COMBO TAPS COMBO GEWINDEBOHRER HSS. - Spiral Point, Spiral Flute Type Multi Purpose tapping, YG-1's Patent. Being the best through innovation

Größe: px
Ab Seite anzeigen:

Download "COMBO TAPS COMBO GEWINDEBOHRER HSS. - Spiral Point, Spiral Flute Type Multi Purpose tapping, YG-1's Patent. Being the best through innovation"

Transkript

1 Being the best through innovation COBO COBO GEWINDEBOHRER Spiral oint, Spiral Flute Type ulti urpose tapping, YG's atent gerade und drallgenutet ehrzweckgewindebohrer. YG atent

2 SELECTION GUIDE COBO (Spiral oint & Spiral Flute) ulti urpose tapping, YG's atent COBO ED No. ODEL Tool aterial Standard Work aterial OINT TA Dimensions Tolerance Chamfer FLUTE TA Surface Treatment AGE TC U / ISO H B TC F U ISO H B TC UNC U / B B 0 TC UNF U / B B TC0 U / ISO H C TC F U ISO H C TC UNC U / B C TC UNF U / B C phone:+0, fax:+, yg@yg.kr

3 COBO TC SERIES ISO etric coarse threads etrisches ISOGewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. COBO OINT FLUTE D / H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC0 TC TC0 TC TC TC TC ØD (~0) and (~0) Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. Unit : N/mm < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

4 COBO TC SERIES COBO OINT F ISO etric fine threads etrisches ISOFeingewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. FLUTE FLUTE FORING D H D 0 B 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC ØD Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

5 COBO TC SERIES F ISO etric fine threads etrisches ISOFeingewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. COBO OINT FLUTE D H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING ØD 0 0 itch ED No. TC TC TC TC TC TC TC TC TC TC0 TC TC TC TC TC TC ØD..... Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød... NUT STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

6 COBO TC SERIES COBO OINT FLUTE UNC Unified coarse threads Unified Grobgewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. FLUTE FORING D / B D 0 B 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD TI # 0 UNC # 0 UNC # UNC # UNC #0 UNC # UNC /" UNC /" UNC /" UNC /" UNC /" UNC /" UNC /" UNC /" 0 UNC /" UNC " UNC ED No. TC TC TC TC TC TC TC0 TC TC TC TC TC0 TC TC0 TC TC ØD (#~/") and (/"~") Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% 0 phone:+0, fax:+, yg@yg.kr FR

7 COBO TC SERIES UNF Unified fine threads Unified Feingewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. COBO OINT FLUTE D / B D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING ØD TI # UNF # UNF # 0UNF # UNF #0 UNF # UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF " UNF ED No. TC TC TC TC0 TC TC TC TC TC0 TC TC TC TC TC TC TC ØD (#~/") and (/"~") Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød NUT STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

8 COBO TC0 SERIES COBO OINT FLUTE ISO etric coarse threads etrisches ISOGewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. FLUTE FORING D / H D 0 C R0 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC0 TC00 TC0 TC00 TC0 TC00 TC0 TC0 TC0 TC0 phone:+0, fax:+, yg@yg.kr ØD (~0) and (~0) Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR

9 COBO TC SERIES F ISO etric fine threads etrisches ISOFeingewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. COBO OINT FLUTE D H D 0 C R0 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC ØD Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød NUT STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

10 COBO TC SERIES COBO OINT F ISO etric fine threads etrisches ISOFeingewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. FLUTE FLUTE FORING D H D 0 C R0 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD 0 0 itch ED No. TC TC TC TC TC TC TC TC TC TC0 TC TC TC TC TC TC ØD..... Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød... Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

11 COBO TC SERIES UNC Unified coarse threads Unified Grobgewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. COBO OINT FLUTE D / B D 0 C R0 0 achine taps aschinengewindebohrer FLUTE FORING ØD TI # 0 UNC # 0 UNC # UNC # UNC #0 UNC # UNC /" UNC /" UNC /" UNC /" UNC /" UNC /" UNC /" UNC /" 0 UNC /" UNC " UNC ED No. TC TC TC TC TC TC TC0 TC TC TC TC TC0 TC TC0 TC TC ØD (#~/") and (/"~") Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød NUT STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

12 COBO TC SERIES COBO OINT UNF Unified fine threads Unified Feingewinde For using multipurpose, and correct thread profiles & long tool life due to special tap geometry. YG company has a patent. Für vielfältigen Einsatz, genaue Gewindeprofile und lange Standzeitendank einer besonderen Schneidengeometrie. Von YG patentiert. FLUTE FLUTE FORING D / B D 0 C R0 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD TI # UNF # UNF # 0UNF # UNF #0 UNF # UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF /" UNF " UNF ED No. TC TC TC TC0 TC TC TC TC TC0 TC TC TC TC TC TC TC ØD (#~/") and (/"~") Coating(TiN, TiCN or TiN) or Surface Treatment(Steam Homo) is available on your request. d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

13 Being the best through innovation OINT GEWINDEBOHRER IT SCHALANSCHNITT Tapping Through Holes, & HSS Für Durchgangslöcher. und HSS

14 SELECTION GUIDE OINT Tapping Through Holes, & HSS OINT ED No. ODEL Tool aterial Standard Work aterial Dimensions Tolerance Chamfer Surface Treatment AGE TC GS ISO /H B 0 TC GS ISO /H B TC GS ISO /H B TD GS ISO /H B TiN TD GS ISO /H B TiN TQ HSS VG / ISO /H B vap TR HSS VG / ISO /H B TC VG / ISO /H B TE VG / ISO /H B NI TD VG / ISO /H B TiN TY VG / ISO /H B TiN TQ HSS VA / ISO /H B vap TR HSS VA / ISO /H B TC HR / ISO /H B TY HR / ISO /H B TiN TB VA NW / ISO X/HX B vap TCH VA NW / ISO X/HX B Hardslick T HSS Az Ti / ISO /H B TZ HSS Az Ti / ISO /H B TiN TQ HSS Ti / ISO /H B vap phone:+0, fax:+, yg@yg.kr

15 ACHINE OINT ED No. ODEL Tool aterial Standard Work aterial Dimensions Tolerance Chamfer Surface Treatment AGE TR HSS Ti / ISO /H B 0 T HSS / ISO /H B TZ HSS / ISO /H B TiN TE / ISO /H B NI TC Az / ISO /H B TC F GS ISO /H B TD F GS ISO /H B TiN TC F VG ISO /H B TD F VG ISO /H B TiN 0 TB F VA NW ISO X/HX B vap TC UNC GS / B B TC UNC VG / B B TD UNC VG / B B TiN TB UNC VA NW / B B vap TC UNF GS / B B TC UNF VG / B B TB UNF VA NW / B B vap TC BSW GS / B phone:+0, fax:+, yg@yg.kr

16 OINT TC SERIES COBO OINT ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D H D 0 B 0 Short machine taps aschinengewindebohrer kurz NUT d STI HAND IE ØD 0 itch ED No. TC TC TC0 TC TC TC TC TC TC TC TC ØD Ød ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% 0 phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

17 OINT TC SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD... 0 itch profile not ISO ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr

18 OINT TC SERIES COBO OINT ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D H D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD 0 0 itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC0 TC TC0 TC TC TC TC ØD Ød Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

19 OINT TD SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D H D 0 B TiN 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD... 0 itch profile not ISO ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr

20 OINT TD SERIES COBO OINT ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D H D 0 B TiN 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD 0 0 itch ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD0 TD TD0 TD TD TD TD ØD Ød Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

21 OINT TQ SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web and the best substrate. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke und bestem Werkstoff. COBO OINT FLUTE HSS D / H D 0 B Vap 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD. 0 itch ED No. TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ (~0) and () ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

22 OINT TR SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web and the best substrate. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke und bestem Werkstoff. FLUTE FORING HSS D / H D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD. 0 itch ED No. TR TR TR TR TR TR TR TR TR TR TR TR TR (~0) and () ØD Ød Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

23 OINT TC SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC0 TC TC0 TC TC0 TC TC TC TC (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 loy 00 Cu < Cu loy Short Cu loy Long 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

24 OINT TE SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde Recommended for tapping abrasive materials due to nitriding, not suitable for tapping tough or high strength materials. Empfohlen für das Gewindeschneiden verschleißfordernder Werkstoffe wegen der trierung; nicht geeignet für das Gewinden zaher oder hochfester Werkstoffe. FLUTE FORING D / H D 0 B NI 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE0 TE TE0 TE TE0 TE TE TE TE (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 loy 00 Cu < Cu loy Short Cu loy Long phone:+0, fax:+, yg@yg.kr 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR

25 OINT TD SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / H D 0 B TiN 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD0 TD TD0 TD TD0 TD TD TD TD (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 loy 00 Cu < Cu loy Short Cu loy Long 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

