SAN GrooviNG. AnnivErsAry. Buy 10 inserts and we include a free holder to suit. For radial grooving

Transkript

1 SAN GrooviNG For radial grooving AnnivErsAry offer 2012 * Cost-effective Extremely economical High accuracy User Friendly Buy 10 inserts and we include a free holder to suit * Valid until This promotion only includes products from this leaflet 50 jahre Arno -werkzeuge

2 For radial grooving ARNO SAN grooving holder with excellent insert clamping for external machining. Designation system Holder SAN S = Grooving A = External N = Neutral 01 1 = Generation -3 Groove width [mm] 17 Groove depth [mm] 1616 Shank dimensions [mm] Handing 2 ARNO -Werkzeuge SAN Grooving

3 Introduction Mono block holder for double sided inserts with groove width from 3 6 mm. Groove depth (ET max. ) 17 mm 27 mm Shank dimensions 16 x x 25 mm For grooving and groove turning Features and benefits Mono block holder. Strong clamping for reliable process security Strong insert clamping with fixed stop Accurate insert location, no pulling out of insert. Double sided inserts Economical arge choice of inserts for most materials Versatile Choice of ground and sintered inserts with application specific geometries. Always the right insert for the application For further information please ask for our complete catalogue. Please contact us. ARNO -Werkzeuge SAN Grooving 3

4 Holders Designation EB ET max h b l Kl Kh f SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 SAN , ,3 SAN R , ,3 Attention: Please pay attention to our cutting recommendations on pages 8 11 R Right-hand execution shown 4 ARNO -Werkzeuge SAN Grooving All dimensions are in mm

5 Standard geometry coated uncoated brazed Designation B α R Rake angle AP30 AH7520 AN /16 0, /16 0, /9,5 0, /9,5 0, /9,5 1, /8,5 0, /8,5 0, , , ,0 12 P M K N S H = Main application = Secondary application Copy-turning geometry -AM coated uncoated brazed Designation B α R Rake angle AP30 AH7520 AN AM 3, /15 0,2 6 / AM 4, /9,5 0,4 6 / AM 5, /8,5 0,4 6 / AM 6, ,8 6 /20 P M K N S H = Main application = Secondary application All dimensions are in mm ARNO -Werkzeuge SAN Grooving 5

6 Copy-turning geometry -12 coated uncoated brazed Designation B α R Rake angle AP30 AH7520 AN ,0 20,0 6/16 0, * 2,9 19,7 6/16 0, * 2,9 19,7 6/16 0, ,0 22,0 6/9,5 0, * 3,9 21,7 6/9,5 0, * 3,9 21,7 6/9,5 0, ,0 25,0 6/8,5 0, * 4,9 24,6 6/8,5 0, * 4,9 24,6 6/8,5 0, ,0 30,0 6 0,2 12 *Cermet P M K N S H = Main application = Secondary application Full-radius execution -V coated uncoated brazed Designation B α R Rake angle AP30 AH7520 AN V /16 1, V /9,5 2, V /8,5 2, V ,0 12 Attention: The use of full radius inserts may require a slight modification to the holder P M K N S H = Main application = Secondary application 6 ARNO -Werkzeuge SAN Grooving All dimensions are in mm

7 Full-radius execution -VK coated uncoated brazed Designation B α R Rake angle AT10 AP30 AH7520 AN VK /16 1, VK /9,5 2, VK /8,5 2, VK ,0 3 Attention: The use of full radius inserts may require a slight modification to the holder P M K N S H = Main application = Secondary application Aluminium type -AU coated uncoated brazed Designation B α R Rake angle AT10 AP30 AH7520 AN AU /16 0, AU , AU , AU ,2 25 P M K N S H = Main application = Secondary application All dimensions are in mm ARNO -Werkzeuge SAN Grooving 7

8 Cutting data Max. feed rate and depth of cut [mm / U] = Feed rate into solide [mm / U] = Feed rate for re-grooving [mm / U] = Feed rate for copy-turningn a p [mm] = Depth of cut Standard geometry ,05-0,12 0,07-0,18 0,07-0,18 0,07-0,18 0,05-0,12 0,07-0,18 0,07-0,18 0,07-0,18 0,05-0,10 0,05-0,10 0,05-0,10 0,07-0,15 a p max 0,50 0,50 0,50 0,50 Copy-turning geometry -AM AM AM AM AM 0,04-0,15 0,07-0,18 0,07-0,25 0,10-0,25 0,04-0,15 0,07-0,18 0,07-0,25 0,10-0,25 0,04-0,15 0,07-0,18 0,07-0,25 0,10-0,25 a p max 1,5 2,0 2,5 2,5 8 ARNO -Werkzeuge SAN Grooving All dimensions are in mm

