Integral Manifolds for Rosemount Transmitter Model 3051 / 3095 / 088 Integrierte Ventilblöcke für Rosemount Meßumformer 3051 / 3095 / 088
Integral Manifolds Integrierte Ventilblöcke Schneider Integral Manifolds have been developed for the Rosemount Transmitter Model 3051/3095/088. The manifold / transmitter combination is fully assembled, calibrated and leak tested by Rosemount. The compact, lightweight assembly reduces design costs, on-site assembly and testing costs. Potential leaks are minimized. Die integrierten Ventilblöcke von Armaturenfabrik Franz Schneider wurden für Rosemount Meßumformer der Serie 3051/3095/088 entwickelt. Die Ventilblock / Meßumformer- Kombination wird von Rosemount komplett montiert, kalibriert und druckgeprüft angeliefert. Die kompakte, leichte Einheit verringert Designkosten, Montagekosten in der Anlage und Prüfkosten. Potentielle Leckagestellen sind minimiert. Coplanar Style Integral Manifolds Integrierte Ventilblöcke Coplanar Style valve manifolds / -fach Ventilblöcke 3 valve manifolds / 3-fach Ventilblöcke 5 valve manifolds / 5-fach Ventilblöcke Mounting options / Montagebeispiele Mounting accessories / Montagezubehör page / Seite 4 page / Seite 5 page / Seite 6 page / Seite 7 / 8 page / Seite 13 Traditional Style Integral Manifolds Integrierte Ventilblöcke Traditional Style valve manifolds / -fach Ventilblöcke 3 valve manifolds / 3-fach Ventilblöcke 5 valve manifolds / 5-fach Ventilblöcke Mounting options / Montagebeispiele Mounting accessories / Montagezubehör page / Seite 9 page / Seite 10 page / Seite 11 page / Seite 1 page / Seite 13 Pressure Manifolds Ventile für Druckmeßumformer valve manifolds / Doppelventile Block and bleed valves / Absperrventile Mounting options / Montagebeispiele page / Seite 14 / 15 page / Seite 14 / 15 page / Seite 15 - - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Features Merkmale External stem thread. Stem with rolled threads, back seat and nonrotating valve tip. Valve tip in austenitic stainless steel (Standard); also available with soft tip in KEL-F (PCTFE) or Delrin (POM). Packing PTFE or graphite. Available with material certificates according to EN 10 04 / 3.1.B. 100% pressure tested. For any other requirements please consult the factory. Außenliegendes Spindelgewinde. Rollverdichtete Ventilspindel mit Rückdichtung und drehbarem Ventilkegel aus Edelstahl (Standard); auch mit Ventilkegel aus KEL-F (PCTFE) oder Delrin (POM) lieferbar. Packung aus PTFE oder Graphit. Mit Abnahmeprüfzeugnis nach EN 10 04/3.1.B lieferbar. 100%ige Druckprüfung. Sonderausführungen auf Wunsch lieferbar. Qty. / Stck. Item Pos. Components Einzelteile 1 valve 1-fach valve -fach 3 valve 3-fach 5 valve 5-fach Material Werkstoff 1 Body Gehäuse 1 1 1 1 SST316 L 1.4404 Valve Stem Ventilspindel 1 3 5 SST316 L 1.4404 3 Valve Tip Ventilkegel 1 3 5 SST316 TI 1.4571 4 Bonnet Spindelführung 1 3 5 SST316 1.4401 5 Packing Packung 1 3 5 see page siehe Seite 6 Vent Valve Entlüftungsventil - - - SST316 L 1.4404 Pressure / Temperature Ratings Druck Temperatur - Diagramme Manifold with PTFE Packing Manifold with Graphite Packing Model cleaned and degreased for oxygen service Ventilblock mit PTFE-Packung Ventilblock mit Graphit-Packung Ausführung öl- und fettfrei für Sauerstoff The broken lines indicate the operating range of the manifold. The operating range of the Integral Manifold / Transmitter combination is determined by the medium, the material of the gasket between manifold and transmitter and the temperature limit of the Model 3051 Transmitter ( standard = straight lines). 1) PN 160 for Traditional Style Integral Manifolds with M10 mounting hole. - 3 - Die gestrichelten Linien zeigen den Einsatzbereich des Ventilblocks. Der Einsatzbereich der Ventilblock / Meßumformer- Kombination wird bestimmt durch Art des Mediums, den Werkstoff des Dichtringes zwischen Ventilblock und Meßumformer und der Einsatzgrenze des Meßumformers (Standard = durchgezogene Linie). 1) PN 160 bei integrierten Ventilblöcken 'Traditional Style' mit M10 Befestigungsgewinde. Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Coplanar Style Valve Integral Manifolds Integrierte -fach Ventilblöcke Coplanar Style see scale - up on page 3 siehe Vergrößerung auf Seite 3 NOTE: Dimensions are in mm Alle Maße in mm Weight / Gewicht: 1, kg Rosemount Schneider Nominal Pressure Process connection Packing Mounting hole Remarks Model Code Artikel-Nr. Artikel-Nr. Nenndruck Prozeßanschluß Packung Befestigungsgewinde PN Ø E Ø M Bemerkungen 305FCA11 8100-0885-100 N54.44.49.08 40 1/4 NPT PTFE 3/8-16 UNC 305FCA11SG 8100-0885-105 N54.44.49.08NC 40 1/4 NPT PTFE 3/8-16 UNC NACE MR01-305FCA11P 8100-0885-103 N54.44.49.08F5 50 1/4 NPT PTFE 3/8-16 UNC O 1) 305FCA1 8100-0886-100 N54.44.49.080 40 1/4 NPT Graphite 3/8-16 UNC 305FCB11 8100-0885-00 N54.44.49.06 40 1/ NPT PTFE 3/8-16 UNC 305FCB11SG 8100-0885-05 N54.44.49.06NC 40 1/ NPT PTFE 3/8-16 UNC NACE MR01-305FCB11P 8100-0885-03 N54.44.49.06F5 50 1/ NPT PTFE 3/8-16 UNC O 1) 305FCB1 8100-0886-00 N54.44.49.060 40 1/ NPT Graphite 3/8-16 UNC 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff - 4 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Coplanar Style 3 Valve Integral Manifolds Integrierte 3-fach Ventilblöcke Coplanar Style see scale - up on page 3 siehe Vergrößerung auf Seite 3 NOTE: Dimensions are in mm Alle Maße in mm Weight / Gewicht:,00 kg Rosemount Schneider Nominal Pressure Model Code Artikel-Nr. Artikel-Nr. Nenndruck Process connection Prozeßanschluß Packing Packung Mounting hole Befestigungsgewinde PN Ø E Ø M Remarks Bemerkungen 305FC3A11 8100-0885-3100 N54.39.49.08 40 1/4 NPT PTFE 3/8-16 UNC 305FC3A11SG 8100-0885-3105 N54.39.49.08NC 40 1/4 NPT PTFE 3/8-16 UNC NACE MR01-305FC3A11P 8100-0885-3103 N54.39.49.08F5 50 1/4 NPT PTFE 3/8-16 UNC O 1) 305FC3A1 8100-0886-3100 N54.39.49.080 40 1/4 NPT Graphite 3/8-16 UNC 305FC3B11 8100-0885-300 N54.39.49.06 40 1/ NPT PTFE 3/8-16 UNC 305FC3B11SG 8100-0885-305 N54.39.49.06NC 40 1/ NPT PTFE 3/8-16 UNC NACE MR01-305FC3B11P 8100-0885-303 N54.39.49.06F5 50 1/ NPT PTFE 3/8-16 UNC O 1) 305FC3B1 