e x h i b i t i o n s y s t e m s s h o p f i t t i n g s y s t e m s

Größe: px
Ab Seite anzeigen:

Download "e x h i b i t i o n s y s t e m s s h o p f i t t i n g s y s t e m s"

Transkript

1 F L O O R F R E E D O M G U A R A N T E E D. B O D E N F R E I H E I T G A R A N T I E R T. e x h i b i t i o n s y s t e m s s h o p f i t t i n g s y s t e m s

2 F L O O R S Y S T E M S B O D E N S Y S T E M E. T HE INGENIOUS SYS TEM SOLUTION TO T H E CABLE JUNGLE ON STA NDS. D I E G E N I A L E S Y S T E M I D E E G E G E N K A B E L S A L AT A U F M E S S E S T Ä N D E N. A D V A N TA G E S Choice of suitable flooring height by use of two heights of adjustable feet Pedestal special heights are possible by adding the maxima light extrusion M 100 Levels uneven floors Feet can be adjusted after installation of floor panels Extremely fast installation Up to 30 KN/m uniformly distributed load bearing capacity Separately removable floor sections Choice of floor covering Illuminated skirtings for visual effect V O R T E I L E Gewünschte Bodenfreiheit durch zwei unterschiedlich hohe Verstellfüße Podestsonderhöhen sind möglich mit Hilfe des Maxima light Profils M 100 Nivelliert Bodenunebenheiten Verstellfüße nachträglich von oben höherjustierbar Extrem schnell zu verlegen Bis zu 30 KN/m Flächenlast Bodenplatten einzeln herausnehmbar Bodenbelag frei wählbar beleuchtbare Sockelblenden als optischer Abschluss

3 F L O O R S Y S T E M S B O D E N S Y S T E M E Sandwich panel Sandwichplatte EPL Beech chipboard on both sides with a mitred EPL.90 surrounding frame, waterproof gluing with cut-outs for flush bolt K 1 and holes for adjustable foot or HF 3 to indicate the corner foot, the corner is marked in red and has additional holes drilled lbs Beidseitig Buche Sperrholz mit umlaufenden Rahmen auf Gehrung, wasserfest verleimt mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3 die Ecke für den Eck-Hebefuß ist rot markiert und mit zusätzlicher Bohrung versehen 11,8 kg EPL K 1 Sandwich panel Sandwichplatte EPL Beech chipboard on both sides with a mitred EPL 4.90 surrounding frame, waterproof gluing with cut-outs for flush bolt K 1 and holes for adjustable foot or HF 3 to indicate the corner feet, the corners are marked in red and have additional holes drilled lbs Beidseitig Buche Sperrholz mit umlaufenden Rahmen auf Gehrung, wasserfest verleimt mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3 die Ecken für den Eck-Hebefuß sind rot markiert und mit zusätzlichen Bohrungen versehen 7,9 kg Sandwich panel Sandwichplatte Beech chipboard on both sides with a mitred.90 surrounding frame, waterproof gluing with cut-outs for flush bolt K 1 and holes for adjustable foot or HF 3 to indicate the corner feet, the corners are marked in red and have additional holes drilled lbs Beidseitig Buche Sperrholz umlaufenden Rahmen auf Gehrung, wasserfest verleimt mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3 die Ecken für den Eck-Hebefuß sind rot markiert und mit zusätzlichen Bohrungen versehen 5,3 kg K 1 EPL Sandwich panel Sandwichplatte EPL Beech chipboard on both sides with a mitred EPL 7.90 surrounding frame, waterproof gluing with cut-outs for flush bolt K 1 and holes for adjustable foot or HF 3 to indicate the corner foot, the corner is marked in red and has additional holes drilled lbs Beidseitig Buche Sperrholz mit umlaufenden Rahmen auf Gehrung, wasserfest verleimt mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3 die Ecke für den Eck-Hebefuß ist rot markiert und mit zusätzlicher Bohrung versehen 6,6 kg OCTANORM

4 F L O O R S Y S T E M S. B O D E N S Y S T E M E Sandwich panel Sandwichplatte EPL Beech chipboard on both sides with a mitred EPL 8.90 surrounding frame, waterproof gluing with cut-outs for flush bolt K 1 and holes for adjustable foot or HF 3 to indicate the corner feet, the corners are marked in red and have additional holes drilled lbs Beidseitig Buche Sperrholz mit umlaufenden Rahmen auf Gehrung, wasserfest verleimt mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3 die Ecken für den Eck-Hebefuß sind rot markiert und mit zusätzlichen Bohrungen versehen 4,6 kg Sandwich panel Sandwichplatte EPL Beech chipboard on both sides with a mitred EPL 9.90 surrounding frame, waterproof gluing with cut-outs for flush bolt K 1 and holes for adjustable foot or HF 3 to indicate the corner foot, the corner is marked in red and has additional holes drilled 7.77 lbs Beidseitig Buche Sperrholz mit umlaufender Rahmen auf Gehrung, wasserfest verleimt mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3 die Ecke für den Eck-Hebefuß ist rot markiert und mit zusätzlicher Bohrung versehen 3,3 kg EPL 9 Heavy load panel Schwerlastplatte SPL layers of plywood with cut-outs for flush bolt SPL 3.90 K 1 and holes for adjustable foot or HF 3, ø 90 mm hole in the middle, can be covered with U 1 to indicate the corner foot, the corner is marked in red and has additional holes drilled lbs Tischlerplatte, 3-lagig verleimt, mit Aussparungen für Kantenriegel K1 und Bohrungen für Hebelfuß Hf 1 oder HF 3, mittige Aussparung ø 90 mm abdeckbar mit U 1 die Ecke für den Eck-Hebefuß ist rot markiert und mit zusätzlicher Bohrung versehen 19,4 kg Cover plate Unterlagscheibe U aluminium as base plate to obtain higher point load and to U 1.00 cover the cut-out in SPL 3 load capacity lbs 0.13 lbs Aluminium als Unterlage zur Erzielung höherer Punktbelastung und zur Abdeckung der Aussparung in SPL 3 Belastung 500 kg 0,060 kg

