Machine Brochure. MÜLLER WEINGARTEN Blanking line.

Transkript

1 Machine Brochure MÜLLER WEINGARTEN Blanking line Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße Neckarsulm GERMANY +49 (0) : [email protected]

2 Blanking Line (for blank preparation) (pre-owned) Manufacturer: MÜLLER WEINGARTEN page 1 of 3, Stock No.: Stock No.: Controls: PLC SIEMENS S7 Revised: 2011 Press Design frame design openings in uprights opening in table moving bolster Press Table clamping surface (left-right) clamping surface (front-back) height above floor level Ram ram force clamping surface (left-right) clamping surface (front-back) stroke number of strokes max ram (mechan. press) ram adjustment Tool Assembly Dimensions shut height (stroke down, adjustment up) distance between columns (H-frame) free passage between side columns (width) free passage between side columns (height) Decoiler design sheet width max sheet width (min) max. weight of coil max. diameter of coil min. internal diameter of coil H-frame yes yes yes to /min single coil to

3 page 2 of 3, Stock No.: leveler unit sheet width max 2000 sheet width (min) 400 sheet thickness max 2 sheet thickness (min) 0,6 number of leveler rolls 13 diameter of leveler rolls 50 Feeders feeder: type sheet width max sheet thickness max feeding step max. Electrical specifications mains power supply mains voltage Description of condition roll feeder kva V BLANK CUTTING LINE FOR OUTER PANEL COMPONENTS FOR AUTOMOTIVE APPLICATIONS Video under : In 2011 the complete equipment was revised: - SEW and Siemens components electronically sychronized: NEW - Drive shaft of the straightening device: NEW - Guidance of sheet metal: Optimized - Complete Electrics and electronics (S 7) : NEW - Drive Unit of the Press: * PREVIOUSLY: Grease Lubrication * NOW: Oil Circuit Lubrication FURTHERMORE: N E W NSM destacking unit with 2 stations with length up to 4000 (price new Euro 2.3million) and a sidewise NSM destacking unit (price new Euro 1.2million)

4 Technical description SCOPE OF DELIVERY/ COMPONENTS: - Coil carrier with separate crop shear - single sided decoiler, - max coil width 2000, max weight 30tons - Straightening unit with 13 straightening rolls, max blank thickness 1.8, max. blank width Loop pit - Roll feeder with roll diameter 220, feed length max Monitoring of oilfilm thickness via scanner - Mechanical Blanking Press MUELLER WEINGARTEN VK * with max. 55 strokes per minute * Table dimensions ( clamping surface 2800 x 2800 * 2 Changing tables and 350 stroke travel - FIRST NSM Blank destacker unit with 2 unloading stations - Max. blank dimensions 4000 x Conveyance speed meters per minute - Packet weight max kgs - Packet height max (On this part finishing for side panel cutouts via controlled dies) page 3 of 3, Stock No.: SECOND NSM unloading and stacking unit (90 towards flow through) - for smaller blanks and form blanks. SET UP TIMES: approx 15 minutes for complete retooling (tool and prograe change, new coil, final/ scrap cuts) approx 10 minutes for partial tool change (tool and prograe change, existing coil, PERFORMANCE: 240 to 270 tons cut blanks per day in a 3 shift operation

5 Blanking Line MÜLLER WEINGARTEN Photos 1/9

6 Blanking Line MÜLLER WEINGARTEN Photos 2/9 Coil-Feeder Type Müller Weingarten Typ Coil width Sheet metal width Coil-External Ø Coil Internal Ø 610 Coil Weight kg Feed length max Coil height feed above floor 1600 External croph shear for Coil preparation Unilateral Coiler Spreader Coil Mandril Lateral travel 4150 Crop shear: No. of cropped pieces for 500 length 10 Opening height 160 Straightener (chromium plated) No. Straightening rolls 13 Ø Straightening rolls 50 Coil loop bridge Length Width Depth Roll feed unit Feed accuracy for up to 1000 Feed accuracy for up to 2500 Feed accuracy for up to 4000 Feed rolls Air tunnel top roll Max. feed length ± 0.10 ± 0.25 ±

7 Blanking Line MÜLLER WEINGARTEN Photos 3/9 Decoiler, Straightener & Feeder Small blank Destacker Press with Tool Carts Large Blank Destacker unit

8 Blanking Line MÜLLER WEINGARTEN Photos 4/9 Direction of coil Stroke Adjustment 2x4 Optima- Fasteners, type DESA 20 SDAU* Sheet metal height Height of Window Scrap Coil width Floor Scrap tunnel Interface Crop shear Moving bolster (total width) * SDAU = Stroke down Adjustment up

9 Blanking Line MÜLLER WEINGARTEN Photos 5/9

10 Blanking Line MÜLLER WEINGARTEN Photos 6/9

11 Blanking Line MÜLLER WEINGARTEN Photos 7/9

12 Blanking Line MÜLLER WEINGARTEN Photos 8/9

13 Blanking Line MÜLLER WEINGARTEN Photos 9/9