CNC Kompetenzzenter mit der multimedialen Software

Transkript

1 CNC Kompetenzzenter mit der multimedialen Software LLP-LdV-TOI-2009-EE-001 1

2 Projektinformationen Titel: Projektnummer: Projekttyp: Jahr: 2009 Status: Land: Marketing Text: CNC Kompetenzzenter mit der multimedialen Software LLP-LdV-TOI-2009-EE-001 Innovationstransfer laufend EE-Estland Das Produkt SYMplus stellt eine Symbiose der Software und des Steuerungssystems eines Simulators dar. Der Lernvorgang findet in einer virtuellen Umgebung start. Es ist möglich, den Prozess vom Arbeitsplatz aus am Bildschirm zu kontrollieren und zu korrigieren. Die Software trägt bestimmt einer Erhöhung von Qualität des Lernvorgangs bei. Die TTK erhielte im Rahmen des Projekts das Recht, die Arbeitshefte anzuwenden und zu verteilen. Zusammenfassung: : Themen: Sektoren: Produkt Typen: Produktinformation: Projektwebseite: The main purpose of the project was to enhance the quality of vocational engineering education through the use of innovative learning tools. During the course of the 2-year project, SYMplus 5.2 software was developed and translated into Estonian, TTK University of Applied Sciences acquired its licence and the software is now used in learning process. Workbooks, CNCplus DREHEN (Turning) and CNCplus FRÄSEN (Milling) in Estonian were published, 2 multilingual dictionaries (Estonian and Lithuanian) of CNC-terms were published and all the publications are used in learning process. The Competence Centre with its 13 virtual workplaces was opened for students and in-service trainees in September Information awailable in english *** Nutzung und Verbreitung von Ergebnissen *** Arbeitsmarkt *** Qualität *** Lebenslanges Lernen *** Hochschulbildung *** Berufsorientierung und -beratung *** Unternehmen, KMU *** Sprachausbildung ** Fernlehre ** Weiterbildung * Anerkennung, Transparenz, Zertifizierung * Erstausbildung *** Verarbeitendes Gewerbe/Herstellung von Waren *** Erbringung von Freiberuflichen, Wissenschaftlichen und Technischen Dienstleistungen *** Erziehung und Unterricht * Baugewerbe/Bau Fernlehre Lehrmaterial Homepage Unterlagen für offenen Unterricht Verbreitungsmethoden CD-ROM The end-products of the project are the following: CNC Competence Centre at TTK with SYMplus software in Estonian for 13 virtual workplaces; workbooks Turning and Milling in Estonian, explaining the use of software and containing numerous practical excercises; multilingual CNC-terminology glossaries (in Estonian and in Lithuanian) helping to understand CNC terms and facilitate learning process. 2

3 Vertragnehmer Name: Stadt: Land/Region: Land: Organisationstyp: Tallinna Tehnikakõrgkool University of Applied Sciences Tallinn Eesti EE-Estland Universität/Fachhochschule/Akademie Kontaktperson Name: Adresse: Stadt: Land: Telefon: Fax: Marek Pakkin Pärnu Street 62 Tallinn EE-Estland

4 Koordinator Name: Stadt: Land/Region: Land: Organisationstyp: Tallinna Tehnikakõrgkool University of Applied Sciences Tallinn Eesti EE-Estland Universität/Fachhochschule/Akademie Kontaktperson Name: Adresse: Stadt: Land: Telefon: Fax: Marek Pakkin Pärnu Street 62 Tallinn EE-Estland

5 Partner Partner 1 Name: Stadt: Land/Region: Land: Organisationstyp: R. & S. KELLER GmbH Wuppertal Nordrhein-Westfalen DE-Deutschland KMU - Klein- und Mittelunternehmen (bis zu 250 Mitarbeiter) Partner 2 Name: Stadt: Land/Region: Land: Organisationstyp: Vilnius College of Technologies and Design Vilnius Lietuva LT-Litauen Universität/Fachhochschule/Akademie Partner 3 Name: Stadt: Land/Region: Land: Organisationstyp: Tallinn Industrial Education Centre Tallinn Eesti EE-Estland Weiterbildungseinrichtung 5

6 Projektdateien Agenda meeting_4_tll_ee_iv Transnational meeting.doc MEETING_1_TALLINN_Hedi_3.ppt Powerpoint presentation of the first meeting in Tallinn, Estonia Meeting1Unterschr.pdf Participants of the 1st transnational meeting in Tallinn, Estonia MEETING_2_4-WUPPERTAL_2010.ppt Powerpoint presentation for the second transnational meeting in Wuppertal Minutes_ meeting1_en.doc Minutes of the 1st Transnational Meeting in Tallinn, Estonia Tagesordnung.doc Agenda of the second transnational meeting Verbreitung_2[1] (1).doc Dissemination plan 6

