Magnetic inductive flow sensors Series induq VMI Advantages Robust metal housing Nominal diameter DN 7, DN 1 and DN 2 Wide measuring range 1:6 (1:5) Frequency or analogue and frequency output Delivery inlcuding works calibration certificate Type VMI2 / VMI1 Free pipe cross-section 76
Type VMI7 VMI1 VMI2 Characteristics Nominal diameter DN 7 DN 1 DN 2 Process connection G½-ISO 228 male G½-ISO 228 male G 1-ISO 228 male or G¾-ISO 228 Flow range.5...3 l/min 1...6 l/min 5...25 l/min Accuracy* ±1.5 % of reading ±.3 % of range Repeatability* 1 % Response time <5 ms Signal output starting from Approx..4 l/min Approx..9 l/min Approx. 4 l/min Medium / min. conductivity of medium Water and other conductive liquids / 5 µs/cm Medium temperature 5...9 C Ambient temperature Min. 5 C, max. see figure temperature limits Pressure rating PN 16 Flow indication LED green, flow proportional flashing Degree of protection EN 29 IP (with attached cable socket) Electrical data Electrical connection Plug connector x 1 Power supply 24 VDC (±1 %) Current consumption 15 ma * Test conditions: Water 23 C at 2 ±1 µs/cm; standard pulse rate Temperature limits Ambient [ C] 7 6 5 4 3 2 1 upper limit Frequency output Frequency and analogue output lower limit 5 1 15 2 25 3 35 4 45 5 55 6 7 75 85 9 Medium [ C] 77
Three different versions available: Frequency output Analogue output 4...2 ma and frequency output Analogue output...1 V and frequency output Frequency output VMI7 VMI1 VMI2 Pulse rate Optional* 1 pulses/l 1...2 pulses/l 5 pulses/l 1...1 pulses/l 1 pulses/l 1...2 pulses/l Resolution Optional* 1. ml/pulse 1...5 ml/pulse 2. ml/pulse 1...1 ml/pulse 5 ml/pulse 1...5 ml/pulse Signal shape Signal current Square wave signal, pulse duty ratio 5:5, Push-Pull 1 ma, current limited Analogue output 4...2 ma VMI7 VMI1 VMI2 Corresponds to flow rate**..2 l/min or...3 l/min..4 l/min or...6 l/min...2 l/min or...25 l/min Max. burden 25 Ω against GND Analogue output...1 V VMI7 VMI1 VMI2 Corresponds to flow rate**..2 l/min or...3 l/min..4 l/min or...6 l/min...2 l/min or...25 l/min * Factory configurable ** Other ranges available on request 78
Typical pressure drop VMI7 / VMI1 Typical pressure drop VMI2 225 125 Pressure drop p [mbar] 2 175 15 125 1 75 VMI7 VMI1 5 25 1 2 3 4 5 6 Pressure drop p [mbar] 1 75 5 25 5 1 15 2 25 Flow rate [l/min] Flow rate [l/min] VMI7 / VMI1 VMI2 Any unauthorized copying, Any unauthorized disclosure copying, distribution disclosure of this or document distribution and of its this contents document is strictly and its forbidden contents is strictly forbidden Weitergabe sowie Vervielfältigung Weitergabe sowie dieser Vervielfältigung Dokumente, Verwertung dieser Dokumente, und Mitteilung Verwertung ihres Inhalts und Mitteilung sind verboten, ihres Inhalts sind verboten, unless specifically authorised. unless specifically Any violation authorised. will lead Any to indemnity. violation will lead to indemnity. soweit nicht ausdrücklich soweit gestattet. nicht ausdrücklich Zuwiderhandlungen gestattet. verpflichten Zuwiderhandlungen zu Schadenersatz. verpflichten zu Schadenersatz. All rights reserved, particularly All rights reserved, in the event particularly of patent in grant, the event registration of patent of grant, a utility registration model or design of a utility patent. model or design Alle patent. Rechte für den Fall Alle der Rechte Patent-, für den Gebrauchsmuster- Fall der Patent-, oder Gebrauchsmuster- Geschmacksmustereintragung oder Geschmacksmustereintragung vorbehalten. vorbehalten. SIKA Company Group, SIKA Kaufungen, Company Germany Group, Kaufungen, Germany SIKA Unternehmensgruppe, SIKA Unternehmensgruppe, Kaufungen, Deutschland. Kaufungen, Deutschland. G 1/2A G 1/2A SW 27 SW 27 12 12 14 14 LED LED 124 x1 124 x1 26 26 75 75 33 33 n7/n1 n7/n1 Weitergabe sowie Vervielfältigung dieser Dokumente, Verwertung und Mitteilung ihres Inhalts sind verboten, soweit nicht ausdrücklich gestattet. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patent-, Gebrauchsmuster- oder Geschmacksmustereintragung vorbehalten. Any unauthorized copying, disclosure or distribution of this document and its contents is strictly forbidden (Verwendungsbereich) (Zul. Abw.) (Oberfläche) Maßstab: 1:1 (Gewicht) (Werkstoff, Halbzeug) Katalogabbildung ISO 2768-m DIN ISO 132 (SIKA-Artikelnummer) VMI7.../ VMI1.../ VMI2... Datum Name SW 34 Bearb. 18.1.212 Thomas Abmessungen VMI 7/1/2 für (Verwendungsbereich) Gepr. (Zul. Abw.) 6.1.216(Oberfläche) Thomas Maßstab: 1:1 (Gewicht) Norm (Werkstoff, SW Halbzeug) 34 Datenblatt Katalogabbildung ISO 2768-m DIN ISO 132 Dr. Siebert & Kühn (SIKA-Artikelnummer) VMI7.../ VMI1.../ VMI2... Blatt GmbH & Co KG LED Struthweg Datum 7-9 Name MID-313 1 a Laschen optiona 1.12.15 CT Bearb. 3426 Kaufungen 18.1.212 Thomas 3 Bl. Zust Änderung Datum Name Gepr. (Urspr.:) Abmessungen (Ers. f.:) VMI (Ers. 7/1/2 d.:) für 6.1.216 Thomas Norm Datenblatt LED Dr. Siebert & Kühn GmbH & Co KG Struthweg 7-9 3426 Kaufungen a Laschen optiona 1.12.15 CT Zust Änderung Datum Name (Urspr.:) unless specifically authorised. Any violation will lead to indemnity. All rights reserved, particularly in the event of patent grant, registration of a utility model or design patent. SIKA Unternehmensgruppe, Kaufungen, Deutschland. SIKA Company Group, Kaufungen, Germany G 1A G 1A 18 18 14 14 Blatt MID-313 1 3 Bl. (Ers. f.:) (Ers. d.:) 14 14 x1 x1 29 29 75 75 n2 n2 35,5 35,5 (Verwendungsbereich) (Zul. Abw.) Bearb. Gepr. Norm Dr. Siebert & Kühn GmbH & Co KG Struthweg 7-9 3426 Kaufungen a Laschen optiona 1.12.15 CT Zust Änderung Datum Name (Urspr.:) (Oberfläche) Katalogabbildung ISO 2768-m DIN ISO 132 Datum Name 18.1.212 Thomas 6.1.216 Thomas Maßstab: 1:1 (Werkstoff, Halbzeug) (SIKA-Artikelnummer) Abmessung (Ers. f.:) Materials Electrodes Stainless steel 1.4571 Process connections Stainless steel 1.4571 Measuring pipe PEEK-GF3 O-rings EPDM / FKM Housing Casted aluminium 79
Order code Example VMI 7A SS YGX Type VMI VMI Nominal diameter / Process connection DN 7 / G½ male thread and analogue signal 4...2 ma and analogue signal...1 V...2 l/min...3 l/min...2 l/min...3 l/min 7A 7A 7A 7A 7A YGX YGI5 YGI YGU5 YGU DN 1 / G½ male thread and analogue signal 4...2 ma and analogue signal...1 V...4 l/min...6 l/min...4 l/min...6 l/min 1A 1A 1A 1A 1A YGX YGI5 YGI YGU5 YGU DN 1 / G¾ male thread and analogue signal 4...2 ma and analogue signal...1 V...4 l/min...6 l/min...4 l/min...6 l/min 1C 1C 1C 1C 1C YGX YGI5 YGI YGU5 YGU DN 2 / G1 male thread and analogue signal 4...2 ma and analogue signal...1 V...2 l/min...25 l/min...2 l/min...25 l/min 2A 2A 2A 2A 2A YGX YGI5 YGI YGU5 YGU Mounting straps Without (standard) With mounting straps SS LS Material O-rings EPDM (Standard) FKM (Option) 1
Accessories Length Order code Connection cable with 4-pin cable socket x 1, angle type moulded lead, sheathing material PUR, shielded, (T max = C) UL-approval 3 m 5 m 1 m XVT253 XVT29 XVT27 81