8100-0886-300 N54.39.49.060 40 1/ NPT Graphite 3/8-16 UNC 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff - 5 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Coplanar Style 5 Valve Integral Manifolds Integrierte 5-fach Ventilblöcke Coplanar Style see scale - up on page 3 siehe Vergrößerung auf Seite 3 Option: ) Type / Ausführung N54.48.493... NOTE: Dimensions are in mm Alle Maße in mm Test/Vent connections 1/4 NPT on process side Weight / Gewicht:,40 kg Rosemount Schneider ) Nominal Pressure Model Code Artikel-Nr. Artikel-Nr. ) Nenndruck Process Mounting connection ) Distance Packing hole Prozeßanschluß ) Lochabstand Packung Befestigungsgewinde PN Ø E A Ø M Remarks Bemerkungen 305FC5A11 8100-0885-5100 N54.48.49.08 40 1/4 NPT 4 PTFE 3/8-16 UNC 305FC5A11SG 8100-0885-5105 N54.48.49.08NC 40 1/4 NPT 4 PTFE 3/8-16 UNC NACE MR01-305FC5A11P 8100-0885-5103 N54.48.49.08F5 50 1/4 NPT 4 PTFE 3/8-16 UNC O 1) 305FC5A1 8100-0886-5100 N54.48.49.080 40 1/4 NPT 4 Graphite 3/8-16 UNC 305FC5B11 8100-0885-500 N54.48.49.06 40 1/ NPT 40 PTFE 3/8-16 UNC 305FC5B11SG 8100-0885-505 N54.48.49.06NC 40 1/ NPT 40 PTFE 3/8-16 UNC NACE MR01-305FC5B11P 8100-0885-503 N54.48.49.06F5 50 1/ NPT 40 PTFE 3/8-16 UNC O 1) 305FC5B1 8100-0886-500 N54.48.49.060 40 1/ NPT 40 Graphite 3/8-16 UNC 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff ) Test/vent connections 1/4 NPT optional on process side (part no. N54.48.493... instead of N54.48.49...), if tube fittings shall be used. The standard types can be fitted with elbow connectors up to 8 mm dia. Prüf- / Entlüftungsanschlüsse 1/4 NPT optional auf der Prozeßseite (Artikel-Nr. N54.48.493... anstatt N54.48.49...), wenn Rohrverschraubungen zur Anwendung kommen sollen. Die Standardausführungen können werkseitig mit Winkelverschraubungen bis 8 mm Ø ausgeführt werden. - 6 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Mounting Options for Coplanar Style Integral Manifolds Montagebeispiele für Integrierte Ventilblöcke Coplanar Style Coplanar Bracket for " Pipe Mounting Material: Stainless Steel Coplanar-Montagewinkel für " Rohrmontage Werkstoff: Edelstahl Rosemount Option Code B4-7 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Bracket for " Pipe Mounting, Wall or Rack Mounting Montagewinkel für " Rohr-, Wand- oder Gestellmontage Accessory kit for Zubehörsatz für Wall or rack mounting Wand- oder Gestellmontage Pipe mounting Rohrmontage Carbon Steel, galv. Stahl verzinkt Mounting hole 3/8-16 UNC Befestigungsgewinde 3/8-16 UNC S006.4.100.4 S006.4.100.44 Schneider Schneider Artikel-Nr. Stainless Steel Edelstahl Mounting hole 3/8-16 UNC Befestigungsgewinde 3/8-16 UNC S006.4.00.4 S006.4.00.44-8 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Traditional Style Valve Integral Manifolds Integrierte -fach Ventilblöcke Traditional Style NOTE: Dimensions are in mm Alle Maße in mm Weight / Gewicht:,40 kg Rosemount Schneider Nominal Pressure Model Code Artikel-Nr. Artikel-Nr. Nenndruck Process Mounting connection ) 3) Packing hole 3) Prozeß- Befestigungsgewinde anschluß ) 