eccentric presses HESSE - FP / CDCS / CHCH / CDCK
|
|
- Christian Schubert
- vor 8 Jahren
- Abrufe
Transkript
1 Exzenterpressen HESSE - FP / CDCS / CDCH / CDCK eccentric presses HESSE - FP / CDCS / CHCH / CDCK Mod. CDCS 1600 P81
2 C-Ständer Exzenterpressen mit 4-fach Stößelführung Mod. FP 10 P Mod. CDCS 1250 P Standardausführung FP Modelle standard equipment FP models 4-fach Stößelführung Manuelle Hubverstellung Manuelle Stösselverstellung Aufspannplatte Lichtschranke Antrieb über Getriebe Elektro-pneumatische Kupplungs-Bemsskobination Fester Tisch Einzel- und Dauerhub Mechanische Überlastsicherung Manuelle Zentalschmierung Maschine und Ausrüstung entsprechend den CE-Vorschriften 4-fold ram guide manual stroke adjustment manual ram adjustment bolster plate light guard gear driven electro-pneumatic clutch break combination fixed table single and continous stroke mechanical overload safety device manual central lubrication machine and equipment in conformity with CE-regulations Standardausführung CDCS P Modelle standard equipment CDCS P models 4-fach Stößelführung Manuelle Hubverstellung Manuelle Stößelverstellung Antrieb über Getriebe Elektro-pneumatische Kupplungs-Bremskombination Fester Tisch Einzel- und Dauerhub Mechanische Überlastsicherung (bei Modellen bis 150 ton) Hydraulische Überlastsicherung (bei Modell mit 250 ton) Manuelle Zentralschmierung (bei Modellen bis 80 ton) Automatische Zentralschmierung (bei Modellen ab 125 ton) Automatische Kreislaufschmierung (bei Modell mit 250 ton) Maschine und Ausrüstung entsprechend den CE-Vorschriften 4-fold ram guide manual stroke adjustment manual ram adjustment gear driven electro-pneumatic clutch break combination fixed table single and continous stroke mechanical overload safety device (models up to 150 ton) hydraulic overload safety device (model with 250 ton) manual central lubrication (models up to 80 ton) automatic central lubrication (models off 125 ton) automatic closed loop lubrication (model with 250 ton) machine and equipment in conformity with CE-regulations Optionen CDCS P Modelle optional equipment CDCS P models Automatische Hubverstellung Motorische Stößelverstellung (bei Modellen ab 40 ton) Aufspannplatte Lichtschranke Geschwindigkeitsregulierung Vibrationspads Ziehkissen Hydraulische Überlastsicherung (für Modelle unter 250 ton) Automatische Zentalschmierung (für Modelle unter 125 ton) automatic stroke adjustment motorized ram adjustment (models off 40 ton) bolster plate light guard speed control vibration pads die cushion hydraulic overload safety device (for models under 250 ton) automatic central lubrication (for models under 125 ton) 2
3 C-frame eccentric press with 4-fold ram guide FP 10 P 15 P 20 P 30 P 40 P Presskraft / capacity ton Einbauhöhe / daylight mm Hubverstellung / stroke adjustment mm Hubzahl / number of strokes 1/min Zapfenloch im Stößel / ram hole mm Ausladung / throat depth mm Stößelverstellung / ram adjustment mm Stößelfläche / ram surface mm 108x90 135x x x x230 Tisch / table mm 270x x x x x650 Durchfallloch im Tisch / hole in table mm Motorleistung / motor power kw 0,75 1,5 2,2 3 4 Länge / length mm Breite / width mm Höhe / height mm Gewicht / weight kg CDCS 600 P 800 P 1250 P 1500 P 2500 P Presskraft / capacity ton Einbauhöhe / daylight mm Hubverstellung / stroke adjustment mm 4/102 4/102 5/110 5/110 4/140 Hubzahl / number of strokes 1/min Zapfenloch im Stößel / ram hole mm Ausladung / throat depth mm Stößelverstellung / ram adjustment mm Stößelfläche / ram surface mm 425x x x x x600 Tisch / table mm 750x x x x x850 Durchfallloch im Tisch / hole in table mm Motorleistung / motor power kw 7,5 7, ,5 Länge / length mm Breite / width mm Höhe / height mm Gewicht / weight kg
4 C-Ständer Exzenterpressen mit 8-fach Stößelführung Mod. CDCS 800 P81 Standardausführung CDCS P81 Modelle standard equipment CDCS P81 models 8-fach Stößelführung Manuelle Hubverstellung Manuelle Stößelverstellung Antrieb über Getriebe Elektro-pneumatische Kupplungs-Bremskombination Fester Tisch Einzel- und Dauerhub Mechanische Überlastsicherung (bei Modellen bis 130 ton) Hydraulische Überlastsicherung (bei Modellen ab 160 ton) Manuelle Zentralschmierung (bei Modellen bis 80 ton) Automatische Zentralschmierung (bei Modellen ab 110 ton) Automatische Kreislaufschmierung (bei Modellen ab 160 ton) Maschine und Ausrüstung entsprechend den CE-Vorschriften 8-fold ram guide manual stroke adjustment manual ram adjustment gear driven electro-pneumatic clutch break combination fixed table single and continous stroke mechanical overload safety device (models up to 130 ton) hydraulic overload safety device (models