Kompakt doppelt exzentrische Kugelhähne Compact double offset Ball Valves
|
|
- Helene Weiner
- vor 5 Jahren
- Abrufe
Transkript
1 Kompakt doppelt exzentrische Kugelhähne Compact double offset Ball Valves Kompakt doppelt exzentrisch, 3 teilig, weichdichtend Compact double offset, 3 parts body, soft sealing Type: KGH DN: (8 48 ) PN: (Class ) Temp: 80 C FALKNER Armaturenvertriebs GmbH Tel: +43 (0) A-4320 Perg / Technologiepark 17 Fax: +43 (0) sales@gur-valves.com
2 Anwendungen / Applications Absperrarmaturen in der Wasserwirtschaft und Wasserkraftanlagen insbesondere bei hohen Drücken und Flussgeschwindigkeiten Rohrbrucharmaturen in der Wasserwirtschaft und Wasserkraftanlagen Turbinen-Einlaufarmaturen in Wasserkraftanlagen Entleer- und Grundablassarmaturen usw. Shut-off valves in the water industry and hydro power industry, particularly for higher pressure rates and flaw velocity Pipe-burst valves in the water industry and hydro power industry Turbine inlet valves in the hydro power industry Drain- and free discharge valves etc. Vorteile / Advantages Für hohe Drücke einsetzbar Extrem niedriger Verlustbeiwert (- Wert) Absolut dichter Abschluss in der Hauptdurchflussrichtung Hauptdichtung in Offenstellung außerhalb der Strömung Wartungsfrei, keine schmierstellen Geringer Verschleiß der Hauptdichtung (durch doppelt exzentrisch gelagerte Kugeln) Geeignet zum Aufbau von diversen Antrieben (Standard und Sonderantriebe), auf Wunsch mit allem Zubehör lieferbar For high pressure rates applicable Extreme low head loss coefficient (- coefficient) Absolutely tight seal in the main flow direction Main seal out of flow stream in open position Maintenance free, nu lub points Low-wearing main seal (by double offset balls) Suitable for different actuators (standard and non standard), on request provided with all equipment Druckstufen Abmessungen / Pressure rates dimensions Nennweite / nominal diameter Prüfdruck / test pressure D [mm] Gehäuse / body [bar] Abschluss / seat [bar] , Nenndruck / nominal pressure PN [bar] *) bei Betriebstemperatur bis 50 C / at working temperature up to 50 C Generelle Ausführungsvarianten / General designs Betriebsdruck / working pressure maximal *) [bar] Kompakt / Compact Flanschausführung / Flange style Antriebe / Actuators Freies Wellenende (ohne Antrieb) Getriebe mit Handrad Getriebe mit elektrischem Antrieb Schließgewicht mit Hydraulikzylinder Bare shaft (no actuator) Gear unit with handwheel Gear unit with electric actuator Counterweight with hydraulic cylinder Änderungen vorbehalten / Subject to Alteration Type: KGH 2
3 Systemzeichnung / System drawing Benennung / Description Werkstoffe / Materials Gehäuse / Body Kohlenstoffstahl / Carbon steel (S355J2G3 / ASTM 537 or ASTM A105) Kugel / Ball Kohlenstoffstahl / Carbon steel (GS52; S355J2G3 / ASTM 537 or ASTM A105) Hauptdichtung / Main sealing Elastomer (NBR) / Polyurethan Sitzring / Seat ring Austenitischer Stahl / Austenitic steel ( / AISI 304) Spannring / Clamping ring Austenitischer Stahl / Austenitic steel ( / AISI 304) Welle / Shaft Ferritischer Stahl / Ferritic steel (1.4021V / AISI 403) Dichtungen / Seals Novothan / NBR Lagerbüchse / Bushings Bronze / Bronze (INA / DEVA) Distanzelemente / Distance parts Nichtrostender Stahl; Bronze / Stainless steel; bronze Schrauben in Kontakt mit Wasser / Screws in contact with water Nichtrostender Stahl / Stainless steel (A2) Schrauben in Kontakt mit Luft / Screw in contact with air Stahl verzinkt / Steel zinc coated (8.8) Korrosionsschutz / Coating Zwei-Komponenten Epoxidbeschichtung / Two-pack epoxy-resin coating *) Andere Werkstoffe auf Anfrage / Other materials on request Änderungen vorbehalten / Subject to Alteration Type: KGH 3
