Produktinformation Product Information Statische Werkzeughalter, Angetriebene Werkzeuge Static Tool Holders, Driven Tools 2015-06-30 GILDEMEISTER CTX beta 500/800 V6 CTX beta 800/1250 Trifix
Inhaltsverzeichnis Table of contents Inhaltsverzeichnis Table of contents Werkzeuganordnung... 4 Tooling equipment CTX beta 500/800 V6-16-fach - VDI 30 NH / NH... 5 CTX beta 500/800 V6 - for 16-positions VDI 30 NH / NH CTX beta 500/800 V6-12-fach <- VDI 40 NH... 12 CTX beta 500/800 V6 - for 12-positions VDI 40 NH CTX beta 800/1250-12-fach - VDI 40 NH... 18 CTX beta 1250 - for 12-positions VDI 40 NH HINWEIS: Die in dieser Produktinformation enthaltenen Informationen beruhen auf den zum Zeitpunkt der Drucklegung vorhandenen Erkenntnissen. Änderungen, die sich im Rahmen der ständigen Weiterentwicklung ergeben, behalten wir uns ausdrücklich vor. Hint The information contained in this Product Information is in confory with the knowledge at the point of printing.subject to modification which occur within the framework of continuous further development. 3
Werkzeugzuordnung Tooling equipment Werkzeugzuordnung Bearbeitung Vor- und Rückwärts Tooling equipment Machining of turning forward and reverse Werkzeugrevolver Tool turret Werkzeugscheibe Tool disk Ausführung Version Ausführung Version Stützstifte Pins Rechts Rechts vorn, hinten in front, behind Präzisionsschnittstelle vorbereitet für VDI Hochgenau SAUTER Trifix Precision interface prepared for VDI highly accurate SAUTER Trifix Werkzeughalter / Angetriebene Werkzeuge Tool holders / Driven tools 90 -Adapter-Duo-Rechts 90 -Adapter with double sided location Werkzeughalter DIN 69880-Form E2 Tool holder Werkzeughalter DIN 69880-Form E2 Tool holder Boring bar holder 90 - Werkzeug-Duo-Rechts Driven tool, 90 -with 2 collet chucks - 90 - Werkzeug-Links Driven tool, 90-90 - Werkzeug-Rechts Driven tool, 90-4
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / l Drehzahl min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed beidseitiger Aufnahme - - Ø 30 133666 133667 with two-sided chuck - - Ø 30 133183 133184 zurückgesetzt Aufnahme rear offset chuck - - Ø 30 - - Ø 30 133668 133124 133669 133125 Klemmung - - Ø 32 133670 Boring bar holder with slotted clamp - - Ø 32 133126 5
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / l Drehzahl min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed Doppel - Klemmung - - Ø 32 133671 Double boring bar with slotted clamp - - Ø 32 133127 intern / internal / - - Ø 32 133672 Boring bar intern / internal / - - Ø 32 1331 zurückgesetzt Boring bar rear offset intern / internal / a - - Ø 32 142450 142448 Doppel - intern / internal / - - Ø 32 133673 Double boring bar intern / internal / - - Ø 32 133118 133117 DIN 6499 - ER 25 149952 Werkzeughalter- Aufnahme Tooling holding fixture intern / internal / DIN 6499 - ER 32 149791 Solidfix S3 149950 Abstechhalter für Stechklingen ISCAR,5 - - 26 111623 Überkopf overhead 111624 Parting off tool holder ISCAR,5 - - 32 6 111625 Überkopf overhead 111626