26 OINT TY SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FORING D / H D 0 B TiN 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY0 TY TY0 TY TY0 TY TY TY TY (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 loy 00 Cu < Cu loy Short Cu loy Long phone:+0, fax:+, yg@yg.kr 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR

27 OINT TQ SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web and the best substrate. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke und bestem Werkstoff. COBO OINT FLUTE HSS D / H D 0 B Vap 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD. 0 itch ED No. TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ (~0) and () ØD Ød STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

28 OINT TR SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web and the best substrate. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke und bestem Werkstoff. FLUTE FORING HSS D / H D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD. 0 itch ED No. TR TR TR TR TR TR TR TR TR TR TR TR TR (~0) and () ØD Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

29 OINT TC SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC0 TC TC0 TC TC TC TC (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 St. loy < loy 00 St. loy 00 Cu < Cu loy Short St. loy INOX Free INOX Aust. > 00 < < INOX < 0 ØD GG Cast GG Cast < GGG Cast < 00 Cu loy CuFe / g Long < Wrought Si 0% Si>0% d Ød : Excellent GGG Cast < 0 Ti < 00 : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

30 OINT TY SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FORING D / H D 0 B TiN 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY TY0 TY TY0 TY TY TY TY (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 St. loy < loy 00 St. loy 00 Cu < Cu loy Short phone:+0, fax:+, yg@yg.kr St. loy INOX Free INOX Aust. > 00 < < INOX < 0 ØD GG Cast GG Cast < GGG Cast < 00 GGG Cast < 0 Cu loy CuFe / g Long < Wrought Si 0% Si>0% d Ød : Excellent Ti < 00 : Good Ti loy < 00 FR

31 OINT TB SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / HX 0 B D Vap 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB0 TB TB0 TB TB TB TB (~0) and (~0) profile not ISO Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

32 OINT TCH SERIES COBO OINT ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D / HX 0 B D Hardslick 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH TCH0 TCH TCH0 TCH TCH TCH TCH (~0) and (~0) profile not ISO Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long phone:+0, fax:+, yg@yg.kr 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR

33 OINT T SERIES HSS Az ISO metric coarse threads etrisches ISOGewinde Interrupted tap to reduce contact area and tapping torque, and to give more chip space. Gewindebohrer mit ausgesetzten Zahnen um die ontaktzone mit dem Werkstuck und das Drehmoment zu minimieren und dem Span mehr Raum zu geben. COBO OINT FLUTE HSS D / H D 0 B 0 acnhine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. T T T T T T T T T T T T T T T T T T T0 T T0 T T T T (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 St. loy < loy 00 Cu < Cu loy Short Cu loy Long 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

34 OINT TZ SERIES COBO OINT FLUTE Az ISO metric coarse threads etrisches ISOGewinde Interrupted tap to reduce contact area and tapping torque, and to give more chip space. Gewindebohrer mit ausgesetzten Zahnen um die ontaktzone mit dem Werkstuck und das Drehmoment zu minimieren und dem Span mehr Raum zu geben. FLUTE FORING HSS D / H D 0 B TiN 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ0 TZ TZ0 TZ TZ TZ TZ (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 St. loy < loy 00 Cu < Cu loy Short Cu loy Long phone:+0, fax:+, yg@yg.kr 0 0 CuFe / g < Wrought ØD Si 0% Si>0% d Ød : Excellent : Good St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR

35 OINT TQ SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web and the best substrate. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke und bestem Werkstoff. COBO OINT FLUTE HSS D / H D 0 B Vap 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD. 0 itch ED No. TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ TQ (~0) and () ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 < 00 < St. loy < : Excellent : Good St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy loy Cu Cu loy Cu loy < < Short Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

36 OINT TR SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web and the best substrate. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke und bestem Werkstoff. FLUTE FORING HSS D / H D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD. 0 itch ED No. TR TR TR TR TR TR TR TR TR TR TR TR TR (~0) and () ØD Ød Unit : N/mm < 00 Ti loy 00 < 00 < St. loy < : Excellent : Good St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy loy Cu Cu loy Cu loy < < Short Long CuFe / g < Wrought Si 0% Si>0% 0 phone:+0, fax:+, yg@yg.kr FR

37 OINT T SERIES HSS ISO metric coarse threads etrisches ISOGewinde For tapping ckel alloys and heat resistant alloy steels which are used in aero space and checmical industries. Zum Gewindeschneiden von ckellegierungen und hitzefesten Legierungsstählen, die in der Luftfahrtindustrie und chemischen Industrie verwendet werden. COBO OINT FLUTE HSS D / H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. T T T T T T T T T T T T T T T T T T T0 T T0 T T T T (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < St. loy < St. loy 00 St. loy > INOX Free < loy loy Cu Cu loy Cu loy < < Short Long INOX Aust. < CuFe INOX < 0 / g < ØD GG Cast Wrought GG Cast < 0 Si 0% GGG Cast < 00 Si>0% Ød phone:+0, fax:+, yg@yg.kr d : Excellent GGG Cast < 0 Ti < 00 : Good Ti loy < 00 FR NUT STI HAND IE ILLS

38 OINT TZ SERIES COBO OINT FLUTE ISO metric coarse threads etrisches ISOGewinde For tapping ckel alloys and heat resistant alloy steels which are used in aero space and checmical industries. Zum Gewindeschneiden von ckellegierungen und hitzefesten Legierungsstählen, die in der Luftfahrtindustrie und chemischen Industrie verwendet werden. FLUTE FORING HSS D / H D 0 B TiN 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ0 TZ TZ0 TZ TZ TZ TZ (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < St. loy < St. loy 00 St. loy > 00 phone:+0, fax:+, yg@yg.kr 0 0 INOX Free < loy loy Cu Cu loy Cu loy < < Short Long INOX Aust. < CuFe INOX < 0 / g < Wrought ØD GG Cast GG Cast < 0 Si 0% GGG Cast < 00 Si>0% GGG Cast < 0 d Ød : Excellent Ti < 00 : Good Ti loy < 00 FR

39 OINT TE SERIES HSS ISO metric coarse threads etrisches ISOGewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / H D 0 B NI 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE0 TE TE0 TE TE TE TE (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 St. loy < loy 00 St. loy 00 Cu < St. loy > 00 Cu loy Short 0 0 INOX Free < Cu loy Long INOX Aust. < CuFe INOX < 0 / g < ØD GG Cast Wrought GG Cast < 0 Si 0% GGG Cast < 00 Si>0% Ød phone:+0, fax:+, yg@yg.kr d : Excellent GGG Cast < 0 Ti < 00 : Good Ti loy < 00 FR NUT STI HAND IE ILLS

40 OINT TC SERIES COBO OINT FLUTE Az ISO metric coarse threads etrisches ISOGewinde Interrupted tap to reduce contact area and tapping torque, and to give more chip space. Gewindebohrer mit ausgesetzten Zahnen um die ontaktzone mit dem Werkstuck und das Drehmoment zu minimieren und dem Span mehr Raum zu geben. FLUTE FORING D / H D 0 B 0 achine taps aschinengewindebohrer NUT STI HAND IE ILLS ØD itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC0 TC TC0 TC TC TC TC (~0) and (~0) profile not ISO Ti loy 00 loy < 00 loy 00 Cu < phone:+0, fax:+, yg@yg.kr ØD Cu loy Cu loy CuFe / g Short Long < Wrought Si 0% Si>0% d Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 FR

41 OINT TC SERIES HSS F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD itch... ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr

42 OINT TC SERIES COBO OINT F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D H D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD 0 0 itch ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC ØD..... Ød... Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

43 OINT TD SERIES HSS F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D H D 0 B TiN 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD itch... ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr

44 OINT TD SERIES COBO OINT F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D H D 0 B TiN 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD 0 0 itch ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD ØD..... Ød... Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

45 OINT TC SERIES HSS F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D H D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD itch... ED No. TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

46 OINT TD SERIES COBO OINT F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FLUTE FORING D H D 0 B TiN 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD itch... ED No. TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD ØD Ød Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% 0 phone:+0, fax:+, yg@yg.kr FR

47 OINT TB SERIES HSS F ISO metric fine threads etrisches ISOFeingewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D HX 0 B D Vap 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD itch... ED No. TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB ØD Ød STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

48 OINT TC SERIES COBO OINT FLUTE UNC Unified coarse threads Unified Grobgewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FORING D / B D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD # # # # #0 # /" /" /" /" /" /" /" /" /" " */" TI 0 UNC 0 UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC 0 UNC UNC UNC UNC ED No. TC TC TC TC TC TC TC0 TC TC TC TC TC0 TC TC0 TC TC TC (#~/") and (/"~*/") ØD Ød Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

49 OINT TC SERIES HSS UNC Unified coarse threads Unified Grobgewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / B D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD # # # # #0 # /" /" /" /" /" /" /" /" /" " */" TI 0 UNC 0 UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC 0 UNC UNC UNC UNC ED No. TC TC TC TC TC TC TC0 TC TC TC TC TC0 TC TC0 TC TC TC (#~/") and (/"~*/") ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