4 Kugelhahn mit freiem Wellenende / Ball valve with bare shaft PN 25 Flanschausführung Flange style DN *) FF1 FF2 D a b c l d Kompakt Compact Änderungen vorbehalten / Subject to Alteration Type: KGH 4
5 PN 40 Flanschausführung Flange style DN *) FF1 FF2 D a b c l d Kompakt Compact PN 63 Flanschausführung Flange style DN *) FF1 FF2 D a b c l d Kompakt Compact Änderungen vorbehalten / Subject to Alteration Type: KGH 5
6 Kugelhahn mit Getriebe und Handrad / Ball valve with gear unit and handwheel PN 25 Kompakt Flanschausführung *) Änderungen vorbehalten / Subject to Alteration Type: KGH 6
7 PN 40 Kompakt Flanschausführung PN 63 Flanschausführung Flange style Kompakt Compact Änderungen vorbehalten / Subject to Alteration Type: KGH 7
8 Kugelhahn mit Getriebe und E-Antrieb / Ball valve with gear unit and electric actuator PN 25 Flanschausführung Flange style Kompakt Compact Änderungen vorbehalten / Subject to Alteration Type: KGH 8
9 PN 40 Kompakt Flanschausführung PN 63 Kompakt Flanschausführung Änderungen vorbehalten / Subject to Alteration Type: KGH 9
10 Kugelhahn mit Schließgewicht und Hydraulikzylinder / Ball valve with counterweight and hydraulic cylinder PN 25 DN*) FF1 FF2 D a1 a2 b c f1 f2 t s Rmax Kompakt Flanschanschluss mm mm mm mm Änderungen vorbehalten / Subject to Alteration Type: KGH 10
11 PN 40 DN*) FF1 FF2 D a1 a2 b c f1 f2 t s Rmax Kompakt Flanschanschluss mm mm mm mm **) PN 63 DN*) FF1 FF2 D a1 a2 b c f1 f2 t s Rmax Kompakt Flanschanschluss mm mm mm mm **) **) Änderungen vorbehalten / Subject to Alteration Type: KGH 11
Flansch Absperrklappe schweiß Konstruktion Flanged Butterfly Valve welded design
Absperrklappe schweiß Konstruktion Flanged Butterfly Valve welded design Doppelt exzentrische Absperrklappe Double offset Flanged Butterfly Valve Type: AKF DN: 200 3000 (8 120 ) PN: 6 40 (Class 125 300)
MehrRohrschieber Slide Valve
Rohrschieber Slide Valve Type: RS DN: 50 300 (2 12 ) PN: 6 160 (Class 125 900) Temp: 50 80 C Hydrostatischer Prüfdruck / Hydrostatic test pressure: 160 280 bar Abschluss Sitz / End cover seat: 100 160
MehrTurbineneinlauf-Klappe Turbine Inlet Valve
Turbineneinlauf-Klappe Turbine Inlet Valve Type: AKF T or KDG T DN: 200 2000 (8 80 ) PN: 6 25 (Class 125 150) Temp: 0 C +80 C FALKNER Armaturenvertriebs GmbH Tel: +43 (0)7262 9396-3320 A-4320 Perg / Technologiepark
MehrKipp Rückschlagklappe Tilting Check Valve
Kipp Rückschlagklappe Tilting Check Valve Mit Dämpfung / with damping system Type: 8 RK, 8 RK M, 8 RK E DN: 100 1400 (4 56 ) PN: 10 25 (Class 125 150) Temp: 0 C +80 C FALKNER Armaturenvertriebs GmbH Tel:
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
MehrPos. Item. DN L H H 1 D d 1 d 2 b n x d 3 d 4
Class 150 Class 150 Ausführung Schieber mit aussenliegender Spindel mit elastischem Keil und steigender Spindel mit Flanschanschluss Baulänge nach ANSI B16.10 DN 2 12 Design Gate valve with outside screw
MehrAbsperrklappen Typ BD und BW Butterfly valves type BD and BW PN 2, , DN , Class , Size 2" "
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BD und BW Butterfly valves type BD and BW PN,..., DN 0... 00, Class... 0, Size "... 0" Absperrklappen Typ BD und BW Butterfly valves
MehrKipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN Class 75 / 150, Size 12"... 40"
WASSERARMATUREN Valves for drinking and sewage water Kipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN 00... 1000 Class 75 / 150, Size 12"... 40" Kipp-Rückschlagklappen Typ
MehrGate Valve Absperrschieber
Gate Valve Absperrschieber Cast steel Stahlguß Type GA 100 PN 16 100 DN 50 600 11 14 15 23 13 20 18 22 6 12 16 19 21 2 24.1, 24.2 4 5 7 10 8 9 1 Created / Erstellt Checked / Geprüft Quotation / Angebot
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrBVA 23 1/4-4. Ku, Ball valve with top flange stainless steel, three-piece body.
Ku, Ball valve with top flange stainless steel, three-piece body BVA 23 1/4-4 E-mail: brno@fluidbohemia.cz http://www.fluidbohemia.cz Copyright by InterApp BVA23 0137 Konstruktion: 1 3-teiliges Gehäuse
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BM und BT Butterfly valves type BM and BT PN 10..., DN... 00 Class 75...150, Size 1 ½"... 64" Absperrklappen Typ BM und Typ BT Butterfly
MehrDN PN PSA-BETINA Keil Absperrschieber. Typ GIL ( Type GIL ) PSA-BETINA Wedge Gate Valve
PSA-BETINA Keil Absperrschieber PSA-BETINA Wedge Gate Valve DN 40 500 PN 10 16 - Mit Flanschen nach EN 1092 Teil 2 With flanges acc. EN 1092 part 2 - Baulängen nach EN 558 Teil 1 Reihe 14 oder 15 Face
MehrSpecification. DESIGN Body consists of 2 part, with replaceable seat; Face to face dimension acc.to EN R20.
Technische Daten BAUFORM 2-teilige Körperkonstruktion mit auswechselbarer Manschette. Baulänge nach EN 558-1 Reihe. BETÄTIGUNG Durch Handrad mit Getriebe, elektr. od. pneu. Stellantrieb. ANSCHLUß Flansch
MehrDesign Quadruple eccentric control valve, body made of steel in welded; disc made of cast steel or steel in welded, metal/metalsealing
Ausführung 4-fach exzentrische Regelklappe, Gehäuse aus Stahl geschweißt, Klappenscheibe aus Stahlguss oder Stahl geschweißt, metalldichtend, Klappenscheibe doppeltexzentrisch gelagert, Sitzgeometrie 4-fach
MehrSpecification. DESIGN Swing check valves for return fl ow prevention in piping systems to be mounted directly between fl anges acc. to DIN.
Technische Daten BAUFORM Rückschlagklappen zur Rückfl ussverhinderung in Rohrleitungssystemen für den Einbau zwischen DIN Flanschen. ANSCHLUß Flansch DN32 DN500 bemessen für Flansch nach PN16 BETRIEBSDRUCK
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Schieber, weich dichtend Gate valves, soft seated PN 0... 0, DN 0... 00 Class 7... 00, Size ½"... " Schieber, weich dichtend Typ GTS Gate valves, soft
MehrButterfly Valve Type AK03 / AK04
Butterfly Valve Type AK03 / AK04 description: Butterfly valve to control a liquid or gaseous media in a pipeline system. features: - suitable for neutral and not neutral gaseous & liquid media - Maintenance
Mehrwatergates knife-gate-valves - Stoffschieber
watergates knife-gate-valves - Stoffschieber Technische Daten BAUFORM Keilflachschieber mit Innenspindel, DIN 3352/4A, weichdichtend, wartungsfrei. Für den Einsatz im Nutz- und Abwasserbereich. VORTEILE
MehrSchieber, metallisch dichtend Typ GTW Gate valves, metal seated type GTW PN 2, ; DN Class ; Size 2"...