3) Packung 3) 305FTA11 8100-0895-100 N54.64.49.0 40 1/4 NPT/IEC PTFE 7/16-0 UNF 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff ) 1/ NPT process connections available through optional oval flange adaptors (see page 1) or integral (instead of flange connection) 1/ NPT Prozeßanschluß lieferbar über Ovalflansch (siehe Seite 1) oder integriert im Gehäuse (anstelle des Flanschanschlusses) 3) Flange connection according to DIN 19 13-A with M10 resp. M1, acc. to IEC 61518 with 7/16-0 UNF mounting holes Flanschanschluß nach DIN 19 13-A mit M10 bzw. M1, nach IEC 61518 mit 7/16-0 UNF Befestigungsgewinde - 9 - PN Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148 Ø D Remarks Bemerkungen 305FTA11SG 8100-0895-105 N54.64.49.0NC 40 1/4 NPT/IEC PTFE 7/16-0 UNF NACE MR01-305FTA11P 8100-0895-103 N54.64.49.0F5 50 1/4 NPT/IEC PTFE 7/16-0 UNF O 1) 305FTA1 8100-0896-100 N54.64.49.00 40 1/4 NPT/IEC Graphite 7/16-0 UNF - 8100-0895-110 N54.64.49.03 160 1/4 NPT/DIN PTFE M10-8100-0895-115 N54.64.49.03NC 160 1/4 NPT/DIN PTFE M10 NACE MR01- - 8100-0895-113 N54.64.49.03F5 160 1/4 NPT/DIN PTFE M10 O 1) - 8100-0896-110 N54.64.49.030 160 1/4 NPT/DIN Graphite M10-8100-0895-10 N54.64.49.04 40 1/4 NPT/DIN PTFE M1-8100-0895-15 N54.64.49.04NC 40 1/4 NPT/DIN PTFE M1 NACE MR01- - 8100-0895-13 N54.64.49.04F5 50 1/4 NPT/DIN PTFE M1 O 1) - 8100-0896-10 N54.64.49.040 40 1/4 NPT/DIN Graphite M1
Traditional Style 3 Valve Integral Manifolds Integrierte 3-fach Ventilblöcke Traditional Style NOTE: Dimensions are in mm Alle Maße in mm Weight / Gewicht:,50 kg Rosemount Schneider Nominal Pressure Model Code Artikel-Nr. Artikel-Nr. Nenndruck Process Mounting connection ) 3) Packing hole 3) Prozeß- Befestigungsgewinde anschluß ) 3) Packung 3) 305FT3A11 8100-0895-3100 N54.66.49.0 40 1/4 NPT/IEC PTFE 7/16-0 UNF 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff ) 1/ NPT process connections available through optional oval flange adaptors (see page 1) or integral (instead of flange connection) 1/ NPT Prozeßanschluß lieferbar über Ovalflansch (siehe Seite 1) oder integriert im Gehäuse (anstelle des Flanschanschlusses) 3) Flange connection according to DIN 19 13-A with M10 resp. M1, acc. to IEC 61518 with 7/16-0 UNF mounting holes Flanschanschluß nach DIN 19 13-A mit M10 bzw. M1, nach IEC 61518 mit 7/16-0 UNF Befestigungsgewinde - 10 - PN Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148 Ø D Remarks Bemerkungen 305FT3A11SG 8100-0895-3105 N54.66.49.0NC 40 1/4 NPT/IEC PTFE 7/16-0 UNF NACE MR01-305FT3A11P 8100-0895-3103 N54.66.49.0F5 50 1/4 NPT/IEC PTFE 7/16-0 UNF O 1) 305FT3A1 8100-0896-3100 N54.66.49.00 40 1/4 NPT/IEC Graphite 7/16-0 UNF - 8100-0895-3110 N54.66.49.03 160 1/4 NPT/DIN PTFE M10-8100-0895-3115 N54.66.49.03NC 160 1/4 NPT/DIN PTFE M10 NACE MR01- - 8100-0895-3113 N54.66.49.03F5 160 1/4 NPT/DIN PTFE M10 O 1) - 8100-0896-3110 N54.66.49.030 160 1/4 NPT/DIN Graphite M10-8100-0895-310 N54.66.49.04 40 1/4 NPT/DIN PTFE M1-8100-0895-315 N54.66.49.04NC 40 1/4 NPT/DIN PTFE M1 NACE MR01- - 8100-0895-313 N54.66.49.04F5 50 1/4 NPT/DIN PTFE M1 O 1) - 8100-0896-310 N54.66.49.040 40 1/4 NPT/DIN Graphite M1
