Solar modules S-series 12V

Transkript

1 Solar modules S-series 12V State 2012 SW 3066 SW 3062 SW 3063 SW 3065 SW 3061 SW 3064 Solar modules S-series 12V Solar modules with cable outlet front side mounted. Designed for boats, flat trucks, navigation aids, sea buoys, streetlamps and many other. Made in Germany. Product charateristics 100% sea- & saltwater resistant Non-Glass-module with unbreakable Nowoflon foil Mounting plate made from saltwater resistant, powder-coated stainless steel Cable output screwed, sealed and utterly water proof Crystalline cells of highest performance class for maximum power Ultraflat module construction (5mm), at cable output 15mm Connection cable of 3m length Rounded corners to prevent risk of injuries On the side, the laminate overhangs the mounting plate by approx. 5mm for a maximum of corrosion protection Structured surface reduces slip risks when wet 100% maintenance-free, self-cleaning surface Installation: without rear ventilation by use of solar modules with 40 cells; either adhesive, screws or SunWare-clips Walkable when installed on a solid surface (using boat shoes) Modules can be slightly bent till max. 3% (3cm/1 meter) 3 years warranty on power output

2 TECHNICL FETURES S-series 12V SW-3061 SW-3062 SW-3063 SW-3064 SW-3065 SW-3066 Power* [Wp] I sc [] 0,6 0,9 1,2 1,8 2,4 3,6 I max [] 0,55 0,83 1,1 1,65 2,2 3,3 Cell sizes [mm] 33 x x x x x x 100 Length [mm] Width B [mm] Bore holes (D=5,5mm) Weight netto [kg] 1,4 1,9 2,4 3,2 4,5 6,1 Weight brutto [kg] 2,4 3,0 3,4 4, Cable 2 [mm ] 2 x 1,5 2 x 1,5 2 x 1,5 3 x 1,5 3 x 1,5 3 x 1,5 Cell-protector yes yes yes Valid for all modules: Uoc = 24,6 V / laminate: ETFE, EV, stainless steel / 40 cells / for 12V-systems / individually packed / cable length 3m / carrier plate V (1.4571) pulver coated white / serial connection only permitted for 24V systems Environmental conditions : 40 up to + 85 C, thermal characteristic values: TK Isc: -1,1m/K, TK Uoc: -2,3 mv/k, TK Pmpp: mw/k * ccording to STC (standard test conditions), M 1,5, 1000 W/m², 25 C, measuring tolerance: 10%. Technical changes reserved. State 9/2012 DIMENSIONS 20 11, ,4 [] sc 1,0 0, W/m² / 25 C 0,8 0,7 0,6 0,5 500 W/m² / 25 C 0,4 0,3 0,2 200 W/m² / 25 C 0, U [ V] RNGE OF PPLICTIONS For motor boats and sailing yachts For camping and caravan For mobile current supply For industry, shipping and building sector B Technical drawings at

3 Solar modules S-series 24V State 2012 SW 3266 SW 3265 Solar modules S-series 24V 24V solar modules with cable outlet front side mounted. Designed for boats, flat trucks, navigation aids, sea buoys, streetlamps and many other. Made in Germany. Product charateristics 100% sea- & saltwater resistant Non-Glass-module with unbreakable Nowoflon foil Mounting plate made from saltwater resistant, powder-coated stainless steel Cable output screwed, sealed and utterly water proof Crystalline cells of highest performance class for maximum power Ultraflat module construction (5mm), at cable output 15mm Connection cable of 3m length Rounded corners to prevent risk of injuries On the side, the laminate overhangs the mounting plate by approx. 5mm for a maximum of corrosion protection Structured surface reduces slip risks when wet 100% maintenance-free, self-cleaning surface Installation without rear ventilation by module structure with 80 cells; gluing or with SunWare-clips Walkable when installed on a solid surface (using boat shoes) Modules can be slightly bent till max. 3% (3cm/1 meter) 3 years warranty on power output