WASSERARMATUREN Valves for drinking and sewage water Schieber, metallisch dichtend Typ GTW Gate valves, metal seated type GTW,5... 0; 50... Class 75... ; Size "... 5" Schieber, metallisch dichtend Typ
MehrFSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type
FSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type FSKH mit Abschließvorrichtung und Endschalter FSKH with locking device and position switch (F)SKH SAE (F)SKH SAE Größen: 13 bis 50 Gehäuse:
MehrVerzeichnis / Index. Type: KDG DN: (4 80 ) PN: 6 25 (Class ) Temp: -20 C +150 C
Flansch Absperrklappen / Flanged Butterfly Valves Verzeichnis / Index Zweifach exzentrische Flansch Absperrklappen nach DIN / ISO / EN / ANSI Double offset flange Butterfly Valve acc. to DIN / ISO / EN
MehrControl shut-off butterfly valves DN 50 DN 400 PN
Features Applications include HEVAC and drinking water systems, sanitary and industrial plants for control or shut-off of water and steam -10...+110 C Leakage rate: tight sealing Control and shut-off butterfly
MehrWellschlauch mit einer Umflechtung Corrugated hose with one braiding
MW 8 00 TUBOFEX EdelstahlWellschlauch, Parallelwellung Einwandig, mittelwandig, mittlere Wellung TUBOFEX stainless steel hose, parallel corrugations Singlewall, medium wall thickness, standard pitch Ausführung
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrTECHNISCHE DATEN TYP PLU. Einfachwirkende auf Druck arbeitender Hydraulikzylinder, TECHNICAL DATA
TECHNISCHE DATEN TYP PLU Einfachwirkend auf Druck arbeitender Hydraulikzylinder TECHNICAL DATA TYP PLU Single-acting, pressure-operated hydraulic cylinder Einfachwirkende auf Druck arbeitender Hydraulikzylinder,
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrBaureihe 280 / 281 / 282 Type 280 / 281 / 282
1 fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10
MehrGehäuse Stahl verzinkt oder Edelstahl body steel zinc coated or stainless steel
Gasmessventil GV gas measuring valve GV GV (Grundventil basic valve) GV-BE GV-DKO GV-GV Abbildung ggf. abweichend picture may be different Gehäuse verzinkt oder Edelstahl body zinc coated or stainless
MehrKugelhähne. Split Body
Kugelhähne Split Body > Kugelhähne Split Body Zulassungen und Standards API Spec. 607 American Society for Testing and Materials American Society of Mechanical Enginners National Association of Corrosion
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrTechnical details subject to change without notice / Tolerances acc. to DIN/ANSI standards, other dimensions approximate
Check Valve B4w / wafer type Check Valve B4w available sizes DN 50 up to DN 250, PN 10, wafer type execution disc replaceable, with reinforced steel inlet for assembling between flanges acc. to DIN EN
MehrMaterials Standard Alternatives
Diaphragm Valve A1a/w Diaphragm Valve A1a/w Available sizes DN 15 - DN 350, PN 10. Diaphragm valve without stuffing box. Spindle enclosed, entirely protected against medium, non rising handwheel. Flanges
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
Handbetätigt allseitig mit Innengewinde mit T- oder L- Bohrung hand actuated all ports female thread with T- or L- configuration Bauart Nennweite DN 10 50 Betriebsdruck Handhebel Gehäusewerkstoff Kugelwerkstoff
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrMaterials Standard Alternatives. Body: GGG 40 GG25, GGG40.3,
Butterfly Valve centric K1 / K6 Butterfly Valve K1, lug type, centric execution Available sizes DN 40 DN 1000, seatring reinforced and replaceable lug type execution with threaded holes for mounting between
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrAbsperrarmaturen. Absperrarmaturen. Shut off valves.
