VZ-30 / 50 II 2 G * * * Maßzeichnung / Dimensional drawing. Daten und Maße / Data and dimensions. Anschlüsse / Connections
|
|
- Lennart Krause
- vor 6 Jahren
- Abrufe
Transkript
1 VZ- / II G Maßzeichnung / Dimensional drawing C Daten und Maße / Data and dimensions Hz / cycles 6 Hz / cycles Gewicht/Weight Anschlüsse / Connections Type BG/FS /min kw H /min kw H kg lbs U B U C U e U L U V VZ- 8 8,.,. 68 G / G /8 G / G / G / VZ- 9S 8,.,. 7 Type BG/FS a h u u w z z A AB BB C H HA HD VZ VZ- 9S BG = Baugröße, gilt für IE und IE-Motoren Abhängig von der Ausführung des Motors FS = Frame size, valid for IE motors and IE motors (subtype ) Depending on the motor design Schnittzeichnung / Sectional drawing Anschlüsse / Connections U B Anschluss für Betriebsflüssigkeit Connection for operation liquid U C Kavitationsschutz Cavitation protection U e Entleerung (Verschlussschraube) Drainage (screwed plug) U L Anschluss für Belüftungsventil Vacuum relief valve connection U V Anschluss für Entleerungsventil Connection for drainage valve Teileliste / art list 7 Gleitringdichtung Mechanical seal 6 Sauggehäuse Suction casing 7 Druckgehäuse Discharge casing /. Mittelkörper Stage casing 7-. Steuerscheibe Inter casing /. Laufrad Impeller Dichtring Sealing ring O-Ring O-ring Abstandsring Distance ring Scheibe Disk 6 Kerbstift Grooved pin 6 Zylinderstift arallel pin 9 Stiftschraube Stud 9 Verschlussschraube Screwed plug 9 Innen-6-kt.Schraube Hexagon socket head cap screw 9 6-kt.Mutter Hexagon nut 9/. assfeder Feather key 97 Typenschild Name plate 8 / 96.9
2 VZ- / Hz Kennlinien / Characteristic curves 6 Hz Kennlinien / Characteristic curves inlet pressure p [inch Hg a] inlet pressure p [inch Hg a] [m /h] Saugvermögen VZ- VZ- VZ- [CFM] Suction capacity VZ- [kw] Leistungsbedarf,,,,, VZ- VZ- VZ- VZ-,,,,,, [H] ower consumption [l/min] Wasserbedarf 6 8 VZ- VZ VZ- VZ [GM] Water requirement Hz-cycles 8 /min - rpm 6 Hz-cycles /min - rpm Saugvermögen und Leistungsbedarf in Abhängigkeit vom Ansaugdruck Die Kennlinien gelten bei Verdichtung trockener Luft von C vom Ansaugdruck auf Atmosphärendruck ( mbar) bei Nenndrehzahl und Antrieb mit Drehstrommotoren. Betriebsflüssigkeit ist Wasser mit C. Die Toleranz des Saugvermögens beträgt %, die des Leistungsbedarfs + %. Bei abweichenden Betriebsbedingungen (z.b. abweichende Daten des zu fördernden Gases oder der Betriebsflüssigkeit, Mitförderung von Zusatzflüssigkeit, Förderung von Gas-Dampf gemischen) ändern sich die Kennlinien. Suction capacity and power consumption depending on inlet pressure The characteristics are applicable for compression of C (68 F) dry air from inlet pressure to atmospheric pressure ( mbar / inch Hg a) for nominal speed and drive with three phase motors. Ring liquid is water at C (9 F). The tolerance of the suction capacity is % and of the power consumption + %. With different operating conditions the characteristic curves change (e.g. differing gas operating liquid conditions, conveying of additional liquids and/or pumping of gas-steam mixtures). /
3 VZ- / / 8 II / G Maßzeichnung / Dimensional drawing Daten und Maße / Data and dimensions Hz / cycles 6 Hz / cycles Gewicht/Weight Anschlüsse / Connections Type BG/FS /min kw H /min kw H kg lbs U B U C U e U e U L U m U S U V VZ- L,. 7,. 9 VZ- M,. 7, 7. G / G / G / G / G / G / G / G / VZ-8 S, ,. 