SPL PL90_3. Anwendungen Entfernungsmessung Sicherheit, Überwachung Beleuchtung, Zündung Test- und Messsysteme

Transkript

1 Nanostack Impuls-Laserdiode im Plastikgehäuse 75 W Spitzenleistung Nanostack Pulsed Laser Diode in Plastic Package 75 W Peak Power Lead (Pb) Free Product - RoHS Compliant SPL PL9_3 Besondere Merkmale Kostengünstiges Plastikgehäuse Zuverlässiges InGaAs/GaAs kompressiv verspanntes Halbleiter-Material Hochleistungslaser mit Large-Optical-Cavity (LOC) Struktur für ein schmales Fernfeld Nanostack Lasertechnologie beinhaltet mehrere epitaktisch integrierte Emitter Austrittsöffnung 2 µm 1 µm Anwendungen Entfernungsmessung Sicherheit, Überwachung Beleuchtung, Zündung Test- und Messsysteme Sicherheitshinweise Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare Infrarot- Strahlung, die gefährlich für das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, müssen gemäß den Sicherheitsrichtlinien der IEC-Norm behandelt werden. Features Low cost plastic package Reliable strained InGaAs/GaAs material High power large-optical-cavity (LOC) structure for a narrow far-field Nanostack laser technology including multiple epitaxially stacked emitters Laser aperture 2 µm 1 µm Applications Range finding Security, surveillance Illumination, ignition Test and measurement systems Safety Advices Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC Safety of laser products Typ Type Emitteranzahl Number of Emitters Opt. Spitzenausgangsleistung Opt. Peak Power Wellenlänge Wavelength Bestellnummer Ordering Code SPL PL9_ W 95 nm Q6272P

2 Grenzwerte (kurzzeitiger Betrieb) (T A = 25 C) Maximum Ratings (short time operation) Spitzenausgangsleistung Peak output power Spitzendurchlaßstrom Peak forward current Pulsbreite (Halbwertsbreite) Pulse width (FWHM) Tastverhältnis Duty cycle Sperrspannung Reverse voltage Betriebstemperatur Operating temperature Lagertemperatur Storage temperature Löttemperatur (t max = 1 s, 2 mm von Gehäuseunterseite) Soldering temperature (t max = 1 s, 2 mm from bottom edge of case) Werte Values min. max. P peak 9 W I F 4 A t p 1 ns d.c..1 % V R 3 V T op C T stg C T s + 26 C Einheit Unit

3 Optische Kennwerte (T A = 25 C) Optical Characteristics Werte Values min. typ. max. Zentrale Emissionswellenlänge 1) λ peak nm Emission wavelength 1) Spektralbreite (Halbwertsbreite) 1) λ 7 nm Spectral width (FWHM) 1) Spitzenausgangsleistung 1) P op W Peak output power 1) Schwellstrom Threshold current I th A Betriebsspannung 1) V op V Operating voltage 1) Minimale Anstiegs- und Abfallzeit (1% 9%) Minimum rise and fall time (1% 9%) Austrittsöffnung Aperture size Strahldivergenz (Halbwertsbreite) Beam divergence (FWHM) Temperaturkoeffizient der Wellenlänge Temperature coefficient of wavelength Temperaturkoeffizient der opt. Ausgangsleistung Temperature coefficient of optical power Thermischer Widerstand Thermal resistance t r, t f 1 ns w h 2 1 µm Einheit Unit θ θ Grad deg. λ / T.28 nm/k P op /P op T -.4 %/K R th JS 16 K/W 1) Standardbetriebsbedingungen beziehen sich auf eine Pulsbreite von 1 ns bei einer Frequenz von 1 khz und einem Betriebsstrom von 3 A bei T A = 25 C. Standard operating conditions refer to pulses of 1 ns pulse width at 1 khz rate with 3 A operating current at T A = 25 C

4 Optical output power P opt and forward voltage V F vs. forward current I F (T A = 25 C) Optical spectrum, relative intensity I rel vs. wavelength λ (T A = 25 C, P opt = 75 W) V F 12 V 1 OHF W 1 P opt Ι rel 1. OHF A 5 I F nm 93 λ Far-field distribution parallel to junction I rel vs. θ (T A = 25 C, P opt = 75 W) Far-field distribution perpendicular to junction I rel vs. θ (T A = 25 C, P opt = 75 W) I rel 1. OHL755 I rel 1. OHL Deg 3 θ Deg 4 θ

5 Maßzeichnung Package Outlines Chip position 2.54 (.1) mm spacing Cathode Area not flat.6 (.24).4 (.16).8 (.31).4 (.16) 1.8 (.71) 1.2 (.47) 29. (1.142) 27. (1.63) X 5. (.197) 4.2 (.165) Bottom view 5.9 (.232) 5.5 (.217) Y.6 (.24).4 (.16) Chip position Detail X Detail Y.1 (.4)....7 (.28) 5.1 (.21) (.67) 1.9 (.75) (.189) ø.3 A 3.5 (.138) 3.7 (.146) A GEOY666 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)

6 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-9349 Regensburg All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1, may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered