Rosenberger provides SMA, BNC and TNC reverse polarity connectors. Rosenberger bietet Reverse Polarity-Steckverbinder in den Serien SMA, BNC und TNC.
|
|
|
- Marta Brandt
- vor 7 Jahren
- Abrufe
Transkript
1 Reverse Polarity coaxial connectors are non-standardized versions of standard connector series: interfaces are similar to the standards, center contacts and dielectricum are reversed: male connectors would have female center contacts, female connectors would have male center contacts. Reverse polarity connectors are used for connecting W-LAN components. Reverse Polarity -Koaxial-Steckverbinder sind nicht genormte Versionen von Standard-Steckverbinder-Serien: Innenleiter und Dielektrika sind invers bestückt, d.h. Stecker haben einen Kuppler-Innenleiter und Kuppler einen Stecker-Innenleiter. Reverse Polarity Steckverbinder werden eingesetzt zum Verbinden von W-LAN-Komponenten. Rosenberger provides SMA, BNC and TNC reverse polarity connectors. Rosenberger bietet Reverse Polarity-Steckverbinder in den Serien SMA, BNC und TNC.
2 Reverse Polarity Connectors (SMA, BNC, TNC) Contents Reverse SMA Reverse BNC Reverse TNC Reverse Polarity Connectors
3 SMA Reverse 35SMA Reverse Interface Dimensions SMA Reverse Code 32R REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene N M A N K M H S R D E H E D F R S F G C B C B A MALE Stecker FEMALE Kuppler SMA Reverse Male Stecker Female Kuppler dimension [mm] min. max. min. max. A B C D E F G 0.38 H 1/4-36 UNS-2B 1/4-36 UNS-2A K 0.25 M N R S Features Interface according to Rosenberger Reverse SMA, FCC Standard Frequency range DC to 18 GHz Return loss (cable connector straight) 26 db (typ.) Impedance 50 Ω Screw-on coupling Product Range Cable connectors PCB connectors Panel connectors Further connectors available on request 336 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D Tittmoning, Tel , Fax ,
4 SMA Reverse Technology Technical Data SMA Reverse Code 32R Applicable standards Anwendbare Normen Interface according to Interface gemäß Quality tested according to Qualitätsprüfung gemäß Electrical data Elektrische Daten Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss (cable connector straight) Rückflussdämpfung (Kabelsteckverbinder gerade) Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Test voltage Prüfspannung Working voltage Betriebsspannung Power handling Leistungsbelastbarkeit Rf-leakage Schirmdämpfung Mechanical data Mechanische Daten Rosenberger SMA Reverse compliant with FCC standard (part 15, section ) derived from IEC , MIL-PRF-39012, EN MIL-STD Ω DC to 18 GHz 26 db (typ.) 0.1 x f(ghz) db 5 GΩ 3 mω 2 mω 1000 V rms 480 V rms GHz 100 DC to 1 GHz Mating cycles Steckzyklen 100 Coupling nut retention Überwurfmutter Haltekraft 180 N Center contact captivation Innenleiter Haltekraft axial: 20 N Coupling test torque Prüfdrehmoment 0.6 Nm Coupling torque recommeded Drehmoment empfohlen 0.5 Nm Environmental data Umweltdaten Temperature range Temperaturbereich -65 C to +165 C Thermal shock Temperaturzyklen MIL-STD-202, Method 107, Condition B Climatic category Klimakategorie IEC /165/21 Corrosion resistance Korrosionsbeständigkeit MIL-STD-202, Method 101, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106 Vibration Vibration MIL-STD-202, Method 204, Condition B Shock Schock MIL-STD-202, Method 213, Condition I Max. soldering temperature (PCB connectors) Max. Löttemperatur (Leiterplattensteckverbinder) IEC , +260 C for 10 sec. Materials Materialien Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Body Gehäuse Coupling nut Überwurfmutter Crimping ferrule Crimphülse Dielectric Dielektrikum Gasket Dichtung Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe, Au plating CuZn, Au plating CuZn, Au plating CuZn, Au plating CuZn, Au plating Copper alloy, Au plating PTFE Rubber Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. Reverse Polarity Connectors 337
5 SMA Reverse Cable Connectors Cable Connectors - Flexible Cables Straight Plug, solder-crimp xordering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit x32 RS L B5 11 W x32 RS L B5 11 W Flexible Cables 7 SW 8 x32 RS L B8 11 W x32 RS L B8 11 W SW 8 Right Angle Plug, solder-crimp xordering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit x32 RS L B6 11 W Flexible Cables SW Straight Panel Jack, solder-crimp, hexagonal flange xordering Number Version Cable Group Assembly Instruction Panel Piercing / PCB Layout Crimp Inserts x32 RK L5 rear mount B21 B W x32 RK L5 rear mount B21 B W Packing Unit Flexible Cables 7 SW 8 SW
6 SMA Reverse PCB Connectors PCB Connectors - solder pin Right Angle Jack xordering Number Panel Piercing / PCB Layout Packing Unit x32 RK L5 B 30B 200 blister 11.6 Solder pin Adaptors Adaptors Reverse Polarity Connectors Adaptors (Inter Series) xordering Number Version Remarks Packing Unit x32 RS 132-K00 L5 straight SMA reverse male - SMA Standard female SW8 SW5.5 x32 RK 132-S00 L5 straight SMA reverse female - SMA Standard male SW 5.5 SW 8 x32 RS 153-K00 N5 straight SMA reverse male - N Standard female 1 31 ø 16 SW8 339
7 BNC Reverse, 50 Ω 36BNC Reverse, 50 Ω Interface Dimensions BNC Reverse, 50 Ω Code 51R REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene G D F A E C B H B C E A K MALE Stecker J F FEMALE Kuppler BNC Reverse, 50 Ω Male Stecker Female Kuppler dimension [mm] min. max. min. max. A B 1) C D E 1) F G H J K 1) resilient, dimension to meet electrical and mechanical requirements 7.00 nom. Features Interface according to Rosenberger Reverse BNC, FCC Standard Frequency range DC to 10 GHz (max.), DC to 4 GHz (opt.) Return loss (cable connector straight) 20 db (typ.) Impedance 50 Ω Bayonet coupling Further connectors available on request 340 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D Tittmoning, Tel , Fax ,
8 BNC Reverse, 50 Ω Technology Technical Data BNC Reverse, 50 Ω Code 51R Applicable standards Anwendbare Normen Interface according to Interface gemäß Quality tested according to Qualitätsprüfung gemäß Electrical data Elektrische Daten Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss (cable connector straight) Rückflussdämpfung (Kabelsteckverbinder gerade) Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Test voltage Prüfspannung Working voltage Betriebsspannung Power handling Leistungsbelastbarkeit Mechanical data Mechanische Daten Rosenberger BNC Reverse compliant with FCC standard (part 15, section ) derived from IEC , MIL-PRF-39012, CECC MIL-STD Ω DC to 10 GHz (max.) DC to 4 GHz (opt.) 20 db (typ.) 0.1 x f(ghz) db 5 GΩ 1.5 mω 1 mω 1500 V rms 400 V rms 80 2 GHz Mating cycles Steckzyklen 500 Center contact captivation Innenleiter Haltekraft axial: 15 N Environmental data Umweltdaten Temperature range Temperaturbereich -65 C to +165 C Thermal shock Temperaturzyklen MIL-STD-202, Method 107, Condition B Climatic category Klimakategorie IEC /165/21 Corrosion resistance Korrosionsbeständigkeit MIL-STD-202, Method 101, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106 Vibration Vibration MIL-STD-202, Method 204, Condition B Shock Schock MIL-STD-202, Method 213, Condition G Max. soldering temperature (PCB connectors) Max. Löttemperatur (Leiterplattensteckverbinder) IEC , +260 C for 10 sec. Materials Materialien Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Crimping ferrule Crimphülse Dielectric Dielektrikum Gasket Dichtung Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe / CuSn, Au plating CuZn, Au plating CuZn, white bronze plating Copper alloy, white bronze plating PTFE Rubber Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. Reverse Polarity Connectors 341
9 BNC Reverse, 50 Ω Cable Connectors Cable Connectors - Flexible Cables Straight Plug, crimp xordering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit x51 RS N T 11 W x51 RS N T 11 W Flexible Cables 7 ø 14.6 x51 RS N P W x51 RS N P W x51 RS 107-1N8 N5 N8 51 P W ø 14.6 Panel Jack, crimp, hexagonal flange xordering Number Version Cable Group Assembly Instruction Panel Piercing / PCB Layout Crimp Inserts x51 RK N5 rear mount T B 3 11 W x51 RK N5 rear mount T B 3 11 W Packing Unit Flexible Cables 7 SW16 SW17 342
10 BNC Reverse, 50 Ω Adaptors Adaptors Adaptors (Inter Series) xordering Number Version Remarks Packing Unit x51 RS 153-K00 N5 straight BNC reverse male - N Standard female Reverse Polarity Connectors ø
11 TNC Reverse, 50 Ω 37TNC Reverse, 50 Ω Interface Dimensions TNC Reverse, 50 Ω Code 56R REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene G D H E A C B F F B C E A K MALE Stecker J H FEMALE Kuppler TNC Reverse, 50 Ω Male Stecker Female Kuppler dimension [mm] min. max. min. max. A B 1) C D E 1) F 7/16-28 UNEF-2B 7/16-28 UNEF-2A G H nom J K 7.00 nom. 1) resilient, dimension to meet electrical and mechanical requirements Features Interface according to Rosenberger Reverse TNC, FCC Standard Frequency range DC to 10 GHz (max.), DC to 4 GHz (opt.) Return loss (cable connector straight) 20 db (typ.) Impedance 50 Ω Screw-on coupling Further connectors available on request 344 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D Tittmoning, Tel , Fax ,
12 TNC Reverse, 50 Ω Technology Technical Data TNC Reverse, 50 Ω Code 56R Applicable standards Anwendbare Normen Interface according to Interface gemäß Quality tested according to Qualitätsprüfung gemäß Electrical data Elektrische Daten Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss (cable connector straight) Rückflussdämpfung (Kabelsteckverbinder gerade) Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Test voltage Prüfspannung Working voltage Betriebsspannung Power handling Leistungsbelastbarkeit Mechanical data Mechanische Daten Rosenberger TNC Reverse compliant with FCC standard (part 15, section ) derived from IEC , MIL-PRF-39012, DIN EN MIL-STD Ω DC to 10 GHz (max.) DC to 4 GHz (opt.) 20 db (typ.) 0.1 x f(ghz) db 5 GΩ 1.5 mω 1 mω 1500 V rms 500 V rms 80 2 GHz Mating cycles Steckzyklen 500 Center contact captivation Innenleiter Haltekraft axial: 15 N Coupling torque recommended Drehmoment empfohlen 0.46 Nm to 0.69 Nm Environmental data Umweltdaten Temperature range Temperaturbereich -65 C to +165 C Thermal shock Temperaturzyklen MIL-STD-202, Method 107, Condition B Climatic category Klimakategorie IEC /165/21 Corrosion resistance Korrosionsbeständigkeit MIL-STD-202, Method 101, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106 Vibration Vibration MIL-STD-202, Method 204, Condition B Shock Schock MIL-STD-202, Method 213, Condition G Max. soldering temperature (PCB connectors) Max. Löttemperatur (Leiterplattensteckverbinder) IEC , +260 C for 10 sec. Materials Materialien Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Crimping ferrule Crimphülse Dielectric Dielektrikum Gasket Dichtung Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe / CuSn, Au plating CuZn, Au plating CuZn, white bronze plating Copper alloy, white bronze plating PTFE Rubber Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. Reverse Polarity Connectors 345
