Werkzeugkatalog tool catalogue APEX Revolver / turret BMT 45 - DIN 5480 PT - 12 PT - 16
Hinweis zu den AGBs: Diese finden Sie in unserem Internetauftritt unter Home/Impressum/AGB Terms and conditions: You will find them on our website www.heimatec.com Home/Imprint/Terms and Conditions Das Katalog-Werk einschließlich aller seiner Teile ist urheberrechtlich geschützt. Jede Verwertung außerhalb der engen Grenzen des Urheberrechtsgesetzes ist ohne Zustimmung der Rechteeinhaber unzulässig und strafbar. Das gilt insbesondere für Vervielfältigungen, Übersetzungen, Mikroverfilmungen und die Einspeicherung und Verarbeitung in elektronischen Systemen. heimatec GmbH behält sich Änderungen technischer Art jederzeit ohne Vorankündigung vor. Dies gilt inbesondere bei Anpassungen an neue oder geänderte internationale Normen oder bei Weiterentwicklungen unserer Produkte oder Herstellungsprozesse. This catalogue, including all its parts, is protected by copyright. Each use outside the restricted limitations of the Copyright Act is inadmissible and liable to prosecution without the consent of heimatec. This is particularly valid for duplication, translation, microfi lming and feeding and processing in electronic systems. heimatec GmbH reserves the right of technical changes everytime without advance notice, which is particularly valid for adaptions to new or changed international standards, or to developments of our products or manufacturing processes. Copyright by heimatec GmbH, Technische Änderungen vorbehalten / subject to technical changes
Lieferprogramm - Standard delivery programme - standard angetriebene Werkzeuge driven tools Axial-Bohr- und Fräskopf axial drilling and milling head n max = 6000 min -1 Kombilagerung / combi bearing 8 010 45 123 ER 25 AX u-tec EK 1:1 8 010 45 124 ER 25 AX u-tec IK 25 bar 1:1 8 010 45 125 ER 25 AX u-tec IK 70 bar 1:1 Axial-Bohr- und Fräskopf axial drilling and milling head 8 010 45 120 ER 25 AX u-tec EK 1:1 8 010 45 121 ER 25 AX u-tec IK 25 bar 1:1 n max = 8000 min -1 8 010 45 122 ER 25 AX u-tec IK 70 bar 1:1 n max = 6000 min -1 Winkel-Bohr- und Fräskopf radial drilling and milling head Mittenmaß / center distance H=65 n max = 8000 min -1 8 030 45 250 ER 25 AX u-tec EK 1:1 8 030 45 252 ER 25 AX u-tec IK 140 bar 1:1 Winkel-Bohr- und Fräskopf radial drilling and milling head Mittenmaß / center distance H=85 8 030 45 256 ER 25 AX u-tec EK 1:2 8 030 45 257 ER 25 AX u-tec IK 140 bar 1:2 n max = 12000 min -1 8 030 45 258 ER 25 AX u-tec EK 1:3 8 030 45 259 ER 25 AX u-tec IK 140 bar 1:3 n max = 18000 min -1 Winkel-Bohr- und Fräskopf radial drilling and milling head Mittenmaß / center distance H=65 doppelspindlig / double spindle n max = 6000 min -1 8 039 45 093 ER 25 AX u-tec EK 1:1 Schwenkkopf universal head Mittenmaß / center distance H=69 Achsversatz / offset A=60 8 043 44 028 ER 16 AX u-tec EK 1:1 8 043 44 029 ER 16 AX u-tec IK 25 bar 1:1 n max = 6000 min -1 8 043 44 030 ER 16 AX u-tec EK 1:2 8 043 44 031 ER 16 AX u-tec IK 25 bar 1:2 n max = 12000 min -1 APEX Revolver / turret PT - 12 / 16 - BMT 45 DIN 5480 Winkel-Bohr- und Fräskopf radial drilling and milling head Mittenmaß / center distance H=80 doppelspindlig / double spindle n max = 8000 min -1 8 039 45 088 ER 25 AX u-tec EK 1:1 Winkel-Scheibenfräserkopf radial disk mill head Mittenmaß / center distance H=78 auf 0 absteckbar / 0 can be pinned n max = 4000 min -1 ±10 drehbar ±10 turnable 8 037 44 020 ø 16 EK 2:1 8 037 44 021 ø 5/8 EK 2:1 Weitere Ausführungen auf Anfrage further versions on request Zubehör ZB...* accessories ZB...* easy-quick u-tec Copyright by heimatec GmbH, Technische Änderungen vorbehalten / subject to technical changes 3
Lieferprogramm - Standard delivery programme - standard feste Werkzeuge static tool holders Kombi-Drehstahlhalter universal turning holder 8 224 04 022 Vierkant/square 20 EK 8 224 04 023 Vierkant/square 3/4 EK APEX Revolver / turret PT - 12 / 16 - BMT 45 DIN 5480 Kombi-Doppel-Drehstahlhalter combi double turning holder 8 251 04 016 Vierkant/square 20 EK 8 251 04 017 Vierkant/square 3/4 EK Kombi-Plandrehhalter combi facing holder 8 244 04 000 Vierkant/square 20 EK 8 244 04 007 Vierkant/square 3/4 EK Bohrstangenhalter boring bar holder Mittenmaß / center distance H=65 8 240 08 003 ø32 IK/EK 8 240 09 014 ø40 IK/EK 8 240 07 005 ø1 IK/EK 8 240 07 010 ø1 1/4 IK/EK 8 240 08 016 ø1 1/2 IK/EK Bohrstangenhalter boring bar holder Mittenmaß / center distance H=80 Doppel-Bohrstangenhalter double boring bar holder Mittenmaß / center distance H=55/90 8 253 07 012 2x ø25 IK/EK 8 253 05 000 2x ø3/4 IK/EK 8 253 07 013 2x ø1 IK/EK Abstechhalter cut-off holder höhenverstellbar / height adjustable 8 320 02 012 SH 26 IK 70 bar 8 240 08 017 ø32 IK/EK 8 240 09 015 ø40 IK/EK 8 240 07 011 ø1 IK/EK 8 240 07 012 ø1 1/4 IK/EK 8 240 08 018 ø1 1/2 IK/EK Bohrstangenhalter boring bar holder Mittenmaß / center distance H=85 8 240 08 021 ø32 IK/EK 8 240 09 017 ø40 IK/EK 8 240 07 019 ø1 IK/EK 8 240 07 015 ø1 1/4 IK/EK 8 240 08 022 ø1 1/2 IK/EK Abstechhalter cut-off holder höhenverstellbar / height adjustable 8 320 09 000 HORN System 845 IK 70 bar Abdeckplatte cover plate 8 200 99 000 Weitere Ausführungen auf Anfrage further versions on request Zubehör ZB...* accessories ZB...* easy-quick u-tec 4 Copyright by heimatec GmbH, Technische Änderungen vorbehalten / subject to technical changes
Infoblatt datasheet easy-quick HT Schnellwechselsystem easy-quick HT fast change system Ausführungen siehe Katalog versions see catalogue DAS Schnellwechselsystem von heimatec für angetriebene und feste Werkzeuge THE fast change system of heimatec for driven and static tools easy-quick HT Das Schnellwechselsystem von für angetriebene und feste Werkzeuge The fast change system of for driven and static tools Produkte / easy-quick www.heimatec.com products / easy-quick 5
Infoblatt datasheet u-tec UT Wechselsystem u-tec UT change system Ausführungen siehe Katalog versions see catalogue Unser Wechselsystem, das ALLES möglich macht Our change system, that makes EVERYTHING possible Produkte / u-tec www.heimatec.com products / u-tec 6 Copyright by heimatec GmbH, Technische Änderungen vorbehalten / subject to technical changes
Infoblatt datasheet Zubehör accessories Ausführungen siehe Katalog versions see catalogue Zubehör accessories Produkte / Zubehör www.heimatec.com products / accessories 7
heimatec -Niederlassungen heimatec overseas branches unsere weltweiten Vertretungen global representations of heimatec Germany Russia USA Taiwan Singapore Hauptsitz/headquarters heimatec GmbH Präzisionswerkzeuge Carl-Benz-Straße 4 D- 77871 Renchen Postfach 11 36 D- 77867 Renchen Tel.: +49 (78 43) 94 66 0 Fax: +49 (78 43) 94 66 66 heimatec.de info@heimatec.de heimatec Inc. USA usa.heimatec.com USA@heimatec.com heimatec -Ost, JSC Russia ru.heimatec.com Russia@heimatec.com heimatec Ltd. Taiwan tw.heimatec.com Taiwan@heimatec.com heimatec Singapore sg.heimatec.com Singapore@heimatec.com 2014/08