2.1 Steril-Verschraubung STERI-Connect aseptic screwed pipe connection
|
|
- Laura Julia Hausler
- vor 7 Jahren
- Abrufe
Transkript
1 2.1 Steril-Verschraubung STERI-Connect aseptic screwed pipe connection Legende A Außendurchmesser B Innendurchmesser C Gesamtlänge D größter Außendurchmesser D1 Innendurchmesser (Nutmutter) E (metrisches) Gewinde SW Schlüsselweite en A ( 11850) B (EN 1127) auf Anfrage: C (ASME BPE) Normative Verweisungen, Anforderungen / Abnahmen (Vormaterial) BN2 EN /-3 EN EN (Rohlinge) EN (Rohlinge) EN ASTM A276 ASTM A182/A182M / ASME SA182/SA182M ASTM A479/A479M / ASME SA479/SA479M ASME SA336 (Rohlinge) AD 2000-W2 Kennzeichnung Hersteller, Werkstoff,, Schmelze, STERI-Connect Key external diameter internal diameter total length biggest external diameter internal diameter (nut) (metric) thread width across flats (A/F) Dimensions A ( 11850) B (EN 1127) on request: C (ASME BPE) Normative References, Requirements / Approvals (raw material) BN2 EN /-3 EN EN (forgings) EN (forgings) EN ASTM A276 ASTM A182/A182M / ASME SA182/SA182M ASTM A479/A479M / ASME SA479/SA479M ASME SA336 (forgings) AD 2000-W2 Marking manufacturer, material,, heat, STERI-Connect Toleranzen (Bezugsnorm) Tolerances (reference standard) Verpackung Schweißenden mit Kunststoffkappen verschlossen, einzeln verpackt. Werkstoffe (mediumberührt) /07 (nicht mediumberührt) EPDM (Standard) weitere Werkstoffe auf Anfrage Oberflächenbeschaffenheit ( ) innen: feinstgedreht, Ra < 0.8 µm außen: feingedreht, Ra < 1.6 µm Packaging Welding ends covered with plastic caps, wrapped separately. Materials 316L (at medium contact surface) 304 (not at medium contact surface) EPDM (standard) further materials on request Surface condition ( ) inside: ultra-fine turned, Ra < 0.8 µm outside: refined turned, Ra < 1.6 µm Oberflächenqualitäten surface qualities Innenoberfl äche internal surface fi nish (Zusatz-) Artikel-Nr. (additional) order No Bestellbeispiel ordering example Artikelbezeichnung + Ausführungen article description + variants Artikel-Nr. order No e-poliert e-polished Steril-Verschraubung STERI Connect DN025 aseptic screwed pipe connection (, EPDM) Ra < 0.6 µm (STERI-line ) Ra < 0.5 µm (STERI-line ) Ra < 0.4 µm (HQ-line ) Ra < 0.25 µm (HQ-line ) e-poliert e-polished Ra < 0.25 µm Zubehör ab Seite 73 accessories from page 73 on 7
2 2.1.1 Steril-Verschraubung STERI-Connect weitere en auf Anfrage further s on request A B C D E DN x SW19 16 x DN x SW22 18 x DN x SW27 22 x DN x SW27 22 x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x A B C D E DN x SW27 22 x DN x SW30 26 x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x
3 2.1.2 Steril-Gewindestutzen STERI-Connect aseptic threaded connecting piece (male part) weitere en auf Anfrage further s on request A B C E DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x A B C E DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x
4 aseptic liner Steril-Bundstutzen STERI-Connect weitere en auf Anfrage further s on request A B C D DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x A B C D DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x
5 2.1.4 Steril-Blindgewindestutzen STERI-Connect aseptic blind threaded connecting piece (male part) weitere en auf Anfrage further s on request A C E SW DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x A C E SW DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x
6 aseptic blind liner Steril-Blindbundstutzen STERI-Connect weitere en auf Anfrage further s on request A C D DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x A C D DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x DN x
7 2.1.6 Steril-Nutmutter STERI-Connect aseptic nut C D D1 E weitere en auf Anfrage further s on request / DN x SW x DN x SW x DN x SW x DN x SW x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x C D D1 E / DN x SW x DN x SW x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x DN x x
2.2 S Steril-Verschraubung DIN A aseptic screwed pipe connection
2.2 S Steril-Verschraubung 11864-1-A aseptic screwed pipe connection Legende A Außendurchmesser B Innendurchmesser C Gesamtlänge D größter Außendurchmesser D1 Innendurchmesser (Nutmutter) E (Rund-) Gewinde
Mehr2.4 S Steril-Flanschverbindung DIN 11864-2-A
2.4 S Steril-Flanschverbindung 11864-2-A aseptic flange connection Legende A Außendurchmesser B Innendurchmesser C Gesamtlänge D Flansch-Außendurchmesser LK Lochkreis en 11866-A ( 11850) 11866-B (EN 1127)