5 F L O O R S Y S T E M S B O D E N S Y S T E M E + Platte Adjustable foot Hebefuß Zinc die cast with upper retainer pins.00 adjustable from top load capacity 4410 lbs lbs Zinkdruckguss mit oberen Haltedornen von oben verstellbar Belastung 000 kg 0,814 kg Platte Adjustable foot Hebefuß HF Zinc die cast without upper retainer pins for HF.00 additional support of extremely high point loads in the lateral areas of the floor panels, adjustable from top load capacity 4410 lbs lbs Zinkdruckguss ohne oberen Haltedornen zur zusätzlichen Unterstützung für extreme Punktlasten im Randbereich der Bodenplatten von oben verstellbar Belastung 000 kg 0,85 kg + Platte Adjustable foot Hebefuß HF 3 left links Zinc die cast with upper retainer pins HF 3.00 adjustable from top load capacity 4410 lbs.161 lbs Zinkdruckguss mit oberen Haltedornen von oben verstellbar Belastung 000 kg 0,980 kg HF Platte Adjustable foot Hebefuß HF 4 Zinc die cast without upper retainer pins for HF 4.00 additional support of extremely high point loads in the lateral areas of the floor panels, adjustable from top load capacity 4410 lbs.161 lbs Zinkdruckguss ohne oberen Haltedornen zur zusätzlichen Unterstützung für extreme Punktlasten im Randbereich der Bodenplatten von oben verstellbar Belastung 000 kg 0,980 kg HF 3 EPL W HF 4 HF Platte Adjustable foot Hebefuß HF 5 Steel HF 5.37 additional foot for extremely high point load load capacity 4410 lbs lbs Stahl zusätzlicher Unterstellfuß für extreme Punktlasten Belastung 000 kg 0,346 kg U 1 HF 5 SPL 3 80

6 F L O O R S Y S T E M S B O D E N S Y S T E M E Flush bolt Kantenriegel K 1 K steel K 1.37 to interlock floor panels for transmission of lateral loads 0.3 lbs Stahl zum Verriegeln von Bodenplatten zur Übertragung der Randlasten 0,154 kg Base angle Sockelwinkel SO aluminium SO every 500 mm countersunk holes for wood screws, ø 4 mm, terminating element of floor construction and fixing for skirting rail SOB 00/ mm long lbs Aluminium alle 500 mm gebohrt und versenkt für Holzschrauben. ø 4 mm, Abschluss der Bodenanlage und Befestigung von Sockelblende SOB 00/ mm lang,465 kg 45 Miter base angle Sockelwinkel SO 154/L aluminium same as SO 500, with 4 holes drilled 45 miter cut on the left side 15 mm long lbs Aluminium wie SO 500, mit 4 Bohrungen Gehrung auf 45 links 15 mm lang 0,800 kg SO 154/L Miter base angle Sockelwinkel SO 154/R aluminium same as SO 500, with 4 holes drilled 45 miter cut on the right side 15 mm long lbs Aluminium wie SO 500, mit 4 Bohrungen Gehrung auf 45 rechts 15 mm lang 0,800 kg SO 154/R.11 Skirting rail Sockelblende SOB 00/ hardboard SOB 00/9.33 black plastic vinyl on both sides for lateral covering of floor constructions in combination with SO mm long lbs Hartfaserplatte beidseitig schwarze Kunststofffolie zur seitlichen Verkleidung von Doppelboden-Anlagen in Verbindung mit SO mm lang 0,616 kg

7 D E T A I L E D V I E W S D E T A I L A N S I C H T E N

8 P E D E S TA L C O N S T R U C T I O N I N S TA I R S H A P E. P O D E S T B A U W E I S E E M I T H Ö H E N A B S T U F U N G. + HF 3 V + EPL + HF 3 + V min max min max. HF 3 HF 3

9 P E D E S TA L - S P E C I A L H E I G H T S. P O D E S T - S O N D E R H Ö H E N. P E D E S TA L S O L U T I O N F O R C A R S. P O D E S T - V E R S I O N F Ü R P K W. ø 16 L 80 H H = mm L = 55 mm H = mm L = 105 mm H = mm L = 155 mm H = mm L = 05 mm H = mm L = 55 mm 80 HF Z 300/65,5 mm

10 F L O O R S Y S T E M S B O D E N S Y S T E M E L O A D C H A R A C T E R I S T I C S ( L O A D V A L U E S ). B E L A S T U N G S W E R T E ( M AT E R I A L B E L A S T U N G E N ). ORDER NO. BEST.-NR. MEASUREMENTS (INCH) MAßE (MM) LOAD (LB) GEWICHT (KG) 1 POINT LOAD (LB) POINT LOAD (LB) DISTRIB. LOAD (LB) 1 3 PUNKTLAST (KG) PUNKTLAST (KG) FLÄCHENLASTLAST (KG) 3 EPL 39.9 x 39.9 x inch EPL 998 x 998 x mm EPL x 9.44 x inch EPL x 748 x mm 39.9 x x inch 998 x 498 x mm EPL x 9.44 x inch EPL x 748 x mm EPL x x inch EPL x 498 x mm EPL x x inch EPL x 498 x mm SPL x 39.9 x inch SPL x 998 x mm , , , , , , , with glide or the like approx. dia inch with washer U1 dia inch mit Möbelfuß o.ä. ca. ø 5 mm mit Unterlegscheibe U1 ø 100 mm 3 3 dead load per m verteilte ruhende Last auf 1 m The load characteristics have been determined by extensive laborytory testing. The above-mentioned values refer to the individual panels, deflections not considered. If used for car exhibition the components must in all cases be combined with heavy load panels SPL 3 and additional feet HF 5 in the area of the wheels so as to avoid an intolerable deflection of the panels. Die angegebenen Belastungswerte sind durch umfangreiche Prüfergebnisse der Material-Prüfungsanstalt abgesichert. Die vorgenannten Werte beziehen sich auf die einzelne Platte. Durchbiegungen sind nicht berücksichtigt. Bei Einsatz der Bauteile für Kfz-Ausstellungen sind in jedem Fall Schwerlastplatten SPL 3 und zusätzliche Unterstellfüße HF 5 im Bereich der Räder zur Vermeidung von untolerierbaren Durchbiegungen der Platten einzusetzen.

11 F L O O R S Y S T E M S B O D E N S Y S T E M E C A L C U L AT I O N F O R M U L A S. B E R E C H N U N G S F O R M E L N. F O R M U L A F O R T H E C A L C U L AT I O N O F A D J U S TA B L E F E E T F O R M E L Z U R E R R E C H N U N G D E R A N Z A H L V O N H E B E F Ü ß E N number of panels in the width + 1 x number of panels in the depth + 1 = number of adjustable feet Example: exhibit area 1 panels wide, 6 panels deep x = 13 x 7 = 91 adjustable feet. Anzahl der Platten in der Breite + 1 x Anzahl der Platten in der Tiefe + 1 = Anzahl der Hebefüße Beispiel: Standfläche 1 Platten breit, 6 Platten tief x = 13 x 7 = 91 Hebefüße. F O R M U L A F O R T H E C A L C U L AT I O N O F F L U S H B O LT S F O R P A N E L S W I T H A M I N I M U M E D G E L E N G H T O F M M F O R M E L Z U R E R R E C H N U N G D E R A N Z A H L V O N K A N T E N R I E G E L B E I P L AT T E N M I T M I N D E S T E N S M M K A N T E N L Ä N G E number of panels in the width x number of panels in the depth x - number of panels in the width - number of panels in the depth = number of flush bolts Example: exhibit area 1 panels wide, 6 panels deep. 1 x 6 x = = 16 flush bolts. Anzahl der Platten in der Breite x Anzahl der Platten in der Tiefe x - Anzahl der Platten in der Breite - Anzahl der Platten in der Tiefe = Anzahl der Kantenriegel Beispiel: Standfläche 1 Platten breit, 6 Platten tief. 1 x 6 x = = 16 Kantenriegel.

