PLG STG SG gearboxes/ PLG STG SG Getriebe

Größe: px
Ab Seite anzeigen:

Download "PLG STG SG gearboxes/ PLG STG SG Getriebe"

Transkript

1 PLG STG SG gearboxes/ PLG STG SG Getriebe Planetary gearboxes (PLG) have the highest continuous torque capacity of all types of gearbox; at the same time they have a very compact design, low weight and excellent efficiency. In our planetary gearboxes is a variety of different materials depending on customer requirements combined they are available with the continuous torque up to 160 Nm, and many ratios from 4:1 to 710.5:1. The output shaft is made of steel and supported by double bearing so it withstands high axial and radial loads. Ball bearings are used. For extreme loads special versions with welded shaft are also available. Our H (hybrid) planetary gearboxes are for especially quiet running, the planet gear of the first reduction are plastic and helical geared. t the PLG 60 are the planet gears of the 2nd stage also plastic and helical geared. Spirotec gearboxes (STG) are gearboxes with right-angled output. Core element of the series STG is the spiral wheelset. It enables to reliably transmit high moment with comparatively small centre distance in a small space. The gear is wear-free, because both gearing parts are made of hardened steel. Thus the gearing parts have an extremely high lifetime and the lubricant is free from contamination, which preserves the sealing rings of drive shaft and output shaft. The gearbox is designed in monobloc construction which provides particularly high meshing precision and a better drive system stiffness. The smooth running of the Spirotec gearbox approximates the level of worm gearboxes. Worm gearboxes (SG) are noted for their very quietrunning. The worm-gear shaft has bearings on both sides. The gear components, made of bronze or steel, and the lubrication ensure a long service life at the rated torque. In many applications, the right angle (outputshaft 90 to motor) is the optimum design solution. On request, wormgearboxes can be supplied with a hollow output shaft. Planetengetriebe (PLG) haben die höchsten zulässigen e aller Getriebe bei gleichzeitig sehr kompakter Bauform, geringem Gewicht und ausgezeichnetem. Bei unseren Planetengetrieben ist eine Vielzahl von verschiedensten Materialien je nach Kundenanforderungen kombinierbar, wobei e bis zu 160 Nm betragen und Untersetzungen von 4:1 bis 710,5:1 erhältlich sind. Die Getriebeabtriebswelle ist aus Stahl und mittels Gleit- oder Kugellager zweifach gelagert um hohe axiale und radiale Kräfte aufzunehmen. Sonderausführungen mit geschweißter Welle für extreme Belastungen sind ebenfalls erhältlich. Für besondere Laufruhe sind bei unseren H (Hybrid) Planetengetrieben die Planetenräder der 1. Stufe aus Kunststoff und schrägverzahnt. Beim PLG 60 sind die Planetenräder der 2. Stufe ebenfalls aus Kunststoff und schrägverzahnt. Spirotec Getriebe (STG) sind Getriebe mit rechtwinkligem btrieb. Das Herzstück der Baureihe STG ist der spiralverzahnte Radsatz. Dieser ermöglicht es mit vergleichsweise geringem chsabstand auf kleinem Bauraum hohe Momente zuverlässig zu übertragen. Da beide Verzahnungsteile aus gehärtetem Stahl gefertigt sind, läuft das Getriebe verschleißfrei. Dadurch haben nicht nur die Verzahnungsteile eine extrem hohe Lebensdauer sondern auch der Schmierstoff bleibt frei von Kontamination was wiederum die Dichtringe der ntriebs- und der btriebs-welle schont. Das Gehäuse ist in Monoblock-Bauweise ausgeführt was für eine besonders hohe Präzision des Zahneingriffes und für eine verbesserte Steifigkeit des ntriebssystems sorgt. Bestechend ist die hohe Laufruhe des Spirotec Getriebes die an das Niveau von Schneckengetrieben heranreicht. Schneckengetriebe (SG) zeichnen sich durch hohe Laufruhe aus. Die Schneckenradwelle ist beidseitig gelagert. Die Verzahnungsteile aus Bronze bzw. Stahl sowie eine Fettschmierung gewährleisten eine hohe Lebensdauer bei den angegebenen Nenndrehmomenten. Bei vielen nwendungen ist die um 90 gegenüber der welle abgewinkelte Getriebewelle von baulichen Gegebenheiten her optimal. uf nfrage sind Schneckengetriebe auch mit Hohlwelle lieferbar. The gearboxes are customized, e.g. for use in especially low ambient temperatures, or as high-power gearboxes with reinforced output shafts, or with special lubricants for very long service life. This will enable you to make an initial selection on the basis of speed and load ranges. On request, we will adapt a drive precisely to your operating conditions. Die Getriebe sind in zahlreichen Sonderausführungen lieferbar, z. B. für den Einsatz bei besonders niedrigen Umgebungstemperaturen oder als Hochleistungsgetriebe mit verstärkter usgangswelle und spezieller Schmierung für höchste Lebensdauer. Der Katalog gestattet eine Vorauswahl in Drehzahl und Lastbereichen. Eine exakte npassung des ntriebs an Ihre Betriebsbedingungen erfolgt auf nfrage. Visit for further product information/ Besuchen Sie für weitere Produktinformationen 39

2 PLG 24» High efficiency» Ring gear and planetary gears made of specific, high grade material» Planetary carriers and sun wheels made of steel» Output shaft with dual sleeve bearings» ll stages have straight toothing» Hoher» Hohlrad und Planetenräder aus speziellem Werkstoff (hochfester Kunststoff)» Planetenträger und Sonnenritzel aus Stahl» usgangswelle doppelt gleitgelagert» lle Getriebestufen geradverzahnt ausgeführt PLG 24 - Planet gears made of steel/ Planetenräder aus Stahl xial load/ radial load/ xiallast/ Radiallast Ncm kg N 5 / 12 5 / 12 5 / 12 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) PLG 24 Stages/ GR Gearbox without motor/ Getriebe ohne x ø M3, 5 Depth/Tiefe M2, 5 Depth/Tiefe Ø24 Ø4± x ±0.1 M2 (3x120 ) 17±0.1 M3 (3x120 ) L 2 17± Visit for further product information/ Besuchen Sie für weitere Produktinformationen

3 PLG 30 PLG 30 H» High efficiency» Ring gear and planetary gears made of specific, high grade material» Planetary carriers and sun wheels made of steel» Output shaft with dual sleeve bearings» ll stages have straight toothing» PLG 30 H have quiet operation due to helical gears in 1st stage» Hoher» Hohlrad und Planetenräder aus speziellem, hochwertigem Werkstoff» Planetenträger und Sonnenritzel aus Stahl» usgangswelle doppelt gleitgelagert» lle Getriebestufen geradverzahnt ausgeführt» Beim PLG 30 H ist die erste Getriebestufe für hohe Laufruhe schrägverzahnt ausgeführt PLG 30 - Ring gear made of steel/ Hohlrad aus Stahl xial load/ radial load/ xiallast/ Radiallast G 30.2 G G Ncm kg N 10 / / / 24 PLG 30 H - Low noise/ Hohe Laufruhe xial load/ radial load/ xiallast/ Radiallast Ncm kg N 10 / / / 24 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) PLG 30 PLG 30 H Stages/ G G G Gearbox without motor/ Getriebe ohne M3. 7 Depth/Tiefe 0.05 Ø Ø ± L 20±0.5 2 Visit for further product information/ Besuchen Sie für weitere Produktinformationen 41

4 PLG 32» Compact, industry compatible planetary gearbox» High efficiency» Ring gear, planetary carriers and sun wheels made of steel» Output shaft with double ball bearings» ll stages have straight toothing» Kompaktes, industrietaugliches Planetengetriebe» Hoher» Hohlrad, Planetenträger und Sonnenritzel aus Stahl» usgangswelle doppelt kugelgelagert» lle Getriebestufen gerade verzahnt ausgeführt PLG 32 - Ring gear made of steel/ Hohlrad aus Stahl xial load/ radial load/ xiallast/ Radiallast G 30.2 G G Ncm kg N 30 / / / 100 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) PLG 32 Stages/ G G G GR 42x GR 42x Gearbox without motor/ Getriebe ohne M 3 +1 Depth/Tiefe Ø Ø ± ± Visit for further product information/ Besuchen Sie für weitere Produktinformationen