50 OINT TD SERIES COBO OINT FLUTE UNC Unified coarse threads Unified Grobgewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FORING D / B D 0 B TiN 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD # # # # #0 # /" /" /" /" /" /" /" /" /" " */" TI 0 UNC 0 UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC 0 UNC UNC UNC UNC ED No. TD TD TD TD TD TD TD0 TD TD TD TD TD0 TD TD0 TD TD TD (#~/") and (/"~*/") ØD Ød Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

51 OINT TB SERIES HSS UNC Unified coarse threads Unified Grobgewinde Suitable for through hole in more cutting speed than other taps due to thick web. Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. COBO OINT FLUTE D / B D 0 B Vap 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD # # # # #0 # /" /" /" /" /" /" /" /" /" " */" TI 0 UNC 0 UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC 0 UNC UNC UNC UNC ED No. TB TB TB TB TB TB TB0 TB TB TB TB TB0 TB TB0 TB TB TB (#~/") and (/"~*/") ØD Ød STI HAND IE ILLS Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

52 COBO OINT FLUTE OINT UNF Unified fine threads Unified Feingewinde Suitable for through hole in more cutting speed than other taps due to thick web. TC SERIES Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FORING D / B D 0 B 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD # # # # #0 # /" /" /" /" /" /" /" /" /" " */" TI UNF UNF 0 UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF ED No. TC TC TC TC0 TC TC TC TC TC0 TC TC TC TC TC TC TC0 TC (#~/") and (/"~*/") ØD Ød Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

53 OINT UNF Unified fine threads Unified Feingewinde Suitable for through hole in more cutting speed than other taps due to thick web. TC SERIES Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. HSS COBO OINT FLUTE D / B D 0 B 0 achine taps aschinengewindebohrer FLUTE FORING NUT d ØD # # # # #0 # /" /" /" /" / " /" /" /" /" " */" TI UNF UNF 0 UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF ED No. TC TC TC TC0 TC TC TC TC TC TC TC TC TC TC TC TC0 TC (#~/") and (/"~*/") ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 < 00 < loy < 00 : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% FR phone:+0, fax:+, yg@yg.kr

54 COBO OINT FLUTE OINT UNF Unified fine threads Unified Feingewinde Suitable for through hole in more cutting speed than other taps due to thick web. TB SERIES Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. FLUTE FORING D / B D 0 B Vap 0 achine taps aschinengewindebohrer NUT d STI HAND IE ILLS ØD # # # # #0 # /" /" /" /" /" /" /" /" /" " */" TI UNF UNF 0 UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF ED No. TB TB TB TB0 TB TB TB TB TB0 TB TB TB TB TB TB TB0 TB (#~/") and (/"~*/") ØD Ød Unit : N/mm : Excellent : Good St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti loy < 00 < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 < 00 Ti loy 00 loy < 00 loy 00 Cu < Cu loy Short Cu loy Long CuFe / g < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr FR

55 OINT BSW Whitworth threads Whitworth Gewinde Suitable for through hole in more cutting speed than other taps due to thick web. TC SERIES Geeignet für Durchgangslöcher in höherer Schnittgeschwindigkeit als bei anderen Gewindebohrern dank größerer erndicke. HSS COBO OINT FLUTE D / B D achine taps aschinengewindebohrer FLUTE FORING NUT d ØD W/" W/" W/" W/" W/" W/" W/" W/" W/" W/" W/" W/" W/" W" W*/" TI 0 0 ED No. TC0 TC TC TC0 TC00 TC0 TC0 TC TC0 TC00 TC0 TC00 TC0 TC0 TC 0 0 (W/"~W/") and (W/"~W*/") ØD Ød STI HAND IE ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr

56 XOWER JET OWER V ILL ALU OWER CBN DOWER X0 END ILLS TOOL HOLDER TAN OWER THROWAWAY DRILLS idrea DRILL ixmill INSERTS & HOLDERS ROTARY BURRS DRILLS TWIST DRILLS ILLS ILLS COUNTERSIN REAER REAER HSS ILLING CUTTER & COUNTER BORES Challenge toward a Global Leader YG Leads the World arket.

57 Being the best through innovation FLUTE GEWINDEBOHRER IT DRALL Tapping Blind Holes, & HSS Für Sacklöcher. und HSS

58 SELECTION GUIDE FLUTE Tapping Blind Holes, & HSS FLUTE ED No. ODEL Tool aterial Standard Work aterial Dimensions Tolerance Chamfer Surface Treatment AGE TC GS ISO /H C TC GS / ISO /H C TC GS / ISO /H C TC GS / ISO /H C TD GS / ISO /H C TiN TQ HSS VG / ISO /H C vap TR HSS VG / ISO /H C 0 TB VG / ISO /H C vap TB VG / ISO /H C vap TC VG / ISO /H C TD VG / ISO /H C TiN TY VG / ISO /H C TiN TQ HSS VA / ISO /H C vap TR HSS VA / ISO /H C TB HR / ISO /H C vap TC HR / ISO /H C TY HR / ISO /H C TiN 00 TB VA NW / ISO /H C vap 0 TCH VA NW / ISO /H C Hardslick 0 TB NW / ISO /H C vap 0 T0 HSS Ti / ISO /H C 0 TZ0 HSS Ti / ISO /H C TiN 0 phone:+0, fax:+, yg@yg.kr

59 ACHINE FLUTE ED No. ODEL Tool aterial Standard Work aterial Dimensions Tolerance Chamfer Surface Treatment AGE TQ HSS Ti / ISO /H C vap 0 TR HSS Ti / ISO /H C 0 T HSS / ISO /H C 0 TZ HSS / ISO /H C TiN 0 TC / ISO /H C 0 TE / ISO /H C NI TC F GS ISO /H C TD F GS ISO /H C TiN TC F VG ISO /H C TD F VG ISO /H C TiN TB F VA NW ISO /H C vap TC F ISO /H C TC UNC GS / B C TC UNC VG / B C TD UNC VG / B C TiN TB0 UNC VA NW / B C vap TC UNC / B C TC UNF GS / B C TC UNF VG / B C TB UNF VA NW / B C vap TC0 UNF / B C TC BSW GS / C phone:+0, fax:+, yg@yg.kr

60 FLUTE TC SERIES COBO OINT ISO metric coarse threads etrisches ISOGewinde Suitable for tapping blind holes due to special flute geometry and excellent chip evacuation. Geeignet zum Gewinden von Sacklöchern dank besonderer Nutengeometrie und ausgezeichneter Spanabfuhr. FLUTE FLUTE FORING D H D 0 C R 0 Short machine taps aschinengewindebohrer kurz NUT d STI HAND IE ØD 0 itch ED No. TC TC TC TC TC TC TC TC TC0 TC TC ØD..... Ød ILLS Unit : N/mm < 00 Ti loy 00 : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% phone:+0, fax:+, yg@yg.kr : Good Ti loy < 00 FR

61 FLUTE TC SERIES HSS ISO metric coarse threads etrisches ISOGewinde Left spiral flute and right hand cut tap to push chips ahead in powerful than spiral point taps. Rechtsschneidender Gewindebohrer mit Linksdrall um kraftvoller nach vorne zu entspanen als mit Gewindebohrern mit Rechtsdrall. COBO OINT FLUTE D / H D 0 C L 0 achine taps aschinengewindebohrer FLUTE FORING ØD itch ED No. TC TC TC TC TC TC0 TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC TC (~0) and (~0) profile not ISO Unit : N/mm < 00 Ti loy ØD loy loy Cu Cu loy Cu loy CuFe / g < < Short Long < Wrought Si 0% Si>0% d Ød : Excellent St. loy St. loy St. loy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti < 00 < < 00 > 00 < < < 0 < 0 < 00 < 0 < 00 : Good Ti loy < 00 FR phone:+0, fax:+, yg@yg.kr NUT STI HAND IE ILLS

Produktinformation Product information

Produktinformation Product information Produktinformation Product information Handgewindebohrer Handgewindebohrer führen wir im EVENTUS -Programm in gebräuchlichen Sorten und Abmessungen, profilgeschliffen und hinterschliffen, aus. Fragen Sie

Mehr

NC-SPOTTING DRILLS HSS NC-ANBOHRER. - HSS(8% COBALT) Centering and Chamfering of Holes. Being the best through innovation

NC-SPOTTING DRILLS HSS NC-ANBOHRER. - HSS(8% COBALT) Centering and Chamfering of Holes. Being the best through innovation Being the best through innovation NC-ANBOHRER - (8% COBALT) Centering and Chamfering of Holes - -Co8 NC-ANBOHRER Zum Zentrieren und Anfasen SELECTION GUIDE (8% Cobalt) Centering and Chamfering of Holes

Mehr

CARBIDE. Being the best through innovation NC-SPOTTING DRILLS NC-ANBOHRER. - CENTERING and CHAMFERING. - Zentrier & Abfasen