12 F L O O R S Y S T E M S. B O D E N S Y S T E M E. AW /005 e x h i b i t i o n s y s t e m s s h o p f i t t i n g s y s t e m s c l e a n r o o m s y s t e m s s o f t w a r e a n d s e r v i c e p r e s e n t a t i o n s y s t e m s D O U B L E F L O O R D O P P E L B O D E N R A I S E D F L O O R L I F T B O D E N S T R U K T U R S T R U K T U R w w w. o c t a n o r m. c o m

FLOOR SYSTEMS BODENSYSTEME

FLOOR SYSTEMS BODENSYSTEME FLOOR SYSTEMS BODENSYSTEME DOUBLE FLOOR SYSTEM DOPPELBODENSYSTEM F L O O R S Y S T E M B O D E N S Y S T E M 6-7 A D J U S T A B L E F E E T H E B E F Ü S S E 8-8 B A S E A N G L E S S O C K E L W I N

Mehr

Series MS desktop enclosure. Serie MS Tischgehäuse GEHÄUSE KATALOG

Series MS desktop enclosure. Serie MS Tischgehäuse GEHÄUSE KATALOG GEHÄUSE KATALOG Serie MS Tischgehäuse Series MS desktop enclosure Verfügbar in 76 Größen. Verdeckte Verschraubung. Mit zusätzlichen Winkeln auch als 9-Zoll-Einschub geeignet. Folgende Gehäusegrößen sind

Mehr

HS25/50. Elektronische Trefferanzeigen Electronic scoring systems. Scheibe Target. Montage Scheibenhalter (Ständer) Mounting of target holders (stand)

HS25/50. Elektronische Trefferanzeigen Electronic scoring systems. Scheibe Target. Montage Scheibenhalter (Ständer) Mounting of target holders (stand) B-INSTA_HS/0_SHSTargetHolder_de/en 0/ SIUS AG Im Langhag CH-0 Effretikon Switzerland Elektronische Trefferanzeigen Electronic scoring systems Scheibe Target HS/0 Montage Scheibenhalter (Ständer) Mounting

Mehr

Anwendungen Application examples

Anwendungen Application examples MS Serie MS Tischgehäuse series MS desktop enclosure Verfügbar in 176 Größen, Verdeckte Verschraubung, Mit zusätzlichen Winkeln auch als 19-Zoll-Einschub geeignet, Folgende Gehäusegrößen sind ohne Lüftungsschlitze

Mehr

Katalog. Catalog. Februar February 2014

Katalog. Catalog. Februar February 2014 Katalog Februar 2014 Catalog February 2014 SpeedDimension GmbH Gretlade 5 31319 Höver, Germany Tel. +49(0)5132 / 86 87-15 Fax +49(0)5132 / 86 87-44 info@ speeddimension.com www. speeddimension.com Beispiel

Mehr

Kontrollgehäuse Serie FC FC series control box Eigenschaften Features Anwendungsbeispiele application examples

Kontrollgehäuse Serie FC FC series control box Eigenschaften Features Anwendungsbeispiele application examples FC Kontrollgehäuse Serie FC FC series control box Eigenschaften Verfügbar in 175 Varianten. Universell einsetzbares Gehäuse, bestehend aus Aluminiumprofi l-rahmen, ABS-Eckverbindungen und Aluminiumplatten.

Mehr

- Bodenwinkel (fest und verstellbar). - Stellfüße. - Stellfuß Anti-Rutsch Einsätze. - Hub - Stellfuß - Lenkrollen, Bockrollen, Doppelrollen.

- Bodenwinkel (fest und verstellbar). - Stellfüße. - Stellfuß Anti-Rutsch Einsätze. - Hub - Stellfuß - Lenkrollen, Bockrollen, Doppelrollen. 4.0 Bodenelemente Base elements - Bodenwinkel (fest und verstellbar). - Stellfüße. - Stellfuß Anti-Rutsch Einsätze. - Hub - Stellfuß - Lenkrollen, Bockrollen, Doppelrollen. - base bracket - feet. - anti

Mehr

MEDIA STELE. DESIGN: WOLFGANG C. R. MEZGER. media stele

MEDIA STELE. DESIGN: WOLFGANG C. R. MEZGER. media stele MEDIA STELE. DESIGN: WOLFGANG C. R. MEZGER. Function Dimensions Media Stele: casegood carcass with suspended monitors in various sizes. Available in widths of 60 cm, 80 cm and 130 cm. Floorstanding Stele

Mehr

19 Network Cabinet Modular, Unequipped Frame for modular upgrading or use as open rack

19 Network Cabinet Modular, Unequipped Frame for modular upgrading or use as open rack 19 Network Cabinet Modular, Unequipped Frame for modular upgrading or use as open rack page 1 of 6 Art.-No. 692515U.. 692447U unequipped basic frame for modular upgrading depth-adjustable 19 profiles with

Mehr

Classic 9 Elegant C-Profil- Röhrenlaufwerke

Classic 9 Elegant C-Profil- Röhrenlaufwerke Classic 9 Elegant C-Profil- Röhrenlaufwerke 57 Inhaltsverzeichnis Classic 9 Elegant - C-Profil- Röhrenlaufwerke Laufschienen, Rollapparate, Anschraubplatten S. 58-59 Glasklemmhalter, Stopper, Muffen S.

Mehr

EXTRUSIONS PROFILE. Aluminium case angle 20 x 20 mm. Aluminium-Kantenschutz 20 x 20 mm. Aluminium case angle 35 x 35 mm.

EXTRUSIONS PROFILE. Aluminium case angle 20 x 20 mm. Aluminium-Kantenschutz 20 x 20 mm. Aluminium case angle 35 x 35 mm. 42 35 35 Aluminium case angle x mm. 69 Aluminium-Kantenschutz x mm. 6111 Aluminium case angle 35 x 35 mm. 1,5 mm 60 g/m Aluminium-Kantenschutz 35 x 35 mm. 2,0 mm 340 g/m 33 69 Aluminium case angle x mm.

