CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that. voestalpine Grobblech GmbH
|
|
- Sarah Ackermann
- vor 7 Jahren
- Abrufe
Transkript
1 CERTIFICATE The Notified Body of TÜV SÜD Industrie Service GmbH certifies that voestalpine Grobblech GmbH voestalpine-straße 3 A 4020 Linz has implemented, operates and maintains a Quality Assurance System in accordance with the Pressure Equipment Directive 2014/68/EU, Annex I, Section 4.3 as well as AD 2000-Merkblatt W 0 as a material manufacturer for the scope of pre-material, hot and cold rolled steels products, formed plate parts and cladded plates. The scope of the approval is described in the annex to this certificate. Further details are mentioned in report no The manufacturer is therefore authorized to issue certificates of specific product control within the scope of the assessed quality system and in accordance with the Pressure Equipment Directive 2014/68/EU. Possible additional requirements - specific to applied technical specifications to meet PED Annex I - are not affected. This certificate is valid through April The validity of this certificate is connected to a valid certification in accordance with ISO 9001:2008. Certificate : DGR-0036-QS-W 13/2003/MUC Munich, July 20 th, 2016 Notified Body, 0036 (M. Strobel) Certification Body and Welding Technology EQ TÜV SÜD Industrie Service GmbH, Westendstr. 199, Munich, Germany
2 Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach AD 2000-Merkblatt W 0 Scope of the approval - Manufacturer of material in accordance with AD 2000-Merkblatt W 0 Ort/City: 4020 Linz Werk / plant: A v. / of 6 Notifizierte Stelle, Notified Body, Allgemeine Baustähle / DIN N/U/CR Band / strip 3 d AD 2000 W1/W10 construction steels EN Blech / plate 3 d TRD Stähle f. Kesselbleche/ DIN N/V Blech / plate 0,3 d AD 2000 W1/W10 (HI, H II, 17Mn4, 19Mn6) plates for boilers EN 10028/2 CR Blech / plate 80 TRD 101 (P235GH, P265GH, P295GH, P355GH) Ni 14, X12 Ni 5, X 8 Ni 9, EN N/V/A Blech / plates d AD 2000 W1/W10 11MnNi5-3, 13MnNi6-3 DIN Allgemeine Baustähle/ DIN 1623/2 N Band / strip 3 TRG 201 construction steels Blech / plate 3 05 Austenitische Stähle / DIN A Blech / plate 100 AD 2000 W2/W10 stainless steels SEW 400 Blech / plates d TRD 101 EN Feinkornbaustähle/fine grain steels DIN N/V Blech / plate 120 AD 2000 W1/W10 f1 = 351/1 357/1 StE StE 460 VdTÜV f1 CR Blech / plate 80 TRD bis/till 140 mm (G-, W-, T-, E-Güte/quality) EN 10028/3 (CR bis/till StE 355, G-, W-, T-Güte/quality) P 275 P 460 EN (N-, NH-, NL 1-, EN NL 2-Güten/qualities) 07 Alfrig 40V, 45V, 50 VdTÜV 280 V Blech / plate 60 AD 2000 W1/W Ni 14 VdTÜV 282 N/V Blech/plate 50 AD 2000 W1/W10 Bericht report no a = in Spalte 10 / material designation in column 10 b = Lieferzustand in Spalte 10 / delivery condition in column 10 c = in Spalte 10 / object in column 10 d = Abmessung gem. tech. Regeln / dimensions acc. to technical rules
3 Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach AD 2000-Merkblatt W 0 Scope of the approval - Manufacturer of material in accordance with AD 2000-Merkblatt W 0 Ort/City: 4020 Linz Werk / plant: A v. / of 6 Notifizierte Stelle, Notified Body, X6 CrNi (1.4948) DIN A Blech/plate 100 AD 2000 W2 TRD Altherm NiMoV VdTÜV 314 V Blech/plate 150 AD 2000 W1 TRD Aldur 45/60, 50/65 VdTÜV 369 V Blech/plate 100 AD 2000 W1/W10 Aldur 58/72 D bis/till 60 mm, Prüf-Nr./Test no. 55/68 D, 58/72 D mit Einzelgut. / with indiv. expertise Aldur AF 45/60, 50/ MnMoNi 5 5 VdTÜV 401/1 V Blech/plate VdTÜV 401/1 Pressteile / formed plate parts 13 Boiler VdTÜV 403 N/CR Blech/Plate 5 AD 2000 W1 Band Strip MnNi 63 VdTÜV 427/1 N Blech, Pressteil/ VdTÜV 427/1 Plate, formed plate parts MnMoNi 4 5 VdTÜV 440/1 V Blech/plate AD 2002 W1 Pressteil/ formed TRD 101/202 plate parts AD 2000 HP8/ MnNi 6 3 VdTÜV 460/1 N Blech / plate AD 2000 W1/W10 Bericht report no Preßteil / formed plate part AD 2000 HP8/1 TRD 101/202 a = in Spalte 10 / material designation in column 10 b = Lieferzustand in Spalte 10 / delivery condition in column 10 c = in Spalte 10 / object in column 10 d = Abmessung gem. tech. Regeln / dimensions acc. to technical rules
