Christof Erban Promevendus TU Delft Assistant researcher at ISE Freiburg Senior researcher at Meyer Burger Photovoltaik im Gebäudebereich - neue normative Grundlagen Köln, 13 November 2015 28 Nov. 2013 Christof Erban, Montage von rahmenlosen PV-Modulen 1 Fotos: Jan-Oliver Kunze, LIN
Zusammenfassung EN 50583 Photovoltaics in buildings ist angenommen EN 50583 Photovoltaics in buildings enthält die Teile -1 Module -2 Systeme EN 50583 Photovoltaics in buildings definiert BIPV EN 50583 Photovoltaics in buildings definiert fünf unterschiedliche Anwendungsbereiche Sloped, roof-integrated, not accessible from within the building Sloped, roof-integrated, accessible from within the building Non-sloped (vertically) mounted not accessible from within the building Non-sloped (vertically) mounted accessible from within the building Externally integrated, accessible or not accessible from within the building 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 2
Sind die Module gebrauchstauglich Ermittlung der Windlast DIN EN 1991-1-4 IEC 61730 ca. 120 Seiten ca. 1/3 Seiten 2400 Pa 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 3
Wie belastbar ist ein Material (Glas) Glas im Bauwesen Photovoltaik Prüfung des Materials zur Ermittlung von charakteristischen Kennwerten Bauteilprüfung eines definierten Moduls Berücksichtigt: Glasoberfläche Weiterverarbeitung Bohrungen, etc. Standardisierte Last 2400 Pa oder 5400 Pa Statistik Gilt für alle Gläser Zertifikat charakt. Materialkennwerte Gilt ausschließlich für das getestete Produkt 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 4
Sind die Module gebrauchstauglich 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 5
Anforderungen an Photovoltaikmodule 1954 - Erste Silizium Solarzellen verfügbar 1974 - Erste terrestrische PV verfügbar 1976 - Erste Anforderung an PV wurden in den JPL Block buys formuliert 1977 - Erste Empfehlungen durch das Lewis Research Center, Terrestrial photovoltaic measurement procedures for the Energy Research and Development Administration 1981 - Performance of Solar Energy Convertes, ESTI specification 501 Heute - IEC 61215, IEC 61646, IEC 61730, etc 2012 - DIBt - Hinweise für die Herstellung, Planung und Ausführung von Solaranlagen. (Photovoltaik sind ungeregelte Bauprodukte) Okt. 2015 - pren 50583 Photovoltaics in buildings ist angenommen 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 6
EN 50583 Photovoltaics in buildings ist angenommen EN 50583-1 Photovoltaics in buildings, Teil 1: - Module 18/0 Yes/No AT*, BE, BG, CH*, CZ, DE, ES, FI, FR*, GB, IT, LT, NL, NO, PL, PT*, RO, SI * with comments EN 50583-1 Photovoltaics in buildings, Teil 2: - Systeme 19/0 Yes/No AT*, BE, BG, CH*, CZ, DE, ES, FI, FR*, GB, IT, LT, NL, NO, PL, PT*, RO, SI, TR * with comments 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 7
EN 50583 Photovoltaics in buildings warum...? Umweltarena, Spreitenbach Quelle: Meyer Burger AG Autohaus Betz Marbach Atrium Fraunhofer ISE, Freiburg Bundesjustizministerium Berlin Produktionshalle Schott, Alzenau Quelle: Photon International 2/2006 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 8
EN 50583 Photovoltaics in buildings warum...? Building-integrated Integrated photovoltaic modules; BIPV modules photovoltaic modules are considered to be building-integrated, if the PV modules form a construction product providing a function as defined in the European Construction Product Regulation CPR 305/2011. Thus the BIPV module is a prerequisite for the integrity of the building s functionality. If the integrated PV module is dismounted (in the case of structurally bonded modules, dismounting includes the adjacent construction product), the PV module would have to be replaced by an appropriate construction product. The building s functions in the context of BIPV are one or more of the following: mechanical rigidity or structural integrity primary weather impact protection: rain, snow, wind, hail energy economy, such as shading, daylighting, thermal insulation fire protection noise protection separation between indoor and outdoor environments security, shelter or safety Inherent electro-technical properties of PV such as antenna function, power generation and electromagnetic shielding etc. alone do not qualify PV modules as to be building-integrated. 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 9
Anforderungen an Photovoltaics in buildings generell Photovoltaik als elektrisches Betriebsmittel LVD (low voltage directive) Als Teil eines elektrischen System mit schnell schaltenen Schaltelementen EMC (electro magnetic compatibility) 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 10
Anforderungen an Photovoltaics in buildings generell Photovoltaik als elektrisches Betriebsmittel LVD (low voltage directive) Als Teil eines elektrischen System mit schnell schaltenen Schaltelementen EMC (electro magnetic compatibility) Als Gebäudekomponente CPR (construction product regulation) als Beitrag zur Gebäude performance EPBD (European Performance Directive For Buildings ) als elektrisches Betriebsmittel WEEE (European Directive on waste electrical and electronic equipment ) 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 11
EN 50583 Photovoltaics in buildings Teil 1: Module - Anforderungen Generelle Anforderungen Resultieren aus Anfoderungen der LVD und der CPR und sind für alle BIPV Module unabhängig von Material und Einbausituation massgebend Anforderungen res. aus Modulkonstruktion / Material Anforderungen res. aus Modulkonstruktion / Einbausituation 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 12
pren 50583 Photovoltaics in buildings Teil 1: Module - Anforderungen Anforderungen res. aus Modulkonstruktion / Material ja Anforderungskatalog Enthält das Modul Glas (Anhang) nein Enthält das Modul Metalfolien Enthält das Modul Kunstoffdachmembranen Anforderungskatalog Anforderungskatalog Alle anderen Module Zukünftige Normen 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 13
pren 50583 Photovoltaics in buildings Teil 1: Module - Anforderungen Anforderungen res. aus Modulkonstruktion / Einbausituation 5 Kategorien Kategorie A: Sloped, roof-integrated, not accessible from within the building Kategorie B: Sloped, roof-integrated, accessible from within the building Kategorie C: Non-sloped (vertically) mounted not accessible from within the building Kategorie D: Non-sloped (vertically) mounted accessible from within the building Kategorie E: Externally integrated, accessible or not accessible from within the building 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 14
Zusammenfassung EN 50583 Photovoltaics in buildings ist angenommen EN 50583 Photovoltaics in buildings enthält die Teile -1 Module -2 Systeme EN 50583 Photovoltaics in buildings definiert BIPV EN 50583 Photovoltaics in buildings definiert fünf unterschiedliche Anwendungsbereiche Sloped, roof-integrated, not accessible from within the building Sloped, roof-integrated, accessible from within the building Non-sloped (vertically) mounted not accessible from within the building Non-sloped (vertically) mounted accessible from within the building Externally integrated, accessible or not accessible from within the building 13. Nov. 2015 Photovoltaik im Gebäudebereich - neue normative Grundlagen 15
Christof Erban Promevendus TU Delft Assistant researcher at ISE Freiburg Senior researcher at Meyer Burger Photovoltaik im Gebäudebereich - neue normative Grundlagen Köln, 13 November 2015 28 Nov. 2013 Christof Erban, Montage von rahmenlosen PV-Modulen 16 Fotos: Jan-Oliver Kunze, LIN