Mehr2.7 Clampverbindung DIN 32676
2.7 lampverbindung DIN 32676 clamp connection Legende A B E Außendurchmesser Innendurchmesser Gesamtlänge (lamp-) Flansch-Außendurchmesser en DIN 11866-A (DIN 11850) DIN 11866-B (EN 1127) DIN 11866- (ASME
Mehr5.1 STERI-T / HQ-T DIN 11865-T 109 5.4 STERI-TKR / HQ-TKR DIN 11865-TK 118 5.5 MEDI-T DIN 11852-TS 122 5.6 MEDI-TK DIN 11852-TK 124
5. T- / Kreuz-Stücke Tees / Cross pieces Seite page 5.1 STERI-T / HQ-T -T 109 Steril T-Stück -lang/egalaseptic tee -long/equal- 5.2 STERI-TK / HQ-TK -TK 111 Steril T-Stück -kurz/egalaseptic tee -short/equal-
MehrEdelstahl - DIN 11864
Edelstahl - DIN 11864 [3. Neuauflage] Ein Unternehmen der NEUMO-EHRENBERG -GRUPPE Explosionszeichnungen Rohrverschraubung Gewindestutzen Male part O-Ring Seal ring Nutmutter Nut Bundstutzen Liner Flanschverbindung
MehrKomponenten aus Edelstahl & Glas Ihr zuverlässiger Partner für Systemkomponenten
asepteh components for hygienic processing Ihre Vorteile Hohe Prozess- und Produktsicherheit für Ihre nlagen durch QHD-zertifizierte Komponenten, Einhaltung der GMP-/FD-Kriterien, innovative Problemlösungen
MehrM&S Armaturen was established in January 1983. Die M&S Armaturen GmbH wurde im Januar 1983 gegründet.
M&S Armaturen GmbH, Friedeburg Die M&S Armaturen GmbH wurde im Januar 983 gegründet. Die M&S Armaturen GmbH produziert Armaturen sowie Sonderteile aller Art aus Edelstahl für die Lebensmittelindustrie,
MehrDistanzmontageteilen. Distance rolls
Distanzmontageteile Distance rolls Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical
MehrL I E F E R P R O G R A M M
E D E L S T A H L L I E F E R P R O G R A M M Edelstahlrohre Geschweißte Rohre Konstruktionsrohre Getränkeleitungsrohre Gas- und Trinkwasserinstallationsrohre Vierkantrohre Rechteckrohre Nahtlose Edelstahlrohre
Mehr3.4. ATEX Kabelverschraubungen ATEX Zubehör. ATEX Cable glands ATEX Accessories. page ATEX Cable glands Plastic PA 102-112
3.3 100 ATEX Kabelverschraubungen ATEX Zubehör Seite ATEX Kabelverschraubungen Kunststoff PA 102-112 S-TEC Ex e / Ex i 102-104 WADI-TEC Ex e 105-112 ATEX s ATEX Accessories page ATEX s Plastic PA 102-112
MehrLehren / gauges. Grenzlehrdorne limit plug gauges. Flache Grenzlochlehre flat internal plug gauges
Lehren / gauges Grenzlehrdorne limit plug gauges 2248 / 2249 Dimensions according to DIN 2245 / 2246 / 2247 / 2248 / 2249 according to DIN 286 Nominal sizes 0,5 mm - 100 mm stahl, gehärtet, feinstgeschliffen
MehrWinkel + Flansche 9Angles + Flanges
Winkel + Flansche 9Angles + Flanges Winkel + Flansche/Angels + Flanges 367 Damit es sicher um die Ecke geht Turning the corner safely 1 2 368 Winkel + Flansche/Angels + Flanges Praktische Winkelverschraubungen
MehrLänge L Artikel.-Nr. 8 100 H11008 8 200 H10951 8 300 H10954 8 400 H11009 8 500 H11010 8 600 H11011 8 800 H11012 8 1000 H11013
V.14.1 Säulen leg special M5x0.8-6H L d d Länge L Artikel.-Nr. length L 8 100 H11008 8 200 H10951 8 300 H10954 8 400 H11009 8 500 H11010 8 600 H11011 8 800 H11012 8 1000 H11013 100 K 0135 A V.14.2 Fußplatten
MehrStainless steel flat products. Flacherzeugnisse aus rostfreiem Stahl
St ai nl es ss t eel atpr oduc t s Moving ahead in the stainless sector. Within a strategy of consistent investments in its production chain, Marcegaglia has added the manufacturing of coils and sheets
MehrLeister SYSTEM SINGLE PATCH MODULE SPM 01
D GB Leister SYSTEM SINGLE PATCH MODULE SPM 01 Leister Process Technologies Galileo-Strasse 10 CH-05 Kaegiswil/Switzerland Tel. +41-41 4 4 Fax +41-41 4 1 www.leister.com sales@leister.com Einbauanleitung
MehrMessanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P
Messanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P Beispiele Examples Behälter/vessel Nummer Art der Messung offen geschl. Messumformertyp Medium number kind of measurement
MehrZementierte Drahtwiderstände Cement-coated wire wound resistors / Résistances bobinées cimentées R39-18K 3,7 W 7,3 W 9,5 W 2,9 W 6,0 W 8,1 W
Cement Cementcoated wire wound resistors / Résistances bobinées cimentées mit zwei oder mehr Fahnenanschlüssen Bauform Style Modèle Widerstandswertbereich Resistance range Plage de valeurs WiderstandswertToleranzen
MehrArmaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts made of stainless steel. www.ms-armaturen.