off 160 ton) manual central lubrication (models up to 80 ton) automatic central lubrication (models off 110 ton) automatic closed loop lubrication (models off 160 ton) machine and equipment in conformity with CE-regulations Optionen CDCS P81 Modelle optional equipment CDCS P81 models Automatische Hubverstellung Motorische Stößelverstellung (bei Modellen ab 40 ton) Aufspannplatte Lichtschranke Geschwindigkeitsregulierung Vibrationspads Ziehkissen Hydraulische Überlastsicherung (für Modelle unter 160 ton) Automatische Zentalschmierung (für Modelle unter 110 ton) automatic stroke adjustment motorized ram adjustment (models off 40 ton) bolster plate light guard speed control vibration pads die cushion hydraulic overload safety device (for models under 160 ton) automatic central lubrication (for models under 110 ton) 4
5 C-frame eccentric press with 8-fold ram guide CDCS 401 P P P P P P P P81 Presskraft / capacity ton Einbauhöhe / daylight mm Hubverstellung / stroke adjustment mm 5/75 4/102 4/102 14/114 5/110 5/110 4/140 4/140 Hubzahl / number of strokes 1/min Zapfenloch im Stößel / ram hole mm Ausladung / throat depth mm Stößelverstellung / ram adjustment mm Stößelfläche / ram surface mm 420x x x x x x x x600 Tisch / table mm 630x x x x x x x x850 Durchfallloch im Tisch / hole in table mm Motorleistung / motor power kw 4 7,5 7,5 7, ,5 Länge / length mm Breite / width mm Höhe / height mm Gewicht / weight kg
6 D-Ständer Hochgeschwindigkeits-Exzenterpressen mit 8-fach Stößelführung Mod. CDCS P81/L Standardausführung CDCS P81/L Modelle standard equipment CDCS P81/L models 8-fach Stößelführung Fixer Hub Manuelle Stößelverstellung Antrieb über Getriebe Elektro-pneumatische Kupplungs-Bremskombination Fester Tisch Einzel- und Dauerhub Geschwindigkeitsregulierung Hydraulische Überlastsicherung Automatische Kreislaufschmierung Maschine und Ausrüstung entsprechend den CE-Vorschriften 8-fold ram guide fixed stroke manual ram adjustment gear driven electro-pneumatic clutch break combination fixed table single and continous stroke speed control hydraulic overload safety device automatic closed loop lubrication machine and equipment in conformity with CE-regulations Optionen CDCS P81/L Modelle optional equipment CDCS P81/L models Motorische Stößelverstellung (bei Modellen ab 40 ton) Aufspannplatte Lichtschranke Vibrationspads motorized ram adjustment (models off 40 ton) bolster plate light guard vibration pads 6
7 D-frame highspeed-eccentric press with 8-fold ram guide CDCS 251 P81/L 401 P81/L 601 P81/L 801 P81/L 1001 P81/L Presskraft / capacity ton Einbauhöhe / daylight mm Hub / stroke mm Hubzahl / number of strokes 1/min Zapfenloch im Stößel / ram hole mm Ausladung / throat depth mm Stößelverstellung / ram adjustment mm Stößelfläche / ram surface mm 360x x x x x295 Tisch / table mm 560x x x x x540 Durchfallloch im Tisch / hole in table mm Motorleistung / motor power kw 4 5,5 7, Länge / length mm Breite / width mm Höhe / height mm Gewicht / weight kg
8 H-Ständer Exzenterpressen mit 8-fach Stößelführung und einzel/doppel Pleuel Mod. CDCH 3000 P Mod. CDCH 4000 P Standardausführung CDCH P / CDCH P Modelle standard equipment CDCH P / CDCH P models Einzel Pleuel (bei CDCH P Modellen) Doppel Pleuel (bei CDCH P Modellen) 8-fach Stößelführung Fixer Hub Motorische Stößelverstellung Antrieb über Getriebe Elektro-pneumatische Kupplungs-Bremskombination Fester Tisch Einzel- und Dauerhub Lichtschranke Hydraulische Überlastsicherung Automatische Kreislaufschmierung Maschine und Ausrüstung entsprechend den CE-Vorschriften single connection rod (CDCH P models) double connection rod (CDCH P models) 8-fold ram guide fixed stroke motorized ram adjustment gear driven electro-pneumatic clutch break combination fixed table single and continous stroke light guard hydraulic overload safety device automatic closed loop lubrication machine and equipment in conformity with CE-regulations Optionen CDCH P / CDCH P Modelle optional equipment CDCH P / CDCH P models Automatische Hubverstellung Werkzeug Schnellwechselsystem Geschwindigkeitsregulierung Vibrationspads Ziehkissen Dämpfungssystem automatic stroke adjustment quick tool changin system speed control vibration pads die cushion damping system 8
