-BOO- - F - 24 V DC 100 % ED
|
|
|
- Ella Seidel
- vor 7 Jahren
- Abrufe
Transkript
1 e s Bestellformel 4 -BOO- - F - 24 V DC ED Order specifications Drehmagnet Rotary solenoid Größe (,, 9) Size (,, 9) Drehwinkel Angular travel Ausführung beidseitiges Wellenende Anschlussart Litze (Standardlänge 20 cm) Gerätestecker 1) Nennspannung Standardspannung ( Zulässige relative Einschaltdauer bei Luftkühlung (LK) 1) Für Steckhülse 6, DIN und Gerätesteckdose Z 801 und Z 811 (s. Seite 16). Anschlussart N nur für die Größen und BOO F N ED 6 9 Shaft design Shaft at both ends Coil terminals Flying leads (20 cm standard length) Plug 1) Nominal voltage Standard voltage (connected to 20 V AC with Si-bridge rectifier) Perm. duty cycle under air cooled conditions (LK) 1) Suits push-on connector 6. DIN and plug-in socket Z 801 and Z 811 (see page 16). N only available for sizes and 9. Thermische Klasse: Prüfspannung: Zubehör: B (T grenz = 10 C) 200 V (eff) Gerätesteckdose Z 801, siehe S. 16 Thermal stability: B (max. permissible temperature = 10 C) Test voltage: 200 V (eff) Accessories: Plug-in socket Z 801, see page 16 KUHNKE Magnetkatalog 01/ KUHNKE Solenoid Catalogue 01/10
2 Nennspannung V DC V DC Voltage rating , Nennwiderstand 97,2 41,6 27,6 17,6, Nominal resistance 2, 2, 4, 4 6, 6 9, 9 1,1 2,4,0 4,2 6,90 1,00 2,10,20 4,10,90 2, 2 2,10 0,9,0 2,20 1,8, 0,6 1,80 1,60 2,9 0,4 1,10 1, 2,40 0,18 0,7 1,20 2,10 4,10,00 4,80,7 6,0 6,40 2,00 0,80,20 2,00 4,00 2,6 4,70,60,90,0,,80 4,0 4,90 1,70 2,80,60 4,1 4,80 2,60,40,60 0,4 1,0 2,0,10 4,70 4, 4,40,80 4,0 1,40 2,60,20,80 4,2 1,0 2,20 4,40 0, 0,88 1,40 2,0,0 6, 6 2,8,0,70 1,20 2,20 2,70,20,60 0,90 1, 2,0 0,14 0,4 0,80 1,20 2,10 9, 9 2,40 2,0 2,0 1,0 1,9 2,0 2,40 2,0 bei Kühlfläche 10 cm 2 ist die 1,7fache ED * By using a cooling surface 10 cm 2, the = Enddrehmoment ( vor Drehwinkelende) = Initial torque = End torque ( before end of rotary angle) Litze ca. 00 g (Drehmasse): ca. 0, kg m 2 Zeitkonstante: ca. 2, 12 ms Flying leads appr. 00 g mass): appr kg m 2 Time constant: appr ms Für 20 V DC Nennspannung (aus mit 20 V DC Nennspannung. können gegenüber der 20 V DC-Reihe For a nominal voltage of 20 V DC (connected to 20 V AC with Si-bridge nominal voltage amounting to 20 V DC those of the 20 V DC range. Ø4 h9 Ø4 h9 M Ø2 1 ±0, 6 ±0, 1 ±0, Ø KUHNKE Magnetkatalog 01/ KUHNKE Solenoid Catalogue 01/10
3 Nennspannung V DC V DC Voltage rating Nennwiderstand 7,4 27,4 1,8 8,7, Nominal resistance 2, 2, 4, 4 6, 6 9, 9 6,8 11,4 16,0 18, 2,,8 11, 14, 17, 2,0 2, 2 11,,2 1, 9,4 10,2 1,,6 6,8 9, 12, 2,2 4,4 8,6 11, 0,8 2,2 7,2 8,9 19,0 1, 21, 16,0 26,0,0 10, 4,4 1,4 9, 17, 12,2 21,0 1,2 2,0 21,0, 16,0 17, 20,0 9,4 1,6 1,2 17,0 19, 11,0 1,8 18,8,1 6,9 9,6 12, 18,0 4, 4 14, 16,0 18,0 8,6 12, 14,0 1, 17,7 8,1 10, 1, 1,9 4, 6,7 9,8 14, 6, 6 1, 14, 1,0 8,1 11,6 12,8 14,0 1,0 4,1,6 9,8 0,6 2,2,,1 9,1 9, 9 9,8 9,8 9,2 6,6 9,0 9,6 9,8 9,2 bei Kühlfläche 00 cm 2 ist die 1,7fache ED * By using a cooling surface 00 cm 2, the = Enddrehmoment ( vor Drehwinkelende) = Initial torque = End torque ( before end of rotary angle) - Litze - Gerätestecker ca. 760 g (Drehmasse): ca., kg m 2 Zeitkonstante: ca. 8 2 ms - Flying leads - Plug appr. 760 g mass): appr kg m 2 Time constant: appr. 8 2 ms Für 20 V DC Nennspannung (aus mit 20 V DC Nennspannung. können gegenüber der 20 V DC-Reihe For a nominal voltage of 20 V DC (connected to 20 V AC with Si-bridge nominal voltage amounting to 20 V DC those of the 20 V DC range. ca.79 ca. 0 Ø6 h9 Ø6 h9 M4 ca ± 0, 80 ± 0, 20 ± 0, Ø Ø0 KUHNKE Magnetkatalog 01/10 16 KUHNKE Solenoid Catalogue 01/10
4 9 9 Nennspannung V DC V DC Voltage rating A 1, 46 2,70 6,40,0 14 8,0 0, , , ,19 2,42 A Nennwiderstand 17,7 8,9 7,0 4, 2, ,6 Nominal resistance 92, 2 9, 94, 4 96, 6 99, , , , , , bei Kühlfläche 1600 cm 2 ist die 1,7fache ED * By using a cooling surface 1600 cm 2, the = Enddrehmoment ( vor Drehwinkelende) = Initial torque = End torque ( before end of rotary angle) - Litze - Gerätestecker ca g (Drehmasse): ca kg m 2 Zeitkonstante: ca. 20 ms - Flying leads - Plug appr g mass): appr kg m 2 Time constant: appr. 20 ms Für 20 V DC Nennspannung (aus mit 20 V DC Nennspannung. können gegenüber der 20 V DC-Reihe For a nominal voltage of 20 V DC (connected to 20 V AC with Si-bridge nominal voltage amounting to 20 V DC those of the 20 V DC range. ca. 64, 2, 19 M6 Ø12 h9 Ø12 h9 ca.11 ca ± 0, 142, ± 0, 0 ± 0, Ø70 Ø KUHNKE Magnetkatalog 01/ KUHNKE Solenoid Catalogue 01/10
5 Diese Produkte entsprechen der Niederspannungsrichtlinie 7/2/EWG. Die Einhaltung der EMV-Richtlinie 89/6/EWG ist mit entsprechenden Schaltgeräten bzw-. Ansteuerungen vom Anwender sicherzustellen. Dieser Katalog ist vor allem für den Konstrukteur, Projekteur und Geräteentwickler bestimmt. Er gibt keine Auskunft über Liefermöglichkeiten. Die angegebenen Daten dienen allein der Produktbeschreibung und sind nicht als garantierte Beschaffenheit des Produktes im Rechtssinne aufzufassen. Beschaffenheitsvereinbarungen bleiben dem konkreten Vertragsverhältnis vorbehalten. Etwaige Schadensersatzansprüche gegen uns gleich aus welchem Rechtsgrund sind ausgeschlossen, soweit uns nicht Vorsatz oder grobe Fahrlässigkeit trifft. Vervielfältigungen, auch auszugsweise, dürfen nur mit Genehmigung des Autors vorgenommen werden. Änderungen, Auslassungen und Irrtümer vorbehalten. These products comply with low voltage regulations 7/2/EWG. The user must ensure that EMC regulation 89/6/EWG is complied with using the appropriate switching devices or drivers respectively. This catalogue is primarily intended for the design and development engineer. It is not an indication of delivery possibilities. The indicated data only serve the description of the product, they are not to be understood as the guaranteed quality of the product in legal terms. Agreements as to the quality of the product are reserved to the proper contractual relationship. Claims of damages against us on whatever grounds are excluded, except in instances of deliberate intent or gross negligence on our part. Reproduction, even of extracts only with the author s approval. We reserve the rights of modification, omission, error.