9 Type BG/FS a m m z z AD LB VZ- L VZ- M VZ-8 S BG = Baugröße, gilt für IE und IE-Motoren Abhängig von der Ausführung des Motors Flanschanschlussmaße nach EN 9- N und ANSI B 6. FS = Frame size, valid for IE motors and IE motors (subtype ) Depending on the motor design Flange connecting dimensions according to EN 9- N and ANSI B 6. VZ- / / 8 auch in Grundplattenbauweise erhältlich. Siehe rospekt Grundplatten-Bauweise: VZ-G / G / 8G VZ- / / 8 also available in base plate version. See brochure base plate version: VZ-G / G / 8G Schnittzeichnung / Sectional drawing Anschlüsse / Connections U B Anschluss für Betriebsflüssigkeit Connection for operation liquid U C Kavitationsschutz Cavitation protection U e Entleerung (Verschlussschraube) Drainage (screwed plug) U L Anschluss für Belüftungsventil Vacuum relief valve connection U m Anschluss für Manometer ressure gauge connection U S Anschluss für Sensor Connection for sensor U V Anschluss für Entleerungsventil Connection for drainage valve Teileliste / art list 7 Gleitringdichtung Mechanical seal 6 Sauggehäuse Suction casing 7 Druckgehäuse Discharge casing /. Mittelkörper Stage casing 7-. Steuerscheibe Inter casing /. Laufrad Impeller 6 Lagerdeckel Bearing cover -. Dichtring Sealing ring /. O-Ring O-ring Abstandshülse Distance sleeve Scheibe Disk 6 Kerbstift Grooved pin 6 Zylinderstift arallel pin 9/. 6-kt. Schraube Hexagon head cap screw 9-. Verschlussschraube Screwed plug 9 Innen-6-kt. Schraube Hexagon socket head cap screw 9/. assfeder Feather key 97 Typenschild Name plate / 96.9
4 VZ- / / 8 Hz Kennlinien / Characteristic curves 6 Hz Kennlinien / Characteristic curves inlet pressure p [inch Hg a] inlet pressure p [inch Hg a] [m /h] VZ-8 [CFM] Saugvermögen 7 VZ-8 VZ- VZ- VZ- VZ- 8 6 Suction capacity 7 [kw] 7 6 VZ-8 8 [H] Leistungsbedarf VZ-8 VZ- VZ- VZ- VZ- 6 ower consumption [l/min] Wasserbedarf 6 VZ- / / VZ- / / [GM] Water requirement Hz-cycles /min - rpm 6 Hz-cycles 7 /min - rpm Saugvermögen und Leistungsbedarf in Abhängigkeit vom Ansaugdruck Die Kennlinien gelten bei Verdichtung trockener Luft von C vom Ansaugdruck auf Atmosphärendruck ( mbar) bei Nenndrehzahl und Antrieb mit Drehstrommotoren. Betriebsflüssigkeit ist Wasser mit C. Die Toleranz des Saugvermögens beträgt %, die des Leistungsbedarfs + %. Bei abweichenden Betriebsbedingungen (z.b. abweichende Daten des zu fördernden Gases oder der Betriebsflüssigkeit, Mitförderung von Zusatzflüssigkeit, Förderung von Gas-Dampf gemischen) ändern sich die Kennlinien. Suction capacity and power consumption depending on inlet pressure The characteristics are applicable for compression of C (68 F) dry air from inlet pressure to atmospheric pressure ( mbar / inch Hg a) for nominal speed and drive with three phase motors. Ring liquid is water at C (9 F). The tolerance of the suction capacity is % and of the power consumption + %. With different operating conditions the characteristic curves change (e.g. differing gas operating liquid conditions, conveying of additional liquids and/or pumping of gas-steam mixtures). / 96.9
5 VZ Blockbauweise Closed coupled version Baureihe VZ Typenschlüssel / VZ Series Type Code Beispiel Example VZ umpentype ump type umpengröße ump size T Werkstoffausführung Material design Zählnummer Sequence number T: Schlüssel Werkstoffausführung / Code material design Schlüssel / Code 6 Typ / Type VZ- / / / / 8 VZ-/ VZ- / / / / 8 VZ- / / 8 Sauggehäuse Suction casing EN-GJL- EN-GJL-.8 Druckgehäuse Discharge casing EN-GJL- EN-GJL-.8 Steuerscheibe Inter casing....7, SiC-beschichtet CrNiMo-steel, SiC coated Mittelkörper Stage casing EN-GJL- EN-GJL-.8 Laufrad Impeller.8 CuSn Bronze CuSn Bronze.8 Welle Shaft....7 CrNiMo-steel Gleitringdichtung Mechanical seal Kohle, Edelstahl, FKM Carbon, Stainless steel, FKM EN-GJL- = EN-JL = GG- = FGL / 96.9
VI 2 II 2 G. Maßzeichnung / Dimensioned drawing. Daten / Data. Schnittzeichnung / Sectional drawing. Anschlüsse / Connections
VI II G einstufig - mit internem Wasserrückhaltesystem single-stage - with internal water restraining system Maßzeichnung / Dimensioned drawing Daten / Data Hz / cycles 6 Hz / cycles Gewicht/Weight Anschlüsse
MehrV-6 II 2 G. Maßzeichnung / Dimensional drawing. Daten / Data. Schnittzeichnung / Sectional drawing. Anschlüsse / Connections
