Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN
|
|
- Siegfried Feld
- vor 6 Jahren
- Abrufe
Transkript
1 Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN DIN 800, mit Gewinde DIN 800, with thread A Tol. mittel A Mean tol. Bg5 Bg5 C Kleinstmaß C Minimum D E F D E F M , M M M M M M M76x M105x DIN DIN ab Kegelgröße 4 mit Mitnehmer From taper 4 with driver ab Kegelgröße 4 mit Mitnehmer From taper 4 with driver Lochzahl auf äußerem Lochkreis (F1) E1 G Holes on outer bolt (F1) E1 G F1 Lochzahl inn. F2 (äußerer Lochkreis (innerer Lochkr.) (F2) E2 Lochkr.) F1 (outer bolt ) Holes on inner bolt (F2) E2 F2 (inner bolt ) , xM10 3x10, , xM10 3x10, , xM10 4x10,5 104,8 8xM10 61, , xM12 4x13 133,4 8xM12 82, , xM16 4x17 171,4 8xM16 111, , xM20 6x xM20 165, , xM24 6x25 330,2 11xM24 247, , xM24 6x25 463,6 11xM24 368,3 Form A: Form B: Gewinde und Durchgangslöcher im Flansch (ohne inneren Lochkreis) Gewindelöcher und Durchgangslöcher im Flansch (äußerer Lochkreis) und Gewindelöcher im inneren Lochkreis. Shape A: Tapped holes and throughholes in flange (without inner bolt ) Shape B: Tapped holes and throughholes in flange (outer bolt ) and tapped holes in inner bolt A B C C 1 D Lochzahl äuß. Lochkreis (F1) F1 (äußerer Lochzahl inn. Lochkreis (F2) F2 (innerer E1 Lochkr.) E2 Lochkr.) Holes on outer F1 Holes on inner F2 A B C C 1 D bolt (F1) (outer bolt bolt (F2) (inner bolt E1 ) E2 ) , xM10 70, , xM10 82, , , xM10 104,8 8xM10 61, , , xM12 133,4 8xM12 82, , , xM16 171,4 8xM16 111, , , xM xM20 165, , , xM24 330,2 11 x M24 247, , , xM24 463,6 11 x M24 368,3 Form A: Gewindelöcher im Flansch (äußerer Lochkreis) ohne inneren Lochkreis Form B: Gewindelöcher im Flansch (äußerer Lochkreis) und im inneren Lochkreis Shape A: Tapped holes in flange (outer bolt ) without inner bolt Shape B: Tapped holes in flange (outer bolt ) and in inner bolt DIN und Bajonettscheiben-Befestigung g (ISO 702/III) DIN and and ISO 702/III with bayonet ring fixing Lochzahl x E F Number of holes x E , x , x , x , , x , , x , , x , x , , x ,6 F Verbindlich ist jeweils die neueste Ausgabe des DIN-Blatts. Latest edition of relevant DIN standard applies in each case.
2 SPINDLE NOSE A Type A1, A2, B1, B2. (ISO 702/I) (DIN 55021) (DIN 55026) A1 A2 B1 B2 Has tapped holes on both the outer and the inner bolt s. Has tapped holes on the outer bolt, but has no holes on the inner bolt. Has drilled holes on the outer bolt, and tapped holes on the inner bolt Has drilled holes on the outer bolt, but has no holes on the inner bolt. Spindle Nose Measuring Dia of A Pilot Dia max B 53,975 63,513 82, , , , , , ,225 Length of pilot (A1, B1) C ,288 15,875 17,462 19,05 20,638 22,225 25,4 Length of pilot (A2, B2) C 11,113 11,113 12,7 14,288 15,875 17,463 19,05 20,638 23,813 Radius inner bolt D ,955 41,275 55,563 82,55 123, ,15 265,113 Radius outer bolt E 35,331 41,275 52,388 66,675 85, , ,1 231, ,85 Dia of driving button F - 14,288 15,875 19,05 23,813 28,575 34,925 41,275 50,8 Angle to driving button Screw (A1, A2, B1) UNC 7/16 UNC 7/16 UNC 7/16 UNC 1/2 UNC 5/8 UNC 3/4 UNC 7/8 UNC 1 UNC 1-1/4 M10 M10 M10 M12 M16 M20 (M18) M24 (M22) M24 M30 Dia bolt hole (B1, B2) 11,9 11,9 11,9 13,5 16,7 20,2 23,4 26,6 32,9 Full depth thread 15, , ,7 36,5 41,3 50,8 Number of holes (outer) Number of holes (inner) Remark! 3 is without driving button. 100
3 SPINDLE NOSE D Type D1. ISO 702/II (DIN 55029) This is provided with a short tapered flange of the same dimensions as type A, but has in its face a number of holes (3 or 6) into which the lock studs of the chuck can be inserted. By turning eccentric the chuck is pressed towards the cone of the and is locked. Spindle Nose Dimension Dia of A Pilot Dia max B 53,975 63,513 82, , , , , ,775 Length of pilot C 11,113 11,113 12,7 14,288 15,875 17,463 19,05 20,638 Radius of holes E 35,331 41,275 52,388 66,675 85, , ,1 231,775 Dia of holes F 15,1 16,7 19, , ,7 42,1 Number of holes