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts made of stainless steel www.ms-armaturen.de ASEPTIK-KOMPONENTEN ASEPTIC COMPONENTS UBERSICHT OVERVIEW Die M&S Armaturen GmbH wurde
MehrHF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
MehrSORTIMENTE ASSORTMENTS
SORTIMENTE ASSORTMENTS Maschinen- und Handgewinde Machine- and manual operation Maschinengewinde Machine operation EXACT EVENTUS 221 222 by EXACT Handgewinde Hand operation fein BSW BSP (G) UNC UNF Gewindereparatur
MehrGetränkeleitungsfittings food/sanitary fittings. Schweißfittings Butt weld fittings. Gew. Pres. Arm. Armaturen Valves. Flansche flanges.
Verb i n du ngen Fü r edelstah l Co n n e C t i n g l i n k s f o r sta i n l e s s st e e l Getränkeleitungsfittings food/sanitary fittings Schweißfittings Butt weld fittings Gew Gewindefittings screwed
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Steckverbinder für PV-Systeme, AC-Anwendung (COC) Connector for PV-Systems,
MehrZubehör Accessories Accessoires
Seite Page Page 14/2 DA 14/4 Allgemeine Merkmale Drehantrieb General parameters Rotary drive unit Caractéristiques générales Servomoteur rotatif + 16 Zubehör Accessories Accessoires 14/0 Drehantrieb Rotary
MehrFAI. Führungsring mit Abstreiffunktion Bearing Ring with Wiping Function innenführend / inside bearing
Führungsring mit Abstreiffunktion Führungsring mit Abstreiffunktion, innenführend Bearing Ring with Wiping Function, inside bearing Der Hunger Führungsring mit Abstreiffunktion dient als vorderste Führung
MehrKonvertierungstabellen Normen
Normen DIN EN ISO 1127 DIN 2391 DIN EN 13480-3 DIN 2559 Nichtrostende Stahlrohre Maße, Grenzabmaße und längenbezogene Masse Nahtlose Präzisionsstahlrohre (Diese Norm gilt an sich nur für unlegierte Stähle.
MehrDie flexible Gehäuseserie als 19-Zoll-Volleinschub oder Desktop-Ausführung. The flexible case series as a 19-inch plug-in box or desktop version.
MGS - superior Gehäuse Serie MGS-superior modular case series MGS-superior Die flexible Gehäuseserie als 9-Zoll-Volleinschub oder Desktop-Ausführung. The flexible case series as a 9-inch plug-in box or
MehrPreisliste A ntrie bsrie m e n Price List Drive B elts > > > Teuerungszuschlag. Surcharge. Gültig ab 01. 04. 2011 Effective from 1 st April 2011
Teuerungszuschlag Surcharge Industrie-Riemen Industrial Belts 4,6 % gültig ab 1. April 2011 effective from 1 st April 2011 % Preisliste A ntrie bsrie m e n Price List Drive B elts > > > Gültig ab 01. 04.
MehrDichtkegel-Verschraubungen mit 24 -Kegel und O-Ring Viton. Cone Sealing Couplings with 24 -Cone and O-ring Viton
Dichtkegel-Verschraubungen mit 24 -Kegel und O-Ring Viton Cone Sealing Couplings with 24 -Cone and O-ring Viton 9 DICHTKEEL-VERSCHRAUBUNEN MIT 24 -KEEL UND O-RIN - VITON - DIN EN ISO 8434-1 CONE SEALIN
MehrCERTIFICATE. The Certification Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Certification Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that North American Stainless 6870 Highway 42 East Ghent, KY 41045-9615 USA has implemented, operates and maintains
MehrStandard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA
Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA Lagerprogramm Stock Programme Inhalt Kettenradscheiben und Kettenräder - en von 6 mm bis 50,8
MehrDear Colleague, Please give us a call and let us know how we can assist you. We look forward to talking to you soon. Thank you.