V- II G Maßzeichnung / Dimensional drawing Daten / Data 5 Hz / cycles Hz / cycles Gewicht/Weight Anschlüsse / Connections Type BG/FS 1/min kw H 1/min kw H kg lbs U B U C U e U L V- 3 5,.5 35,5.7 9,3 1
MehrVH 20 / VH 40 / VH 60
VH 2 / VH 4 / VH 6 II 1/2 G Maßzeichnung / Dimensioned drawing VH 2 VH 4 VH 6 Anschlüsse / Connections U B Anschluss für Betriebsflüssigkeit Connection for operation liquid U e Entleerung (Verschlussschraube)
MehrVG 30 / 55 II 2 G * * * Maßzeichnung / Dimensioned drawing. Daten und Maße / Data and dimensions. Anschlüsse / Connections
VG 3 / II G Maßzeichnung / Dimensioned drawing Daten und Maße / Data and dimensions Hz / cycles Hz / cycles Gewicht/Weight Anschlüsse / Connections Type BG/FS 1/min kw H 1/min kw H kg lbs U B U e U L VG
MehrFlüssigkeitsring-Vakuumpumpen Blockbauweise. Liquid ring vacuum pumps Closed coupled version
Blockbauweise Closed coupled version VI / V / VG / VN / VZ Blockbauweise Closed coupled version Baureihe VI Die Wassersparer mit internem Wasserrückhaltesystem Einstufig Mit internem Wasserrückhaltesystem
MehrAnschlüsse Connections. Wasser Water Type mm ~ 1/min kw HP 1/min kw HP G S G D U e* Nm kg lbs t max CY-4281-MK-HT 71 1,0 1.34
CY-48-MK-T Wärmeträgerpumpen mit eripheralrad eat transfer pumps with peripheral impeller Maßzeichnung / Dimensional drawing Daten / Data Baugröße Frame size hasen hases 5 z / Cycles 6 z / Cycles Anschlüsse
Mehr1, 3. Anschlüsse Connections. Water Type mm ~ 1/min kw HP 1/min kw HP G S G D Ue* Nm kg lbs t max NPY-2251-MK-HT. Teileliste / Parts list
NY-5-MK-T Wärmeträgerpumpen mit eripheralrad eat transfer pumps with peripheral impeller Maßzeichnung / Dimensional drawing,,,, Daten / Data Baugröße hasen Frame size hases 5 z / Cycles 6 z / Cycles Anschlüsse
MehrDS-60 /... / DS-960. Maßzeichnung / Dimensional drawing. Daten / Data. Teileliste / Parts list. Schnittzeichnung / Cross-sectional drawing
DS- /... / DS-9 Drehschieberumen mit Gleitringdichtung, selbstansaugend Roller vane ums with mechanical seal, self-riming Maßzeichnung / Dimensional drawing Daten / Data Baugröße Frame size Phasen Phases
MehrVerdrängerpumpen - Drehschieberpumpen DS - mit Gleitringdichtung DS-MK - mit Magnetkupplung
Verdrängerumen - Drehschieberumen DS - mit Gleitringdichtung DS-MK - mit Magnetkulung Tuma Pumensysteme GmbH A-3 Wien, Eitnergasse Tel.: +3 () 9 93 Fax: +3 () 9 contact@tumaumen.at www.tumaumen.at DS-
MehrFlüssigkeitsring-Vakuumpumpen
Grundplattenbauweise Base plate version VU / VH / VZ Grundplattenbauweise Base plate version Baureihe VU Robuste und bewährte Technik für Grobvakuum Einstufig VU- bis VU- ohne Ventile VU-3 bis VU-1 mit
MehrDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV2 L_200 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV2
MehrSmall pumps with magnetic coupling
Kleinpumpen Mit Magnetkupplung Small pumps with magnetic coupling Speck umpen Lösungen für die Zukunft Speck umpen Solutions for the future Medizintechnik Nachspeisung Desinfektion Laserkühlung Schweißmaschinen
MehrAbmessungen Dimensions
D E Abmessungen Dimensions 0030 A, 0060 A A B G1 G1 C (35) H F J G M I 0080 A, 0110 A, 0150 A A DN 1 B DN 1 140 60 D E C F ø 15 M G I Abmessungen Dimensions A B C D E F G H I J M DN 1 (PN 16) 0030 A 1
MehrSPECK. Zubehör für Vakuumpumpen - accessoires for vacuum pumps
SPECK Zubehör für Vakuumpumpen accessoires for vacuum pumps Produktionsprogramm/ production program Seitenkanalpumpen side channel pumps Kleinkreiselpumpen small centrifugal pumps Wärmeträgerölpumpen thermal
MehrHeat transfer pumps with peripheral impeller and magnetic coupling. motralec
TOE / NY-2251-MK Wärmeträgerpumpen mit eripheralrad Maßzeichnung / Dimensioned drawing / Dessin coté eat transfer pumps with peripheral impeller motralec 4 rue Lavoisier. ZA Lavoisier. 95223 ERBLAY CEDEX
MehrAbwasserpumpen Baureihe AWP Sewage Water Pumps Series AWP