4 SPINDLE NOSE DIN German Standard Type DIN. DIN (ISO 702/III) This is provided with a short tapered flange like the americane s. In its face this has a number of holes (3,4 or 6), into which the lock studs of the chuck can be inserted. The locking is made by a bayonet clutch. Spindle Dimension Dia of A Pilot Dia max B 53,983 63,521 82, , , , , ,795 Length of pilot C Dia of driving button F - 14,25 15,9 19,05 23,8 28,6 34,9 41,3 Radius of holes E 37,5 42,5 52,4 66,7 85,7 117,5 165,1 231,8 Dia of hole G Thread on lock studs M10 M10 M10 M12 M16 M20 M24 M24 Number of holes
5 SPINDLE NOSE L Type L. This is provided with a long, steep taper for locating and centering the chuck. A driving key and a flanged nut hold the chuck on the. Spindle Nose Dimension L-00 L-0 L-1 L-2 L-3 Thread in flange nut A 3 3 /4-6 Unified 4 1 /2-6 Unified 6-6 Unified 7 3 /4-5 Unified 10 3 /8-4 Unified Form - Special Form - Special Form - Special Form - Special Form - Special Mesh length of thread C 16,67 17,46 19,05 25,4 26,99 Dia pilot max B 69,85 82,55 104, ,35 165,1 Length of pilot D 50,8 60,325 73,025 85,725 98,425 Driving key (L x B x H) 38,1 x 9,52 x 9,52 44,45 x 9,52 x 9,52 60,32 x 15,87 x 15,8773,02 x 19,05 x 19,0582,55 x 25,4 x 25,4 103
11Winkel + Flansche. Angles + flanges. Winkel + Flansche/Angles + flanges 401
11Winkel + Flansche Angles + flanges Winkel + Flansche/Angles + flanges 401 Sicher um die Ecke Turning the corner safely 1 2 Flanschseite mit O-Ring Flange view with o-ring UNI Kabelverschraubungswinkel
MehrWinkel + Flansche 9Angles + Flanges
Winkel + Flansche 9Angles + Flanges Winkel + Flansche/Angels + Flanges 367 Damit es sicher um die Ecke geht Turning the corner safely 1 2 368 Winkel + Flansche/Angels + Flanges Praktische Winkelverschraubungen
Mehr10 Technischer. Drehfutter/Maschinen-Spindelköpfe nach DIN 10/82. Ausführung der Drehfutter. Maschinen-Spindelkopf nach DIN
Drehfutter/Maschinen-Spindelköpfe nach DIN Ausführung der Drehfutter Keilstangenfutter Duro-T Dieses Futter wird dort erfolgreich eingesetzt, wo hohe Spannkraft, hohe Rundlaufgenauigkeit und ver lässliche
MehrTechnische aten SPNNRIH lamping ranges eachten Sie die maximal zulässigen Spannbereiche! o not exceed maximum lamping ranges! **, **, **, ** Harte, einteilige acken Harte, geteilte acken Max. Hard solid
MehrPlanetary Screw Assembly
1 Planetary Screw Assembly (PLSA = Planetary Screw Assembly) Customer Presentation 1 Your Requirements Screw assemblies with high power density offered at market-oriented prices High load capacities, high
MehrMaterial: Messing vernickelt O-ring: NBR Eigenschaften: Mit Flansch und O-Ring Einsatztemp.: Von -20 /+100 C Schutzart: IP 68 AGRO H L
7.4.1 Messing nickel-plated brass Material: Messing vernickelt Material: Nickel-plated brass Features: flanged type and 8706.08 M 6x1,01) 9 3 5 50 8708.08 M 8x1,251) 10 3 5 50 8710.08 M10x1,51) 8712.08
MehrHex sockets/innensechskantschrauben Allen key/sechskant-stiftschlüssel
Hex sockets/innensechskantschrauben Allen key/sechskant-stiftschlüssel Page/Seite DIN 912 8.8 Plain/unbeh 3:1, 3:2 DIN 912 8.8 Zincpl/verz 3:3, 3:4 3 DIN 912 8.8 Full threaded/ganzgewinde Plain/unbeh 3:5
Mehrc a Grundbezeichnung Kolben-Ø (mm)
i H YD R A U LI KZYLI N D E R SPANNEN STANZEN BIEGEN BEWEGEN BLOCKZYLINDER DOPPELTWIRKEND TYP 600 MIT LÄNGSBOHRUNGEN g SW o c a d b h1 L1+Hub h2 L2 TYP 600 Betriebsdruck max. 500 bar. Grundbezeichnung
MehrDIN 2080 (ISO) Werkzeugaufnahmen DIN 2080 (ISO) Tool Holders
IN 2080 (ISO) Werkzeugaufnahmen IN 2080 (ISO) Tool Holders Spannzangenfutter OZ (RO) Collet chuck OZ (RO) 06 Spannzangenfutter ER Collet chuck ER 06 Fräseraufnahmen (Weldon) End mill holder (Weldon) 07
MehrNormteile Preisliste 2007 Price List Precision Standard Parts
Normteile Preisliste 2007 Price List Precision Standard Parts Normteile Verkauf / Sales Precision Standard Parts Stephan Dauber Fon +49(0)2408/12-334 stephan.dauber@schumag.de Werner Ofers Fon +49(0)2408/12-480
MehrInquiry/-Purchase order form for commercial vehicle
Inquiry/-Purchase order form for coercial vehicle We kindly ask you to fill in the data as complete as possible. This will enable us to select carefully the required product and to deliver at short notice.
