ZERTIFIKAT Die Zertifizierungsstelle der TÜV SÜD Management Service GmbH bescheinigt, dass das Unternehmen einschließlich der Standorte und Geltungsbereiche gemäß Anlage ein Managementsystem für Sicherheit, Gesundheitsschutz und Umweltschutz eingeführt hat und anwendet. Durch ein Audit, Bericht-Nr. 70015511, wurde der Nachweis erbracht, dass die Forderungen an das normative Regelwerk Sicherheits Certifikat Contractoren (SCC P Version 2011) erfüllt sind. Dieses Zertifikat ist gültig vom 07.06.2018 bis 06.06.2021. Zertifikat-Registrier-Nr.:. Mit dem Nachweis des Standards SCC P ist auch der Nachweis der Standards SCC* / SCC** gegeben. München, 09.07.2018 Seite 1 von 3
Anlage zur Zertifizierungsurkunde Nr.: Standorte Geltungsbereich Wahrnehmen von für die Planung, Entwicklung, Herstellung, Errichtung und Instandhaltung von Anlagen und Anlagenkomponenten für für die. Betrieb München Planung, Entwicklung, Herstellung, Errichtung und Instandhaltung von Anlagen und Anlagenkomponenten für Betrieb Moosinning Am Bleichbach 10 85452 Moosinning Support für die Herstellung, Errichtung und Instandhaltung von Anlagen und Anlagenkomponenten für Niederlassung Heidelberg Im Breitspiel 7 69126 Heidelberg Planung, Errichtung und Instandhaltung von Anlagen und Anlagenkomponenten für, Brandschutzanlagen sowie ECM Ingenieur-Unternehmen für Energie und Umwelttechnik GmbH Planung und Entwicklung von Anlagen und Anlagenkomponenten für - Erdverlegten Rohrleitungsbau München, 09.07.2018 Seite 2 von 3
Anlage zur Zertifizierungsurkunde Nr.: Standorte Geltungsbereich Kraftanlagen Romania SRL Bulevardul Bucuresti Nr. 66 100520 Ploiesti Rumänien Planung, Herstellung, Errichtung und Instandhaltung von Anlagen und Anlagenkomponenten für Finow Rohrsysteme GmbH Angermünder Str. 101 16225 Eberswalde Planung und Herstellung von Anlagenkomponenten und Anlagen für sowie München, 09.07.2018 Seite 3 von 3
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that including the sites and scope of application see enclosure has established and applies an Occupational Safety, Health and Environmental Management System. An audit was performed, Report No. 70015511. Proof has been furnished that the normative requirements according to Sicherheits Certifikat Contractoren (SCC P Version 2011) are fulfilled. The certificate is valid from 2018-06-07 until 2021-06-06. Certificate Registration No.:. Validation of the standard SCC P also ensures validation of the standard SCC* / SCC**. Munich, 2018-07-09 Page 1 of 3
Enclosure of Certificate Registration No.: Sites Scope of application Betrieb München Betrieb Moosinning Am Bleichbach 10 85452 Moosinning Performance of central functions for planning, development, manufacturing, installation and maintenance of plants and plant components for. Planning, development, manufacturing, installation and maintenance of plants and plant components for Support for manufacturing, installation and maintenance of plants and plant components for Niederlassung Heidelberg Im Breitspiel 7 69126 Heidelberg Planning, installation and maintenance of plants and plant components for, fire protection systems as well as ECM Ingenieur-Unternehmen für Energie und Umwelttechnik GmbH Planning and development of plants and plant components for - underground piping systems Munich, 2018-07-09 Page 2 of 3
Enclosure of Certificate Registration No.: Sites Kraftanlagen Romania SRL Bulevardul Bucuresti Nr. 66 100520 Ploiesti Romania Scope of application Planning, manufacturing, installation and maintenance of plants and plant components for Finow Rohrsysteme GmbH Angermünder Str. 101 16225 Eberswalde Planning and manufacturing of plants and plant components for as well as Munich, 2018-07-09 Page 3 of 3