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / l Drehzahl min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed 64,5 7.000 1,0 (1:1) DIN 6499 - ER 25 087553 94,5 7.000 1,0 (1:1) DIN 6499 - ER 25 087552 89,5 intern / internal / 7.000 1,0 (1:1) DIN 6499 - ER 25 113180 98,5 intern / internal / 7.000 1,0 (1:1) DIN 6499 - ER 25 108980 Drivne tool 0 86,5 20.000 0,25 (1:4) DIN 6499 - ER 16 109360 7.000 1,0 (1:1) DIN 1835 - B 16 113182 116,5 7.000 1,0 (1:1) DIN 1835 - B 16 1131 102 intern / internal / 7.000 1,0 (1:1) DIN 1835 - B 16 113181 111 intern / internal / 7.000 1,0 (1:1) DIN 1835 - B 16 113098 112 7.000 1,0 (1:1) DIN 6358-22 103237 69 12.000 1,0 (1:1) DIN 6499 - ER 25 137072 94 intern / internal / 12.000 1,0 (1:1) DIN 6499 - ER 25 136845 106 7.000 1,0 (1:1) DIN 6358-22 133451 Achsversatz with axle offset 88,5 97 107 intern / internal / 2.500 2,0 (2:1) DIN 6499 - ER 25 2.500 2,0 (2:1) DIN 6499 - ER 25 2.500 2,0 (2:1) DIN 6358-22 133080 133083 133086 133081 133084 133087 7
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / l Drehzahl min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed 7.000 1,0 (1:1) DIN 6499 - ER 25 133675 133676 7.000 1,0 (1:1) DIN 6499 - ER 25 133089 133090 intern / internal / 7.000 1,0 (1:1) DIN 6499 - ER 25 133681 133682 intern / internal / 7.000 1,0 (1:1) DIN 6499 - ER 25 133092 133093 3.500 2,0 (2:1) DIN 6499 - ER 25 133678 133679 Drivne tool 90 3.500 2,0 (2:1) DIN 6499 - ER 25 7.000 1,0 (1:1) DIN 1835 - B 16 133095 133684 133096 1336 7.000 1,0 (1:1) DIN 1835 - B 16 133101 133102 intern / internal / 7.000 1,0 (1:1) DIN 1835 - B 16 133687 133688 intern / internal / 7.000 1,0 (1:1) DIN 1835 - B 16 133098 133099 3.500 2,0 (2:1) DIN 6358-22 133690 133691 3.500 2,0 (2:1) DIN 6358-22 133104 133105 12.000 1,0 (1:1) DIN 6499-25 142653 142654 Driven tool 90 intern / internal / 12.000 1,0 (1:1) DIN 6499-25 142491 142492 8
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / l Drehzahl min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed zurückgesetzt Driven tool rear offset 95 20.000 0,25 (1:4) DIN 6499 - ER 16 133107 133108 2-fach 7.000 1,0 (1:1) DIN 6499 - ER 25 133694 Driven tool 90, 2 collet chucks 7.000 1,0 (1:1) DIN 6499 - ER 25 133110 Sägeblatt aufnahme Driven tool 90, for circular saw blades 1.670 3,0 (3:1) Ø80-22/27 133112 133113 Werkzeug ±90 64 6.000 1,0 (1:1) DIN 6499 - ER 20 133119 Driven tool ±90 64 intern / internal / 6.000 1,0 (1:1) DIN 6499 - ER 20 133 9
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / Für Schwerlastbearbeitung Heave duty machining l Drehzahl min-1 Übersetzung Werkzeugaufnahme nominal height Coolant supply Rotation speed Flanschbefestigung, beidseitiger Aufnahme - - Ø 30 133696 133697 90 -Adapter with flange mounting with two-sided chuck DIN 69880 - - Ø 30 133121 133122 Flanschbefestigung intern / internal / - - Ø 32 133698 Boring bar with flange mounting intern / internal / - - Ø 32 133115 Flanschbefestigung with flange mounting 106 4.000 1,0 (1:1) DIN 6358-22 133025 Flanschbefestigung with flange mounting 3.000 4,0 (4:1) DIN 6358-16 133006 10