MehrThermoelemente für Kunststoffverarbeitungsmaschinen Thermocouples for plastics converting machines
hermoelemente für Kunststoffverarbeitungsmaschinen hermocouples for plastics converting machines egende: legend: () hermo- oder usgleichsleitung () thermo- or compensating cable () ajonett Kappe () bajonet-cap
MehrGewindeschneidsortimente Thread Cutting Assortments
Gewindeschneidsortimente Thread Cutting Assortments M3 -E = Hochleistungsschnell-Stahl DIN 352 Für es ISO-Gewinde DIN 13, Toleranz 6H Anwendung Zum Schneiden von Gewinden. = High-speed-steel DIN 352 For
MehrGewindewirbeln auf Langdrehmaschinen
GEWINDEWIRBELN THREAD WHIRLING Gewindewirbeln auf Langdrehmaschinen Thread whirling for Swiss type machines Hartmetall-Wendeschneidplatten für Wirbelköpfe Indexable carbide inserts for Whirling Heads Zweigängige
MehrPRODUCTS RANGE LINE CARD
PRODUCTS RANGE LINE CARD www.rfindia.com DIN 467 KNURLED THUMB NUTS, THIN TYPE Randelmuttern, niedrige Form DIN 478 SQUARE HEAD BOLTS WITH COLLAR Vierkantschrauben mit Bund DIN 479 SQUARE HEAD BOLTS WITH
MehrHarry gefangen in der Zeit Begleitmaterialien
Episode 011 Grammar 1. Plural forms of nouns Most nouns can be either singular or plural. The plural indicates that you're talking about several units of the same thing. Ist das Bett zu hart? Sind die
MehrQUICKLOCK D-Sub HAUBEN / QUICKLOCK D-Sub Hoods Sätze für Gegenstecker / Sets for mating connector Variante A / Version A
Variante A / Version A D-Sub mit Gewinde auf der Steckseite (z.b. Combilock) / D- Sub with threaded bolt on mating side (e.g. Combilock) UNC 4-40 104T002 530RS4T Ohne Anschlag / Without Stop M3 104M3T002
MehrTest Report. Test of resitance to inertia effects of Zirkona Backwall. Sled Test (Frontal Impact) 20 g / 30 ms
Test Report Test of resitance to inertia effects of Zirkona Backwall Sled Test (Frontal Impact) 20 g / 30 ms This report serves solely as a documentation of test results. 93XS0002-00_TdC.doc Page 1 1.
MehrSechs Grundansichten (Six Principal Views):
Sechs Grundansichten (Six Principal Views): Projektionsmethode E bzw. 1 (First Angle Projection) Projektionsmethode A bzw. 3 (3 rd Angle Projection) 1 Vorderansicht (Front view) 2 Ansicht von oben (Top
MehrProduktinformation Product information
Produktinformation Product information Handgewindebohrer Handgewindebohrer führen wir im EVENTUS -Programm in gebräuchlichen Sorten und Abmessungen, profilgeschliffen und hinterschliffen, aus. Fragen Sie
MehrMaryland Metrics: Technical Data Chart web:
DIN 2573 Presion nominal 6 Rated pressure 6 Nenndruck 6 Norma de montaje Forma A : cara de junta sin exigencias Forma B: cara de junta con Rz=160 Standars of mounting Shape A : joint face without requirement.
MehrService Manual Service Anleitung U 58/7 KIT
Service Manual Service Anleitung U 58/7 KIT Service manual for changing the main filter on a supply unit Serviceanleitung zum Austausch des Hauptfilters an der Versorgungseinheit Exemplary, only the type
MehrTelefon: +49 (0) 5251 / Telefax: +49 (0) 5251 /
1 / 9 Assembly: Assembly plate: The left and right assembly plates are screwed onto the side of the vehicle frame via the designated bore holes. The following items shall be used per side for this purpose:
MehrAGRO H L. Besonders geeignet für die richtungsstabile Montage von Winkeln.