Absperrarmaturen Shut off valves 111 Produktübersicht Product overview Nr. 1100 Nr. MSKH Seite / page 114 Seite / page 115 Nr. MSKH - IxA Nr. FEK1 Seite / page 115 Seite / page 116 Nr. FEK2 Nr. ZFK Seite
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrPN Absperrklappe 3-fach exzentrisch Valco Opal. Butterfly valve triple eccentric Valco Opal EKA
Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleichoder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreiboder Übersetzungsfehler übernehmen wir keine Haftung.
MehrTECHNISCHE DATEN TYP D TECHNICAL DATA
TECHNISCHE DATEN TYP D Hydraulik Differentialzylinder ohne Endlagendämpfung TECHNICAL DATA TYP D Hydraulic differential cylinder without end position damping Hydraulik Differentialzylinder ohne Endlagendämpfung,
MehrRückschlagklappe mit Dämpfung Swing Check Valve with damping system
Rückschlagklappe mit Dämpfung Swing Check Valve with damping system 8 RA weich dichtend / soft sealing 8 RB metallisch dichtend / metal sealing Type: 8 RA, 8RB EN 558 1 Reihe / column 48 (DIN 3202 / F6)
MehrPISTER. SAE-FlanschKUGELHÄHNE. FlangedBALL VALVES SAE. Kugelhähne
SAE-Flansch-KUGELHÄHNE Flanged BALL VALVES SAE PISTER Kugelhähne SAE-FlanschKUGELHÄHNE Serie 540 DN 13-25 Serie 550 DN 13-50 Serie 330 DN 65-100 3000 psi und 6000 psi Gehäuse, Flanschen, Kugel und Schaltwelle
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrPSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve
PSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve Typ (Type) GSAL DN 40 500 PN 10 250 mit Flanschen oder Anschweißenden DN 40 500 PN 10 250 with flanges or welding ends - Ausführung
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehr3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrTECHNISCHE DATEN TYP HET TECHNICAL DATA. Single-acting hydraulic telescopic cylinder
TECHNISCHE DATEN TYP HET Hydraulisch einfachwirkender Teleskopzylinder TECHNICAL DATA TYP HET Single-acting hydraulic telescopic cylinder, bis zu 5 Stufen, Nenndruck max. 200 bar. Sonderausführung nach
MehrKugelhähne Ball-valves
163 Ball-valves Features u u unterschiedliche Baureihen für flexible Anwendungen Mini- auch mit Steckanschluss u u Various lines for flexible applications Mini ball valves also with plug connection 164
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
MehrSpecification. OPERATION Rotation of the handle through 90, with snap-in positions.
Technische Daten BAUFORM 1-teiliges Zentriergehäuse zum Einklemmen zwischen zwei Flansche nach EN 92-1 Typ 11 Form B (PN/PN1). Mit DVGW- Zulassung für Trinkwasser. BETÄTIGUNG 90 -Drehung des Handhebels,
MehrPneumatische Stellantriebe, Typen GTK, GTW, GTX. pneumatic actuators type GTK, GTW, GTX ATTUATORI EUROPE PNEUMATIC ACTUATORS AND ACCESSORIES
ATTUATORI EUROPE PNEUMATIC ACTUATORS AND ACCESSORIES Pneumatische Stellantriebe, Typen GTK, GTW, GTX pneumatic actuators type GTK, GTW, GTX CE, ATEX, GOST, SIL3 ATTUATORI EUROPE PNEUMATIC ACTUATORS AND
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
MehrSpecification. FACE TO FACE LENGTH Acc. to EN R20.
