RPC- TNC. Rosenberger RPC- TNC connectors are conform to the following specification: Radio- frequency connectors, specified in IEC , grade 0
|
|
|
- Hede Giese
- vor 5 Jahren
- Abrufe
Transkript
1 2
2
3 Series RPC- TNC 1Series RPC-TNC TNC Rosenberger RPC- TNC connectors are 50 Ω precision TNC connectors, designed for a frequency range up to 18 GHz, with threaded coupling. The result of the threaded coupling is a higher protection level. Dimensions are based on BNC connector series interface. Series RPC- TNC RPC- TNC Rosenberger RPC- TNC- Steckverbinder sind 50- Ω- Präzisionsausführungen vom Typ TNC, entwickelt für messtechnische Anwendungen bis 18 GHz, mit Schraubverbindung für zuverlässiges Schließen bzw. Öffnen. Durch die gewählte Festhaltungsart wird ein höherer Schutzgrad erzielt. Die Abmessungen entsprechen dem Interface der Serie BNC. Rosenberger RPC- TNC connectors are conform to the following specification: Radio- frequency connectors, specified in IEC , grade 0 Rosenberger RPC- TNC- Steckverbinder erfüllen die Norm: HF- Steckverbinder nach IEC , Grade 0 2 Rosenberger RPC- TNC connectors are mechanically compatible (mateable) with all standard TNC connectors conforming to MIL- C e.g. with the Rosenberger 50 Ω (series 56) and 75 Ω (series 76) TNC series. RPC- TNC connectors have been designed for semi rigid cables and high performance flexible microwave cable assemblies and microwave components. Also available are adaptors to other relevant coaxial connector series and accessories for precision microwave measurement, e.g. components for calibration kits. Rosenberger RPC- TNC- Steckverbinder können mit allen entsprechenden Ausführungen des Typs TNC nach MIL- C gekoppelt werden, so z.b. mit den Rosenberger- Standard- Typen TNC 50 Ω (Serie 56) und TNC 75 Ω (Serie 76). RPC- TNC- Steckverbinder wurden für halbstarre oder flexible Mikrowellenkabel sowie für Mikrowellen- Gehäuseanwendungen entwickelt. Es existieren Übergangssteckverbinder zu allen relevanten koaxialen Steckverbinder- Serien sowie Messzubehör für präzise Messungen im Mikrowellenbereich, z.b. Kalibrier Kit- Elemente. 41
4 Series RPC- TNC Interface Dimensions InterfaceDimensions Dimensions Anschlussmaße D REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D RPC-TNC MALE STECKER FEMALE KUPPLER min. max. min. max. A B C A E C B F F B C E A D E F /16-28UNEF-2B /16-28UNEF-2A MALE STECKER FEMALE KUPPLER 42
5 Technology Technology Technical Data Applicable standards Interface according to IEC Interface gemäß Series RPC- TNC Technische Daten Anwendbare Standards Electrical data Elektrische Daten Impedance 50 Ω Wellenwiderstand Frequency range DC to 18 GHz Frequenzbereich Return loss (connector head) 23 db, DC to 18 GHz Rückflußdämpfung (Steckerkopf) Insertion loss (connector head) 0.05 db x f[ghz] Dämpfung (Steckerkopf) Insulation resistance 5 GΩ Isolationswiderstand Center contact resistance 1.5 mω Übergangswiderstand Innenleiter Outer contact resistance 1.0 mω Übergangswiderstand Außenleiter Test voltage 1500 V rms Prüfspannung Working voltage 500 V rms Betriebsspannung RF- leakage 90 db up to 1 GHz Schirmdämpfung 2 Mechanical data Mechanische Daten Mating cycles 500 Steckzyklen Center contact captivation 27 N Innenleiter Haltekraft Coupling torque recommended 0.46 Nm to 0.69 Nm Anzugsdrehmoment empfohlen Coupling test torque 1.70 Nm Prüfdrehmoment Enviromental data Temperature range - 40 C to +85 C Temperaturbereich Thermal shock MIL- STD 202, Method 107, Condition B Temperaturzyklen Corrosion resistance MIL- STD 202, Method 101, Condition B Korrosionsbeständigkeit Vibration MIL- STD 202, Method 204, Condition D Vibration Shock MIL- STD 202, Method 213, Condition I Schock Moisture resistance MIL- STD 202, Method 106 Feuchtigkeitsbeständigkeit Max. soldering temperature IEC , +260 C for 10 sec. Maximale Löttemperatur Umweltdaten Materials Center contact Beryllium copper, gold- plated Innenleiter Outer contact Stainless steel, passivated Außenleiter Dielectric 1 PTFE Dielektrikum 1 Dielectric 2 PPE Dielektrikum 2 Gasket Neoprene E50 Dichtung Materialien Rosenberger- connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. Rosenberger- Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und - ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger- Ansprechpartner. 43