Dear Colleague, Thank you for visiting our website and downloading a product catalog from the R.M. Hoffman Company. We hope this information will be useful to you in solving the application you are working
MehrEN ISO Sechskantschrauben mit Gewinde bis Kopf Produktklassen A und B. Hexagon head screws Product grades A and B (ISO 4017:2011)
ÖNORM EN ISO 4017 Ausgabe: 2011-07-01 Sechskantschrauben mit Gewinde bis Kopf Produktklassen A und B Hexagon head screws Product grades A and B Vis à tête hexagonale entièrement filetées Grades A et B
MehrTDMI. Tandem-Dichtsatz für Multimedieneinsatz, Tandem Seal for Multi-fluid Application innendichtend / inside sealing
Tandem-Dichtsatz für Multimedieneinsatz Tandem-Dichtsatz für Multimedieneinsatz, innendichtend Der Hunger Tandem-Dichtsatz für Multimedieneinsatz, innendichtend, wird zur Abdichtung von Plungerkolben oder
MehrWerkspreisliste für nahtlose nichtrostende und hitzebeständige Edelstahlrohre Ausgabe 01. Juli 2014
Werkspreisliste für nahtlose nichtrostende und hitzebeständige Edelstahlrohre Ausgabe 01. Juli 2014 Price list for seamless stainless and heat resistant steel tubes and pipes Edition July 1 st, 2014 Inhaltsverzeichnis
MehrTECHNICAL CATALOG TECHNISCHER KATALOG
TECHNICAL CATALOG TECHNISCHER KATALOG Specifications and Dimensions Spezifikationen und Abmessungen CONTENT INHALT PAGE SEITE DESCRIPTION BESCHREIBUNG Specifications Spezifikationen SPECIFICATIONS SPEZIFIKATIONEN
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Verdrahtungskanal zum Einbau in Schaltschränken Slotted
MehrООО"МАШКОМПЛЕКТ" Перейти на сайт
!23'454'34.%&! $34B3$$2C43! 9/#/: ; 1%9: ;? 0%38! ООО"МАШКОМПЛЕКТ" Перейти на сайт www.bolt.msk.ru Inhalt Seite Vorwort... 3 1 Anwendungsbereich... 4 2 Normative Verweisungen... 4 3 Maßbuchstaben...
MehrTechnische Informationen technical informations
Technische Informationen technical informations Technische Informationen technical informations www.ms-armaturen.de Technische Informationen technical informations www.ms-armaturen.de Zertifizierungen
MehrLebensmittelfühler Food probes
Lebensmittelfühler werden u.a. in Brauereien, Molkereien, Keltereien und Käsereien sowie in der Biotechnologie und Pharmazie eingesetzt. Um den speziellen Bedürfnissen der Lebensmittel-, Getränke- und
MehrEMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
MehrGewinde - Kernloch-Ø und Kern-Ø Muttergewinde Drill-Ø for Threads and Minor-Ø of Nut Threads
Drill-Ø for Threads and of s M Metr. ISO - Regelgewinde, 6H (5H) 1) Metric ISO - Coarse Thread 6H (5H) P Ø M 1 0,25 0,75 0,729 0,785 M 1,1 0,25 0,85 0,829 0,885 M 1,2 0,25 0,95 0,929 0,985 M 1,4 0,3 1,10
MehrInstallation Aufbau Feld
Installation Aufbau Feld xenergy Field Feld: 2000x800x800 Mounting kit Einbausatz: XTMPIX40FM-H550W800 IZMX40 3-pole IZMX40 3-polig Current Rating Bemessungsstrom (I): 4000A Busbar material Material der
Mehroptibelt CP Spannplatten Clamping Plates
optibelt CP Spannplatten Clamping Plates Artikel- Teilung Pitch t Riemenbreite Belt width b Material B a L e H d CP-XL 025 5,080 6,35 Al 25,5 6,0 42,5 3,5 8,0 5,5 0,020 CP-XL 037 5,080 9,53 Al 28,5 6,0
MehrSchweißfittings. Welding Fittings
Schweißfittings Welding Fittings Index Bogen, nahtlos ab Seite 49 Seamless elbows from Page 49 Bogen, geschweißt ab Seite 50 Welded elbows from Page 50 Einnahtbogen ab Seite 57 Elbow from Page 57 Zweischalenbogen
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. PV-Anschlussdose PV-Connection box Typ(en) / Type(s): 740-00115 (Engage Coupler)
MehrWillkommen beim MSB-Messeservice. Welcome to the MSB fair service. Beleuchtung Lighting. Traversen Trusses. Traversen Trusses
Willkommen beim MSB-Messeservice Auf den folgenden Seiten finden Sie einen speziell für Aussteller zusammengestelltes Serviceangebot. Von der leichten Dreipunkt-Messetraverse bis hin zu Hochleistungstraversen
MehrMagnetventilsteckverbinder Bauform A Solenoid valve connectors size A
BF-C BF-B BF-A 7/8 M8 M-US M-T M-S M-D M-B Verteiler VL M8 M5 RD0 RD4 M5 Bajonett M M6 IP67 M6 IP40 PP IP67 NCC Bajonett SI IP67 M9 IP67 M9 IP40 PP IP67 MPP IP67 Bajonett SI IP67 SI IP40 Magnetventilsteckverbinder
MehrDie lieferbaren Rohre finden in einer Vielzahl von Industrien und Einsatzgebieten Verwendung. Nachstehend nur eine beispielhafte Auflistung:
Firmeninfo Als österreichisches Handelsunternehmen haben wir uns auf die Beschaffung von Stahlrohren für unsere Kunden in Europa und Südamerika spezialisiert. Durch enge Zusammenarbeit mit Herstellern
MehrSCHOCH EDELSTAHL. Flansche DIN/ASME. Werkstoffe 1.4571-1.4541-1.4301
SCHOCH EDELSTAHL Flansche DIN/ASME Werkstoffe 1.4571-1.4541-1.4301 Das SCHOCH EDELSTAHL-Programm im Überblick The SCHOCH EDELSTAHL Programm La gamme SCHOCH EDELSTAHL Bitte anfordern! Please ask for information!