5 PLG 32 H» Compact, industry compatible planetary gearbox» High efficiency» Ring gear, planetary carriers and sun wheels made of steel» Output shaft with double ball bearings» Helical gears in 1st stage (for quiet operation)» Kompaktes, industrietaugliches Planetengetriebe» Hoher» Hohlrad, Planetenträger und Sonnenritzel aus Stahl» usgangswelle doppelt kugelgelagert» Erste Getriebestufe schrägverzahnt ausgeführt (für hohe Laufruhe) PLG 32 H - Low noise/ Hohe Laufruhe xial load/ radial load/ xiallast/ Radiallast Ncm kg N 30 / / / 100 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) PLG 32 Stages/ G G G Gearbox without motor/ Getriebe ohne M 3 +1 Depth/Tiefe Ø Ø ± ±0.6 Visit for further product information/ Besuchen Sie für weitere Produktinformationen 43

6 PLG 42 K» High efficiency» Ring gear made of non-metallic high grade material» Output shaft with double ball bearings» ll stages have straight toothing» Hoher» Hohlrad aus speziellem Werkstoff (hochfester Kunststoff)» usgangswelle doppelt kugelgelagert» lle Getriebestufen geradverzahnt ausgeführt PLG 42 K - Ring gear made of plastic/ Hohlrad aus Kunststoff xial load/ radial load/ xiallast/ Radiallast G 30.2 G 30.1 G GR On request/ auf nfrage Ncm kg N 150 / / / 230 Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ G GR 42x GR 42x Gearbox without motor/ Getriebe ohne M 3 M 3 M 4 Woodruff key/ Scheibenfeder 2 x Ø Ø ± ± Visit for further product information/ Besuchen Sie für weitere Produktinformationen

7 PLG 42 S» Compact, industry compatible planetary gearbox» Ring gear, planetary carriers and sun wheels made of steel» Output shaft with dual ball bearings» ll stages have straight toothing» Kompaktes, industrietaugliches Planetengetriebe» Hohlrad, Planetenträger und Sonnenritzel aus Stahl» usgangswelle doppelt kugelgelagert» lle Getriebestufen geradverzahnt ausgeführt PLG 42 S - Ring gear made of steel/ Hohlrad aus Stahl xial load/ radial load/ xiallast/ Radiallast Ncm On request/ auf nfrage up to/ bis 70 (no metallic planet gears/ Kunststoff- Planetenräder) / 350 up to/ bis 600 up to/ bis 1400 kg N 150 / / / 250 Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ G GR 42x GR 42x Gearbox without motor/ Getriebe ohne M 3 M 3 M 4 Woodruff key/ Scheibenfeder 2 x Ø Ø ± ± Visit for further product information/ Besuchen Sie für weitere Produktinformationen 45

8 PLG 52» High efficiency» Ring gear, planetary carriers and sun wheels made of steel» Output shaft with double ball bearings» ll stages have straight toothing» Reinforced version on demand» Hoher» Hohlrad, Planetenträger und Sonnenritzel aus Stahl» usgangswelle doppelt kugelgelagert» lle Getriebestufen geradeverzahnt ausgeführt» Verstärkte usführung auf nfrage PLG 52 - Ring gear steel or plastic/ Hohlrad Stahl oder Kunststoff xial load/ radial load/ xiallast/ Radiallast Ncm up to/ bis 120 up to/ bis 800 up to/ bis 2400 kg N 500 / / / 350 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ GR 42x GR 42x GR 53x GR 53x GR 63x GR 63x GR 63Sx Gearbox without motor/ Getriebe ohne M5 7.5 Depth/Tiefe Scheibenfeder/ Woodruff key 4 x 6.5 DIN 6888 Series Nom Ø52 0 Ø ± B C 3 25 ± Ø Visit for further product information/ Besuchen Sie für weitere Produktinformationen

9 PLG 52 H - Low Noise» High efficiency» Quiet operation due to helical gears in 1st stage, 2nd and 3rd stage have straight toothing» Output shaft with dual ball bearings» Reinforced version on demand» Hoher» Für hohe Laufruhe ist erste Getriebestufe schrägverzahnt ausgeführt, 2. und 3. Getriebestufe geradeverzahnt» usgangswelle doppelt kugelgelagert» Verstärkte usführung auf nfrage PLG 52 H - Low noise/ Hohe Laufruhe xial load/ radial load/ xiallast/ Radiallast GR GR Ncm up to/ bis 120 up to/ bis 800 up to/ bis 2400 kg N 500 / / / 350 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ GR 42x GR 42x GR 53x GR 53x GR 63x GR 63x GR 63Sx Gearbox without motor/ Getriebe ohne M5 7.5 Depth/Tiefe Scheibenfeder/ Woodruff key 4 x 6.5 DIN 6888 Series Nom Ø52 0 Ø ± B C 3 25 ± Ø Visit for further product information/ Besuchen Sie für weitere Produktinformationen 47

10 PLG 60» Quiet operation due to non-metallic helical gears in 1st and 2nd stage» Sun wheels made of steel, ring gear made of aluminium» Output shaft with double ball bearings» Hohe Laufruhe durch schrägverzahnte erste und zweite Getriebestufe mit Planetenrädern aus speziellem Werkstoff (hochwertiger Kunststoff)» Planetenträger und Sonnenritzel aus Stahl, Hohlrad aus luminium» usgangswelle doppelt kugelgelagert PLG 60 - Low noise/ Hohe Laufruhe xial load/ radial load/ xiallast/ Radiallast On request/ auf nfrage GR GR 63 GR % Ncm up to/ bis 500 up to/ bis 2500 kg N 500 / / 350 Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ 1 2 GR 53x GR 53x GR 63x GR 63x GR 63Sx GR 80x GR 80x Gearbox without motor/ Getriebe ohne Parallel key/passfeder 5 x 5 x 20 DIN 6885 Ø 15 h5 Ø h7 52 ±0.1 M ± Visit for further product information/ Besuchen Sie für weitere Produktinformationen

11 PLG 63» Quiet operation due to helical gears in 1st stage, 2nd and 3rd stage have straight toothing» Single stage gearboxes, high grade material for quiet operation on request» Planetary carriers and sun wheels made of steel, ring gear made of nitrided steel» Output shaft with double ball bearings» Für hohe Laufruhe ist erste Getriebestufe schrägverzahnt ausgeführt, 2. und 3. Getriebestufe geradeverzahnt» Einstufige Getriebe mit Planetenrädern aus hochwertigem Kunststoff für besondere Laufruhe auf nfrage» Planetenträger und Sonnenritzel aus Stahl, Hohlrad aus nitriertem Stahl» usgangswelle doppelt kugelgelagert PLG 63 - Ring gear made of steel/ Hohlrad aus Stahl xial load/ radial load/ xiallast/ Radiallast Ncm up to/ bis 1500 (with metallic gears/ Stahl- Planetenräder) 500 (with none metallic gears/ Kunststoff- Planetenräder) kg up to/ bis 7000 up to/ bis N 800 / / / 800 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ GR 63x GR 63x GR 63S x GR 80x GR 80x Gearbox without motor/ Getriebe ohne Parallel Key/Passfeder 5x5x20 DIN B 0.06 Ø 15 h7 Ø63 Ø M5 10 deep/tief Ø 52± L 32±1 C B Visit for further product information/ Besuchen Sie für weitere Produktinformationen 49

12 PLG 75» Industry compatible high performance planetary gearbox» High efficiency» Quiet operation due to helical gears in 1st stage, 2nd and 3rd stage have straight toothing» Planetary carriers and sun wheels made of steel, ring gear made of nitrided steel» Output shaft with double ball bearings» Industrietaugliches, drehmomentstarkes Planetengetriebe» Hoher» Für hohe Laufruhe ist erste Getriebestufe schrägverzahnt ausgeführt, 2. und 3. Getriebestufe geradeverzahnt» Planetenträger und Sonnenritzel aus Stahl, Hohlrad aus nitriertem Stahl» usgangswelle doppelt kugelgelagert PLG 75 - Ring gear made of steel/ Hohlrad aus Stahl xial load/ radial load/ xiallast/ Radiallast % Ncm up to/ bis 2500 up to/ bis kg N 1000 / / 1000 xial load/ radial load/ xiallast/ Radiallast % 73 3 Ncm up to/ bis kg 3.7 N 1000 / 1000 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Stages/ GR 63x GR 63x GR 63Sx GR 80x GR 80x Gearbox without motor/ Getriebe ohne Parallel Key/Passfeder 6x6x28 DIN B Ø19 h Ø75±0.4 M6 16 deep/tief Ø Ø 65± L 3.5 B 49±1 B Centring/ Zentrierung M6 18 deep/tief 50 Visit for further product information/ Besuchen Sie für weitere Produktinformationen