7.1.1 Entlüftungsstutzen Material: Messing vernickelt Filterscheibe: Sinterbronze Einsatztemp.: Von -50 /+300 C Filtergrad: 4 (Filterfeinheit 0,05-0,075) Die Filterscheibe ist spritzwasser- und insektensicher
MehrDistanzmontageteilen. Distance rolls
Distanzmontageteile Distance rolls Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical
MehrHartmetall-Wendeschneidplatten für Wirbelköpfe. Eingängige Gewinde One start
GEWINDEWIRBELN THREAD WHIRLING Gewindewirbeln auf Langdrehmaschinen Thread whirling for Swiss type machines Hartmetall-Wendeschneidplatten für Wirbelköpfe Indexable carbide inserts for Whirling Heads Zweigängige
MehrThrottle Pedal System. Gaspedal-System
Gaspedal-System Throttle Pedal System Die Konzeption dieser Gasbetätigung ist einzigartig, denn das Gaskabel ist komplett im Pedal integriert. Das bedeutet: Betätigung des Gaskabels erfolgt innerhalb des
MehrGuard-locking mechanism HST-TS2 Ident. No
Guard-locking mechanism HST-TS2 Ident. No. 10258 Personnel key Locking bolt actuator Field for inscription Functional diagram closed, the personnel key is trapped open, the key is trapped (Key not supplied)
MehrRundlaufgenauigkeit Kegel zu Schaft 0,003 mm. Runout accuracy taper to shaft 0,003 mm. Lieferung mit Messprotokoll. Delivery with measuring protocol
clever clamping Präzise Mess oder Kontrolldorne zur Abnahme von Werkzeugmaschinen gemäß ISO-Empfehlung R230 sowie zur Überprüfung des Rundlaufs und zum Ausrichten der Maschinenspindel. Precise test arbors
MehrSORTIMENTE ASSORTMENTS
SORTIMENTE ASSORTMENTS Maschinen- und Handgewinde Machine- and manual operation Maschinengewinde Machine operation EXACT EVENTUS 221 222 by EXACT Handgewinde Hand operation fein BSW BSP (G) UNC UNF Gewindereparatur
MehrLevel 1 German, 2016
90886 908860 1SUPERVISOR S Level 1 German, 2016 90886 Demonstrate understanding of a variety of German texts on areas of most immediate relevance 2.00 p.m. Wednesday 23 November 2016 Credits: Five Achievement
MehrGeometrie und Bedeutung: Kap 5
: Kap 5 21. November 2011 Übersicht Der Begriff des Vektors Ähnlichkeits Distanzfunktionen für Vektoren Skalarprodukt Eukidische Distanz im R n What are vectors I Domininic: Maryl: Dollar Po Euro Yen 6
Mehrlocks.com IC-MÖBELSCHLÖSSER IC LOCKS FOR RESIDENTIAL FURNITURE
www.lehmann locks.com IC-MÖBELSCHLÖSSER IC LOCKS FOR RESIDENTIAL FURNITURE Index Info... 2 Case locks and slam lock / Kastenschlösser & Schnäpperschloss... 4-5 Espagnolette locks / Drehstangenschlösser...
MehrLamellenbremse Serie LB
Lamellenbremse Serie LB Bestellnr. Typ ode -01000 Lamellenbremse - Eing.Ø25-Ausg.Ø25-7daNm LB-288--7- -01050 Lamellenbremse - Eing.Ø25-Ausg.Ø25-14daNm LB-288--14- -01100 Lamellenbremse - Eing.Ø25-Ausg.Ø25-21daNm
MehrSpiralo 48 TS TiN Spiralo 45 ZB TiN/VAP
Spiralo 45 ZB TiN/VAP Spiralo 45 ZB TiN/VAP Beschreibung wurde entwickelt, um eine einwandfreie Späneabfuhr bei tiefen Sacklöchern in langspanenden Werkstoffen zu ermöglichen. Die besondere Nutengeometrie
MehrFührungssäule (f6) ohne Nut nach DIN 9833, Form D. Führungssäulen (f6) mit Nut für Sicherungsplatte Guide posts (f6) with groove for safety plate
Säulen - Tragzapfen Guide posts - Trunnions 17 Führungssäule (f6) ohne Nut nach DIN 9, Form D Guide posts (f6) without groove acc. to DIN 9, style D Führungssäulen (f6) mit Nut für Sicherungsplatte Guide
MehrLevel 1 German, 2012
90886 908860 1SUPERVISOR S Level 1 German, 2012 90886 Demonstrate understanding of a variety of German texts on areas of most immediate relevance 9.30 am Tuesday 13 November 2012 Credits: Five Achievement
MehrDichtkegel-Verschraubungen mit 24 -Kegel und O-Ring Viton. Cone Sealing Couplings with 24 -Cone and O-ring Viton
Dichtkegel-Verschraubungen mit 24 -Kegel und O-Ring Viton Cone Sealing Couplings with 24 -Cone and O-ring Viton 9 DICHTKEEL-VERSCHRAUBUNEN MIT 24 -KEEL UND O-RIN - VITON - DIN EN ISO 8434-1 CONE SEALIN
MehrTriASS Schreibtische. TriASS Schreibtischsystem Montageanleitung. TriASS Desking System Assembly Instructions. Das Assmann Prinzip. Gute Arbeit.