Mehr4 NEW COATINGS FOR TWEEZERS
Auszug aus unsere Preisliste - Seite 1 4 NEW COATINGS FOR TWEEZERS HTC Suffix -HTC High temperature Coating Resistance up to 620 C / 1150 BLACK EPOXY Suffix -EX Epoxy Coating 5 Mil. TEFLON Suffix -TE Temperature
MehrOrder Number Bestellnummer. Hand crimp tool Handcrimpzange Positioner Einsatz Positioner Einsatz. Order Number. Bestellnummer
Crimpingtools for Miniature Connectors Crimpwerkzeuge für Miniatursteckverbinder Hand Crimp Tool M22520/2-01 for Machined Contacts Handcrimpzange M22520/2-01 für gedrehte Kontakte Die / Einsatz Hand crimp
Mehrhand-augenduschen mit einem geraden brausekopf hand-held eye showers with one straight spray head
augenduschen ClassicLine hand-augenduschen mit einem geraden brausekopf hand-held eye showers with one straight spray head Material: Kunststoff, Messing, chemikalienbeständig pulverbeschichtet Farbe: grau,
MehrDEUTSCHE NORM DIN EN ISO 4762. Zylinderschrauben mit Innensechskant (ISO 4762:2004); Deutsche Fassung EN ISO 4762:2004
DEUTSCHE NORM DIN EN ISO 4762 X Juni 2004 ICS 21.060.10 Ersatz für DIN EN ISO 4762:1998-02 Zylinderschrauben mit Innensechskant (ISO 4762:2004); Deutsche Fassung EN ISO 4762:2004 Hexagon socket head cap
MehrDichtstopfen. Sealing plugs.
Dichtstopfen Sealing plugs www.marktech.at Wir verbinden kreative Lösungen mit präziser technischer Umsetzung und bilden so die Schnittstelle zwischen Innovation, Produktion und Vertrieb. We combine creative
MehrFLANSCHE Flanges. Prirubnice
FLANSCHE Flanges Prirubnice Lochbild und Anschlussmaße nach Hole pattern and the connecting dimensions to SAE J 518 C, ISO 6162-1/2 Flansche und Zubehör Flanges and accessories Material: Stahl / Steel
MehrHERMANN SCHMIDT. Katalog Preisliste 2012 Edelstahl-Gewindefittings. Catalogue Price List 2012 Stainless Steel Threaded Fittings
HERMANN SCHMIDT Katalog Preisliste 12 Edelstahl-Gewindefittings Catalogue Price List 12 Stainless Steel Threaded Fittings 1 HS Edelstahlfittings mit Gewinde Edelstahlgewindefittings aus Werkstoff V4A/1.4436
MehrSterilblockflansche. Typ BBS-10 Rückschlagventil. Technische Daten Verfügbare Standardgrößen. Material mediumberührt
Sterilblockflansche Hygienic Processing Komponenten... Optimiertes esign gemäss den Empfehlungen der ASE BPE Bioprocess Richtlinien Garantiert spaltfrei Alle produktberührten aterialen rückverfolgbar Bestandteil
Mehrprotection tubes & sensors for thermostats
Hauptmerkmale Caractères distinctifs Main characteristics Schutzrohr: Anwendung: für Gase thermostat Doigt de gant: Application: pour gaz thermostat Measuring range: Application: for gases thermostat Schutzrohre
MehrInstallation guide for Cloud and Square
Installation guide for Cloud and Square 1. Scope of delivery 1.1 Baffle tile package and ceiling construction - 13 pcs. of baffles - Sub construction - 4 pcs. of distance tubes white (for direct mounting)
MehrSupplier Questionnaire
Supplier Questionnaire Dear madam, dear sir, We would like to add your company to our list of suppliers. Our company serves the defence industry and fills orders for replacement parts, including orders
MehrMessuhren Indicators 49 ASIMETO EUROPE CATALOG 1305
Messuhren Indicators 51 IP 67 digitale Messuhren / IP67 Digital Indicators 52 Digitale-Messuhren / Digital Indicators 53 AGD2 Präzisions-Messuhren / AGD2 Dial Indicators 54 Fühlhebelmessgerät / Dial Test