9 Cutting data Copy-turning geometry ,05-0,15 0,07-0,18 0,07-0,18 0,07-0,18 0,05-0,15 0,07-0,18 0,07-0,18 0,07-0,18 0,05-0,10 0,07-0,18 0,07-0,18 0,07-0,18 a p max 1,5 2,0 2,5 2,5 Full-radius execution -V V V V V 0,05-0,10 0,05-0,10 0,05-0,10 0,07-0,12 0,05-0,10 0,05-0,10 0,05-0,10 0,07-0,12 0,05-0,10 0,05-0,10 0,05-0,10 0,07-0,12 a p max 0,50 0,50 0,50 0,50 Full-radius execution -VK VK VK VK VK 0,05-0,12 0,05-0,12 0,05-0,12 0,07-0,12 0,05-0,12 0,05-0,12 0,05-0,12 0,07-0,25 0,05-0,15 0,05-0,12 0,08-0,12 0,07-0,30 a p max 1,5 2,0 2,5 3,0 Aluminium type -AU AU AU AU AU 0,05-0,18 0,05-0,18 0,05-0,18 0,05-0,18 0,05-0,18 0,05-0,18 0,05-0,18 0,05-0,18 0,05-0,20 0,05-0,20 0,05-0,20 0,05-0,20 a p max 2,0 2,5 3,0 3,0 All dimensions are in mm ARNO -Werkzeuge SAN Grooving 9

10 Grade Description Coated carbide grades HC - P30, HC - M25, HC-K30 CVD-multilayer TiC + TiCN + TiN coating Machining steel, cast steel as well as grey cast iron, at medium to high cutting speeds, medium to large chip-cross-sections and varying depths of cut. Used for finishing and medium roughing. HC - P35, HC - M30 CVD-multilayer, substrate + TiC + TiCN + TiN coating Machining steel, stainless steel and cast steel, at medium to large chip-cross-sections and medium to low cutting speeds under unfavourable machining conditions where good toughness is required. HC - P40, HC - M35 CVD-multilayer coating, substrate + Al 2 O 3 + TiN Grade with a good combination of wear resistance and toughness for turning steel, stainless steel as well as cast steel at medium chip-crosssections and medium to high cutting speeds. Can also be used under unfavourable machining conditions. Special grade for stainless steel (austenitic). HC - P15, HC - K15 CVD-multilayer Al2O3 -coating, substrate + TiC + TiN + Al 2 O 3 For machining grey cast iron, cast iron with graphite and hard cast material. Also suitable for stainless steel, steel and cast steel at medium to high cutting speed. Apply in finishing and lighter roughing applications. HC - P25, HC - M20, HC - K20 CVD-multilayer Al2O3 -coating, substrate + TiC + TiN + Al 2 O 3 Machining of steel, stainless steel, spheroidal cast iron, cast steel and grey cast iron at high cutting speeds under stable machining conditions. AT10 HW - K10 PVD-multilayer coating, substrate + TiCN Grade for machining aluminium and aluminiumalloy, cooper, brass, non-ferrous materials and refractory metals at medium cutting and under favourable cutting conditions. Also suitable for stainless steel. HC-P40 PVD-Multilayer coating, + AlTiN An improved PVD coating on a tough and wear resistant carbide grade. Due to the higher cobalt content this grade contains all the required toughness for part-off and grooving applications. is excellent at machining most steel, stainless steel and hard to machine materials. Uncoated carbide grades HW - K10 Submicron carbide grade for machining cast materials, light and nonferrous materials, refractory metals, hardened steels up to 55 HRC. In connection with chipbreaker-au specially suitable for machining Al- and Cu-alloys. Cermet HT - P15, HT - M10, HT - K05 Machining of steel, steels with medium tensile strength as well as stainless steel and spheroidal cast iron. imited use on grey cast iron. For further information please ask for our complete catalogue. Please contact us. 10 ARNO -Werkzeuge SAN Grooving