Das Assmann Prinzip. Gute Arbeit. TriASS Schreibtischsystem Montageanleitung TriASS Desking System Assembly Instructions The Assmann principle. Designed to work well. TriASS Desks Schreibtisch, Typ ST16
Mehrxenergy Einspeise-, Abgangsfeld unten IZM2, 1600A 2000A incoming-, outgoing-unit bottom IZM2, 1600A 2000A
Aufbau Feld installation field 4-polig 4-pole Festeinbau fix 4-polig 4-pole Ausfahreinheit withdrawable Feld field 2000x800x600/800 Einbausatz mounting kit: IZM2 fest und ausfahrbar fix and withdrawable
Mehrtransfertische ohne antrieb transfer tables without drive
101 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 11 transfertische ohne antrieb transfer tables without drive > Transfertisch TOA 01-06 mit Einfachsegmenten // Transfertisch TOA 08-15
MehrC R 2025 C LOSE PUSH OPEN
3V C R 2025 C LOSE PUSH OPEN ) ) ) 25 222 3V C R 2025 C LOSE PUSH OPEN 25 222 3V C R 2025 C LOSE PUSH OPEN 25 222 Den här symbolen på produkten eller i instruktionerna betyder att den elektriska
MehrGewinde - Kernloch-Ø und Kern-Ø Muttergewinde Drill-Ø for Threads and Minor-Ø of Nut Threads
Drill-Ø for Threads and of s M Metr. ISO - Regelgewinde, 6H (5H) 1) Metric ISO - Coarse Thread 6H (5H) P Ø M 1 0,25 0,75 0,729 0,785 M 1,1 0,25 0,85 0,829 0,885 M 1,2 0,25 0,95 0,929 0,985 M 1,4 0,3 1,10
Mehr1. Verwendung des Teilesatzes. 2. Komponenten des Teilesatzes
1. Verwendung des Teilesatzes Der Teilesatz Elektropneumatische Mehrweite ist für Kettenstichmaschinen der Klasse 175 und 176 vorgesehen. 2. Komponenten des Teilesatzes Der Teilesatz besteht aus folgenden
MehrSchlitzmuttern Slotted round nuts Zweilochmuttern Round nuts with drilled holes in one face
T140 Verzeichnis abgedruckter Normen (nach steigender DIN Nummern geordnet) Dokument Ausgabe Titel (deutsch) Titel (englisch) DIN 267-24 DIN 314 DIN 315 DIN 431 DIN 466 DIN 467 DIN 546 DIN 547 DIN 548
MehrAbisoliermaschinen Stripping machines
AI 01 Das Basismodell AI 01 ist eine elektromotorisch angetriebene Abisoliermaschine. Eine exakte Abisolierung von Leitern verschiedener Isolationen ist bis zu einem Außendurchmesser von 5 mm möglich.
MehrDreiphasenumsteller Typ KDV Threephase Tap Changer Type KDV
Dreiphasenumsteller Typ KDV Threephase Tap Type KDV Dreieck-Schaltung Geräte Nr. E58-S Delta diagram Unit-No. E58-S Features: Drive from either end. 2.5 589 996 165 Umsteller Typ KDV Tap s Type KDV Dreiphasenumsteller
MehrVGM. VGM information. HAMBURG SÜD VGM WEB PORTAL - USER GUIDE June 2016
Overview The Hamburg Süd VGM-Portal is an application which enables to submit VGM information directly to Hamburg Süd via our e-portal web page. You can choose to insert VGM information directly, or download
MehrAGILIS Segmentspanndorn
www.roehm.biz driven by technology AGILIS Segmentspanndorn AGILIS Segment clamping mandrel Geeignet für die Bearbeitung von Werkstücken an Werkzeugmaschinen, zur Aufnahme für Dreh-, Schleif- und Fräsarbeiten.