4 Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach AD 2000-Merkblatt W 0 Scope of the approval - Manufacturer of material in accordance with AD 2000-Merkblatt W 0 Ort/City: 4020 Linz Werk / plant: A v. / of 6 Notifizierte Stelle, Notified Body, Werkstoffe nach b4 Pressteil / formed plate AD 2000 HP8/1 b4 = siehe jeweils Spalte 4 der genannten Nr./ s acc. : 01, TRD 202 see each column 4 of the consecutive named 02, 03, 05, 06, 10, 11, 12, 13, 14, 15, 16, 20, Werkstoffe nach Nr./ b4 walzplattiertes Blech/ d1 AD 2000 W8 d1= siehe jeweils Spalte 6b der gen. Nrn. s acc. 01, 02 rolled clad plate VdTÜV 1264 see each column 6b of the consecutive named no. 03, 05, 06, 10, 11,12, 13 A = I-IV, G = I-III Wanddicke bis 80 mm, MK 1264/ wallthickness 14, 15, 16, till 80 mm, MK St 1403 TiVac lierwerkstoffe / Anwendungsgutachten, Prüf-Nr. MP4/1313 bzw /or. Enamel material Manufacturer Expertise, Test- MP4/1313 St 03 FA CCE/St 04 CCE 20 P 460 NL2, mod. VdTÜV 531 N Blech / Boden / 7 20 AD 2000 W1 plate / head NiCuMoNb VdTÜV 377/1 V Blech / plate AD 2000 W1 Bericht report no a = in Spalte 10 / material designation in column 10 b = Lieferzustand in Spalte 10 / delivery condition in column 10 c = in Spalte 10 / object in column 10 d = Abmessung gem. tech. Regeln / dimensions acc. to technical rules
5 Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach DGR 2014/68/EU, Anhang I, Abschnitt 4.3 Scope of the approval Manufacturer of material in accordance with PED 2014/68/EU, Annex I, Section 4.3 Ort/City: 4020 Linz Werk / plant: A v. / of 6 Notifizierte Stelle, Notified Body, Allgemeine Baustähle / EN N/U/CR Band / strip 3 d construction steels Blech / plate 3 d 02 Stähle f. Kesselbleche/ EN 10028/2 N/V Blech / plate 0,3 d plates for boilers CR Blech / plate MnNi5-3, 13MnNi6-3, DIN N/V/A Blech / plates d 12 Ni 14, X 12 Ni 5, X 8 Ni 9, X 7 Ni 9 Bei Verwendung der Werkstoffe in Spalte 2 bis 4 sind die Festlegungen und Grenzen des 04 Austenitische Stähle / EN A Blech / plate d jeweiligen Regelwerkes zu beachten stainless steels Für die spezifischen Einsatzbedingungen der Werkstoffe ist die Zustimmung des 05 Feinkornbaustähle/fine grain steels EN 10028/3 N/V Blech / plate 120 Druckgeräteherstellers bzw. der zuständigen StE StE 460 EN CR Blech / plate 80 Benannten Stelle erforderlich. / (G-, W-, T-, E-Güte/quality) EN For the use of materials acc. to column 2 till 4 P P 460 the regulations and limits of the respective (N-, NH-, NL 1-, standards have to be observed. NL 2-Güten/qualities) The specific material operating conditions have to be approved by the pressure 06 Alfrig 40V, 45V, 50 VdTÜV 280 V Blech / plate 60 equipment manufacturer or respectively by the Notified Body in charge Ni 14 VdTÜV 282 N/V Blech/plate X6 CrNi (1.4948) DIN A Blech / plate 100 Bericht report no a = in Spalte 10 / material designation in column 10 b = Lieferzustand in Spalte 10 / delivery condition in column 10 c = in Spalte 10 / object in column 10 d = Abmessung gem. tech. Regeln / dimensions acc. to technical rules