9 H-frame eccentric press with 8-fold ram guide and single/double connection rod CDCH 1600 P 2000 P 3000 P 4000 P Presskraft / capacity ton Einbauhöhe / daylight mm Hub / stroke mm Hubzahl / number of strokes 1/min Stößelverstellung / ram adjustment mm Anzahl der Pleuel / number of connecting rods mm Tisch / table mm 1.200x x x x1.000 Motorleistung / motor power kw 15 18, Abmessungen und Gewichtsdaten auf Anfrage / dimensions and weight data on request CDCH 1600 P 2000 P 3000 P 4000 P 5000 P 6300 P 8000 P P Presskraft / capacity ton Einbauhöhe / daylight mm Hub / stroke mm Hubzahl / number of strokes Stößelverstellung / ram adjustment Anzahl der Pleuel / number of connecting rods 1/min mm mm Tisch / table mm 1.800x x x x x x x x1.200 Motorleistung / motor power kw 15 18, Abmessungen und Gewichtsdaten auf Anfrage / dimensions and weight data on request 9
10 H-Ständer Kniehebelpressen mit 8-fach Stößelführung Standardausführung CDCK PMU 2 standard equipment CDCK PMU 2 Zwei Kniehebelgelenke 8-fach Stößelführung Fixer Hub Motorische Stößelverstellung Antrieb über Getriebe Elektro-pneumatische Kupplungs-Bremskombination Fester Tisch Einzel- und Dauerhub Geschwindigkeitsregulierung Lichtschranke Hydraulische Überlastsicherung Automatische Kreislaufschmierung Maschine und Ausrüstung entsprechend den CE-Vorschriften two knuckle joints 8-fold ram guide fixed stroke motorized ram adjustment gear driven electro-pneumatic clutch break combination fixed table single and continous stroke speed control light guard hydraulic overload safety device automatic closed loop lubrication machine and equipment in conformity with CE-regulations Optionen CDCK PMU 2 optional equipment CDCK PMU 2 Werkzeug Schnellwechselsystem Vibrationspads Ziehkissen quick tool changin system vibration pads die cushion 10
11 H-frame knuckle Joint Press with 8-fold ram guide CDCK 2000 PMU PMU PMU PMU PMU PMU 2 Presskraft / capacity ton Einbauhöhe / daylight mm Hub / stroke mm Hubzahl / number of strokes Stößelverstellung / ram adjustment 1/min mm Tisch / table mm 1.500x x x x x x1.400 Motorleistung / motor power kw Abmessungen und Gewichtsdaten auf Anfrage / dimensions and weight data on request 11
12 V TÄGLICH AKTUALISIERTE LAGERLISTE UNTER Vertrauen Sie auf über 65 Jahre Erfahrung! Die Firma HESSE+CO wurde 1947 als Hersteller von Blechbearbeitungsmaschinen gegründet. Seit 1980 sind wir auf den Handel mit neuen sowie gebrauchten Blechbearbeitungs- und Werkzeugmaschinen spezialisiert. Wir haben ständig etwa 300 Maschinen in unserer m² großen Ausstellungshalle, die nur 20 Minuten vom internationalen Flughafen Wien entfernt ist. Trust in more than 65 years of experience! HESSE+CO was established in 1947 as a manufacturer of sheet metal working machines. Since 1980 we are specialized in dealing with new and second hand sheet metal processing machines and machine tools. We always have approximately 300 machines available in our m² showroom, which is located only 20 minutes from the Vienna International Airport, waiting for your inspection. Ihr Partner seit 1947 HESSE+CO Maschinenfabrik GmbH Industriezentrum NÖ-Süd Straße 4 - Objekt 8 A-2351 Wiener Neudorf AUSTRIA Technische Änderungen, Irrtum und Druckfehler vorbehalten. Gültig bis auf Widerruf. Tel.: +43/2236/ Fax: +43/2236/ office@hesse-maschinen.com
max. Lochdurchmesser max. Längsloch
PRO-60 HP PRO-110 HP TRAGBARER HYDRAULIK-LOCHSTANZER Eigenschaften und Vorteile: Double Action - voll automatischer Stanzprozess und Rückführung Stanzbereich Lochdurchmesser bis 27 mm moderne Konstruktion
Mehrhyd. 3-roll bending machine HESSE H3R-HS
V121213 Hyd. 3-Walzen Blecheinrollmaschine HESSE H3R-HS hyd. 3-roll bending machine HESSE H3R-HS Hyd. Antrieb der Oberwalze und Seitenwalzen, hyd. Zustellung der Seitenwalzen hyd. drive of the upper roll
Mehrmot./hyd. 4-roll bending machine HESSE H4R HMS
Mot./Hyd. 4-Walzen Blecheinrollmaschine HESSE H4R HMS mot./hyd. 4-roll bending machine HESSE H4R HMS Mot./Hyd. Antrieb der Ober- und Unterwalze, hyd. Zustellung der Seitenwalzen mot./hyd. drive of the
Mehrhyd. 4-roll bending machine HESSE H4R HS
Hyd. 4-Walzen Blecheinrollmaschine HESSE H4R HS hyd. 4-roll bending machine HESSE H4R HS Hyd. Antrieb der Oberwalze, hyd. Zustellung der Seitenwalzen hyd. drive of the upper roll, hyd. adjustment of the
MehrHydraulische Schwenkbiegemaschinen HESSE. hydraulic folding machines HESSE
Hydraulische Schwenkbiegemaschinen HESSE hydraulic folding machines HESSE HESSE / -K Mod. 3145 mit optionaler Schneider Touchscreen Steuerung / mod. 3145 with optional Schneider touchscreen control -K
MehrBM-16 ANFASMASCHINE. Fasenradius R2, R3, R4 oder R5. Max. Fasenbreite 16 mm. Rohranfasen am AD. Gewölbtes Anfasen von Kanten
BM-16 ANFASMASCHINE Mitglied im DVS Deutscher Verband für Schweißen und verwandte Verfahren e. V. Tragbare und handliche Anfasmaschine zum Anfasen von Platten- und Rohrkanten aus Stahl, Aluminiumlegierungen,
MehrThe Winning Force MS SERIE. Mechanische Tafelscheren. Erhöhte Geschwindigkeit Perfect Effektivität Performanz