Mehraustauschbar Removable ESN 195 r Platzsparender Abstandhalter zur Schnellmontage auf der Leiterplatte Bohrungen und Kleben nicht notwendig Kopfteil schnappt ein Space-saving spacer for quick mounting No
MehrPyramiden pyramids. Pyramiden pyramids. Mehrfachspannung auf 5-Achs Maschinen. Multiple clamping on 5-axis machines
Pyramiden pyramids Pyramiden pyramids Mehrfachspannung auf 5-Achs Maschinen Mehrfachspannungen für weniger Werkzeugwechsel und längere Spindellaufzeiten auf 5-Achs Maschinen. Beste Zugänglichkeit für kurze
MehrFestlager und Loslager sowie Spindelendenbearbeitung Fixed bearings, floating bearings and screw end machining
Festlager und Loslager sowie Spindelendenbearbeitung Fixed bearings, floating bearings and screw end machining Allgemeines und Eigenschaften geeignet für Kugelumlaufspindeln und für spindeln schwarz brünierte
MehrMontage YAMAHA MT / ABS. Art.-Nr.: schwarz
Art.-Nr.: 670.4543 schwarz Montage Der Bausatz umfaßt die folgenden Teile: Stück Bestellnr. Bezeichnung 1 700008830 Gepäckplatte 1 700008831 Gepäckplattenunterbau Bitte vor jeder Fahrt den festen Sitz
MehrHF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
MehrStandards Führungselemente nach AFNOR-Norm. Chapter 5 Guide elements according to AFNOR Standards
Kapitel 5 Führungselemente nach AFNOR-Norm Chapter 5 Guide elements according to AFNOR Standards Führungselemente nach AFNOR-Norm Guide elements according to AFNOR Standards Für den Werkzeug-, Vorrichtungs-
MehrEin Stern in dunkler Nacht Die schoensten Weihnachtsgeschichten. Click here if your download doesn"t start automatically
Ein Stern in dunkler Nacht Die schoensten Weihnachtsgeschichten Click here if your download doesn"t start automatically Ein Stern in dunkler Nacht Die schoensten Weihnachtsgeschichten Ein Stern in dunkler
MehrIP65 INOX-Tastaturen und Tastaturablagen für PRO-Geräte Produktinformation
SIMATIC, SIMATIC HMI Produktinformation A5E39957848 Gültigkeit Das vorliegende Dokument gilt für folgende Tastaturen und Tastaturablagen im Siemens-Portfolio der Systemkomponenten für PRO-Geräte: Tastatur
MehrAufsteck- und Flachgetriebemotoren
Aufsteck- und Flachgetriebemotoren Maßbilder Shaft mounted and Parallel shaft geared motors Dimension sheets UNIBLOCK 259 AS. 6A,S - AS. 56A,S d n... Seegerringdurchmesser / circlip diameter hauptabmessungen
MehrPräzisions Fühlerlehren Precision Feeler Gauges
Präzisions Fühlerlehren Precision Feeler Gauges Präzisions Fühlerlehren - Satz DIN 2275 Hohe Toleranzgenauigkeit für präzise Messwertermittlung Lehrenblätter aus gehärtetem Federstahl, konische Blattform,
MehrNewest Generation of the BS2 Corrosion/Warning and Measurement System
Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing
MehrArmaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l Montagezubehör installation accessories fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 7 Montagezubehör
MehrSYMBOLBIBLIOTHEK. Maschinenbau
SYMBOLBIBLIOTHEK Maschinenbau Die Bibliothek Maschinenbau enthält mehr als 14.000 Symbole gemäß DIN, DIN EN, DIN ISO und DIN EN ISO für die Erstellung von Maschinenbauzeichnungen sowie über 1.300 Symbole
MehrInhaltsverzeichnis Index / Table des matiérs
Inhaltsverzeichnis Index / Table des matiérs DEUTSCH Seite / Page HSK Gewindeschneid-Schnellwechselfutter DIN 69 8 Gewindeschneid-Schnellwechselfutter 5-8 MAS-BT / DIN 080 Gewindeschneid-Schnellwechselfutter
MehrForm B Form B Beidseitig geradstirnig Two straight ends. Form C Form C mit Stufenbohrung für Halteschraube With step bore fore fixation screw
A A Beidseitig rundstirnig Two round ends B B Beidseitig geradstirnig Two straight ends AB AB Einseitig rundstirnig, einseitig geradstirnig One round, one straight end AS AS mit Gewindebohrung für Abdrückschraube
MehrListening Comprehension: Talking about language learning
Talking about language learning Two Swiss teenagers, Ralf and Bettina, are both studying English at a language school in Bristo and are talking about language learning. Remember that Swiss German is quite
MehrSYSTEM COMPONENTS FOR 3~ RECESSED TRACK STANDARD 3~ RECESSED TRACK STANDARD. 3~ Recessed Track Standard
3~ RECESSED TRACK STANDARD Ceiling cut 40 59 3~ Recessed Track Standard 41 A 5-conductor recessed track with 3 separately switchable circuits and a data bus track. It consists of an extruded aluminum profile
MehrDas Werkzeugsystem im Überblick The Tool System Overview
simturn E3 > Allgemeine Informationen // General Information E3 SIMTEK Turning Tools Type E3 Das Werkzeugsystem im Überblick The Tool System Overview 3 Schneiden... Präzision. Effizienz. Wirtschaftlichkeit.