Beschreibung Abwasserpumpen der Baureihe AWP sind einstufi ge normalsaugende Kreiselpumpen in Blockbauweise. Das Laufrad sitzt direkt auf der Motorsonderwelle aus Edelstahl. Description Sewage water pumps
MehrFlüssigkeitsring -Vakuumpumpen/ - Kompressoren Liquid ring vacuum pumps/ compressors. Serie/Series L-BV2. Ersatzteilliste Spare part list
Flüssigkeitsring -Vakuumpumpen/ - Kompressoren Liquid ring vacuum pumps/ compressors Ersatzteilliste Spare part list Serie/Series L-BV2 Typ / Type 2BV2060 2BV2061 2BV2070 2BV2071 Gardner Denver Deutschland
MehrS_200 Types 2BL2 041... 2BL2 341
S_2 Types 2BL2 41... 2BL2 341 3 m³/h 2 26 24 Hz 3 1 1 ft³/min ft³/min 1 1 3 2 26 24 6 Hz 3 23 L 1 ft³/min 1 22 2 1 22 L 12 12 22 2 1 23 L 12 16 14 12 1 6 4 2 22 L 9 9 1 6 6 12 L 3 3 2 4 6 mbar 1 16 9 14
MehrSmall pumps With magnetic coupling
Kleinpumpen Mit Magnetkupplung Small pumps With magnetic coupling Speck umpen Lösungen für die Zukunft Speck umpen Solutions for the future Medizintechnik Nachspeisung Desinfektion Laserkühlung Schweißmaschinen
MehrIMM. Eintauchpumpen mit offenem Laufrad Immersion pumps with open impeller. Leistungsdaten / Performance. n 2850 1/min
Werkstoffe / Materials Teile-Benennung / Description Pumpengehäuse Pump casing Laufrad Impeller Rotorwelle Shaft Deckel Cover Spritzring Deflector IMM 40-50 IMM 63-100 Aluminium / Stahl / GG Aluminium
MehrSmall pumps with magnetic coupling
Kleinpumpen Mit Magnetkupplung Small pumps with magnetic coupling Speck umpen Lösungen für die Zukunft Speck umpen Solutions for the future Medizintechnik Nachspeisung Desinfektion Laserkühlung Schweißmaschinen
MehrFlüssigkeitsring Vakuum Liquid-Ring Vacuum GS ZB EF
Flüssigkeitsring Vakuum Liquid-Ring Vacuum GS ZB EF Bauart und konstruktive Merkmale Type of constructions and characteristics 4 Kennlinien haracteristic curves 5 Maßtabellen und Gewichte Dimensions Tables
MehrVacuum. Vakuum. Modul 3 Module 3 155
Auswahldaten Schrauben-pumpen Selection data for screw vacuum pumps 154-161 Reihe VSA VSA range 156-157 Reihe VSB VSB range 158-159 Reihe VSI VSI range 160-161 Modul 3 Module 3 155 VSA VSA 150 (30) 330
MehrS_200 Types 2BL BL1 341
S_2 Types 2BL2 41... 2BL1 341 3 m³/h 28 5 Hz 3 m³/h 28 6 Hz 343 L 26 26 24 342 L 24 283 L 22 22 2 18 282 L 2 18 253 L 16 252 L 16 14 14 12 12 1 8 6 4 2 142 L 12 L 62 L 42 L 1 8 6 4 2 13 L 63 L 43 L 2 4
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
Mehrdirektgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrTKreiselpumpen Typ T. Centrifugal pumps type T
TKreiselpumpen Typ T Centrifugal pumps type T Eigenschaften. Properties.. Sehr hoher Wirkungsgrad durch strömungstechnisch günstig geformtes Laufrad Very high efficiency because of flow favorable formed
MehrOnderdeellijst & Onderdeeltekening
. Onderdeellijst & Onderdeeltekening BADU 2-50 Teil St. Artikel-Nr. Druckgehäuse, mit Schlauchtüllen 52/52 mm Pressure housing, with nozzle 52/52 mm 2923.60.70 07 Druckgehäuse, mit Gewinde G 2 3/4 Pressure
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrTKreiselpumpen. Centrifugal Pumps
TKreiselpumpen Centrifugal Pumps Die KNOLL-Kreiselpumpe steht für viele Vorteile. The KNOLL centrifugal pump type T has many advantages.. Hohe Belastbarkeit aufgrund solider Wellen- Nabenverbindung High
Mehr(554.4) Zeichnungs-Nr. Drawing no. VW VW
1-81 411 800 90.5 161 901. 554.8 516 9 30 410 433 914.1 (554.4) 107 41.13 903 41. 16 BADU 1-81 gültig ab valid from Feb. 016 Teil St. Artikel-Nr. Benennung Description Part Qty. Article no. Druckgehäuse,
MehrTKreiselpumpen Typ T. Centrifugal pumps type T
TKreiselpumpen Typ T Centrifugal pumps type T Eigenschaften. Properties.. Sehr hoher Wirkungsgrad durch strömungstechnisch günstig geformtes Laufrad Very high efficiency because of flow favorable formed
MehrSerie/Series L-BV5. Typ / Type 2BV5 110 2BV5 111 2BV5 121 2BV5 131 2BV5 161. Alle Rechte vorbehalten. All rights reserved.