6 Series RPC- TNC Connector Heads Heads Connector Heads Straight Plug xordering Number Remarks Return Loss x06 S S3 with bead 23 DC to 18 GHz x06 S S3 with bead, coupling nut without wire- lock 23 DC to 18 GHz Stecker gerade Steckverbinderköpfe 30.3 Straight Jack xordering Number Remarks Return Loss x06 K S3 with bead 23 DC to 18 GHz Kuppler gerade
7 Adaptors Series RPC- TNC Adaptors Adaptor (In Series) xordering Number Version Remarks Return Loss x06 S 121-S20 S3 straight RPC-TNC male - male, 20 4 to 18 GHz Adapter (In- Serie) 65.1 Adapter SW10 2 x06 S 121-K20 S3 straight RPC-TNC male - female, 20 4 to 18 GHz 66.4 SW10 x06 K 121- K20 S3 straight RPC-TNC female - female, 20 4 to 18 GHz 67.8 SW10 Adaptor (Inter Series) Adapter (serienübergreifend) xordering Number Version Remarks Return Loss x06 S 132- S00 S3 straight RPC- TNC male - SMA male 19 DC to 18 GHz 45.9 SW8 x06 S 132- K00 S3 straight RPC- TNC male - SMA female 19 DC to 18 GHz 45.4 SW13 x06 K 132- S00 S3 straight RPC- TNC female - SMA male 19 DC to 18 GHz 47.3 SW8 x06 K 132- K00 S3 straight RPC- TNC female - SMA female 19 DC to 18 GHz 45.4 SW13 x06 S 107-P20 S3 straight RPC-TNC male - RPC- 7, 20 4 to 18 GHz 43 ø22 SW13 SW19 x06 K 107- P20 S3 straight RPC-TNC female - RPC-7, 20 4 to 18 GHz 53 ø22 SW13 SW19 45
8 Series RPC- TNC Adaptors xordering Number Version Remarks Return Loss x03 K 706- S23 S3 straight RPC female - RPC-TNC male, 2-hole flange, floating test adaptor 35 DC to 2.5 GHz GHz to 6 GHz 20 6 GHz to 16 GHz GHz to 18 GHz ø ø32 ø3.2 x05 S 106- S00 S3 straight RPC- N 50 Ω male - RPC-TNC male 20 DC to 18 GHz x05 S 106- S20 S3 straight RPC- N 50 Ω male - RPC-TNC male, 20 4 GHz to 18 GHz 52.5 SW20 x05 S 106- K00 S3 straight RPC- N 50 Ω male - RPC-TNC female 20 DC to 18 GHz 53.6 SW20 x05 K 106- S00 S3 straight RPC- N 50 Ω female - RPC- TNC male 20 DC to 18 GHz 45.8 x05 K 106- K00 S3 straight RPC- N 50 Ω female - RPC- TNC female 20 DC to 18 GHz x05 K 106- K20 S3 straight RPC- N 50 Ω female - RPC-TNC female, 20 4 GHz to 18 GHz
9 Test Devices Series RPC- TNC Devices Test Devices Open - Short - Load Open - Short - Load xordering Number Remarks Return Loss Power Handling Testzubehör x06 S 12L- 000 S3 RPC-TNC open circuit, male, a = 48.8 mm x06 S 12S- 000 S3 RPC-TNC short circuit, male, a = 49.8 mm x06 S 150- C10 S3 RPC-TNC broadband load, calibration kit, male, a = 50.3 mm 0.14 DC to 4 GHz GHz to 18 GHz 0.05 DC to 4 GHz GHz to 18 GHz 35 DC to 4 GHz 25 4 GHz to 18 GHz 0.5 W a 2 x06 K 12L-000 S3 RPC-TNC open circuit, female, a = 59 mm x06 K 12S-000 S3 RPC-TNC short circuit, female, a = 58.6 mm x06 K 150- C10 S3 RPC-TNC broadband load, calibration kit, female, a = 51.4 mm 0.14 DC to 4 GHz GHz to 18 GHz 0.05 DC to 4 GHz GHz to 18 GHz 35 DC to 4 GHz 25 4 GHz to 18 GHz 0.5 W a complete calibration kits also available auch komplette Kalibrierkits erhältlich 47
10 Series RPC- TNC Tools Tools Torque Wrench xordering Number Remarks Drehmomentschlüssel Werkzeuge x06 W flat 15 mm - 55 Ncm torque for RPC- TNC 152 Gauge Block male xordering Number Remarks x06 W 00Z- 002 for RPC- TNC, useable only with gauge 06 W 00S- 000 Kalibrierblock - Stecker ø11.8 SW 15 Gauge Block female xordering Number Remarks x06 W 00Z- 001 for RPC- TNC, useable only with gauge 06 W 00K- 000 Kalibrierblock - Kuppler 29.5 ø11.8 Gauge xordering Number x06 W 00S- 000 Remarks compatible to male connectors for RPC- TNC, useable only with gauge block 06 W 00Z- 002 Messuhr 1 x06 W 00K- 000 compatible to female connectors for RPC- TNC, useable only with gauge block 06 W 00Z
Rosenberger RPC- 7- Steckverbinder erfüllen die Normen: IEC Part 2
3 Series RPC- 7 1Series RPC-7 Rosenberger RPC- 7 connectors are 50 Ω precision coax connectors with an outer conductor diameter of 7 mm. They have been designed with excellent data over the full frequency
SMC, 50 Ω. Features. Product Range
I I 11SMC, 50 Ω Interface Dimensions SMC, 50 Ω Code 39 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene L F G D F D B A E C H K H C E A B MALE Stecker FEMALE Kuppler G SMC, 50 Ω Male Stecker
Connectors with PEEK dielectricum are specifically suitable for high- temperature applications. Further information on request.