Technische Daten BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10/PN16); andere auf Anfrage. BAULÄNGE Nach EN
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrBaureihe 280 / 281 / 282 Type 280 / 281 / /2-Wege Coaxialventil 2/2-way coaxial valve. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrTyp ZRK, ZRKF. Übersicht / Overview. Baureihe Type. Ausführung Design
Übersicht / Overview Baureihe Type Ausführung Design GGG40-ST Gehäuse: GGG40, verzinkt Klappe: Stahl 1.0619, verzinkt Body: GGG40, zinc plated Steel A216 (WCB), zinc plated ST-ST Gehäuse: Stahl 1.0619,
MehrWerkstoffe Materials Spindel, Spindelmutter und Stopfbuchsschrauben Stem, stem nut and stuffing box screws
Nr..1 SäureAbsperrschieber nach DIN 52 mit Flanschanschluss, mit Bügelaufsatz, steigender Spindel, außenliegendem Spindelgewinde und nicht steigendem Handrad. Baulänge nach DIN EN 551 Grundreihe (), Grundreihe
MehrAbsperrschieber Gate valves. Nr Absperrschieber nach DIN Gate valves acc. to DIN 3352
nach DIN 3352 mit Flanschanschluss PN, mit Bügelhaube, steigender Spindel, außenliegendem Spindelgewinde, nichtsteigendem Handrad und kugelgelagerter Bundbuchse. Baulänge nach DIN EN 5581 Grundreihe 15
MehrGate valves Nr
SäureAbsperrschieber nach DIN 52 mit Flanschanschluss 6, mit Bügelaufsatz, steigender Spindel, außenliegendem Spindelgewinde und nicht steigendem Handrad. Baulänge nach DIN EN 5581 Grundreihe 1 (), Grundreihe
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrRückschlagklappen Kunststoff Swing check valves plastic
Übersicht / Overview Baureihe Type Ausführung Design Gehäuse: PVC-U Klappe: Feder: PVC-U Edelstahl.7, Hastelloy C (.0) Dichtungen:NBR, EPDM, FPM (Viton) oder PTFE Druckbereich: 0 bis bar Body: Disc: Spring:
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
MehrFlansch-Hebel-Sicherheitsventile
Flansch-Hebel-Sicherheitsventile Flanged Safety Valves with Lever and Weight Inhalt Contents Type Seite/Page Normal-Sicherheitsventil Safety Relief Valve mit Hebel und Gewicht bis PN 40 with Lever and
Mehr42 QUALITY SINCE Ball Valves KUGELHÄHNE
594 High-Temperature-Ball Valve DIN-DVGW for Gas and Potable Water Hochtemperatur-Kugelhahn DIN-DVGW für Gas und Trinkwasser ROSTECHNADZOR (GGTN) 1 Cu Zn 40 Pb 2 - DIN EN 12165 2 3/8-1 Cu Zn 39 Pb 3 -
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrPIPE CLASS 025Y01 CAC PAGE 30 P I P I N G E N G I N E E R I N G CHEMNITZ PRINTDATE
COMPKEYNO 18323241 VAR. LL03 NO. A 324 17.04.2013 30 IDENT NO. : A 324 - PN 25 : BUTTERFLY VALVE FOR FLANGE JOINT ACC.TO EN 1092-1 FACING TYPE B1 : DIN EN 593 AND MANUFACTURERS : LUG TYPE WITH THREADED
MehrBronze BR - B 584 Spring: Stainless steel / AISI 316 Valve disc: Stainless steel / AISI 316 L
Technische Daten BAUFORM -teilige Körperkonstruktion, Zwischenflanschbauweise mit breiter Dichtfl äche nach DIN. ANSCHLUß DN 5 bis DN EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten
MehrKEGEL-RÜCKSCHLAGVENTILE NON-RETURN-VALVES
28/07/5 TECH DATA SHEET 069 KEGEL- Gehäuse Valve Body Kegel Cone Dichtscheibe - Viton Sealing Ring Deckscheibe Plain Washer Druckfeder Compression Spring 8 Führung Valve Guide Kopf Valve Head Wichtige
MehrFlow through sight glasses Nr. 440/450
Flow through sight glasses Nr. 4/450 Durchfluss-Schaugläser in Eckform (Nr. 4) und Dreiwegeform (Nr. 450) mit Flanschanschluss bis Gehäuse in Schweißkonstruktion mit Einlaufstutzen, beiderseits Schauglasplatten