Mehr

Sockelfuß»Concept«plinth foot»concept«

Sockelfuß»Concept«plinth foot»concept« 11/2017 Notizen note Sockelfuß»Concept«plinth foot»concept«73.3000 73.3001 73.3003 15.7840 05.7630 05.7640 72.1153 72.1155 64 64 Sockelfuß»Concept«plinth foot»concept«79 verdeckter Verstellbereich von

Mehr

Geländerteile aus Gusseisen für seitliche Montage

Geländerteile aus Gusseisen für seitliche Montage Geländerteile aus Gusseisen für seitliche Montage CAST-IRON ELEMENT FOR RAILING Suitable for installation on staircases, balconies and railings with side joint. Diese Elemente sind für seitliche Montage

Mehr

Eckbeschläge Patch fittings. Zubehör Accessories

Eckbeschläge Patch fittings. Zubehör Accessories Eckbeschläge Patch fittings Zubehör Klemmbeschläge Wichtiger Hinweis: Für freihängende Gläser bitte Sicherheits-Klemmbeschläge verwenden. Anzugsmomente der Befestigungsschrauben 15 Nm (M 6=sw 5), pro Klemmbeschlag

Mehr

Schritt für Schritt Step by Step. ALCO-Albert GmbH & Co. KG Tel +49 2932 97480 mail@alco-albert.de www.alco-albert.de 55

Schritt für Schritt Step by Step. ALCO-Albert GmbH & Co. KG Tel +49 2932 97480 mail@alco-albert.de www.alco-albert.de 55 ALCO-Albert GmbH & Co. KG Tel +49 2932 97480 mail@alco-albert.de www.alco-albert.de 55 Schritt für Schritt Step by Step 884 Fußstütze Tritty, starker Stahlrohrrahmen, glanzvernickelt, mit standsicheren

Mehr

FR777 Differenzial-Kulissenauszug Bodenmontage, 200 kg Tragkraft, mit Gegenführung

FR777 Differenzial-Kulissenauszug Bodenmontage, 200 kg Tragkraft, mit Gegenführung http://www.fulterer.com http://www.fultererusa.com Instructions F777 Differenzial-Kulissenauszug Bodenmontage, 00 kg Tragkraft, mit Gegenführung F777 Progressive-Action Pantry Pull-out, Bottom Mount 450

Mehr

DZDAFR-20 Accuride Teleskopschiene Hängerahmen, für Größe DIN A4

DZDAFR-20 Accuride Teleskopschiene Hängerahmen, für Größe DIN A4 DZDAFR-20 Accuride Teleskopschiene Hängerahmen, für Größe DIN A4 www.leschhorn.de Filing frame Cadre pour dossiers suspendus Hängerahmen DIN A4 size Optional anti-tilt and lock (right 16mm hand side) Installation

Mehr

Schüco-Rollentürbänder Schüco barrel hinges

Schüco-Rollentürbänder Schüco barrel hinges Schüco-Rollentürbänder Schüco barrel hinges Schlank, elegant, vollkommen verdeckt - gel auszuhängen Funktion und Technik / HD - mm Funktion und Technik / HD - mm Function and technology adjustable without

Mehr

PRADERA Design: Ronald Straubel. KOKO Design: Tomasz Augustyniak. VANCOUVER, SEATTLE Design: PDT

PRADERA Design: Ronald Straubel. KOKO Design: Tomasz Augustyniak. VANCOUVER, SEATTLE Design: PDT PRADERA Design: Ronald Straubel KOKO Design: Tomasz Augustyniak VANCOUVER, SEATTLE Design: PDT 3 SEATTLE 10 CHROME SEATTLE 10 CHROME SEATTLE 10 CHROME 4 SEATTLE 10 CHROME SEATTLE 20 CHROME SEATTLE 25 CHROME

Mehr

rear view server cabinet perforated steel door, divided

rear view server cabinet perforated steel door, divided 19 Server Cabinet Standard Page 1 of 5 Art.-No. 693126.60P1P2.. 693147.82P2 depth rail + traverse for high max. load front view server cabinet perforated steel door, one-part rear view server cabinet perforated

Mehr

PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module

PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module LSS PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module The LSS PROFIBUS-DP repeaters 1 to 1 and 1 to 5 are used for coupling up to six PROFIBUS bus segments in RS 485 bus technology.

Mehr

Hauptkatalog / main catalog

Hauptkatalog / main catalog 2018 Hauptkatalog / main catalog ohne Mwst. / without VAT Muldenstraße 2, D - 08280 Aue Tel.: +49 (0) 3771-2868 - 0 / Fax -13 +49 (0) 3771-2868 - 0 / Fax -13 Seite/ page Inhaltsverzeichnis/ INDEX Form/

Mehr

max. Flügelgewicht: 140 kg max. Flügelgewicht: 200 kg max. Flügelbreite: mm max. Flügelbreite: mm

max. Flügelgewicht: 140 kg max. Flügelgewicht: 200 kg max. Flügelbreite: mm max. Flügelbreite: mm JUMBO Allgemeine und technische Hinweise: JUMBO - Universalbeschläge haben ihren besonderen Einsatzbereich bei stärkeren Glasdicken und großen Flügelabmessungen gefunden. Dieser Beschlag ist geeignet für

Mehr

Marine Blöcke im Vertrieb bei Pfeiffer Marine I Blocks

Marine Blöcke im Vertrieb bei Pfeiffer Marine I Blocks Marine Blöcke im Vertrieb bei Pfeiffer Marine I Blocks HYE Yachtblöcke sind seit Jahren ein Begriff für höchste Qualität bei einem optimalen Preis-Leistungsverhältnis. Die Formgebung ist zweckmäßig und

Mehr

Seitenkoffer Topcases Gepäckträger Lock it System Softbags Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer Chopper-Parts Quad-Parts Accessoires

Seitenkoffer Topcases Gepäckträger Lock it System Softbags Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer Chopper-Parts Quad-Parts Accessoires Gepäckbrücke Alurack Artikel-Nr.: 650.779 01 01 schwarz Artikel-Nr.: 650.7500 01 01 schwarz Montage Seitenkoffer Topcases Gepäckträger Lock it System Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer

Mehr

Foldaway Systems. Kitchen and Bath Organization. Call from anywhere in the US - Bio-Fix products from Häfele.

Foldaway Systems. Kitchen and Bath Organization. Call from anywhere in the US -  Bio-Fix products from Häfele. Kitchen and Bath Organization Foldaway Systems Latch locks in down as well as up position Prevents shelf from banging against the lower cabinet door from the inside when closed Cabinet widths of 300 mm

Mehr

Angebotsaufforderung. Ausschreibungstexte Lehnen Funktion T

Angebotsaufforderung. Ausschreibungstexte Lehnen Funktion T Angebotsaufforderung Funktion T300 03.08.2012 Auftraggeber: Lehnen GmbH Seite: 2 von 8 *** Hinweistext Bathroom series T-300 07. Products with load-bearing capacity till max. 300 kg 07..001. 1,000 Stk......