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Mikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert
NW 0,//,6/ /- und /-Wege Sitzventile 0.//.6/ mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar, z.b. drei unterschiedliche Sockelformen (Standard-,
Made in W-Germany. kv=0,12 l/min (NW 0,5) P2[bar] kv=0,45 l/min (DN 1) P2[bar] kv=0,70 l/min (NW 1,5) P2[bar]
NW 0,//, /- und /-Wege Sitzventile 0.//. mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar z. B.: drei unterschiedliche Sockelformen (Standard-,
ISLIKER MAGNETE AG - CH-8450
DGV - Datenblätter DGV - Datasheets DGV DGV Übersicht overview Übersicht / Overview Typ Type Dimensionen Dimensions [mm] Drehwinkel Rotary angle [ ] Drehmoment Torque [Ncm] DGV-35.95 35/35 x 27.5 95 DGV-50.95
Magnetventile. Solenoid Valves. Betätigungsmagnet Typ 64 für Baureihe 64/79/81/83/87. Type 64 for Series 64/79/81/83/87
Magnetventile Solenoid Valves Betätigungsmagnet Typ 64 für Baureihe 64/79///7 Type 64 for Series 64/79///7 Elektrische Daten 64er Magnetsystem Elektrische Ausführung: gemäß VDE 050, VDE 00 Ansprechstrom:
Diese Produkte entsprechen der Niederspannungsrichtlinie
Magnete Solenoids Diese Produkte entsprechen der Niederspannungsrichtlinie 2014/3/EU. Die Einhaltung der EMV-Richtlinie 2014/30/EU ist mit entsprechenden Schaltgeräten bzw-. Ansteuerungen vom Anwender
Diese Produkte entsprechen der Niederspannungsrichtlinie
Magnete Solenoids Diese Produkte entsprechen der Niederspannungsrichtlinie 2014/3/EU. Die Einhaltung der EMV-Richtlinie 2014/30/EU ist mit entsprechenden Schaltgeräten bzw-. Ansteuerungen vom Anwender
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Schaltfunktion function. piping. Technische Änderungen vorbehalten / modifications reserved Stand / stand: 07/2012
fremdgesteuert externally controlled Schaltfunktion function Elektrischer Anschluss M12x1 electrical connector M12x1 Die Ventile arbeiten als Druckwaage und werden im Bypass eingesetzt. Der Mediumsdruck
ISLIKER MAGNETE AG - CH-8450
GI-50.10 GI-50.10 1 / Hub / stroke = 10mm 110.5 9 68.5 3x M O 0 M6 18 SW5 O50 O6 Magnet bestromt gezeichnet Solenoid illustrated in energised position 6 max. Hub / stroke = 10mm 110.5 39 68.5 3x M O 0
ISLIKER MAGNETE AG - CH-8450
GKu - Datenblätter GKu - Datasheets AG - CH-40 Andelfingen - Tel. +41 (0)2 30 2 2 - [email protected] - www.islikermagnete.ch GKu GKu Übersicht overview Übersicht / Overview Typ Type Dimensionen Dimensions
Electrical tests on Bosch unit injectors
Valid for Bosch unit injectors with order numbers 0 414 700 / 0 414 701 / 0 414 702 Parts Kit Magnet*: - F00H.N37.925 - F00H.N37.933 - F00H.N37.934 * For allocation to the 10-place Bosch order number,
Solenoid Valves. Magnetventile. Type 65 for Series 65/79/81/83/87. Betätigungsmagnet Typ 65 für Baureihe 65/79/81/83/87
Magnetventile Solenoid Valves Betätigungsmagnet Typ 65 für Baureihe 65/79///7 Type 65 for Series 65/79///7 Elektrische Daten 65er Magnetsystem Elektrische Ausführung: mäß VDE 050, VDE 00 Ansprechstrom:
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogs or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Electrical testing of Bosch common rail Injectors
Electrical testing of Bosch common rail Injectors Contents: 1. Adapter cable for Hybridtester FSA 050 (article number 0 684 010 050 / 1 687 023 571) 2. Electrical testing of Bosch common rail solenoid