CARBIDE. Being the best through innovation NC-SPOTTING DRILLS NC-ANBOHRER. - CENTERING and CHAMFERING. - Zentrier & Abfasen Being the best through innovation NC-ANBOHRER - ING and CHAMFERING - Zentrier & Abfasen SELECTION GUIDE SOLID For General materials, Cast steels, Cast iron, Non-ferrous materials ITEM MODEL DESCRIPTION

Mehr

NC-SPOTTING DRILLS HSS NC-ANBOHRER. Being the best through innovation - HSS(8% COBALT) Centering and Chamfering of Holes. - HSS-Co8 NC-ANBOHRER

NC-SPOTTING DRILLS HSS NC-ANBOHRER. Being the best through innovation - HSS(8% COBALT) Centering and Chamfering of Holes. - HSS-Co8 NC-ANBOHRER Being the best through innovation NC-ANBOHRER - (8% COBALT) Centering and Chamfering of Holes - -Co8 NC-ANBOHRER Zum Zentrieren und Anfasen SELECTION GUIDE (8% Cobalt) Centering and Chamfering of Holes

Mehr

NC-SPOTTING DRILLS HSS NC-ANBOHRER. Being the best through innovation - HSS(8% COBALT) Centering and Chamfering of Holes. - HSS-Co8 NC-ANBOHRER

NC-SPOTTING DRILLS HSS NC-ANBOHRER. Being the best through innovation - HSS(8% COBALT) Centering and Chamfering of Holes. - HSS-Co8 NC-ANBOHRER Being the best through innovation NC-ANBOHRER - (8% COBALT) Centering and Chamfering of Holes - -Co8 NC-ANBOHRER Zum Zentrieren und Anfasen SELECTION GUIDE (8% Cobalt) Centering and Chamfering of Holes

Mehr

TECHNIK FÜR GEWINDE SMARTLINE

TECHNIK FÜR GEWINDE SMARTLINE SMARTLINE VARIANT N VARIANT N DURCHGANGSLOCH - MASCHINENGEWINDEBOHRER TAPS FOR THROUGH HOLES DURCHGANGSLOCH - MASCHINENGEWINDEBOHRER TAPS FOR THROUGH HOLES VARIANT HH VARIANT von Durchgangslöchern einsetzbar

Mehr

V7 Mill STEEL V7 FRÄSER CARBIDE. - Steels in Heavy and Silent Cutting Materials up to HRc40. Designed as Unequal Leads.

V7 Mill STEEL V7 FRÄSER CARBIDE. - Steels in Heavy and Silent Cutting Materials up to HRc40. Designed as Unequal Leads. Being the best through innovation V7 FÄSE in Heavy and Silent Cutting Materials up to Hc40. Designed as Unequal Leads. Für Stähle in schwerem und ruhigem Schnitt bis zu Hc40. Ungleiche Teilung SELECTION

Mehr

Spiralo 48 TS TiN Spiralo 45 ZB TiN/VAP

Spiralo 48 TS TiN Spiralo 45 ZB TiN/VAP Spiralo 45 ZB TiN/VAP Spiralo 45 ZB TiN/VAP Beschreibung wurde entwickelt, um eine einwandfreie Späneabfuhr bei tiefen Sacklöchern in langspanenden Werkstoffen zu ermöglichen. Die besondere Nutengeometrie

Mehr

Gwintowniki maszynowe ogólnego przeznaczenia General purpose machine taps Maschinengewindebohrer für allgemeine Anwendung

Gwintowniki maszynowe ogólnego przeznaczenia General purpose machine taps Maschinengewindebohrer für allgemeine Anwendung Gwintowniki maszynowe ogólnego przeznaczenia General purpose machine taps aschinengewindebohrer für allgemeine Anwendung GWINTOWNIKI ASZYNOWE OGÓLNEGO RZEZNACZENIA GENERAL UROSE ACHINE TAS ASCHINENGEWINDEBOHRER

Mehr

EUROPE SPIRAL FLUTE / GUN POINT

EUROPE SPIRAL FLUTE / GUN POINT EUROE SIRA FUTE / GUN OINT Spiralnuten Schälanschnitt SIRA FUTE / GUN OINT TEST RESUT AGAINST COMETITOR'S TA Testergebnis gegen Gewinebohrer es Wettbewerbs TESTⅠ- M8 x 1.25 Test Conition Testbeingungen

Mehr

Threading Programme Gewindewerkzeuge 05

Threading Programme Gewindewerkzeuge 05 05 233 234 Product Overview / Produktubersicht / THREAD MILLING TOOLS GEWINDEFR SER The Type N thread milling cutters from FMT with a special geometry are suitable for production of outside and inside

Mehr

HANDGEWINDE MANUAL OPERATION

HANDGEWINDE MANUAL OPERATION HANDGEWINDE MANUAL OPERATION Handgewindebohrer Hand Taps metrisch metrisch fein BSW BSP (G) UNC UNF Trapez EXACT EVENTUS 8-9 2-25 28-29 3 33-34 36-37 39 by EXACT 42-43 45-46 48 Schneideisen / Schneidmuttern

Mehr

Gewinde - Kernloch-Ø und Kern-Ø Muttergewinde Drill-Ø for Threads and Minor-Ø of Nut Threads

Gewinde - Kernloch-Ø und Kern-Ø Muttergewinde Drill-Ø for Threads and Minor-Ø of Nut Threads Drill-Ø for Threads and of s M Metr. ISO - Regelgewinde, 6H (5H) 1) Metric ISO - Coarse Thread 6H (5H) P Ø M 1 0,25 0,75 0,729 0,785 M 1,1 0,25 0,85 0,829 0,885 M 1,2 0,25 0,95 0,929 0,985 M 1,4 0,3 1,10

Mehr

Gewindebohrer aus HSS-E - Aluminium HSS-E Taps

Gewindebohrer aus HSS-E - Aluminium HSS-E Taps 360 123 125 400 Gewindebohrer aus HSS- - Aluminium HSS- Taps : Langspanende Stähle und N-etalle Schälanschnitt für urchgangslöcher bis 2,5xØ Tiefe Ausgesetzte Zähne für geringeres rehmoment Bis 10 mit

Mehr

2015/2016. Neues Programm New program. Innengewindeformer Forming taps

2015/2016. Neues Programm New program. Innengewindeformer Forming taps 2015/2016 Neues Programm New program 1 Technische Informationen Technical information Eine neue Geometrie, in Verbindung mit einer speziell oberfl ächenbehandelten -Beschichtung, zeichnen diese aus. Hierdurch

Mehr

EG-UNC Unified Grobgewinde für Draht-Gewindeeinsätze NASM Maschinen-Gewindebohrer, Baumaße DIN

EG-UNC Unified Grobgewinde für Draht-Gewindeeinsätze NASM Maschinen-Gewindebohrer, Baumaße DIN Gewindebohrer / Gewindeformer Seite Der Weg zum richtigen Gewindebohrer / Gewindeformer 13 Anwendungstabelle 15-18 Finder (Typenaufstellung) 20-31 etrisches ISO-Regelgewinde DIN 13 Handgewindebohrer G0

Mehr

P R Ä Z I S I O NINFO

P R Ä Z I S I O NINFO Gewindebohrer Automat 20 Taps for automatic lathes Automat 20 P R Ä Z I S I O NINFO Gewindebohrer Automat 20 Taps for automatic lathes Automat 20 Beschreibung Automat 20 ist ein extra kurzer Gewindebohrer

Mehr

- Carbide Roughing End Mills for High-Feed Machining with reduced vibrations

- Carbide Roughing End Mills for High-Feed Machining with reduced vibrations CABIDE Being the best through innovation OUGHE OUGHE FÄSE - Carbide oughing End Mills for High-Feed Machining with reduced vibrations - VHM Schrupp Fräser für die HSC Bearbeitung mit verminderten Vibrationen

Mehr

Threading Programme Gewindewerkzeuge 05

Threading Programme Gewindewerkzeuge 05 232 05 233 234 Product Overview / Produktubersicht / THREAD MILLING TOOLS GEWINDEFR SER cutters from FMT with a special geometry are suitable for production of outside and inside milling of threads. With

Mehr

- Roughing End Mills for High-Feed Machining with reduced vibrations - Schrupp Fräser für die HSC Bearbeitung mit verminderten Vibrationen

- Roughing End Mills for High-Feed Machining with reduced vibrations - Schrupp Fräser für die HSC Bearbeitung mit verminderten Vibrationen CABIDE Being the best through innovation OUGHE OUGHE FÄSE - oughing End Mills for High-Feed Machining with reduced vibrations - Schrupp Fräser für die HSC Bearbeitung mit verminderten Vibrationen SELECTION

Mehr

i-hs mill FRÄSER CARBIDE INSERT & HOLDER Being the best through innovation - For machining General Steels and Cast Iron, Ductile Cast Iron

i-hs mill FRÄSER CARBIDE INSERT & HOLDER Being the best through innovation - For machining General Steels and Cast Iron, Ductile Cast Iron CARBIDE INSERT & HOLDER Being the best through innovation FRÄSER - For machining General Steels and Cast Iron, Ductile Cast Iron - Zur Bearbeitung von Stahl und Gusseisen, Sphäroguss SELECTION GUIDE SIZE