The Winning Force MS SERIE Mechanische Tafelscheren Erhöhte Geschwindigkeit Perfect Effektivität Performanz 1 The Winning Force Als Gesamtlieferant für die Blechbearbeitungsindustrie mit nahezu 60 Jahren
MehrDEU EXZENTER PRESSEN EINSTANDER PRESSEN DOPPELSTAENDERPRESSE EIN PLEUL DOPPELSTAENDERPRESSE MIT ZWEI PLEUEL
DEU EXZENTER PRESSEN EINSTANDER PRESSEN DOPPELSTAENDERPRESSE EIN PLEUL DOPPELSTAENDERPRESSE MIT ZWEI PLEUEL EINSTANDER PRESSEN EINSTANDER PRESSEN EINSTANDER PRESSEN STRUKTUR Konstruktion und Prüfung der
MehrHYDRAULISCHE PRESSEN HYDRAULIC PRESSES
HYDRAULISCHE PRESSEN HYDRAULIC PRESSES Angebotsnuer 0049 Im Angebot Pressen 1.WEINGARTEN Type. Doppelständer- Vierpunkt- Stanzpresse mit Blechhalter. Technische Daten: Gesamtpresskraft 10000 KN Stößelkraft
MehrMachine Brochure. MÜLLER WEINGARTEN Blanking line. https://youtu.be/1_gz2wxmmo
Machine Brochure MÜLLER WEINGARTEN Blanking line https://youtu.be/1_gz2wxmmo0 7-40263 Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße 2 74172 Neckarsulm GERMANY +49 (0) 7132 99936 0 www.goedicke.com
MehrAuszug aus der netzbetriebenen Multimotor-Serie
Drehantrieb MU 010 Max. zentrische Belastung 1 kg bei 1 bis 5 UpM. Je größer das Objekt und je schneller der Motor desto geringer die mögliche Belastung. Rotating Motor MU 010 Max. centric load 1 kg /
Mehrhydraulic conv. press brakes EASYBEND
V081013 Hydraulische konv. Abkantpressen EASYBEND hydraulic conv. press brakes EASYBEND Die preiswerte konventionelle Maschine für Einzelbüge und Kleinserien. The budget conventionel machine for single
MehrProduktinformation 201407_182PNdeen
Produktinformation 201407_182PNdeen Deutsch Seite 1-2 English page 3 4 Produkt Information POWER LIFT HL 2.35 NT DT Fahrzeuge und Transporter werden immer schwerer, von der Automobilindustrie und den Autohäusern
MehrPlasmastromquelle. Geräteauswahl
Plasmastromquelle Die PlasmaCut-Anlagen werden standardmäßig mit Plasmastromquellen der Powermax-Serie von Hypertherm ausgerüstet. Diese bieten im Bereich der Druckluft betriebenen Stromquellen eine hervorragende
MehrCircular Knitting Machine
MOD. RR3-Z-R -1s-10 MOD. RR3-Z-R -109-10s MOD. RR3-Z-R J-109-4s/8s MOD. RR3-Z-R Machine Specifications mit stehendem Schlossmantel und rotierendem Zylinder Einsatzgebiete: Diese Maschine wird zur Herstellung
MehrUnsere Leistungen im Überblick
Unsere Leistungen im Überblick Beschläge für Hobel- und Werkbänke Workbench vises Arbeitstische und Werkbänke Worktables and workbenches Reinigungsgeräte Cleaning equipment Anlagen für den Holzleimbau
MehrECOFIT XTRA PFLEGEBETT / CARE BED
PFLEGEBETT / CARE BED ECOFIT XTRA Sehr stabil für höchste Ansprüche. Hoher Komfort und Funktionalität gepaart mit einem attraktiven Preisleistungsverhältnis. Besonders geeignet für Anbieter im Gesundheitswesen,
MehrBESCHREIBUNG FLÜGEL UND RAHMENPRESSE Fabr. CASOLIN Typ EURO 3500 X 2400
Seite 1 von 5 BESCHREIBUNG FLÜGEL UND RAHMENPRESSE Fabr. CASOLIN Typ EURO 3500 X 2400 Mit Option Konterprofile bei Einzelteilfertigung Seite 2 von 5 HYDRAULISCHE RAHMENPRESSE FÜR FENSTER UND TÜREN MOD.
MehrLuftfahrtmaterial direkt ab Lager!
KUK-Aerospace Luftfahrtmaterial direkt ab Lager! KUK-Aerospace ist die umfassende Auswahl an Luftfahrtmaterialien direkt am Lager KASTENS & KNAUER in Lilienthal bei Bremen. Wir bieten Aluminium als Platten,
Mehrfabrikneue CNC Vertikal-Dreh- und Fräsmaschine der Baureihe VMT mit CNC-Steuerung Siemens 828 Basic T und C-Achse Abbildung VMT 800 mit Sonderzubehör
ANGEBOT fabrikneue CNC Vertikal-Dreh- und Fräsmaschine der Baureihe VMT mit CNC-Steuerung Siemens 828 Basic T und C-Achse Abbildung VMT 800 mit Sonderzubehör 1/10 Verkaufspreise fabrikneue CNC Vertikal-Dreh-
MehrI-Energieversorgung I-Power Supply
F Seite 1 page 1 1) Pneumatisch a. Stellantriebe mit Membrane finden ihren Einsatz da, wo kleine Stellkräfte ausreichen. Der pneumatische Stellantrieb ist direkt in Kompaktbauweise mit dem Stellventil
MehrQualitäts-Schneidsysteme für höchste Anforderungen
Qualitäts-Schneidsysteme für höchste Anforderungen Made in Germany Tomphecke 51 41169 Moenchengladbach Germany Phone 0049 (0) 21 61-99 42-0 Fax 0049 (0) 21 61-99 42 14 info@sato.de www.sato.de 09/2012
MehrLochstanzen Punching Tools
Lochstanzen Punching Tools Technische Änderungen bleiben vorbehalten. Druck 20. Oktober 2017 Katalog 5 Seite 1 von 11 18 Volt Akku-Lochstanzen Cordless Hole Punching Machines Serie EG-P o Leistungsstarker
MehrHydraulische CNC Abkantpressen HESSE APF hydraulic CNC press brakes HESSE APF
Hydraulische CNC Abkantpressen HESSE APF hydraulic CNC press brakes HESSE APF Mod. APF 30120 HESSE APF Die Einzigartige Kombination aus Leistung und Bedienfreundlichkeit macht die APF zu einer extrem wirtschaftlichen
