PROJECT PRO 2009 NATURAL STONE BUILDERS
NATURAL STONE BUILDERS Iris Ceramica spa Via Ghiarola Nuova, 119 41042 Fiorano Modenese (Mo), Italy tel. +39 0536 862111 fax +39 0536 862452 e-mail:mktg@irisfmg.com www.irisfmg.com
SCALE STEPS ESCALIERS TREPPEN ESCALAS 2 3
GRADINO 4 5
6 7
8 9
10 11
12 13
14 15
SCALINO BORDO 16 17
18 19
20 21
22 23
24 25
SCALINO TORO 26 27
28 29
30 31
32 33
34 35
36 37
SCALINO COSTA RETTA 38 39
40 41
42 43
44 45
46 47
48 49
BORDI VASCA TUB SIDES BORDS DE LA BAIGNOIRE BADEWANNENRÄNDER BORDES DE LA BAÑERA 50 51
52 53
54 55
56 57
58 59
60 61
62 63
64 65
66 67
68 69
70 71
72 73
74 75
76 77
78 79
80 81
82 83
TOP LAVABO SINK COUNTERTOP PLAN DE VASQUE WASCHTISCHABDECKUNG REVESTIMIENTO DEL LAVABO 84 85
86 87
88 89
90 91
92 93
94 95
96 97
98 99
100 101
102 103
104 105
DECORAZIONI INTARSIATE INLAID DECORATIONS DÉCORATIONS MARQUETÉES INTARSIENDEKORATION DECORACIONES TARACEADAS 106 107
108 109
110 111
112 113
114 115
116 117
118 119
120 121
122 123
124 125
126 127
128 129
130 131
132 133
134 135
136 137
138 139
140 141
142 143
144 145
146 147
148 149
150 151
152 153
154 155
156 157
158 159
160 161
162 163
164 165
166 167
168 169
170 171
172 173
174 175
176 177
178 179
180 181
182 183
184 185
186 187
DECORAZIONI SABBIATE SANDED DECORATIONS DÉCORATIONS SABLÉES SANDSTRAHLDEKORATION DECORACIONES ARENADAS 188 189
190 191
192 193
194 195
196 197
CARATTERISTICHE TECNICHE / TECHNICAL FEATURES / CARACTERISTIQUES TECHNIQUES / TECHNICHE EIGENSCHAFTEN Proprietà fisico-chimiche Physical-chemical properties Propriétés physico-chimiques Physisch-chemische Eigenschaften Dimensioni Sizes Dimensions Abmessungen Resistenza all abrasione profonda Deep abrasion resistance Résistance à l abrasion profonde Beständigkeit gegen tiefenabrieb Resistenza alla flessione Flexion resistance Résistance à la flexion Biegungsfestigkeit Assorbimento d acqua Water absorbtion Absorption d eau Wasserhaufnahme Resistenza al gelo Frost resistance Résistance au gel Frostwiderstandsfähigkeit Tipo di prova Standard of Test Norme du Test Testnorm ISO 10545.2 Valore prescritto Required value Valeur prescrite Vorgeschriebener Wert Lunghezza larghezza - Length and width Longueur et largeur - Länge und Breite Spessore - Thickness - Epaisseur - Stärke Rettilinearità spigoli - Linearity Rectitude des arêtes - Kantengeradheit Ortogonalità - Wedging - Orthogonalité Rechtwinkligkeit Planarità - Warpage - Planéité - Ebenflächigkeit ± 0,6% max ± 5% max ± 0,5% max ± 0,6% max ± 0,5% max 198 199 Valore medio Mean value Valeur moyenne Mittelwert ± 0,2% max ± 2% max ± 0,2% max ± 0,2% max ± 0,2% max ISO 10545.6 Volume 175 mm 3 120 mm 3 ISO 10545.4 Carico di rottura 1300N Breaking strength Charge de ropture Bruchkraft Modulo di rottura 35N/mm 2 Breaking modulus Module de rupture Bruchmodul 55 N/mm 2 (561 Kg/cm 2 ) 2500N ISO 10545.3 0,5% 0,04% max *** ISO 10545.12 Non devono presentare rotture o alterazioni apprezzabili della superficie Must not produce noticeable alteration to surface Ne doivent pas présenter des ruptures ou altérations trop importantes de la surface Oberflächen dürfen, keinen Bruch oder Schaden aufweisen Non gelive* Frost-proof * Non gélives* Frostsicher* DIN 51130 R9 Superficie prelevigata Pre-polished surfaces Surface prépolie Oberfläche vorgeschliffen DIN 51097 A+B Superficie anticata/ burattata e slate Antiqued/tumbled and slate surfaces Sur face antique/bosselé et slate Oberfläche antik/getrommelt und slate R10 Superficie anticata/ burattata e slate Antiqued/tumbled and slate surfaces Surface antique/bosselé et slate Oberfläche antik/getrommelt und slate A+B+C Superficiebocciardata/ strutturata Flamed surfaces/structured Sur face bouchardée/structuré Oberfläche strukturiert R11 Superficie bocciardata/ strutturata (slate-solo Parana) Flamed surfaces/structured (slate-parana Only) Surface bouchardée/structuré (slate-uniquement Parana) Oberfläche strukturiert (slate-nur Parana) Classificazione secondo norme CEN gruppo BI EN 176 e ISO 13006 All.G gruppo BI a Classification in accordance with CEN standards BI EN 176 and ISO 13006 All.G standards BI a Classification selon les normes CEN groupe BI EN 176 et ISO 13006 All.G groupe BI a Klassifizierung gemäß CEN Normen Gruppe BI EN 176 und ISO 13006 All.G gruppe BI a ***I prodotti con assorbimento <0,5 sono classificati secondo le norme UNI CEN Fully vitrified tiles e secondo le norme ASTM Imprevious tiles *** The products having an absorption <0,5 are classified according to the UNI CEN standards Fully vitrified tiles and according to the ASTM standards Impervious tiles.