MehrBENCH das System für große Tischplatten BENCH the System for large desk tops BENCH - le systeme pour grands plateaux de table
Gestellprogramm work station systems Programme de piétements BENCH das System für große Tischplatten BENCH the System for large desk tops BENCH - le systeme pour grands plateaux de table Gestellprogramm
MehrSight glasses pressure tight - leak proof - simple assembly - reliable. Schaugläser Druckfest - Vakuum dicht - Montage fertig - Betriebssicher
Sight glasses pressure tight - leak proof - simple assembly - reliable Schaugläser Druckfest - Vakuum dicht - Montage fertig - Betriebssicher Sight glasses for high-pressure or vacuum applications Hermetic
MehrMessanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P
Messanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P Beispiele Examples Behälter/vessel Nummer Art der Messung offen geschl. Messumformertyp Medium number kind of measurement
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Anbauleuchte für Leuchtdioden (LED) Built-on luminaire
MehrHochstrom-Druckkontakte für Dauerströme bis 400 A. High Current Probes up to 400 amps cont. Ausgabe 7/2009 DE EN. Edition 7/2009 DE EN
Hochstrom-Druckkontakte für Dauerströme bis 400 usgabe 7/2009 DE EN High Current Probes up to 400 amps cont. Edition 7/2009 DE EN Impressum und Bestellhinweise Company and Ordering Information Unsere
MehrA BAYİİ YENİ BAYİLİKLERİMİZ BAYİLİKLERİMİZ. Sipariş Hattı: 0212 222 00 61-0216 660 16 16
84 MART 201 YETKİLİ ANKA AN YENİ BAYİLİKLERİMİZ BAYİLİKLERİMİZ Sipariş Hattı: 0212 222 00 61-0216 660 16 16 A BAYİİ MART 201 8 Kablo Rakor Sistemleri Blueglobe Poliamid (PA) Rakor Açıklama Sipariş Kodu
MehrNARZYNKI SCREWING DIES SCHNEIDEISEN UNC UNF BSW BSF NPT. Strona Page Seite 106 DIN-EN HSS, LH HSS, HSSE
NARZYNKI M DINEN, LH, E SCREWING DIES SCHNEIDEISEN SN INOX Ms Strona age Seite ~DINEN D, D Do zestawów / For tool sets / Für Schneidwerkzeugsätze NHMg Narzynki automatowe / Acorn dies / GlockenSchneideisen
MehrGewinde- Sicherheits- / Entlastungsventile, in Eckform Thread Safety- / Relief-Valves, right angle
1 2 3 4 5 6 7 8 9 10 11 12 13 Kundeninformationen, Produktübersicht Customer information, Product Range Verkaufsbedingungen Terms of delivery and sale Gewinde- Sicherheits- / Entlastungsventile, in Eckform
MehrServiceinformation Nr. 05/10
Serviceinformation Nr. 05/10 vom: 05.08.2010 von: GRC 1. Strömungswächter für Grundwasseranlagen Ab sofort können anstelle der Seikom Strömungswächter GF Schwebekörper Durchflussmesser mit Reed Kontakt
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Durchflußerwärmer, geschlossen Instantaneous water heater,
MehrLötfreie Kabelverbindungen Aderendhülsen und Crimpkontakte Solderless Cable Connections End Sleeves and Crimp Terminals
Lötfreie Kabelverbindungen Aderendhülsen und Crimpkontakte Solderless Cable Connections End Sleeves and Crimp Terminals 2 Lötfreie Kabelverbindungen Solderless cable Cable connections Connections Crimpkontakte,
MehrODU AMC. Montageanleitung ODU AMC Abreiss-Kabelstecker. Montageanleitung. www.odu.de. Stecker
ODU AMC Abreiss-Kabelstecker Stecker Schirmhülse Crimphülse 1. Crimphülse und Schirmhülse über das Kabel schieben. Bei Verwen dung eines Metallbandes zur Schirmbefestigung auf der Schirmhülse wird die
MehrPLANT SAFETY IS JUST A QUESTION OF PROPER TECHNOLOGY. Safe-Ring. The ange guard with diffuser and snap-lock
