3 x USB 2.0 <=> 2 x RS422/ x RS232 High Isolated Industrie Konverter Board PC104 (Prod. Nr. #253)

Transkript

1 3 x USB 2.0 <=> 2 x RS422/ x RS232 High Isolated Industrie Konverter Board PC104 (Prod. Nr. #253) Merkmale: Extrem EMV unempfindlich! Extrem robust! Für Industrie designt! Bis 2 x 12 Mbps schnell! 9 Pull Down/Up- & Abschluss- Widerstände zuschaltbar - für jede Anwendung passend! Außenabmessungen (mm) L 112 B 91 H 18 Chip FT2232! Voll- oder Halb- Duplex ( 4-2- Leiter ) mit vollisolierter 4 x RS422/ x RS232 COM-Schnittstelle! Geringe Stromverbrauch! High-Speed Digital Isolator (keine Optokoppler)! +/-60 ma Driver Output, EIA 422-B, EIA 485-A, ITU V11, Profibus, UL 1577, IEC Thermal Shutdown bei falscher Beschaltung oder Busfehler! RS422 Receiver: +/- 15 kv Human Body Model +/- 6 kv IEC , Contact Discharge +/- 12 kv IEC , Air-Gap Discharge Allow Up to 128 Receivers on the Bus True-Fail-Safe Receiver Thermal Protection Against Output Short Circuit RS422 Driver: +/- 9 kv Human Body Model Slev-Rate Limited for Errorless Data Transmission Current Limiting Thermal Shutdown for Driver-Overload Protection RS232 V.24: Feature MegaBaud operation Guaranteeing 1Mbps for highspeed applications Guaranteed Data Rate 1 Mbps Guaranteed Slew Rate 24V/µs Meets EIA/TIA-232 Specifications Down to 3.0V Ready-to-Transmit Logic-Level Output ±15 kv ESD Protection USB2.0 ESD Schutz: 2 data lines protection, Protects VBUS Enhanced ESD protection: IEC level 4: 15kV (air discharge) 8kV (contact discharge) ESD protection of VBUS Fast response time Consistant D+/D- signal balance Best capacitance matching tolerance I/O to GND of 0.04pF Compliance with USB2.0 requirement (<1pF) Galvanischer Trennung: High common-mode transient immunity: >25 kv/µs Safety and regulatory approvals UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC : 600 V rms (reinforced) IEC : 250 V rms (reinforced) VDE certificate of conformity DIN V VDE V (VDE V ): VIORM = 846 V peak USB2.0 The FT2232H is FTDI s 5th generation of USB devices. The FT2232H is a USB 2.0 High Speed (480Mb/s). RS422/RS485 UART Transfer Data Rate up to 12 Mbaud RS232 UART Transfer Data Rate up to 1 Mbaud (V.24 Signal limitation) Referenzen: auf Anfrage Test bei 1 MBaud ergab (alte FTDI Chip in eckigen Klammer): :30:10: Did requests :30:10: Min request: 1,00 [~2 ms] :30:10: Max request (15 ms): 4,00 [~12ms] :30:10: Avg request (7 ms): 2,21 [~5ms] :30:10: Stats: :30:10: Retries send/receive: 0/0

2 Blockschaltbild Konverter Bilder Technische Daten: 3 x USB 2.0 <=> 2 x RS422/ x RS232 High Isolated Industrie Konverter Board PC104 Produkt: Außenabmessungen: Driver: Installation: USB-Interface: 3 x USB 2.0 <=> 2 x RS422/ x RS232 High Isolated Industrie Konverter Board PC104 L 112 B 91 H 18 in mm Befestigung in PC104 Raster, Bohrungen 4 x 3,7 mm Driver Installation Anleitung - kurz Driver Installation Anleitung - lang Plug & Play 6 x virtueller COM-Port Anschluss 1,2,3: USB2.0 (1.1) Anschluss 1,2,3 USB SIL 1x5 RM2,54mm #253