13 TNC Reverse, 50 Ω Cable Connectors Cable Connectors - Flexible Cables Straight Plug, crimp xordering Number Remarks Cable Group Assembly Instruction Crimp Inserts x56 RS N T 11 W x56 RS N T 11 W Packing Unit 24.2 Flexible Cables 7 x56 RS N5 a = 13.5 mm P W x56 RS N5 a = 13.5 mm P W x56 RS 107-1N8 N5 a = 13.5 mm N8 51 P W x56 RS 107-1Y8 N5 a = 12.0 mm Y8 51 P W a x56 RS 101-1N9 N5 N9 53 W 4 11 W Panel Jack, crimp, hexagonal flange xordering Number Version Cable Group Assembly Instruction Panel Piercing / PCB Layout Crimp Inserts x56 RK N5 rear mount T B 3 11 W x56 RK N5 rear mount T B 3 11 W Packing Unit Flexible Cables SW 16 SW
14 TNC Reverse, 50 Ω Adaptors Adaptors Adaptors (Inter Series) xordering Number Version Remarks Packing Unit x56 RS 153-K00 N5 straight TNC reverse male - N Standard female Reverse Polarity Connectors 347
MCX-Koaxial-Steckverbinder verfügen über eine Schnappverbindung
MCX coaxial connectors, provided with a snap-on coupling mechanism, are mainly applied in RF cable connections up to 6 GHz, e.g. in fixed and wireless communication systems. MCX connectors are characterized
SMB, SMC, SMG, SSMB, SSMC
SMB, SMC, SMG, SSMB, SSMC Rosenberger provides the following subminiature coaxial connector series for various application fields: SMB connectors: Snap-on connectors for applications up to 4 GHz SMC connectors:
Micro-RF. 294 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
Micro-RF components can be used up to 6 GHz in various wireless applications, e. g. cellular and cordless phones, Bluetooth and wireless LAN applications, PDAs (Personal Digital Assistants) or wireless
4.3-10 4.1-9.5. 256 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.
The connector system is designed to meet the rising performance needs of mobile network equipment e.g. to connect the RRU to the antenna. Features of the Connectors are compact connector sizes, best electrical
SMB (50 Ω), SMG, SMC, SMB (75 Ω) BT 43
SMB (50 Ω), SMG, SMC, SMB (75 Ω) BT 43 SMB (50 Ω) 1SMB (50 Ω) (50 Ω) - Subminiature Coaxial Connectors with Snap- on Coupling Mechanism SMB connectors are designed with a snap- on connection and can be
MCX (50 Ω) - Mikrominiatur- Koaxialsteckverbinder für Anwendungen bis 6 GHz. (50 Ω) - Microminiature Coaxial Connectors for Frequencies up to 6 GHz
MCX 3 MCX (50 Ω) MCX (50 Ω) 1MCX (50 Ω) (50 Ω) - Microminiature Coaxial Connectors for Frequencies up to 6 GHz MCX - optimal connector series, provided with a snap- on connecting system like SMB connectors,
FMC. 52 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
Reverse Polarity Connectors (SMA, BNC, TNC)
Reverse Polarity Connectors (SMA, BNC, TNC) 16 SMA Reverse 1SMA Reverse Reverse Polarity - Sub- Miniature Coaxial Connectors with Reverse Center Contacts and Dielectrics up to 18 z "Reverse Polarity"
Rosenberger provides Micro-RF components such as Micro-RF test switches, PCB connectors, cable assemblies, adaptors.
Rosenberger provides Micro-RF components such as Micro-RF test switches, PCB connectors, cable assemblies, adaptors. Rosenberger bietet Mikro-HF-Komponenten wie Mikro- HF-Testschalter, -PCB-Steckverbinder,
QMA - Kostengünstiger Quick- Lock- Einrastmechanismus. Unsere QMA- Steckverbinder entsprechen dem QLF- Standard;
5 1 - Cost- Effective Quick- Lock Mechanism Our Connectors are QLF Products; www.qlf.info connectors defined with features and dimensions by the series SMA, the maximum fequency is 18 GHz. The modified
FMC. Features. Product Range
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
Rosenberger RPC- 7- Steckverbinder erfüllen die Normen: IEC Part 2
3 Series RPC- 7 1Series RPC-7 Rosenberger RPC- 7 connectors are 50 Ω precision coax connectors with an outer conductor diameter of 7 mm. They have been designed with excellent data over the full frequency
1.6-5.6. This datasheet has been downloaded from http://www.digchip.com at this page
1.6-5.6 This datasheet has been downloaded from http://www.digchip.com at this page 1.6-5.6, II. Generation 11.6-5.6, II. Generation 1.6-5.6, II. Generation - Coaxial Connectors for Applications in Communication
Cable Feed Through and Terminals, UHF, Mini-UHF, FME, Microdot, C, MHV, SHV, HV 4-10, HN
able eed Through and Terminals, UH, Mini-UH, M, Microdot,, MHV, SHV, HV 4-10, HN or very specific applications and requirements Rosenberger provides a wide range of coaxial connector series, e.g. UH, Mini-UH,
Mini- SMP. 3Mini- SMP. Extremely small subminiature coaxial connectors for applications up to 65 GHz.