6 Series RPC- 2.92 Series RPC- 2.92 1Series RPC-2.92 2.92 RPC- 2.92 Rosenberger RPC- 2.92 are 50 Ω precision connectors with an outer diameter of 2.92 mm. They have been designed with excellent data over
Rosenberger provides SMA, BNC and TNC reverse polarity connectors. Rosenberger bietet Reverse Polarity-Steckverbinder in den Serien SMA, BNC und TNC.
Reverse Polarity coaxial connectors are non-standardized versions of standard connector series: interfaces are similar to the standards, center contacts and dielectricum are reversed: male connectors would
Micro-RF. 294 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
Micro-RF components can be used up to 6 GHz in various wireless applications, e. g. cellular and cordless phones, Bluetooth and wireless LAN applications, PDAs (Personal Digital Assistants) or wireless
SnapN. 248 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
SnapN coaxial connectors can be applied up to 11 GHz and are compatible to Standard N connectors: SnapN jacks (female) and Standard N plugs (male) are intermateable. The outer diameter of 16 mm smaller
SMB, SMC, SMG, SSMB, SSMC
SMB, SMC, SMG, SSMB, SSMC Rosenberger provides the following subminiature coaxial connector series for various application fields: SMB connectors: Snap-on connectors for applications up to 4 GHz SMC connectors:
MCX-Koaxial-Steckverbinder verfügen über eine Schnappverbindung
MCX coaxial connectors, provided with a snap-on coupling mechanism, are mainly applied in RF cable connections up to 6 GHz, e.g. in fixed and wireless communication systems. MCX connectors are characterized
4.3-10 4.1-9.5. 256 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.
The connector system is designed to meet the rising performance needs of mobile network equipment e.g. to connect the RRU to the antenna. Features of the Connectors are compact connector sizes, best electrical
SMB (50 Ω), SMG, SMC, SMB (75 Ω) BT 43
SMB (50 Ω), SMG, SMC, SMB (75 Ω) BT 43 SMB (50 Ω) 1SMB (50 Ω) (50 Ω) - Subminiature Coaxial Connectors with Snap- on Coupling Mechanism SMB connectors are designed with a snap- on connection and can be
FMC. 52 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
MCX (50 Ω) - Mikrominiatur- Koaxialsteckverbinder für Anwendungen bis 6 GHz. (50 Ω) - Microminiature Coaxial Connectors for Frequencies up to 6 GHz
MCX 3 MCX (50 Ω) MCX (50 Ω) 1MCX (50 Ω) (50 Ω) - Microminiature Coaxial Connectors for Frequencies up to 6 GHz MCX - optimal connector series, provided with a snap- on connecting system like SMB connectors,
FMC - Flexible Microstrip Connectors: Toleranzausgleich bei gleichbleibenden elektrischen Eigenschaften. Produkteigenschaften.
2 FMC 1FMC - Flexible Microstrip Connectors: Compensate Misalignments with Repeatable Electrical Characteristics The new, extremely small designed connector series FMC - Flexible Microstrip Connectors*)
QMA - Kostengünstiger Quick- Lock- Einrastmechanismus. Unsere QMA- Steckverbinder entsprechen dem QLF- Standard;
5 1 - Cost- Effective Quick- Lock Mechanism Our Connectors are QLF Products; www.qlf.info connectors defined with features and dimensions by the series SMA, the maximum fequency is 18 GHz. The modified
Mini- SMP. 3Mini- SMP. Extremely small subminiature coaxial connectors for applications up to 65 GHz.
3 Extremely small subminiature coaxial connectors for applications up to 65 GHz. The series is a push- on connection, the characteristic impedance is 50 Ω Compared to the SMP series, the size is approximately
Rosenberger provides Micro-RF components such as Micro-RF test switches, PCB connectors, cable assemblies, adaptors.
