Drop-In System Inhalt/Content 2-3 Übersicht Overview 4-7 8-9 für Assembly notes for valve gate nozzle Ø 6 mm Alle Maße in diesem Katalog beziehen sich auf EWIKON Heißkanalkomponenten im aufgeheizten Betriebszustand All dimensions in this catalogue refer to EWIKON hotrunner components in heated operating condition Kap02.6 NV_D.indd - 1 -
Drop-In System Übersicht der Versionen Außenbeheizt, mit Spitzendichtung Düsenlänge X: 70 / 80 / 90 / 100 / 120 / 140 / 160 / 180 Versions overview Externally heated, with tip sealing technology Nozzle length X: 70 / 80 / 90 / 100 / 120 / 140 / 160 / 180 -D6: Düsenspitze mit Nadelführung, Kontur direkt im Einsatz -D6: Nozzle insert with valve pin guide, contour directly in the insert -E: -F: Düsenspitze mit Nadelführung, Schraubvorkammer Düsenspitze mit Nadelführung, verlängerte Schraubvorkammer für die Verarbeitung von TPE und TPU: -D3: Düsenspitze mit Nadelführung und Wärmeleitelement, Kontur direkt im Einsatz -E: -F: Nozzle insert with valve pin guide, screw-on gate bush Nozzle insert with valve pin guide, extended screw-on gate bush For the processing of TPE and TPU: -D3: Nozzle insert with valve pin guide and heat conducting element, contour directly in the insert -E3: Düsenspitze mit Nadelführung, und Wärmeleitelement, Schraubvorkammer -E3: Nozzle insert with valve pin guide and heat conducting element, screw-on gate bush -F3: Düsenspitze mit Nadelführung und Wärmeleitelement, verlängerte Schraubvorkammer -F3: Nozzle insert with valve pin guide and heat conducting element, extended screw-on gate bush Bestellbeispiel/Ordering example: NV95063.070 D2 0.8 ØD der Nadel im Anschnittbereich Valve pin ØD in the gate area Ausführung der Spitze/Schraubvorkammerbuchse Version of tip/screw-on gate bush Type Maß/Dim. X Kap02.6 NV_D.indd - 2 -
Drop-In System Übersicht der Versionen Versions overview Kap02.6 NV_D.indd - 3 - z309-02
Drop-In System Version -D6/-D3 Anspritz-Ø D: min 0,8 mm, max. 2,0 mm Version -D6/-D3 Gate-Ø D: min. 0.8 mm, max. 2.0 mm Kap02.6 NV_D.indd - 4 -
Drop-In System Version -D6/-D3 Version -D6/-D3 z309-04 Kap02.6 NV_D.indd - 5 -
Drop-In System Version -E6/-E3 Anspritz-ØD: min 0,8 mm, max. 2,0 mm Version -E6/E3 Gate-ØD: min. 0.8 mm, max. 2.0 mm z309-10 Kap02.6 NV_D.indd - 6 -
Drop-In System Version -F6/F3 Anspritz-ØD: min 0,8 mm, max. 2,0 mm Version -F6/F3 Gate-ØD: min. 0.8 mm, max. 2.0 mm z309-11 Kap02.6 NV_D.indd - 7 -
Drop-In System D6/D3 Einbaugeometrie im Anspritzbereich Einbau ohne Vorkammer Empfehlung: Kontur vorfertigen und auf 52 HRC härten. 52 HRC? Dann Anspritzgeometrien und Passung fertigstellen. Assembly notes D6/D3 Installation geometry in the gate area Installation without gate bush Recommendation: Machine contour and harden to 52 HRC. Afterwards machine gate geometry and fit. z309-14 Kap02.6 NV_D.indd - 8 -
Drop-In System Einbaugeometrie im Anspritzbereich Einbau mit Schraubvorkammer Assembly notes Installation geometry in the gate area Installation with screw-on gate bush z309-15 Kap02.6 NV_D.indd - 9 -