Golden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SM. Released
|
|
- Greta Melsbach
- vor 5 Jahren
- Abrufe
Transkript
1 Golden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level conversion Typischer Lichtfluss: 64 lm bei 35 ma Besonderheit des Bauteils: hocheffiziente Lichtquelle bei geringem Platzbedarf Farbort: x =,33, y =,33 nach CIE 1931 (weiß) typische Farbtemperatur: 56 K Farbwiedergabeindex: 8 Abstrahlwinkel: Lambertscher Strahler (12 ) Technologie: ThinGaN optischer Wirkungsgrad: 4 lm/w Gruppierungsparameter: Lichtstrom, Farbort Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet Lötmethode: Reflow Löten Vorbehandlung: nach JEDEC Level 2 Gurtung: 24-mm Gurt mit 8/Rolle, ø18 mm ESD-Festigkeit: ESD-sicher bis 2 kv nach JESD22-A114-D Anwendungen Außen- und Innenbeleuchtung im Automobilbereich (z.b. Scheinwerfer) Blitzlicht Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) Leselampen (Flugzeug, Auto, Bus) Ersatz von Kleinst-Glühlampen Fassadenbeleuchtung im Innen- und Außenbereich Display Hinterleuchtung mit hohem Helligkeitsbedarf z. B. TFT Dekorative Beleuchtung Signal- und Symbolleuchten zur Orientierung Markierungsbeleuchtung (Stufen, Fluchtwege, u.ä.) Features package: white SMD package, colorless clear silicone resin; chip level conversion typical Luminous Flux: 64 lm at 35 ma feature of the device: high efficient lightsource at low space color coordinates: x =.33, y =.33 acc. to CIE 1931 (white) typ. color temperature: 56 K color reproduction index: 8 viewing angle: Lambertian Emitter (12 ) technology: ThinGaN optical efficiency: 4 lm/w grouping parameter: luminous flux, color coordinates assembly methods: suitable for all SMT assembly methods soldering methods: reflow soldering preconditioning: acc. to JEDEC Level 2 taping: 24 mm tape with 8/reel, ø18 mm ESD-withstand voltage: up to 2 kv acc. to JESD22-A114-D Applications exterior and interior automotive lighting (e.g. front light) Flashlight backlighting (illuminated advertising, general lighting) reading lamps (aircraft, car, bus) substitution of micro incandescent lamps indoor and outdoor commercial and residential architectural lighting display backlight where high brightness is required e.g. TFT decorative and entertainment lighting signal and symbol luminaire for orientation marker lights (e.g. steps, exit ways, etc.)
2 Bestellinformation Ordering Information Typ Emissionsfarbe 1) Seite 18 Lichtstrom 2) Seite 18 Lichtstärke Bestellnummer Type Color of Emission Luminous 1) page 18 Flux Luminous 2) page 18 Intensity Ordering Code I F = 35 ma Φ V (mlm) white I F = 35 ma I V (mcd) 17 (typ.) 19 (typ.) -HYJZ-5K8L -JXJZ-5K8L Q6511A783 Q6511A782 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: -HYJZ-5K8L bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen HY, HZ, JX, JY oder JZ enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: -HYJZ-5K8L bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -5K, -5L, -6K, -6L, -7K, -7L, -8K oder -8L enthalten ist (siehe Seite 5 für nähere Information). Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. -HYJZ-5K8L means that only one group HY, HZ, JX, JY or JZ will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. -HYJZ-5K8L means that only 1 chromaticity coordinate group -5K, -5L, -6K, -6L, -7K, -7L, -8K or -8L will be shippable on each reel (see page 5 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable. Vergleichstabelle Correlation Table Typ Type -HYJZ-5K8L -JXJZ-5K8L 1) Seite 18 Lichtstrom 1) page 18 Luminous Flux I F = 35 ma Φ V (mlm) ) Seite 18 Typischer Lichtstrom 2) page 18 Typical Luminous Flux I F = 5 ma Φ V (mlm)
3 Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (T A =25 C) Stoßstrom Surge current t 1 μs, D =.5, T A =25 C Sperrspannung Reverse voltage (T A =25 C) (min.) (max.) Symbol Symbol Wert Value T op C T stg C T j >15 for short C term applications T j 125 C I F I F 1 1 Einheit Unit ma ma I FM 2 ma V R not designed for reverse operation V
4 Kennwerte Characteristics (T A = 25 C) Bezeichnung Parameter 5) Seite 18 Farbkoordinate x nach CIE 1931 (typ.) Chromaticity coordinate x acc. to CIE 1931 I F = 35 ma 5) Seite 18 Farbkoordinate y nach CIE 1931 (typ.) Chromaticity coordinate y acc. to CIE 1931 I F = 35 ma Abstrahlwinkel bei 5 % Ι V (Vollwinkel) 5) page 18 5) page 18 Symbol Symbol Wert Value x.33 y.33 Einheit Unit (typ.) 2ϕ 12 Grad Viewing angle at 5 % Ι V deg. 6 Seite 18) Durchlassspannung (min.) 6) page 18 Forward voltage (typ.) I F = 35 ma (max.) Sperrstrom Reverse current (max.) I R not designed for reverse operation μa Temperaturkoeffizient von x (typ.) TC x /K Temperature coefficient of x I F = 35 ma; 1 C T 1 C Temperaturkoeffizient von y Temperature coefficient of y I F = 35 ma; 1 C T 1 C Temperaturkoeffizient von V F Temperature coefficient of V F I F = 35 ma; 1 C T 1 C Optischer Wirkungsgrad Optical efficiency I F = 35 ma Wärmewiderstand Thermal resistance Sperrschicht/Lötpad Junction/soldering point *R th (max) basiert auf statistischen Werten R th (max) is based on statistic values (typ.) (typ.) (typ.) (typ.) (max.) V F V F V F V V V TC y /K TC V 4. mv/k η opt 4 lm/w R th JS 6.5 R th JS 11* K/W K/W
5 5) Seite 18 Farbortgruppen 5) page 18 Chromaticity coordinate groups.9.8 Cy E Cx Cy L 5K L 6K + 7L 7K 8L 8K Cx OHA13327 Gruppe Group Cx Cy Gruppe Group Cx Cy 5K K L L K K L L
6 Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group HY HZ JX JY JZ 1) Seite 18 Lichtstrom Luminous Flux Φ V (mlm) ) page 18 2) Seite 18 Lichtstärke Luminous Intensity I V (mcd) 12 (typ.) 14 (typ.) 16 (typ.) 18 (typ.) 22 (typ.) 2) page 18 Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of a few individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: HZ-6K Example: HZ-6K Helligkeitsgruppe Brightness Group HZ Farbortgruppe Chromaticity Coordinate Group Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Note: No packing unit / tape ever contains more than one brightness group. 6K
7 2) Seite 18 Relative spektrale Emission 2) page 18 Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve Φ rel = f (λ); T A = 25 C; I F = 35 ma 1 % OHL12811 Φ rel 8 V λ ) Seite 18 Abstrahlcharakteristik Radiation Characteristic Ι rel = f (ϕ); T A = 25 C nm 8 λ 2) page OHL166 ϕ
8 2) Seite 18 Durchlassstrom 2) page 18 Forward Current I F = f (V F ); T A = 25 C 2) 7) Seite 18 Relative Lichtstrom 2) 7) page 18 Relative Luminous Flux Φ V /Φ V (35 ma) = f (I F ); T A = 25 C 12 ma I F OHL (35 ma) Φ V Φ V OHL V 3.7 V F 2) Seite 17 Farbortverschiebung Chromaticity Coordinate Shift x, y = f (I F ); T A = 25 C.2 2) page 17 OHL ma 1 I F 3 ΔCx, ΔCy.1.5 Cx Cy ma1 I F
9 2) Seite 17 Relative Vorwärtsspannung 2) page 17 Relative Forward Voltage ΔV F = V F - V F (25 C) = f (T j ); I F = 35 ma.4 V ΔV F.2.1 OHL468 2) Seite 18 Relative Lichtstrom 2) page 18 Relative Luminous Flux Φ V /Φ V (25 C) = f (T j ); I F = 35 ma Φ V Φ V 1.2 (25 C).8.6 OHL C 12 T j 2) Seite 18 Farbortverschiebung Chromaticity Coordinate Shift x, y = f (T j ); I F = 35 ma.1 2) page 18 OHL C 12 T j ΔCx, ΔCy.5 Cy -.5 Cx C 12 T j
10 Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T S ) 11 ma I F OHL Do not use current below 1 ma C 14 TS Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T S = 25 C 2.5 A I F D = t T P t P T OHL3757 D = I F Exemplarische durchschnittliche Lebens- 2) Seite 17 dauerfür mittlere Helligkeitsgruppe 2) page 17 Exemplary median Lifetime for median Brightness Group Bedingungen Conditions mittlere Lebensdauer median Lifetime Einheit Unit I F = 25 ma T S = 25 C I F = 35 ma T S = 85 C I F = 5 ma T S = 125 C T J = 15 C I F = 5 ma T S = 15 C T J = 175 C 5. Betriebsstunden operating hours 1. Betriebsstunden operating hours 1. Betriebsstunden operating hours 1 Betriebsstunden operating hours *The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures. Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T S = 85 C 2.5 A I F D = t T P t P D = T OHL3758 I F s 1 t p s 1 t p