4 TECHNICL FETURES S-series 24V SW-3265 SW-3266 Power* [Wp] Isc [] 1,2 1,8 I max [] 1,1 1,65 Cell sizes [mm] 33 x x 100 Length [mm] Width B [mm] Bore holes (D=5,5mm) 8 9 Weight netto [kg] 4,5 6,1 Weight brutto [kg] 6,3 8,5 Cable 2 [mm ] 3 x 1,5 3 x 1,5 Cell-protector yes yes Valid for all modules: Uoc = 48 V / laminate: ETFE, EV, stainless steel / 80 cells / für 24V-systems / individually packed / cable length 3m / carrier plate V (1.4571) pulver coated white / serial connection not permitted Environmental conditions : 40 up to + 85 C, thermal characteristic values: TK Isc: -1,1m/K, TK Uoc: -2,3 mv/k, TK Pmpp: mw/k *ccording to STC (standard test conditions), M 1,5, 1000 W/m², 25 C, measuring tolerance: 10%. Technical changes reserved. State 9/2012 DIMENSIONS 20 11, ,4 [] sc 1,0 0, W/m² / 25 C 0,8 0,7 0,6 0,5 500 W/m² / 25 C 0,4 0,3 0,2 200 W/m² / 25 C 0, U [ V] RNGE OF PPLICTIONS For motor boats and sailing yachts For camping and caravan For mobile current supply For industry, shipping and building sector B Technical drawings at

5 Solarmodule K-Serie 12V Stand 2012 SW 5066 SW 5065 Solarmodule K-Serie 12V Kompakt- Solarmodule, optimiert auf geringe bmessungen, mit vorderseitigem Kabelanschluss. Für Boote, Kastenwagen, Seezeichen, Mess-Stationen, Straßenlaternen u.v.m. - Made in Germany. Produkteigenschaften 100% see- & salzwasserbeständig Non-Glas-Modul mit bruchsicherer Nowoflon-Folie Trägerplatte aus seewasserbeständigem, pulverlackiertem Edelstahl Kabelausgang verschraubt, vergossen und seewasserdicht Kristalline Hochleistungs-Solarzellen für maximale Leistung Ultra flacher Modulaufbau (5mm), am Kabelausgang 15mm 3m nschlusskabel Folienrand 5mm über Trägerplatte überstehend für maximalen Korrosionsschutz bgerundete Ecken zur Vermeidung von Verletzungsgefahren Strukturierte Oberfläche mindert Rutschgefahr bei Nässe 100% wartungsfrei, selbstreinigende Moduloberfläche Montage ohne Hinterlüftung durch Modulaufbau mit 39 Zellen, Verkleben oder mit SunWare-Clips Begehbar bei fester Unterlage (mit Bootsschuhen) Module bis zu 3% krümmungsfähig (3cm/1 Meter) 3 Jahre Leistungsgarantie

6 TECHNISCHE DTEN K-Serie 12V SW-5065 SW-5066 Leistung* [Wp] Isc [] 2,4 3,6 I max [] 2,2 3,3 Zellformat [mm] 66 x x 100 Länge [mm] Breite B [mm] Bohrungen (D=4,5mm) 4 4 Gewicht netto [kg] 4,0 5,6 Gewicht brutto [kg] 5,4 7,6 Kabel 2 [mm ] 3 x 1,5 3 x 1,5 Zellprotektor ja ja Gültig für alle Module: Uoc = 24,6 V / Laminat: ETFE, EV, Edelstahl / 39 Zellen / für 12V-Systeme / Einzelverpackung / Kabellänge 3m / Trägerplatte V (1.4571) pulverlackiert weiß / Serienschaltung nur für 24V Systeme zulässig Umgebungsbedingungen: 40 bis + 85 C, Thermische Kennwerte: TK Isc: -1,1m/K, TK Uoc: -2,3 mv/k, TK Pmpp: mw/k *Nach STC (Standard Testbedingungen), M 1,5, 1000 W/m², 25 C, Meßtoleranz: 10%. Technische Änderungen vorbehalten. Stand 9/2012 BMESSUNGEN 15,4 46, ,50 KENNLINIE [] sc 1, W/m² / 25 C 0,9 0,8 0,7 0,6 0,5 500 W/m² / 25 C 0,4 0,3 0,2 200 W/m² / 25 C 0, U [ V] NWENDUNGSBEREICHE für Motorboote und Segelyachten für Camping und Caravan für mobile Stromversorgung für Industrie, Schiffahrt, Baugewerbe 20 B Technische Zeichnungen unter

