Ref: GA14DEUK CRL Glasvordachsysteme CRL Glass Awning Systems Exzellente Ganzglasoptik, brilliantes Design Give any entrance an uncomplicated, graceful look, enhancing the design of any building.
CRL Glasvordachsysteme CRL Glass Awning Systems 02 Für weitere Informationen For more information Kostenloser Anruf unter Freephone 00 0421 6144 (UK & Europe)
CRL Vordachsystem / CRL Awning Kit for /mm Projection Glass Canopy 770 680 640 550 AbZ Allgemeine bauaufsichtliche Zulassung Typenstatik vorhanden Edelstahl A2 (1.4301) - Korrosionswiderstandsklasse II, DIN EN 10088 Glasdicke von 17,52mm bis 21,52mm Edelstahl A4 auf Anfrage 770 680 640 550 Auf Anfrage / On request AbZ Certified Sold as set AISI 304 Grade Stainless Steel Brushed Stainless Steel finish Corrosion protection class 2, DIN EN 10088 Glass thickness range 17,52mm to 21,52mm Material Grade 316 Stainless Steel available on request Set bestehend aus: 4 Punkthalter Ø 45mm mit Lasche 2 Befestigungsplatten oben 2 Befestigungsplatten unten 2 n mit Gabel ohne Glas Set consisting of: 4 point fittings Ø 45mm with mounting link 2 upper fastening plates 2 lower fastening plates 2 tie rods with yoke without glass Z2: mm tie rod centre to centre 770 680 640 550 Z1: 820mm Glas: VSG aus TVG mit Vierfachfolie 8/1,52/8mm oder 10/1,52/10mm Glass: laminated safety glass consisting of heat strengthened glass with quadruple foil 8/1.52/8mm or 10/1.52/10mm 250 ALLGEMEINE BAUAUFSICHTLICHE ZULASSUNG 250-1400 * * maximaler nabstand * max. tie rod distance * * 2400 n Tie rods Halter Glasstärke Fittings Glass thickness 2 4 2 x 8 mm 2,16 kn/m 2 max. Designlast max. design load 2 4 2 x 10 mm 3,43 kn/m 2 3 6 2 x 8 mm 1,84 kn/m 2 3 6 2 x 10 mm 2,95 kn/m 2 Bei 3 Stück Zustangen bitte zusätzlich zum Set Artikel EUGAS1BS bzw. EUGAS1BS bestellen. Please order for 3ea rod additional CAT.NO. EUGAS1BS / EUGAS1BS. Befestigungsplatte Fastening plates Ausladung Tie rod Neigung Dach Canopy slope EUGASBS Rechteckig - Rectangular CRL Vordachsystem CRL Awning Kit for mm EUGASBS Rechteckig - Rectangular CRL Vordachsystem CRL Awning Kit for mm - mm Z1 (820mm) max. 10 250 - mm Z2 (mm) max. 10 Kostenloses Fax unter Freefax 00 0262 3299 Email: CRL@crlaurence.de CRL@crlaurence.co.uk crlaurence.de crlaurence.co.uk 03
CRL Vordachsystem 1 CRL Awning Kit for 1mm Projection Glass Canopy AbZ Allgemeine bauaufsichtliche Zulassung Typenstatik vorhanden Edelstahl A2 (1.4301) - Korrosionswiderstandsklasse II, DIN EN 10088 Glasdicke von 21,52mm bis 25,52mm Edelstahl A4 auf Anfrage 950 830 Auf Anfrage / On request AbZ Certified Sold as set AISI 304 Grade Stainless Steel Brushed Stainless Steel finish Corrosion protection class 2, DIN EN 10088 Glass thickness range 21,52mm to 25,52mm Material Grade 316 Stainless Steel available on request 1 Set bestehend aus: 4 Punkthalter Ø 60mm mit Lasche 2 Befestigungsplatten oben 2 Befestigungsplatten unten 2 n mit Gabel ohne Glas Set consisting of: 4 point fittings Ø 60mm with mounting link 2 upper fastening plates 2 lower fastening plates 2 tie rods with yoke without glass Z3: 1250mm tie rod centre to centre 1 1 950 830 Ø26 ALLGEMEINE BAUAUFSICHTLICHE ZULASSUNG Glas: VSG aus TVG mit Vierfachfolie 10/1,52/10mm oder 12/1,52/12mm Glass: laminated safety glass consisting of heat strengthened glass with quadruple foil 10/1.52/10mm or 12/1.52/12mm 1 1 - * 1 * maximaler nabstand * max. tie rod distance 1 1050 * 1050 * 2700 Bei 3 Stück Zustangen bitte zusätzlich zum Set Artikel EUGAS11BS bestellen. Please order for 3ea rod additional CAT.NO. EUGAS11BS. n Tie rods 2 4 2 x 10 1 mm 3,01 kn/m 2 1 Halter Fittings Glasstärke Glass thickness max. Designlast max. design load 2 4 2 x 12 mm 4,43 kn/m 2 3 6 2 x 10 mm 2,55 kn/m 2 3 6 2 x 12 mm 3,89 kn/m 2 Ø26 Befestigungsplatte Fastening plates Ausladung Tie rod Neigung Dach Canopy slope EUGAS1BS Rechteckig - Rectangular CRL Vordachsystem 1 CRL Awning Kit for 1mm - 1mm Z3 (1250mm) max. 10 04 Für weitere Informationen For more information Kostenloser Anruf unter Freephone 00 0421 6144 (UK & Europe)