Flüssigkeitsring -Vakuumpumpen/ - Kompressoren Liquid ring vacuum pumps/ compressors Ersatzteilliste Spare part list Serie/Series L-BV5 Typ / Type 2BV5 110 2BV5 111 2BV5 121 2BV5 131 2BV5 161 Gardner Denver
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 111 Type 111. direktgesteuert mit Trennmembrane flüssigkeitsgedämpft
direktgesteuert mit Trennmembrane flüssigkeitsgedämpft direct acting with isolating diaphragm fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite
MehrGewinde- Sicherheits- / Entlastungsventile, in Eckform Thread Safety- / Relief-Valves, right angle
1 2 3 4 5 6 7 8 9 10 11 12 13 Kundeninformationen, Produktübersicht Customer information, Product Range Verkaufsbedingungen Terms of delivery and sale Gewinde- Sicherheits- / Entlastungsventile, in Eckform
MehrBelüftungsventile / Unter- und Überdruckventile Vacuum Relief Valves / Vacuum- and Pressure Relief Valves. Inhaltsverzeichnis Index
Belüftungsventile / Unter- und Überdruckventile Vacuum Relief Valves / Vacuum- and ressure Relief Valves 12 Inhaltsverzeichnis Index Ventil Valve Typ 9 Typ 90 Typ 91 Verwendung Use Belüftungsventil Vacuum-
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrV-VC 50 75 100 150. 60 Hz. 50 Hz
V-VC 50 75 100 150 Ölüberflutete Drehschieber-Vakuumpumpe mit Saugvermögen 50 bis 180 m³/h, max. Endvakuum 0,1 mbar (abs.). Flanschmotor, doppelseitige Rotorlagerung, Öl/Luftkühler. Feinsiebfilter, saugseitiges
MehrDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series LBL2 S_2 Flüssigkeitsringpumpen mit integriertem Betriebswasserkreislauf Liquid ring pumps with integrated closed circuid system
MehrERSATZTEILLISTE / LIST OF SPARE PARTS
ERSATZTEILLISTE / LIST OF SPARE PARTS Sept-2011 1.1 F11099002 1 Set Schrauben-Rahmendichtung Separatoreinlauf screw set inlet 1a 12 Sechskantmutter ISO 8673 - M8 A4 (DIN 934) hexagon nut ISO 8673 - M8
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrErsatzteil-Liste Spare Part List Preise gültig ab Price valid from 1st April 13 Techn. Stand: State of Art:
Seite/page: Preise gültig ab 0.0.3 Price valid from st April 3 Techn. Stand: 03-06 State of Art: 03-06 07-605 Distanzring distance ring 07-680 Scheibe washer 07-68 Rotor 5. rotor 5. 07-685 Abdeckung cover
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrKipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN Class 75 / 150, Size 12"... 40"
WASSERARMATUREN Valves for drinking and sewage water Kipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN 00... 1000 Class 75 / 150, Size 12"... 40" Kipp-Rückschlagklappen Typ
MehrLinn-Pumpen GmbH. Gewerbering 15 D Schalksmühle Telefon: +49 (0) Telefax: +49 (0)
inn-n GmbH GS Unterwassermotorpumpen für 4" - Tiefbrunnen GS Submersible s for 4 Wells Anwendungsbereiche - Wasserversorgungsanlagen - Beregnungsanlagen - Druckerhöhungsanlagen - Feuerlöschanlagen Technische
MehrKleinpumpen Mit Magnetkupplung. Small pumps With magnetic coupling. Petites pompes À entraînement magnétique
Anwendungsgebiete / Applications / Domaines d Application Anwendungsgebiete Medizintechnik Nachspeisung Desinfektion Laserkühlung Schweißmaschinen Brennerkühlung Schienenfahrzeuge Transformatorenkühlung
MehrERSATZTEILLISTE / LIST OF SPARE PARTS
ERSATZTEILLISTE / LIST OF SPARE PARTS F10105103 Sept-2011 1.1 F11099002 1 Set Schrauben-Rahmendichtung Separatoreinlauf screw set inlet 1a 12 Sechskantmutter ISO 8673 - M8 A4 (DIN 934) hexagon nut ISO