PLANT SAFETY IS JUST A QUESTION OF PROPER TECHNOLOGY Safe-Ring. The ange guard with diffuser and snap-lok A spray protetion ring for ange onnetions, whih intelligently ombines priniples of uid dynamis
MehrFastener Industry Food industry Pharmaceutical industry Fastener ASME BPE Standard ASME BPE CLAMP Unions SHORT CLAMP WELDING FERRULES {INCLUDEPICTUREW
Visserie Industrie Agro-Alimentaire Pharmaceutique Visserie www.fginox.fr Gamme ASME BPE Raccords CLAMP ASME BPE Ferrules CLAMP courtes $)A ($ souder {INCLUDEPICTUREW:\\FGI_MKG_Marketing\\MULTILANGUE\\PHOTO
MehrOBERFLÄCHENRISS-PROTOKOLL surface crack examination record. Impeller, part 3 Ø 488/290 x 126,5 mm Mustermannstr. 1 D-12345 Musterhausen
PT-Bl.1/Rev. 4/15.9.28(OH) OBERFLÄCHENRISS-PROTOKOLL surface crack examination record PROTOKOLL-NR.: 1 5 Moselstraße 29 ; 51371 Leverkusen ; Germany Inspection certificate after DIN EN 1 24, 3.1 sheet
Mehroptibelt Super X-POWER M=S Schmalkeilriemen flankenoffen, formgezahnt Moulded Cogged, Raw Edge Wedge Belts Profil Profile XPZ / 3VX
XPZ Profil Profile XPZ / 3VX Riemenbezeichnung USA Standard BM BQ = 25 Stück pieces 587 8,90 612 8,90 630 3VX 250 9,00 637 9,00 662 9,00 670 3VX 265 9,00 687 9,00 710 3VX 280 9,00 730 9,00 737 9,00 750
MehrDurchführungskondensatoren mit Anschlußdraht Feedthrough capacitors with pin. Baureihe / Series
Durchführungskondensatoren mit Anschlußdraht Feedthrough capacitors with pin Baureihe / Series BDBQ 3-01 2709 BUBQ 5-00 2701 BDBQ 5-00 2701 BDBQ 5-12 2701 BDBQ 5-02 2701 LUEQ 6-01 2703 LDEQ 6-01 2703 DDMN
MehrPreisliste 2004 Gewindefittings Pricelist Threaded fittings
Preisliste 2004 Gewindefittings Pricelist Threaded fittings Edelstahlservice Sulz garantiert Lieferung innerhalb von 24 Stunden aus unserem großen neuen Hochregallager in Sulz a.neckar. Auf über 10000
MehrUFSK INTERNATIONAL Hermann Scherrieble Kirchhoffstr. 2 93055 Regensburg Germany. Phone: +49 (0)941 / 788 62-0 Fax: +49 (0)941 / 788 62-18
Mortuary refrigeration units from stable, self-supporting elements in sandwich structure, from 80 mm strong CFC free foamed polyurethane rigid foam. Surface inside and outside from steel sheet (standard
MehrLOG IN TRIMLESS CARDI BELYSNING VALHALLAVÄGEN 8 114 22 STOCKHOLM 08 442 94 00 WWW.CARDI.SE INFO@CARDI.SE
134 LOG IN TRIMLESS 135 L 52 90 ET 90 60 20W LED LED 20W 220-240V AC/DC CRI >80 Binning SDCM 3 mp: 3000K = 1695 lm / 4000K = 1795 lm pm: 3000K = 1525 lm / 4000K = 1615 lm 528-50298.. AE W3 L: 870mm 528-502108..
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with
MehrAusgleichshalter / Compensation Holder
usgleichshalter / Compensation Holder usgleichshalter Produkt-Eigenschaften: usgleichshalter für HSK und SK Für Werkzeuge mit Weldon Spanfläche Produkt-Vorteile: Korrektur von Rundlauffehler und chsfehler
MehrDokumentation. Schnellentlüftungsventile - Typ SE..., SV..., SE... ESG, SE... K ES -
Dokumentation - Typ SE..., SV..., SE... ESG, SE... K ES - Stand: 03/2014 Dokumentation 1. Inhalt 1. Inhaltsverzeichnis....................................................................................................
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... Zubehör für Netzgeräte ccessories for power supplies Mehrfach isolierte Wickeldrähte Multiple
MehrTERA-Drill. Standard Range. Standardprogramm
TERA-Drill Standardprogramm Standard Range Zerspanungswerkzeuge Sondermaschinen Messtechnik Cutting Tools Special Mechanical Engineering Measurement Equipment BLICKLE Werkzeuge GmbH & Co. KG Ölbergstr.