Mehr

furniture legs and furniture bases möbelfüße und möbeluntergestelle

furniture legs and furniture bases möbelfüße und möbeluntergestelle furniture legs and furniture bases möbelfüße und möbeluntergestelle 73 Furniture legs Möbelfüße 80/100* 80/100* Drawing scale: 1:2 Abb. Maßstab: 1:2 100 80/100* 80/100* 50 * It refers to the leg N60x60

Mehr

series COF combiflex Serie COF combiflex COF Combiflex Die Combiflex-Gehäuse bestehen aus 2 U-Profil-Strangpressprofilen,

series COF combiflex Serie COF combiflex COF Combiflex Die Combiflex-Gehäuse bestehen aus 2 U-Profil-Strangpressprofilen, COF Serie COF combiflex series COF combiflex COF Combiflex Die Combiflex-Gehäuse bestehen aus 2 U-Profil-Strangpressprofilen, die sich beliebig miteinander kombinieren lassen, und zwei Abschlussdeckeln,

Mehr

Zehnder ComfoWell 220

Zehnder ComfoWell 220 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for

Mehr

WICSTYLE. Technische Information Technical information. Einbauanleitung Rollenband Installation guide butt hinge

WICSTYLE. Technische Information Technical information. Einbauanleitung Rollenband Installation guide butt hinge Einzelteile Lieferumfang / Individual parts scope of supply Montage des Türbands / Installation of the hinge Zweiteilig Two-piece 1. Flügelbandteil Hinge blade for door 2. Lagerbolzen Bearing pin 3. Rahmenbandteil

Mehr

Zehnder CLD. Housing for walls, floors and ceilings

Zehnder CLD. Housing for walls, floors and ceilings Benefits Suitable for wall, floor or ceiling installation Air volumes up to a maximum of 30 m 2 /h (ComfoTube 75) and 45 m 2 /h (ComfoTube 90) Can be installed in timber or solid constructions Extract

Mehr

Qualitätsmanagement-Handbuch Serviceinformation: _Serviceinformation H0201_1_Batterietrennschalter.doc Formblatt. ÜS;Linearlifte AL1

Qualitätsmanagement-Handbuch Serviceinformation: _Serviceinformation H0201_1_Batterietrennschalter.doc Formblatt. ÜS;Linearlifte AL1 Serviceinformation Thema Batterietrennschalter 200185065 kann brechen Seite:1/7 Produktgruppe ÜS;Linearlifte AL1 Artikelnummer Produktgruppencode H0201 Servicecode 200185065 H0201 K0012 A0001 Verfasser

Mehr

Telefon: +49 (0) 5251 / Telefax: +49 (0) 5251 /

Telefon: +49 (0) 5251 / Telefax: +49 (0) 5251 / 1 / 9 Assembly: Assembly plate: The left and right assembly plates are screwed onto the side of the vehicle frame via the designated bore holes. The following items shall be used per side for this purpose:

Mehr

Snap-in switch for switches PSE, MSM and MCS 30

Snap-in switch for switches PSE, MSM and MCS 30 Product manual Snap-in switch for switches PSE, MSM and MCS 30 CONTENTS 1. PRODUCT DESCRIPTION 2. DATA AND DIMENSIONAL DRAWINGS 2.1. Technical Data 2.2. Dimensions of PSE with a Mounting Diameter 19 mm

Mehr

19 Network Cabinet Standard with Rear Door in Full Cabinet Height. depth-adjustable 19 profiles with numbering of rack units

19 Network Cabinet Standard with Rear Door in Full Cabinet Height. depth-adjustable 19 profiles with numbering of rack units depth-adjustable 19 profiles with numbering of rack units rear door in full height with 2-point latch locking Common Specifications 19 network cabinet according to DIN41494 Steel sheet housing with welded

Mehr

GEHÄUSE KATALOG. COF Combiflex Die Combiflex-Gehäuse bestehen aus 2 Strangpressprofilen,

GEHÄUSE KATALOG. COF Combiflex Die Combiflex-Gehäuse bestehen aus 2 Strangpressprofilen, 4 - Combiflex COF Combiflex Die Combiflex-Gehäuse bestehen aus 2 Strangpressprofilen, die sich beliebig miteinander kombinieren lassen, und zwei Abschlussdeckeln, die mit vier M3 Schrauben mit den Profilen

Mehr

modular case series MGS-superior Gehäuse Serie MGS-superior GEHÄUSE KATALOG

modular case series MGS-superior Gehäuse Serie MGS-superior GEHÄUSE KATALOG Gehäuse Serie Die flexible Gehäuseserie als 9-Zoll- Volleinschub oder Desktop-Ausführung. modular case series The flexible case series as a 9-inch plug-in box or desktop version. Diese neu entwickelte

Mehr

Rev. Proc Information

Rev. Proc Information Rev. Proc. 2006-32 Information 2006, CPAs 1 Table 1-Total loss of the home Table 2- Near total loss is water to the roofline. Completely gut the home from floor to rafters - wiring, plumbing, electrical

Mehr

Ambos - Lift 700. Lift 700. The upward return mechanism is controlled by the hydraulic device that works with a specially formulated fiuld.

Ambos - Lift 700. Lift 700. The upward return mechanism is controlled by the hydraulic device that works with a specially formulated fiuld. Ambos - Lift 700 The upward return mechanism is controlled by the hydraulic device that works with a specially formulated fiuld. Materials and finishes Installation Load Capacity Plastic parts : Black

Mehr

Verlegeanleitung Skyline- Schindeln

Verlegeanleitung Skyline- Schindeln Holzschalung und Vordeckbahn: Verlegeanleitung Skyline- Schindeln Holzkonstruktion mit Dachpappe als Schutzlage unter den Schindeln Anfangsgebinde: - Bereiten Sie das Startgebinde vor, indem Sie die Schindelzungen

Mehr

Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN

Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN Maschinen-Spindelköpfe nach DIN Machine Spindle Noses to DIN DIN 800, mit Gewinde DIN 800, with thread A Tol. mittel A Mean tol. Bg5 Bg5 C Kleinstmaß C Minimum D E F D E F M20 21 30 6,3 10 20 M24 25 36

Mehr

Seitenkoffer Topcases Gepäckträger Lock it System Softbags Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer Chopper-Parts Quad-Parts Accessoires

Seitenkoffer Topcases Gepäckträger Lock it System Softbags Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer Chopper-Parts Quad-Parts Accessoires Gepäckbrücke Alurack Artikel-Nr.: 650.779 01 01 schwarz Artikel-Nr.: 650.7500 01 01 schwarz Montage Der Bausatz umfaßt die folgenden Teile: Stück Bestellnr. Bezeichnung Seitenkoffer Topcases Gepäckträger