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
MehrVGA VGA Hz Auswahldiagramm Selection diagram 60 Hz Auswahldiagramm Selection diagram
VGA VGA 4 6 Ölüberflutete Drehschieber-Vakuumpumpe mit Saugvermögen 4 bis 7,2 m³/h, max. Endvakuum 20 mbar (abs.). Geringer Platzbedarf durch einseitige Rotorlagerung, integrierter Motor, Luftkühlung,
MehrERSATZTEILLISTE / LIST OF SPARE PARTS. Green Bedding Separator FAN F
ERSATZTEILLISTE / LIST OF SPARE PARTS Februar 2014 5k - 5n 5j 5g 5b 5c 5f 5h 5e 5.1 5.2 5d 5.3 5.4 5.5 11a 11b 11c 11d 11e 5i 5a 6 18 19 17 1a 1b 1c 1.1 1.2 1d 13c 13a 13 13d 13b 7 8 26 2n 2c 2e 24 23
MehrPL 100 PL 200 PL 300 PL 400. Abmessungen/ Dimensions. Gewicht: / Weight: 99 kg (218 lbs) Gewicht: / Weight: 110 kg (243 lbs)
PL 100 99 kg (218 lbs) PL 200 110 kg (243 lbs) PL 300 119 kg (262 lbs) PL 400 132 kg (291 lbs) 1/5 Bauform 1 Anschlussstutzen mit Anschlussflansch und O-Ring Dichtung in mm / inches (ca.) Design 1 Short,
MehrERSATZTEILLISTE / LIST OF SPARE PARTS. Green Bedding Separator FAN F
ERSATZTEILLISTE / LIST OF SPARE PARTS Februar 2015 5k - 5n 5j 5g 5b 5c 5f 5h 5e 5.1 5.2 5d 5.3 5.4 5.5 11a 11b 11c 11d 11e 5i 5a 18/18a 19/19a 1a 6 1b 17/17a 1c 1.1 1.2 1d 13c 13a 13 13d 13b 7 8 26 2n
MehrMotorenreihe Einphasen Wechselstrom
Einphasen Wechselstrommotorensingle phase motors enreihe Einphasen Wechselstrom line single-phase Eckdaten Key data n s Gehäusematerial Frame material Number of poles Leistung Output 63 bis 100 63 to 100
Mehr/ Technische Änderungen und drucktechnische Irrtümer vorbehalten.
EZ-0225-V10 Air Bearing Spindle High accurancy air bearing spindle with direct drive. Equipped with an water-cooled synchronous motor (frequency at nominal speed 400 Hz), Power output 1880 W. Rotary encoder
MehrTragkraftspritze ZL 500 Portable Pump ZL 500
Tragkraftspritze ZL 500 Portable Pump ZL 500 feuerlöschtechnik fire fighting Pumpe Pump JOHSTADT Feuerlöschkreiselpumpe (einstufig) aus seewasserbeständiger Aluminiumlegierung mit Pumpenwelle aus Edelstahl,
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
MehrERSATZTEILLISTE / LIST OF SPARE PARTS
ERSATZTEILLISTE / LIST OF SPARE PARTS F101 21530 Juli 2016 5k - 5n 5j 5g 5b 5c 5f 5h 5e 5.1 5.2 5d 5.3 5.4 5.5 25a 25b 25c 25d 25e 5i 5a 6 29 30 28 31/32a 31/32e 31/32b 1a 1b 1c 1.1 1.2 1d 19d 19b 19a
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrERSATZTEILLISTE / LIST OF SPARE PARTS
ERSATZTEILLISTE / LIST OF SPARE PARTS Sept-2011 1.1 F11099002 1 Set Schrauben-Rahmendichtung Separatoreinlauf screw set inlet 1a 12 Sechskantmutter ISO 8673 - M8 A4 (DIN 934) hexagon nut ISO 8673 - M8
Mehr90/7, 90/11, 90/13, 90/15, 90/15 G, 90/ /20 G
OPEN AUF OUVRIR 90/7, 90/11, 90/13, 90/15, CLOSE ZU FERMER 507 516 800 113 900 412.2 161.2 894.1 230 260 914.2 595 554.2 412.5 412.6 433 174.2 160.2 160.1 412.1 143 101 412.4 903 12 BADU 90/7, 90/11, 90/13,
MehrX-L GK X-L 20 GK X-L 30 GK X-L 40 GK X-L 50 GK X-L 75 GK X-L 100 GK. Kompressoren. Auswahldiagramm
Kompressoren X-L GK X-L 20 GK X-L 30 GK X-L 40 GK X-L 50 GK X-L 75 GK X-L 100 GK Luftgekühlte, frischölgeschmierte Drehschieber-Kompressoren mit Volumenströmen von 120 bis 540 m³/h und etriebsüberdrücke
MehrMotorenreihe Einphasen Wechselstrom
enreihe Einphasen Wechselstrom line single-phase Eckdaten Key data n s Gehäusematerial Frame material Number of poles Leistung Output 63 bis 100 63 to 100 Aluminium Aluminum 2 und 4 2 and 4 0,12 bis 3
MehrCatalogue sheet / Katalogblatt 2BE