3 Extremely small subminiature coaxial connectors for applications up to 65 GHz. The series is a push- on connection, the characteristic impedance is 50 Ω Compared to the SMP series, the size is approximately
SERIES Serie SMA SMA
SERIES Serie 5 - Sub- Miniature Coaxial Connectors in Precision Quality for Microwave Applications up to 8 GHz connectors satisfy high quality standards and are characterized by high durability, high
SSMB - Mikrominiatur- Koaxial- Steckverbinder mit Snap- on- Verbindung. Produkteigenschaften. Product Features. 7 Product Range.
SSM, SSM 7 SSM 1SSM - Micro- Miniature oaxial onnectors with Snap- on oupling Mechanism SSM connectors series uses a snap- on connection. In doing this connectors are plugged together and are held by
6 FME FME. 140 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
6 Contents 6.1 Straight Plug Crimp................ 143 6.2 Press-In Bulkhead Receptacle, male... 143 6.3 Straight Jack Crimp................ 143 6.4 Bulkhead Plug.................... 144 6.5 Adaptor........................
4 UHF UHF. 122 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
4 Contents 4.1 Straight Plug..................... 125 4.2 Straight Plug Crimp................ 125 4.3 Angle Plug...................... 125 4.4 Angle Plug Crimp................. 126 4.5 Bulkhead Jack Crimp...............
Test, Measurement & Calibration
Test, Measurement & Calibration For vector network analyzer applications, Rosenberger offers high-flexible microwave test cables while maintaining excellent electrical characteristics. Outstanding phase
Climatic category acc. to IEC /155/21... Prüfklasse nach DIN IEC 68 Teil 1
12 Contents 12.1 Straight Plug................... 223 12.2 Straight Plug Crimp.............. 223 12.3 Angle Plug.................... 224 12.4 Angle Plug Crimp............... 225 12.5 U Link, male...................
Telegärtner Web: Tel: +49 (0) / Fax: +49 (0) /
223 13 13.1 Bulkhead Plug...228 13.2 Straight Receptacle, Male, for PCB...228 13.3 Angle Receptacle, Male, for PCB...228 13.4 Straight PCB Receptacle in SMT and Edge-Mount...229 13.5 Straight PCB Plug...229
Code for Special Contacts Nummernschlüssel für Sonderkontakte
Code for Special Nummernschlüssel für Sonderkontakte Ordering Code Bestellschlüssel Series Features Baureihen-Features FDX-Series FDX-Serie Coaxial contact for cable termination Inner conductor for solder
Reverse Polarised Connectors R-TNC, R-SMA, R-BNC Reverse polarisierte Steckverbinder R-TNC, R-SMA, R-BNC
15 Reverse Polarised Connectors R-TNC, R-SMA, R-BNC Contents 15.1 R-SMA Straight Plug Crimp............. 272 15.2 R-SMA Angle Plug Crimp............... 272 15.3 R-SMA Straight Jack Crimp..............
FME, Microdot, F, C, MHV, SHV, HV 4-10, HN, IEC Antenna, Twinax, Twinax- BNC, NET- JET
M, Microdot,,, MV, SV, V 4-10, N, I ntenna, Twinax, Twinax- N, NT- JT M (SP) 1M (SP) (SP) - Special oaxial onnectors for ellular pplications in Vehicles M- ompact miniature connectors developed für mobile
Koaxiale Steckverbindung Coaxial Connector Series
Koaxiale Steckverbindung Coaxial Connector Series Die Steckverbindung ist bis 18 GHz einsetzbar und eine der am weitesten verbreitete Steckverbindung. SPIER- -Stecker werden nur mit einer ungeschlitzten
BNC - Programm BNC Programme
- Programm S. 215 Adapter Adapters S. 217 -Adapterleitungen adapter leads S. 218 Sicherheits-Adapter Safety adapters www.schuetzinger.de 213 - Programm Die HF-Steckverbindung der Serie ist die häufigste
DIN Steckverbinder / Connectors
14 DIN 41617 Steckverbinder / Connectors Steckverbinder DIN 41617 Connectors DIN 41617 Dieser traditionelle Steckverbinder geht nach wie vor immer noch seinen Weg in den vielfältigsten Anwendungsbereichen.
Inserts: Mini- Coax, D- Sub, DIN ( Ω), (75 Ω), High Voltage DIN, Power (DIN D- Sub)
Inserts: Mini- oax, - Sub, 1.0-2.3 IN 41626 (50 + 75 Ω), 0.8-2.7 (75 Ω), igh Voltage IN, Power (IN 41626 + - Sub) 10 Insert Mini oax 1Insert Mini oax Mini oax - Miniature oaxial onnectors for ybrid onnections
Inserts: 1.0-2.3, 08.-2.7 DIN 41626, D-Sub, High Voltage & Power, Mini-Coax
nserts: 1.0-2.3, 08.-2.7 N 41626, -Sub, igh Voltage & Power, Mini-oax Rosenberger provides a variety of coaxial inserts, high voltage and high power inserts. ue to their small dimensions, high packing
8 SMB/SMC/SMS SMB/SMC/SMS
8 Contents 8.1 Straight Plug Crimp.................... 175 8.2 Angle Plug Crimp..................... 175 8.3 Bulkhead Plug........................ 176 8.4 Bulkhead Plug Crimp.................. 176 8.5
Wir setzen Standards. Connector 4 Small Drives TWINTUS
Wir setzen Standards Connector Small Drives Connector small drives Das kosteneffiziente Stecksystem für energieeffiziente Servomotoren Cost effective connectors for energy efficient servo drives Minimale
M9 IP40 Subminiature. Cable Connectors Screw termination M9 2 8 contacts Degree of protection IP40 1) Solder termination Diameter 11.