Mehr

Produktbeschreibung Gewindebohrer / Gewindeformer. Gewinde-Kernloch-Ø und Kern-Ø Muttergewinde. Beschichtungen

Produktbeschreibung Gewindebohrer / Gewindeformer. Gewinde-Kernloch-Ø und Kern-Ø Muttergewinde. Beschichtungen Technischer Teil Seite Produktbeschreibung Gewindebohrer / Gewindeformer Gewinde-Kernloch-Ø und Kern-Ø Muttergewinde Beschichtungen Begriffe und Bezeichnungen an Gewindebohrern / Gewindeformern Anschnittformen

Mehr

Gewindebohrer aus HSS-E - Lang HSS-E Long Series Taps

Gewindebohrer aus HSS-E - Lang HSS-E Long Series Taps 306 123 300 400 ewindebohrer aus HSS- - Lang HSS- Long Series Taps : Stähle bis 00 N/mm² edrallt für rundlöcher bis 2xØ ewindetiefe Langer nschnitt ang Oberfläche blank N: Steels up to 00 N/mm² Spiral

Mehr

V7 Mill STEEL. - Steels in Heavy and Silent Cutting Materials up to HRc40.Designed as Unequal Leads.

V7 Mill STEEL. - Steels in Heavy and Silent Cutting Materials up to HRc40.Designed as Unequal Leads. Being the best through innovation V7 FÄSE in Heavy and Silent Cutting Materials up to Hc40.Designed as Unequal Leads. Für Stähle in schwerem und ruhigem Schnitt bis zu Hc40.Ungleiche Teilung SELECTION

Mehr

Nirofix 48 STY/WC Nirofix Z STY/WC

Nirofix 48 STY/WC Nirofix Z STY/WC Nirofix 48 STY/WC Nirofix Z STY/WC Nirofix 48 STY/WC Nirofix Z STY/WC Beschreibung Die Gewindebohrer Nirofix 48 STY/WC und "Nirofix Z STY/WC" sind die konsequenten Weiterentwicklungen unserer bewährten

Mehr

A, B, C, D, E, F, G, H, J, K, L, M, N

A, B, C, D, E, F, G, H, J, K, L, M, N YE-RT10 CARBIDE ROTARY BURRS FRÄSSTIFTE AUS HARTMETALL - For removal sharp corners, Burrs and fins etc. - Micro grain carbide, Form A, B, C, D, E, F, G, H, J, K, L, M, N with YG-1 Unique design technology,

Mehr

Wir leben Werkzeuge! We live tools!

Wir leben Werkzeuge! We live tools! Wir leben Werkzeuge! We live tools! KATALOG 2019 / 2020 Wir leben Werkzeuge! We live tools! ZIRA Gewindewerkzeuge das bedeutet heute mehr denn je umfassende Kompetenz rund um Präzisionsgewinde. ZIRA Precision

Mehr

EME05 SERIES EME06 SERIES. V7 Mill STEEL END MILLS

EME05 SERIES EME06 SERIES. V7 Mill STEEL END MILLS CABIE X0 V STEEL Special flute geometry and multiple helix eliminate vibrations esigned to machine mild steels, cast irons, tool steels, and low hardened steels up to Hc. Excellent work piece finishes.

Mehr

SORTIMENTE ASSORTMENTS

SORTIMENTE ASSORTMENTS SORTIMENTE ASSORTMENTS Maschinen- und Handgewinde Machine- and manual operation Maschinengewinde Machine operation EXACT EVENTUS 221 222 by EXACT Handgewinde Hand operation fein BSW BSP (G) UNC UNF Gewindereparatur

Mehr

SORTIMENTE ASSORTMENTS

SORTIMENTE ASSORTMENTS SORTIMENTE ASSORTMENTS Maschinen- und Handgewinde Machine- and manual operation Maschinengewinde Machine operation EXACT EVENTUS 221 222 by EXACT Handgewinde Hand operation fein BSW BSP (G) UNC UNF Gewindereparatur

Mehr

i-hs mill FRÄSER CARBIDE INSERT & HOLDER Being the best through innovation - For machining General Steels and Cast Iron, Ductile Cast Iron

i-hs mill FRÄSER CARBIDE INSERT & HOLDER Being the best through innovation - For machining General Steels and Cast Iron, Ductile Cast Iron INSERT & HOLDER Being the best through innovation FRÄSER - For machining General Steels and Cast Iron, Ductile Cast Iron - Zur Bearbeitung von Stahl und Gusseisen, Sphäroguss SELECTION GUIDE SIZE ITEM

Mehr

RECORD EVOLUTION VA 34

RECORD EVOLUTION VA 34 EVOLUTION EVOLUTION TECHNISCHE DATEN / TECHNICAL DATA Der neue Record Evolution garantiert durch seine spezielle Nutengeometrie idealen Spantransport bei hohen Schnittgeschwindigkeiten und, durch die Form

Mehr

Schneidstoffleitfaden Cutting Grade Guide

Schneidstoffleitfaden Cutting Grade Guide Schneidstoffleitfaden Cutting Grade Guide SIMTEK Präzisionswerkzeuge GmbH Richard-Burkhardt-Strasse 11 DE-72116 Mössingen Deutschland/Germany Tel: +49 7473 9517-0 Fax: +49 7473 9517-77 Internet: http://www.simtek.de

Mehr

GEWINDETECHNOLOGIE MADE IN GERMANY. SEIT THREAD TECHNOLOGY MADE IN GERMANY. SINCE PREISLISTE / PRICE LIST 2.2

GEWINDETECHNOLOGIE MADE IN GERMANY. SEIT THREAD TECHNOLOGY MADE IN GERMANY. SINCE PREISLISTE / PRICE LIST 2.2 GEWINDETECHNOLOGIE ADE IN GERANY. SEIT 1905. THREAD TECHNOLOGY ADE IN GERANY. SINCE 1905. REISLISTE / RICE LIST 2.2 Neoboss Gewindebohrer / Taps 2.2 reisliste / rice List Inhalt Die vorliegende reisliste

Mehr

Die Kompetenz für hochlegierte Werkstoffe The competence for high-alloy materials

Die Kompetenz für hochlegierte Werkstoffe The competence for high-alloy materials Die Kompetenz für hochlegierte Werkstoffe The competence for high-alloy materials INOX HASTELLOY VERGÜTUNGSSTÄE HEAT-TREATABLE STEELS WERKZEUGSTÄE TOOL-STEELS 2016 1 Anschnitt Chamfer Innenkühlung Internal

Mehr

Wir leben Werkzeuge! Seit 60 Jahren!

Wir leben Werkzeuge! Seit 60 Jahren! Wir leben Werkzeuge! Seit 60 Jahren! 2018 Preisliste zzgl. MwSt. Seite / Page Handgewindebohrer Hand Taps M-MF-BSW-UNC-UNF-BSF-G-PG-TR-NPT 2-15 Bits Maschinengewindebohrer Machine Taps 16-31 M-MF-BSW-UNC-UNF-G-TR

Mehr

Inhaltsverzeichnis Contents. Micro Schneidwerkzeuge Micro Cutting Tools. Klemmhalter Toolholders 6.02

Inhaltsverzeichnis Contents. Micro Schneidwerkzeuge Micro Cutting Tools. Klemmhalter Toolholders 6.02 Inhaltsverzeichnis Contents Cutting Tools Seite Page Klemmhalter Toolholders 6.02 -Schneideinsätze (Feinkorn-Hartmetall) zum: -Inserts ( Grain Carbide) for: Kopierdrehen / Copying 35 4.2 mm 6.04 Ausdrehen

Mehr

SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS

SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS 122 SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS DIN DIN Qualität Quality

Mehr

RECORD HD. Schnittwertempfehlung / Cutting data TECHNISCHE DATEN / TECHNICAL DATA

RECORD HD. Schnittwertempfehlung / Cutting data TECHNISCHE DATEN / TECHNICAL DATA Der ILIX Bohrer ist seit Jahren eine feststehende Größe in der Stahlbearbeitung. The ILIX is an established drill for the machining of steel. 26 TECHNISCHE DATEN / TECHNICAL DATA Hauptmerkmale: Spanbrechende

Mehr

Maschinenreibahlen aus HSS-E05 - Überlang HSS-E05 Extra Long Series Machine Reamers

Maschinenreibahlen aus HSS-E05 - Überlang HSS-E05 Extra Long Series Machine Reamers 513 12 Maschinenreibahlen aus HSS-5 - Überlang HSS-5 xtra Long Series Machine Reamers : Anschnitt 45, Toleranz H7 Spanauswurf in Schnittrichtung, daher zum Reiben von urchgangsbohrungen 1 Linksspirale,