11 8) Seite 18 Maßzeichnung 8) page 18 Package Outlines...1 (.4) A C Heat sink Protection Diode 6.2 (.244) 5.8 (.228) 4.25 (.167) 4.15 (.163) ø.81 (.31) ø.73 (.28) (R.85 (.33)) 1.9 (.75) 1.7 (.67) 5.35 (.21) 5.25 (.26) Cathode 11.2 (.441) 1.8 (.425) 1.2 (.47).8 (.31) (ø4.2 (.165)) 1.1 (.43).9 (.35) 2. (.79) 1.6 (.63).29 (.11).24 (.9).65 (.26).45 (.18) 7.2 (.283) 6.8 (.268) GPLY6147 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 2 mg 8) Seite 18 Gurtung / Polarität und Lage Verpackungseinheit Method of Taping / Polarity and Orientation 8) page 18 Packing 8/Rolle, ø18 mm unit 8/reel, ø18 mm Cathode/Collector Side 4 (.157) 1.55 (.61) 2 (.79) 1.75 (.69) 11.5 (.453) 12.4 (.488) 24 (.945).3 (.12).3 (.12) 7.35 (.289) 6.35 (.25) 8 (.315) 1.9 (.75) OHAY
12 8) Seite 18 Empfohlenes Lötpaddesign Reflow 8) page 18 Recommended Solder Pad Reflow Löten Soldering Achtung: Anode und Heatsink sind elektrisch verbunden Attention: Anode and Heatsink are electrically connected 3 Lötstellen Thermisch optimiertes PCB 3 solder points Thermal enhanced PCB 1.6 (.63) 11.6 (.457) ø4. (.157) Heatsink attach Footprint 2.3 (.91) Empfohlene Padgeometrie 12. (.472) 11.6 (.457) Recommended Solder Pad Design 1 (.39) 2.3 (.91) 12. (.472) ø2.5 (.98) ø4. (.157) Kupfer Copper 1 (.39) 1.6 (.63) Lötstopplack Solder resist Lötpasten Schablone Solder paste stencil Freies Kupfer Bare Copper OHPY
13 Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 Reflow Lötprofil für bleifreies Löten Reflow Soldering Profile for lead free soldering (nach J-STD-2B) (acc. to J-STD-2B) T 3 C C 24 C 217 C Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile 1 s min 3 s max OHLA687 + C 26 C -5 C 245 C ±5 C +5 C 235 C - C s max Ramp Down 6 K/s (max) 1 s max 1 5 Ramp Up 3 K/s (max) 25 C s 3 t Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning
14 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Semiconductors (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Bar Code (X) PROD NO: Product Code (9D) D/C: Date Code (Q)QTY: Product Quantity per Reel Bar Code Lx xxxx Product Name RoHS Compliant ML 2 (G) GROUP: X - X - X Sample Bin1: Bin Information Color 1 Bin2: Bin3: Temp ST 26 C RT Additional TEXT R77 DEMY PACKVAR: Packing Type Forward Voltage Group Wavelength Group Brightness Group OHA1243 Gurtverpackung Tape and Reel W 1 D P P 2 F E W A N 13. ±.25 P 1 Label Direction of unreeling W 2 Gurtvorlauf: Leader: Gurtende: Trailer: 4 mm 4 mm 16 mm 16 mm Direction of unreeling OHAY324 Tape dimensions in mm (inch) W P P 1 P 2 D E F ±.1 (.157 ±.4) 8 ±.1 (.315 ±.4) 2 ±.1 (.79 ±.4) ( ) 1.75 ± ±.1 (.69 ±.4) (.453 ±.4) Reel dimensions in mm (inch) A W N min W 1 W 2 max 18 (7) 24 (.945) 6 (2.362) ( ) 3.4 (1.197)
15 _< 1% RH. C). _< 1% RH. If blank, see bar code label _< C). (1T) LOT NO: LEVEL If blank, see bar code label _< 11 2 (9D) D/C: 144 LSY T676 Bin1: P-1-2 Bin2: Q-1-2 Bin3: ML Temp ST 2 22 C R 2a 3 24 C R 26 C RT Additional TEXT R77 PACKVAR: (G) GROUP: P-1+Q-1 If wet, 5% parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, examine units, if necessary bake units WET Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. (1T) LOT NO: 11 2 (9D) D/C: 144 LSY T676 Bin1: P-1-2 Bin2: Q-1-2 Bin3: ML Temp ST 2 2a 22 C R 24 C R 3 26 C RT Additional TEXT R77 PACKVAR: (G) GROUP: P-1+Q-1 Trockenverpackung und Materialien Dry Packing Process and Materials CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label 15% 1% Comparator check dot Desiccant Humidity Indicator MIL-I-8835 OSRAM Anm.: Note: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials OHA539 Barcode label Barcode label CAUTION LEVEL This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours OSRAM Opto Semiconductors (6P) BATCH NO: GH1234 Muster (X) PROD NO: (Q)QTY: 2 Multi TOPLED R18 DEMY OSRAM Opto Semiconductors (6P) BATCH NO: GH1234 Muster (X) PROD NO: (Q)QTY: 2 Multi TOPLED R18 DEMY OSRAM Packing Sealing label OHA
16 Revision History: Previous Version: Page Subjects (major changes since last revision) Date of change 1, 13 OS-IN (Introduction of Jedec Level 2) , 6 ordering code changed all OS-IN Anm.: Gemäß IEC (EN ) gilt: LED STRAHLUNG NICHT DIREKT IN DEN STRAHL BLICKEN LED KLASSE 2 Note: According IEC (EN ): OHW12885 LED RADIATION DO NOT STARE INTO BEAM CLASS 2 LED PRODUCT OHW
17 Patent List Patent No. US US US Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 9) page 18 may only be used in life-support devices or systems 1 ) page 18 with the express written approval of OSRAM OS