Subminiatur M9 IP0 Subminiatur M9 IP0 Subminiature Kabelsteckverbinder Schraubverriegelung M9 8-polig Schutzart IP0 ) Lötanschluss Durchmesser, mm Flanschsteckverbinder Schraubverriegelung M9 8-polig Schutzart
MMCX Mikrominiaturkoaxialkontakte MMCX Microminiature Coaxial Connectors Technische Daten Technical Data
MMX Mikrominiaturkoaxialkontakte MMX Microminiature oaxial onnectors Technische Daten Technical Data Mechanische Daten Mechanical Data Mechanische Daten Mechanical data Steckkraft max. 15.2 N Mating force
M12 Automatisierungstechnik - Sonder - US-Kodierung M12 Automation Technology - Special - US-Coding
665 Sonder Sensor 815 866 M12 Automatisierungstechnik - Sonder - US-Kodierung M12 Automation Technology - Special - US-Coding Kabelsteckverbinder Schraubverriegelung nach DIN EN 61076-2-101 Schutzart IP67/IP68
Please Note Anmerkung
Please Note We accept no responsibility for the rights of third parties with regards to any of the herein printed tables or descriptions. With this catalog components are illustrated, features are not
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte. 90 Solder pin, 9.4 mm Machined contacts. Stiftleiste Plug connector. Buchsenleiste Socket connector
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte 90 Solder pin, 9.4 mm Machined contacts Stiftleiste Plug connector Buchsenleiste Socket connector A A D D 1 2 3 4 5 5 4 3 2 1 7 8 9 Ø 0. 10 9.4 1.3 max.
Aufbau des Steckverbinders: Construction of the connector:
Serie 2 0 81 72 62 69 69 71 76 76 71 71 81 77 Subminiatur undsteckverbinder Serie Subminiature circular connectors series Kabelsteckverbinder Steckverbinder mit Schnappverriegelung Schutzart IP 0 1) Ausführungen
M12 DC-POWER-Steckverbinder T-Kodierung M12 DC-POWER-connectors T-coded
BF-C BF-B BF-A 7/8 M8 M-US M-T M-S M-D M-B Verteiler VL M-A M8 M5 RD0 RD M5 Bajonett M M6 IP67 M6 IP0 PP IP67 NCC Bajonett SI IP67 M9 IP67 M9 IP0 PP IP67 MPP IP67 Bajonett SI IP67 SI IP0 M DC-POWER-Steckverbinder
Katalog Steckverbinder. Catalog Connectors
Katalog Steckverbinder Catalog Connectors TECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12 Bauform Einheit F H11 H15 Type Unit Maximale Polzahl 48 11 15 Maximum Contacts Kontaktreihenbezeichnung
Subminiatur. Subminiature
Subminiatur Subminiature 0 Subminiatur Bayonet Subminiature Kabelsteckverbinder -Verriegelung 8-polig Schutzart IP0 ) Lötanschluss Durchmesser mm Flanschsteckverbinder -Verriegelung 8-polig Schutzart IP0
Micro Push-Pull Subminiature
0 Subminiatur Subminiature Kabelsteckverbinder Push-Pull-Verriegelung -polig Schutzart IP0 ) Lötanschluss Durchmesser 9, mm Flanschsteckverbinder Push-Pull-Verriegelung -polig Schutzart IP0 ) Lötanschluss
D-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
M5 Automatisierungstechnik M5 Automation Technology
707 Automatisierungstechnik Automation Technology Kabelsteckverbinder Schraubverriegelung - und -polig Schutzart IP67 ) Am Kabel angespritzte Ausführungen Gewindering mit Rüttelsicherung Flanschsteckverbinder
Low Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe
Contact Cambridge Connectors. Phone +44 1223 8641 Email: sales@cambridgeconnectors.com Low Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe Ordering Code Bestellschlüssel ALL DIMENSIONS
SPINNER MOBILE COMMUNICATION
Das Stecksystem N kann bis 11 GHz eingesetzt werden (Präzisionsausführung bis 18 GHz). Der Einsatz ist vorwiegend in Mobilfunkanwendungen mit hohen mechanischen und elektrischen Anforderungen. SPINNER
Miniatur Rundsteckverbinder Serie 723 Miniature circular connectors series 723. Kurzinformation Brief information Ü TI
Serie 0 09 0 0 6 60 6 0 6 69 69 69 69 6 6 6 66 0 Miniatur undsteckverbinder Serie Miniature circular connectors series Kabelsteckverbinder Steckverbinder mit Schraubverriegelung nach IEC 0-9 Schutzart
Cable Connectors Screw termination M contacts Degree of protection IP40 1) Solder termination Diameter 28 mm Shieldable
M Power M Power Kabelsteckverbinder Schraubverriegelung M -polig Schutzart IP0 ) Lötanschluss Durchmesser mm Schirmbar Flanschsteckverbinder Schraubverriegelung M -polig Schutzart IP0 ) Lötanschluss Durchmesser,
Bajonett Subminiatur Bayonet Subminiature
Subminiatur 0 0 Subminiatur Bayonet Subminiature Kabelsteckverbinder -Verriegelung 8-polig Schutzart IP0 ) Lötanschluss Durchmesser mm Flanschsteckverbinder -Verriegelung 8-polig Schutzart IP0 ) Lötanschluss
