NX-HDMI-W60 Manual
[ 3 ] NX-HDMI-W60 Herzlichen Dank für den Kauf eines Contrik Produktes. Das Set bestehend aus Sender und Empfänger überträgt Signale zuverlässig, unkomprimiert und verzögerungsfrei bei einer maximalen Auflösung von 1080p/60Hz. Es ist besonders gut geeignet für Installationen in Büros oder jeweils in Bereichen in denen keine Kabel verlegt werden können. Das System arbeitet auf 60 GHz und kann eine Distanz von 25 Meter überbrücken. Kurzanleitung 1. Verbinden Sie den Sender des NX-HDMI-W60 mit einem HDMI 1.4 Kabel mit Ihrer Quelle. (Computer, Blu-ray Player, AV Receiver, ) 2. Verbinden Sie den Empfänger des NX-HDMI-W60 mit einem HDMI 1.4 Kabel mit dem Bildwiedergabegerät (Beamer, Display) 3. Schliessen Sie die Geräte an einer Stromquelle an. Für die Leistungsversorgung können Sie die mitgelieferten USB-Kabel verwenden. Diese können an jedem USB-Ausgang (>500 ma) angeschlossen werden. 4. Optional können Sie den Sender und Empfänger auch mit dem separat erhältlichen Netzteil IRT-PowerKit AVT- 11 verwenden. 5. Das System startet auf und wird sich automatisch paaren. Sollten die Geräte sich nicht automatisch finden, drücken Sie die Taste Key für 4 Sek. 6. Ausrichten: Richten Sie den Sender und den Empfänger aus, so dass sie sich gegenüber stehen. Achten Sie darauf, dass kein zu grosser horizontaler und/oder vertikaler Versatz der Position entsteht. Durch einen zu grossen horizontalen und/oder vertikalen Versatz kann die Übertragung negativ beeinträchtig werden. (Abb. 1 ganz hinten.)
LED Status LED leuchtet nicht: LED blinkt kurz: LED blinkt schnell: LED leuchtet dauerhaft: Das System befindet sich im Schlaf-Modus oder verfügt über keine Leistungsversorgung. Das System befindet sich im Pairing-Modus und sucht den TX/RX. Das System ist gepaart, hat aber kein Nutzsignal (HDMI) anliegen. Audio/Video werden übertragen. KEY-Taste KEY-Taste 4 sek. gedrückt halten um das System erneut zu paaren (pairing). KEY-Taste 10 sek. gedrückt halten um das System zu resetten. Technische Spezifikationen Standard: WirelessHD1.1 Übertragungsfrequenz: 60 GHzw Bandbreite: 7 Gbps Distanz: 25 m Auflösungen: Maximum bis 1080P@60HZ Anschlüsse: HDMI Type A Power: USB Micro B, 5V 1A Leistungsaufnahme: RX max. 2.5W, TX max. 2.5W Abmessungen: 84.5 x 49 x 25.5 mm Gewicht: RX 80 g, TX 80 g Betriebstemperatur: 0-45 C Lieferumfang 1 x Sender TX 1 x Empfänger RX 2 x Micro-USB Kabel 2 m für die Stromversorgung 2 x HDMI (1.4) 0.75 m (NRV-070-090-0075) für die Audio- Video-Verbindung. Optional erhältlich Netzteil IRT-PowerKit AVT-11 Manual NX-HDMI-W60 [ 4 ]
Unterstützte Videoformate Index Resolution Refresh Rate (Hz) Color Depth (8, 10,12bits) 3D 1 640 x 480p (VGA) 60 RGB: 8-bit only N 2 720 x 480p 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 3 1280x 720p 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 4 1920x 1080i 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 5 720(1440)x 80i 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 6 1920x 1080p 60 RGB,Y444,Y422:,8-bit only N 7 720 x 576p 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 8 1280x 720p 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 9 1920x 1080i 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 10 720(1440)x 576i 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 11 1920x 1080p 50 RGB,Y444,Y422:,8-bit only N 12 1920x 1080p 24 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 13 1280x 720p 120 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 14 1920x 1080p 48 RGB,Y444,Y422:,8-bit only N 15 1920x 1080p 24 RGB,Y444,Y422:,8-bit only Frame Packing 16 1280x 720p 60 RGB,Y444,Y422:, 8-bit only Frame Packing 17 1280x 720p 50 RGB,Y444,Y422:, 8-bit only Frame Packing 18 1280x 720p 60 RGB,Y444,Y422:, 8-bit only Top to Bottom 19 1920x 1080i 60 RGB,Y444,Y422:,8-bit only Side by Side 20 1280x720p 50 RGB,Y444,Y422:,8-bit only Top to Bottom 21 1920x 1080i 50 RGB,Y444,Y422:,8-bit only Side by Side 22 1920x 1080p 24 RGB,Y444,Y422:,8-bit only Top to Bottom 23 1280x 720p 60 RGB,Y444,Y422:,8-bit only Side by Side 24 1280x 720p 50 RGB,Y444,Y422:,8-bit only Side by Side 27 1024x 768 (XGA) 60 RGB: 8-bit only N 28 1280x 1024 (SXGA) 60 RGB: 8-bit only N 29 1680x 1050 (WSXGA+) 60 RGB: 8-bit only N 30 1920x 1200 (WUXGA) 60 RGB: 8-bit only N 31 800 x 600 (SVGA) 60 RGB: 8-bit only N 32 848 x 480 (WVGA) 60 RGB: 8-bit only N
Unterstütze Audioformate Format fs[khz] Ch Speaker HDMI fs[khz] Comment LPCM 32 2 LPCM 44.1 2 LPCM 48 2 LPCM 88.2 2 LPCM 96 2 LPCM 176.4 2 LPCM 192 2 LPCM 32 6 LPCM 44.1 6 LPCM 48 6 LPCM 88.2 6 LPCM 96 6 LPCM 32 8 LPCM 44.1 8 LPCM 48 8 Manual NX-HDMI-W60 [ 6 ]