Rosenberger provides Micro-RF components such as Micro-RF test switches, PCB connectors, cable assemblies, adaptors. Rosenberger bietet Mikro-HF-Komponenten wie Mikro- HF-Testschalter, -PCB-Steckverbinder,
Test, Measurement & Calibration
Test, Measurement & Calibration For vector network analyzer applications, Rosenberger offers high-flexible microwave test cables while maintaining excellent electrical characteristics. Outstanding phase
Reverse Polarity Connectors (SMA, BNC, TNC)
Reverse Polarity Connectors (SMA, BNC, TNC) 16 SMA Reverse 1SMA Reverse Reverse Polarity - Sub- Miniature Coaxial Connectors with Reverse Center Contacts and Dielectrics up to 18 z "Reverse Polarity"
SERIES Serie SMA SMA
SERIES Serie 5 - Sub- Miniature Coaxial Connectors in Precision Quality for Microwave Applications up to 8 GHz connectors satisfy high quality standards and are characterized by high durability, high
6 FME FME. 140 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
6 Contents 6.1 Straight Plug Crimp................ 143 6.2 Press-In Bulkhead Receptacle, male... 143 6.3 Straight Jack Crimp................ 143 6.4 Bulkhead Plug.................... 144 6.5 Adaptor........................
FMC. Features. Product Range
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
1.6-5.6. This datasheet has been downloaded from http://www.digchip.com at this page
1.6-5.6 This datasheet has been downloaded from http://www.digchip.com at this page 1.6-5.6, II. Generation 11.6-5.6, II. Generation 1.6-5.6, II. Generation - Coaxial Connectors for Applications in Communication
Cable Feed Through and Terminals, UHF, Mini-UHF, FME, Microdot, C, MHV, SHV, HV 4-10, HN
able eed Through and Terminals, UH, Mini-UH, M, Microdot,, MHV, SHV, HV 4-10, HN or very specific applications and requirements Rosenberger provides a wide range of coaxial connector series, e.g. UH, Mini-UH,
Test, Measurement & Calibration
Test, Measurement & Calibration Rosenberger offers a wide range of calibration kits for a variety of standard coaxial test interfaces. The following types are available: Full versions including adaptors
4 UHF UHF. 122 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
4 Contents 4.1 Straight Plug..................... 125 4.2 Straight Plug Crimp................ 125 4.3 Angle Plug...................... 125 4.4 Angle Plug Crimp................. 126 4.5 Bulkhead Jack Crimp...............
SSMB - Mikrominiatur- Koaxial- Steckverbinder mit Snap- on- Verbindung. Produkteigenschaften. Product Features. 7 Product Range.
SSM, SSM 7 SSM 1SSM - Micro- Miniature oaxial onnectors with Snap- on oupling Mechanism SSM connectors series uses a snap- on connection. In doing this connectors are plugged together and are held by
9 SSMB SSMB. 192 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
Contents.1 Straight Plug Crimp............... 15.2 Bulkhead Receptacle, male......... 15.3 Bulkhead Plug Crimp.............. 15.4 PCB Receptacle, male............. 16.5 Angle PCB Receptacle, male........
Climatic category acc. to IEC /155/21... Prüfklasse nach DIN IEC 68 Teil 1
12 Contents 12.1 Straight Plug................... 223 12.2 Straight Plug Crimp.............. 223 12.3 Angle Plug.................... 224 12.4 Angle Plug Crimp............... 225 12.5 U Link, male...................
Koaxiale Steckverbindung Coaxial Connector Series
Koaxiale Steckverbindung Coaxial Connector Series Die Steckverbindung ist bis 18 GHz einsetzbar und eine der am weitesten verbreitete Steckverbindung. SPIER- -Stecker werden nur mit einer ungeschlitzten
BNC - Programm BNC Programme
- Programm S. 215 Adapter Adapters S. 217 -Adapterleitungen adapter leads S. 218 Sicherheits-Adapter Safety adapters www.schuetzinger.de 213 - Programm Die HF-Steckverbindung der Serie ist die häufigste
10 MCX MCX. 200 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
10 Contents 10.1 Straight Plug.................... 203 10.2 Straight Plug Crimp............... 203 10.3 Angle Plug...................... 203 10.4 Angle Plug Crimp................. 204 10.5 Receptacle,
Hochstromkontakte High Power Contacts