MehrB81133 X2 MKT/SH 40/100/21/C B81133 X2 MKT/SH 40/100/21/C. EMI Suppression Capacitors X2 / 275 Vac Not for new design
EMI Suppression Capacitors X2 / X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz 1) Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy
MehrRECKMANN GMBH MESS + REGELTECHNIK
REKMNN GMH MESS + REGELTEHNIK Messeinsätze für Widerstandsthermometer und für Thermoelemente Measuring Inserts for Resistance Thermometers and Thermocouple ssemblies 25 REKMNN GMH MESS + REGELTEHNIK erechnung
Mehrpremium carbide cutting tools Dümmel WERKZEUGFABRIK
premium carbide cutting tools Dümmel WERKZEUGFABRIK Dümmel WERKZEUGFABRIK Inhalt Seite Zerspanungswerkzeuge vom Feinsten Contents premium carbide cutting tools page Bohrungsbearbeitung ab Ø mm grooving,
Mehr1 COMMERCIAL & INDUSTRIAL FILTER TANKS
1 COMMERCIAL & INDUSTRIAL FILTER TANKS COMMERCIAL FILTER TANKS mit BASE / FUSS oben: Gewinde 2 ½ -8NPSM or 4-8UN Art.Nr. Typ Volumen Durchmesser D Höhe A Base B 415 100 6 x 13 4,3 156 332 ± 4 164 2 ½ 415
MehrProduct Tested Version Release List Annex to certificate Tyco Electronics Austria GmbH Certificate No.: 968/EL 350.06/13
Certificate No.: 968/EL 350.06/13 Beschreibung des Typenschlüssels für SR6 / Description of the Type Nomenclature SR6 Beispiel: Example: I II III I Grundtype Basic series Ausführung ersion Kontaktausführung
MehrS-AUTOMATIK 64 Art.-Nr. / Item no S-MANUALE 64 Art.-Nr. / Item no
S-AUTOMATIK 64 Art.-Nr. / Item no. 89150 S-MANUALE 64 Art.-Nr. / Item no. 89100 Ersatzteile / Spare parts Ed. 07/2015 Drawing 01 Pos. Artikelnr./ item nr. Bezeichnung Tabelle 1 / Table 1 - Mühle S-Automatik
MehrINHALTSVERZEICHNIS INDEX
INHALTSVERZEICHNIS INDEX Passscheiben nach DIN 988 / shim washers DIN 988 DIN 988 Stahl DC01 (ST2K50) / DIN 988 steel DC01 (ST2K50)............................................................... 4-18 Stützscheiben
MehrVortrag IHK. CE Kennzeichnung von Medizinprodukten. Umsetzung der Dokumentation Thomas Bohnen 23.09.2015. 2010-2015 Qualitätsplan
Vortrag IHK CE Kennzeichnung von Medizinprodukten Umsetzung der Dokumentation Thomas Bohnen 23.09.2015 Agenda Vorstellung Inhalte der CE Akte logischer Zusammenhang Entwicklungsbegleitende Entstehung zeitlicher
MehrVG 30 / 55 II 2 G * * * Maßzeichnung / Dimensioned drawing. Daten und Maße / Data and dimensions. Anschlüsse / Connections
VG 3 / II G Maßzeichnung / Dimensioned drawing Daten und Maße / Data and dimensions Hz / cycles Hz / cycles Gewicht/Weight Anschlüsse / Connections Type BG/FS 1/min kw H 1/min kw H kg lbs U B U e U L VG
MehrZubehör für Werkzeughalter
... Zubehör für Werkzeughalter Accessories For Tool Holder EPPINGER EPPINGER... Zubehör für Werkzeughalter Accessories for Tool Holder Index Inhaltsverzeichnis Übersicht / Overview Gruppe Group Beschreibung
MehrEN ISO Sechskantschrauben mit Gewinde bis Kopf Produktklasse C. Vis à tête hexagonale entièrement filetées Grade C (ISO 4018:2011)
ÖNORM EN ISO 4018 Ausgabe: 2011-06-15 Sechskantschrauben mit Gewinde bis Kopf Produktklasse C Hexagon head screws Product grade C Vis à tête hexagonale entièrement filetées Grade C Medieninhaber und Hersteller
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Blankwiderstands-Durchflußerwärmer, geschlossen Bare Element
MehrGeben die Gewissheit, dass alles sitzt und passt.
VERBINUNGEN Flansche Geben die Gewissheit, dass alles sitzt und passt. 19 Temperaturbereich 19.1 Combiflex PU-Festflansch nach IN 2632/ -40 C bis +90 C 19.2 Combiflex PU-osflansch nach IN 2632/ -40 C bis
MehrKupfer-Dichtringe copper sealing rings
Kupfer-Dichtringe copper sealing rings Flachdichtringe Form A nach DIN 7603 Werkstoff: SF-Cu, auf eine Härte von max. 45 HB weichgeglüht Betriebstemperatur: nach DIN max. +300 C flat sealing rings form
Mehr