Mehrmetallschleifen metal sanding
metallschleifen metal sanding Einband-Schleifmaschinen Single belt grinding machines LZG-m-i Zum Schleifen, Mattieren und Polieren von Stahl mit einer Schleifbandbreite von 150 mm. For grinding, matting
MehrSOLAMAGIC S1 1400W 2000W
SOLAMAGIC S1 1400W 2000W SOLAMAGIC S1 1400W CT Ausführung version mit Kippschalter with toggle switch 1x 1400 Watt watts Wand, Decke, Stativ wall, ceiling, tripod 230 V / IP 44 1x SOLAMAGIC S1 mit Bügel
MehrKurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen
Kurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen QuickStart Guide to read a transponder with a scemtec TT reader and software UniDemo Voraussetzung: - PC mit der
Mehrhebö Profilbearbeitung
hebö Profilbearbeitung hebö section processing Hydraulische Profilstahlscheren und Ringbiegemaschinen Hydraulic steelworkers and bending machines 1 hebö HKM 60 / hebö HKM 40 Hydraulische Profilstahlschere
MehrRetraktionssystem Frankfurt Frankfurt Retraction System
Retraktionssystem Frankfurt Frankfurt Retraction System Retraktionssystem Frankfurt Frankfurt Retraction System Das Retraktionssystem Frankfurt ist ein universelles Mini Retraktionssystem für die Struma-
MehrESR. The Dynamic Solution. ESR Pollmeier GmbH www.esr-pollmeier.de
Standard-Planetengetriebe, Übersetzungen i = 3 bis 512 Nenn-Abtriebsdrehmoment 5 bis 800 Nm, Spitze bis 1280 Nm Verdrehspiel
MehrCONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP
ANLEITUNGEN // INSTRUCTIONS CONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP BEDIENUNGSANLEITUNG // INSTRUCTION MANUAL MONTAGEANLEITUNG // ASSEMBLY INSTRUCTION MONTAGEANLEITUNG // ASSEMBLY INSTRUCTION KOPPLUNG
MehrHydraulische Bremsen
Hydraulische Bremsen HYDRAULISCHE BREMSEN Anwendung Hydraulische Leistungsbremsen sind als Belastungseinheiten in Motorprüfständen eingesetzt. Sie decken einen großen Leistungs-und Drehmomentbereich von
MehrMax. camera weight up to 5,0 kg / 11 lbs Max. Kameragewicht bis zu 5,0 kg. Max. camera weight up to 5,0 kg / 11 lbs Max. Kameragewicht bis zu 5,0 kg
Body supported Körpergestützt G-FORCE Overview Übersicht 6 G-FORCE Dynomic Page/Seite 8-9 G-FORCE PRO Page/Seite 10-11 G-FORCE PRO CN Page/Seite 12-13 G-FORCE Master Page/Seite 14-15 G-FORCE Advanced Page/Seite
MehrBåndsave til metal Bandsäge - Metall Band saws for metal 125VB
202 125VB K Enkel og hurtig klingeskift Einfacher und schneller Sägeblattwechsel Quick and easy change of saw blade K Vinkelindstilling fra 0-60 º Winkeleinstellung von 0-60 º Angle adjustment 0-60º K
MehrMesser und Lochscheiben Knives and Plates
Messer und Lochscheiben Knives and Plates Quality is the difference Seit 1920 Since 1920 Quality is the difference Lumbeck & Wolter Qualität, kontinuierlicher Service und stetige Weiterentwicklung zeichnen
MehrStadler. Betriebsurlaub vom 18.01.2016 05.02.2016. Faszination in Edelstahl. Sehr geehrte Geschäftsfreunde,
Stadler Johann Metallbau Am Vogelherd 1A 93090 Bach an der Donau Frengkofen Stadler Faszination in Edelstahl Planung Konstruktion Herstellung Handel Entsorgung von Gebrauchten 11.01.2016 Sehr geehrte Geschäftsfreunde,
MehrSCM GROUP spa - Via Emilia, 71-47900 Rimini (RN) - Italy Tel. +39/0541/700111 - Fax +39/0541/700181 - www.scmgroup.com - E-mail: scm@scmgroup.
Rev n. 00-03/2006 - Acanto Comunicazione - Sat SCM GROUP spa - Via Emilia, 71-47900 Rimini (RN) - Italy Tel. +39/0541/700111 - Fax +39/0541/700181 - www.scmgroup.com - E-mail: scm@scmgroup.com English
MehrHyd. CNC Abkantpressen HESSE by DURMA PBF hyd. CNC press brakes HESSE by DURMA PBF
Hyd. CNC Abkantpressen HESSE by DURMA PBF hyd. CNC press brakes HESSE by DURMA PBF Mod. PBF 30120 HESSE by DURMA PBF Die Einzigartige Kombination aus Leistung und Bedienfreundlichkeit macht die PBF zu
Mehrhydraulic CNC press brakes HESSE CNC
Hydraulische CNC Abkantpressen HESSE CNC hydraulic CNC press brakes HESSE CNC plus 3D plus 3D Mod. CNC plus 3D 60400 HESSE CNC plus 3D HESSE CNC plus 3D Eine moderne Touch Steuerung, Hinteranschlagsgeschwindigkeiten
MehrStanz-, Press- und Ziehteile Punched Pressed and Drawn parts
Stanz-, Press- und Ziehteile Punched Pressed and Drawn parts Produkt Portfolio. Product portfolio Automotive / Sicherheit Produktion von Sicherheitsteilen und kompletten Baugruppen (Nieten, Schweißen,
MehrDESKTOP CNC Portal Maschine PM0302. Technische Spezifikation
Technische Spezifikation Allgemeines Die DESKTOP-PM0302 3-Achsen- minicnc-maschine mit Schrittmotorantrieb ist eine Werkzeugmaschine speziell für Designer, Modellbauer, CNC-Ausbildung und Kleinserienfertigung.
MehrWalter Buchmayr Ges.m.b.H.