Hochstromkontakte High Power Contacts Technische Daten Technical Data Mechanische Daten Mechanical Data Steckkraft (Kontaktpaar) Mating force (pair of contacts) Ziehkraft Unmating force Temperaturbereich
Telegärtner Web: Tel: +49 (0) / Fax: +49 (0) /
223 13 13.1 Bulkhead Plug...228 13.2 Straight Receptacle, Male, for PCB...228 13.3 Angle Receptacle, Male, for PCB...228 13.4 Straight PCB Receptacle in SMT and Edge-Mount...229 13.5 Straight PCB Plug...229
Wir setzen Standards. Connector 4 Small Drives TWINTUS
Wir setzen Standards Connector Small Drives Connector small drives Das kosteneffiziente Stecksystem für energieeffiziente Servomotoren Cost effective connectors for energy efficient servo drives Minimale
Code for Special Contacts Nummernschlüssel für Sonderkontakte
Code for Special Nummernschlüssel für Sonderkontakte Ordering Code Bestellschlüssel Series Features Baureihen-Features FDX-Series FDX-Serie Coaxial contact for cable termination Inner conductor for solder
Telegärtner Web: Tel: +49 (0) / Fax: +49 (0) /
Telegärtner Web: www.telegaertner.com Tel: +49 (0) 71 57 / 1 25 100 Fax: +49 (0) 71 57 / 1 25 120 E-Mail: info@telegaertner.com 67 2 2.1 Straight Plug...72 2.2 Straight Plug Crimp...74 2.3 Angle Plug...76
EN (DIN
Amphenol Amphenol-Tuchel Electronics GmbH Rundsteckverbinder Circular Connectors Rundsteckverbinder entspricht EN 17 5000 (DIN 4 56) Die Rundsteckverbinder der Serie entsprechen den Anforderungen der EN
MMCX Mikrominiaturkoaxialkontakte MMCX Microminiature Coaxial Connectors Technische Daten Technical Data
MMX Mikrominiaturkoaxialkontakte MMX Microminiature oaxial onnectors Technische Daten Technical Data Mechanische Daten Mechanical Data Mechanische Daten Mechanical data Steckkraft max. 15.2 N Mating force
HF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte. 90 Solder pin, 9.4 mm Machined contacts. Stiftleiste Plug connector. Buchsenleiste Socket connector
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte 90 Solder pin, 9.4 mm Machined contacts Stiftleiste Plug connector Buchsenleiste Socket connector A A D D 1 2 3 4 5 5 4 3 2 1 7 8 9 Ø 0. 10 9.4 1.3 max.
Reverse Polarised Connectors R-TNC, R-SMA, R-BNC Reverse polarisierte Steckverbinder R-TNC, R-SMA, R-BNC
15 Reverse Polarised Connectors R-TNC, R-SMA, R-BNC Contents 15.1 R-SMA Straight Plug Crimp............. 272 15.2 R-SMA Angle Plug Crimp............... 272 15.3 R-SMA Straight Jack Crimp..............
Telegärtner Web: Tel: +49 (0) / Fax: +49 (0) /
Telegärtner Web: www.telegaertner.com Tel: +49 (0) 71 57 / 1 25 100 Fax: +49 (0) 71 57 / 1 25 120 E-Mail: info@telegaertner.com 155 8 8.1 Straight Plug...160 8.2 Straight Plug Crimp...160 8.3 Angle Plug...161
Please Note Anmerkung
Please Note We accept no responsibility for the rights of third parties with regards to any of the herein printed tables or descriptions. With this catalog components are illustrated, features are not
DIN Steckverbinder / Connectors
14 DIN 41617 Steckverbinder / Connectors Steckverbinder DIN 41617 Connectors DIN 41617 Dieser traditionelle Steckverbinder geht nach wie vor immer noch seinen Weg in den vielfältigsten Anwendungsbereichen.
Encoder series / Drehgeber-Serie 500
Encoder series / Drehgeber-Serie 500 Leine& Linde AB T +46 152 265 00 F +46 152 265 05 info@leinelinde.se www.leinelinde.com Mounting instructions / Montageanleitung 773562-01, ver. 1.0 RISK OF DAMAGE
8 SMB/SMC/SMS SMB/SMC/SMS
8 Contents 8.1 Straight Plug Crimp.................... 175 8.2 Angle Plug Crimp..................... 175 8.3 Bulkhead Plug........................ 176 8.4 Bulkhead Plug Crimp.................. 176 8.5
Polzahl Contacts 3 PUR 4 PUR 5 PUR 8 2) PUR 8 PUR 12 PUR
Automatisierungstechnik Serie 76 Automation Technology 76 Series Tel: 095 60022 Kabelstecker, umspritzt, Male cable connector, moulded, Kabelstecker, umspritzt, Male cable connector, moulded, 8, 8, SW
Der 7-16 Steckverbinder hat sich durch seine herausragenden
COAXIAL CONNECTORS TYPE 50 Ω Der Steckverbinder hat sich durch seine herausragenden mechanischen und elektrischen Eigenschaften zum weltweit am meisten verwendeten koaxialen Stecksystem für Mobilfunk-Sendeanlagen
SPINNER MOBILE COMMUNICATION
Das Stecksystem N kann bis 11 GHz eingesetzt werden (Präzisionsausführung bis 18 GHz). Der Einsatz ist vorwiegend in Mobilfunkanwendungen mit hohen mechanischen und elektrischen Anforderungen. SPINNER