13 PLG 95» 1-& 2-stage industry compatible planetary gearbox» Quiet operation due to helical gears in 1st stage, 2nd stage has straight toothing» High efficiency» Planetary carriers and sun wheels made of steel, ring gear made of nitrided steel» Output shaft with dual ball bearings» 1-& 2-stufiges industrietaugliches Planetengetriebe» Für hohe Laufruhe ist die 1. Stufe schrägverzahnt, die 2. Stufe geradverzahnt ausgeführt» Hoher» Planetenträger und Sonnenritzel aus Stahl, Hohlrad aus nitriertem Stahl» usgangswelle doppelt kugelgelagert PLG 95 - Ring gear made of steel/ Hohlrad aus Stahl Dauerdrehmonent cceleration torque/ Beschleunigungsmoment xial load/ radial load/ xiallast/ Radiallast On request/ auf nfrage Nm up to/ bis 40 up to/ bis 150 Nm up to/ bis 80 up to/ bis 300 kg ca. 3,4 ca. 5,5 N 1400 / / 1400 Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) PLG 95 Stages/ 1 2 GR 80x40/ x80 241,5 / 281,5 274,5 / 314,5 L Visit for further product information/ Besuchen Sie für weitere Produktinformationen 51

14 STG 65» Industrial-suited gearbox with right angle output» High quality and durable design» High output torque» Wide reduction range possible (5:1 up to 75:1)» Long working life (> h)» Industrietaugliches Getriebe mit rechtwinkligem btrieb» Hohe Qualität mit dauerfester uslegung» Hohes btriebsdrehmoment» Große Untersetzungsvielfalt möglich (5:1 bis zu 75:1)» Lange Lebensdauer (> h) STG 65 Dauerdrehmonent xial load/radial load/ xiallast/radiallast Nm up to/ bis 9 up to/ bis 9 up to/ bis 9 kg ca. 2,1 ca. 2,1 ca. 2,1 N 300 / / / 500 On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) STG 65 Stages/ 1 GR 63x25/ x / 280 L 52 Visit for further product information/ Besuchen Sie für weitere Produktinformationen

15 SG 45» Housing made of high-tensile zinc die-cast» Worm wheel made of brass» Standard output shaft with both sides ball bearings, shaft output to the left» Shaft output to the right or double shaft output on demand» Gehäuse aus hochfestem Zinkdruckguss» Schneckenrad aus Messing» Getriebe usgangswelle ist serienmäßig beidseitig kugelgelagert und einseitig links ausgeführt» Optional Wellenausgang rechts oder mit beidseitigem Wellenausgang SG 45 WL1 Standard version, shaft on left WL1 Standardausführung Welle links xial load/ radial load/ xiallast/ Radiallast % Ncm 75 kg 0.2 N 100 / 200 WL2 Special version, shaft on right WL3 Special version, shafts on both sides WL2 Sonderausführung Welle rechts WL3 Sonderausführung Welle beidseitig On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Standard mounting position/ Standard nbaulage GR 42x GR 42x GR 53x GR 53x ± xM3; 7 Depth/Tiefe 45 Ø Ø 8 g5 Ø x M3 4 tief ± ± xM3; 5 Depth/Tiefe Ø Visit for further product information/ Besuchen Sie für weitere Produktinformationen 53

16 SG 62» Housing made of high-tensile die-cast» Worm wheel made of brass» Standard output shaft with ball bearings on both sides, shaft output to the left» Shaft output to the right or double shaft output on demand» Gehäuse aus hochfestem Druckguss» Schneckenrad aus Messing» Getriebe usgangswelle ist serienmäßig beidseitig kugelgelagert und einseitig links ausgeführt» Optional Wellenausgang rechts oder mit beidseitigem Wellenausgang SG 62 xial load/ radial load/ xiallast/ Radiallast On request/ auf nfrage % Ncm up to/ bis 150 kg 0.3 N 150 / 200 (Ball bearings/ Kugellager) WL1 Standard version, shaft on left WL2 Special version, shaft on right WL3 Special version, shafts on both sides WL1 Standardausführung Welle links WL2 Sonderausführung Welle rechts WL3 Sonderausführung Welle beidseitig Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) GR 42x Standard mounting position/ Standard nbaulage GR 42x GR 53x GR 53x Visit for further product information/ Besuchen Sie für weitere Produktinformationen

17 SG 80 SG 80 H SG 80 K» Housing made of high-tensile zinc die-cast» Worm wheel made of brass» Standard output shaft with ball bearings on both sides, shaft output to the left» Shaft output to the right or double shaft output on demand» Gehäuse aus hochfestem Zinkdruckguss» Schneckenrad aus Messing» Getriebe usgangswelle ist serienmäßig beidseitig kugelgelagert und einseitig links ausgeführt» Optional Wellenausgang rechts oder mit beidseitigem Wellenausgang SG 80 SG 80 K SG 80 H Max. acceleration torque/ Max. Beschleunigungsmoment xial load/ radial load/ xiallast/ Radiallast SG 80 SG 80 H % SG 80 K % Ncm Ncm 800 up to/ bis 1000 (metallic gears/ Metall-Schneckenräder) up to/ bis 400 (plastic gears/ Kunststoff-Schneckenräder) kg 1 ± 10 % N 300 / 350 WL1 Standard version, shaft on left WL2 Special version, shaft on right WL3 Special version, shafts on both sides WL1 Standardausführung Welle links WL2 Sonderausführung Welle rechts WL3 Sonderausführung Welle beidseitig * 100 Ncm only possible if fixed on 50 mm bolt-hole circle/ * 1000 Ncm nur möglich, wenn an Teilkreis 50 mm angeschraubt On request/ auf nfrage Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) Standard mounting position/ Standard nbaulage GR 63x GR 63x GR 63Sx Ø 10 g M 5, 8 tief Ø ±0.1 (36) Ø Output shaft/ btriebswelle ± ±0.1 ± L M4,8 M5x4,8 Depth/ Tiefe 36 ± ±0.1 Depth/ Tiefe 35 3 D10 R0.2 optional SG 80 H Hollow shaft/ Hohlwelle Visit for further product information/ Besuchen Sie für weitere Produktinformationen 55

18 SG 120 SG 120 H SG 120 K» Housing made of high-tensile die-cast» Worm wheel made of brass» Standard output shaft with ball bearings on both sides, shaft output to the left» Shaft output to the right or double shaft output on demand» Version with worm gear (SG 120 K) available» Hollow shaft version (SG 120 H) available on demand» Combinations of SG 120 and planetary gear -box PLG 75 available on demand» Gehäuse aus hochfestem Druckguss» Schneckenrad aus Messing» Getriebe usgangswelle ist serienmäßig beidseitig kugelgelagert und einseitig links ausgeführt» Optional Wellenausgang rechts oder mit beidseitigem Wellenausgang» Variante mit Schneckenrad aus Kunststoff verfügbar (usführung SG 120 K)» Optional als Hohlwellenversion (usführung SG 120 H) verfügbar» Kombinationen aus SG 120 und Planetengetriebe PLG 75 auf nfrage erhältlich SG 120 SG 120 H SG 120 K xial load/ radial load/ xiallast/ Radiallast SG 120 SG 120 H % SG 120 K % Ncm kg 0.2 up to/ bis 1500 (S1 Operation/ Betrieb) (metallic gears/ Metall-Schneckenräder) up to/ bis 800 (S5 Operation/ Betrieb) (plastic gears/ Kunststoff-Schneckenräder) N 300 / 500 * 100 Ncm only possible if fixed on 50 mm bolt-hole circle/ * 1000 Ncm nur möglich, wenn an Teilkreis 50 mm angeschraubt On request/ auf nfrage WL1 Standard version, shaft on left WL2 Special version, shaft on right WL3 Special version, shafts on both sides WL1 Standardausführung Welle links WL2 Sonderausführung Welle rechts WL3 Sonderausführung Welle beidseitig Lengths L motor gearbox combination/ Länge L ntrieb (mm ± 2) GR 63x GR 63x GR 63Sx GR 80x Visit for further product information/ Besuchen Sie für weitere Produktinformationen