D-Sub Dualport Connectors D-Sub Dualport Steckverbinder
Contact Cambridge Connectors. Phone +44 1223 841 Email: sales@cambridgeconnectors.com D-Sub Dualport Connectors D-Sub Dualport Steckverbinder Ordering Code Bestellschlüssel 88 DS 1/27 Technical Data Technische
Verbindungsleitungen Serie 765 Connecting cables series 765. Kurzinformation Brief information Ü TI
Serie Verbindungsleitungen Serie onnecting cables series Kurzinformation rief information 70 7 72 79 2 25 0 58 72 62 69 69 69 7 78 7 76 7 75 85 steckverbinder Verbindungsleitungen der steckverbinder von
HF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
Automatisierungstechnik - Aktorik - Bauform B Automation Technology - Actuatorics - Size B
5 0 Automatisierungstechnik - Aktorik - Automation Technology - Actuatorics - Size B Gerätesteckdosen Magnetventilsteckdosen Verbindungsleitungen DIN EN 7530-803 Industrie + Niedriges Gehäuse Schutzart
Kurzinformation Brief information. Subminiatur Rundsteckverbinder Serie 711 Subminiature circular connectors series 711 Ü TI
Serie 11 11 0 09 10 11 1 19 0 1 6 60 6 0 6 69 69 69 0 1 1 6 6 6 1 1 66 1 0 Subminiatur undsteckverbinder Serie 11 Subminiature circular connectors series 11 Kabelsteckverbinder Steckverbinder mit Schraubverriegelung
Snap-in Steckverbinder IP40 Snap-in connectors IP40
R BF-C BF-B BF-A 7/8 M8 M-US M-D M-B Verteiler VL M-A M8 M RD0 RD M Bajonett M M6 IP67 M6 IP0 PP IP67 Bajonett SI IP67 M9 IP67 M9 IP0 PP IP67 MPP IP67 Bajonett SI IP67 SI IP0 TI Ü binder Snap-in Steckverbinder
Test, Measurement & Calibration
Test, Measurement & Calibration Rosenberger offers a wide range of calibration kits for a variety of standard coaxial test interfaces. The following types are available: Full versions including adaptors
M12 AC-POWER-Steckverbinder S-Kodierung M12 AC-POWER-connectors S-coded
BF-C BF-B BF-A 7/8 M8 M-US M-T M-S M-D M-B Verteiler VL M-A M8 M5 RD0 RD4 M5 Bajonett M M6 IP67 M6 IP40 PP IP67 NCC Bajonett SI IP67 M9 IP67 M9 IP40 PP IP67 MPP IP67 Bajonett SI IP67 SI IP40 M AC-POWER-Steckverbinder
Bajonett NCC Miniatur Bayonet NCC Miniature
0 Miniatur Bayonet NCC Miniature Kabelsteckverbinder Bajonett-Verriegelung 8-polig Schutzart IP ) Lötanschluss Durchmesser 9,9 mm Flanschsteckverbinder Bajonett-Verriegelung 8-polig Schutzart IP ) auch
Der 7-16 Steckverbinder hat sich durch seine herausragenden
COAXIAL CONNECTORS TYPE 50 Ω Der Steckverbinder hat sich durch seine herausragenden mechanischen und elektrischen Eigenschaften zum weltweit am meisten verwendeten koaxialen Stecksystem für Mobilfunk-Sendeanlagen
Subminiatur Rundsteckverbinder Serie 711 Subminiature circular connectors series 711. Kurzinformation Brief information Ü TI
Serie 11 11 Subminiatur undsteckverbinder Serie 11 Subminiature circular connectors series 11 Kurzinformation rief information 60 0 09 10 11 1 19 0 1 6 60 6 0 6 69 69 69 0 1 1 6 6 6 1 1 66 1 0 6 Kabelsteckverbinder
Kabeldose Female cable connector
BF-B BF-A 7/8 M8 M-US M-T M-S M-D/-X M-B Verteiler VL M-A Flanschsteckverbinder Socket connectors M8 M RD0 Kabeldose Female cable connector HEC RD M Aufbau des Steckverbinders: Construction of the connector:
D-Sub, Mixed Layout, Feed-through Capacitor D-Sub, Mixed Layout, Durchführungskondensator
D-Sub, Mixed Layout, Feed-through Capacitor D-Sub, Mixed Layout, Durchführungskondensator Ordering Code Bestellschlüssel Feature, Advantages Merkmale, Vorteile C-Filter Feed-through ceramic capacitor Fully
Miniatur Miniature 115
Miniatur Miniature 70 Miniatur Miniature Kabelsteckverbinder -Verriegelung -polig Schutzart IP67 ) Lötanschluss Am Kabel angespritzte Ausführungen Durchmesser 6 mm Farbige Ausführungen Flanschsteckverbinder
Micro Push Pull Steckverbinder Micro Push Pull connectors
R BF-C BF-B BF-A 7/8 M8 M-US M-D M-B Verteiler VL M-A M8 M RD0 RD M Bajonett M M6 IP67 M6 IP0 PP IP67 Bajonett SI IP67 M9 IP67 M9 IP0 PP IP67 MPP IP67 Bajonett SI IP67 SI IP0 TI Ü binder Steckverbinder
D-Sub, C-Filter, Feed-through Capacitor D-Sub, C-Filter, Durchführungskondensator
D-Sub, C-Filter, Feed-through Capacitor D-Sub, C-Filter, Durchführungskondensator Ordering Code Bestellschlüssel Features, Advantages Merkmale, Vorteile C-Filter Feed-through ceramic capacitor Fully compatible
Snap-in IP67 Subminiature