Verbindungsleitungen Serie 765 Connecting cables series 765. Kurzinformation Brief information Ü TI
Serie Verbindungsleitungen Serie onnecting cables series Kurzinformation rief information 70 7 72 79 2 25 0 58 72 62 69 69 69 7 78 7 76 7 75 85 steckverbinder Verbindungsleitungen der steckverbinder von
1 Title Detail specification for high screened coaxial RF-cable with tin soaked braid. Generic specification: IEC , IEC
ELCRIGID SN 39 225 E with tin soaked braid Seite 1 v 6 1 Title Detail specification for high screened coaxial RF-cable with tin soaked braid 2 Specifications Generic specification: IEC 61196-1, IEC 60096-0-1
High shielded antenna cable / 3-fach geschirmtes Antennenkabel, Date: June 25, 2010 (3)
Product information SKB 395-xx High shielded antenna cable / 3-fach geschirmtes Antennenkabel, Date: June 25, 2010 (3) High shielded antenna cable / 3-fach geschirmtes Antennenkabel Impedance/Wellenwiderstand:
FME, Microdot, F, C, MHV, SHV, HV 4-10, HN, IEC Antenna, Twinax, Twinax- BNC, NET- JET
M, Microdot,,, MV, SV, V 4-10, N, I ntenna, Twinax, Twinax- N, NT- JT M (SP) 1M (SP) (SP) - Special oaxial onnectors for ellular pplications in Vehicles M- ompact miniature connectors developed für mobile
D-Sub, C-Filter, Feed-through Capacitor D-Sub, C-Filter, Durchführungskondensator
D-Sub, C-Filter, Feed-through Capacitor D-Sub, C-Filter, Durchführungskondensator Ordering Code Bestellschlüssel Features, Advantages Merkmale, Vorteile C-Filter Feed-through ceramic capacitor Fully compatible
Catalog 2. RF Coaxial Precision Connectors Test and Measurement Applications. bergerrosenbergerros. bergerrosenbergerros. bergerrosenbergerros
Rosenberger Hochfrequenztechnik Catalog 2 R o s e n b e r g e r R o s e n b e r g e r R o s e n b e r g e r R o s e n bergerrosenbergerros e n b e r g e r R o s e n b e r g e r R o s e n b e r g e r R
Low Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe
Contact Cambridge Connectors. Phone +44 1223 8641 Email: sales@cambridgeconnectors.com Low Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe Ordering Code Bestellschlüssel ALL DIMENSIONS
D-Sub, Mixed Layout, Feed-through Capacitor D-Sub, Mixed Layout, Durchführungskondensator
D-Sub, Mixed Layout, Feed-through Capacitor D-Sub, Mixed Layout, Durchführungskondensator Ordering Code Bestellschlüssel Feature, Advantages Merkmale, Vorteile C-Filter Feed-through ceramic capacitor Fully
Thermische und klimatische Eigenschaften...Climatic Characteristics Prüfklasse nach DIN IEC 68 Teil /155/56...Climatic category acc.
8 Die Serie umfasst sehr häufig verwendete koaxiale Steckverbindungen mit Schraubverschluss. Sie können je nach usführung bis zu einer Frequenz von 18 GHz eingesetzt werden. Der Wellenwiderstand beträgt
M12 DC-POWER-Steckverbinder T-Kodierung M12 DC-POWER-connectors T-coded
BF-C BF-B BF-A 7/8 M8 M-US M-T M-S M-D M-B Verteiler VL M-A M8 M5 RD0 RD M5 Bajonett M M6 IP67 M6 IP0 PP IP67 NCC Bajonett SI IP67 M9 IP67 M9 IP0 PP IP67 MPP IP67 Bajonett SI IP67 SI IP0 M DC-POWER-Steckverbinder
Aufbau des Steckverbinders: Construction of the connector:
Serie 2 0 81 72 62 69 69 71 76 76 71 71 81 77 Subminiatur undsteckverbinder Serie Subminiature circular connectors series Kabelsteckverbinder Steckverbinder mit Schnappverriegelung Schutzart IP 0 1) Ausführungen
Product data sheet Product Data Sheet / Produkt Datenblatt
1 / 6 Design according to Electrical characteristics / Elektrische Eigenschaften Impedance (MIL-C-39012B) Operating frequency up to Value/Wert Unit/Einheit 100 ± 10% [W] 6 [GHz] Return loss DC - 0,5GHz
M12 Automatisierungstechnik - Sonder - US-Kodierung M12 Automation Technology - Special - US-Coding
665 Sonder Sensor 815 866 M12 Automatisierungstechnik - Sonder - US-Kodierung M12 Automation Technology - Special - US-Coding Kabelsteckverbinder Schraubverriegelung nach DIN EN 61076-2-101 Schutzart IP67/IP68
TECHNISCHE DATEN Leistungsrelais Zweispuliges TECHNICAL DATA Power Relay Dual-coil
TECHNISCHE DATEN Leistungsrelais Zweispuliges TECHNICAL DATA Power Relay Dual-coil Seite Modell Bauart Funktion Dauerstrom Elektrischer Anschluß Page Model Design Function Duty rating Electrical link 2-3