7 Solar modules TX-series 12V State 2014 TX TX TX TX Solar modules TX-series 12V TX - light-weight solar modules with textile frame of high-quality tarpaulin fabric. Foldable, with up to 4 wings. For sprayhood, bimini, wind dress and cover. - Made in Germany. Product charateristics Circumferential soft fabric edge for mounting on textile surfaces / coverings ppropriate Tenax base parts for fastening are enclosed Multi-wing modules are foldable Each wing of a multi-wing module works independently. Waterproof plug and coupler are enclosed, for simple and quick electrical installation 0.4 m connecting cable + 10m cable (3m at TX-11027) are included 100% sea- & saltwater resistant Crystalline cells of highest performance class for maximum power Non-Glass-module with unbreakable Nowoflon foil Light-weight mounting plate, 3mm aluminium sandwich, powder-coated white, fully encased in EV Cable output screwed, sealed and utterly water proof Ultraflat module construction (5mm), at cable output 15mm 100% maintenance-free, self-cleaning surface 3 years warranty on power output

8 TECHNICL FETURES TX-series 12V TX TX TX TX TX TX TX Power* [Wp] I sc [] 1,0 2,2 3,0 4,4 6,0 8,8 12,0 I max [] 0,9 2,0 2,7 4,0 5,5 8,0 11,0 Cell sizes [mm] 52 x x x x x x x 156 Length [mm] Width [mm] No. of Tenax fasteners Weight netto [kg] 1,0 2,2 2,6 4,2 4,6 8,2 8,6 Weight brutto [kg] 1,5 5,4 6,4 7,2 8,8 11,7 14,4 2 Cable (2 x 1,5 mm ) [m] 3,0 0,4+10,0 0,4+10,0 0,4+10,0 0,4+10,0 0,4+10,0 0,4+10,0 No. of wings Valid for all TX-modules: Uoc = 22,8V / laminate: ETFE/EV/ETFE / for 12V-systems / carrier plate 3 mm sandwich, white / cable length 0,4m / serial connection only permitted for 24V systems / individually packed / Environmental conditions: 40 up + 85 C, thermal characteristic values:: TK Isc: -1,1m/K, TK Uoc: -2,3 mv/k, TK Pmpp: mw/k * ccording to STC (standard test conditions), M 1,5, 1000 W/m², 25 C, measuring tolerance: 10%. Technical changes reserved. State 6/2014 TX-Modules TX RNGE OF PPLICTIONS For motor boats and sailing yachts For camping and caravan For mobile current supply TX TX TX TX TX Installation notes TX solar modules are sewn into a textile frame. The soft transition from the rigid module to the textile frame allows the modules to be fastened to taut textile surfaces such as sprayhood, bimini or tarpaulin. The module itself is fastened to textile tops using Tenax fasteners. Matching Tenax base parts for textile surfaces are enclosed with each module. Each wing of a multi-wing module works independently. This reduces power loss in case of partial shading.

9 DIMENSIONS TX-12039/ ,5 C 1 [mm] C 1 [mm] C 2 [mm] TX , TX ,0 251 Technical drawings at 15 C 1 C 2 C 2 C 2 3,0 2,5 2,0 1,5 1,0 0,5 I [] TX TX W/m², 25 C U [V] DIMENSIONS TX-22039/ C 1 [mm] C 1 [mm] C 2 [mm] TX ,5 260 TX ,0 251 Technical drawings at C1 C 2 C 2 C 2 6,0 5,0 4,0 3,0 2,0 1,0 I [] 2 wings aktiv TX TX wing aktiv 1000 W/m², 25 C TX TX U [V]

10 TX-42039/42052 [mm] 1 [mm] 2 [mm] TX TX Technical drawings at DIMENSIONS , , TX ,0 I [] 1000 W/m², 25 C 12,0 I [] 4 wings aktiv 1000 W/m², 25 C TX ,0 10,0 4 wings aktiv 8,0 8,0 3 wings aktiv 3 wings aktiv 6,0 2 wings aktiv 6,0 2 wings aktiv 4,0 4,0 2,0 1 wing aktiv 2,0 1 wing aktiv U [V] U [V]