Mehr

Aufbewahrung Labor- und Messleitungswagen

Aufbewahrung Labor- und Messleitungswagen Grundgestell- / Basiswagen bestehend aus Rahmenprofilen, Bodenplatte (maximale Tragkraft: 30 kg), antistatischen Rollen (2 feststellbar) und: 1 Ablageplatte, 520 x 165 mm, mit Kabelschlitzen, auf Zwischenstreben,

Mehr

Feststell-Rollen kg

Feststell-Rollen kg R 74 Feststell-Rollen 40 800 kg Höhenverstellbare und rollbare Maschinen-Stützfüße! FSR/600/1 FSR/600/3 FSR/RF/600/3 Maschinen-Transportfahrzeuge und Hebegeräte finden Sie ab der Katalog-Seite T 32. Räder:

Mehr

Quadt Kunststoffapparatebau GmbH

Quadt Kunststoffapparatebau GmbH Quadt Kunststoffapparatebau GmbH Industriestraße 4-6 D-53842 Troisdorf/Germany Tel.: +49(0)2241-95125-0 Fax.: +49(0)2241-95125-17 email: info@quadt-kunststoff.de Web: www.quadt-kunststoff.de Page 1 1.

Mehr

Bodengitter Typ BG. Floor grille type BG

Bodengitter Typ BG. Floor grille type BG Bodengitter Typ BG esco (Schweiz) AG Walderstrasse 12 C - 86 Rüti / Z Telefon 0 / 20 71 11 Telefax 0 / 20 73 10 http://www.hesco.ch hesco@hesco.ch esco-bodengitter aus Aluminium sind formschöne, begehbare

Mehr

Sechs Grundansichten (Six Principal Views):

Sechs Grundansichten (Six Principal Views): Sechs Grundansichten (Six Principal Views): Projektionsmethode E bzw. 1 (First Angle Projection) Projektionsmethode A bzw. 3 (3 rd Angle Projection) 1 Vorderansicht (Front view) 2 Ansicht von oben (Top

Mehr

Lichtstative. 231 Showtec

Lichtstative. 231 Showtec Lichtstative 231 Showtec Two-Stands with truss Light & Show Showtec Two Stand with Truss ORDERCODE 70108 3 m. Showtec Extra truss part ORDERCODE 70130 1,5 m. Max. load: 50 kg 25 kg Showtec Two Stand with

Mehr

1596 Gratfräser HW HW Z2 Dovetail Cutter TC

1596 Gratfräser HW HW Z2 Dovetail Cutter TC 96 Gratfräser HW HW Z2 Dovetail Cutter TC Zweischneidiger Gratfräser ohne Vorschneider zum einfachen Erstellen von Gratverbindungen. Art.-Nr. 960 und 962 sind mit Vollhartmetall-Einsatz. Two flute dovetail

Mehr

FOX-150/E... FOX-350/E Solar Laderegler

FOX-150/E... FOX-350/E Solar Laderegler FOX-150/E... FOX-350/E Solar Laderegler Solar Charge Regulator Einbauanleitung mounting guidelines Einbauanleitung Diese Anleitung ist eine Ergänzung zu folgenden Installationsanleitungen: D "FOX-150

Mehr

Distanzmontageteilen. Distance rolls

Distanzmontageteilen. Distance rolls Distanzmontageteile Distance rolls Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical

Mehr

Montageanleitung der REMUS Klappensteuerung Installation instruction for the REMUS valve control unit

Montageanleitung der REMUS Klappensteuerung Installation instruction for the REMUS valve control unit Nicht für den öffentlichen Straßenverkehr zugelassen! Not approved for usage on public roads! Verpackungsinhalt / Packing contents REMUS Steuereinheit REMUS control module REMUS Funkfernbedienung REMUS

Mehr

Schüco ASS 70 FD. Falt-Schiebesysteme Folding sliding systems. Das gedämmte Falt-Schiebesystem

Schüco ASS 70 FD. Falt-Schiebesysteme Folding sliding systems. Das gedämmte Falt-Schiebesystem Falt-Schiebesysteme Folding sliding systems Schüco 131 Schüco ASS 70 FD Das gedämmte Falt-Schiebesystem mit geringen Ansichtsbreiten ist ideal eingesetzt, wo im geschlossenen Zustand perfekte Dichtheit

Mehr

Poster Stands. Plakatständer

Poster Stands. Plakatständer Stands 09 Stnads Classic Stand Semi Klassiker Semi * Free standing display * Mitred & Round corners available * 25 mm or 32mm profiles available * 25x52 mm elliptical body profile * Optional acrylic shelves

Mehr

LIMES. 1 Bank, Eiche furniert bench, oak veneer. 2 Tisch, Eiche furniert table, oak veneer

LIMES. 1 Bank, Eiche furniert bench, oak veneer. 2 Tisch, Eiche furniert table, oak veneer limes LIMES 1 Bank, Eiche furniert bench, oak veneer 2 Tisch, Eiche furniert table, oak veneer Design: kim kim design 1 2 limes Limes kennzeichnet eine Reihe von Brückentischen und Bänken in zeitloser

Mehr

TriASS Schreibtische. TriASS Schreibtischsystem Montageanleitung. TriASS Desking System Assembly Instructions. Das Assmann Prinzip. Gute Arbeit.

TriASS Schreibtische. TriASS Schreibtischsystem Montageanleitung. TriASS Desking System Assembly Instructions. Das Assmann Prinzip. Gute Arbeit. Das Assmann Prinzip. Gute Arbeit. TriASS Schreibtischsystem Montageanleitung TriASS Desking System Assembly Instructions The Assmann principle. Designed to work well. TriASS Desks Schreibtisch, Typ ST16

Mehr

FEATURES APPLICATIONS. Technical data sheet ABR - REINFORCED ANGLE BRACKETS

FEATURES APPLICATIONS. Technical data sheet ABR - REINFORCED ANGLE BRACKETS Reinforced angle brackets are suitable for structural applications in frag and wood-frame houses. FEATURES ETA-060106, UK-DoP-e060106 Material Galvanized steel S250GD + Z275 according to NF EN 10346. Benefits

Mehr

Mounting- Instruction BMW E90-93 Doppel-DIN

Mounting- Instruction BMW E90-93 Doppel-DIN Mounting- Instruction BMW E90-93 Doppel-DIN 6.9.200 This mounting instruction shows you the best way for an exclusive installation for the double- DIN device, good luck!!! : demount the front panel with

Mehr

Proposal for Belt Anchorage Points

Proposal for Belt Anchorage Points Proposal for Belt Anchorage Points Heiko Johannsen Johannes Holtz Page 1 NPACS Belt Anchorage Points Positions acquired based on car measurements Front seats In most rear position Rear seats Upper Fwd