6 Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach DGR 2014/68/EU, Anhang I, Abschnitt 4.3 Scope of the approval Manufacturer of material in accordance with PED 2014/68/EU, Annex I, Section 4.3 Ort/City: 4020 Linz Werk / plant: A v. / of 6 Notifizierte Stelle, Notified Body, Altherm NiMoV VdTÜV 314 V Blech / plate Aldur 45/60, 50/65 VdTÜV 369 V Blech /plate /68 D, 58/72 D Aldur AF 45/60, 50/ MnMoNi 5 5 VdTÜV 401/1 V Blech / plate Pressteile / formed plate parts Bei Verwendung der Werkstoffe in Spalte 2 bis 12 Boiler VdTÜV 403 N/CR Blech / plate 5 4 sind die Festlegungen und Grenzen des Band / strip 5 jeweiligen Regelwerkes zu beachten Für die spezifischen Einsatzbedingungen der MnNi 63 VdTÜV 427/1 N Blech, Pressteil/ Werkstoffe ist die Zustimmung des Plate, formed plate parts Druckgeräteherstellers bzw. der zuständigen Benannten Stelle erforderlich. / MnMoNi 4 5 VdTÜV 440/1 V Blech / plate For the use of materials acc. to column 2 till 4 Pressteil / formed plate parts the regulations and limits of the respective standards have to be observed MnNi 6 3 VdTÜV 460/1 N Blech / plate The specific material operating conditions Pressteil / formed plate parts have to be approved by the pressure equipment manufacturer or respectively by the 16 Werkstoffe nach / b4 Pressteil / formed plate parts Notified Body in charge. s acc. : 01, 02, 03 05, 06, 10, 11,12, 13, 14, 15 16, 20, 21, Bericht report no a = in Spalte 10 / material designation in column 10 b = Lieferzustand in Spalte 10 / delivery condition in column 10 c = in Spalte 10 / object in column 10 d = Abmessung gem. tech. Regeln / dimensions acc. to technical rules
7 Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach DGR 2014/68/EU, Anhang I, Abschnitt 4.3 Scope of the approval Manufacturer of material in accordance with PED 2014/68/EU, Annex I, Section 4.3 Ort/City: 4020 Linz Werk / plant: A v. / of 6 Notifizierte Stelle, Notified Body, Werkstoffe nach b4 walzplattiertes Blech/ d1 s acc. 01, 02 rolled clad plate 06, 07, 10, 11 A = I-IV, G = I-III 18 St 1403 TiVac lierwerkstoffe / bzw /or. enamle material St 03 FA CCE/St 04 CCE 19 P 460 NL2, mod. VdTÜV 531 N Blech / Boden / 7 20 plate / head Bei Verwendung der Werkstoffe in Spalte 2 bis NiCuMoNb VdTÜV 377/1 V Blech / Plate sind die Festlegungen und Grenzen des jeweiligen Regelwerkes zu beachten Für die spezifischen Einsatzbedingungen der Werkstoffe ist die Zustimmung des Druckgeräteherstellers bzw. der zuständigen Benannten Stelle erforderlich. / For the use of materials acc. to column 2 till 4 the regulations and limits of the respective standards have to be observed. The specific material operating conditions have to be approved by the pressure equipment manufacturer or respectively by the Notified Body in charge. Bericht report no a = in Spalte 10 / material designation in column 10 b = Lieferzustand in Spalte 10 / delivery condition in column 10 c = in Spalte 10 / object in column 10 d = Abmessung gem. tech. Regeln / dimensions acc. to technical rules
CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that FEAT INDUSTRIALE S.p.A. Via G. Parini, 30 I-23861 Cesana Brianza (LC) has implemented, operates and maintains a Quality
MehrCERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that ACERIA DE ALAVA S.A.U. (ACERALAVA) Polígono Industrial Saratxo s/n. E-01470 Amurrio has implemented, operates and
MehrCERTIFICATE. The Certification Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Certification Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that North American Stainless 6870 Highway 42 East Ghent, KY 41045-9615 USA has implemented, operates and maintains
MehrCERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that. TMK - ARTROM S.A. Str. Drăgăneşti Nr. 30 RO Slatina
CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that TMK - ARTROM S.A. Str. Drăgăneşti Nr. 30 RO-230119 Slatina has implemented, operates and maintains a Quality Assurance
MehrCERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that FOMAS S.P.A. Via Martiri della Liberazione, 17 I-23875 Osnago (Lecco) has implemented, operates and maintains a Quality
MehrZERTIFIKAT. Die Notifizierte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma
ZERTIFIKAT Die Notifizierte Stelle - Kennnummer 0036 - der TÜV SÜD Industrie Service GmbH bescheinigt, dass die Firma S.C. ArcelorMittal Tubular s Galati S.R.L. Calea SMÎRDAN Nr. 1-T RO - 800698 Galaţi
MehrCERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICTE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that Outokumpu Stainless Pipe, Inc. 241 W. Clarke Street Wildwood, FL 34785 US has implemented, operates and maintains
MehrZERTIFIKAT. Die Notifizierte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma
ZERTIFIKAT Die Notifizierte Stelle - Kennnummer 0036 - der TÜV SÜD Industrie Service GmbH an den Herstellwerken: bescheinigt, dass die Firma ATI Flat Rolled s Holdings LLC, dba ATI Flat Rolled s Natrona
MehrZERTIFIKAT. Die Notifizierte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma
ZERTIFIKAT Die Notifizierte Stelle - Kennnummer 0036 - der TÜV SÜD Industrie Service GmbH an den Herstellwerken: bescheinigt, dass die Firma ATI Flat Rolled s Holdings LLC, dba ATI Flat Rolled s Natrona
MehrZERTIFIKAT. Die Notifizierte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma. Allegheny Ludlum, LLC dba
ZERTIFIKAT Die Notifizierte Stelle - Kennnummer 0036 - der TÜV SÜD Industrie Service GmbH bescheinigt, dass die Firma Allegheny Ludlum, LLC dba ATI Flat Rolled s 100 River Road Brackenbridge, PA 15014,
MehrAbmessungen Dimensions Durchmesser. Dicke. Thickness. Diameter a 3b 4 5 6a 6b 7a 7b 8a 8b 9a 9b 11
Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach AD 2000-Merkblatt W 0 Scope of the approval - Manufacturer of material in accordance with AD 2000-Merkblatt W 0 DGR-0036-QS-W 167/2003/MUC
MehrAbmessungen Dimensions Durchmesser. Dicke. Thickness. Diameter
Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach AD 2000-Merkblatt W 0 Scope of the approval - Manufacturer of material in accordance with AD 2000-Merkblatt W 0 Ort/City: I-11100 Aosta
MehrBlatt-Nr. Page no. Datum - Date von - from 3. Abmessungen - dimensions. Gewicht Weight. Dicke / thickness Breite / width. max.
Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach DGR (2014/68/EU), Anhang I, Nummer 4.3 - Scope of approval - Manufacturer of Base Materials used in accordance to PED (2014/68/EU), Annex
MehrAbmessungen / Bemerkungen / Werkstoff-Nr. / Dimensions. Remarks Material Designation
Geltungsbereich der Überprüfung als Hersteller von Werkstoffen nach AD 2000-Merkblatt W 0 Scope of the approval - Manufacturer of material in accordance with AD 2000-Merkblatt W 0 Manufacturer: Straße/Street:
MehrZERTIFIKAT. Die Benannte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma
ZERTIFIKAT Die Benannte Stelle - Kennnummer 0036 - der TÜV SÜD Industrie Service GmbH bescheinigt, dass die Firma Böhler Edelstahl GmbH & Co KG Mariazeller Straße 25 A-8605 Kapfenberg als Werkstoffhersteller
MehrZERTIFIKAT. voestalpine Böhler Welding Fileur, SpA. VdTÜV-Merkblatt 1153 in Verbindung mit AD 2000-Merkblatt W 0. Die Firma
ZERTIFIKAT Die Firma wurde als Hersteller von Schweißzusätzen nach VdTÜV-Merkblatt 1153 in Verbindung mit AD 2000-Merkblatt W 0 wiederkehrend überprüft und anerkannt. Der Geltungsbereich der Überprüfung
MehrZERTIFIKAT. Überprüfung einer Fertigungsstätte für Druckgeräte nach Richtlinie 97/23/EG. Zertifikat-Nr.: WZ-3541/14
TüVNORD ZERTIFIKAT Überprüfung einer Fertigungsstätte für Druckgeräte nach Richtlinie 97/23/EG Name und Anschrift Herstellers: Fertigungsstätte: des Zertifikat-Nr.: 07-202-1410 WZ-3541/14 S & R GmbH Schweiß-
MehrZERTIFIKAT. Die TÜV NORD Systems GmbH & Co. KG. bescheinigt, dass das Unternehmen. BENTELER Steei/Tube GmbH Wollmarktstraße 8-10 D Paderborn
TuYNORD ZERTIFIKAT Die TÜV NORD Systems GmbH & Co. KG bescheinigt, dass das Unternehmen als Werkstoffhersteller gemäß AD 2000-Merkblatt WO überprüft und anerkannt wurde. Zertifi kat-n r.: 07/203/1 082/WP
MehrLukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen
Technical Report No. 028-71 30 95685-350 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
MehrEG-Zertifikat. wurde das Teilsystem (genauer beschrieben im Anhang) the following subsystem (as detailed in the attached annex)
_. _ NOTIFIED BODY INTEROPERABILITY EG-Zertifikat EC Certificate EG-Baumusterprufbescheinigung EC Type Examination Certificate Zertifikat-Nummer/ certificate Number: 0893/1/SB/12/RST/DE EN/2201 GemaR,
MehrCompany Certificates
Company Certificates Company Certificates Expire date Certificate name Certified and audited by 26-Okt-2018 ASME U stamp [NB] National Board 26-Okt-2018 ASME R stamp [NB] National Board National Board
MehrLukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. edraulic rescue equipment
Technical Report No. 028-7130 95685-050 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Steckverbinder für PV-Systeme, AC-Anwendung (COC) Connector for PV-Systems,
MehrLEISTUNGSERKLÄRUNG. Nr DE. insbesondere Anhänge B 1 bis B 3
LEISTUNGSERKLÄRUNG Nr. 0015 DE 1. Eindeutiger Kenncode des Produkttyps: fischer Bolzenanker FBN II, FBN II A4 2. Verwendungszweck(e): Produkt Kraftkontrolliert spreizender Dübel Verwendungszweck (e) Nachträgliche
Mehrs 120; s 311; s 312; s 330; s 510; s 511; s 530; s 700
Technical Report No. 028-7130 95685-250 of 02.12.2016 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
MehrRohre ASME 2014 rff Stark verbunden. Technische Grundlagen Pipes Technical basics
Rohre ASME 2014 rff Stark verbunden. Rohre Technische Grundlagen Pipes Technical basics ASME 2 rff.de Inhalt Content Über rff About rff Expertise in ASME Expertise in ASME 4 / 5 Lieferprogramm DIN EN /
MehrEU Declaration of conformity
EU Declaration of conformity Confirm with the Directive 98/37/EC, Appendix II A: of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Durchflußerwärmer, geschlossen Instantaneous water heater,
MehrCERTIFICATE ISO 9001:2015. IGEL Technology GmbH. DEKRA Certification GmbH hereby certifies that the company
CERTIFICATE ISO 9001:2015 DEKRA Certification GmbH hereby certifies that the company Scope of certification: Production, marketing and sales of thin client systems, information and communication technology,
MehrCERTIFICATE. with the organizational units/sites as listed in the annex. Scope: Administration of the associated production units of the KUKA Group
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Administration of the associated production units
MehrVdTÜV-Kennblatt for welding consumables
3 Welding consumable*: Drahtelektrode 4 Trade name*: VDM FM 82 7 Type*: EN ISO 18274 - S Ni 6082 (NiCr20Mn3Nb) (2.4806) 11 Diameter range: 0,8 bis 1,6 mm 12 Auxiliary materials: EN ISO 14175 - I1 und I3
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Espresso-Kaffeebereiter mit Mühle Espresso coffee maker
MehrLEISTUNGSERKLÄRUNG. Nr DE
LEISTUNGSERKLÄRUNG Nr. 0057 DE 1. Eindeutiger Kenncode des Produkttyps: fischer termoz PN 8 2. Verwendungszweck(e): Produkt Kunststoffdübel für die Verwendung in Beton und Mauerwerk Verwendungszweck (e)
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Einbauteil für IT Geräte Component for IT equipment Typ(en)
MehrZERTIFIKAT TÜV SÜD-W Stefan Löhr Metallbau GmbH Jessenwanger Straße 48 DE Grafrath. Der oben genannte Hersteller erfüllt die
ZERTIFIKAT Hersteller: Stefan Löhr Metallbau GmbH Jessenwanger Straße 48 Fertigungsstätte(n): Jessenwanger Straße 48 Der oben genannte Hersteller erfüllt die Standard-Qualitätsanforderungen für das Schmelzschweißen
MehrKonvertierungstabellen Normen
Normen DIN EN ISO 1127 DIN 2391 DIN EN 13480-3 DIN 2559 Nichtrostende Stahlrohre Maße, Grenzabmaße und längenbezogene Masse Nahtlose Präzisionsstahlrohre (Diese Norm gilt an sich nur für unlegierte Stähle.