18 Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 3) - 4) - 5) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±.1 ermittelt. 6) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) 9) Maße werden wie folgt angegeben: mm (inch) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. 1) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%. 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) - 4) - 5) Chromaticity coordinate groups are tested at a current 6) 7) 8) 9) 1) pulse duration of 25 ms and a tolerance of ±.1. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±.1 V. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-9355 Regensburg All Rights Reserved
Opto Semiconductors. White LED
Hyper TOPLED White LED Vorläufige Daten / Preliminary Data Besondere Merkmale GaN-Technologie Farbe: weiß x =.3, y =.32 nach CIE1931 Abstrahlcharakteristik: Lambertscher Strahler (12 ) ESD-sicher bis 2
MehrHyper CHIPLED Hyper-Bright LED LS Q976, LO Q976, LY Q976. Vorläufige Daten / Preliminary Data
Hyper CHIPLED Hyper-Bright LED LS Q976, LO Q976, LY Q976 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: 63 Besonderheit des Bauteils: kleinste Bauform 1,6 mm x,8 mm x,8 mm Wellenlänge:
MehrHyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 8 Besonderheit des Bauteils: extrem kleine Bauform 2, mm x 1,2 mm x,8 mm Wellenlänge: 632 nm (super-rot), 6 nm (orange),
MehrCHIPLED LH R
CHIPLED LH R974 Besondere Merkmale Gehäusetyp: 0805 Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,25 mm x 0,8 mm Wellenlänge: 645 nm Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160
MehrCHIPLED LG N971, LY N971
CHIPLED LG N971, LY N971 Besondere Merkmale Gehäusetyp: 126 Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm Wellenlänge: 57 nm (grün), 587 nm (gelb) Abstrahlwinkel: Lambertscher
MehrGolden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SM
Golden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant Released Abkündigung nach OS-PD-29-9 Obsolete acc. to OS-PD-29-9 Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse,
MehrMicro SIDELED White Hyper-Bright LED LW Y87S
Micro SIDELED White Hyper-Bright LED Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik; ideal für Hinterleuchtungen und
MehrGolden Dragon GreenProduct-Pbfreeleads LW W5SG. Vorläufige Daten / Preliminary Data
Golden Dragon GreenProduct-Pbfreeleads LW W5SG Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, farbiger diffuser Verguss Besonderheit des Bauteils: Hoch effiziente
MehrGolden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SM. Released
Golden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SM Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level conversion
MehrBLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676
BLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
MehrOpto Semiconductors. Vorläufige Daten / Preliminary Data
CHIPLED Vorläufige Daten / Preliminary Data Besondere Merkmale SMT-Gehäusetyp: 63 Farben: grün (572 nm), gelb (59 nm) Abstrahlcharakteristik: extrem breit (16 ) Industriestandard bzgl. Lötpadraster geringe
MehrOSLON MX ECE Lead (Pb) Free Product - RoHS Compliant LUW CN7N. Vorläufige Daten / Preliminary Data
OSLON MX ECE Lead (Pb) Free Product - RoHS Compliant Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und Linse Besonderheit des Bauteils: Kompakte Lichtquelle für platzsparende Designs
MehrHyper TOPLED White LED LW T676. Vorläufige Daten / Preliminary Data
Hyper TOPLED White LED LW T676 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen
MehrGolden DRAGON ARGUS with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5KM. Released
Golden DRAGON ARGUS with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5KM Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, farbloser klarer Silikon - Verguss mit ARGUS
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LH R974
CHIPLED Lead (Pb) Free Product - RoHS Compliant LH R974 Besondere Merkmale Gehäusetyp: 85, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 2, mm x 1,25 mm x,8 mm Wellenlänge:
MehrGolden DRAGON Engineering Kit Lens LK ACC W01. LK ACC W01 abgekündigt nach OS-PD wird nicht ersetzt werden. no replacement.