CRL Vordachsystem / CRL Awning Kit for /mm Projection Glass Canopy AbZ Allgemeine bauaufsichtliche Zulassung Typenstatik vorhanden Edelstahl A2 (1.4301) - Korrosionswiderstandsklasse II, DIN EN 10088 Glasdicke von 21,52mm bis 25,52mm Edelstahl A4 auf Anfrage 1659 1564 1458 1337 1304 1205 1092 1400 1500 1700 1 1 Set bestehend aus: 4 Punkthalter Ø 80mm mit Lasche 2 Befestigungsplatten oben 2 Befestigungsplatten unten 2 n mit Gabel ohne Glas Auf Anfrage / On request Set consisting of: 4 point fittings Ø 80mm with mounting link 2 upper fastening plates 2 lower fastening plates 2 tie rods with yoke without glass AbZ Certified Sold as set AISI 304 Grade Stainless Steel Brushed Stainless Steel finish Corrosion protection class 2, DIN EN 10088 Glass thickness range 21,52mm to 25,52mm Material Grade 316 Stainless Steel available on request Z5: 2100mm 1659 1564 1458 1337 1304 1205 1092 Z4: 1615mm tie rod centre to centre 1 1 1700 1500 1400 350 350 Ø30 ALLGEMEINE BAUAUFSICHTLICHE ZULASSUNG tie rod centre to centre Glas: VSG aus TVG mit Vierfachfolie 10/1,52/10mm oder 12/1,52/12mm Glass: laminated safety glass consisting of heat strengthened glass with quadruple foil 10/1.52/10mm or 12/1.52/12mm 1400 1500 1700 1 1 1 * * maximaler nabstand * max. tie rod distance 1 * 1 * 3 n Tie rods Halter Fittings Glasstärke Glass thickness max. Designlast max. design load 2 4 2 x 10 mm 2,07 kn/m 2 2 4 2 x 12 mm 3,09 kn/m 2 3 6 2 x 10 mm 1,27 kn/m 2 3 6 2 x 12 mm 1,83 kn/m 2 Bei 3 Stück Zustangen bitte zusätzlich zum Set Artikel EUGAS1BS bzw. EUGAS1BS bestellen. Please order for 3ea rod additional CAT.NO. EUGAS1BS / EUGAS1BS. Befestigungsplatte Fastening plates 1 1 1700 1500 1400 Ausladung Tie rod 350 Neigung Dach Canopy slope Ø30 EUGASBS Rechteckig - Rectangular CRL Vordachsystem CRL Awning Kit for mm 1400 - mm Z4 (1615mm) max. 10 350 EUGASBS Rechteckig - Rectangular CRL Vordachsystem CRL Awning Kit for mm 1700 - mm Z5 (2100mm) max. 10 Kostenloses Fax unter Freefax 00 0262 3299 Email: CRL@crlaurence.de CRL@crlaurence.co.uk crlaurence.de crlaurence.co.uk 05
80 / 280 / 640 120 186 80 CRL Vordachsystem 785 CRL Awning Brackets for 785mm Projection Glass Canopy TRPV Konform Typenstatik vorhanden Edelstahl A2 (1.4301) - Korrosionswiderstandsklasse II, DIN EN 10088 Glasdicke von 13,52mm bis 17,52mm Sold as set proven static available AISI 304 Grade Stainless Steel Corrosion protection class 2, DIN EN 10088 Glass thickness range 13,52mm bis 17,52mm Set bestehend aus: 2 Schwerter 4 Punkthalter Ø 60 mm mit Gabelstück ohne Glas Set consisting of: 2 blades 4 point fittings Ø 60mm with yoke without glass / mm 80 640 80/280 3,6 785 Glas: VSG aus TVG mit Vierfachfolie 6/1,52/6 mm oder 8/1,52/8 mm Glass: laminated safety glass consisting of heat strengthened glass with quadruple foil 6/1.52/6 mm or 8/1.52/8 mm Schwerter blades Ausladung Glasstärke Glass thickness 2 2 x 6 mm 1,98 kn/m 2 CRL Vordachsystem 774 CRL Awning Brackets for 774mm / * * maximaler Abstand * max. distance / 5/925 850/950 2050-2500 2 2 x 8 mm 4,14 kn/m 2 2 2 x 6 mm 1,34 kn/m 2 2 2 x 8 mm 2,70 kn/m 2 3 x 2 2 x 6 mm 1,50 kn/m 2 (850) 3 x 2500 2 x 8 mm 2,00 kn/m 2 (950) 3 x 2050 2 x 6 mm 1,50 kn/m 2 (5) 3 x 2450 2 x 8 mm 1,50 kn/m 2 (925) ** max. charakt. Last max. charact. load Bei 3 Stück Schwerter bitte zusätzlich zum Set Artikel EUGAB1001BS bestellen. Please order for 3ea blade additional CAT.NO. EUGAB1BS. Punkthalter Schwert Blade Auslandung Neigung Dach Canopy slope EUGABBS CRL Vordachsystem 774 CRL Awning Brackets for 774mm Projection Glass Canopy Ø 60mm 785mm -mm max. 3,6 06 Für weitere Informationen For more information Kostenloser Anruf unter Freephone 00 0421 6144 (UK & Europe)