MehrLevel 1 German, 2014
90886 908860 1SUPERVISOR S Level 1 German, 2014 90886 Demonstrate understanding of a variety of German texts on areas of most immediate relevance 9.30 am Wednesday 26 November 2014 Credits: Five Achievement
MehrSpiralo 48 TS TiN Spiralo 45 ZB TiN/VAP
Spiralo 48 TS TiN Spiralo 45 ZB TiN/VAP M Metrisches ISO-Gewinde DIN 13 Baumaße DIN 371 / DIN 376 ISO Metric Threads, DIN 13 Dimensions DIN 371 / DIN 376 atalogue No. hamfer form hamfer length, threads
Mehr653X 650X 654X X 6580 AFNOR
Führungselemente / Guide elements Führungselemente nach -Norm Guide elements complying to standards 789 Ø25--50mm 787 Ø25--80mm 788 Ø25--80mm 764 Ø25--80mm 786 Ø25--63mm 653X Ø25--80mm 650X 654X 6560 657X
MehrKraftfahrt-Bundesamt DE Flensburg
E 1 MITTEILUNG ausgestellt von: Kraftfahrt-Bundesamt über die Erteilung einer Genehmigung für einen Radtyp nach der Regelung Nr. 124 einschließlich Änderung Nr. 00 Ergänzung 01 COMMUNICATION issued by:
MehrE 1 Bg Version A
E 1 Bg. 56-132 IEC Lüfterhauben; Stahlblech ohne/mit Seitenlochung IEC Fan - cowl; Deep drawn steel without/with mounting holes IEC Capot; En tôle emboutie sans/avec trous de fixation Version A IEC a b
MehrVerbindliche Bestellangaben für beliebige General- Hauptschlüsselanlagen, MZ047002ZU. HS-Anlage
Typ M-ES- M-ES- M-ES- M-ES- M-ES- M-ES- M-ES- M-ES- 0 / /3 3 Anzahl Pflichtangaben SAP-Auftrags-Nr.: Verbindliche Bestellangaben für beliebige General- Hauptschlüsselanlagen, MZ04700ZU Nur eine Auswahl
MehrUniversalarmatur Universal armature
Bedienungsanleitung Instruction manual Universalarmatur Universal armature ba432de UA 55 / UA 30 UA-SO Bestell-Nr. Order no. UA 55: 09 260 UA 30: 09 26 UA-SO: 09 263 V ba432de03 02/0 WTW WTW Montage Assembly
MehrTemperatursensor 1polig über Masse. Temperatur Sensor 1-pole common ground. Betriebssystem. switching on power supply
Temperatursensor 1polig über Masse Temperatur Sensor 1-pole common ground Technische Daten: Ausführung: Nennspannung: Temperaturangleichzeit: Anschlussart / Type of connection: A 1polig über Masse 1-pole
Mehrfon: + 49 (0) fax: + 49 (0) Armaturen GmbH 7 Montagezubehör 7 installation accessories
fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 7 Montagezubehör 7 installation accessories 7 fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 INFORMATION INFORMATION Armaturen GmbH Hier finden
MehrCABLE TESTER. Manual DN-14003
CABLE TESTER Manual DN-14003 Note: Please read and learn safety instructions before use or maintain the equipment This cable tester can t test any electrified product. 9V reduplicated battery is used in
MehrLevel 1 German, 2011
90886 908860 1SUPERVISOR S Level 1 German, 2011 90886 Demonstrate understanding of a variety of German texts on areas of most immediate relevance 9.30 am uesday Tuesday 1 November 2011 Credits: Five Achievement
MehrAnbauflansch mit Einbauspannsatz HSK-C mit zentraler Kühlmittelzuführung, komplett mit Einbauspannsatz für Hohlschaft DIN HSK-C und A
Anbauflansch mit Einbauspannsatz HSK-C mit zentraler Kühlmittelzuführung, komplett mit Einbauspannsatz für Hohlschaft DIN 69893 HSK-C und A Adaptors with Built-in Clamping System HSK-C with central coolant
MehrWelding gauge. Schweißnahtlehre. Welding gauge. Schweißnahtlehre. Welding gauge. Schweißnahtlehre. Ecknähte welding seams > mm <
aus Aluminium made of aluminum Ecknähte welding seams > < Flachnähte flat seams > < Gesamtlänge total length 2-15 0-5 62,5 1000-001 1000-001 aus Stahl fächerartig mit 12 Blatt zum Prüfen von Schweißnähten
MehrQ-Motor Multifunktionsmotor. Q-motor multi-function motor
Multifunktionsmotor multi-function motor Leistungsdaten Performance data Spannung voltage Frequenz frequency Drehzahl speed Leistungsabgabe power output Leistungsaufnahme power input Stromaufnahme current
MehrWerkzeugkatalog tool catalogue. Nakamura. Super NTM 3. 80er Revolver (55) / 80 turret (55)
Werkzeugkatalog tool catalogue Nakamura Super NTM 3 80er Revolver (55) / 80 turret (55) Hinweis zu den AGBs: Diese finden Sie in unserem Internetauftritt unter www.heimatec.de Home/Impressum/AGB Terms
MehrUnit 4. The Extension Principle. Fuzzy Logic I 123
Unit 4 The Extension Principle Fuzzy Logic I 123 Images and Preimages of Functions Let f : X Y be a function and A be a subset of X. Then the image of A w.r.t. f is defined as follows: f(a) = {y Y there