7 Produkte Workbook Milling Workbook Turning CD-ROM software SYMplus 5.2 CNC- glossary (in 4 languages) 7

8 Produkt 'Workbook Milling' Titel: Workbook Milling Produkttyp: Lehrmaterial Marketing Text: Workbook on SYMPlus 5.2 milling software in Estonian. : Workbook with practical exercises on using SYMPlus 5.2 software for making details of milling benches. : students and training groups Resultat: A 100-page illustrated workbook with detailed explanations of using SYMPlus 5.2 software for milling. Number of copies: 100 Anwendungsbereich: Production engineering students and in-service trainees from production engineering industry Produktsprachen: Estnisch &prd=1 8

9 Produkt 'Workbook Turning' Titel: Workbook Turning Produkttyp: Lehrmaterial Marketing Text: Workbook on SYMPlus turning software. : Workbook on SYMPlus turning software in Estonian for making details on turning benches. : Students and training groups Resultat: 100-page illustrated workbook with detailed explanations on the use of SYMPlus 5.2 turning software. Number of copies: 100 Anwendungsbereich: Students of production engineering, in-service trainees from production engineering industry Produktsprachen: Estnisch &prd=2 9

10 Produkt 'CD-ROM software SYMplus 5.2' Titel: CD-ROM software SYMplus 5.2 Produkttyp: CD-ROM Marketing Text: TTK University of Applied Sciences had acquired the software licence and 13 user keys for SYMPlys milling and turning software from project partner Keller for the use at CNC Competence Centre. : Software SYMPlus 5.2 for milling and turning is used for practicing production engineering processes at CNC benches. : students and training groups Resultat: Software created in Germany was translated into Estonian and is now used in the learning process of Estonian students. Anwendungsbereich: Students of production engineering, in-service trainees from production engineering industry Produktsprachen: Estnisch &prd=3 10

11 Produkt 'CNC- glossary (in 4 languages)' Titel: CNC- glossary (in 4 languages) Produkttyp: Lehrmaterial Marketing Text: Multilingual dictionary of CNC-terms helps to facilitate the learning process and enhance language skills. : Project partners TTK and TTHK composed a dictionary of Estonian-Russian-German-English terms, Lithuanian partner VDTK, composed a dictionary of Lithuanian-Russian-English- German terms. : students, training groups, teachers, engineers, operators of CNC machines. Resultat: 2 multilingual dictionaries (one based on Estonian, the other on Lithuanian). Anwendungsbereich: Students and teachers of production engineering, employees, professionals, translators. Produktsprachen: Estnisch Deutsch Russisch Englisch Litauisch &prd=4 11

12 Veranstaltungen Introduction of project results for vocational teachers at TTHK Datum Introducing the possibilities of CNC Competence Centre, SYMPlus software and workbooks for vocational teachers. Vocational education teachers e Veranstaltung , Tallinn, Estonia Introduction of project results at Võru County Vocational Training Centre Datum Introducing project results and possibilities of CNC Competence centre for vocational education teachers in Southern Estonia. Vocational teachers e Veranstaltung , Võru, Estonia Introduction of SYMPlus and workbooks for Estonian Maritime Academy Datum Presentation and introduction of SYMPlus software possibilities and the published workbooks for the Estonian Maritime Academy. management of engineering studies at university of applied sciences level Geschlossene Veranstaltung , Tallinn, Estonia 12

13 Veranstaltungen The Fourth Transnational Meeting Datum Meeting of project partners at Tallinn Industrial Education Centre and at TTK University of Applied Sciences. Project partners e Veranstaltung , Tallinn, Estonia Introduction of project results and CNC Competence Centre for vocational education teachers Datum Seminar for introducing CNC Competence Centre for teachers of vocational schools teachers of vocational establishments e Veranstaltung , Tallinn, Estonia Dissemination seminar for teachers and students of engineering at VDTK Datum Seminar on SYMPlus software and workbooks for lecturers and students at Vilnius College of Technologies and Design lecturers and students of production engineering e Veranstaltung , Vilnius, Lithuania 13

14 Veranstaltungen The third Transnational Meeting Datum Meeting of project partners teachers and students of production engineering in Vilnius, at Vilnius College of Technologies and Design. Students and teachers of production engineering e Veranstaltung , Vilnius, Lithuania Seminar for teachers of vocational education Datum Seminar for introducing project results for vocational education workers Teachers of vocational education e Veranstaltung , TTK, Tallinn, Estonia The Second Transnational Meeting Datum Partners Geschlossene Veranstaltung , Wuppertal, Germany 14

15 Veranstaltungen Open day at TTK Datum Presenting the SYMplus software to the potential students and teachers. potential new students and teachers Geschlossene Veranstaltung Presentation of the project to the management and supporting staff of TTK Datum Presentation of the project. Introduction of the partners and future plans. management and supporting staff Geschlossene Veranstaltung TTK, Tallinn, Estonia The First Transnational meeting Datum Presentation of the coordinator and the partners; setting final goals and timetables. Distributing the work assignments and responsibility. Project and financial coordination. Partners Geschlossene Veranstaltung

16 Project Tags The project belongs to the following group(s): Best Projects ( 12