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Typenreihe GH Lifting Solenoids
Hubmagnete Lifting Solenoids Bauart Hubmagnete der Reihe GH können mit Durchmessern zwischen 5 mm und 65 mm und mit Hublängen von 8 bis 60 mm gefertigt werden. Serien mäßig wer den sie mit Wellenenden
Umschaltventile Magnete
Umschaltventile Magnete DFE1/6 estellnr. Typ 2-11-12 DFE1/618ES-W22-12VDC 2-11-13 DFE1/618ES-W22-24VDC 24--116 DFE1/618ES-Y22-12VDC 24--117 DFE1/618ES-Y22-24VDC 24--1 DFE1/618ES-W22-12VDC 24--12 DFE1/618ES-W22-24VDC
Umschaltventile Magnet
Umschaltventile Magnet DFE1/3 estellnr. Typ 2-11-1 DFE1/318ES-W22-12VDC 2-11-1 DFE1/318ES-W22-24VDC 24-2-116 DFE1/318ES-Y22-12VDC 24-2-117 DFE1/318ES-Y22-24VDC Weitere Umschaltventil Varianten auf nfrage
Typenreihe GH Lifting Solenoids
Hubmagnete Lifting Solenoids Bauart Hubmagnete der Reihe GH können mit Durchmessern zwischen 5 mm und 65 mm und mit Hublängen von 8 bis 60 mm gefertigt werden. Serien mäßig wer den sie mit Wellenenden
Electrical testing of Bosch common rail piezo injectors
Applies to generation CRI 3: Bosch 10-position order number 0 445 115 = CRI 3-16 (CRI 3.0) 1600 bar 0 445 116 = CRI 3-18 (CRI 3.2) 1800 bar 0 445 117 = CRI 3-20 (CRI 3.3) 2000 bar Tools required: Hybrid
TECHNISCHE DATEN Leistungsrelais Zweispuliges TECHNICAL DATA Power Relay Dual-coil
TECHNISCHE DATEN Leistungsrelais Zweispuliges TECHNICAL DATA Power Relay Dual-coil Seite Modell Bauart Funktion Dauerstrom Elektrischer Anschluß Page Model Design Function Duty rating Electrical link 2-3
Datenblatt. P-series PDU 2.5/4/4AN
Turn five into three that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means
GM - Miniatur Magnet. GM - Miniature solenoid ISLIKER MAGNETE
GM - Miniatur Magnet GM - GM GM Übersicht overview Baureihe Dimensionen Hub Fmin GM-.05 23 x x 40 5 2 GM-26.08 x 26 x 50 8 5.5 GM-35. 40 x 35 x 60 9 Type Dimensions Stroke Fmin GM-.05 23 x x 40 5 2 GM-26.08
Electrical testing of Bosch common rail solenoid valve (MV) injectors
Applies to MV injector, generation: -CRI 1.0 / 2.0 / 2.1 / 2.2 -CRIN 1 / 2 / 3, with K oder AK plug Bosch 10-position order number Bosch-Bestellnummer CRI: 0 445 110 xxx Bosch-Bestellnummer CRIN: 0 445
SPINNER MOBILE COMMUNICATION
KOAXIALE ABSCHLUSSWIDERSTÄNDE & DÄMPFUNGSGLIEDER COAXIAL LOADS & ATTENUATORS Abschlusswiderstände übernehmen häufig die Funktion einer Antenne während der Test- oder Einmessphase einer Mobilfunk-Basisstation.
/ Technische Änderungen und drucktechnische Irrtümer vorbehalten.
EZ-0225-V10 Air Bearing Spindle High accurancy air bearing spindle with direct drive. Equipped with an water-cooled synchronous motor (frequency at nominal speed 400 Hz), Power output 1880 W. Rotary encoder
Technische Änderungen vorbehalten / modifications reserved Stand / stand: 10/2015
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff Dichtwerkstoff
GTP - Permanent Elektro Haftmagnet Datenblätter. GTP - Permanent electro magnet Datasheets
GTP - Datenblätter GTP - Datasheets GTP GTP Übersicht overview Übersicht / Overview Typ Type Dimensionen Dimensions [mm] F Haft F Holding [N] GTP-20 Ø20 x 22 70 GTP-30 Ø30 x 32 130 GTP-34 Ø34 x 39.6 260
ISLIKER MAGNETE AG - CH-8450
GM - Datenblätter GM - Datasheets GM GM Übersicht overview Übersicht / Overview Typ Type Dimensionen Dimensions [mm] Hub Stroke [mm] F min F min [N] GM-.05 23 x x 40 5 1.9 GM-26.08 x 26 x 50 8 3.5 GM-35.
Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H
Rotary Dampers with high-torque range WRD-H 67 WRD-H 85 WRD-H 128 WRD-H 161 WRD-H 21 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Applications: - Mechanical and
Datenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
Deceleration Technology. Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H
Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H 6030 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:
Technische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
OPTOELEKTRONIK Vertriebs GmbH
OPTOELEKTRONIK Vertriebs GmbH Katalog / Catalogue LWL-Weitverkehrsumsetzer / Long distance FO converters Dezember 2003 2003 OPTOELEKTRONIK Vertriebs GmbH. Alle Rechte vorbehalten. Die Vervielfältigung
Deceleration Technology. Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H
Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H 12070 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:
direktgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 135 Type 135
zwangsgesteuert, flüssigkeitsgedämpft force pilot operated, fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff
Certificate of conformity Generating unit, NS-protection
Applicant: Product: Certificate of conformity Generating unit, NS-protection Schneider Electric Solar Inverters USA, Inc. 250 South Vasco Road Livermore, California 94551 USA Photovoltaic Inverter with
Overcurrent Protection Leaded Disks, Coated, 12 V, 24 V
B99* C 93 C 99 Applications Overcurrent and short-circuit protection b 3, max. Features Lead-free terminals Manufacturer s logo and type designation stamped on in white Low resistance For rated currents
GTP - Permanent Elektro Haftmagnet. GTP - Permanent Electro Magnet
GTP - GTP - GTP GTP Übersicht overview Baureihe Dimensionen FHalte GTP-20 Ø20 x 22 70 GTP-30 Ø30 x 32 130 GTP-34 Ø34 x 39.6 260 GTP-60 Ø60 x 53.5 620 Type Dimensions Fholding GTP-20 Ø20 x 22 70 GTP-30
Certificate of conformity Generating unit, NS-protection
Certificate of conformity Generating unit, NS-protection Applicant: Product: Schneider Electric Solar Inverters USA, Inc. 250 South Vasco Road Livermore, California 94551 USA Photovoltaic Inverter with
Typenreihe GY Type Group GY. Klein-Hubmagnete Small lifting solenoids
Klein-Hubmagnete Small lifting solenoids Typenreihe GY Type Group GY Bauart Hubmagnete der Reihe GY wer den für Gleichspannungsan schluss geliefert. Die Querschnittsabmessungen (B x H) liegen zwischen
P V W/set N / 20 % 2530 B66317-G-X130 N / 20 % < 0,59
Core B66317 In accordance with IEC 61246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A = 1,1 mm 1 l e = 57,5 mm A e = 52,5 mm 2 A min = 51,5 mm 2 V e = 3 020 mm 3 Approx.
LBK 2/11. Lichtbandsystem Continuous Row Lighting System. 11-poliges Lichtbandsystem 11-pole continuous row lighting system
LBK 2/11 Lichtbandsystem Continuous Row Lighting System 11-poliges Lichtbandsystem 11-pole continuous row lighting system Kompakte Ausführung Compact design Vorkonfektionierte Einheiten lieferbar Available
Sensors Motor Protection, Triple Sensors
B900 M 00 Applications Thermal protection of winding in electric motors Limit temperature monitoring Features Thermistor pellets with insulating encapsulation in series connection (triple sensor) Low-resistance
Halogenleuchten Halogen Lights. Halogen
Halogenleuchten Halogen Lights Halogen LD 1.10-1 Einbauleuchte - 10W mit matter Scheibe - 20W mit klarer Scheibe - 2000mm Leitung doppelt isoliert mit Steckverbinder - Klemmbefestigung - Energieeffizienzklasse:
Electromagnetic Flowmeter FXE4000-DE43F
Pos: 2 /Grid-Layout/Titelblätter/Ersatzteilblätter/Durchfluss/FXE4000-DE43F @ 65\mod_1350460748604_3101.docx @ 523546 @ @ 1 === Ende der Liste für Textmarke Cover === Spare Parts List SPL/FXE4000-DE43F-EN
PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module
LSS PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module The LSS PROFIBUS-DP repeaters 1 to 1 and 1 to 5 are used for coupling up to six PROFIBUS bus segments in RS 485 bus technology.