60 Subminiatur Subminiature Kabelsteckverbinder Snap-in-Verriegelung 8-polig Schutzart IP67 ) Lötanschluss Am Kabel angespritzte Ausführungen Durchmesser,5 mm Farbige Ausführungen Flanschsteckverbinder
Push-Pull Subminiature
0 Subminiatur Subminiature Kabelsteckverbinder -Verriegelung 8-polig Schutzart IP0/IP ) Lötanschluss Durchmesser, mm Schirmbar Flanschsteckverbinder -Verriegelung 8 polig Schutzart IP0/IP ) Lötanschluss
M9 Steckverbinder IP40 M9 connectors IP40
BF-C BF-B BF-A / M M-US M-T M-S M-D M-B Verteiler VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP NCC Bajonett SI IP M9 IP M9 IP0 PP IP MPP IP Bajonett SI IP SI IP0 M9 Steckverbinder IP0 M9 connectors
SMT Connectors SMT Steckverbinder. Ordering Code Bestellschlüssel
SMT Connectors SMT Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 21 Special Features Besondere
MICRO MINIATURE & MINI CONNECTORS
MICRO MINIATURE & MINI CONNECTORS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE - INNOVATION
Bajonett Steckverbinder Bayonet connectors
BF-C BF-B BF-A /8 M8 M-US M-T M-S M-D M-B Verteiler VL M-A M8 M RD0 RD M M M IP M IP0 PP IP NCC SI IP M IP M IP0 PP IP MPP IP SI IP SI IP0 Steckverbinder Bayonet connectors Kabelsteckverbinder Steckverbinder
Micro Push Pull Steckverbinder Micro Push Pull connectors
BF-C BF-B BF-A 7/8 M8 M-US M-T M-S M-D M-B Verteiler VL M-A M8 M RD0 RD M Bajonett M M6 IP67 M6 IP0 PP IP67 NCC Bajonett SI IP67 M9 IP67 M9 IP0 PP IP67 MPP IP67 Bajonett SI IP67 SI IP0 Steckverbinder connectors
RD30 Steckverbinder RD30 connectors
BF-C BF-B BF-A / M M-US M-T M-S M-D M-B Verteiler VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP NCC Bajonett SI IP M IP M IP0 PP IP MPP IP Bajonett SI IP SI IP0 RD0 Steckverbinder RD0 connectors RD0
694 RD30 Power 694 Kabelsteckverbinder Cable Connectors Flanschsteckverbinder Panel Mount Connectors 336
Power 9 RD0 Power RD0 Power 9 Kabelsteckverbinder Schraubverriegelung RD0 - (+PE), - (+PE) und -polig Schutzart IP ) Löt-/Schraubklemmanschluss Durchmesser 0 mm Varianten mit VDE-, SEV-Zulassung Flanschsteckverbinder
M16 Steckverbinder IP 40 M16 connectors IP 40
R BF-C BF-B BF-A /8 M8 M-US M-D M-B Verteiler VL M-A M8 M RD0 RD M Bajonett M M IP M IP0 PP IP Bajonett SI IP M9 IP M9 IP0 PP IP MPP IP Bajonett SI IP SI IP0 TI Ü binder M Steckverbinder IP 0 M connectors
Low Profile Connectors Steckverbinder mit geringer Einbauhöhe. Product Description Produktbeschreibung
Low Profile Connectors Product Description Produktbeschreibung Advantages and Special Features Low profile desgin for use in appliance with division units Available in sizes 9-way to -way Pin and socket
Kabelstecker und Flanschdose Male cable connector and female socket connector
SI IP0 SI IP M IP M IP0 PP IP MPP IP SI IP M M IP M IP0 PP IP NCC 0 RD M Aufbau des Steckverbinders: Construction of the connector: RD0 HEC Kabelstecker und Flanschdose Male cable connector and female
Kurzinformation Brief information. Miniatur Rundsteckverbinder Serie 678 Miniature circular connectors series 678 Ü TI
Serie 68 68 0 09 10 11 1 3 0 81 68 68 0 3 63 69 69 0 13 18 63 6 68 1 66 81 80 Miniatur undsteckverbinder Serie 68 Miniature circular connectors series 68 Kabelsteckverbinder Steckverbinder mit Bajonettverriegelung
M16 Steckverbinder IP 40 M16 connectors IP 40
R BF-C BF-B BF-A /8 M8 M-US M-D M-B Verteiler VL M-A M8 M RD0 RD M Bajonett M M IP M IP0 PP IP Bajonett SI IP M9 IP M9 IP0 PP IP MPP IP Bajonett SI IP SI IP0 TI Ü binder M Steckverbinder IP 0 M connectors
M18 Automatisierungstechnik - Sonder M18 Automation Technology - Special
679 Sonder Sensor Automatisierungstechnik - Sonder Automation Technology - Special Kabelsteckverbinder Schraubverriegelung Schutzart IP67 1) Einfache Montage Schraubklemmanschluss Winkelsteckverbinder
TECHNISCHE DATEN Hochleistungsrelais TECHNICAL DATA High Power Relay
TECHNISCHE DATEN Hochleistungsrelais TECHNICAL DATA Seite Modell Bauart Funktion Dauerstrom Elektrischer Anschluß Page Model Design Function Duty rating Electrical link 2-3 Serie 911 Hochleistungsrelais
Snap-in IP40 Subminiature
79 709 Snap-in IP0 Subminiatur Snap-in IP0 Subminiature Kabelsteckverbinder Snap-in-Verriegelung 5-polig Schutzart IP0 ) Lötanschluss Am Kabel angespritzte Ausführungen Einfache Montage Flanschsteckverbinder
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder Technical Data Technische Daten Mechanical Data Mechanische Daten Shell Gehäuse Insulator Isolierkörper Signal contacts Signalkontakte