Proprietà fisico-chimiche Physical-chemical properties Propriétés physico-chimiques Physisch-chemische Eigenschaften Coeficente di dilatazione termica lineare Coefficient of linear thermal-expansion Coefficient linéaire de dilatation thermique Lineare Wärmeausdehnung Resistenza dei colori alla luce Color resistance to light Résistance de la couleur à la lumiere Lichtbeständigkeit Resistenza ai prodotti chimici Chemical resistance Résistance aux produits chimiques Chemikalienfestigkeit Resistenza alle macchie Stain resistance Résistance aux taches Fleckenbeständigkeit Coeficente di attrito (scivolosità) Friction coefficient (slipperiness) Coefficient de friction (glissement) Reibungskoeffizient (schlüpfrigkeit) Tipo di prova Standard of Test Norme du Test Testnorm Valore prescritto Required value Valeur prescrite Vorgeschriebener Wert Valore medio Mean value Valeur moyenne Mittelwert ISO 10545.8 9X10-6 0 K -1 6,5X10-6 0 K -1 DIN 51094 ISO 10545.13 Non devono presentare apprezzabili variazioni di colore Must not produce noticeable colour variation Ne doivent présenter des variations remarquables de la couleur Keine sichtbare Farbänderung ist erlaubt Non devono presentare apprezzabili segni di attacco chimico Must not produce noticeable signs of chemical attack Ne doivent pas présenter des signes trop évidents à l attaque chimique Sie dür fen keine sichtlichen Zeichen einer chemischen Zersetzung vor weisen Campioni inalterati in brillantezza e colore No change in brightness or colour of samples Echantillons inchangés en brillance et couleur Glanz und Farbe der Muster unverändert Non attaccate Not attacked Non attaquées Nicht angegriffen ISO 10545.14 1 < X < 5 CLASSE 5 macchie rimosse con acqua corrente calda (senza detergente)** Stains removed by hot running water (without detergent) Taches enlevées à l eau courante chaude (sans dètergent) Fleckenentfernung mit Fliessendem Warmen Wasser (ohne Reinigungsmittel) BCRA REP CEC 6/81 Attrito soddisfacente Satisfactory friction Friction satisfaisante Befriedigende Reibung 0,42-0,75* *** Les produits avec absorption <0,5 sont classifiés selon les normes UNI CEN Fully vitrified tiles et selon les norms ASTM Imper vious tiles. *** Die Er zeugnisse mit einer Absorption <0,5 sind gemäß den UNI CEN - Normen Fully vitrified tiles und gemäß den ASTM - Normen Impervious tiles klassifiziert. *Varia a seconda della finitura di superficie / *It can var y according to the surface finish / *Varie selon la finition de la surface / *Die Rütschfestigkeit wird dur ch die Beschaffenheit der Oberfläche bestimmt. AMERICAN STANDARDS Phisical properties Test Industry standards FMG results (as tested by Smith Emery laboratory) Water absorbtion ASTM C-373 Tile shall be impervious <0,05% Sizes ASTM C-499 Average facial dimension <1,5% Wedging ±1% Warpage ±1% of any edge Range of thickness (inch.) <0,04% 0,15% 0,33% 0,17% 0,014% Abrasive resistance ASTM C-501 100 217 Freeze hardness ASTM C-1026 No sample must show Resistant alterations to surface Chemical resistance ASTM C-650 To 10% HCL Acid - No sample must show visible signs of chemical attack to 10% KOH Alkali Unaffected Breaking strength ASTM C-648 250 PSI or greater Exceeds standards >460 PSI Skid resistance (average coefficient of friction) ASTM C-1028 Meets or exceeds requirements (please ask for individual test report) ** solo per finitura prelevigata - for prepolished finish only - uniquement pour finition prépolie - nur für matte Oberflachen 200 201
IRIS Ceramica Spa - Div. FMG FABBRICA MARMI E GRANITI Via Ghiarola Nuova, 119-41042 Fiorano Modenese (MO) - Italia EN 14411 PER INFORMAZIONI RELATIVE AI DATI TECNICI SU MARCATURA CE VEDERE IL SITO www.irisfmg.com PLEASE REFER TO OUR WEB SITE www.irisfmg.com FOR TECHNICAL INFORMATION RELATED TO CE LABELING. POUR TOUT RENSEIGNEMENT SUR L'AVIS TECHNIQUE DE LA MARQUE CE VEUILLEZ CONSULTER LE SITE www.irisfmg.com INFORMATIONEN BEZUEGLICH TECHNISCHER DATEN ZUR BESCHRIFTUNG CE ENTNEHMEN SIE UNSERER WEBSITE www.irisfmg.com Copyright Iris Ceramica - Società per Azioni - Anno 2008/2009
Iris Ceramica spa Via Ghiarola Nuova, 119 41042 Fiorano Modenese (Mo), Italy tel. +39 0536 862111 fax +39 0536 862452 e-mail:mktg@irisfmg.com www.irisfmg.com PC0132