MehrCertificat de conformité du contrôle de production en usine 1148-CPR INDUSTEEL BELGIUM SA 266, rue de Châtelet B-6030 CHARLEROI
Rue Ravenstein, 4 B-1000 BRUXELLES Certificat de conformité du contrôle de production en usine 1148-CPR-20060925 Conformément au Règlement 305/2011/EU du Parlement européen et du Conseil du 9 mars 2011
MehrCERTIFICATE TÜV SÜD-W Tiverton Business Park GB Tiverton DevonEX 16 6TG. The above mentioned company fulfils the.
CERTIFICATE Manufacturer: Tiverton Fabrications Limited Tiverton Business Park GB Tiverton DevonEX 16 6TG The above mentioned company fulfils the comprehensive quality requirements for fusion welding of
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Steckverbinder (COC) Connector (COC) Typ(en) / Type(s): 1 Female part Housing
MehrZERTIFIKAT. Karl Dungs GmbH & Co. KG Siemensstraße 6-10 73660 Urbach Deutschland ISO 9001:2008
ZERTIFIKAT Die Zertifizierungsstelle der TÜV SÜD Management Service GmbH bescheinigt, dass das Unternehmen Siemensstraße 6-10 73660 Urbach Deutschland einschließlich der Standorte und Geltungsbereiche
MehrTest Report. Test of resitance to inertia effects of Zirkona Backwall. Sled Test (Frontal Impact) 20 g / 30 ms
Test Report Test of resitance to inertia effects of Zirkona Backwall Sled Test (Frontal Impact) 20 g / 30 ms This report serves solely as a documentation of test results. 93XS0002-00_TdC.doc Page 1 1.
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Elektromagnetischer Koppler Electromagnetic coupler Typ(en) / Type(s): 1]
MehrFunkzulassungen FUNKZULASSUNGEN. Funkzulassungen
Funkzulassun gen FUNKZULASSUNGEN Funkzulassungen Die Konformitätserklärungen stammen von Herstellern von HF-Geräten (Hochfrequenzgeräten), deren Komponenten bei der Herstellung Ihres Range Rover Sport
MehrLeistungserklärung Declaration of Performance Gemäß/acc. EU-Verordnung/Regulation (EU) 305/2011, Anhang/Annexe III
voestalpine-straße 3 4020 Linz, Austria T. +43/50304/15-0 F. +43/50304/55-0 www.voestalpine.com/grobblech Rechtsform/Legal Form: Gesellschaft mit beschränkter Haftung / Limited Liability Sitz/Registered
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... 1] DuM 1100 2] DuM 1200 3] DuM 1201 4] DuM 1210 5] DuM 1300 6] DuM 1301 7] DuM 1310 8] DuM 1400 9] DuM 1401
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with
MehrLEISTUNGSERKLÄRUNG. DoP: 0094 für Injektionssystem fischer FIS V (Verbundanker für die Verwendung in Beton) DE
LEISTUNGSERKLÄRUNG DoP: 0094 für Injektionssystem fischer FIS V (Verbundanker für die Verwendung in Beton) DE 1. Eindeutiger Kenncode des Produkttyps: DoP: 0094 2. Verwendungszweck(e): Nachträgliche Befestigung
MehrLeistungserklärung Declaration of Performance Gemäß/acc. EU-Verordnung/Regulation (EU) 305/2011, Anhang/Annexe III
voestalpine-straße 3 4020 Linz, Austria T. +43/50304/15-0 F. +43/50304/55-0 www.voestalpine.com/grobblech Rechtsform/Legal Form: Gesellschaft mit beschränkter Haftung / Limited Liability Sitz/Registered
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with
Mehr~ "~ERT ZERTIFIKAT. Konformitat der werkseigenen Produktionskontrolle 24S1-CPR-ENI S
~ "~ERT ZERTIFIKAT Konformitat der werkseigenen Produktionskontrolle 24S1-CPR-ENI090-201S.0833.001 GemaB der Verordnung (EU) Nr. 305/2011 des Europaischen Parlaments und des Rates vom 09. Marz 2011 IBauproduktenverordnung
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Zündgerät für Hochdruck-Entladungslampen Ignitor for
Mehrfür das Managementsystem nach DIN EN ISO 9001:2008 Der Nachweis der regelkonformen Anwendung wurde erbracht und wird gemäß TÜV PROFiCERT-Verfahren bescheinigt für Valco Werkstoffe und Industrie-Service
MehrBleche aus rost-, säure- und hitzebeständigem Edelstahl. Sheet metals from heat resistant, high grade and stainless steel