Golden DRAGON Engineering Kit Lens abgekündigt nach OS-PD-2006-008 - wird nicht ersetzt werden. obsolete acc. to OS-PD-2006-008 - no replacement. Besondere Merkmale Gehäusetyp: transparenter Halter Abstrahlwinkel:
MehrTOPLED RG LS T770, LO T770, LY T770, LG T770, LP T770
TOPLED RG LS T770, LO T770, LY T770, LG T770, LP T770 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: Bauteil wird top-down montiert und strahlt durch das PCB, deshalb ideal
MehrPlatinum DRAGON white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SN
Platinum DRAGON white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SN Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level conversion
MehrGolden Dragon Lead (Pb) Free Product - RoHS Compliant LW W5SG. Vorläufige Daten / Preliminary Data
Golden Dragon Lead (Pb) Free Product - RoHS Compliant LW W5SG Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, farbiger diffuser Silikon - Verguss Besonderheit des
MehrHyper CHIPLED Hyper-Bright LED LW Q18S
Hyper CHIPLED Hyper-Bright LED Besondere Merkmale Gehäusetyp: SM Gehäuse 63 Besonderheit des Bauteils: kleinste Bauform 1,6x,8x,6mm(LxBxH) Farbort: x =,35, y =,34 nach CIE 1931 (weiß) ypische Farbtemperatur:
MehrPlatinum DRAGON white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SN. Released
Platinum DRAGON white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SN Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level conversion
MehrCHIPLED 0.3 Lead (Pb) Free Product - RoHS Compliant LW Q38E
CHIPLED.3 Lead (Pb) Free Product - RoHS Compliant LW Q38E Besondere Merkmale Gehäusetyp: Standard SMT Footprint 63, farbiger diffuser Verguss Besonderheit des Bauteils: sehr flache Bauform 1,6 x,8 x,3
MehrOSLON SSL Ceramic package Lead (Pb) Free Product - RoHS Compliant LUW CP7P. Vorläufige Daten / Preliminary Data
OSLON SSL Ceramic package Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und Linse Typischer Lichtstrom:
MehrFIREFLY 0402 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW VH8G
FIREFLY 42 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW VH8G Besondere Merkmale Gehäusetyp: SMT Gehäuse, Standard SMT Footprint 42, farbiger diffuser Verguss Besonderheit des Bauteils: kompakte
MehrPlatinum DRAGON warm white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LCW W5SN. Released
Platinum DRAGON warm white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LCW W5SN Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level
MehrFIREFLY 0402 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LA VH9F, LR VH9F. Vorläufige Daten / Preliminary Data
FIREFLY 42 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LA VH9F, LR VH9F Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMT Gehäuse, Standard SMT Footprint 42, farbloser
MehrTOPLED High-optical Power LED (HOP) LS T675. Vorläufige Daten / Preliminary Data
TOPLED High-optical Power LED (HOP) LS T675 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad
MehrLC SOT-23 LED, Diffused Low Current LED LS S269, LY S269, LG S269. Nicht für Neuentwicklungen / Not for New Designs
LC SOT-23 LED, Diffused Low Current LED LS S269, LY S269, LG S269 Nicht für Neuentwicklungen / Not for New Designs Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses SOT-23 Gehäuse Besonderheit des
MehrHyper PointLED White Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW P473. Vorläufige Daten / Preliminary Data
Hyper PointLED White Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW P473 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbiger diffuser Verguss Besonderheit
MehrHyper PointLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW P4SG. Vorläufige Daten / Preliminary Data
Hyper PointLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant reverse mount top mount Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes
MehrTOPLED Super-Bright, Hyper-Red GaAlAs-LED LH T674
TOPLED Super-Bright, Hyper-Red GaAlAs-LED LH T674 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
Mehr3 mm (T1) LED, Diffused LR 3360, LS 3360, LO 3360 LY 3360, LG 3360, LP 3360
3 mm (T1) LED, Diffused LR 3360, LS 3360, LO 3360 Besondere Merkmale eingefärbtes, diffuses Gehäuse als optischer Indikator einsetzbar Lötspieße mit Aufsetzebene gegurtet lieferbar Störimpulsfest nach
MehrMini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670
Mini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: kleine Bauform 2,3 mm x 1,3 mm x 1,4 mm Wellenlänge: 628 nm (super-rot),
MehrIR-Lumineszenzdiode (940 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (940 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4231
IR-Lumineszenzdiode (94 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (94 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4231 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Chipgröße
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LG N971, LY N971
CHIPLED Lead (Pb) Free Product - RoHS Compliant LG N971, LY N971 Besondere Merkmale Gehäusetyp: 126, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm
MehrCHIPLED 0.3 Lead (Pb) Free Product - RoHS Compliant LB Q39E
CHIPLED.3 Lead (Pb) Free Product - RoHS Compliant LB Q39E Besondere Merkmale Gehäusetyp: standard SMT Footprint 63, farbloser diffuser Verguss Besonderheit des Bauteils: sehr flache Bauform 1,6 x,8 x,3
