Technische Information / Technical Information

Größe: px

Ab Seite anzeigen:

Download "Technische Information / Technical Information"

Adrian Gerhardt Mann
vor 6 Jahren
Abrufe

1 Elektrische Eigenschften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Spitzensperrspannung T vj = - 25 C...T vj max V RRM 800 V repetitive peak forward reverse voltage 900 V 1000 V Stoßspitzensperrspannung T vj = + 25 C...T vj max V RSM 900 V non-repetitive peak reverse voltage 1000 V 1100 V Durchlaßstrom-Grenzeffektivwert I FRMSM 230 A RMS forward current Dauergrenzstrom T C =85 C I FAVM 138 A mean forward current T C =82 C 146 A Stoßstrom-Grenzwert T vj = 25 C, tp = 10 ms I FSM 1950 A surge foward current T vj = T vj max, tp = 10 ms 1600 A Grenzlastintegral T vj = 25 C, tp = 10ms I²t A²s I²t-value T vj = T vj max, tp = 10ms A²s Charakteristische Werte / Characteristic values Durchlaßspannung T vj = T vj max, i F = 450 A v F max. 2,4 V forward voltage Schleusenspannung T vj = T vj max V (TO) 1,32 V threshold voltage Ersatzwiderstand T vj = T vj max r T 2,2 mω forward slope resistance Spitzenwert der Durchlaßverzögerungsspannung IEC V FRM 9,5 V peak value of forward recovery voltage T vj = T vj max di F /dt=100a/µs, v R =0V Durchlaßverzögerungszeit IEC 747-2, Methode / method II t fr max. 1,1 µs forward recovery time T vj = T vj max, i FM =di F /dt*tfr di F /dt=100a/µs, v R =0V Sperrstrom T vj = 25 C, v R =V RRM i R max. 5 ma reverse current T vj = T vj max, v R = V RRM max. 40 ma Rückstromspitze DIN IEC 747-2, T vj =T vj max I RM 47 A peak reverse recovery current i FM =225A,-di F /dt=100a/µs Sperrverzögerungsladung DIN IEC 747-2, T vj =T vj max Q r 32 µas recovered charge i FM =225 A,-di F /dt=100a/µs Sperrverzögerungszeit DIN IEC 747-2, T vj =T vj max t rr 1,1 µs reverse recovered time i FM =225A,-di F /dt=100a/µs Sanftheit T vj = T vj max SR 0,003 µs/a 2) Softness i FM =225A,-di F /dt=100a/µs Richtwert für obere Streubereichsgrenze / Upper limit of scatter range (standard value) 2) Richtwert für untere Streubereichsgrenze / Lower limit of scatter range (standard value) SZ-M / 30. April 1993, R.Jöeke A 13/ 93 Seite/page 1

2 Thermische Eigenschaften / Thermal properties Innerer Wärmewiderstand Kühlfläche / cooling surface R thjc thermal resitance, junction to case beidseitig / two-sided, Θ =180 sin max. 0,141 C/W beidseitig / two-sided, DC max. 0,133 C/W Anode / anode, Θ =180 sin max. 0,224 C/W Anode / anode, DC max. 0,216 C/W Kathode / cathode, Θ =180 sin max. 0,344 C/W Kathode / cathode, DC max. 0,336 C/W Übergangs- Wärmewiderstand Kühlfläche / cooling surface R thck thermal resitance, case to heatsink beidseitig / two-sided max. 0,015 C/W einseitig / single-sided max. 0,030 C/W Höchstzulässige Sperrschichttemperatur T vj max 125 C max. junction temperature Betriebstemperatur T c op C operating temperature Lagertemperatur T stg C storage temperature Mechanische Eigenschaften / Mechanical properties Gehäuse, siehe Anlage Seite 3 case, see appendix page 3 Si-Element mit Druckkontakt Durchmesser/diameter 15mm Si-pellet with pressure contact Anpreßkraft F 1,7...3,4 kn clamping force Gewicht G typ. 65 g weight Kriechstrecke 17 mm creepage distance Feuchteklasse DIN C humidity classification Schwingfestigkeit f = 50Hz 50 m/s² vibration resistance Kühlkörper / heatsinks: K0,12F ; K0,17F ; K0,22F ; K0,36S ; K0,65S Mit dieser technischen Information werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Sie gilt in Verbindung mit den zugehörigen Technischen Erläuterungen./ The technical Information specifies semiconductors devices but promises no characteristics. It is valid in combination with the belonging technical notes. SZ-M / 30. April 1993, R. Jörke Seite/page 2

3 SZ-M / 30. April 1993, R. Jöeke Seite/page 3

4 Kühlung cooling Analytische Elemente des transienten Wärmewiderstandes Z thjc für DC Analytical ementes of transient thermal impedance Z thjc for DC Pos.n beidseitig R thn [ C/W] 0, ,0131 0,023 0,0335 0,0552 two-sided τ n [s] 0, , ,0281 0,134 0,529 0,0011 2,27 anodenseitig R thn [ C/W] 0, ,0246 0,0215 0,0799 0,0683 anode-sided τ n [s] 0, ,0132 0,064 0,412 1,88 0, ,8 kathodenseitig R thn [ C/W] 0, ,0277 0,022 0,0947 0,115 cathode-sided τ n [s] 0, ,0143 0,123 0,473 2,17 0, n max Analytische Funktion / analytical function : Z thjc = = R thn ( 1 - EXP ( - t / τ n )) n=1 SZ-M / 30. April 1993, R.Jörke Seite/page 4

5 i F [A] ,5 1 1,5 2 2,5 3 v F [V] Grenzdurchlaßkennlinie / Limiting 0n-state characteristic i F =f(v F ) T vj = T vj max SZ-M / 30. April 1993, R. Jörke Seite/page 5

6 Terms & Conditions of Usage Attention The present product data is exclusively subscribed to technically experienced staff. This Data Sheet is describing the specification of the products for which a warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its specifications. Changes to the Data Sheet are reserved. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. Should you require product information in excess of the data given in the Data Sheet, please contact your local Sales Office via / sales & contact. Warning Due to technical requirements the products may contain dangerous substances. For information on the types in question please contact your local Sales Office via / sales & contact.

Ähnliche Dokumente

Marketing Information D 56 S 40...45 D 56 U 40...45

European Power- Semiconductor and Electronics Company Marketing Information D 56 S 40...45 D 56 U 40...45 15 5,5 SW27 M12 Type Circuit symbol Cathode Anode S Connection pin Case U Case Connection pin Ma