P V W/set N / 20 % 2460 B66311-G-X130 N / 20 % < 0,27
Core B663 In accordance with IEC 6246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A =,44 mm l e = 46,3 mm A e = 32, mm 2 A min = 3,9 mm 2 V e = 490 mm 3 Approx. weight 7,3
diameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
Technical Terms Technische Daten: Operating voltage Betriebsspannungsbereich Rated Voltage Nennspannung
Technical Terms Technische Daten: Operating voltage Betriebsspannungsbereich Rated Voltage Nennspannung 4...7 V 5 V *) Rated Current Nennstrom < 50 ma Sound Output [SPL]at 10 cm Lautstärke[Schalldruckpegel]
VDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. USV-Zubehör UPS-Accessories Typ(en) / Type(s): A) PDM35xxIEC-yyy B) PDM13xxIEC-yyy
[82252] Druckmessumformer für gasförmige oder flüssige Medien DIGICONTROL F-SPT-U...
DIGICONTROL- Gerätedatenblatt F-SPT-U www.gfr.de [82252] Kategorie: Sensoren und Wächter Druckmessumformer für gasförmige oder flüssige Medien DIGICONTROL F-SPT-U... Anwendung Der Druckmessumformer F-SPT-U...
Tachogeneratoren. Gehäuse ø95 mm, lagerlose Ausführung GTB 9. Merkmale. Kurze Reaktionszeit Leerlaufspannung mv pro U/min
Tachogeneratoren Einseitig offene Hohlwelle 12-16 mm oder Konuswelle 17 mm (1:10) Gehäuse 95 mm, lagerlose Ausführung Merkmale Kurze Reaktionszeit 10...60 mv pro U/min Einseitig offene Hohlwelle 12-16
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Elektronischer Schalter, Zeitschalter Electronic switch,
ITAC Bedienungsanleitung User manual. Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren.
D Bedienungsanleitung User manual Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren. This user manual contains important information for installation and operation.
INSTALLATION AND OPERATING INSTRUCTIONS FOR imp1-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx
BEDIENUNGSANLEITUNG To comply with the published safety standards, the following must be observed when using this power supply. Um den zur Zeit gültigen Sicherheitsbestimmungen zu genügen, müssen die nachstehenden
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Steckdose Socket-outlet Typ(en) / Type(s): 6211..EMS Si/I
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Elektroinstallationskanalsysteme für Wand und Decke Cable
2/2-way solenoid valve - Type 239
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 10 40 Druckbereich Gehäusewerkstoff Messing Dichtw erkstoff Sitzventil mit
direktgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Hochstromkontakte High Power Contacts
Hochstromkontakte High Power Contacts Technische Daten Technical Data Mechanische Daten Mechanical Data Steckkraft (Kontaktpaar) Mating force (pair of contacts) Ziehkraft Unmating force Temperaturbereich
ETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
Technische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Inhaltsverzeichnis. Contents. 6 Wärmeplatten WP, Betriebstemperatur bis 300 C 62 WP Heating Plates, operating temperature up to 300 C
Inhaltsverzeichnis Contents 6 Wärmeplatten WP, Betriebstemperatur bis 300 C 62 WP Heating Plates, operating temperature up to 300 C 6 Wärmeplatten WP, Betriebstemperatur 50 bis 300 C 62 WP Heating Plates,
2/2-way plastic solenoid valve - Type 104
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 1,0 2,5 Druckbereich Gehäusewerkstoff
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. PV-Wechselrichter mit selbsttätiger Freischaltstelle
Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. edraulic rescue equipment
Technical Report No. 028-7130 95685-050 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
direktgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Espresso-Kaffeebereiter mit Mühle Espresso coffee maker
HF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. DEHNbloc MAXI, DEHNbloc, DEHNgap Typ(en) / Type(s): DB
2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
ABB i-bus EIB. EIB Power Supply Units
ABB i-bus EIB EIB Power Supply Units Product Range Overview EIB Power Supplies ABB STOTZ-KONTAKT GmbH, 2002 - SK 029 F 02 E Product Range Overview EIB Power Supplies! EIB Power Supply, 320 ma SV/S 30.320.5!
Snap-in switch for switches PSE, MSM and MCS 30
Product manual Snap-in switch for switches PSE, MSM and MCS 30 CONTENTS 1. PRODUCT DESCRIPTION 2. DATA AND DIMENSIONAL DRAWINGS 2.1. Technical Data 2.2. Dimensions of PSE with a Mounting Diameter 19 mm
Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen
Technical Report No. 028-71 30 95685-350 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen
