Datenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs

Größe: px

Ab Seite anzeigen:

Download "Datenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs"

Gundi Lehmann
vor 6 Jahren
Abrufe

2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up

..20 ma with an accuracy of 0.05% of the measurement-range end value.

The measurement range is defined channel-by-channel using parameterisation.

The outputs are supplied from the output current path (U OUT ).

1 2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, V, V, V, V, ma or ma with an accuracy of 0.05% of the measurement-range end value. An actuator with 2-, 3- or 4-wire technology can be connected to each plug-in connector. The measurement range is defined channel-by-channel using parameterisation. In addition, each channel has its own status LED. The outputs are supplied from the output current path (U OUT ). General ordering data Type Order No Version Remote I/O module, IP20, Analog signals, Output, 4-channel, Current/Voltage GTIN (EAN) Katalogstand / Technische Änderungen vorbehalten 1

2 Dimensions and weights Length 76 mm Length (inches) inch Width 11.5 mm Width (inches) inch Height 120 mm Height (inches) inch Depth 76 mm Depth (inches) inch Mounting dimension - height 128 mm Net weight g Temperatures Operating temperature -20 C C Storage temperature -40 C C analogue outputs Accuracy Actuator connection 2-wire (current and voltage), 3- and 4- ±0,1 % FSR max., 0,05 % FSR typ. wire (voltage), 2-wire (automatic detection) Cross-talk between the channels % FSR Individual channel diagnosis No Max. error between T min. and T max. 220 ppm FSR Module diagnosis Yes Monotonicity Yes Number 4 Output variable Voltage (0 5 V, 0 10 V, Repeat accuracy 1 5 V, 2 10 V, ±10 V, ±5 V), Current (0 20 ma or 4 20 ma) < 1 mv eff. Resolution 16 Bit Response time 1 ms / 4 channels Short-circuit-proof Temperature coefficient 20 ppm voltage / 31 ppm Yes current measurement / K Type 1. U (0 5 V, 0 10 V, 1 5 load impedance current V, 2 10 V, ±10 V), 2. I (0 20 ma or 4 20 ma) < 600 Ω load impedance voltage > 1 kω (at > 50 C ambient temperature, max. total sensor current = 25 ma) Connection data Type of connection Wire connection cross section, finely PUSH IN stranded, max. 1.5 mm² Wire connection cross-section, finely stranded, min mm² Wire cross-section, finely stranded, max. (AWG) AWG 16 Wire cross-section, finely stranded, min. Wire cross-section, solid, max. (AWG) AWG mm² Wire cross-section, solid, max. (AWG) AWG 16 Wire cross-section, solid, min mm² Wire cross-section, solid, min. (AWG) AWG 26 Katalogstand / Technische Änderungen vorbehalten 2

3 General data Air humidity (operation) 1013 hpa (height 0 m) to 700 hpa (height 3000 m) Air humidity (storage) Air humidity (transport) Air pressure (operation) 795 hpa (height 2000 m) Air pressure (storage) Air pressure (transport) 1013 hpa (height 0 m) to 700 hpa (height 3000 m) Pollution severity Shock 15 g über 11 ms, halbe Sinuswelle, gem. IEC Surge voltage category II Test voltage 500 V UL 94 flammability rating Vibration resistance 5 Hz f 8.4 Hz: 3.5 mm amplitude as per IEC , 8.4 Hz f 150 Hz: 1 g acceleration V-0 as per IEC Power supply Current consumption from I IN (power segment of the field bus coupler), typ. Supply voltage 8 ma 24 V DC +20%/ -15%, via the system bus Current consumption from I OUT (the respective power segment) 85 ma System data Diagnostic data Field bus protocol CANopen, DeviceNet, EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET IRT, PROFIBUS DP-V1, 1 Bit POWERLINK Galvanic isolation DC 500 V between current Interface paths u-remote system bus Module type Analogue output module Parameter data 12 Byte Process data 8 Byte Transmission speed of system bus, max. 48 Mbit Classifications ETIM 4.0 EC ETIM 5.0 EC ETIM 6.0 EC eclass eclass eclass eclass eclass Product information Descriptive text accessories 1 roll = 1000 label = 1 Qty. 1 sheet = 60 label = 1 Qty. Katalogstand / Technische Änderungen vorbehalten 3

4 Approvals Approvals ROHS Conform Downloads Engineering data Manual Declaration of Conformity Firmware EPLAN, WSCAD, Zuken E3.S UR20_Manual_u-remote_EN_DE Declaration_of_Conformity Firmware UR20-4AO-UI Katalogstand / Technische Änderungen vorbehalten 4

5 Zeichnungen Katalogstand / Technische Änderungen vorbehalten 5

Ähnliche Dokumente

BL compact fieldbus station for DeviceNet 4 Analog Inputs for Current or Voltage and 4 Analog Outputs for Voltage BLCDN-4M12S-4AI4AO-VI

BL compact fieldbus station for DeviceNet 4 Analog Inputs for Current or Voltage and 4 Analog Outputs for Voltage BLCDN-4M12S-4AI4AO-VI On-Machine compact fieldbus I/O blocks DeviceNet slave 125/250/500 kbps Two 5-pin M12 male receptacles for fieldbus connection 2 rotary coding switches for participant-address IP69K M12 I/O ports LEDs