MehrPIPING POWER. Flanschkugelhahn KS/0 Flanged ball valve KS/0 5/7 KS/0 DN:; DN;= KS/0 DN0; DN5== KS/0 DN5:; DN:==
KS/0 DN:; DN;= KS/0 DN0; DN5== KS/0 DN5:; DN:== Abbildung ggf. abweichend picture may be different 5/7 KS/0.5 Standardausführung KS/0.5 standard design Material material Gehäuse Kugelgraphitguss GJS-344
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrTECHNICAL DATA. Double-acting pneumatic telescopic cylinder
TECHNISCHE DATEN TYP PDT Pneumatisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP PDT Double-acting pneumatic telescopic cylinder Pneumatisch doppeltwirkende Teleskopzylinder mit Endlagendämpfung,
MehrSchlauchschellen, Gelenkbolzenschellen, Spannbackenschellen, Befestigungsschellen, Klemmschalen
Schlauchschellen, Gelenkbolzenschellen, Spannbackenschellen, Befestigungsschellen, Klemmschalen Hose clamps, Heavy duty clamps, Double bolt super clamps, pipe retaining clips, Safety clamps 45 Produktübersicht
MehrKUGELHAHN aus Stahl mit Anschweissende / Flansch TYP 320 und 325
KUGELHAHN mit Anschweissende / Flansch TYP 320 und 325 C o N T o R L Beschreibung Edition 11-10-2010 Der Kugelhahn vom Typ KST 320 ist ein dicht schließender Kugelhahn für Rohrleitungssysteme mit flüssigen
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BM und BT Butterfly valves type BM and BT PN 0..., DN... 00 Class...0, Size ½"... " Absperrklappen Typ BM und Typ BT Butterfly valves
MehrVAG-Rückstauklappe PN 1,0
VAG-Rückstauklappe PN 1,0 Kreisform mit Flanschanschluss, mit Steinschrauben, mit Schwimmerhohldeckel, mit einfachem eckel, mit Hebel und Gegengewicht VAG Flap Valve PN 1,0 Circular Shape with flange connection,
MehrDESIGN 1-piece designed wafer-type ball valve, full bore, mounting pad for actuator according to ISO 5211, Anti Static Device. TA Luft approval.
Technische Daten BAUFORM 1-teilige kompakte Körperkonstruktion, voller Durchgang, Flanschplatte für Antriebsaufbau nach ISO 5211, Anti Statik Ausführung. TA-Luft Abnahme BESONDERHEITEN kleines Einbaumaß
MehrDIN EN form A 230V 50Hz, 24V DC, special voltages voltage tolerance + / - 10% acc. VDE 0580 power consumption 230V 50Hz: 6,5VA 24V DC: 5W
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 15 50
MehrStahlharte Präzision. Dreifach / vierfach exzentrische Regelklappe Triple / quadruple offset control valve. Rubin VALCO
Stahlharte Präzision Dreifach / vierfach exzentrische Regelklappe Triple / quadruple offset control valve VALCO Rubin 6 Für höchste Genauigkeit For the highest level of accuracy VALCO Rubin Dreifach /
MehrPRIRUBNICE FLANSCHE FLANGES EN bar
LEPTIRASTI ZATVARAČ S DVA EKSCENTRA - ZAVARENA IZVEDBA ABSPERRKLAPPE MIT DOPPEL EXZENTER - STAHLGESCHWEISSTE AUSFÜHRUNG DOUBLE ECCENTRIC BUTTERFLY VALVE - WELDED DESIGN Art Nº NAZIVNI PROMJER NENNWEITE
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrProduktinformation Product information
Produktinformation Product information Einsatzgebiete Eintragsystem in pneumatische Förderanlagen. Ein- und Ausschleussystem in Prozessanlagen bis zu einem Differenzdruck von 4 bar (g). Geeignet für pulver-
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrSKH - Schmiedestahl Kugelhähne Forged ball valves
SKH - Schmiedestahl Kugelhähne Forged ball valves ASKH mit Anschweißenden, Rundgehäuse und Deckel ASKH with welding ends, round body and cover Größen: DN04 bis DN50 Gehäuse: Automatenstahl, Vergütungsstahl,
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
Mehr