MehrSmartLED 0603 Enhanced Optical Power Chip Lead (Pb) Free Product - RoHS Compliant LW L28G. Vorläufige Daten / Preliminary Data
SmartLED 63 Enhanced Optical Power Chip Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMT Footprint 63, farbiger diffuser Verguss Besonderheit
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LO R971, LY R971
CHIPLED Lead (Pb) Free Product - RoHS Compliant LO R971, LY R971 Besondere Merkmale Gehäusetyp: 85, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 2, mm x 1,25 mm x,8 mm Wellenlänge:
MehrAdvanced Power TOPLED Plus Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LCW G5GP. Released
Advanced Power TOPLED Plus Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LCW G5GP Released Besondere Merkmale Gehäusetyp: weißes PLCC-4 Gehäuse, klarer Silikon - Verguss
MehrHyper Mini TOPLED White Hyper-Bright LED LW M673
Hyper Mini TOPLED White Hyper-Bright LED LW M673 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version. Besondere Merkmale
MehrHyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 080 Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,2 mm x 0,8 mm Wellenlänge: 633 nm (super-rot), 606
MehrCHIPLED 0.3 Lead (Pb) Free Product - RoHS Compliant LB Q39G, LT Q39G
CHIPLED.3 Lead (Pb) Free Product - RoHS Compliant LB Q39G, LT Q39G Besondere Merkmale Gehäusetyp: standard SMT Footprint 63, farbloser diffuser Verguss Besonderheit des Bauteils: sehr flache Bauform 1,6
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Chipgröße
MehrHyper TOPLED Hyper-Bright LED LS T676, LA T676, LO T676, LY T676
Hyper TOPLED Hyper-Bright LED Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und Einkopplungen in Lichtleiter
MehrHyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 85, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform
MehrHyper CHIPLED Hyper-Bright LED LB Q993
Hyper CHIPLED Hyper-Bright LED LB Q993 Abgekündigt nach OS-PD-23-7 - wird durch LB L293 ersetzt werden Obsolete acc. to OS-PD-23-7 - will be replaced by LB L293 Besondere Merkmale Gehäusetyp: SMT Gehäuse
MehrGolden Dragon LB W5SG, LV W5SG. Vorläufige Daten / Preliminary Data
Golden Dragon LB W5SG, LV W5SG Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute
MehrMicro SIDELED 0.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y1SG
Micro SIDELED.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y1SG Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbiger diffuser Silikon Verguss Besonderheit
Mehr650nm Resonant Cavity LED-Chip 650nm Resonant Cavity LED Die F372A. Vorläufige Daten / Preliminary Data
65nm Resonant Cavity LED-Chip 65nm Resonant Cavity LED Die F372A Vorläufige Daten / Preliminary Data Besondere Merkmale keine Schwelle hohe Leistung Kurze Schaltzeiten: 15ns Oberflächenstrahler Optimale
MehrCHIPLED 0.3 Lead (Pb) Free Product - RoHS Compliant LB Q39E; LT Q39E
CHIPLED.3 Lead (Pb) Free Product - RoHS Compliant LB Q39E; LT Q39E Besondere Merkmale Gehäusetyp: standard SMT Footprint 63, farbloser diffuser Verguss Besonderheit des Bauteils: sehr flache Bauform 1,6
MehrPointLED Enhanced optical Power LED (HOP2000) Lead (Pb) Free Product - RoHS Compliant LA P47B LY P47B. Vorläufige Daten / Preliminary Data
PointLED Enhanced optical Power LED (HOP2) Lead (Pb) Free Product - RoHS Compliant LA P47B LY P47B reverse mount top mount Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT
MehrMicro SIDELED 0.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y1SG
Micro SIDELED.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y1SG acc. OS-PCN-29-25-A Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbiger diffuser Silikon Verguss
MehrSFH Features Especially suitable for applications from 740 nm to 1100 nm 5 mm LED plastic package Integrated NTC thermistor, R 25 =10kΩ
Silizium-PIN-Fotodiode mit integriertem Temperatur-Sensor Silicon PIN Photodiode with integrated Temperature Sensor Lead (Pb) Free Product - RoHS Compliant SFH 54 Wesentliche Merkmale Speziell geeignet
MehrIR-Lumineszenzdiode (940 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (940 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4239
IR-Lumineszenzdiode (94 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (94 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4239 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Niedriger
MehrTOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW T6SG
TOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW T6SG Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, eingefärbter diffuser Silikon - Verguss Besonderheit
MehrPointLED Enhanced optical Power LED (HOP2000) Lead (Pb) Free Product - RoHS Compliant LA P47B LY P47B. Vorläufige Daten / Preliminary Data
PointLED Enhanced optical Power LED (HOP2) Lead (Pb) Free Product - RoHS Compliant LA P47B LY P47B reverse mount top mount Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT
MehrDiamond DRAGON Lead (Pb) Free Product - RoHS Compliant LR W5AP, LA W5AP, LY W5AP. Vorläufige Daten / Preliminary Data
Diamond DRAGON Lead (Pb) Free Product - RoHS Compliant LR W5AP, LA W5AP, LY W5AP Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: schwarzes SMD-Gehäuse, farbloser klarer Silikon - Verguss,
