagen der Klasse 806 vorgesehen. Inhalt des Teilesatzes Lichtschranke für Transferplatte Lichtschranke für automatisches
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
MehrD-Sub Connectors with Plastic Brackets and Accessories D-Sub Steckverbinder mit Kunststoffwinkel und Anbauteilen
D-Sub Connectors with Plastic Brackets and Accessories D-Sub Steckverbinder mit Kunststoffwinkel und Anbauteilen Plastic brackets are used to ensure that a conductive electrical connection does not occur
MehrArcelorMittal Distribution. Structural hollow sections Square and rectangular hollow sections
ArcelorMittal Distribution Structural hollow sections Square and rectangular hollow sections Structural hollow sections 10/2008 Welded square hollow sections (inc. structural sections) acc. to EN 10305-5
MehrLow Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe
Contact Cambridge Connectors. Phone +44 1223 8641 Email: sales@cambridgeconnectors.com Low Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe Ordering Code Bestellschlüssel ALL DIMENSIONS
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
MehrZehnder CLD. Housing for walls, floors and ceilings
Benefits Suitable for wall, floor or ceiling installation Air volumes up to a maximum of 30 m 2 /h (ComfoTube 75) and 45 m 2 /h (ComfoTube 90) Can be installed in timber or solid constructions Extract
Mehr3,5-0,5 X X+1,1 2,54 1,5+0,5 0,7 3,9 0,7. Bestell-Nr. Order No. LED LED. 3 mm 3 mm DAH 31 xxx 3,5-0,5 X X+2 0,7 + 1,5+0,5 0,7 2,54
Distanzhalter von 3-25 mm In Leiterplatten eingesetzte Bedienelemente wie z. B. Taster oder Potentiometer erfordern oft die definierte Anpassung der wesentlich kleineren Bauhöhe von LEDs. Diese Baureihen
MehrAderendhülsen Ferrules
Aderendhülsen Ferrules 1 Aderendhülsen Ferrules Seite Page Allgemeine Informationen General information 11 Aderendhülsen, Einzelbeutel Insulated ferrules, single bag 12 Aderendhülsen, Bandware Insulated
MehrNewest Generation of the BS2 Corrosion/Warning and Measurement System
Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing
MehrHochkonstante Keramik-HF-Spulen Highly Constant Ceramic RF Coils
Hochkonstante Keramik-HF-Spulen Highly Constant Ceramic RF Coils Inhaltsverzeichnis / Contents Seite / Page Festinduktivitäten für gedruckte Schaltungen 116-126 Fixed Inductances for PC Boards Zertifiziertes
MehrData sheet Modul wall outlet UP 1 port pearl white unequipped
Illustrations Dimensional drawing Page 1/5 See enlarged drawings at the end of document Product specification flush-mounted termination unit for individual modules in Modul design module plug direction
MehrLFM (mit 3mm LED) LFM (with T1 LED)
LFM (mit 3mm LED) LFM (with T1 LED) Innenreflektor Internal reflector Abmessungen Dimensions Frontplattenbohrung Frontpanel drilling Technische Daten / Technical data 1. Elektrische Kennwerte / Electrical
MehrInstallation Instructions
EN DE Installation Instructions WLAN Installation Kit, 300 Mbps, 5 GHz, 16 dbi AK-4 Wireless Kit Scope of delivery Junction box AK-4 (1x) 1 Connection board AK-4 CB with 12VDC power supply unit (1x) 2
Mehrmax. Flügelgewicht: 140 kg max. Flügelgewicht: 200 kg max. Flügelbreite: mm max. Flügelbreite: mm
JUMBO Allgemeine und technische Hinweise: JUMBO - Universalbeschläge haben ihren besonderen Einsatzbereich bei stärkeren Glasdicken und großen Flügelabmessungen gefunden. Dieser Beschlag ist geeignet für
MehrM8 Type M8/M12 distribution boxes with terminal contacts. Serie M8 M8/M12 Verteiler-Boxen mit Anschlussklemmen. M8/ M12 Verteiler-Boxen
M Type M/M distribution boxes with terminal contacts Serie M M/M Verteiler-Boxen mit Anschlussklemmen M/M distribution boxes M/ M Verteiler-Boxen PRODUCT M distribution boxes housing colour: black, yellow,
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. PV-Wechselrichter mit selbsttätiger Freischaltstelle
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
40018443 Blatt / page 2 5006301-4880-0001 / 151670 / FG34 / SCT 2011-07-08 2006-08-02 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40018443. This supplement
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with
MehrUser Manual Bedienungsanleitung. www.snom.com. snom Wireless Headset Adapter snom Schnurlos-Headset-Adapter. English. Deutsch
English snom Wireless Headset Adapter snom Schnurlos-Headset-Adapter Deutsch User Manual Bedienungsanleitung 2007 snom technology AG All rights reserved. Version 1.00 www.snom.com English snom Wireless
MehrAdvanced Availability Transfer Transfer absences from HR to PPM
Advanced Availability Transfer Transfer absences from HR to PPM A PLM Consulting Solution Public Advanced Availability Transfer With this solution you can include individual absences and attendances from
Mehrdrähte litzen schläuche magnet wires litz wires sleevings
DE EN Neu New 2017/18 Ausgabe 1 Edition 1 drähte litzen schläuche magnet wires litz wires sleevings Kupferdrähte, Kupferlitzen, Widerstandsdrähte, Schläuche Copper wires, copper litz wires, resistance
MehrOverview thermostat/ temperature controller
Thermostat TR-238 The Thermostat TR-238 is a electronic two-level controller for controlling of and in climate control units and vehicles. Voltage range (12V): Voltage range (24V): Control range: Hystereses:
MehrZöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series.
BEARINGS A L L FOR B E YOUR A R IFUTURE N G S 1 Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series Zen Ball Bearings are manufactured to the highest quality for standard
MehrGasring-Vakuumpumpen/- Ersatzteilliste Kompressoren Spare part list Serie/Series G-BH7
Gasring-Vakuumpumpen/- Kompressoren Ersatzteilliste Spare part list Serie/Series G-BH7 Typ / Type 2BH7 Gardner Denver Deutschland GmbH Postfach 1510 97605 Bad Neustadt / Saale Germany Tel.: +49 7622 392
MehrWiegen / Balance 6.01. Inhaltsübersicht Contents Seite / Page
6 Wiegen / Balance Inhaltsübersicht Contents Seite / Page l 6.1 Taschenwaage l 6.2 Präzisionswaagen l 6.3 Plattformwaagen l 6.4 Analysewaagen l 6.5 Tischwaagen l 6.6 Bodenwaagen l 6.7 Feuchtebestimmer
MehrVandal resistant switch MCS 19
Product manual Vandal resistant switch MCS 19 CONTENT 1. DESCRIPTION 1.1 Zinc diecasting 1.2 Stainless steel 1.3 Varnished 2. DATA AND DIMENSIONAL DRAWINGS 2.1 Technical data 2.2 Component dimensions non-illuminated
MehrAderendhülsen Ferrules
Aderendhülsen Ferrules Zoller + Fröhlich ist Erfinder der Aderendhülsen mit Kunststoffkragen. Alle Aderendhülsen werden ausschließlich am Firmenstammsitz in Wangen im Allgäu gefertigt. Z+F Aderendhülsen
MehrRohrkupplungen und Fittings Tube couplings and fittings
Rohrkupplungen und Fittings Tube couplings and fittings Rohrkupplung Tube coupling Rohrenden Tube ends Rohr Tube Rohr Tube Einsatzgebiete Die Rohrkupplungen werden insbesondere bei Förder- und Produktionsanlagen
Mehr