Catalogue sheet / Katalogblatt 2BE1 253-0 Liquid Ring Flüssigkeitsring Vacuum pump Vakuumpumpe Main applications 2BE1 pumps are ideally suited for general industry applications and for higher demands of
MehrERSATZTEILLISTE / LIST OF SPARE PARTS
ERSATZTEILLISTE / LIST OF SPARE PARTS F101 21530 Februar 2014 5k - 5n 5j 5g 5b 5c 5f 5h 5e 5.1 5.2 5d 5.3 5.4 5.5 25a 25b 25c 25d 25e 5i 5a 6 29 30 28 31/32a 31/32e 31/32b 1a 1b 1c 1.1 1.2 1d 19 21 20
MehrGasring-Vakuumpumpen/- Ersatzteilliste Kompressoren Spare part list Serie/Series G-BH7
Gasring-Vakuumpumpen/- Kompressoren Ersatzteilliste Spare part list Serie/Series G-BH7 Typ / Type 2BH7 Gardner Denver Deutschland GmbH Postfach 1510 97605 Bad Neustadt / Saale Germany Tel.: +49 7622 392
MehrGlue application-system LK"0 PUR
LK"0 PUR 2 3 4 5 6 7 8 9 10 11 1 14 13 12 3, 4, 5 Set of joint PUR 55 2235 1, 2, 3, 4, 5, 7, 8 Set of repair PUR 55 2236 1 Pin 55 2201 2 Pistol head PUR, opening 5 mm 55 2239 3 Joint 55 2203 4 Sealing
MehrCompressed air - dewpoint 10K under ambient temperature - ISO8573-1, Kl. 3 Durchflussrichtung Flow direction EIN: von 1-2 AUS: von 2 3
3/2 Wegeventil mit PIEZO-Pilotventil Baureihe P20 3/2 way valve with Piezo-pilot valve Series P20 P20 381RF-* NW 2 Eigenerwärmungsfrei Ein Produkt für alle Ex-Bereiche Kompatibel zu Microcontrollern Kompatibel
MehrV-VC V-VC 400 V-VC 500 V-VC 700 V-VC 900. Auswahldiagramm Selection diagram 50 Hz 60 Hz
V-VC V-VC 400 V-VC 500 V-VC 700 V-VC 900 Ölüberflutete Drehschieber-Vakuumpumpen mit I3 Motoren nach UL 1004 Saugvermögen 400 bis 695 m 3 /h, ndpartialdruck 0,1 mbar (abs.). lanschmotor, doppelseitige
MehrErsatzteil-Liste R 136 Spare Parts List R
210 420 210 420 mit Zwischenplatte außen with separation plate outside Mit Inkrafttreten dieser Ersatzteil-Liste werden alle vorherigen Ersatzteil-Listen dieser Baureihe ungültig. With publication of this
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
MehrVakuumpumpen und Kompressoren in Blockbauweise Vacuum pumps and compressors in monoblock design
Vakuumpumpen und Kompressoren in Blockbauweise Vacuum pumps and compressors in monoblock design Leistungsstärke auf kleinstem Raum Ob Sterilisatoren oder Medizin- und Labortechnik: Flüssigkeitsring-Vakuumpumpen
MehrC019 C006 C001. gültig ab / valid from: Vorgängerversion / previous version: gültig bis / valid to: Nachfolgeversion / follow-up version:
Ersatzteilzeichnung Oberkasten OES mini easytouch Spare part drawing upper casing OES mini easytouch ETZ C - Oberkasten ET 89MP 1 / 1 C C009 OES mini easytouch C020 C013 C017 C019 C016 C015 C005 C007 A018
MehrERSATZTEILLISTE / LIST OF SPARE PARTS
ERSATZTEILLISTE / LIST OF SPARE PARTS März 2013 SEPARATOR PSS 3.3-780 BRU 6 18 19 17 20a 5n 1a 1b 1c 5j 5g 5b 5c 1.1 1d 5f 5h 5e 5.1 5.2 5d 5.3 5.4 5.5 1.2 35 34 5i 13d 5a 13c 13a 13 13b 11 7 12a 8 26
MehrAbwasserpumpen Baureihe AWP Sewage Water Pumps Series AWP
AWP 80-200 Beschreibung Die Abwasserpumpen der Baureihe AWP sind einstufige normalsaugende Kreiselpumpen mit großem freien Durchgang. Typenschlüssel AWP-F 25-125 - XX Ausführungscode Laufradnenndurchmesser
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrQ-Motor Multifunktionsmotor. Q-motor multi-function motor
Multifunktionsmotor multi-function motor Leistungsdaten Performance data Spannung voltage Frequenz frequency Drehzahl speed Leistungsabgabe power output Leistungsaufnahme power input Stromaufnahme current