Product Description Produktbeschreibung. SMT Steckverbinder
SMT Connectors Product Description Produktbeschreibung Advantages and Special Features This SMT connector was specifically developed for use with fully automatic assembly and solder procedures. The following
M12 Steckverbinder US-Kodierung M12 connectors US-coded
R BF-C BF-B BF-A 7/8 M18 M12-US M12-D M12-B Verteiler M12 PP VL M12-A M8 M5 RD0 RD24 M25 Bajonett M2 M16 IP67 M16 IP40 PP IP67 Bajonett SI IP67 M9 IP67 M9 IP40 PP IP67 Bajonett SI IP67 SI IP40 TI Ü binder
Verarbeitungsspezifikation Application Specification. Verarbeitungsspezifikation. Application Specification MA-D4V013. für for. Winkelstecker für PCB
Verarbeitungsspezifikation MA-D4V013 für for Winkelstecker für PCB Right angle plug for PCB D4S20A-400xx-y / D4S2UA-400xx-y D4S20D-400xx-y / D4S2UD-400xx-y D4S20G-400xx-y / D4S2UG-400xx-y A0 08-s263 Neureiter
Bajonett Steckverbinder NCC IP67 Bayonet connectors NCC IP67
BF-C BF-B BF-A / M M-US M-T M-S M-D M-B Verteiler VL M-A M M5 RD0 RD M5 Bajonett M M IP M IP0 PP IP NCC Bajonett SI IP M9 IP M9 IP0 PP IP MPP IP Bajonett SI IP SI IP0 Bajonett Steckverbinder NCC IP Bayonet
Maschinen Rundsteckverbinder Serie 691 Circular connectors for machines series 691. Kurzinformation Brief information Ü TI
Serie Maschinen undsteckverbinder Serie ircular connectors for machines series Kurzinformation rief information 0 09 0 9 4 4 8 68 0 6 69 6 6 8 8 86 Kabelsteckverbinder Steckverbinder mit Schraubverriegelung
Medical Connectivity Solutions
Medical Connectivity Solutions Rosenberger Sales Worldwide Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Tel: + 49-86 84-18- 0 I E-Mail: info@rosenberger.de Fax: + 49-86
Product Description Produktbeschreibung
THT/THR Connectors Product Description Produktbeschreibung Advantages and Special Features Our THR (Through Hole Reflow) connectors were specifically designed for the SMT manufacturing process. The basis
IDC Ribbon Connectors Flachbandkabelsteckverbinder. Product Description Produktbeschreibung
IDC Ribbon Connectors Product Description Produktbeschreibung Advantages and Special Features Connector with IDC-contacts for termination of IDC Ribbon cables Available in sizes -way to 7-way With strain-relief
M9 Steckverbinder IP40 M9 connectors IP40
R BF-C BF-B BF-A / M M-US M-D M-B Verteiler VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP Bajonett SI IP M9 IP M9 IP0 PP IP MPP IP Bajonett SI IP SI IP0 TI Ü binder M9 Steckverbinder IP0 M9 connectors
Bajonett Steckverbinder Bayonet connectors
R BF-C BF-B BF-A / M M-US M-D M-B Verteiler M PP VL M-A M M RD0 RD M M M IP M IP0 PP IP SI IP M9 IP M9 IP0 PP IP SI IP SI IP0 TI Ü binder Steckverbinder Bayonet connectors Kabelsteckverbinder Steckverbinder
M23 Steckverbinder IP67 M23 connectors IP67
R BF-C BF-B BF-A / M M-US M-D M-B Verteiler M PP VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP Bajonett SI IP M IP M IP0 PP IP Bajonett SI IP SI IP0 TI Ü binder M Steckverbinder IP M connectors IP M
M25 Steckverbinder M25 connectors
BF-C BF-B BF-A / M M-US M-T M-S M-D M-B Verteiler VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP NCC Bajonett SI IP M IP M IP0 PP IP MPP IP Bajonett SI IP SI IP0 M Steckverbinder M connectors M Kabelsteckverbinder
D-Sub, C-Filter, Chip Capacitor D-Sub, C-Filter, Chipkondensator
D-Sub, C-Filter, Chip Capacitor D-Sub, C-Filter, Chipkondensator Ordering Code Bestellschlüssel Features, Advantages Merkmale, Vorteile C-Filter Chip Ceramic capacitor Fully compatible with standard D-Sub
M25 Steckverbinder M25 connectors
R BF-C BF-B BF-A / M M-US M-D M-B Verteiler M PP VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP Bajonett SI IP M IP M IP0 PP IP Bajonett SI IP SI IP0 TI Ü binder M Steckverbinder M connectors M Kabelsteckverbinder
1 BNC BNC. 34 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
1 Contents 1.1 Straight Plug...................... 38 1.2 Straight Plug Crimp................. 40 1.3 Angle Plug....................... 43 1.4 Angle Plug Crimp.................. 44 1.5 Straight Jack......................
M5 Steckverbinder M5 connectors
R BF-C BF-B BF-A 7/8 M18 M1-US M1-D M1-B Verteiler VL M1-A M8 RD0 RD M5 Bajonett M M16 P67 M16 P0 PP P67 Bajonett S P67 M9 P67 M9 P0 PP P67 MPP P67 Bajonett S P67 S P0 T Ü 1 binder Steckverbinder connectors