Open-air area North: FN 826/5 LIFETIME EXCELLENCE Visit us! ACCESS PLATFORMS MESSEGUIDE TRADE FAIR GUIDE PALFINGER MESSEGUIDE TRADE FAIR GUIDE Visit us! KP-BAUMA2016 LIFETIME EXCELLENCE Open-air area South: FS 1304/1
Units shown in the leaflet are partially optional equipped and do not always correspond to the standard version. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes. Die abgebildeten Geräte sind teilweise mit Wunschausrüstung ausgestattet und entsprechen nicht immer der Standardausführung. Beim Aufbau sind länderspezifische Vorschriften zu beachten. Maßangaben unverbindlich. Technische Änderungen, Irrtümer und Übersetzungsfehler vorbehalten. ÜBERSICHT INHALT OVERVIEW CONTENT OVERVIEW CONTENT Units shown in the leaflet are partially optional equipped and do not always correspond to the standard version. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes. ÜBERSICHT INHALT Die abgebildeten Geräte sind teilweise mit Wunschausrüstung ausgestattet und entsprechen nicht immer der Standardausführung. Beim Aufbau sind länderspezifische Vorschriften zu beachten. Maßangaben unverbindlich. Technische Änderungen, Irrtümer und Übersetzungsfehler vorbehalten.
LADEKRANE LOADER CRANES PK 200002 L SH PK 165.002 TEC 7 PK 42002 SH PK 20.501L TEC 3 PK 10002 SH PK 7.501 SLD 5 PK 7.001K SLD 3 PK 5.001 SLD 3 4 5 6 7 8 9 10 11 EQUIPMENT 12 EPSILON FORST- UND RECYCLINGKRANE EPSILON TIMBER AND RECYCLING CRANES M12Z105 13 SANY PALFINGER VENTURE SPS 20000 14 HAKENGERÄTE HOOKLIFTS ISOTIP PS T 14 TEC T 20 MITNAHMESTAPLER TRUCK MOUNTED FORKLIFTS F3 253 PX 15 16 17 18 1
VISIT OUR FANSHOP! OPEN-AIR AREA NORTH: FN 826/5 2
STARKE ARGUMENTE STRONG ARGUMENTS AOS Das Aktive Schwingungsdämpfungsystem verhindert ein "Nachschwingen" bei raschem Abbremsen oder Lastwechsel. The active oscillation suppression system prevents "post-oscillation" in the event of rapid braking or load changes. HPSC Die variable Stützenpositionierung des High Performance Stability Control Systems ermöglicht die maximale Ausschöpfung der Hubleistung. The variable stabiliser positioning of the High Performance Stability Control System allows the full lifting capacity of the crane. KTL Kathodische Tauchlackierung - Die UV-beständige Beschichtung garantiert Langzeit Oberflächenschutz. Cathodic Dip Painting - The UV-resistant coating guarantees long-term surface protection. PALTRONIC 150 Mit der Paltronic 150 bietet PALFINGER eine Steuerungselektronik für den Serienkran. The PALTRONIC 150, PALFINGER offers the latest control electronics for the series production crane. POWER LINK PLUS Mit dem 15 Grad überstreckbaren Knickarm kommen Sie durch niedrige Türöffnungen und arbeiten auch in Gebäuden. With the 15 degree reverse linkage system, you can reach through low door openings and also work inside buildings. S-HPLS Zu den wichtigsten Funktionen der PALTRONIC 150 zählt das S-HPLS. Ein vollautomatisches System zur Hubkrafterhöhung. S-HPLS is one of the most important functions of the PALTRONIC 150. It is a fully automatic system for increasing lifting power. SOFT STOPP Die Soft Stopp Funktion ist eine elektronische Endlagendämpfung. Sie bewirkt ein sanftes Abbremsen alle Kranbewegungen bevor der Endanschlag erreicht wird. The Soft Stop function is an electronic limit position damper. It causes gentle braking of all crane movements before the limit position is reached. 3
PK 200002 L SH LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 150,7 mt / 1478 knm Max. hydraulische Reichweite Max. hydraulic outreach 25,6 m Max. Reichweite (mit 2. Knickarm) Max. outreach (with fly-jib) 47,9 m Schwenkbereich Slewing angle Endlos Continuous Hohe Mobilität durch Aufbau auf Standard LKW Sehr steifes und leichtes Armsystem durch neues P-Profil Hydraulische Hubhöhe von annähernd 49 Metern durch Langarmbauweise Spezielles Abstützkonzept mit ausfahrbarer Heckstütze Hohe Arbeitsgeschwindigkeit durch Zweikreishydraulik 4 High mobility due to the mounting on standard truck chassis Very stiff and light boom system thanks to new P-Profile Hydraulic lifting height of roughly 49 meters thanks to long boom design Special stabiliser concept with extendable rear stabiliser High working speed thanks to double circuit control