Traditional Style 5 Valve Integral Manifolds Integrierte 5-fach Ventilblöcke Traditional Style NOTE: Dimensions are in mm Alle Maße in mm Weight / Gewicht:,70 kg Rosemount Schneider Nominal Pressure Model Code Artikel-Nr. Artikel-Nr. Nenndruck Process Mounting connection ) 3) Packing hole 3) Prozeß- Befestigungsgewinde anschluß ) 3) Packung 3) 305FT5A11 8100-0895-5100 N54.68.49.0 40 1/4 NPT/IEC PTFE 7/16-0 UNF 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff ) 1/ NPT process connections available through optional oval flange adaptors (see page 1) or integral (instead of flange connection) 1/ NPT Prozeßanschluß lieferbar über Ovalflansch (siehe Seite 1) oder integriert im Gehäuse (anstelle des Flanschanschlusses) 3) Flange connection according to DIN 19 13-A with M10 resp. M1, acc. to IEC 61518 with 7/16-0 UNF mounting holes Flanschanschluß nach DIN 19 13-A mit M10 bzw. M1, nach IEC 61518 mit 7/16-0 UNF Befestigungsgewinde - 11 - PN Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148 Ø D Remarks Bemerkungen 305FT5A11SG 8100-0895-5105 N54.68.49.0NC 40 1/4 NPT/IEC PTFE 7/16-0 UNF NACE MR01-305FT5A11P 8100-0895-5103 N54.68.49.0F5 50 1/4 NPT/IEC PTFE 7/16-0 UNF O 1) 305FT5A1 8100-0896-5100 N54.68.49.00 40 1/4 NPT/IEC Graphite 7/16-0 UNF - 8100-0895-5110 N54.68.49.03 160 1/4 NPT/DIN PTFE M10-8100-0895-5115 N54.68.49.03NC 160 1/4 NPT/DIN PTFE M10 NACE MR01- - 8100-0895-5113 N54.68.49.03F5 160 1/4 NPT/DIN PTFE M10 O 1) - 8100-0896-5110 N54.68.49.030 160 1/4 NPT/DIN Graphite M10-8100-0895-510 N54.68.49.04 40 1/4 NPT/DIN PTFE M1-8100-0895-515 N54.68.49.04NC 40 1/4 NPT/DIN PTFE M1 NACE MR01- - 8100-0895-513 N54.68.49.04F5 50 1/4 NPT/DIN PTFE M1 O 1) - 8100-0896-510 N54.68.49.040 40 1/4 NPT/DIN Graphite M1
Mounting Options for Traditional Style Integral Manifolds Montagebeispiele für Integrierte Ventilblöcke Traditional Style Traditional Brackets for " Pipe Mounting Montagewinkel für " Rohrmontage Rosemount Option Code B1 / B7 / BA Bracket for Pipe Mounting Montagewinkel für Rohrmontage Rosemount Option Code B3 / B9 / BC Flat Bracket for Pipe mounting Montagewinkel für Rohrmontage NOTE: Option Codes only valid for and 3 Valve Integral Manifolds with 7/16-0 UNF mounting holes. For 5 Valve Integral Manifolds and Manifolds with metric mounting holes please consult the factory. Option Codes gelten nur für Integrierte - und 3-fach Ventilblöcke mit 7/16-0 UNF Befestigungsgewinden. Montagewinkel für Integrierte 5-fach Ventilblöcke und Ventilblöcke mit metrischen Befestigungsgewinden sind auf Wunsch lieferbar. Rosemount Option Code B1 B3 B7 B9 BA BC Traditional Bracket Options Montagewinkel Optionen Brackets for Pipe Mounting, CS Bolts Montagewinkel für Rohrmontage, Schrauben aus Stahl Flat Brackets for Pipe Mounting, CS Bolts Montagewinkel für Rohrmontage, Schrauben aus Stahl B1 Brackets with Series 300 SST Bolts B1 Montagewinkel mit Baureihe 300 Edelstahlschrauben B3 Brackets with Series 300 SST Bolts B3 Montagewinkel mit Baureihe 