Mehr

VHM FRÄSER SOLID CARBIDE MILLS

VHM FRÄSER SOLID CARBIDE MILLS VHM FRÄSER SOLID CARBIDE MILLS Economy-Line GUT WIE IMMER - GÜNSTIG WIE NIE GOOD AS ALWAYS - CHEAP AS NEVER BEFORE SUPER NETTOENDPREISE! BEST NET FINAL PRICES! FRÄSER R BEREITS AB 6,50! MILLS STARTING

Mehr

Gewindeschneiden. Präzision für höchste Ansprüche Precison for highest requirements. Sonderaktion - Special offer - Offre spéciale

Gewindeschneiden. Präzision für höchste Ansprüche Precison for highest requirements. Sonderaktion - Special offer - Offre spéciale Präzision für höchste Ansprüche Precison for highest requirements Gewindeschneiden Tapping Mandrin de taraudage Sonderaktion - Special offer - Offre spéciale 1 HSS-E Gewindebohrer Metrisches ISO-Gewinde

Mehr

Maschinenreibahlen aus HSS-E0 - Lang MK-Schaft HSS-E05 Long Series Machine Reamers - Morse Taper Shank

Maschinenreibahlen aus HSS-E0 - Lang MK-Schaft HSS-E05 Long Series Machine Reamers - Morse Taper Shank 514 11 Maschinenreibahlen aus HSS- - Lang -Schaft HSS-5 Long Series Machine Reamers - Morse Taper Shank : Anschnitt 45, Toleranz Spanauswurf in Schnittrichtung, daher zum Reiben von urchgangsbohrungen

Mehr

- Cubic Boron Nitride, Machining High Hardened Steels up to HRc70, Mirror Finish

- Cubic Boron Nitride, Machining High Hardened Steels up to HRc70, Mirror Finish Being the best through innovation (Cubic Boron Nitride) FÄSE - Cubic Boron Nitride, Machining High Hardened up to Hc70, Mirror Finish - Kubisches Bornitrid, Zum Fräsen hoch gehärteter Stähle bis Hc70.

Mehr

Gewindeschneidsortimente Thread Cutting Assortments

Gewindeschneidsortimente Thread Cutting Assortments Gewindeschneidsortimente Thread Cutting Assortments M3 -E = Hochleistungsschnell-Stahl DIN 352 Für es ISO-Gewinde DIN 13, Toleranz 6H Anwendung Zum Schneiden von Gewinden. = High-speed-steel DIN 352 For

Mehr

K210. Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!!

K210. Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!! K2 Catalogue / 11 Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!! Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!!

Mehr

Grampelhuber GmbH Koaserbauerstrasse Gmunden Austria T: +43 (0) F: +43 (0) mail:

Grampelhuber GmbH Koaserbauerstrasse Gmunden Austria T: +43 (0) F: +43 (0) mail: Grampelhuber GmbH Koaserbauerstrasse 0 Gmunden / Austria Telefon: + (0) - 0-0 Telefax: + (0) - 0- office@grampelhuber.at www.grampelhuber.at MEHRFASEN-STUFENBOHRER / KURSTUFENBOHRER SUBLAND DRILLS / STUB

Mehr

Zerspanungswerkzeuge mit Anwendungsempfehlung im Überblick M MF BSP UNC UNF BSW M M M M M M MF MF M M

Zerspanungswerkzeuge mit Anwendungsempfehlung im Überblick M MF BSP UNC UNF BSW M M M M M M MF MF M M Gewinde Thread Zerspanungswerkzeuge mit Anwendungsempfehlung im Überblick 1 Overview of Chipping Tools with Recommendation Gewinde Thread DIN Norm/ DIN Norm 352 2181 5157 352 2181 351 352 377 371 376 371

Mehr

Zerspanungswerkzeuge mit Anwendungsempfehlung im Überblick Series Artikel-Gruppe/ Article-Group

Zerspanungswerkzeuge mit Anwendungsempfehlung im Überblick Series Artikel-Gruppe/ Article-Group Gewinde Thread Zerspanungswerkzeuge mit Anwendungsempfehlung im Überblick 1 Overview of Chipping Tools with Recommendation NEU/NEW NEU/NEW Gewinde Thread Qualität/ Quality STANDARD STANDARD STANDARD STANDARD

Mehr

GEWINDESCHNEIDEN THREAD CUTTING LEHREN GAUGES

GEWINDESCHNEIDEN THREAD CUTTING LEHREN GAUGES GEWINDESCHNEIDEN THREAD CUTTING LEHREN GAUGES Weitere Produktbereiche: Additional Products: Schleiftechnik / Grinding Services Gewindeschleifen Schleiflänge max. 2.000 mm, Schleif Ø max. 400 mm. Wir schleifen

Mehr

Vorstoß in neue Tiefen

Vorstoß in neue Tiefen Presseinformation August 2011 / 1. von 3 Seiten Werbung und PR Telefon (0 61 72) 1 06-461 Telefax (0 61 72) 1 06-213 E-Mail s.dillmann@wexo.com Vorstoß in neue Tiefen Neue Tieflochbohrer von WEXO bis 50xd

Mehr

Gewindeformer aus Pulvermetall - Aluminium Powder Metal Cold Forming Taps

Gewindeformer aus Pulvermetall - Aluminium Powder Metal Cold Forming Taps 360 123 190 400 ewindeformer aus ulvermetall - luminium owder etal old ing Taps : luminium-legierungen mit guter Kaltverformbarkeit rund- und urchgangslöcher bis 2xØ ewindetiefe Ohne Kühlnut für höhere

Mehr

Hand Gewindebohrer HSS-G DIN 352 3tlg Hand tap HSS-G DIN 352 3pcs

Hand Gewindebohrer HSS-G DIN 352 3tlg Hand tap HSS-G DIN 352 3pcs Gewinde Thread Art.-Nr. Seite page Hand Gewindebohrer -G DIN 352 3tlg 93000 Hand tap -G DIN 352 3pcs Hand Gewindebohrer Mf -G DIN 2181 2tlg 93500 Hand tap, metric-fine -G DIN 2181 2pcs Hand Gewindebohrer

Mehr

Kernbohrer Core Drills

Kernbohrer Core Drills Kernbohrer Core Drills 7 Kernbohrer I Core Drills Produktinformation Product information Vorteile I Advantages Optimierte Schneidengeometrie erhöht die Zerspanleistung und verringert die Schnittkräfte

Mehr

PROFICOIL. Professional Thread Repairing System

PROFICOIL. Professional Thread Repairing System PROFICOIL Professional Thread Repairing System GEWINDEREPARATUR THREAD REPAIRING PROFICOIL Gewindereparatur-Sortimente Thread Repairing Assortments metrisch / metrisch fein 3 Gewindereparatur-Sets Thread

Mehr

NEW PROFICOIL. Professional Thread Repairing System. Gewinde-Reparatur-System

NEW PROFICOIL. Professional Thread Repairing System. Gewinde-Reparatur-System NEW PROFICOIL Professional Thread Repairing System Gewinde-Reparatur-System Produktinformation Product information Gewindereparatur-Sets I Thread Repairing Kits PROFICOIL Professional Thread Repairing

Mehr

Improbond GmbH Rest

Improbond GmbH  Rest _9240 Werkstoff-Nr. 2.4831 Streckgrenze 420 N/mm 2 Zugfestigkeit 760 N/mm 2 35 % C < 0,02 % Mn 0,20 % Cr 22,00 % Mo 9,00 % Nb 3,50 % Fe < 1,00 % -Basis-Schweißzusatz zum Laserschweißen von artgleichen

Mehr

Catalog ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH. PO Box 1631 D Bietigheim-Bissingen. Schleifmuehle 7 D Bietigheim-Bissingen

Catalog ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH. PO Box 1631 D Bietigheim-Bissingen. Schleifmuehle 7 D Bietigheim-Bissingen Catalog 2016 ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH PO Box 1631 D 74306 Bietigheim-Bissingen Schleifmuehle 7 D 74321 Bietigheim-Bissingen Telefon +49 (0) 7142 / 920050 Telefax +49 (0) 7142 /

Mehr

K-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn

K-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn K-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn Vollhartmetallfräser für universellen Einsatz, wie Nutenfräsen, Seitenfräsen

Mehr

Alu-POWER FRÄSER für ALUMINIUM

Alu-POWER FRÄSER für ALUMINIUM Alu-POWE END S for Alu-POWE FÄSE für ALUMINIUM Alu-POWE END S SELECTION GUIDE EI92 CABIDE, 2, HELIX for, DIAMOND COATED VHM, 2 SCHNEIDEN, ECHTSSPIALE für ALUMINIUM, DIAMANT-BESCHICHTETE 1 EG9 CABIDE, 2,

Mehr

PRÄZISION. Katalog Catalogue

PRÄZISION. Katalog Catalogue PRÄZISION Katalog Catalogue Präzisionswerkzeuge in Vollhartmetall, Diamant und Cermets zum Bohren Senken Reiben Precision tools in solid carbide, diamond and cermets for drilling countersinking reaming