Bleche aus rost-, säure- und hitzebeständigem Edelstahl Sheet metals from heat resistant, high grade and stainless steel Qualität für jeden Anspruch Quality for all needs Als Vertriebspartner namhafter
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Kunststoffschneidewerkzeug Plastic cutting tool Typ(en)
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. DEHNrail M Typ(en) / Type(s) DR M 2P 30; DR M 2P 30 FM
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Halogenfreies Installationskabel mit verbessertem Verhalten im Brandfall für
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Blankwiderstands-Durchflußerwärmer, geschlossen Bare Element
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Steckverbinder (COC) Connector (COC) Typ(en) / Type(s)
MehrLEISTUNGSERKLÄRUNG. Nr DE
LEISTUNGSERKLÄRUNG Nr. 0065 DE 1. Eindeutiger Kenncode des Produkttyps: Injektionsanker System UPM 44 2. Verwendungszweck(e): Produkt Verbundanker zur Verwendung in Beton Verwendungszweck (e) Verankerungen,
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder Jacob GmbH Elektrotechnische Fabrik, Gottlieb-Daimler-Straße
MehrZERTIFIKAT TÜV SÜD-W ETS Efficient Technical Solutions GmbH Keltenring 16 DE Oberhaching
ZERTIFIKAT TÜV SÜDW0303.2016.001 Hersteller: ETS Efficient Technical Solutions GmbH Keltenring 16 Fertigungsstätte(n): Keltenring 16 Der oben genannten Hersteller erfüllt die umfassenden Qualitätsanforderungen
MehrLOC Pharma. Anlage. Lieferantenfragebogen Supplier Questionnaire. 9. Is the warehouse temperature controlled or air-conditioned?
Please complete this questionnaire and return to: z.h. Leiter Qualitätsmanagement info@loc-pharma.de Name and position of person completing the questionnaire Signature Date 1. Name of Company 2. Address
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
40018443 Blatt / page 2 5006301-4880-0001 / 151670 / FG34 / SCT 2011-07-08 2006-08-02 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40018443. This supplement
MehrQualification Organisation - FOR USE IN AIRCRAFT -
Qualification Organisation Grant / Extension of a - FOR USE IN AIRCRAFT - Qualification Label. Valid for the following child restraint system: Child Restraint System Identification -Number kiddy ID: 0000051233
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrDer Umweltgutachter Dr. Andreas Riss bestätigt hiermit, dass die Nr. 5 / 2014030419-1 Robert Bosch GmbH Standort Feuerbach (Stuttgart-Feuerbach, -Bad Cannstadt, -Zuffenhausen), Haupt- und Außenstandorte
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen
MehrZERTIFIKAT. Kraftanlagen München GmbH ISO 9001:2008. Ridlerstraße 31c 80339 München Deutschland
ZERTIFIKAT Die Zertifizierungsstelle der TÜV SÜD Management Service GmbH bescheinigt, dass das Unternehmen Ridlerstraße 31c einschließlich der Standorte und Geltungsbereiche gemäß Anlage ein Qualitätsmanagementsystem
MehrKraftfahrt-Bundesamt DE Flensburg
EWG - BAUARTGENEHMIGUNG (EWG-BG) EEC - Component type-approval certificate gemäß der Verordnung (VO) (EWG) Nr. 3821/85 des Rates vom 20. Dezember 1985 geändert durch (VO) (EU) Nr. 1161/2014 über das Kontrollgerät
MehrPrüfbericht Nr. / Test Report No: F (Edition 1)
Emission date: 22.01.2015 Page: 1 of 5 Prüfbericht Nr. / Test Report No: F4-44254-48401-01 (Edition 1) Auftraggeber Applicant Geräteart Type of equipment Typenbezeichnung Type designation Seriennummer
MehrCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. Scope: Design, build, finance and operation of
MehrApparatebau State of the Art
Apparatebau State of the Art Erfahrung ist Wissen Als mittelständisches Unternehmen bauen wir seit 1972 Apparate und Sonderkonstruktionen für die chemische, die petrochemische Industrie sowie für den Anlagenbau.