CRL Vordachsystem Elemente CRL Awning single components MÖGLICHERWEISE BRAUCHEN SIE AUCH YOU MAY ALSO need... Variante Option EUGAS45PF EUGAS60PF EUGAS80PF EUGAS820R0D EUGASR0D EUGAS1250R0D EUGAS1615R0D EUGAS2100R0D EUGASU Ø 45 mm Ø 60 mm Ø 80 mm Z1 820 mm (Small) Z2 mm (Small) Z3 1250 mm (Medium) Z4 1615 mm (Large) Z5 2100 mm (Large) Rechteckig Rectangular Punkthalter mit Lasche point fitting with link mit Gabel tie rod with yoke Befestigungsplatte oben upper fastening plate EUGASL Rechteckig Rectangular Befestigungsplatte unten lower fastening plate EUGASRDU Rund Round Befestigungsplatte oben upper fastening plate EUGASRDL Rund Round Befestigungsplatte unten lower fastening plate EUGASSQU Quadratisch Square Befestigungsplatte oben upper fastening plate EUGASSQL Quadratisch Square Befestigungsplatte unten lower fastening plate EUGASWRENCH45 EUGASWRENCH80 Ø 45-60 mm Ø 80 mm Hakenschlüssel für Punkthalter hook wrench for point fittings EUGAS45DPF EUGAS60DPF Ø 45 mm Ø 60 mm Punkthalter mit Spider - Glasverbinder für Bestigungsplatte unten und point fitting with spider - glass connector for lower fastening plate and tie rod Kostenloses Fax unter Freefax 00 0262 3299 Email: CRL@crlaurence.de CRL@crlaurence.co.uk crlaurence.de crlaurence.co.uk 07
KOSTENLOSER Anruf unter 00 0421 6144 KOSTENLOSES Fax unter 00 0262 3299 Call FREE on 00 0421 6144 Fax FREE on 00 0262 3299 CRL verfügt über ein umfangreiches Sortiment an Geländersysteme... View Our Full Range of Architectural Railing Systems... Manchester Charles Babbage Avenue Kingsway Business Park, Rochdale, OL16 4NW, England Tel: +44 (0) 1706 863 600 Fax: +44 (0) 1706 869 860 www.crlaurence.co.uk Stuttgart Boschstrasse 7 D-74360 Ilsfeld Germany Tel: +49 (0) 7062 915 93 15 Fax: +49 (0) 7062 915 93 16 www.crlaurence.de Copenhagen Stamholmen 70 Unit B, DK-2650 Hvidovre Denmark Tel: +45 36 09 00 Fax: +45 36 70 33 35 www.crlaurence.dk France Boschstrasse 7 D-74360 Ilsfeld Germany Tel: +49 (0) 7062 915 93 15 Fax: +49 (0) 7062 915 93 16 www.crlaurence.fr In unserem EUHR11 Katalog erfahren Sie mehr über: Glasgeländer / Balustraden Das Taper-Loc System Türsysteme für Glasgeländer Pfostensysteme Schweißkonstruktionen Handlaufsysteme Windfangsysteme Aluminiumsysteme Trennwandsysteme und Windfanganlagen Werkzeuge und Zubehör Dies könnte Sie auch noch interessieren... Unser Master Katalog EUCRL63R beinhaltet: Zubehör für den Metallbau Türschienen und Trennwandsysteme für Ganzglasanlagen Türschließer Mittel und Eckschlösser plus Zubehör Glasklemmen Türschienen und Profile Griffstangen Überschub-, Fallen-, Eck- und Mittelschlösser Türschließer und Beschläge Eckbeschläge für Anschlag- und Pendeltüren Drehtürsysteme Griffgarnituren, Drücker Schiebe- und Faltanlagen Spiderarme und Punkthalter Abstandshaltersysteme Download oder Ansicht von Kataloge über: crlaurence.de Our EUHR11 Architectural Balustrade and Railing Systems Catalogue Glass Railings/Balustrades TAPER-LOC Railing System Swinging Gate Systems Post Railing Systems Welded Railing Systems Hand Railing Systems Aluminium Railing Systems Glass Walls/Windscreens Tools/Accessories You may also be interested in... EUAH11 Architectural Hardware All Glass Entrance Systems Catalogue Architectural Metals Door and Sidelite Rails Door Closers Centre Locks Glass Clamps Headers and Channels Ladder Pulls Locking Hardware Door Closers and Hinges Patch Hardware Pivot Door Systems Push/Pull Handles Sliding and Stacking Glass Door Systems Spider Fittings Standoff Systems Catalogues are available to download or view online at crlaurence.co.uk