Mehr

i-xmill FRÄSER CARBIDE INSERT & HOLDER - Available for General Steels(~HRc50), Hardened Steels(up to HRc65) and Graphite

i-xmill FRÄSER CARBIDE INSERT & HOLDER - Available for General Steels(~HRc50), Hardened Steels(up to HRc65) and Graphite INSERT & HOLDER Being the best through innovation FRÄSER - Available for General (~HRc50), Hardened (up to HRc65) and Graphite - Lieferbar für normale, gehärtete Stähle bis HRc65 und graphit SELECTION

Mehr

GEWINDEWERKZEUGE. Precision Cutting Tools. + basic line TiN + Gewindeformer + Alu-Gewindebohrer + JIS

GEWINDEWERKZEUGE. Precision Cutting Tools. + basic line TiN + Gewindeformer + Alu-Gewindebohrer + JIS DE recision Cutting Tools GEWINDEWERKZEUGE DAS NEUE KOMLETTROGRAMM ZUR UNIVERSELLEN GEWINDEHERSTELLUNG NEW + basic line TiN + Gewindeformer + Alu-Gewindebohrer + JIS ISO-Code M K N S H Stahl, hochlegierter

Mehr

under 1.6mm unter 1.6mm Unit:mm FLUTE LENGTH

under 1.6mm unter 1.6mm Unit:mm FLUTE LENGTH EXTRA STUB EXTRA STUB DI 97 Co h P.6 DI 97 Co h P.6 : Sonderbohrer zum Einsatz auf Automaten und Revolverdrebänken. Geeignet für den Einsatz in Handbohrmaschinen zum Bohren von dünnwandigem Material. :

Mehr

4G Mill. 4G Mill FRÄSER. CARBIDE Being the best through innovation. - High Speed Cutting for Pre-Hardened Steels up to HRc55

4G Mill. 4G Mill FRÄSER. CARBIDE Being the best through innovation. - High Speed Cutting for Pre-Hardened Steels up to HRc55 CABIDE Being the best through innovation G G FÄSE High Speed Cutting for PreHardened up to Hc HighSpeedBearbeitung (HSC) von vorvergüteten Stählen bis Hc SELECTION GUIDE SIZE ITEM MODEL DESCIPTION PAGE

Mehr

BLECHSCHÄLBOHRER UND STUFENBOHRER TUBE & SHEET DRILLS AND STEP DRILLS

BLECHSCHÄLBOHRER UND STUFENBOHRER TUBE & SHEET DRILLS AND STEP DRILLS BLECHSCHÄLBOHRER UND STUFENBOHRER TUBE & SHEET DRILLS AND STEP DRILLS Blechschälbohrer Tube & Sheet Drills Qualitätsmerkmale und Materialbearbeitung mit Tenifer-Beschichtung Blechschälbohrer mit Spiralnute

Mehr

Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN

Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN DIN 800, mit Gewinde DIN 800, with thread A Tol. mittel A Mean tol. Bg5 Bg5 C Kleinstmaß C Minimum D E F D E F M20 21 30 6,3 10 20 M24 25 36

Mehr

HDS -Fräser. -Endmills. Gloster Tooling Supplies Ltd + = Increase in productivity at low tool cost thanks to newly developed tool material

HDS -Fräser. -Endmills. Gloster Tooling Supplies Ltd + = Increase in productivity at low tool cost thanks to newly developed tool material Gloster Tooling Supplies Ltd Telephone 01452 729210 email info@glostertooling.co.uk HDS -Fräser -Endmills Die leistungsstarke Alternative zu konventionellen HSS- und VHM-Fräsern. The powerful alternative

Mehr

Präzisions-Gewindewerkzeugfabrik TAPPING FOR EXPERTS. Gewindeschneidwerkzeuge. Threading Tools

Präzisions-Gewindewerkzeugfabrik TAPPING FOR EXPERTS. Gewindeschneidwerkzeuge. Threading Tools Präzisions-Gewindewerkzeugfabrik TAPPING FOR EXPERTS TOTAL-Programm Gewindeschneidwerkzeuge Threading Tools Preisliste 2009 / Price List 2009 TAPPING FOR EXPERTS Gewindeschneidwerkzeuge Threading Tools

Mehr

i-xmill CARBIDE INSERT & HOLDER -Available for General Steels and for Hardened Steels up to HRc70

i-xmill CARBIDE INSERT & HOLDER -Available for General Steels and for Hardened Steels up to HRc70 INSERT & HOLDER Being the best through innovation -Available for General and for Hardened up to HRc70 -Lieferbar für normale und gehärtete Stähle bis HRc70 SELECTION GUIDE ITEM MODEL DESCRIPTION PAGE XMBA

Mehr

V7 MILLS EMB41 EMB42 EMB43 EMB44 EMB14 EMB39 EMB15 EMB40 EMB74 EMB75 EMB72 EMB73 EMB12 EMB37 EMB13 EMB38. Aussergewöhnliche Standzeit EMB78 EMB79

V7 MILLS EMB41 EMB42 EMB43 EMB44 EMB14 EMB39 EMB15 EMB40 EMB74 EMB75 EMB72 EMB73 EMB12 EMB37 EMB13 EMB38. Aussergewöhnliche Standzeit EMB78 EMB79 V7 MILLS SELECTION GUIDE COMPLETELY NEW MILLING GENERATION Frischer Wind beim Fräsen - Breakup of the chattering and Minimized tool deflection by optimum design for faster & deeper machining Beendet Vibrationen

Mehr

Alu-POWER FRÄSER für ALUMINIUM

Alu-POWER FRÄSER für ALUMINIUM END S for FÄSE für ALUMINIUM END S SELECTION GUIDE EI92 CABIDE, 2, HELIX for, DIAMOND COATED VHM, 2 SCHNEIDEN, ECHTSSPIALE für ALUMINIUM, DIAMANT-BESCHICHTETE EG9 CABIDE, 2, HELIX for, TiCN COATED VHM,

Mehr

Querlochsenker 90 Deburring Countersinks 90

Querlochsenker 90 Deburring Countersinks 90 Querlochsenker 90 Deburring Countersinks 90 Querlochsenker Deburring Countersinks = Hochleistungsschnell-Stahl = Mit Titan-Nitrid Beschichtung Mit Zylinderschaft Besonders geeignet für langspanende Werkstoffe

Mehr

Maschinenreibahlen aus HSS-E05 - DIN 208 Form A HSS-E05 Machine Reamers with Morse Taper Shank

Maschinenreibahlen aus HSS-E05 - DIN 208 Form A HSS-E05 Machine Reamers with Morse Taper Shank 113 2 Maschinenreibahlen aus HSS-E5 - IN 28 Form HSS-E5 Machine Reamers with Morse Taper Shank E: nschnitt 45 Geradegenutet, rechtsschneidend Reiben von Grundbohrungen Toleranz Passungsmaße innerhalb 5

Mehr

Qualitätswerkzeuge. Quality Tools. WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application

Qualitätswerkzeuge. Quality Tools. WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application Qualitätswerkzeuge WAB POWERCUT Kernbohrsystem Das WAB POWERCUT Kernbohrsystem hat gegenüber dem Bohren mit Spiralbohrern

Mehr

GEWINDESCHNEIDWERKZEUGE THREAD CUTTING TOOLS

GEWINDESCHNEIDWERKZEUGE THREAD CUTTING TOOLS GEWINDESCHNEIDWERKZEUGE THREAD CUTTING TOOLS 106 GEWINDESCHNEIDWERKZEUGE THREAD CUTTING TOOLS DIN DIN Qualität Quality Bezeichnung Description Code Code Seite Page Handgewindebohrer und Schneideisen /

Mehr

DIN 338 N -geschliffen- Präzisionsausführung Weitere Abmessungen auf Anfrage. DIN 338 N -fully ground-, short, precision Other dimensions upon demand

DIN 338 N -geschliffen- Präzisionsausführung Weitere Abmessungen auf Anfrage. DIN 338 N -fully ground-, short, precision Other dimensions upon demand Spiralb hrer HSS 91201 IN 338 N -geschliffen- Präzisionsausführung Weitere bmessungen auf nfrage Twist drill HSS IN 338 N -fully ground-, short, precision Other dimensions upon demand rt.-nr. 303 001 020

Mehr

2.7 AUMENTO 15% SPIRALBOHRER GEWINDEBOHRER TWIST DRILLS TAPS +49 (0) KARNASCH PROFESSIONAL TOOLS INDUSTRIAL TOOLS DIVISION

2.7 AUMENTO 15% SPIRALBOHRER GEWINDEBOHRER TWIST DRILLS TAPS +49 (0) KARNASCH PROFESSIONAL TOOLS INDUSTRIAL TOOLS DIVISION MACHNES WWW.KARNASCH.TOOLS SPRALBOHRER GEWNDEBOHRER TWST DRLLS TAPS KONTAKT CONTACT KARNASCH PROFESSONAL TOOLS NDUSTRAL TOOLS DVSON Straße des Friedens 0 D- Tauche/OT Görsdorf mail@arnasch.tools + (0)