19 SG 120 SG 120 H SG 120 K Dimensions in mm SGF 120 B14/ Maßzeichnung in mm SGF 120 B14 Ø 14 h R optional SG 120 H Hollow shaft/ Hohlwelle Output shaft/ btriebswelle Zentr. D M4 DIN 332 WL 1 35 ±0.5 SGF 120 B14 + BG 75 SI 71 R ± Ø Ø L M 6 10 Depth/Tiefe 56 ± JSp R0.2 Dimensions in mm SGF 120 B5/ Maßzeichnung in mm SGF 120 B R Ø 14 h6 Ø 15 Ø 40 3 Zentr. D M4 DIN ± L 80 js7 100 ± ±0.5 M 6 Dimensions in mm SG 120/ Maßzeichnung in mm SG 120 ca ± ca L Ø 6.5 4X M 8 Taptide M 6 56 ± ± Visit for further product information/ Besuchen Sie für weitere Produktinformationen 57

% Ncm kg 0.14 / / / 0.24 N 30 / / / 100

% Ncm kg 0.14 / / / 0.24 N 30 / / / 100 Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com PLG 32 PLG 32 H» Compact, industry compatible planetary gearbox» High efficiency»

Mehr

SG 45. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

SG 45. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) SG 45» Housing made of high-tensile zinc die-cast» Standard output shaft with both sides ball bearings, shaft output to the left SG 45 Ø 18-0.04 Ø 8 g5 2 15 ±0.1 2 Ø 18-0.04» Gehäuse aus hochfestem Zinkdruckguss

Mehr

Worm Gearboxes SG Schneckengetriebe SG

Worm Gearboxes SG Schneckengetriebe SG Worm Gearboxes Schneckengetriebe Worm Gearboxes Schneckengetriebe The gearbox output shaft runs in selflubricating sintered bushes, as standard, there is a single output shaft on the left-hand side. Special

Mehr

PLG. Planetary Gearboxes PLG Planetengetriebe PLG NEW +++ NEU +++ NEW +++ NEW +++ NEU +++ NEW +++ NEU

PLG. Planetary Gearboxes PLG Planetengetriebe PLG NEW +++ NEU +++ NEW +++ NEW +++ NEU +++ NEW +++ NEU Planetary Gearboxes PG Planetengetriebe PG Planetary Gearboxes PG Planetengetriebe PG PG 2 PG 42 K The planet gears of all reduction stages are plastic. This gearbox is only available for projects. PG

Mehr

GR 53x58 24 VDC * 100 C max temp rise, ** Ratings apply at 20 C, ***continuous rated torque depends on heat dissipation from the motor

GR 53x58 24 VDC * 100 C max temp rise, ** Ratings apply at 20 C, ***continuous rated torque depends on heat dissipation from the motor AB6GR535 Versions of GR 53x5 / Ausführungen GR 53x5 With gearbox / Als Getriebemotor With brake / Als Bremsmotor With controller / it Regelelektronik With tacho generator / it Tachogenerator With magnetic

Mehr

ALN006BG65SI CONTROLLER INTEGRATED. Versions of BG 65 SI / Ausführungen BG 65 SI P./S. Page. Data

ALN006BG65SI CONTROLLER INTEGRATED. Versions of BG 65 SI / Ausführungen BG 65 SI P./S. Page. Data ALN6BG65SI Versions of BG 65 SI / Ausführungen BG 65 SI P./S. Page Controllers / Regelelektroniken - integral 4Q servo controller (BG65Sl) / 16 22 mit integrierter 4Q-Steuerungselektronik (BG65Sl) Housing

Mehr

KAG Worm Gears, DC Motors. Compatibie with motor. Compatible with motor S5 X M42 M48 N1L2 X S90 X M42 X X ,8-432

KAG Worm Gears, DC Motors. Compatibie with motor. Compatible with motor S5 X M42 M48 N1L2 X S90 X M42 X X ,8-432 GROUP ICU 13 SIX vn v A If' II-17 KAG Spur Gears, DC Motors KAG Worm Gears, DC Motors Spur Gearboxes This pages offers information on our spur gear boxes. The compatibility of this series without motor

Mehr

L ± 0,5. 0,65 +0,05 4 x M3. passend für Flachsteckerhülse 2,8x0,5 DIN 46247

L ± 0,5. 0,65 +0,05 4 x M3. passend für Flachsteckerhülse 2,8x0,5 DIN 46247 Ø 6 5,4 10 Ø 28 Stirnradgetriebe Typ S1/ mit Motor Baureihe M28 Spur Gearhead S1/ with motor type M28, 2-fach Geräuscharme Ausführung: 1. Zahnrad aus Kunststoff Sleeve bearings Low noise version: 1. gear

Mehr

Right of alteration without prior notice reserved

Right of alteration without prior notice reserved DC-Getriebemotor P26-M28x10 Planetengetriebe P26 mit M28x10 DC-Gearmotor P26-M28x10 Planetary Gearhead P26 with motor M28x10 Massbild Dimensions Änderungen vorbehalten Right of alteration without prior

Mehr

Edelstahlgetriebe stainless steel gearboxes

Edelstahlgetriebe stainless steel gearboxes Edelstahlgetriebe stainless steel gearboxes Technische Daten /technical data N e u! N e w! Das besondere Kegelradgetriebe the unique bevel gearbox 1 Spiralkegelgetriebe in Edelstahlausführung VA Spiral

Mehr

8,1. KEY DIN 6885 A Passfeder. Gear efficiency Getriebewirkungsgrad 42 9 LEADS mm LONG ,5 2 LEADS - 300mm LONG

8,1. KEY DIN 6885 A Passfeder. Gear efficiency Getriebewirkungsgrad 42 9 LEADS mm LONG ,5 2 LEADS - 300mm LONG Mix & Match DIRECTION OF ROTATION Drehrichtung 25,1±0,4 L 2 A 8,1 B M3 (4 ) 7 DEPTH/Tief 42 36 32 30 Planetary gearbox PM 42 25 h9 ( 0-0,052 ) 8 g6 ( -0,005-0,014 ) KEY DIN 6885 A-3 3 16 Passfeder M4 (4

Mehr

Stock Service. Gear Motor 31 x XX. Type / Baureihe XXX 410. Characteristics* Nenndaten* No load characteristics* Leerlaufdaten*

Stock Service. Gear Motor 31 x XX. Type / Baureihe XXX 410. Characteristics* Nenndaten* No load characteristics* Leerlaufdaten* Stock Service Gear Motor 3 x.6.77.4xx Type / Baureihe.6.77.XXX 4 Characteristics* Nenndaten* Rated voltage Nennspannung U/V V 2 Rated current Nennstrom I N A.4 Rated torque Nenndrehmoment T N /M N Ncm

Mehr

Planetary Screw Assembly

Planetary Screw Assembly 1 Planetary Screw Assembly (PLSA = Planetary Screw Assembly) Customer Presentation 1 Your Requirements Screw assemblies with high power density offered at market-oriented prices High load capacities, high

Mehr

Units HFUS-2UJ. Technische Daten. Technical Data. Abmessungen. Dimensions

Units HFUS-2UJ. Technische Daten. Technical Data. Abmessungen. Dimensions Units HFUS2UJ Technische Daten Technical Data Die HFUS2UJ Unit zeichnet sich neben dem leistungsfähigen KreuzrollenAbtriebslager insbesondere durch ihre Eingangswelle aus. Die in der Unit gelagerte Eingangswelle

Mehr

Zahnstangen geschliffen, gerade & schräg Racks Ground, Straight & Helical Seiten pages B 3 - B 6

Zahnstangen geschliffen, gerade & schräg Racks Ground, Straight & Helical Seiten pages B 3 - B 6 Zahnstangen Racks Lagerprogramm Stock Programme Inhalt Content Zahnstangen geschliffen, gerade & schräg, Verzahnungsqualität 5 - NEU Racks Ground, Straight & Helical, Toothing Quality 5 - NEW Seiten pages

Mehr

PLANETENGETRIEBE SPN-ECO (E2)

PLANETENGETRIEBE SPN-ECO (E2) www.spn-hopf.de PLANETENGETRIEBE SPN-ECO (E2) Planetary gearboxes SPN ECO (E2) Inhalt Content Planetengetriebe Planetary gearboxes SPN-Getriebe und Ritzel 3 SPN gearboxes and pinions SPN-ECO E2-Serie 4

Mehr

Zahnstangen vergütet, gerade & schräg Racks Quenched and Tempered, Straight & Helical

Zahnstangen vergütet, gerade & schräg Racks Quenched and Tempered, Straight & Helical Zahnstangen Racks Lagerprogramm Stock Programme Inhalt Content Zahnstangen geschliffen, gerade & schräg, Verzahnungsqualität 5 - NEU Racks Ground, Straight & Helical, Toothing Quality 5 - NEW Seiten pages

Mehr

Masterräder Master-Gears

Masterräder Master-Gears Masterräder Master-Gears usführungen type Stahl steel 1.7131 aufgekohlt carburized Verzahnung geschliffen ground teeth geradeverzahnt oder schrägverzahnt linkssteigend 19 31 42 straight teeth or helical,

Mehr

Gleichstrom-Permanentmagnetmotor DC-Permanent Magnet Motor Type GfmO 5,5 2 Pol Leistung/ power: W

Gleichstrom-Permanentmagnetmotor DC-Permanent Magnet Motor Type GfmO 5,5 2 Pol Leistung/ power: W Gleichstrom-Permanentmagnetmotor DC-Permanent Magnet Motor Type GfmO 5,5 2 Pol Leistung/ power: 10 125 W ESTAN Elektromaschinen und Steuerungsbau GmbH Burgunderstraße 6 D-79418 Schliengen (Germany) 1 Tel:

Mehr

Produktbeschreibung CSD-2A Product Description CSD-2A

Produktbeschreibung CSD-2A Product Description CSD-2A Produktbeschreibung Product Description Einbausätze Baureihe Die Harmonic Drive Einbausätze der Baureihe zeichnen sich durch eine im Vergleich zur HFUC-2A Baureihe um fast 50 % verringerte Baulänge aus.

Mehr

SWC SPANNLAGER UND GEHÄUSE SWC RADIAL INSERT BALL BEARINGS AND HOUSING

SWC SPANNLAGER UND GEHÄUSE SWC RADIAL INSERT BALL BEARINGS AND HOUSING SWC SPANNLAGER UND GEHÄUSE SWC RADIAL INSERT BALL BEARINGS AND HOUSING SWC bietet Gehäuseeinheiten bestehend aus einem Spannlager und wahlweise Stehgehäuse (UCP), Zweiloch-Flansch-Gehäuse (UCFL) oder Vierloch-Flansch-Gehäuse

Mehr

Motion Control Drives

Motion Control Drives Motion Control Drives EPG SERIES Servo Planetengetriebe Servo Planetary Gears 1 Übersicht Ausführungen/Design overview Getriebetyp/Gearbox Einbaulage/Mounting position Vollwelle mit Passfeder/ Solid shaft

Mehr

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H Rotary Dampers with high-torque range WRD-H 67 WRD-H 85 WRD-H 128 WRD-H 161 WRD-H 21 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Applications: - Mechanical and

Mehr

KAG Produkt-Konfigurator KAG Product-Configurator

KAG Produkt-Konfigurator KAG Product-Configurator KAG Produkt-Konfigurator KAG Product-Configurator Ihr Anspruch, unser Antrieb. Your requirements are our drive. Wir entwickeln und fertigen Gleichstromantriebe mit einer Dauerleistung von 2,5 bis 250 Watt,

Mehr

Manual Positioning Systems

Manual Positioning Systems M anue l l e Po si tio n iers y s t e me Manual Positioning Systems Linearversteller LT...4-4 linear translation stages LT Kreuztische MT...4-5 XY translation stages MT Hubtische HT...4-6 vertical translation

Mehr

Präzisions-Schnelllaufspindel Precision Hyper Spindle. Max. Ausnutzung der Maschinen- und Werkzeugpotentiale für Bohr- und Fräsarbeiten

Präzisions-Schnelllaufspindel Precision Hyper Spindle. Max. Ausnutzung der Maschinen- und Werkzeugpotentiale für Bohr- und Fräsarbeiten Präzisions-chnelllaufspindel Precision Hyper pindle Präzisions-chnelllaufspindel zur Erhöhung der Maschinendrehzahl.0.000 min- Max. Ausnutzung der Maschinen- und Werkzeugpotentiale für Bohr- und Fräsarbeiten

Mehr

B 1 - B 4 B 5 - B 6 B 7 - B 9 B 10 B 11 - B 13 B 14 B 15 & B 17 - B 18 B 16 B 19 B 20 - B 24 B 25 B 26 - B 27 B 28 - B 29 B 29

B 1 - B 4 B 5 - B 6 B 7 - B 9 B 10 B 11 - B 13 B 14 B 15 & B 17 - B 18 B 16 B 19 B 20 - B 24 B 25 B 26 - B 27 B 28 - B 29 B 29 Zahnstangen Racks Lagerprogramm stock programme Zahnstangen geschliffen, gerade & schräg Zahnstangen vergütet, gerade & schräg Zahnstangen induktiv gehärtet, gerade & schräg Zahnstangen rostfrei Zahnstangen

Mehr

Planetengetriebe SPN-RC4

Planetengetriebe SPN-RC4 www.spn-hopf.de Planetengetriebe SPN-RC4 Planetary gear boxes SPN-RC4 SPN-RC4 Konstruktive Merkmale Design features Fakten Geringes Laufgeräusch durch Schrägverzahnung Einfache Montage durch Tangentialklemmung

Mehr

Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series.

Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series. BEARINGS A L L FOR B E YOUR A R IFUTURE N G S 1 Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series Zen Ball Bearings are manufactured to the highest quality for standard

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Präzisionsführungswellen Precision Guide shafts

Präzisionsführungswellen Precision Guide shafts 75 Katalog 04 Linearlager und lineareinheiten Catalog 04 linear ball bushings and linear bearing housings 05 Präzisionsführungswellen Precision Guide shafts 75 Präsizionsführungswellen 05 Precision guide

Mehr

MECHANICAL WRENCH SERIES

MECHANICAL WRENCH SERIES MECANICAL WRENC SERIES MECANICAL WRENC SERIES The mechanical wrenches in the new Atlas Copco Saltus product line form the basis for manual tightening. They enable you to find the optimal solution for

Mehr

Distanzmontageteilen. Distance rolls

Distanzmontageteilen. Distance rolls Distanzmontageteile Distance rolls Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical

Mehr

Kettenradsatz Typ KS Simplex Sprocket Wheelset Type KS Simplex

Kettenradsatz Typ KS Simplex Sprocket Wheelset Type KS Simplex 8 Zubehör zu Universalspannern T ccessoires to Universal Tensioner T Kettenradsatz KS Simplex Sprocket Wheelset KS Simplex Ø Zähne Zahl No of teeth Ø Kette hain IN 8287 KS 3/8" x 7/32"-10 551 020 00 15

Mehr

Scroll down to view your document!

Scroll down to view your document! Over 100 years cumulative experience 24 hour rush turnaround / technical support service Established in 1993 The leading independent repairer of servo motors and drives in North America. Visit us on the

Mehr

TM Q71 EinE FragE der PErsPEktivE! TM Q71 a MattEr of PErsPEctivE!

TM Q71 EinE FragE der PErsPEktivE! TM Q71 a MattEr of PErsPEctivE! TM Q71 Eine Frage der Perspektive! TM Q71 A Matter of Perspective! TM Q71 ERSTAUNLICH anders! Führungssäule TM Q71 Die Führungssäule TM Q71 von Kesseböhmer Ergonomietechnik ist eine abgewandelte Form der

Mehr

/ Technische Änderungen und drucktechnische Irrtümer vorbehalten.