Mehr

Set T-Verbinder D28, Nut 10 Set T-Connector D28, Slot 10

Set T-Verbinder D28, Nut 10 Set T-Connector D28, Slot 10 >> Set T-Verbinder D28, Nut 10 Set T- Connector D28, Slot 10 Set T-Verbinder D28, Nut 10 Set T-Connector D28, Slot 10 Beschreibung zur rechtwinkligen Verbindung von einem Rundrohrprofil mit Aussendurchmesser

Mehr

Aluminiumprofile/Aluminium Profiles

Aluminiumprofile/Aluminium Profiles Art.-Nr. 04.0010 Laufrahmenprofil Schiebetür Gewicht: 1,9 kg/m 2 Art.-No. 04.0010 Slide frame profile for sliding doors Weight: 1,9 kg/m - Art.-Nr. 04.0020 Laufrahmenprofil Falttür 7 Art.-No. 04.0020 Slide

Mehr

Bedienungsanleitung SUNNYHEAT Standfuß (Art. Nr )

Bedienungsanleitung SUNNYHEAT Standfuß (Art. Nr ) Bedienungsanleitung SUNNYHEAT Standfuß (Art. Nr. 221012) Der SUNNYHEAT Standfuß ist zur Positionierung Ihres Heizpaneels auf dem Standfuß gedacht. Anwendung findet der Standfuß bei allen Paneelen außer

Mehr

66314 Spirituosen-Großhandel "Schluck&Specht KG" H0 Spirits Company "Schluck&Specht KG" H0 Société de spiritueux "Schluck&Specht KG" H0 Bodega de

66314 Spirituosen-Großhandel Schluck&Specht KG H0 Spirits Company Schluck&Specht KG H0 Société de spiritueux Schluck&Specht KG H0 Bodega de 66314 Spirituosen-Großhandel "Schluck&Specht KG" H0 Spirits Company "Schluck&Specht KG" H0 Société de spiritueux "Schluck&Specht KG" H0 Bodega de bebidas espirituosas "Schluck&Specht KG" H0 Dranken groothandel

Mehr

Technical Information

Technical Information Technische Information Technical Information ALEXA AT Anschlagtürzarge für / 10 mm Glas ALEXA AT single acting door frame for / 10 mm glass Mit verdeckter Befestigung, passend für DORMA Spezialbänder Art.-Nr.

Mehr

ELEGANT LINE EN DE. Assembly instructions for Elegant Line sauna. Montageanleitung für Elegant Line Sauna SD2015 SD2020

ELEGANT LINE EN DE. Assembly instructions for Elegant Line sauna. Montageanleitung für Elegant Line Sauna SD2015 SD2020 ELEGANT LINE EN Assembly instructions for Elegant Line sauna Montageanleitung für Elegant Line Sauna SD2015 SD2020 15122006 Please read through these assembly instructions before starting installation.

Mehr

Newest Generation of the BS2 Corrosion/Warning and Measurement System

Newest Generation of the BS2 Corrosion/Warning and Measurement System Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing

Mehr

Instrument table HT-020. description/ technical data. table height min.: 650mm table height max.: 1320mm tabletop Multiplex beech: 700x 460mm.

Instrument table HT-020. description/ technical data. table height min.: 650mm table height max.: 1320mm tabletop Multiplex beech: 700x 460mm. Wagner&Guder UG(mbH) & Co.KG HT-020 Multiplex beech: 700x 460mm table weight: 40kg 6x multiple socket 230VAC Schuko under table with wheels, two of them with brakes Wagner&Guder UG(mbH) & Co.KG HT-100

Mehr

Design: Tomasz Augustyniak

Design: Tomasz Augustyniak Design: Tomasz Augustyniak 3 KOKO 10 CHROME 4 2 x KOKO 1H CHROME, KOKO TABLE S2 KOKO 1P CHROME KOKO 1H CHROME KOKO armchair available in three versions: without armrests, with full or metallic armrests

Mehr

Zehnder ComfoWell 320

Zehnder ComfoWell 320 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with locking slides for

Mehr

UFPR. Extraction table with fan. Absaugtisch mit Ventilator Typ

UFPR. Extraction table with fan. Absaugtisch mit Ventilator Typ Fan VF, 3x400V, 2800 rpm. Manual Roto-cleaning Filter cartridge G111 Height-adjustable legs ust container beneath filter cartridge Table top is standard delivered with wooden sticks. Is available in other

Mehr

Light weight aluminium components. Leichte Bauteile aus Aluminium. Assembly without the need for mechanical lifts

Light weight aluminium components. Leichte Bauteile aus Aluminium. Assembly without the need for mechanical lifts O C TA m a x 5 0. T H E L I G H T W E I G H T D O U B L E D E C K S Y S T E M. O C TA m a x 5 0. D A S L E I C H T E D O P P E L S T O C K S Y S T E M. e x h i b i t i o n s y s t e m s O C TA m a x 5

Mehr

Q500 R Holzbauschrauben Q500 R chipboard screws for wood construction

Q500 R Holzbauschrauben Q500 R chipboard screws for wood construction Q500 Holzbauschrauben Q500 chipboard screws Flachsenkkopf, 30-Antrieb, kopfverstärkt mit Fräsrippen, Schaftfräser (außer bei 6,0x40 bis 6,0x100) Kerbspitze, radiale Schneidezähne gehärtet, blau verzinkt,

Mehr

Electrical testing of Bosch common rail piezo injectors

Electrical testing of Bosch common rail piezo injectors Applies to generation CRI 3: Bosch 10-position order number 0 445 115 = CRI 3-16 (CRI 3.0) 1600 bar 0 445 116 = CRI 3-18 (CRI 3.2) 1800 bar 0 445 117 = CRI 3-20 (CRI 3.3) 2000 bar Tools required: Hybrid

Mehr

MANET COMPACT Set 4.1 / 4.2

MANET COMPACT Set 4.1 / 4.2 MANET COMPACT 24 MANET COMPACT Set 4.1 / 4.2 Schiebetür MANET COMPACT für Montage an Wand, für 8-12 mm Glas, Set 4.1 mit versenkten Punkthaltern Set 4.2 mit aufliegenden Punkthaltern Fixlänge: LL = 4 *

Mehr

Design: Tomasz Augustyniak 3

Design: Tomasz Augustyniak 3 Design: Tomasz Augustyniak 3 KOKO 10 KOKO 1P KOKO 1H KOKO armchair available in three versions: without armrests, with full or metallic armrests with wooden pad KOKO Sessel ist in drei Versionen lieferbar:

Mehr

Deceleration Technology. Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H

Deceleration Technology. Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H 6030 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:

Mehr

Standard program. Telescopic slides.