Mehr

4G Mill. 4G Mill FRÄSER CARBIDE. - High Speed Cutting for Pre-Hardened Steels up to HRc55. Being the best through innovation

4G Mill. 4G Mill FRÄSER CARBIDE. - High Speed Cutting for Pre-Hardened Steels up to HRc55. Being the best through innovation CABIDE Being the best through innovation G G FÄSE High Speed Cutting for PreHardened up to Hc HighSpeedBearbeitung (HSC) von vorvergüteten Stählen bis Hc SELECTION GUIDE ITEM MODEL DESCIPTION MIN SIZE

Mehr

Aufbohrer Kegelsenker. Core Drills Countersinks

Aufbohrer Kegelsenker. Core Drills Countersinks Aufbohrer Kegelsenker Core Drills Countersinks 633 634 Aufbohrer Kegelsenker Core Drills Countersinks Zeichenerklärung Key to symbols SCHEIDSTOFF / TOOL MATERIAL VHM VHM / Feinstkorn Solid carbide / Micro

Mehr

KOMPLETTE GEWINDESCHNEIDWERKZEUGE IN KUNSTSTOFFKASSETTEN COMPLETE ASSORTMENTS IN MOULDED BOXES

KOMPLETTE GEWINDESCHNEIDWERKZEUGE IN KUNSTSTOFFKASSETTEN COMPLETE ASSORTMENTS IN MOULDED BOXES IN KUNSTSTOFFKASSETTEN COMPLETE ASSORTMENTS IN MOULDED BOXES M 60 Metrisches ISO-Gewinde nach DIN 13 Metric ISO-thread acc. to DIN 13 Schneidmaße Dimensions M 3 - M 4 - M 5 - M 6 - M 8 - M 10 - M 12 TOPSELL

Mehr

Zahnformfräser. Fräser aus HSS/E

Zahnformfräser. Fräser aus HSS/E Zahnformfräser Modul Fräser-nuer 19535005 80 27 3,5 5 19535006 80 27 3,5 6 19535007 80 27 3,5 7 19535008 80 27 3,5 8 19537501 80 27 3,75 1 19537502 80 27 3,75 2 19537503 80 27 3,75 3 19537504 80 27 3,75

Mehr

7KUHDG &XWWLQJ *DXJHV. Gewindeschneiden/Lehren GEWINDESCHNEIDEN 7+5($' &877,1* LEHREN *$8*(6

7KUHDG &XWWLQJ *DXJHV. Gewindeschneiden/Lehren GEWINDESCHNEIDEN 7+5($' &877,1* LEHREN *$8*(6 7:44 Uhr Seite 1 dorle 2000S_E:HAHN Kat 2003 2.Auflage DE_GB:01 Seiten Kat 2003 2.Auflage: 7KUHDG &XWWLQJ *DXJHV 02.06.2006 Gewindeschneiden/Lehren Umschlag 2.Auflage.qxd GEWINDESCHNEIDEN 7+5($' &877,1*

Mehr

Qualitätswerkzeuge. Quality Tools. WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application. Kegelsenker 90 DIN 335 C

Qualitätswerkzeuge. Quality Tools. WAB Topline Werkzeuge für den professionellen Einsatz Tools for professional application. Kegelsenker 90 DIN 335 C Qualitätswerkzeuge Kegelsenker 90 DIN 335 C HSS, HSS-E, TiN-beschichtet Geschliffene Kegelsenker in absoluter Spitzenqualität zum grat- und ratterfreien Entgraten und Ansenken HSS Flachsenker DIN 373 HSS

Mehr

BaerCoil Gewindebohrer

BaerCoil Gewindebohrer BaerCoil Gewindebohrer www.baercoil.com BaerCoil Gewindebohrer BaerCoil Gewindebohrer unterscheiden sich in den Abmessungen von normalen Gewindebohrern. Damit der Drahtgewindeeinsatz aufgenommen werden

Mehr

Alu-POWER END MILLS. Alu-POWER FRÄSER SELECTION GUIDE. Alu-POWER END MILLS. für ALUMINIUM. 152~155 for ALUMINUM

Alu-POWER END MILLS. Alu-POWER FRÄSER SELECTION GUIDE. Alu-POWER END MILLS. für ALUMINIUM. 152~155 for ALUMINUM lu-powe EN S lu-powe EN S SELECTION GUIE EI CBIE, 2, HELIX for, IMON COTE V, 2 SCHNEIEN, ECHTSSPILE für LUMINIUM, IMNT-BESCHICHTETE 1 EG9 CBIE, 2, HELIX for, TiCN COTE V, 2 SCHNEIEN, ECHTSSPILE für LUMINIUM,

Mehr

ENTS ENTS ASSORTM ASSORTM ASSORTMENTS

ENTS ENTS ASSORTM ASSORTM ASSORTMENTS A S S O RT M E N TS The product category assortment contains tool sets, tool packaging and assortments for the Do it yourself section. The tool sets split up into groups for processing inner threads and

Mehr

-Special. HDS -Fräser. -Endmills. Increase in productivity at low tool cost thanks to newly developed tool material HARDAL SUPRA

-Special. HDS -Fräser. -Endmills. Increase in productivity at low tool cost thanks to newly developed tool material HARDAL SUPRA -Special SP102-1/2016-DE/GB HDS -Fräser -Endmills Die leistungsstarke Alternative zu konventionellen HSS- und VHM-Fräsern. The powerful alternative compared with conventional H.S.S.-and carbide endmills.

Mehr

PUNKTANBOHRER centering-pointer. HOCHLEISTUNGS-ANFASBOHRER chamfering drill

PUNKTANBOHRER centering-pointer. HOCHLEISTUNGS-ANFASBOHRER chamfering drill DRP DRA spinin PUNKTANBOHRER centering-pointer Code ØD0 L0 a ØQ r min -1 f mm r -1 f mm min -1 DRP 338 090 -B -C 3 38 90 DRP 338 120 -B -C 3 38 120 DRP 338 140 -B -C 3 38 140 0,04 0,04 0,04 7000-14000

Mehr

SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS

SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS 120 SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS SENKER / BLECHSCHÄLBOHRER / STUFENBOHRER COUNTERSINKS / SHEET METAL DRILLS / STEP DRILLS DIN DIN Qualität Quality

Mehr

SPIRALBOHRER UND FRÄSER TWIST DRILLS AND MILLING BITS

SPIRALBOHRER UND FRÄSER TWIST DRILLS AND MILLING BITS SPIRALBOHRER UND FRÄSER TWIST DRILLS AND MILLING BITS Spiralbohrer Typ N Twist Drills type N Produktinformation Ausführungen HSS-R Co EXACT EVENTUS 16 1-173 1-173 1-173 by EXACT 174 17-176 17-176 17-176

Mehr

Spiralo 48 TS TiN Spiralo 45 ZB TiN/VAP

Spiralo 48 TS TiN Spiralo 45 ZB TiN/VAP Spiralo 48 TS TiN Spiralo 45 ZB TiN/VAP M Metrisches ISO-Gewinde DIN 13 Baumaße DIN 371 / DIN 376 ISO Metric Threads, DIN 13 Dimensions DIN 371 / DIN 376 atalogue No. hamfer form hamfer length, threads

Mehr

7+5($',1* Á 7(&+12/2*<

7+5($',1* Á 7(&+12/2*< DO-01-04-08..DE.EN DC WI GmbH Graseggerstraße 125 DE-50737 Köln Tel. +49 221 995 532-0 Fax +49 221 995 532-10 E-Mail: info@dcswiss.de inox DC WI s.r.l. Via Canova 10 IT - 20017 Rho Tel. +39 02 669 40 41

Mehr

Hochleistungs-Spiralbohrer mit Innenkühlung und TiAlN Futura TOP Beschichtung zum Bohren bis zu 20xd und 30xd ohne Entspanen.

Hochleistungs-Spiralbohrer mit Innenkühlung und TiAlN Futura TOP Beschichtung zum Bohren bis zu 20xd und 30xd ohne Entspanen. RECORD TECHNISCHE DATEN / TECHNICAL DATA Baumaße/Dimensions: Ref. 034TT ILIX Norm (20xd) Ref. 03TT ILIX Norm (30xd) Schaftausführung/Shank: DIN 535 HA (Ref. 034TT/03TT) Schneidstoff/Cutting material: VHM

Mehr

Drehmoment-Einstellwerkzeuge Torque adjustment tools

Drehmoment-Einstellwerkzeuge Torque adjustment tools Drehmoment-Einstewerkzeuge Torque adjustment toos G-GE Für Schnewechse-Einsätze. Zum Einsteen und Überprüfen der Sicherheitskuppung For quick change adaptors to adjust and check the safety cutch. For Adaptors

Mehr