CTX beta 500/800 V6-16-fach VDI 30 / CTX beta 500/800 V6 - for 16-positions VDI 30 nominal height / SAUTER Schnellwechselsystem MODIFIX SAUTER quick tool change system Auf Anfrage on request PI56 AGW SAUTER CAPTO SAUTER quick tool change system Auf Anfrage on request PI59 AGW SAUTER Schnellwechselsystem SOLIDFIX SAUTER quick tool change system Auf Anfrage on request PI58 Zubehör Accessories Spannzangenaufnahme für Kühlschmierstoff intern ollet chuck for boring bar holder coolant supply internal DIN 6499 - ER 25 DIN 6499 - ER 32 107846 150046 Verschlussstopfen aus Stahl O-Ring Plug from steel with o-ring 114577 Erforderliche Schlüssel, Spannzangen und Dichtscheiben sind nicht im Lieferumfang enthalten Required keys, collets and sealing washers are not included in delivery 11
CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height l Kühlschmierstoff Drehzahl min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed Transmission Tool chuck Order No. - - Ø 40 133433 133434 - - Ø 40 133440 133444 - - Ø 32 with two-sided chuck zurückgesetzt Aufnahme rear offset chuck Klemmung Boring bar holder with slotted clamp IK / IC 5-80 bar 12 Feinfilterung 50 m / fine filtering 50 m 133445 beidseitiger Aufnahme
CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height l Drehzahl Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed Boring bar intern / internal / - - Ø 40 1333 Doppel - Double boring bar intern / internal / - - Ø 40 139301 139322 Abstechhalter für Stechklingen ISCAR - - 26 111627 Überkopf overhead 111628 Parting off toolholder ISCAR - - 32 111629 Überkopf overhead 111630 13
CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height l Drehzahl Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed 95 117 103 intern / internal / 123 intern / internal / 112,5 111 133 111 intern / internal / 130 intern / internal / 102 6.000 1,0 (1:1) DIN 6499 - ER 32 101714 6.000 1,0 (1:1) DIN 6499 - ER 32 113179 6.000 1,0 (1:1) DIN 6499 - ER 32 111384 6.000 1,0 (1:1) DIN 6499 - ER 32 109240 16.000 0,25 (1:4) DIN 6499 - ER 20 139578 6.000 1,0 (1:1) DIN 1835 - B 20 113186 6.000 1,0 (1:1) DIN 1835 - B 20 113187 6.000 1,0 (1:1) DIN 1835 - B 20 113183 6.000 1,0 (1:1) DIN 1835 - B 20 113184 6.000 1,0 (1:1) DIN 6358-22 102181 94 10.000 1,0 (1:1) DIN 6499-32 136118 104 intern / internal / 10.000 1,0 (1:1) DIN 6499-32 132916 125 6.000 1,0 (1:1) DIN 6358-22 131944 Achsversatz with axle offset 99 108 117 intern / internal / 2.000 2,0 (2:1) DIN 6499 - ER 32 2.000 2,0 (2:1) DIN 6499 - ER 323 2.000 2,0 (2:1) DIN 6358-22 133424 133427 133430 133425 133428 133431 14
CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height l Drehzahl Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed 6.000 1,0 (1:1) DIN 6499 - ER 32 133405 133406 intern / internal / 6.000 1,0 (1:1) DIN 6499 - ER 32 133411 133412 3.000 2,0 (2:1) DIN 6499 - ER 32 133408 133409 Driven tool 90 6.000 1,0 (1:1) DIN 1835 - B 20 133413 133414 intern / internal / 6.000 1,0 (1:1) DIN 1835 - B 20 133416 133417 3.000 2,0 (2:1) DIN 6358-22 133419 133420 Spindelkopf 0 10.000 1,0 (1:1) DIN 6499-32 139037 139038 intern / internal / 10.000 1,0 (1:1) DIN 6499-32 139033 139032 zurückgesetzt Driven tool rear offset 125 16.000 0,25 (1:4) DIN 6499 - ER 20 133402 133403 2-fach Driven tool 90, 2 collet chucks 6.000 1,0 (1:1) DIN 6499 - ER 32 133399 133400 Sägeblattaufnahme Driven tool 90, for circular saw blades 1.330 3,0 (3:1) Ø - 22/27 133396 133397 Werkzeug ±90 81 4.000 1,0 (1:1) DIN 6499 - ER 25 133423 Driven tool ±90 81 intern / internal / 4.000 1,0 (1:1) DIN 6499 - ER 25 133422 15
CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height Schwerlastbearbeitung Heavy duty machining l Drehzal Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed Transmission Tool chuck Order No Flanschbefestigung, beidseitiger Aufnahme 90 -Adapter with flange mounting wwith two-sided chuck DIN 69880 - - Ø 40 133435 133436 Flanschbefestigung Boring bar with flange mounting Boring bar intern / internal / - - Ø 40 133446 Flanschbefestigung with flange mounting 125 4.000 1,0 (1:1) DIN 6358-22 132067 Flanschbefestigung with flange mounting 125 2.5000 4,0 (4:1) DIN 6358-22 132358 Flanschbefestigung with flange mounting 124 4.000 1,0 (1:1) DIN 1835 - B32 1340 Flanschbefestigung with flange mounting 110 intern / internal / 2.000 2,0 (2:1) DIN 1835 - B32 137383 16
CTX beta 500/800 V6-12-fach - VDI 40 CTX beta 500/800 V6 - for 12-positions VDI 40 nominal height SAUTER Schnellwechselsystem MODIFIX SAUTER quick tool change system Auf Anfrage on request PI56 AGW SAUTER CAPTO SAUTER quick tool change system Auf Anfrage on request PI59 AGW SAUTER Schnellwechselsystem SOLIDFIX SAUTER quick tool change system Auf Anfrage on request PI58 Zubehör Accessories Spannzangenaufnahme für Kühlschmierstoff intern Collet chuck for boring bar holder coolant supply internal DIN 6499 - ER 32 112698 Verschlussstopfen aus Stahl O-Ring Plug from steel with o-ring 114575 Erforderliche Schlüssel, Spannzangen und Dichtscheiben sind nicht im Lieferumfang enthalten Required keys, collets and sealing washers are not included in delivery 17
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height l Kühlschmierstoff Drehzal min-1 Übersetzung Werkzeugaufnahme Coolant supply Rotation speed Transmission Tool chuck Order No. - - Ø 40 136364 136368 - - Ø 40 136374 136380 - - Ø 32 with two-sided chuck zurückgesetzt Aufnahme rear offset chuck Klemmung Boring bar holder with slotted clamp IK / IC 5-80 bar 18 Feinfilterung 50 m / fine filtering 50 m 136384 beidseitiger Aufnahme
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height l Drehzal Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed Boring bar intern / * internal / * - - Ø 40 136400 Doppel - Double boring bar intern / * internal / * - - Ø 40 139324 139325 Werkzeughalter- Aufnahme Tooling holding fixture intern / internal / - - DIN 6499 - ER 32 149796 - - Solidfix S4 149977 Abstechhalter für Stechklingen ISCAR,5 - - 26 111627 Überkopf overhead 111628 Parting off toolholder ISCAR,5 - - 32 111629 Überkopf overhead 111630 19
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height l Drehzal Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed 95 117 103 intern / internal / 123 intern / internal / 112,5 111 133 111 intern / internal / 130 intern / internal / 102 6.000 1,0 (1:1) DIN 6499 - ER 32 101714 6.000 1,0 (1:1) DIN 6499 - ER 32 113179 6.000 1,0 (1:1) DIN 6499 - ER 32 111384 6.000 1,0 (1:1) DIN 6499 - ER 32 109240 16.000 0,25 (1:4) DIN 6499 - ER 20 139578 6.000 1,0 (1:1) DIN 1835 - B 20 113186 6.000 1,0 (1:1) DIN 1835 - B 20 113187 6.000 1,0 (1:1) DIN 1835 - B 20 113183 6.000 1,0 (1:1) DIN 1835 - B 20 113184 6.000 1,0 (1:1) DIN 6358-22 102181 Spindelkopf 0 94 10.000 1,0 (1:1) DIN 6358-32 136118 104 intern / internal / 10.000 1,0 (1:1) DIN 6358-32 132916 125 6.000 1,0 (1:1) DIN 6358-22 131944 Achsversatz with axle offset 99 108 117 intern / internal / 2.000 2,0 (2:1) DIN 6499 - ER 32 2.000 2,0 (2:1) DIN 6499 - ER 32 2.000 2,0 (2:1) DIN 6358-22 133424 133427 133430 133425 133428 133431 110 6.000-1,0 (1:1) DIN 6499-25 142773 20