PK 165.002 TEC 7 LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 124,8 mt / 1224,3 knm Max. hydraulische Reichweite Max. hydraulic outreach 21,0 m Max. Reichweite (mit 2. Knickarm) Max. outreach (with fly-jib) 36,1 m Schwenkbereich Endlos Slewing angle Continuous Eigengewicht Standardkran Dead weight (standard) Power Link Plus Paltronic 150 S-HPLS PALcom P7 Soft Stopp Optional: - DPS-C - HPSC Plus - P-Fold - PJ 240 oder PJ 300 - Seilwinde 3,5t / 4,5t 11610 kg Power Link Plus Paltronic 150 S-HPLS PALcom P7 Soft Stop Optional: - DPS-C - HPSC Plus - P-Fold - PJ 240 oder PJ 300 - Rope winch 3,5t / 4,5t 5
PK 42002 SH LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 41,1 mt / 402,8 knm Max. hydraulische Reichweite Max. hydraulic outreach 21,0 m Max. Reichweite (mit 2. Knickarm) Max. outreach (with fly-jib) 31,2 m Schwenkbereich Endlos Slewing angle Continuous Eigengewicht Standardkran Dead weight (standard) 6 Hohe Wertbeständigkeit durch KTL-Beschichtung Mehr Komfort und Sicherheit durch Soft Stopp Maximale Ausschöpfung des Arbeitsbereiches durch HPSC Mehr Hubkraft durch S-HPLS Effizienter und schneller durch Endlosschwenkwerk 3851 kg High value retention due to KTL coating More comfort and safety due to Soft Stop Maximum utilisation of the working range due to HPSC More lifting power due to S-HPLS More efficient and faster due to continuous slewing
PK 20.501L TEC 3 LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 19,7 mt / 193,6 knm Max. hydraulische Reichweite Max. hydraulic outreach 13,7 m Schwenkbereich Slewing angle 440 Eigengewicht Standardkran Dead weight (standard) 2400 kg Optimale Schmierung des Schwenkwerks durch Ölbad bis zum Kopflager Maximaler Aktionsradius dank 440 Grad Schwenkwinkel Vermeidung von Beschädigungen der Hydraulikleitungen und kompakte Aufbaumasse durch neues innenliegendes Schlauchführungskonzept Optimized lubrication of the slewing mechanism thanks to an oil bath right up to the head bearing Maximum radius of action thanks to slewing angle of 440 degrees Avoiding damage of the hydraulic hoses and compact set-up dimensions thanks to the new internal hose guiding system 7
PK 10002 SH LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 9,4 mt / 91,9 knm Max. hydraulische Reichweite Max. hydraulic outreach 14,1 m Schwenkbereich 400 Slewing angle Eigengewicht Standardkran Dead weight (standard) Maximum an Präzision und Sicherheit durch optionales AOS Hohe Wertbeständigkeit durch KTL-Beschichtung Mehr Hubkraft durch S-HPLS Zusätzliche Einsatzmöglichkeiten durch Power Link Plus Mehr Komfort und Sicherheit durch Soft Stopp 8 1070 kg Maximum precision and safety thanks to optional AOS High value retention thanks to KTL coating More lifting power due to S-HPLS Additional applications with Power Link Plus Increased comfort and safety due to Soft Stop
PK 7.501 SLD 5 LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 6,8 mt / 66,9 knm Max. hydraulische Reichweite Max. hydraulic outreach 11,2 m Schwenkbereich 400 Slewing angle Eigengewicht Standardkran Dead weight (standard) Single Link Paltronic Überlastsicherung Standsicherheitsüberwachung ISC-S Optional: - Standsicherheitsüber wachung HPSC-L, HPSC-E - Funkfernsteuerung 780 kg Single Link Paltronic overload protection Stability monitoring system ISC-S Optional: - Stability monitoring system HPSC-L, HPSC-E - Radio remote control 9
PK 7.001K SLD 3 LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 6,2 mt / 60,9 knm Max. hydraulische Reichweite Max. hydraulic outreach 8,8 m Schwenkbereich Slewing angle 400 Eigengewicht Standardkran Dead weight (standard) 735 kg Single Link Paltronic Überlastsicherung Standsicherheitsüberwachung ISC-S Optional: - Standsicherheitsüber wachung HPSC-L, HPSC-E - Funkfernsteuerung Single Link Paltronic overload protection Stability monitoring system ISC-S Optional: - Stability monitoring system HPSC-L, HPSC-E - Radio remote control 10
PK 5.001 SLD 3 LADEKRANE LOADER CRANES Max. Hubmoment Max. lifting moment 4,6 mt / 45,0 knm Max. hydraulische Reichweite Max. hydraulic outreach 11,1 m Schwenkbereich Slewing angle 400 Eigengewicht Standardkran Dead weight (standard) 695 kg Single Link Paltronic Überlastsicherung Optional: - Standsicherheitsüber wachung ISC-S (Standard bei CE), HPSC-L, HPSC-E - Funkfernsteuerung Single Link Paltronic overload protection Optional: - Stability monitoring system ISC-S (standard for CE), HPSC-L, HPSC-E - Radio remote control 11
WÄHLEN SIE IHR EQUIPMENT CHOOSE YOUR EQUIPMENT PALFINGER EQUIPMENT zeigt auf der BAUMA 2016 eine Vielzahl an Produkten mit einen besonderen Fokus auf den Bereich Aufbauequipment. Gemäß dem Motto Ein Partner für Ihre Anwendungen können Sie sich auf unserem Messestand - Freigelände Nord FN 826/5 - über alle Equipment Applikationen von PALFINGER informieren. PALFINGER EQUIPMENT provides a variety of products with a special focus on the categorie of mounting accessories at the BAUMA 2016. In line with the slogan One partner for your application you are able to be informed on all equipment applications of PALFINGER at our exhibition booth Open Air Area North FN 826/5. 12
M12Z105 RECYCLINGKRANE RECYCLING CRANES Max. Hubmoment Max. lifting moment 104 knm Max. Reichweite Max. outreach 10,50 m Schwenkbereich Slewing angle 425 Eigengewicht ohne Gelenk/Rotator Dead weight without joint/rotator 2560 kg Hochsitz - Master Drive mit Kranfahrerschutz Leistungsstark durch Geschwindigkeit und Präzision Patentiertes Epslink und Epscope Kransäule komplett im Ölbad wartungsarm Innenliegende Schlauchführung: Serviceöffnungen machen einen Austausch problemlos möglich Hohe Wertbeständigkeit durch KTL-Beschichtung Master Drive with tinted plastic hood High performance due to speed and precision Patented Epslink and Epscope Crane column in an oil bath low maintenance Inside hose routing - service opening makes replacement a simple task High value retention due to KTL coating 13
SPS 20000 SANY PALFINGER VENTURE Lastmoment Lifting moment 20 mt Reichweite 14,3 m Outreach Schwenkwinkel Slewing angle Continuous Eigengewicht Self weight 3820 kg 14 m Reichweite durch gewichtsoptimiertes Ausschubsystem, gefertigt aus hochfestem Stahl Endlos Schwenkwerk mit selbstsperrendem Planetengetriebe 8 t Seilwindentraglast im 4-straengigem Betrieb Die hydraulische KolbenmotorSeilwinde ist kompakt integriert in der Kransäule 14 14 m outreach due to weight optimized boom extension system, produced of high strength steel Continous Slewing System with self-locking planetary slewing gear 8 t winch capacity in 4 partline operation The hydraulic piston-motorwinch is compactly integrated into the crane column
ISOTIP ABROLLKIPPER HOOKLOADER Ladungs- und Kippkapazität Loading & tipping capacity up to 23 t Gesamtgerätlänge Total unit length 6720 mm Gesamthöhe mit ISO 1CC Total Height with ISO 1CC 3950 mm zgg LKW Recommended chassis (GVW) 26 to 32 t Einfaches und sicheres Handling Breiter Anwendungsbereich Selbständiges ISO Ladesystem Schneller Wechsel von ISO Containern auf Abrollbehälter nach DIN 30722 Easy & safe handling system Wide scope of applications Autonomous ISO loading Quick change from ISO to standard container 15
PS T 14 TEC ABSETZKIPPER SKIPLOADER Max. Hub- / Kippkraft Max. Loading capacity 14 t Gerätelängen Unit length 3800-4200-4600 mm Teleskopausschub Telescope strocke 1400 mm Eigengewicht Dead weight 3100 kg LKW-Gesamtgewicht GVW truck 19 t Einfache Ladungssicherung Für alle DIN-Norm Behälter Volle Übersicht während des Arbeitsvorganges Werkslackierung und geschraubte, schweißfreie Montage Große Auswahl an Optionen 16 Complete container blocking during transport For all container standards Total visibility during operation Ex-works final coating, bolted truck mounting Wide choice of options
T 20 ABROLLKIPPER HOOKLOADER Kippwinkel Tipping Angle 46-53 Gerätelängen Unit length 4750-6300 mm Transporthöhe Trasport height 240 mm Eigengewicht Dead weight 2070-2315 kg LKW-Gesamtgewicht GVW truck 26 t Knickarmsystem Flache Ladekurve Unterflurbeladung Unterdachbeladung Ermöglicht Ladung von kürzeren Behältern Articulated hook arm system Flat loading curve Under floor loading Under roof loading Ability to handle shorter containers 17
F3 253 PX MITNAHMESTAPLER TRUCK MOUNTED FORKLIFTS Traglast Load capacity 2500 kg @ 1450 mm Motor Engine 3 und 4 Zyl. Dieselmotor 3 and 4-cyl. diesel engine Hubhöhe Lift height 3100 bis 3700 mm Eigengewicht (o. Gabeln) Dead weight (without forks) ab 1865 kg (o. Gabeln) Flexibel und vielseitig Das beste Eigengewicht zum Nutzlastverhältnis 2,5 t Hubkraft vor den Rädern Höchste Wendigkeit Problemloses Be- und Entladen von einer Seite Flexible and versatile The best dead-weight-topayload ratio 2,5 t lifting power in front of the wheels Maximum manoeuverbility Easy loading and unloading from one side 18