/ Technische Änderungen und drucktechnische Irrtümer vorbehalten. EZ-0225-V10 Air Bearing Spindle High accurancy air bearing spindle with direct drive. Equipped with an water-cooled synchronous motor (frequency at nominal speed 400 Hz), Power output 1880 W. Rotary encoder

Mehr

Dear Colleague, Please give us a call and let us know how we can assist you. We look forward to talking to you soon. Thank you.

Dear Colleague, Please give us a call and let us know how we can assist you. We look forward to talking to you soon. Thank you. Dear Colleague, Thank you for visiting our website and downloading a product catalog from the R.M. Hoffman Company. We hope this information will be useful to you in solving the application you are working

Mehr

Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA

Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA Lagerprogramm Stock Programme Inhalt Kettenradscheiben und Kettenräder - en von 6 mm bis 50,8

Mehr

Deceleration Technology. Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H

Deceleration Technology. Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H 6030 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:

Mehr

Hochfrequenz-Motoren und Generatoren Spindeln und Vorsatzspindeln Baureihen T1 73 Type~RFM-~.RSM-~KM-.. Hochfrequenz Motorspindeln - Fräsen

Hochfrequenz-Motoren und Generatoren Spindeln und Vorsatzspindeln Baureihen T1 73 Type~RFM-~.RSM-~KM-.. Hochfrequenz Motorspindeln - Fräsen Kemmerich Elektromotoren GmbH & Co.KG www.elektromotoren.de Baureihen T1 73 Type~RFM-~.RSM-~KM-.. Hochfrequenz Motorspindeln - Fräsen Milling Die wassergekühlten Frässpindeln mit ihrem manuellen oder automatischen

Mehr

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H 12070 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:

Mehr

www.spn-hopf.de ZAHNSTANGEN TOOTH-RACKS

www.spn-hopf.de ZAHNSTANGEN TOOTH-RACKS www.spn-hopf.de ZAHNSTANGEN TOOTH-RACKS Inhalt Content SPN-Zahnstangen Info 3 SPN-tooth racks info SPN-Zahnstangen TYP Z113 4 SPN-tooth racks Type Z113 SPN-Zahnstangen TYP Z013 5 SPN-tooth racks Type Z013

Mehr

Feststell-Rollen kg

Feststell-Rollen kg R 74 Feststell-Rollen 40 800 kg Höhenverstellbare und rollbare Maschinen-Stützfüße! FSR/600/1 FSR/600/3 FSR/RF/600/3 Maschinen-Transportfahrzeuge und Hebegeräte finden Sie ab der Katalog-Seite T 32. Räder:

Mehr

Q-Motor Multifunktionsmotor. Q-motor multi-function motor

Q-Motor Multifunktionsmotor. Q-motor multi-function motor Multifunktionsmotor multi-function motor Leistungsdaten Performance data Spannung voltage Frequenz frequency Drehzahl speed Leistungsabgabe power output Leistungsaufnahme power input Stromaufnahme current

Mehr

Produktbeschreibung HFUC-2A Product Description HFUC-2A

Produktbeschreibung HFUC-2A Product Description HFUC-2A Produktbeschreibung Product Description Einbausätze Baureihe Die Getriebeeinbausätze sind ein Ergebnis der konsequenten Weiterentwicklung der Harmonic Drive Präzisionsgetriebe. Gegenüber Standardgetrieben

Mehr

2011 European HyperWorks Technology Conference

2011 European HyperWorks Technology Conference 2011 European HyperWorks Technology Conference Topology Optimization Methods applied to Automotive Transmission Housings 1 Agenda Introduction - Corporate Information - overview Topology Optimization for

Mehr

Baureihe Series PKA/PKB

Baureihe Series PKA/PKB Spielfreie Metallbalgkupplungen Backlash-free Metal Bellow Couplings Baureihe Series PKA/PKB DE EN 09 2011 Partner for performance www.gerwah.com Spielfreie Metallbalgkupplung Backlash-free Metal Bellow

Mehr

Auszug aus der netzbetriebenen Multimotor-Serie

Auszug aus der netzbetriebenen Multimotor-Serie Drehantrieb MU 010 Max. zentrische Belastung 1 kg bei 1 bis 5 UpM. Je größer das Objekt und je schneller der Motor desto geringer die mögliche Belastung. Rotating Motor MU 010 Max. centric load 1 kg /

Mehr

drawbar eye series 2010

drawbar eye series 2010 drawbar eye series 2010 directive 94/20/EG / class S DIN 74054-40A / material St52-3 (no. 1.0570) / with bush 40 mm parameters for centre-axle trailer s ṣhaft cross section order no H x B mm length A mm

Mehr

11Winkel + Flansche. Angles + flanges. Winkel + Flansche/Angles + flanges 401

11Winkel + Flansche. Angles + flanges. Winkel + Flansche/Angles + flanges 401 11Winkel + Flansche Angles + flanges Winkel + Flansche/Angles + flanges 401 Sicher um die Ecke Turning the corner safely 1 2 Flanschseite mit O-Ring Flange view with o-ring UNI Kabelverschraubungswinkel

Mehr

G 1 G 2 - G 8 G 9 - G 10

G 1 G 2 - G 8 G 9 - G 10 Lagerprogra stock prograe Kegelräder - Verzahnungsgeometrie Kegelräder Kegelräder Acetalharz gespritzt G 1 G 2 - G 8 G 9 - G 10 - Toothing Geometrie Moulded Sonderanfertigungen Auf Anfrage Bogenverzahnte

Mehr

PIA mini LED. PIA mini LED

PIA mini LED. PIA mini LED PIA mini LED PIA mini LED Die gelungene Inszenierung von Licht und Raum gibt Ihren Shops und Stores das einzigartige Ambiente, das Kaufen zur schönsten Nebenbeschäftigung der Welt macht. Unser neues Produktprogramm

Mehr

Op trek en druk belastbaar. Bronzen slinger aslagering, tandheugelvoering uit hoog- waardige kunststof.

Op trek en druk belastbaar. Bronzen slinger aslagering, tandheugelvoering uit hoog- waardige kunststof. HZW 45 1000 N Version ZW Gefrästes, selbsthemmendes Schneckengetriebe. Spezialgehäuse. Getriebe und Zahnstange aus Stahl, Verschleißteile gehärtet. Robuste Präzisionsausführung. Auf Zug und Druck belastbar.

Mehr

Technische Daten / Technical data

Technische Daten / Technical data RENTAL INDOOR Die Rental-Lösungen von LEDium sind voll Road-tauglich. Dies bedeutet im Detail ein schnelles Auf- und Abbauen sowie eine hohe Widerstandsfähigkeit. Bei den indoor Varianten kommt ein sehr

Mehr

Attenuator and Distribution System Zehnder ComfoWell 220

Attenuator and Distribution System Zehnder ComfoWell 220 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for

Mehr

Schwerlast-Linear-Systeme Heavy load-linear-systems Linearachsen Linear axis

Schwerlast-Linear-Systeme Heavy load-linear-systems Linearachsen Linear axis Schwerlast-Linear-Systeme Heavy load-linear-systems Linearachsen Linear axis WINKEL RLE-Roboter-Achsen Stahlprofilbauweise mit Kugelumlaufführungen High Dynamic, High Precision-Ausführung mit Servomotoren

Mehr

Stahlgitterwiderstandselemente. Steel Grid Resistor Elements RSW 1 RSW 54. RSW 1 to RSW W für Einbau. 500 W for fitting

Stahlgitterwiderstandselemente. Steel Grid Resistor Elements RSW 1 RSW 54. RSW 1 to RSW W für Einbau. 500 W for fitting Stahlgitterwiderstandselemente Steel Grid Resistor lements 500 W für inbau 500 W for fitting Stahlgitterwiderstandselemente RSW RSW 54 500 W für inbau Steel Grid Resistor lements RSW to RSW 54 500 W for