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height l Drehzal Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed 6.000 1,0 (1:1) DIN 6499 - ER 32 136408 136410 intern / internal / 6.000 1,0 (1:1) DIN 6499 - ER 32 136417 136421 3.000 2,0 (2:1) DIN 6499 - ER 32 136425 136426 Driven tool 90 6.000 1,0 (1:1) DIN 1835 - B 20 136428 136429 intern / internal / 6.000 1,0 (1:1) DIN 1835 - B 20 136432 136433 3.000 2,0 (2:1) DIN 6358-22 136437 136438 Spindelkopf 90 10.000 1,0 (1:1) DIN 6499-32 139045 139046 Driven tool 90 intern / internal / 10.000 1,0 (1:1) DIN 6499-32 139041 139042 zurückgesetzt Driven tool rear offset 125 16.000 0,25 (1:4) DIN 6499 - ER 20 133402 133403 2-fach Driven tool 90, 2 collet chucks 6.000 1,0 (1:1) DIN 6499 - ER 32 136442 136443 Sägeblattaufnahme Driven tool 90, for circular saw blades 1.330 3,0 (3:1) Ø - 22/27 133396 133397 Werkzeug ±90 81 4.000 1,0 (1:1) DIN 6499 - ER 25 133423 Driven tool ±90 81 intern / internal / 4.000 1,0 (1:1) DIN 6499 - ER 25 133422 21
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height Schwerlastbearbeitung Heavy duty machining l Drehzal Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed Flanschbefestigung, beidseitiger Aufnahme 90 -Adapter with flange mounting with two-sided chuck DIN 69880 - Ø 40 136459 136481 Flanschbefestigung Boring bar with lange mounting intern / internal / - Ø 40 136491 Flanschbefestigung Boring bar with lange mounting intern / internal / - Ø 40 141527 141528 22
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height l Drehzal Übersetzung Werkzeugaufnahme min -1 Coolant supply Rotation speed Transmission Tool chuck Order No Flanschbefestigung with flange mounting 125 4.000 1,0 (1:1) DIN 6358-22 132067 Flanschbefestigung with flange mounting 125 2.500 4,0 (4:1) DIN 6358-22 132358 Flanschbefestigung with flange mounting 124 4.000 1,0 (1:1) DIN 1835 - B32 1340 Flanschbefestigung with flange mounting 110 intern / internal / 2.000 2,0 (2:1) DIN 1835 - B32 137383 23
CTX beta 800/1250-12-fach - VDI 40 CTX beta 800/1250 - for 12-positions VDI 40 nominal height SAUTER Schnellwechselsystem MODIFIX SAUTER quick tool change system Auf Anfrage on request PI56 AGW SAUTER CAPTO SAUTER quick tool change system Auf Anfrage on request PI59 AGW SAUTER Schnellwechselsystem SOLIDFIX SAUTER quick tool change system Auf Anfrage on request PI58 Zubehör Accessories Spannzangenaufnahme für Kühlschmierstoff intern Collet chuck for boring bar holder coolant supply internal DIN 6499 - ER 32 112698 Verschlussstopfen aus Stahl O-Ring Plug from steel with o-ring 114575 Erforderliche Schlüssel, Spannzangen und Dichtscheiben sind nicht im Lieferumfang enthalten Required keys, collets and sealing washers are not included in delivery 24