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrTechnische Daten. Technical Data. Radialventilatoren Baureihe RG..A / RD..A. Centrifugal fans Series RG..A / RD..A
Technische Daten Radialventilatoren Baureihe RG..A / RD..A Technical Data Centrifugal fans Series RG..A / RD..A Radialventilatoren Baureihe RG..A/RD..A Lieferumfang Standardausführung Spannung ~ ± % ~
Mehr3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrClick the relevant product in the table of content
Content Glueing System Click the relevant product in the table of content Page Glueing System LK 0 PUR... 2 LK 110... 3 LK 102... 4 LK 100... 5 LK 10... 6 LK 5... 7 LK 5 PUR... 8 LK 3... 9 LK 0... 10 LK
MehrSafety Valves Mini-S Sicherheitsventile Mini S
Safety Valves Mini-S Sicherheitsventile Mini S Type Series SM Type tested bauteilgeprüft TÜV SV 01-972 Type tested acc. to SME bauteilgeprüft nach SME Created / Erstellt Checked / Geprüft Quotation / ngebot
MehrRFL 60 RFL 100. Ersatzteilliste Spare Part List T-ET US-12-04
Ersatzteilliste Spare Part List Gardner Denver Wittig GmbH Johann-Sutter-Straße 6 + 8 D-79650 Schopfheim Tel. +49 7622 3 94-0 Fax +49 7622 3 94-2 00 E-mail: info@gdwittig.de http://www.gdwittig.de 2 Inhaltsverzeichnis
MehrSpindelbremse Bremsbacken Brake pad
Pos. Bezeichnung Designation 177 Dichtung Gasket 1 03401000177 178 Dichtring Gasket 1 RWDR-25x40x10 03401000178 179 Kugellager Ball bearing 1 6005 03401000179 180 Keilriemenscheibe Pulley 1 03401000180
MehrErsatzteilliste Spare Part List WITTIG RFW. Typ 150-260 T-ET-1100-1-US-06-05
Ersatzteilliste Spare Part List WITTIG RFW Typ 150-260 2 Inhaltsverzeichnis Content Seite Abbildung RFW 150-260 4 Ersatzteile RFW 150-260 5 Page Figure RFW 150-260 4 Spare parts RFW 150-260 5 Bitte Beachten!
MehrPressure. Druck. Modul 3 Module 3 65
Druck Auswahldaten Drehschieberverdichter Selection data for rotary vane compressors 64-73 Reihe DTE DTE range 66-67 Reihe DLT DLT range 68-69 Reihe DTA DTA range 70-71 Reihe DTR DTR range 72-73 Modul
MehrV 136 Q VVA V 136 Q VVA
Ersatzteil-Liste V 136 Q VVA mit Ölschmierung Spare Parts List V 136 Q VVA with oil lubricated seals Mit Inkrafttreten dieser Ersatzteil-Liste werden alle vorherigen Ersatzteil-Listen dieser Baureihe ungültig.
MehrC612 - C912. form 1 2 2a 3 IMB3 ) * IMB6 * ) IMB7 ) * IMB8 IMV5 * )
Montagehinweis Schmierarmaturen für STÖBER MGS Getriebe C de ID 446.0 Seite von 6 Kieselbronner Straße 7577 Pforzheim Postfach 900 7509 Pforzheim Phone +49 7 58-0 Fax +49 7 58-000 Allgemeine Hinweise:
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrIKA Service-Manual Overhead Stirrer / Rührwerk EUROSTAR 200 digital S1 IKA ID: Version: USA / JAPAN ( V)
IKA Service-Manual Overhead Stirrer / Rührwerk EUROSTAR 200 digital S1 IKA ID: 39900.01 Version: USA / JAPAN (100-115V) IKA IKA Werke GmbH & Co. KG Janke & Kunkel-Str. 10 D - 79219 Staufen Phone: +49 (0)7633
MehrMehrstufig für Flüssiggas Multistage for liquid gas NHE 4 / NHE 6 / NHE 100 / NHE 125
Mehrstufig für Flüssiggas Multistage for liquid gas NHE / NHE / NHE 1 / NHE Bauart und konstruktive Merkale Tye of constructions and characteristics Kennlinien Characteristic curves 3 Maßtabelle Diension
MehrOPTIMUM. 7 Ersatzteile - Spare parts - B34H/ B34H Vario. 7.1 Ersatzteilzeichnung B34H - Explosion drawing B34H
OPTIMUM Ersatzteile - Spare parts - B34H/ B34H Vario 7 Ersatzteile - Spare parts - B34H/ B34H Vario 7.1 Ersatzteilzeichnung B34H - Explosion drawing B34H 7.1.1 Bohrkopf B34H - Drilling head B34H Abb.7-1:
Mehr