Mehr

Induktive Näherungsschalter inductive proximity switches

Induktive Näherungsschalter inductive proximity switches Zylindrisch DC cylindric DC Zylindrisch DC Vollmetall cylindric DC full metal Hochtemperatur high temperature Schweißfest weld resistant Druckfest pressure resistant Analog analog Namur namur AC AC Kunststoff

Mehr

TT Single ram under body hoists / TT Dreiseitenkippzylinder

TT Single ram under body hoists / TT Dreiseitenkippzylinder Single ram under body hoists / Dreiseitenkippzylinder SINGLE RAM UNDER BODY GEAR Effective dimensions Wipro s single ram under body model is suitable for 3-way, as well as rear-end tipping. Its cleverly

Mehr

LORENZ MESSTECHNIK GmbH

LORENZ MESSTECHNIK GmbH LORNZ MSSTHNIK GmbH Drehmomentsensor, reaktiv Torque Sensor, reactive Nenndrehmoment von 0,005 N m... 20000 N m Genauigkeitsklasse optional 0,05% v. ndwert Sensoren mit Nenndrehmoment bis 0,02 N m mit

Mehr

Bosch Rexroth - The Drive & Control Company

Bosch Rexroth - The Drive & Control Company Bosch Rexroth - The Drive & Control Company Alle Rechte bei Bosch Rexroth AG, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns. 1 Case study

Mehr

Maße abhängig von der Ausführung. Siehe angegebene Seiten. / Dimensions depend on version. See refered pages. 1)

Maße abhängig von der Ausführung. Siehe angegebene Seiten. / Dimensions depend on version. See refered pages. 1) EH 2 mit rotierender Trapezgewindespindel EH 2 with rotating trapezoidal-thread spindle Einstufige Getriebe One-stage gear units Zweistufige Getriebe Two-stage gear units X) Maße abhängig von der Ausführung.

Mehr

Dach-Filterlüfter und Entlüftung Roof Filter Fan and Exhaust Filter DVL / DVE

Dach-Filterlüfter und Entlüftung Roof Filter Fan and Exhaust Filter DVL / DVE Dach-Filterlüfter und Entlüftung Roof Filter Fan and Exhaust Filter DVL / DVE 4-8 Optimale Luftführung im Schaltschrank Montage und Filterwechsel ohne Werkzeug Gleiche e wie Filterlüfter LV Geringe Einbautiefe

Mehr

3,0kW - 29rpm - 48,86 - KR373. 00. 100L/4b - L02

3,0kW - 29rpm - 48,86 - KR373. 00. 100L/4b - L02 K Serisi Tip Tanımlaması K Serie Unit Designations K Serien Typenbezeichnung 3,0kW - 29rpm - 48,86 - KR373. 00. 100L/4b - L02 Güç (kw) Power (kw) Leistung (kw) Çıkış Devri(d/d) Redüksiyon (i) Output Speed(rpm)

Mehr

SCHLAUE LÖSUNGEN FÜR IHRE ANWENDUNGEN SMART SOLUTIONS FOR YOUR APPLICATIONS

SCHLAUE LÖSUNGEN FÜR IHRE ANWENDUNGEN SMART SOLUTIONS FOR YOUR APPLICATIONS SCHLAUE LÖSUNGEN FÜR IHRE ANWENDUNGEN SMART SOLUTIONS FOR YOUR APPLICATIONS block.eu Schlau: Mit der FLUID-TECHNOLOGY schaffen Sie 50% mehr Platz im Schrank. Smart: With the FLUID-TECHNOLOGY you create

Mehr

prismenlaufschienen prismatic guide rails

prismenlaufschienen prismatic guide rails 69 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 08 prismenlaufschienen prismatic guide rails > unser fertigungsprogramm // parallelitätsdiagramm // Bohrbeispiele // Abstreifer für prismenlaufschienen

Mehr

Baureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator

Baureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl

Mehr

KRUPP Drehantriebe / rotary drives

KRUPP Drehantriebe / rotary drives KRUPP Drehantriebe / rotary drives Ein Unternehmen von ThyssenKrupp Services ThyssenKrupp GfT Tiefbautechnik TK Systembeschreibung KRUPP Drehantriebe basieren auf Jahrzehntelanger Erfahrung in der Entwicklung

Mehr

IMM. Eintauchpumpen mit offenem Laufrad Immersion pumps with open impeller. Leistungsdaten / Performance. n 2850 1/min

IMM. Eintauchpumpen mit offenem Laufrad Immersion pumps with open impeller. Leistungsdaten / Performance. n 2850 1/min Werkstoffe / Materials Teile-Benennung / Description Pumpengehäuse Pump casing Laufrad Impeller Rotorwelle Shaft Deckel Cover Spritzring Deflector IMM 40-50 IMM 63-100 Aluminium / Stahl / GG Aluminium

Mehr

ENTKOPPEL-ELEMENTE UND MONTAGETECHNIK FLEXIBLE PIPES AND MOUNTING COMPONENTS

ENTKOPPEL-ELEMENTE UND MONTAGETECHNIK FLEXIBLE PIPES AND MOUNTING COMPONENTS ABGASTECHNIK I AFTERMARKET EXHAUST TECHNOLOGY I AFTERMARKET ENTKOPPEL-ELEMENTE UND MONTAGETECHNIK AND MOUNTING COMPONENTS WWW.EBERSPAECHER.COM ENTKOPPEL-ELEMENTE QUALITÄT VOM ERSTAUSRÜSTER: PASSGENAU,

Mehr

Werkzeugwagen VAS Tool trolley VAS

Werkzeugwagen VAS Tool trolley VAS Flexibel einsetzbar Bedarfsgerecht zu konfigurieren Hochwertige Qualität Can be used flexibly Can be configured according to requirements High level of quality Werkzeugwagen VAS 276 001 Tool trolley VAS

Mehr

Linn-Pumpen GmbH. Gewerbering 15 D Schalksmühle Telefon: +49 (0) Telefax: +49 (0)

Linn-Pumpen GmbH. Gewerbering 15 D Schalksmühle Telefon: +49 (0) Telefax: +49 (0) inn-n GmbH GS Unterwassermotorpumpen für 4" - Tiefbrunnen GS Submersible s for 4 Wells Anwendungsbereiche - Wasserversorgungsanlagen - Beregnungsanlagen - Druckerhöhungsanlagen - Feuerlöschanlagen Technische

Mehr

MOTORENKATALOG motor catalogue

MOTORENKATALOG motor catalogue MOTORENKATALOG motor catalogue 1 TYPENSCHLÜSSEL (BESTELLBEISPIEL) type code (example for ordering) ROSYNC ROBASE 36 2 G ROSLYDE MOTORSERIE motor series MOTORTYP motor type SPANNUNG voltage GETRIEBETYP

Mehr

European BS Standard DIN 8187, Teil 1 ISO

European BS Standard DIN 8187, Teil 1 ISO 2 3 European BS Standard DIN 8187, Teil 1 ISO 606-2004 chain pitch min. max. max. plate plate max. max. max. trans- ISO 606 weight inside roller plate thickness thickness pin pin connect verse tensile

Mehr

Including a running-in certificate!