11 Cutting data ISO Material Brinell hardness HB Cutting speed V C [m/min] AT10 Unalloyed steel and cast steel < 0,15% C / hardened and tempered ,15 0,45 % C / hardened and tempered > 0,45 % C / hardened and tempered P annealed ow alloyed steel hardened and tempered and cast steel hardened and tempered hardened and tempered High alloyed steel, high alloyed toolsteel annealed and cast steel hardened and tempered Stainless steel and ferritic / martensitic, annealed cast steel martensitic, hardened and tempered Stainless steel and austenitic and austenitic/ferritic, M cast steel chilled pearlitic, ferritic Cast iron pearlitic, martensitic K ferritic Cast iron with nodular graphite pearlitic Malleable cast iron ferritic pearlitic Aluminium alloys, long chipping not heat treatable heat treatable, heat - treated % Si, hardened Casted aluminium alloys 12% Si, heat treatable, hardened 90 12% Si, not heat treatable 130 ead alloys, Pb > 1% N Copper and copper alloys Brass, bronze (brass / bronze) Aluminium bronze Copper and electrolyte copper Duroplastics Non ferrous materials Re - inforced plastics Hard rubber Fe-alloyed, annealed Fe-alloyed, heat - treated S High temperature resistant alloys Ni- oder Co-Basis, annealed Ni- oder Co-Basis HRC, casting Ni- oder Co-Basis Nmm 2, heat - treated Titanium alloys, high strength Pure titan Alpha- and Beta- alloys, hardened hardened and tempered H Hardened steel hardened and tempered Hard cast iron casting Hardened cast iron hardened and tempered 55 HRC The datas given are only approximate values. It can be necessary to adjust these datas to the individual machining operation. ARNO -Werkzeuge SAN Grooving 11

12 itungszentren. nseil Uhr für Sie erreichbar. ccleshall. Staffordshire. ST21 6NF de. lia.it. Harvard, Illinois om Vladimir u.ru. Über unsere gebührenfreie Bestell-Hotline: 0800 / sind wir Mo. Do. von Uhr und Fr. von Uhr für Sie erreichbar. ARNO -Werkzeuge U_Drehen 20,5 mm_16-8:u_drehen 20, :50 Uhr Seite 1 ARNO WERKZEUGE Werkzeuge und Schneideinsätze zum Ein- und Abstechen Tools and inserts for parting and grooving V Ib Ein- und Abstechen ARNO WERKZEUGE Werkzeuge und Wendeschneidplatten zum Drehen und Gewindedrehen Tools and indexable inserts for turning and threading III c Drehen und Gewindedrehen Werkzeuge und Wendeschneidplatten zum Fräsen und Gewindefräsen Milling cutters and indexable inserts for milling and thread milling IV Fräsen und Gewindefräsen Outils et plaquettes de tronçonnage et rainurage Outils et plaquettes amovibles de tournage et filetage Outils et plaquettes amovibles de fraisage et filetage par fraisage w w w. a r n o. d e Tools and inserts for parting and grooving Tooling and indexable inserts for turning and threading Milling cutters and indexable inserts for milling and thread milling Wendeschneidplatten nd Gewindedrehen exable inserts threading rti di tornitura simplex.de Vb Bohren / Drilling / Foratura ARNO WERKZEUGE Werkzeuge und Wendeschneidplatten zum Bohren Tools and inserts for drilling Vb Bohren Utensili ed inserti di foratura Wendeschneidplatten d indexable inserts rti di Foratura ahmen ols mandrini Drilling tools and indexable inserts for drilling For further information please ask for our complete catalogue. Please contact us. Karl-Heinz Arnold GmbH Karlsbader Str. 4 D Ostfildern Tel.: +49 (0) 711/ Fax: +49 (0) 711/ info@arno.de ARNO (UK) imited Unit 3, Sugnall Business Centre Sugnall, Eccleshall Staffordshire ST21 6NF ( sales@arno.de ARNO Italia S.r.l Via J. F. Kennedy Vimercate (MB) ( / / info@arno-italia.it ARNO Swiss S.A. Schanzstraße 1. CH-8330 Pfäffikon ZH ( info@arno-swiss.ch ARNO Rouse USA,..C W. Diggins St. US Harvard, Illinois ( info@arno-rouse.com ARNO RU td. B.Nizhegorodskaya Str. 81 Office 809 RU Vladimir (/ 7 +7 (4922) сот +7 (920) info@arnoru.ru agencyteam ARNO UK