300 Edelstahlschrauben SST B1 Brackets with Series 300 SST Bolts Edelstahl B1 Montagewinkel mit Baureihe 300 Edelstahlschrauben SST B3 Brackets with Series 300 SST Bolts Edelstahl B3 Montagewinkel mit Baureihe 300 Edelstahlschrauben - 1 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Mounting Accessories Montagezubehör Single or Twin Ferrule Compression Tube Fittings Schneidring- oder Klemmringverschraubungen All Integral Manifolds are available with tube fittings installed at the process ports. Alle Integrierten Ventilblöcke sind lieferbar mit Schneidring- oder Klemmringverschraubungen (montiert am Eingang). Single ferrule tube fittings acc. to DIN 353 Schneidringverschraubungen nach DIN 353 Twin ferrule compression tube fittings, Manufacturer acc. to customer specification Klemmringverschraubungen, Hersteller nach Kundenspezifikation Oval Flanges Ovalflansche Oval flanges are available for Traditional Style Integral Manifolds 1) Standard connection: Material: Schneider : 1/ NPT female SST 316 L N006.19.456. Ovalflansche sind lieferbar für die Integrierten Ventilblöcke Traditional Style 1) Standardausführung: Muffe 1/ NPT Werkstoff: Edelstahl 1.4404 Schneider Artikel-Nr.: N006.19.456. Accessory kit ) incl.: Zubehörsatz ) bestehend aus: Hex bolts / Sechskantschrauben 7/16-0 UNF x 1 3/8 1 PTFE gasket / Dichtring Socket head cap screws / Innensechskantschrauben 7/16-0 UNF x 1 3/8 1 PTFE gasket / Dichtring Schneider Schneider Artikel-Nr. CS, galvanized Stahl, verzinkt S006.38.119.04 S006.36.119.04 SST, A4-70 Edelstahl, A4-70 S006.38.19.04 S006.36.19.04 1) Coplanar Style Integral Manifolds are also available with flange connection for oval flanges. For demands, please consult the factory. Integrierte Ventilblöcke Coplanar Style sind auch auf Wunsch mit Ovalflanschanschluß lieferbar. ) Accessory kits for metric bolts and alternative sealing gasket materials, please consult the factory. Zubehörsätze für metrische Schrauben und alternative Dichtring-Werkstoffe auf Wunsch lieferbar. - 13 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Pressure Manifolds Ventile für Druckmeßumformer The Pressure Manifolds are designed for use with Rosemount Pressure Transmitters Model 3051T and 088. The valve manifolds are provided with one instrument isolation valve and one vent/drain/calibrate valve for the test port. The Block and Bleed Valve is provided with an isolation valve and a vent/drain plug. Die Ventile wurden für Rosemount Meßumformer der Serie 3051T und 088 entwickelt. Die Doppelventile sind mit einem Meßgeräte- Absperrventil und einem Prüf-/Entlüftungsventil (für Prüfanschluß) ausgeführt. Das Absperrventil ist zusätzlich mit einer Entlüftungsschraube ausgeführt. Valve Manifolds Doppelventile Type / Ausführung VMM Type / Ausführung VMF 1/4-NPT female with screw plug Muffe 1/4 NPT mit Verschlußschraube Weight / Gewicht: 1,000 kg Weight / Gewicht: 0,950 kg Block and Bleed Valves Absperrventile Type / Ausführung BMM Flow pattern Schaltschema Type / Ausführung VMM / VMF Type / Ausführung BMM Weight / Gewicht: 0,650 kg NOTE: Dimensions are in mm [Dimensions for PN 700-design] Alle Maße in mm [Maße für Ausführung PN 700] - 14 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Rosemount Schneider Type Nominal Pressure Model Code Artikel-Nr. Artikel-Nr. Ausführung Nenndruck Valve Manifolds / Doppelventile PN Process connection Prozeßanschluß Packing Packung 306FTAA11 8100-0905-00 N354.60.40.85 700 PTFE Remarks Bemerkungen 306FTAA11SG 8100-0905-05 N354.60.40.85NC 700 PTFE NACE MR01-306FTAA11P 8100-0905-03 N354.60.40.05F5 VMM 50 1/ NPT male PTFE O 1) 306FTAA1 8100-0906-00 N354.60.40.050 40 Graphite 306FTAA1SG 8100-0906-05 N354.60.40.05NG 40 Graphite NACE MR01-306FTAA1P 8100-0906-07 N354.60.40.05F4 306FTBA11 8100-0905-100 N354.66.403.85 700 PTFE 50 Graphite O 1) 306FTBA11SG 8100-0905-105 N354.66.403.85NC 700 PTFE NACE MR01-306FTBA11P 8100-0905-103 N354.66.403.05F5 VMF 50 1/ NPT female PTFE O 1) 306FTBA1 8100-0906-100 N354.66.403.050 40 Graphite 306FTBA1SG 8100-0906-105 N354.66.403.05NG 40 Graphite NACE MR01-306FTBA1P 8100-0906-107 N354.66.403.05F4 Block and Bleed Valves / Absperrventile 306FT1AA11 8100-0905-100 N354.0.40.05 40 PTFE 306FT1AA11SG 8100-0905-105 N354.0.40.05NC BMM 40 1/ NPT male PTFE 1) cleaned and degreased for oxygen service / öl und fettfrei für Sauerstoff 50 Graphite O 1) NACE MR01- Mounting Options for Pressure Manifolds Montagebeispiele für Ventile für Druckmeßumformer Bracket for " Pipe Mounting Material: Stainless Steel Montagewinkel für " Rohrmontage Werkstoff: Edelstahl Model 3051T Model 088 Rosemount Option Code B4-15 - Armaturenfabrik Franz Schneider GmbH & Co.KG D-746 Nordheim Germany Tel. +49(0)7133/101-0 Fax +49(0)7133/101-148
Other Schneider Integral Manifolds Weitere Integrierte Ventilblöcke von Armaturenfabrik Franz Schneider Armaturenfabrik Franz Schneider supplies technically advanced, high quality instrument valve products for pressure, flow and level measurement and similar applications. All Schneider valves and manifolds are complemented by a full range of accessories. There are many more Integral Manifolds for all kinds of application in our product range, examples as shown below. Armaturenfabrik Franz Schneider liefert technisch hochwertige Qualitätsarmaturen für die Meß- und Regeltechnik für Druck, Differenzdruck und Füllstandsmessungen und ähnlichen Anwendungsfeldern. Alle Schneider Ventile und Ventilblöcke werden ergänzt durch ein umfassendes Zubehörprogramm. Unser Produktprogramm beinhaltet weitaus mehr Integrierte Ventilblöcke für die unterschiedlichsten Anwendungen, Beispiele siehe unten. 5 Valve Integral Manifold / Integrierter 5-fach Ventilblock 'Natural Gas Metering Pattern' Instrument Protection Systems, fully assembled Schutzkastensysteme, komplett montiert 5 Valve Integral Manifold / Integrierter 5-fach Ventilblock 'Soft seat design' Armaturenfabrik Franz Schneider GmbH & Co. KG Bahnhofplatz 1 D - 746 Nordheim Germany Tel.: +49 (0) 7133/101-0 Fax: +49 (0) 7133/101-148 Internet: http://www.as-schneider.com E-Mail: Info@AS-Schneider.com - 16-05/00