Seite 1/10 Chapter Description Page 1 Advantages 3 2 Performance description 4 3 Settings 5 4 Options 6 5 Technical data 7 6 Pictures 8 http://members.aon.at/buchmayrgmbh e-mail: walter.buchmayr.gmbh@aon.at
MehrPrecision meets Motion. . Produktportfolio. Statische und angetriebene Werkzeugsysteme für CNC-Drehmaschinen
. Produktportfolio Statische und angetriebene Werkzeugsysteme für CNC-Drehmaschinen Static and driven tool systems for CNC-lathes . Produktportfolio Statische und angetriebene Werkzeugsysteme in Standard-
MehrBNC 2 Servo-Produktionssystem
Servo-Produktionssystem Optimieren Sie Ihre Produktion Verlegen Sie Ihre Massenfertigung von Band- und Drahtteilen auf das neue servogesteuerte Produktionssystem BNC 2. Die Maschine und alle Bearbeitungsaggregate
MehrKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MehrPCB manuell generieren
60 PCB manuell generieren Folgende Ränder müssen gezeichnet bzw. importiert werden: 1. Mechanischer Rand der Platine (Mechanical 1 Layer) 2. Elektrischer Rand der Platine (Keep Out Layer) für Signal-Layers
MehrProduktvielfalt Variety of Products
Eine Qualitätsmarke der Barthelmess Group A quality brand from the Barthelmess Group Marke Brand Qualität Quality Produktvielfalt Variety of Products Fertigung Production BARCANA ist mehr als nur ein künstlicher
MehrHARTNAGEL Etikettiermaschinen für Verpackungsbecher und Automation. Etikettierautomat - EMR 8-200 / EMR 8-400
Etikettierautomat - EMR 8-200 / EMR 8-400 Die Firma Hartnagel, begann vor über 15 Jahren den ersten Etikettierautomaten zu entwickeln und zu bauen. Geleitet von der Idee, das hinsichtlich der Produktführung
MehrData-S EASY VERSTREUTE ÜBERWACHUNG DER NOTBELEUCHTUNG
Abmessungen Dimensions 252x462x99 IP40 Data-S EASY VERSTREUTE ÜBERWACHUNG DER NOTBELEUCHTUNG Das System überwacht korrekten Betrieb der in kleinen und mittelgroßen Objekten der öffentlichen Nutzung installierten
MehrDie Welt der Verpackung. Umreifen Strapping. humboldt QUALITY PACKAGING
Umreifen OB-360 Automatische Banderoliermaschine für Folien- und Papierband automatic taping machine for film- and papertape HU-300 Halbautomatische Paletten Umreifungsmaschine mit fixer Bandführungszunge
MehrSchüco Fenster AWS 90.SI + als PASK Schüco Window AWS 90.SI +, tilt/slide
Schüco Fenster AWS 90.SI + als PASK Schüco Window AWS 90.SI +, tilt/slide Schüco Fenster AWS 90.SI + als PASK Schüco Window AWS 90.SI +, tilt/slide Schüco 271 Parallel-Abstell-Schiebe-Kippsystem Tilt/slide
MehrReadme-USB DIGSI V 4.82
DIGSI V 4.82 Sehr geehrter Kunde, der USB-Treiber für SIPROTEC-Geräte erlaubt Ihnen, mit den SIPROTEC Geräten 7SJ80/7SK80 über USB zu kommunizieren. Zur Installation oder Aktualisierung des USB-Treibers
MehrWindows Server 2012 R2 Essentials & Hyper-V
erklärt: Windows Server 2012 R2 Essentials & Hyper-V Windows Server 2012 R2 Essentials bietet gegenüber der Vorgängerversion die Möglichkeit, mit den Boardmitteln den Windows Server 2012 R2 Essentials
MehrÜbersicht Prüfvorrichtungen
Übersicht en Reproduzierbare Qualität PRÄZISION. Für die Brennersysteme: Power Joint Power Clutch Frontpull (micromig ) Wire Select Dual Wire 2.0 PlasmaTIG Document no.: DOC0137DE Revision: sks1211.de.2.b.bp
MehrAttenuator and Distribution System Zehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrDatenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
MehrDreh- und Schwenktische Rotary Tables MORE VALUE FOR YOUR MACHINE.
Dreh- und Schwenktische Rotary Tables MORE VALUE FOR YOUR MACHINE. KENNDATEN DREH- UND SCHWENKTISCHE ROTARY TABLES MAIN FEATURES SPEED LOAD RIGIDITY BRAKING POWER SAFETY BRAKE 0 HSD TECHNOLOGY up to ±2,5
MehrLänge Mittel-/Untertisch length of middle/bottom table. Gesamtlänge / length over all
Teleskopgabel, Typ TZ bis 1000 kg hochfeste Stahlprofile mit Präzisions- Rollenführung Motoren wahlweise in Gleichstrom-, Wechselstromoder Hydromotoren Sicherheitskupplung und Sensor für Kettenrißüberwachung
MehrICE-Trade Wickel- & Lagerbock
Passage de la Poste 3 2 B 7700 Mouscron Belgium ICE-Trade Wickel- & Lagerbock Die ICE-Trade Wickelböcke werden Kundenspezifisch (Breite, Durchmesser, Drehmoment, Gewicht) gebaut. Unsere Standardwickelmaschinen
MehrHydraulische CNC Abkantpressen HESSE CNC plus 3D hydraulic CNC press brakes HESSE CNC plus 3D
Hydraulische CNC Abkantpressen HESSE CNC plus 3D hydraulic CNC press brakes HESSE CNC plus 3D Mod. CNC plus 3D 30135 HESSE CNC plus 3D Eine moderne Touch Steuerung, Hinteranschlagsgeschwindigkeiten von
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
MehrPartner Paket Plus. Ihr persönlicher Gutschein von LINZ GAS Vertrieb und Viessmann
Partner Paket Plus Ihr persönlicher Gutschein von LINZ GAS Vertrieb und Viessmann Sonnige Aussichten mit Erdgas und Solarenergie Mit Erdgas genießen Sie warmes Wasser und wohlige Wärme auf Knopfdruck.
MehrEEX Kundeninformation 2007-09-05
EEX Eurex Release 10.0: Dokumentation Windows Server 2003 auf Workstations; Windows Server 2003 Service Pack 2: Information bezüglich Support Sehr geehrte Handelsteilnehmer, Im Rahmen von Eurex Release
Mehr4G Mill. 4G Mill FRÄSER CARBIDE. - High Speed Cutting for Pre-Hardened Steels up to HRc55. Being the best through innovation
CABIDE Being the best through innovation G G FÄSE High Speed Cutting for PreHardened up to Hc HighSpeedBearbeitung (HSC) von vorvergüteten Stählen bis Hc SELECTION GUIDE ITEM MODEL DESCIPTION MIN SIZE
MehrGILDEMEISTER CTX beta 500/800 V6 CTX beta 800/1250
Produktinformation Product Information Statische Werkzeughalter, Angetriebene Werkzeuge Static Tool Holders, Driven Tools 2015-06-30 GILDEMEISTER CTX beta 500/800 V6 CTX beta 800/1250 Trifix Inhaltsverzeichnis
MehrEuropean Aviation Safety Agency
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Number : P.502 Issue : 01 Date : 09 March 2010 Type : GEFA-Flug GmbH Models Helix H50F List of effective Pages: Page 1 2 3 4 5 Issue 1 1
MehrZehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrFördereinheiten für Platinen. Transport devices for blanks
Fördereinheiten für Platinen Transport devices for blanks In Platinenschneidwerkzeugen müssen abhängig von der Streifengestaltung (Mehrfachverschachtelung) zusätzliche Komponenten zum Ausbringen der Platine
MehrSchwerlast-Linear-Systeme Heavy load-linear-systems Linearachsen Linear axis
Schwerlast-Linear-Systeme Heavy load-linear-systems Linearachsen Linear axis WINKEL RLE-Roboter-Achsen Stahlprofilbauweise mit Kugelumlaufführungen High Dynamic, High Precision-Ausführung mit Servomotoren
MehrBundesamt für Wehrtechnik und Beschaffung
BWB (German Federal Procurement Office) Bundesamt für Department Land Kampf (Land Armament) Project Group K41: Artillery, Mortars and Ammunition K 41 - Mortar Lightweight 120mm Mortar WIESEL 2, air transportable
MehrZehnder ComfoWell 320
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with locking slides for
MehrWeihnachtsund Neujahrs- Angebote
e e im Dezember 2014 und Januar 2015 Entdecken Sie unsere speziellen Weihnachts- und e Vom 5. Dezember 2014 bis zum 16.Januar 2015 gibt es junge gebrauchte TRUMPF Maschinen direkt vom Hersteller zu besonders
Mehrtransfertische ohne antrieb transfer tables without drive
101 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 11 transfertische ohne antrieb transfer tables without drive > Transfertisch TOA 01-06 mit Einfachsegmenten // Transfertisch TOA 08-15
MehrCABLE TESTER. Manual DN-14003
CABLE TESTER Manual DN-14003 Note: Please read and learn safety instructions before use or maintain the equipment This cable tester can t test any electrified product. 9V reduplicated battery is used in
Mehr13. Schwimmbadabdecksysteme manuell und automatisch
Hauptkatalog 13. Schwimmbadabdecksysteme manuell und automatisch Schwimmbäder * Whirlpools * Saunas Infrarotkabinen * Dampfbäder * Solarien Preise und weitere Artikel auf Anfrage! Firma Ing. K. Binder
MehrWerkzeugspanner für automatische Werkzeugspannung von Werkzeugen mit Kegelaufnahme und mit Anzugsbolzen
Werkzeugspanner für automatische Werkzeugspannung von Werkzeugen mit Kegelaufnahme und mit Anzugsbolzen Power draw bar for automatic tool clamping of tools with taper mounting and with draw-in bolts Der
MehrKRUPP Produktübersicht / Product Range
KRUPP Produktübersicht / Product Range VibroDrilling / VibroDrill Bohrhämmer / Drifters Drehwerke / Rotary Drives Doppelkopf-Bohranlagen / Double Rotary Heads Über uns / About us Die ThyssenKrupp Tiefbautechnik
MehrSignal Processing LWL-Sender/Empfänger mit Outdoor-Box für die störsichere Übertragung von Rechtecksignalen
LWL-Sender/Empfänger mit Outdoor-Box für die störsichere Übertragung von Rechtecksignalen LWL Sender/Empfänger mit Outdoor-Box Merkmale LWL-SBR, Übertragungsweiten bis zu 1500 m Wandlung üblicher Rechtecksignale
MehrTechnische Daten Technical Data
Technische Daten Technical Data Die ELEKTRA Baureihe Seite ELEKTRA Produktkombination 2 ELEKTRA evolution 30 4 ELEKTRA evolution 50 5 ELEKTRA evolution 75 6 ELEKTRA evolution 110 7 ELEKTRA evolution 110
Mehr1 Stk. SCM SUPERSET NT Profilfräsautomat
1 Stk. SCM SUPERSET NT Profilfräsautomat ALLGEMEINE MERKMALE Maschinenbett Maschinenbett aus massivem Stahl mit großzügig bemessenen Verstärkungsrippen und tragender Hohlkörperkonstruktion. Die Schwingungen
MehrNEU RENAULT MASTER AL-KO HIGH-TECH-KOMPONENTEN FÜR MASSGESCHNEIDERTE NUTZFAHRZEUGE MODERNE TRANSPORTER FAHREN ERFOLGREICH AUF AL-KO AMC-CHASSIS
MODERNE TRANSPORTER FAHREN ERFOLGREICH AUF AL-KO AMC-CHASSIS NEU RENAULT MASTER AL-KO HIGH-TECH-KOMPONENTEN FÜR MASSGESCHNEIDERTE NUTZFAHRZEUGE AL-KO AMC-CHASSIS-Technik Ihr Plus MEHR ZULADUNG Durch das
MehrOPUS. Spannzylinder Clamping Cylinders
OPUS OPUS SCHUNK Voll- und Hohlspannzylinder sind die optimale Ergänzung für alle Drehfutter und komplettieren das Gesamtpaket für Ihre Drehmaschine. Ob mit oder ohne Durchgangsbohrung, für kleine oder
Mehr4G Mill. 4G Mill FRÄSER. CARBIDE Being the best through innovation. - High Speed Cutting for Pre-Hardened Steels up to HRc55
CABIDE Being the best through innovation G G FÄSE High Speed Cutting for PreHardened up to Hc HighSpeedBearbeitung (HSC) von vorvergüteten Stählen bis Hc SELECTION GUIDE SIZE ITEM MODEL DESCIPTION PAGE
MehrInstrument table HT-020. description/ technical data. table height min.: 650mm table height max.: 1320mm tabletop Multiplex beech: 700x 460mm.