Standard program. Telescopic slides. Standard program. Telescopic slides. Page 4-9 Partial extension slide. Travel approx. 70-% of slide length. Page 10-27 Full extension and over-extension slide. Travel 100 % of slide length. Page 28-35

Mehr

DEFLEX FLOOR PROFILES FUGENSYSTEME BODENPROFILE

DEFLEX FLOOR PROFILES FUGENSYSTEME BODENPROFILE FUGENSYSTEME BODENPROFILE FLOOR PROFILES BESAPLAST Dichtigkeitsprüfung für -Fugensysteme der Serie 500 nach TL/TP FÜ/Fahrbahnübergänge Leak test for joint system of series 500 acc. to TL/TP FÜ/roadway

Mehr

19 -modular case series MGC-classic. 19 -Einbaugehäuse Serie MGC-classic GEHÄUSE KATALOG

19 -modular case series MGC-classic. 19 -Einbaugehäuse Serie MGC-classic GEHÄUSE KATALOG GEHÄUSE KATALOG 19 -Einbaugehäuse Serie MGC-classic Modulare Gehäuseserie von 1 HE bis 6 HE Höhe zum Einbau von ungenormten Bauteilen. Ausführung: Frontplatte, Rückplatte und Seitenprofile aus Aluminium-Strangpressprofilen

Mehr

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H 12070 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:

Mehr

Einbau- und Montageanleitung Tankabdeckung TopCover Seite 2-4 Assembly and installation instructions Tank Cover - TopCover Page 5-7

Einbau- und Montageanleitung Tankabdeckung TopCover Seite 2-4 Assembly and installation instructions Tank Cover - TopCover Page 5-7 Einbau- und Montageanleitung Tankabdeckung TopCover Seite 2-4 Assembly and installation instructions Tank Cover - TopCover Page 5-7 TopCover DORW3115 17.04.2009 1 / 8 1. Allgemeines 1.1 Verkehrslasten

Mehr

1: Descrew the org device of the E53 (non navi model) and cutout the plastic frame till vertical side plates (next pic), best use a dremel like tool

1: Descrew the org device of the E53 (non navi model) and cutout the plastic frame till vertical side plates (next pic), best use a dremel like tool Mounting- Instruction BMW E53 Doppel-DIN 31.6.2009 This mounting instruction shows you the best way for an exclusive installation for the double- DIN device, good luck!!! 1 1: Descrew the org device of

Mehr

transfertische ohne antrieb transfer tables without drive

transfertische ohne antrieb transfer tables without drive 101 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 11 transfertische ohne antrieb transfer tables without drive > Transfertisch TOA 01-06 mit Einfachsegmenten // Transfertisch TOA 08-15

Mehr

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H Rotary Dampers with high-torque range WRD-H 67 WRD-H 85 WRD-H 128 WRD-H 161 WRD-H 21 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Applications: - Mechanical and

Mehr

Price list Octopus and Mobile Racks B, C, R valid from 1 January 2019

Price list Octopus and Mobile Racks B, C, R valid from 1 January 2019 Dabelju-B590-VV Price list Octopus and Mobile Racks B, C, R valid from 1 January 2019 118 kg 1672,-- Dabelju-B780-VV 134 kg 1823,-- Mobile Rack B590 2/0 2/2 X XX X3 935,-- 1363,-- 1087,-- 1272,-- 1777,--

Mehr

Multidiscussion Systems

Multidiscussion Systems Multidiscussion Systems A Great View from Every Position The image orientation is identical for all observers and is completely independent of the configuration. The image orientation is displayed for

Mehr

PRODUKTNEUHEITEN PRODUCT NEWS

PRODUKTNEUHEITEN PRODUCT NEWS 2018 PRODUKTNEUHEITEN PRODUCT NEWS PPS 4.0 - EINZIGARTIGES BASIS-PROFIL PPS 4.0 - UNIQUE BASE PROFILE PPS -Champion mit neuem BASIS-Profil 40 mm breites BASIS-Profil für seitlich versetzte Befestigung

Mehr

BG-Schlitzrinnen / BG-slot-channel PROFIL I-3, DN20x30

BG-Schlitzrinnen / BG-slot-channel PROFIL I-3, DN20x30 BG-Schlitzrinnen / BG-slot-channel PROFIL I-3, DN20x30 Belastungsklassen / load-classes: D400kN Höhe / height: 500 + 120 mm Länge / length: 4.000 mm Breite / width: 400/450 mm Schlitz-Weite/Länge / slot-width/length:

Mehr

Bedienungsanleitung Operation Manual

Bedienungsanleitung Operation Manual Bedienungsanleitung Operation Manual Laminatcutter XP-215 Laminate cutter XP-215 www.cutinator.com 1. Anschlag auf der Ablage Auf der Ablage der Stanze befinden sich drei Arretierungen für den Anschlag.

Mehr

SIMATIC Industrie-PC IPC477D PRO Produktinformation

SIMATIC Industrie-PC IPC477D PRO Produktinformation SIMATIC Industrie-PC Produktinformation Gültigkeit Die Hinweise in dieser Produktinformation sind den Aussagen in den zu Grunde liegenden Betriebsanleitungen, in den Release Notes und in der Online-Hilfe

Mehr

Beschlagset jeweils anwendbar für abgebildete Einbausituation // hinge set for installation according to drawing

Beschlagset jeweils anwendbar für abgebildete Einbausituation // hinge set for installation according to drawing Beschlagset jeweils anwendbar für abgebildete Einbausituation // hinge set for installation according to drawing Einflügelige Anlage für Wandbefestigung, für 8 12 mm ESG // single-leaf door system, wall

Mehr

Attenuator and Distribution System Zehnder ComfoWell 220

Attenuator and Distribution System Zehnder ComfoWell 220 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for

Mehr

Einrohr-Verstelleinheiten auf Rund- oder Vierkantrohrbasis Single tube linear units with round or square tubes

Einrohr-Verstelleinheiten auf Rund- oder Vierkantrohrbasis Single tube linear units with round or square tubes auf Rund- oder Vierkantrohrbasis with round or square tubes Übersicht / Overview Rechts- oder Linksgewinde Right- or left-hand thread siehe Seite 105 / see page 105 Geteilte Gewindespindel Separated spindle

Mehr

Seitenkoffer Topcases Gepäckträger Lock it System Softbags Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer Chopper-Parts Quad-Parts Accessoires

Seitenkoffer Topcases Gepäckträger Lock it System Softbags Aluminiumkoffer Lederkoffer Schutzbügel Hauptständer Chopper-Parts Quad-Parts Accessoires Gepäckbrücke lu-rack YMH FZ 6/ Fazer ab 2007 rtikel-nr.: 650.4521.01 01 schwarz rtikel-nr.: 650.4521.01 09 silber rtikel-nr.: 650.4520.01 01 schwarz rtikel-nr.: 650.4520.01 09 silber Seitenkoffer Topcases

Mehr