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen
Mehr- FOR USE IN AIRCRAFT -
Qualification Organisation LF/C/013/11 EXT2 Grant / Extension of a - FOR USE IN AIRCRAFT - Qualification Mark. Valid for the following child restraint system: Child Restraint System Identification -Number
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Elektronischer Schalter, Zeitschalter Electronic switch,
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Netzteil für IT-Geräte / DC/DC-Wandler Power supply for IT-Equipment / DC/DC-Converter
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. USV-Zubehör UPS-Accessories Typ(en) / Type(s): A) PDM35xxIEC-yyy B) PDM13xxIEC-yyy
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... Steckverbinder (COC) Connector (COC) Standard Timer Typ(en) / Type(s) Female part Housing 0-2178600-2/
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Warmwasserspeicher, geschlossen Storage water heater,
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Datenverarbeitungsgerät Information Technology Equipment
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. DEHNguard M Typ(en) / Type(s) DG M TN 275; DG M TN 275
MehrValid for confirmation of protection type:
Hinweis zu den beiliegenden Ex-Zertifikaten ( z.b. Baumusterprüfbescheinigung ) Information regarding Ex certificates ( i.e. type-examination certificate) Da die offiziellen Zertifikate auf den jeweiligen
MehrSERVICE INFORMATION NO. SID4-020/1
Diamond Aircraft Industries G.m.b.H. DAI SID4-020/1 N.A. Otto-Straße 5 Page 1 of 2 A-2700 Wiener Neustadt 06-Sep-2004 SERVICE INFORMATION NO. SID4-020/1 SUPERSEDES SERVICE INFORMATION NO. SID4-020 I. TECHNICAL
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Einbauteil für IT Geräte Component for IT equipment (Rack
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Typ(en) / Type(s) ) Q.PRO L-GY XXX ) B.LINE PRO L-GY XXX ) Q.PLUS
MehrIFM-Institut für Fahrzeugtechnik und Mobilität. Report. No. S Comparison of RDE evaluation software
Report Comparison of RDE evaluation software TÜV NORD Mobilität GmbH und Co. KG, Essen Institut für Fahrzeugtechnik und Mobilität Drivetrain / Emissions Passenger cars / Motorcycles Adlerstr. 7 45307 Essen,
MehrFlow through sight glasses Nr. 440/450
Flow through sight glasses Nr. 4/450 Durchfluss-Schaugläser in Eckform (Nr. 4) und Dreiwegeform (Nr. 450) mit Flanschanschluss bis Gehäuse in Schweißkonstruktion mit Einlaufstutzen, beiderseits Schauglasplatten
Mehrfischerwerke GmbH & Co. KG Klaus-Fischer-Straße 1 72178 Waldachtal Deutschland
ZERTIFIKAT Hiermit wird bescheinigt, dass mit den im Anhang gelisteten Standorten ein Umweltmanagementsystem eingeführt hat und anwendet. Geltungsbereich: Entwicklung, Produktion und Vertrieb von Kunststoff-,
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... 1 PX0736/P 2 PX0736/S 3 PX0735/P 4 PX0735/S 5 PX0737/P 6 PX0737/S 7 PX0757/P 8 PX0757/S 9 PX0764/P 10 PX0764/S
MehrCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. Scope: Development, Production, Marketing and Sales
MehrVDE Prüf- und Zertifizierungsinstitut
VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 63069 Offenbach Microchip Technology Inc. Vestre Rosten 79 7075 TILLER Norway Offenbach, 2017-07-27 Ihr
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Anbauleuchte für Leuchtdioden (LED) Built-on luminaire
MehrDIN EN ISO 9001:2008 Der Nachweis der regelkonformen Anwendung wurde erbracht und wird gemäß TÜV PROFiCERT-Verfahren bescheinigt für
für das Managementsystem nach Der Nachweis der regelkonformen Anwendung wurde erbracht und wird gemäß TÜV PROFiCERT-Verfahren bescheinigt für Geltungsbereich: Werkzeugbau, Blechbearbeitung, Herstellung
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Mehrfachsteckdose, ortsveränderlich Socket-outlet, multiple
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Elektronisches Vorschaltgerät für Hochdruck-Entladungslampen Electronic
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Steckdose Socket-outlet Typ(en) / Type(s): 6211..EMS Si/I
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Zubehör für Netzgeräte Accessories for power supplies Triple insulated winding
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Zubehör für Netzgeräte Accessories for power supplies Triple insulated winding
MehrVDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... Netzteil für IT-Geräte / DC/DC-Wandler Power supply for IT-Equipment / DC/DC-Converter Typ(en)
Mehr