Wagner&Guder UG(mbH) & Co.KG HT-020 Multiplex beech: 700x 460mm table weight: 40kg 6x multiple socket 230VAC Schuko under table with wheels, two of them with brakes Wagner&Guder UG(mbH) & Co.KG HT-100
MehrNapfpressensysteme aus einer Hand
Napfpressensysteme aus einer Hand Forming the Future Mit uns sichern Sie Ihren Wettbewerbsvorteil Willkommen bei Schuler Pressen und Automationssysteme des Technologie- und Weltmarktführers Schuler sind
MehrManual Positioning Systems
M anue l l e Po si tio n iers y s t e me Manual Positioning Systems Linearversteller LT...4-4 linear translation stages LT Kreuztische MT...4-5 XY translation stages MT Hubtische HT...4-6 vertical translation
Mehrmiditech 4merge 4-fach MIDI Merger mit :
miditech 4merge 4-fach MIDI Merger mit : 4 x MIDI Input Port, 4 LEDs für MIDI In Signale 1 x MIDI Output Port MIDI USB Port, auch für USB Power Adapter Power LED und LOGO LEDs Hochwertiges Aluminium Gehäuse
MehrLIFTKET electric chain hoists worldwide in use.
LIFTKET electric chain hoists worldwide in use. Production program» Electric chain hoists 125 kg 6300 kg» Electric chain hoists 4000 kg 25000 kg» Electric chain hoists for special requirements» Electric
MehrPlasmaschneidmaschine HESSE PL/PL-C plasma cutting machine HESSE PL/PL-C
Plasmaschneidmaschine HESSE PL/ plasma cutting machine HESSE PL/ Mod. 1530 HESSE Die hochleistungs Plasma-Schneideanlagen HESSE sind geeignet zum Trennen von elektrisch leitendem Normal- und Edelstahl
MehrÜbersicht Aktenvernichter SECURITY. 20% Rabatt. gültig vom
SECURITY Übersicht Aktenvernichter 0% Rabatt gültig vom. November 05 bis 3. Januar 06 Schreibtisch-Aktenvernichter 0 45 65 70 Modell 0 45 45 CC 45 CC 65 65 CC 65 CC 70 70 CC 70 CC Arbeitsbreite, mm 0 0
MehrV-Turn 410. V-Turn 410. Präzisions-Drehmaschinen. inkl. 3-Achs-Positionsanzeige und integr. SpindeldrehzahlAnzeige, komplett montiert
Präzisions-Drehmaschinen inkl. 3-Achs-Positionsanzeige und integr. SpindeldrehzahlAnzeige, komplett montiert Spitzenweite 1000 bzw. 1500 mm max. Drehdurchmesser über Bett 410 mm stufenlos regelbare Spindeldrehzahl
MehrLuftfahrt-Bundesamt. JAR-E Geräte-Kennblatt ( 4 LuftVZO) 19. Juli 2002 ARRIEL 2S1 3 24.11.2000 ARRIEL 2C 1 22.09.1997 ARRIEL 2B 1 30.12.
19. Juli 2002 Muster: ARRIEL 2 Baureihen Ausgabe Datum ARRIEL 2S1 3 24.11.2000 ARRIEL 2C 1 22.09.1997 ARRIEL 2B 1 30.12.1997 ARRIEL 2C1 2 24.11.2000 ARRIEL 2B1 1 24.11.2000 ARRIEL 2C2 1 19.07.2002 I. Allgemeines:
MehrNew Endpoint Product &Bundles. Ab Ende Juli
New Endpoint Product &Bundles Ab Ende Juli Warumist das für Sie wichtig? Benefits Wir haben gefragt, Sie haben geantwortet Wir verlieren Projekte in unteren Segmenten Es gibt nicht genug attraktive Auswahlmöglichkeiten
MehrFarblaser-Geräte von Brother
Farblaser-Geräte von Brother At your Side BROTHER FARBLASER-DRUCKER IM ÜBERBLICK Modell HL-3140CW HL-3150CDW HL-3170CDW HL-L8250CDN HL-L8350CDW HL-L9200CDWT UVP in Deutschland¹ / Österreich¹ 179,00 / 179,00
MehrHeavy Duty Forklift SCP320C1. Quotation
Heavy Duty Forklift SCP320C1 32t Lifting Capacity Volvo TAD760VE Engine Dana Clark Transmission Kessler Drive Axle SANY Steering Axle Air conditioning system High durability mast structure Engine Volvo
Mehrhydraulic swing beam guillotine shears HESSE SBT
V081013 Hydraulische Schwingschnittscheren HESSE SBT hydraulic swing beam guillotine shears HESSE SBT Schwere Produktionsmaschinen für den anspruchsvollen Einsatz Heavy production machines for demanding
MehrPneu. Linearantriebe mit externer Gleitführung Baureihe PLS
Pneu. Linearantriebe mit externer Gleitführung Baureihe PLS Linearführung mit externer Gleitführung im Profil Linear guide with external gliding carriage on the profil Typ PLS/...zum Anbau an Linearzylinder
MehrUSBASIC SAFETY IN NUMBERS
USBASIC SAFETY IN NUMBERS #1.Current Normalisation Ropes Courses and Ropes Course Elements can conform to one or more of the following European Norms: -EN 362 Carabiner Norm -EN 795B Connector Norm -EN
MehrPI 55.1 Werkzeuge für CNC-Drehmaschinen
PI 55.1 Werkzeuge für CNC-Drehmaschinen Porte-outils pour CNC-Tournage ist in Bearbeitung Ab Lager Meier Protech oder kurzfristig ab Werk lieferbar. En stock ou départ usine dans les meilleurs délais.
MehrGamme connectique: Ratioplast Electronics
Gamme connectique: Ratioplast Electronics Produktübersicht / Product Overview Empfohlenes Leiterplatten-Layout/ Recommended P.C.B Layout 1,0 mm SMT-Stiftleisten, SMT-Buchsenleisten / SMT-Pinheader, SMT-Female
Mehr