Hard Disk Drive Duplicator Dock USB 3.0 to SATA HDD Duplicator

Transkript

1 Hard Disk Drive Duplicator Dock USB 3.0 to SATA HDD Duplicator Product ID: SATDOCK22RU3 The SATDOCK22RU3 USB 3.0 to SATA Hard Drive Duplicator Dock can be used as a standalone SATA hard drive duplicator, or as a USB 3.0 SATA hard drive docking station, enabling you to duplicate/clone an existing hard drive without the use of a host computer system or access docked hard drives as though they were installed within the computer system. In Duplicator Mode, it creates an exact 1-to-1 sector clone from one hard drive to another, including partition and boot sector information and all data, at a rate of ~72MB/second, ensuring data integrity and consistency for sensitive operations (data recovery, etc.). In Dock Mode, it can be connected to your host computer through USB 3.0, supporting up to 5 Gbps of bandwidth from both hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.

2 The value of this hard drive docking station can be further extended through a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.

3 Certifications, Reports and Compatibility Applications Disk sector imaging/cloning to create an exact replica of a source drive onto another hard drive Create identical backups for when data integrity is crucial, such as in data recovery and forensic applications Technicians who require access to bare hard drives for backup/recovery purposes or needs to swap between drives regularly Quickly access data from a drive, without having to install it internally or into an enclosure Features Standalone Sector by Sector copying including the HPA SuperSpeed USB 3.0 host interface, with support for data transfer rates up to 5 Gbps Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD) LED progress bar for duplication status Compact, desktop-style form factor Hot-Swap and Plug-and-Play compatible

4 Warranty 2 Years Hardware Anzahl von Laufwerken 2 Bustyp USB 3.0 Chipset-ID Laufwerkgröße Laufwerkinstallation Laufwerktyp Lüfter JMicron - JMS in & 3.5in Entnehmbar SATA Nein Schnittstelle USB 3.0 Leistung Max. Laufwerkkapazität Currently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) and 1TB 5400 RPM 2.5" hard drives (2TB total) Typ und Rate USB Gbit/s SATA II (3 Gbps) Steckverbinder Hostanschlüsse 1 - USB Type-B (9-polig) USB 3.0 Buchse Laufwerksteckverbinder 2 - SATA Daten und Strom, Combo (7+15-polig) Steckdose Software Betriebssystemkompatibilität Windows XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8 (32/64-bit) Mac OS 10.4/ 10.5/ 10.6/ 10.7/ 10.8 Linux Spezielle Hinweise/Anforderungen Hinweis For duplication, the destination drive must be of equal or greater capacity than the source drive. If the source drive contains an EISA (Extended Industry Standard Architecture) partition, the EISA partition needs to be removed prior to beginning the duplication. Anzeiger LED-Anzeiger 1 - Duplication Progress (Blue) 1 - Power (Green) 2 - Drive Power/Activity (Blue) Strom Ausgangsspannung 12 DC Ausgangsstrom Eingangsspannung 4A 110V-240V AC Eingangsstrom 1.2A

5 Mit Stromadapter Polarität der Mittelspitze Steckertyp Mit Netzadapter Positiv N Umwelt Betriebstemperatur 0 C to 85 C (32 F to 185 F) Feuchtigkeit Lagertemperatur 5% ~ 90% RH -10 C to 95 C (14 F to 203 F) Physische Eigenschaften Farbe Schwarz Gehäusetyp Produktbreite Kunststoff 4.1 in [103 mm] Produktgewicht 19.8 oz [562 g] Produkthöhe Produktlänge 2.4 in [62 mm] 5 in [128 mm] Verpackungsinformationen Paketmenge 1 Versandgewicht (Verpackung) 24.7 oz [700 g] Verpackungsinhalt Im Paket enthalten 1 - Hard Drive Duplicator 1 - USB 3.0 Cable 1 - Power Adapter 1 - Instruction Manual Product appearance and specifications are subject to change without notice.