D-Sub Dualport Connectors D-Sub Dualport Steckverbinder
Contact Cambridge Connectors. Phone +44 1223 841 Email: sales@cambridgeconnectors.com D-Sub Dualport Connectors D-Sub Dualport Steckverbinder Ordering Code Bestellschlüssel 88 DS 1/27 Technical Data Technische
M12 Verteilerinsel / M12 Splitter box
Serie / Series VER 4-1 Technische Daten Technical data Norm Kabel ohne mit Standard Cable without with Polzahl Kontaktanforderung IEC 947-5-2 4/5 No. of contacts Contact configuration IEC 947-5-2 4/5 Verschmutzungsgrad
Cable specifications (see page 21) Cable specifications (see page 21)
Part No. Y-ConCable-1 4+2 Y-ConCable-2 4+0 for use with Y-Con series plugs, with 4 data and 2 power lines, with Y-Con series plugs, with 4 data lines, mit 4 Daten- und 2 Stromversorgungsleitungen, NICHT
SERIE SHV, HOCHSPANNUNGSVERBINDER
SERIE SHV, HOCHSPANNUNGSVERBINDER BESCHREIBUNG INHALT SEITE HUBER+SUHNER SHV-Verbinder sind koaxiale Hochspannungsverbinder mit hoher Sicherheit (SHV = Safe High Voltage). Die Innenleiter-Kontakte sind
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Low Profile Connectors Steckverbinder mit geringer Einbauhöhe. Product Description Produktbeschreibung
Low Profile Connectors Product Description Produktbeschreibung Advantages and Special Features Low profile desgin for use in appliance with division units Available in sizes 9-way to -way Pin and socket
IDG. Drehzahlsensor / Speed Sensor
Drehzahlen sicher erfassen, anzeigen und kontrollieren For reliable measurement, control and indication of rotational speeds Analogsignal 1-Kanal 1-channel analog signal IDG Drehzahlsensor / Speed Sensor
Katalog Steckverbinder. Catalog Connectors
Katalog Steckverbinder Catalog Connectors TECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12 Bauform Einheit F H11 H15 Type Unit Maximale Polzahl 48 11 15 Maximum Contacts Kontaktreihenbezeichnung
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder Technical Data Technische Daten Mechanical Data Mechanische Daten Shell Gehäuse Insulator Isolierkörper Signal contacts Signalkontakte
Calibration Services Application Note AN001
The Rosenberger calibration laboratory offers two types of calibration services, the and the. Each calibration kit, calibration standard, gauge and torque wrench comes with a calibration certificate if
MICRO MINIATURE & MINI CONNECTORS
MICRO MINIATURE & MINI CONNECTORS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE - INNOVATION
M5 Automatisierungstechnik M5 Automation Technology
707 Automatisierungstechnik Automation Technology Kabelsteckverbinder Schraubverriegelung - und -polig Schutzart IP67 ) Am Kabel angespritzte Ausführungen Gewindering mit Rüttelsicherung Flanschsteckverbinder
TECHNISCHE DATEN Hochleistungsrelais TECHNICAL DATA High Power Relay
TECHNISCHE DATEN Hochleistungsrelais TECHNICAL DATA Seite Modell Bauart Funktion Dauerstrom Elektrischer Anschluß Page Model Design Function Duty rating Electrical link 2-3 Serie 911 Hochleistungsrelais
Automatisierungstechnik - Aktorik - Bauform B Automation Technology - Actuatorics - Size B
5 0 Automatisierungstechnik - Aktorik - Automation Technology - Actuatorics - Size B Gerätesteckdosen Magnetventilsteckdosen Verbindungsleitungen DIN EN 7530-803 Industrie + Niedriges Gehäuse Schutzart
D-Sub, C-Filter, Chip Capacitor D-Sub, C-Filter, Chipkondensator
D-Sub, C-Filter, Chip Capacitor D-Sub, C-Filter, Chipkondensator Ordering Code Bestellschlüssel Features, Advantages Merkmale, Vorteile C-Filter Chip Ceramic capacitor Fully compatible with standard D-Sub
Inserts: Mini- Coax, D- Sub, DIN ( Ω), (75 Ω), High Voltage DIN, Power (DIN D- Sub)
Inserts: Mini- oax, - Sub, 1.0-2.3 IN 41626 (50 + 75 Ω), 0.8-2.7 (75 Ω), igh Voltage IN, Power (IN 41626 + - Sub) 10 Insert Mini oax 1Insert Mini oax Mini oax - Miniature oaxial onnectors for ybrid onnections
Miniatur Rundsteckverbinder Serie 723 Miniature circular connectors series 723. Kurzinformation Brief information Ü TI
Serie 0 09 0 0 6 60 6 0 6 69 69 69 69 6 6 6 66 0 Miniatur undsteckverbinder Serie Miniature circular connectors series Kabelsteckverbinder Steckverbinder mit Schraubverriegelung nach IEC 0-9 Schutzart
