Table of Contents. Table of Contents Building management systems Industrial wiring installation EST 4 Programmable miniature control systems (24V)

Größe: px

Ab Seite anzeigen:

Download "Table of Contents. Table of Contents Building management systems Industrial wiring installation EST 4 Programmable miniature control systems (24V)"

Hartmut Junge
vor 6 Jahren
Abrufe

1 Table of Contents Table of Contents Building management systems EST 4 Programmable miniature control systems (24V) Lucas Nülle GmbH Page 1/5

Building management systems Training systems / trainers for electrical wiring/building management systems: Protective circuitry, protective measures, building mains feed, lighting and intercom

2 Building management systems Training systems / trainers for electrical wiring/building management systems: Protective circuitry, protective measures, building mains feed, lighting and intercom systems Industrial wiring, intercoms, alarm systems, hazard alarms and access control KNX/EIB, LON Project work, technical practice, assembly practice systems, planning software Not only domestic properties need to be wired up, but commercial and industrial properties need electrical installation too. Trainees on this course will learn how to install industrial components in switching cabinets or industrial machinery. Key points include the logic for control and automation technology, installation of cables and wiring and the programming of small-scale control systems. Lucas Nülle GmbH Page 2/5

EST 4 Programmable miniature control systems (24V) EST 4 Programmable miniature control systems (24V) Elementary principles for programming miniature control systems are imparted on the basis of

3 EST 4 Programmable miniature control systems (24V) EST 4 Programmable miniature control systems (24V) Elementary principles for programming miniature control systems are imparted on the basis of classical control technology and digital technology. These exercises serve as preparation for training in automation technology and conclude the chapter on industrial installations. The miniature controls possess their own display, thus eliminating the need for a PC during programming. The following topics are dealt with: Programming of basic functions Programming of timing elements Complex control tasks Lucas Nülle GmbH Page 3/5

4 Equipment set comprising the following: Alternativausstattung wie vorher jedoch inklusive AM2-Modul********* Pos. Product name Bestell-Nr. Anz. 1 LOGO!8 board including LOGO and DM8 modules, IP interface, 24 V/1 A,12 digital inputs, 4 analog inputs, 8 digital outputs CO3209-1U 1 The LOGO universal board is equipped with a LOGO!8 module and a DM8 supplementary module. This means it is possible to implement all the basic circuits in topic range 4. The equipment is connected to the mains via an appliance plug and its built-in power supply module provides all the voltages necessary for the following components. The board can also be supplemented with other components. The inputs are assigned to switches, buttons or external signals. The outputs are all equipped with floating switch contacts. Technical data: Supply: wide-range power supply, V AC Power supply to components: fixed voltage, 24 V/1 A, 2 x Adjustable voltage ranges: V/0.1 A Input terminals: LOGO+DM8, max. 12 digital inputs, 4 of which can be configured as analog inputs Inputs wired with 12 input sockets, 2 potentiometers, 10 switches/buttons IP input: RJ45 Output terminals: LOGO+DM8, max. 2 x 4 digital outputs, floating Output terminals: max. 2 analog outputs or ASi, EIB (LOGO! components can also be added later on) IMS system connector D-SUB 9-pin Certification: CE, UL, FM, ESB Inputs/outputs: 2-mm/4-mm safety sockets Dimensions: 297 x 224 x 160mm Weight: 1.5kg Lucas Nülle GmbH Page 4/5

5 2 LOGO!8-Board inkl. LOGO 24V, DM8, AM2-Modul, IP- Schnittstelle,12DI,4AI,8DO,2AO CO3209-1W 1 Das LOGO-Universalboard ist bestückt mit der LOGO!8 und den Zusatzmodulen DM8 und AM2 AQ. Damit sind alle Grundschaltungen des Lernfeld 4 realisierbar Das Gerät wird über einen Gerätestecker an Netzspannung angeschlossen und stellt über ein eingebautes Netzteil alle notwendigen Spannungen für die nachfolgenden Komponenten zur Verfügung. Das Board kann mit weiteren Komponenten ergänzt werden. Die Eingänge werden mit Schalter, Tastern oder durch externe Signale belegt. Die Ausgänge sind potentialfreie Schaltkontakte. Technische Daten: Versorgungsspannung: Weitbereichsnetzteil V AC Komponentenspannungsversorgung: Festspannung 24V / 1A, 2 x regelbare Spannungen: V/ 0,1A EingangsklemmenLOGO+DM8: max. 12 DI,davon als 4AI nutzbar, Eingänge beschaltet mit 12 Eingangsbuchsen, 2 Potentiometern, 10 Schalter/Taster IP Eingang: RJ45 Ausgangsklemmen LOGO+DM8: max. 2x4DO, potenzialfrei, Ausgangsklemmen: 2AO V oder mA IMS Systemanschluss D-SUB 9-polig Zulassungen: CE, UL, FM, ESB Ein- Ausgänge: 2mm / 4mm-Sicherheitsbuchsen Abmessungen: 297 x 224 x 160mm Gewicht: 1,5kg Lucas Nülle GmbH Page 5/5

Ähnliche Dokumente

Table of Contents. Table of Contents Gebäudesystemtechnik Industrielle Installationstechnik EST 4 Programmierbare Kleinsteuerungen "LOGO - 24V"

Table of Contents. Table of Contents Gebäudesystemtechnik Industrielle Installationstechnik EST 4 Programmierbare Kleinsteuerungen LOGO - 24V Table of Contents Table of Contents Gebäudesystemtechnik Industrielle Installationstechnik EST 4 Programmierbare Kleinsteuerungen "LOGO - 24V" 1 2 2 3 Lucas Nülle GmbH Seite 1/8 https://www.lucas-nuelle.de