3 Belegung: Anschluss 1,2,3 ESD Schutz: Pin 1 - Vcc - RT Pin 2 - Data- - WS Pin 3 - Data+ - GN Pin 4 - GND - SW Pin 5 - GND - Schirm 2 data lines protection, Protects VBUS Enhanced ESD protection: IEC level 4: 15kV (air discharge) 8kV (contact discharge) ESD protection of VBUS Fast response time Consistant D+/D- signal balance Best capacitance matching tolerance I/O to GND of 0.04pF Compliance with USB2.0 requirement (<1pF) Anschluss RS422/485: über SIL 1x5 RM2,54mm Anschluss 2 x 422/485 Belegung Port A (Port 1) Pin 1 - TX- (Z) output Pin 2 - TX+ (Y) output Pin 3 - RX+ (A) input Pin 4 - RX- (B) input Pin 5 - GND Port B (Port 2) Pin 6 - TX- (Z) output Pin 7 - TX+ (Y) output Pin 8 - RX+ (A) input Pin 9 - RX- (B) input Pin 5 - GND Abschlusswiderstände: 8 Stück - schaltbar über DIL Schalter Feste Pull Up/Down Widerstände RX+ Pull Up 100K RX- Pull Down 100K TX+ Pull Up 100K TX- Pull Down 100K Bei Bedarf können folgende Abschlusswiderstände geschaltet werden: 120R und / oder 390R

4 Lokales Echo: Anschluss RS422/485 Schutz: Handshake über: TX/RX Umschaltung: Übertragungskanäle: Anschluss RS232: Anschluss RS232 Belegung: Anschluss RS232: Bei Halbduplex - abschaltbar über DIL Schalter Port A (Port 1) DIL-5 ON Port B (Port 2) DIL-10 ON RS422 Receiver: +/- 15 kv Human Body Model +/- 6 kv IEC , Contact Discharge +/- 12 kv IEC , Air-Gap Discharge Allow Up to 128 Receivers on the Bus True-Fail-Safe Receiver Thermal Protection Against Output Short Circuit RS422 Driver: +/- 9 kv Human Body Model Slev-Rate Limited for Errorless Data Transmission Current Limiting Thermal Shutdown for Driver-Overload Protection kein X-On / X-Off Automatisch oder über Handshake RS422 fullduplex 4-Leiter RS422 halfduplex 2-Leiter SIL 1x5 RM2,54mm Pin 1 - TXD Output Pin 2 - RXD Input Pin 3 - nc Pin 4 - nc Pin 5 - GND RS232 V.24: Feature MegaBaud operation Guaranteeing 1Mbps for highspeed applications Guaranteed Data Rate 1 Mbps

5 Galvanischer Trennung: Guaranteed Slew Rate 24V/µs Meets EIA/TIA-232 Specifications Down to 3.0V Ready-to-Transmit Logic-Level Output ±15 kv ESD Protection High common-mode transient immunity: >25 kv/µs Safety and regulatory approvals UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC : 600 V rms (reinforced) IEC : 250 V rms (reinforced) VDE certificate of conformity DIN V VDE V (VDE V ): VIORM = 846 V peak Spannungsversorgung: +5V über USB ca. 280 ma pro USB Anschluss Übertragungsraten: Zustandsanzeigen: Betriebstemperatur: 183 bps bis 12 Mbps - RS232 auf 1 Mbps limitiert von V.24 Driver je Port 2x LED grün C Treiber Software: Windows 7 Windows Vista x64 Windows XP x64 Windows Server 2003 x64 Windows Vista Windows XP Windows Server 2003 Windows 2000 Windows ME Windows 98 Linux Mac OS X Mac OS 9 Mac OS 8 Windows CE.NET (Version 4.2 and greater). 4N-GALAXY - Bornheide Hamburg - Germany T F 9081 Mo-Fr 8:00-17:00 copyright N-GALAXY.DE - last update

6

7