M12 AC-POWER-Steckverbinder S-Kodierung M12 AC-POWER-connectors S-coded
BF-C BF-B BF-A 7/8 M8 M-US M-T M-S M-D M-B Verteiler VL M-A M8 M5 RD0 RD4 M5 Bajonett M M6 IP67 M6 IP40 PP IP67 NCC Bajonett SI IP67 M9 IP67 M9 IP40 PP IP67 MPP IP67 Bajonett SI IP67 SI IP40 M AC-POWER-Steckverbinder
Magnetventilsteckverbinder. Solenoid Valve Connectors
87 Magnetventilsteckverbinder Solenoid Valve Connectors 0 Automatisierungstechnik - Automation Technology - Size B Gerätesteckdosen Magnetventilsteckdosen Verbindungsleitungen DIN EN 7530-803 Industrie
TECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12
TECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12 Bauform Einheit D F G H11 H15 HA Type Unit Maximale Polzahl 32 48 64 11 15 10 + 2 Maximum Contacts 7 + 4 Kontaktreihenbezeichnung a c z b d z b d
Miniatur Miniature 115
Miniatur Miniature 70 Miniatur Miniature Kabelsteckverbinder -Verriegelung -polig Schutzart IP67 ) Lötanschluss Am Kabel angespritzte Ausführungen Durchmesser 6 mm Farbige Ausführungen Flanschsteckverbinder
Datenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
Subminiatur Rundsteckverbinder Serie 711 Subminiature circular connectors series 711. Kurzinformation Brief information Ü TI
Serie 11 11 Subminiatur undsteckverbinder Serie 11 Subminiature circular connectors series 11 Kurzinformation rief information 60 0 09 10 11 1 19 0 1 6 60 6 0 6 69 69 69 0 1 1 6 6 6 1 1 66 1 0 6 Kabelsteckverbinder
Steckverbinder für medizinische Anwendungen Connectors for Medical Applications
89 Steckverbinder für medizinische Anwendungen Connectors for Medical Applications 70 IP67 für medizinische Anwendungen IP67 for Medical Applications Kabelsteckverbinder -Verriegelung -polig Schutzart
Micro Push-Pull Subminiature
0 Subminiatur Subminiature Kabelsteckverbinder Push-Pull-Verriegelung -polig Schutzart IP0 ) Lötanschluss Durchmesser 9, mm Flanschsteckverbinder Push-Pull-Verriegelung -polig Schutzart IP0 ) Lötanschluss
Artikelnummern / Part Numbers. Bestellbeispiel / Ordering example Y Datum Name. Bearb Kirmse Gepr Dietrich Vert.
Beschreibung Description: Verteiler nach Vandalengeschützte Einzeltaster für den Einbau in Frontplatten und Gehäuse mit den Einbaumassen 18mm und 22 mm. Bei diesen Ausführungen bestehen sowohl Betätiger
ISLIKER MAGNETE AG - CH-8450
DGV - Datenblätter DGV - Datasheets DGV DGV Übersicht overview Übersicht / Overview Typ Type Dimensionen Dimensions [mm] Drehwinkel Rotary angle [ ] Drehmoment Torque [Ncm] DGV-35.95 35/35 x 27.5 95 DGV-50.95
Steckverbinder für medizinische Anwendungen Connectors for Medical Applications
75 Steckverbinder für medizinische Anwendungen Connectors for Medical Applications 60 für medizinische Anwendungen for Medical Applications Kabelsteckverbinder Snap-in-Verriegelung 8-polig Schutzart IP67
KABELSTECKVERBINDER CABLE CONNECTORS
KABELSTECKVERBINDER CABLE CONNECTORS genormt nach EIA STD RS-225, 339 IEC, MIL-F 24044 bzw. nach 169-5 IEC (13-30) schnelle und einfache Montage Abdichtung der Kabelabfangung mit Plast 2000 Ausführung
Snap-in IP67 Subminiature
60 Subminiatur Subminiature Kabelsteckverbinder Snap-in-Verriegelung 8-polig Schutzart IP67 ) Lötanschluss Am Kabel angespritzte Ausführungen Durchmesser,5 mm Farbige Ausführungen Flanschsteckverbinder
2F1000-xxx to 350 A, DC-EMV-Filter / DC EMI Filters
Application and performance characteristics Typically used to comply with EMC emission standards Reduce conducted emissions over the frequency range 150 khz to 30 MHz Suitable for Industrial, Railway,
M23 Steckverbinder IP67 M23 connectors IP67
R BF-C BF-B BF-A / M M-US M-D M-B Verteiler M PP VL M-A M M RD0 RD M Bajonett M M IP M IP0 PP IP Bajonett SI IP M IP M IP0 PP IP Bajonett SI IP SI IP0 TI Ü binder M Steckverbinder IP M connectors IP M
D-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
M9 IP40 Subminiature. Cable Connectors Screw termination M9 2 8 contacts Degree of protection IP40 1) Solder termination Diameter 11.
Subminiatur M9 IP0 Subminiatur M9 IP0 Subminiature Kabelsteckverbinder Schraubverriegelung M9 8-polig Schutzart IP0 ) Lötanschluss Durchmesser, mm Flanschsteckverbinder Schraubverriegelung M9 8-polig Schutzart