Including a running-in certificate! High-Line W Der perfekte Flachabtrieb ohne Kompromisse. Die High-Line W - Flachabtriebe erreichen nach dem heutigen Stand der Technik das Höchstmaß an Genauigkeit. Auf Grund der äußeren Abmessungen, vornehmlich

Mehr

Wartungsfreie Schleifringübertrager Maintenance Free Slip Ring Transmitters. A Division of The Morgan Crucible Company plc

Wartungsfreie Schleifringübertrager Maintenance Free Slip Ring Transmitters. A Division of The Morgan Crucible Company plc Wartungsfreie Schleifringübertrager Maintenance Free Slip Ring Transmitters A Division of The Morgan Crucible Company plc Schleifringübertrager für Windkraftanlagen im weltweiten Einsatz Slip ring transmitter

Mehr

TKreiselpumpen Typ T. Centrifugal pumps type T

TKreiselpumpen Typ T. Centrifugal pumps type T TKreiselpumpen Typ T Centrifugal pumps type T Eigenschaften. Properties.. Sehr hoher Wirkungsgrad durch strömungstechnisch günstig geformtes Laufrad Very high efficiency because of flow favorable formed

Mehr

SG 20. Stirnradgetriebe. Spurwheel Gearboxes. Réducteurs à trains paralleles. Abtriebswelle in Gleitlagerung. Sleeve Bearing

SG 20. Stirnradgetriebe. Spurwheel Gearboxes. Réducteurs à trains paralleles. Abtriebswelle in Gleitlagerung. Sleeve Bearing Stirnradgetriebe Abtriebswelle in Gleitlagerung Spurwheel Gearboxes Sleeve Bearing Réducteurs à trains paralleles Arbre de sortie roulement lisse SG 20 Stirnradgetriebe Abtriebswelle Kugelgelagert Spurwheel

Mehr

Technische Daten 3M15M012P1 3M15M024P1 [12 Volt] [24 Volt]

Technische Daten 3M15M012P1 3M15M024P1 [12 Volt] [24 Volt] Stirnradgetriebe mit Gleichstrom-Motor Typ 3M15M _ P1 Gleichstrom-Motor 12 bzw. 24 Volt Technische Daten Technische Daten 3M15M012P1 3M15M024P1 [12 Volt] [24 Volt] Gleichspannung V 12,00 24,00 Drehzahl,

Mehr

TKreiselpumpen. Centrifugal Pumps

TKreiselpumpen. Centrifugal Pumps TKreiselpumpen Centrifugal Pumps Die KNOLL-Kreiselpumpe steht für viele Vorteile. The KNOLL centrifugal pump type T has many advantages.. Hohe Belastbarkeit aufgrund solider Wellen- Nabenverbindung High

Mehr

Werkzeugwagen VAS Tool trolley VAS

Werkzeugwagen VAS Tool trolley VAS Flexibel einsetzbar Bedarfsgerecht zu konfigurieren Hochwertige Qualität Can be used flexibly Can be configured according to requirements High level of quality Werkzeugwagen VAS 276 001 Tool trolley VAS

Mehr

Inquiry/-Purchase order form for commercial vehicle

Inquiry/-Purchase order form for commercial vehicle Inquiry/-Purchase order form for coercial vehicle We kindly ask you to fill in the data as complete as possible. This will enable us to select carefully the required product and to deliver at short notice.

Mehr

Komponenten-Systeme Components systems WINKEL-Rollen WINKEL Bearings. WINKEL-Rolle Axialrolle fest. WINKEL Bearing axial bearing fixed

Komponenten-Systeme Components systems WINKEL-Rollen WINKEL Bearings. WINKEL-Rolle Axialrolle fest. WINKEL Bearing axial bearing fixed Komponenten-ysteme omponents systems WINKL-Rollen WINKL earings WINKL-Rolle xialrolle fest Nacscmierbarkeit für Rollen.0 -.06 WINKL earing axial bearing fixed Relubrication only for types.0 -.06 bb. exemplarisc

Mehr

K None/Ohne B With/Mit

K None/Ohne B With/Mit AC Servo Motoren mit Getriebelösung AC Servo Motors with Gearsolution 991110 11/ 2006 A C D Series Serie STD Compact Dynamic Standards Norm C CE U UL Frame Baugröße 2, 3, 4, 5, 6, 7, 8 IP 64 65 Stall torque

Mehr

Angebotsaufforderung. Ausschreibungstexte Lehnen Funktion T

Angebotsaufforderung. Ausschreibungstexte Lehnen Funktion T Angebotsaufforderung Funktion T300 03.08.2012 Auftraggeber: Lehnen GmbH Seite: 2 von 8 *** Hinweistext Bathroom series T-300 07. Products with load-bearing capacity till max. 300 kg 07..001. 1,000 Stk......

Mehr

Innenleuchten II. S 2 Seite 3. S Seite 7. S 22 Seite 3. S Seite 7. S 132 Seite 8. S 21 Seite 4. S 23 Seite 4. S 100 Seite 5.

Innenleuchten II. S 2 Seite 3. S Seite 7. S 22 Seite 3. S Seite 7. S 132 Seite 8. S 21 Seite 4. S 23 Seite 4. S 100 Seite 5. Mit Innenleuchten für die Montage an, sowie in n und Wänden kann die Beleuchtung von Innenräumen zielgerichtet und individuell gestaltet und optimiert werden. Diese sind geeignet sowohl für öffentliche

Mehr

Lagerprogramm. stock programme. made to order. Sonderanfertigungen. Unsere Fertigungsmöglichkeiten: our manufacture possibilities: Stirnräder

Lagerprogramm. stock programme. made to order. Sonderanfertigungen. Unsere Fertigungsmöglichkeiten: our manufacture possibilities: Stirnräder Stirnräder Spur Gears Lagerprogramm stock programme Spielfreies Stirnradsystem - NEU - Technische Grunddaten Spielfreies Stirnradsystem geschliffen gerade & schräg Masterräder - Technische Grunddaten &

Mehr

OPTOELEKTRONIK Vertriebs GmbH

OPTOELEKTRONIK Vertriebs GmbH OPTOELEKTRONIK Vertriebs GmbH Katalog / Catalogue LWL-Weitverkehrsumsetzer / Long distance FO converters Dezember 2003 2003 OPTOELEKTRONIK Vertriebs GmbH. Alle Rechte vorbehalten. Die Vervielfältigung

Mehr

Type P, S & RSP - Ball bearing, bellows system cartridge Series 9000

Type P, S & RSP - Ball bearing, bellows system cartridge Series 9000 Type P, S & RSP - Ball bearing, bellows system cartridge Recommended medium Heat transfer oil, Air, Steam, Water, Non-toxic industrial gases, Lyes (on request) Available sizes 1/4" - 4" Max. speed ISO

Mehr

Auszug aus LED-Katalog 2014 Extract from the LED catalogue 2014 AIR MAXX LED. Wandleuchten / Wall luminaires

Auszug aus LED-Katalog 2014 Extract from the LED catalogue 2014 AIR MAXX LED. Wandleuchten / Wall luminaires uszug aus LED-Katalog 2014 Extract from the LED catalogue 2014 IR MXX LED Wandleuchten / Wall luminaires 362 363 382 IR MXX LED 250 POWER IR MXX LED 378 IR MXX LED 130 POWER 384 IR MXX LED 250 POWER 374

Mehr

Motorenreihe Einphasen Wechselstrom

Motorenreihe Einphasen Wechselstrom Einphasen Wechselstrommotorensingle phase motors enreihe Einphasen Wechselstrom line single-phase Eckdaten Key data n s Gehäusematerial Frame material Number of poles Leistung Output 63 bis 100 63 to 100

Mehr

Zehnder ComfoWell 220

Zehnder ComfoWell 220 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for

Mehr

Rückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated

Rückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated Rückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated Betriebsdruck bis 320 bar Working pressure up to 320 bar Nenndurchfluss bis 200 l/min Nominal flow

Mehr

Nachschmiersysteme für Kombirollen Lubrication systems for combined bearings (Seite/page 130)

Nachschmiersysteme für Kombirollen Lubrication systems for combined bearings (Seite/page 130) Heavy Duty Kombirolle 3.054-3.063 Vorteile: Schmutz unempfindliche Kombirolle für Heavy Duty Einsätze im Bereich Baustoffindustrie, Gieserei, Untertage Radiallager stirnseitig nachschmierbar Axiallager

Mehr

Hypex d.o.o. Alpska cesta 43, 4248 Lesce Slovenija Tel: +386 (0) Fax: +386 (0)

Hypex d.o.o. Alpska cesta 43, 4248 Lesce Slovenija Tel: +386 (0) Fax: +386 (0) MAINTENANCE INSTRUCTIONS MTJ MRJ SERIES Hypex d.o.o. Alpska cesta, Lesce Slovenija Tel: + (0) 00 Fax: + (0) 0 www.unimotion.eu email: sales@unimotion.eu www.unimotion.eu MTJ MRJ Series OVERVIEW Used symbols

Mehr

TKreiselpumpen Typ T. Centrifugal pumps type T

TKreiselpumpen Typ T. Centrifugal pumps type T TKreiselpumpen Typ T Centrifugal pumps type T Eigenschaften. Properties.. Sehr hoher Wirkungsgrad durch strömungstechnisch günstig geformtes Laufrad Very high efficiency because of flow favorable formed

Mehr