MehrZylinderschrauben mit Schlitz; Produktklasse A Slotted cheese head screws; Product grade A
FERTIGUNGSPROGRAMM gemäß DIN EN and DIN EN ISO PRODUCT HISTORY according to DIN EN and DIN EN ISO Symbol: Z = zurückgezogen removed and replaced ZE = ersatzlos zurückgezogen no replacement Status DIN EN
MehrAston Martin axle CR SW
Alfa Romeo axle 1014580 3014580 4014580 40145801 5014580 6014580 axle 1014580 3014580 4014580 5014580 6014580 axle 10135580 20135580 24135580 30135580 40135580 40155801 5015580 6015580 axle 1014580 20145802
MehrFlow through sight glasses Nr. 440/450
Flow through sight glasses Nr. 4/450 Durchfluss-Schaugläser in Eckform (Nr. 4) und Dreiwegeform (Nr. 450) mit Flanschanschluss bis Gehäuse in Schweißkonstruktion mit Einlaufstutzen, beiderseits Schauglasplatten
MehrUm die Originalschrauben an den Federbeinen zu demontieren, bedarf es eines Yamaha Spezialwerkzeugs: Torxnuss T40 mit Bohrung
C-Bow Taschenhalter ab Baujahr 05 Artikel Nr.: 604546 00 0 schwarz Montage Hinweise Um die Originalschrauben an den Federbeinen zu demontieren, bedarf es eines Yamaha Spezialwerkzeugs: Torxnuss T40 mit
MehrEMCO Installationsanleitung / Installation instructions
EMCO Installationsanleitung / Installation instructions Installationsanleitung Installation instructions Digitalanzeige digital display C40, FB450 L, FB600 L, EM 14D/17D/20D Ausgabe / Edition B 2012-03
MehrEVT-Schrauben Hauptstrasse 94, Sandhausen Tel. +49(0) Fax +49(0)
DIN 1 / ISO 2339 Kegelstift) Taper pin Edelstahl 1.4305 Edelstahl 1.4571 c 0,15 0,23 0,3 0,4 0,45 0,6 0,75 0,9 1,2 1,5 l/mm 1,0 1,5 2,0 2,5 3 4,0 5,0 6,0 8,0 10,0 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm
MehrFlanschwinkel und Winkel UKAPITEL_SubTitel. Flanged elbows and elbows. UKAPITEL_Titel
UKAPITEL_Titel Flanschwinkel und Winkel UKAPITEL_SubTitel Flanged elbows and elbows Sind bei der Kabelinstallation enge Raumverhältnisse gegeben, kann der Anwender auf die Vorteile von Winkeln und Flanschwinkeln
MehrAsynchronous Generators
Asynchronous Generators Source: ABB 1/21 2. Asynchronous Generators 1. Induction generator with squirrel cage rotor 2. Induction generator with woed rotor Source: electricaleasy.com 2/21 2.1. Induction
MehrBilderschienen picture rails. Bilderschienen
Bilderschienen Bilderschienen möller deco-technik möller deco-technique Bilderschienen Der Einsatz von Bilderschienen, im Wohn- und Objektbereich, findet immer mehr Anklang. Diese Schienen werden mittels
MehrStandard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA
Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA Lagerprogramm Stock Programme Inhalt Kettenradscheiben und Kettenräder - en von 6 mm bis 50,8
MehrGGV Anschlussflansch, gerade Im Schienenfahrzeugbau und weiteren industriellen Anwendungsgebieten mit hohen Sicherheits- und Dichtheitsanforderungen
Lafge Sizes GGV Flange, straight In railway vehicle construction as well as in a wide range of industrial applications with high sealing and safety requirements GGV Anschlussflansch, gerade Im Schienenfahrzeugbau
MehrLukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen
Technical Report No. 028-71 30 95685-350 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
MehrVI Auflockerungssysteme Aeration systems
VI Auflockerungssysteme / Aeration systems Seite / Page 125 VI Auflockerungssysteme Aeration systems Seite / Page Auflockerungssysteme + Zubehör / Aeration systems + accessories...126 Auflockerungssysteme
MehrEuropean BS Standard DIN 8187, Teil 1 ISO
2 3 European BS Standard DIN 8187, Teil 1 ISO 606-2004 chain pitch min. max. max. plate plate max. max. max. trans- ISO 606 weight inside roller plate thickness thickness pin pin connect verse tensile
Mehr2 grooves identify steel A4. to acids (green).
UKAPITEL_Titel Kabelverschraubungen Progress aus rostfreiem Stahl UKAPITEL_SubTitel Cable glands Progress stainless steel AGRO Kabelverschraubungen Progress aus rostfreiem Stahl weisen eine hohe Korrosionsbeständigkeit
Mehrxenergy Einspeise-, Abgangsfeld IZM40 Festeinbau 4000A ungl. S. incoming-, outgoing unit IZM40 fix 4000A OPPO
Aufbau Feld installation field 3-polig 3-pole 4-polig 4-pole Feld field 2000x1000x800 Einbausatz mounting kit: XMI40 Bemessungsstrom Current Rating (I): 4000A Material der Cu-Schienen busbar material:
Mehr