NX-HDMI-W60 Thank you for purchasing a Contrik product. The set consisting of a transmitter and a receiver transmits signals reliably, uncompressed and without delay in a maximum resolution of 1080p/60Hz. It is very suitable for installations in offices or wherever cables cannot be run. The system operates on 60 GHz and bridges distances up to 25 meters. Quick Instruction 1. Connect the transmitter of the NX-HDMI-W60 with a HDMI 1.4 cable with your source. (Computer, Blu-ray Player, AV Receiver, ). 2. Connect the receiver of the NX-HDMI-W60 with a HDMI 1.4 cable with the image display device (Beamer, Display). 3. Connect the devices to a power source. For power supply you can also use the provided USB cables which can be connected to any USB output (>500 ma). As an option the sender and receiver can also be used with the power supply IRT-PowerKit AVT-11, which is available separately. 4. The system boots and pairs automatically. If the devices do not pair automatically, press the button key for approx. 4 seconds. 5. Adjustment: Align the transmitter and receiver facing each other. Pay good attention to not create neither a horizontal nor a vertical offset of the position because this would negatively affect the transmission. (Abb. 1 at the end of the manual). [ 7 ]
LED Status LED is not on: LED blinking short: LED blinking fast: LED is permenently on: The system is either in sleep mode or has no power supply. The system is in pairing mode and is searching the TX/RX. The system is paired but has no applied wanted signal (HDMI). Audio/video are transmitted. KEY button Press the KEY button for approx. 4 sec. to restart the pairing of the system again. Press the KEY button for approx. 10 sec. to reset the system. Technical Specifications Standard: WirelessHD1.1 Transmission frequency: 60 GHzw Band width: 7 Gbps Distance: 25 m Resolutions: Maximum up to 1080P@60HZ Connections: HDMI Type A Power: USB Micro B, 5V 1A Power consumption: RX max. 2.5W, TX max. 2.5W Dimensions: 84.5 x 49 x 25.5 mm Weight: RX 80 g, TX 80 g Operating temperature: 0-45 C Included in delivery 1 x transmittertx 1 x receiver RX 2 x Micro-USB cable 2 m for power supply 2 x HDMI (1.4) 0.75 m (NRV-070-090-0075) for audiovideo connection Available as an option: Power supply IRT-PowerKit AVT-11 Manual NX-HDMI-W60 [ 8 ]
Supported Video Formats Index Resolution Refresh Rate (Hz) Color Depth (8, 10,12bits) 3D 1 640 x 480p (VGA) 60 RGB: 8-bit only N 2 720 x 480p 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 3 1280x 720p 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 4 1920x 1080i 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 5 720(1440)x 80i 60 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 6 1920x 1080p 60 RGB,Y444,Y422:,8-bit only N 7 720 x 576p 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 8 1280x 720p 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 9 1920x 1080i 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 10 720(1440)x 576i 50 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 11 1920x 1080p 50 RGB,Y444,Y422:,8-bit only N 12 1920x 1080p 24 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 13 1280x 720p 120 RGB: 8/10/12,Y444:8/10/12, Y422:8-bit only N 14 1920x 1080p 48 RGB,Y444,Y422:,8-bit only N 15 1920x 1080p 24 RGB,Y444,Y422:,8-bit only Frame Packing 16 1280x 720p 60 RGB,Y444,Y422:, 8-bit only Frame Packing 17 1280x 720p 50 RGB,Y444,Y422:, 8-bit only Frame Packing 18 1280x 720p 60 RGB,Y444,Y422:, 8-bit only Top to Bottom 19 1920x 1080i 60 RGB,Y444,Y422:,8-bit only Side by Side 20 1280x720p 50 RGB,Y444,Y422:,8-bit only Top to Bottom 21 1920x 1080i 50 RGB,Y444,Y422:,8-bit only Side by Side 22 1920x 1080p 24 RGB,Y444,Y422:,8-bit only Top to Bottom 23 1280x 720p 60 RGB,Y444,Y422:,8-bit only Side by Side 24 1280x 720p 50 RGB,Y444,Y422:,8-bit only Side by Side 27 1024x 768 (XGA) 60 RGB: 8-bit only N 28 1280x 1024 (SXGA) 60 RGB: 8-bit only N 29 1680x 1050 (WSXGA+) 60 RGB: 8-bit only N 30 1920x 1200 (WUXGA) 60 RGB: 8-bit only N 31 800 x 600 (SVGA) 60 RGB: 8-bit only N 32 848 x 480 (WVGA) 60 RGB: 8-bit only N
Supported Audio Formats Format fs[khz] Ch Speaker HDMI fs[khz] Comment LPCM 32 2 LPCM 44.1 2 LPCM 48 2 LPCM 88.2 2 LPCM 96 2 LPCM 176.4 2 LPCM 192 2 LPCM 32 6 LPCM 44.1 6 LPCM 48 6 LPCM 88.2 6 LPCM 96 6 LPCM 32 8 LPCM 44.1 8 LPCM 48 8 Manual NX-HDMI-W60 [ 10 ]
[ 11 ] Abb. 1
Manual NX-HDMI-W60 [ 12 ]