MehrAdvanced Power TOPLED Plus Enhanced ThinFilm LED Lead (Pb) Free Product - RoHS Compliant LR G5AP. Released
Advanced Power TOPLED Plus Enhanced ThinFilm LED Lead (Pb) Free Product - RoHS Compliant Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, klarer Silikon - Verguss, klare Silikonlinse Besonderheit
Mehr5 mm (T1 ¾) LED, Diffused LR 5360, LS 5360, LY 5360, LG 5360
mm (1 ¾) LED, Diffused LR 36, LS 36, LY 36, LG 36 Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses mm (1 ¾) Gehäuse Besonderheit des Bauteils: Lötspieße mit Aufsetzebene Wellenlänge: 64 nm (rot),
MehrTOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG
TOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, eingefärbter diffuser Silikon - Verguss Besonderheit
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LS Q971, LO Q971, LY Q971, LG Q971. Released
CHIPLED Lead (Pb) Free Product - RoHS Compliant LS Q971, LO Q971, LY Q971, LG Q971 Released Besondere Merkmale Gehäusetyp: 63, farbloser diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,6
MehrCHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LG Q976. Vorläufige Daten / Preliminary Data
CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LG Q976 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: 63, farbloser, transparenter Verguss Besonderheit des Bauteils:
MehrSIDELED long life Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LW A6SG. Released
SIDELED long life Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LW A6SG Released Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, eingefärbter diffuser Silikon - Verguss
MehrSchmitt-Trigger IC im Smart DIL Gehäuse Schmitt-Trigger IC in Smart DIL Package Lead (Pb) Free Product - RoHS Compliant SFH 5440 SFH 5441
Schmitt-Trigger IC im Smart DIL Gehäuse Schmitt-Trigger IC in Smart DIL Package Lead (Pb) Free Product - RoHS Compliant SFH 5440 SFH 544 Wesentliche Merkmale SFH 5440: Ausgang active low SFH 544: Ausgang
MehrHyper TOPLED Enhanced optical Power LED (ATON ) LW T67C. Vorläufige Daten / Preliminary Data
Hyper TOPLED Enhanced optical Power LED (ATON ) Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik;
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4236
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4236 Vorläufige Daten / Preliminary Data Wesentliche Merkmale max.
MehrHyper Mini TOPLED Enhanced optical Power LED (ATON ) LW M67C
Hyper Mini TOPLED Enhanced optical Power LED (ATON ) LW M67C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version.
MehrHyper PointLED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG P47K. Vorläufige Daten / Preliminary Data
Hyper PointLED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG P47K Vorläufige Daten / Preliminary Data reverse mount top mount Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse,
MehrSOCKET AND RING Lead (Pb) Free Product - RoHS Compliant. Sleeves and Ring for 3 mm and 5 mm LED. full production
2006-06-12 SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant Sleeves and Ring for 3 mm and 5 mm LED full production Applications Signal lamp for front panel installation using clip mounting and a
MehrHyper CHIPLED Hyper-Bright LED LW Q183. Vorläufige Daten / Preliminary Data
Hyper CHIPLED Hyper-Bright LED LW Q183 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SM Gehäuse 63 Besonderheit des Bauteils: kleinste Bauform 1,6x,8x,6mm(LxBxH) Farbort: x =,31, y
MehrTOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG. Not for new design-ins acc.
TOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG Not for new design-ins acc. OS-NFND-212-4 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse,
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4230
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 423 Wesentliche Merkmale Punktlichtquelle mit hohem Wirkungsgrad bei
MehrHyper SIDELED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW A6SG
Hyper SIDELED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW A6SG Released Abkündigung nach OS-PD-29-9 Obsolete acc. to OS-PD-29-9 Besondere Merkmale Gehäusetyp:
MehrPower TOPLED Hyper-Bright LED LY E675
Power TOPLED Hyper-Bright LED LY E675 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad; höhere Umgebungstemperatur bei gleichem
MehrHyper SIDELED Enhanced optical Power LED (ATON ) Lead (Pb) Free Product - RoHS Compliant LW A67C
Hyper SIDELED Enhanced optical Power LED (ATON ) Lead (Pb) Free Product - RoHS Compliant LW A67C Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbiger diffuser Verguss Besonderheit des Bauteils:
MehrMini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670
Mini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: kleine Bauform 2,3 mm x 1,3 mm x 1,4 mm Wellenlänge: 628 nm (super-rot),
MehrMicro SIDELED Enhanced optical Power LED (ATON ) LW Y87C. Vorläufige Daten Preliminary Data
Micro SIDELED Enhanced optical Power LED (AON ) LW Y87C Vorläufige Daten Preliminary Data Besondere Merkmale Gehäusetyp: weißes SM Gehäuse Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik;
MehrTOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG. Not for new design-ins acc.
TOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG Not for new design-ins acc. OS-NFND-212-4 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse,
MehrInfrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281
Infrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281 Wesentliche Merkmale Emissionswellenlänge 88 nm Homogene Abstrahlcharakteristik Anwendungen Miniaturlichtschranken für Gleich-
MehrMulti TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T770. Nicht für Neuentwicklungen Not for new designs
Multi TOPLED RG Lead (Pb) Free Product - RoHS Compliant Nicht für Neuentwicklungen Not for new designs Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils:
MehrDiamond DRAGON Lead (Pb) Free Product - RoHS Compliant LD W5AP, LB W5AP, LT W5AP. Vorläufige Daten / Preliminary Data
Diamond DRAGON Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: schwarzes SMD-Gehäuse, farbloser klarer Silikon - Verguss, Silikon - Linse Typischer
MehrCeramic TopLooker for high light output, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant LW C9SP CERAMOS TM.
Ceramic TopLooker for high light output, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant CERAMOS TM Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss Besonderheit
MehrMicro SIDELED 0.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y2SG
Micro SIDELED.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y2SG abgekündigt nach PDN 29-6 / discontinued acc. PDN 29-6 Vorläufige Daten / Preliminary Data Besondere
MehrGolden DRAGON Lead (Pb) Free Product - RoHS Compliant LD W5SM, LB W5SM, LT W5SM. Released
Golden DRAGON Lead (Pb) Free Product - RoHS Compliant Released Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Silikon - Verguss Typischer Lichtfluss: 34 mw (tief blau); 19 lm (blau);
MehrDiamond DRAGON Lead (Pb) Free Product - RoHS Compliant LUW W5AP. Vorläufige Daten / Preliminary Data
Diamond DRAGON Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: schwarzes SMD-Gehäuse, farbloser klarer Silikon-Verguss, Silikon-Linse; Chip level
MehrMicro SIDELED Enhanced optical Power LED (ATON ) LW Y87C
Micro SIDELED Enhanced optical Power LED (ATON ) LW Y87C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version. Besondere
MehrGolden DRAGON with Lens Enhanced Optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW W55M. Vorläufige Daten / Preliminary Data
Golden DRAGON with Lens Enhanced Optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW W55M Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer
MehrHyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW 3333
Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW 3333 Abgekündigt nach OS-PD-21-1 - wird nicht ersetzt werden. obsolete acc. to OS-PD-21-1 - no replacement.
MehrLeistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter SFH 4209
Leistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter SFH 429 Wesentliche Merkmale Leistungsstarke GaAs-LED (4mW) Hoher Wirkunsgrad bei kleinen Strömen Typische Peakwellenlänge 95nm Anwendungen
MehrHyper TOPLED White LED LW T676
Hyper TOPLED White LED Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version. Besondere Merkmale Gehäusetyp: weißes
MehrGolden Dragon 1 Watt LED LA W57B, LY W57B
Golden Dragon 1 Watt LED LA W57B, LY W57B Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute bei geringem Platzbedarf Wellenlänge: 617
MehrGolden DRAGON Lead (Pb) Free Product - RoHS Compliant LA W57B, LY W57B
Golden DRAGON Lead (Pb) Free Product - RoHS Compliant LA W57B, LY W57B Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Punktlichtquelle mit hoher
MehrSemiconductors designed. Assembly methods: hand made parts Verarbeitungsmethode: Handbestückung
2006-06-12 Enstackable clips Lead (Pb) Free Product - RoHS Compliant Enstackable clips for 3 mm and 5 mm LED (black) full production Features: Besondere Merkmale: Package: enstackable clips for 3 mm and
MehrMini SIDELED LS C870, LO C870, LY C870, LG C870, LP C870
Mini SIDELED LS C870, LO C870, LY C870, LG C870, LP C870 Nicht für Neuentwicklungen - wird durch Micro SIDELED ersetzt werden Not for new designs - will be replaced by Micro SIDELED Besondere Merkmale
MehrSmartLED Lead (Pb) Free Product - RoHS Compliant LW L28G
SmartLED 63 Lead (Pb) Free Product - RoHS Compliant LW L28G Besondere Merkmale Gehäusetyp: SMT Footprint 63, farbiger diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,7 x,8 x,65 mm (LxBxH);
MehrGaAlAs-Lumineszenzdiode (660 nm) GaAlAs Light Emitting Diode (660 nm) SFH 4860
GaAlAs-Lumineszenzdiode (66 nm) GaAlAs Light Emitting Diode (66 nm) SFH 486 Wesentliche Merkmale Hergestellt im Schmezepitaxieverfahren Kathode galvanisch mit dem Gehäuseboden verbunden Hohe Zuverlässigkeit
MehrSilizium-Fotodiode für den sichtbaren Spektralbereich Silicon Photodiode for the Visible Spectral Range BPW 21
Silizium-Fotodiode für den sichtbaren Spektralbereich Silicon Photodiode for the Visible Spectral Range BPW 21 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 350 nm bis 820 nm Angepaßt
MehrDiamond DRAGON Lead (Pb) Free Product - RoHS Compliant LUW W5AP. Vorläufige Daten / Preliminary Data
Diamond DRAGON Lead (Pb) Free Product - RoHS Compliant LUW W5AP Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: schwarzes SMD-Gehäuse, farbloser klarer Silikon-Verguss, Silikon-Linse;
Mehr