SOLUTIONS. for shopping malls and the trade sector. create comfort. control energy. System solutions for building management and building automation

Transkript

1 System solutions for building management and building automation create comfort. control energy. create comfort. control energy. 1

2 GFR Your expert partner for the implementation of your goals: Ideal presentation of merchandise Highest customer satisfaction Transparent operational costs You are having a good day, solved problem or you just want to lay back and relax. There are many good reasons for going shopping and visiting malls. Turn your shopping centre into the most convenient one in your region and to the number one for your customers. Automation systems by GFR make an efficient contribution to the presentation of your merchandise, customer satisfaction and transparent operational costs for the building. DIGICONTROL Solutions for building automation and system integration WEBVISION 5 The new generation of building management software WEBENCON Certified energy data management Source: Ideal presentation of merchandise Higher turnover The presentation of merchandise at the point of sale is an essential measure for promotional activities which has a direct impact on the turnover. It is your goal to stimulate the customer s purchasing impulses and to create a need for the exhibited merchandise. This will be successful if the framework conditions are met: A positive, bright and open environment with fresh air and a perfect presentation of your goods. Increased energy efficiency Lower operating costs A good turnover is not everything. A shopping mall must be capable of offering more than just the best shopping experience. The operators seek ultimate safety and highest flexibility with maximum energy efficiency and lowest costs. Transparent operating costs for buildings Trouble-free invoicing The energy data management system WEBENCON displays all consumption data of the building and tenants concisely and provides maximum transparency for energy flows and costs. WEBENCON is certified for the application for energy management systems in accordance with ISO and energy audits pursuant to DIN Green image More Visitors Boost your energy efficiency and minimise your operating costs by using state-of-the-art GFR building technology and benefit from your resulting green image. The efficiency of your shopping center does not only give you a good feeling but will also be viewed positively by the public. Requirements, standards and guidelines Our automation systems meet the highest requirements for the energy efficiency of buildings specified by EPBD, EnEV and certification systems like DGNB, LEED or BREEAM. for DIN EN ISO 16484, VDI 3814 and VDI 3813 which describe the functions of building and room automation. for DIN EN up to the highest energy efficiency class A. 2 Solutions Issue March 2016 / Rev. 0 create comfort. control energy. 3

3 Focus on Tenants and operators Sophisticated atmosphere and optimum conditions for the tenant It is very common for large-scale retail enterprises to present their goods in shop-in-shop systems which are run by brand manufacturers who will accept no compromises for the presentation of their merchandise and the comfort for customers. Sophisticated tenants request an optimum environment. Automation systems by GFR offer highest comfort with maximum energy efficiency. Flexibility and sustainability A building system in the trade sector has to be flexible regarding changes in the utilisation of areas, area sizes, branch structures, opening hours and customer frequencies. GFR automation systems offer maximum flexibility with transparency by means of integrating supraregional branch networks. Transparent and comprehensible operating costs and building data Time and time again, they are the stumbling block in the field of commercial rental law: The incidental costs. A substantial portion of the incidental rental costs account for the operation of the building, the power, heating and cold. It can only be billed correctly if comprehensible data are gathered and maintained. WEBENCON records consumption data and enables automatic evaluations and proportional calculations of incidental rental costs. Reliable building technology and safe operation Modern building automation networks, server solutions and intelligent automation software are the basis of our innovative automation systems. DIGICONTROL and WEBVISION 5 offer maximum operational, data and IT safety, especially for buildings with increased safety requirements. 4 Solutions create comfort. control energy. 5

4 Focus on Customers and visitors Best shopping experience for visitors Shopping is one of the favourite free-time activities of people. The desire to get a different look pushes the shoppers to go shopping in malls and department stores. The potential buyer prefers staying at places where there are no restrictions, like dim light or bad and unpleasantly tempered air. DIGICONTROL systems respond to changing occupation densities and ensure the right temperature and sufficient fresh air. Promotional effects If you are a shop operator and want to achieve the desired promotional effect, you ought to focus primarily on the needs of your customers. Investigations in different product areas have proved that more than 50% of shoppers belong to the segment of experience-oriented buyers. People make purchasing decisions on basis of the expected experience. Therefore the customers appreciate event zones which create strong feelings and where they enjoy a feel-good atmosphere. DIGICONTROL records climatic conditions inside and outdoors and adjusts the air conditioning and illumination in a way that an optimum shopping atmosphere is created. 6 Solutions create comfort. control energy. 7

5 Intelligent software reduces your energy costs and CO2 emissions Save 15 to 70% energy via Economizing The DIGICONTROL Economizer takes advantage of new control strategies for air-conditioning plants which are based on patented optimisation algorithms and consequently utilises an enormous energy-saving potential. It has the European patent number Save up to 60% of energy via Smart room ventilation Save up to 20% of energy via Automatic presence control The automatic presence detection and timing ensure presence-dependent and occupancydependent air conditioning and room lighting by means of presence detectors and schedulers. The DIGICONTROL RoomTimePlanner calculates the times for an optimised air conditioning of rooms on basis of the actual room occupancy in accordance with the entries in the appointment calendars. Save up to 30% of energy by means of Smart room climate control The individual room control of the room automation enables an individually adjustable climate and the optimum operation of each individual room with regard to energy consumption. Window monitoring detects open windows and increases the energy efficiency by means of automatically switching-off of the heat and cold supply. The weather forecast provides local weather data and enables the adaption of operational parameters before and not after every weather change. Communication with the energy centre The calculated heat or cold demand of all rooms in the primary control results in a load-dependent energy generation and lower energy consumption compared to the classic weather-compensated control. Only as much energy will be generated as actually required. The demand-based ventilation provides the right amount of air at the right time. The proportional pressure control optimises the fan speed and reduces the power consumption tremendously. The free night cooling uses the cool outdoor air for room ventilation. By doing so, the comfort is increased and cooling energy will be saved. The summer compensation enhances the comfort by creating a room climate adapted to the outdoor temperature which will save large amounts of cooling energy. Save up to 40% energy via Intelligent automatic light control The constant lighting control ensures a constant level of illumination as a composition of daylight and artificial light. This creates a positive atmosphere and reduces the power consumption. The daylight-dependent lighting automatic does not only switch the lighting on if a particular brightness is achieved but also off. Save up to 30% energy by means of Automatic shading control Slat adjustment means that the slat angle is adapted cyclically to the incident angle of the solar radiation which results in enhanced comfort and optimum light conditions. Therefore you can save tremendous amounts of electrical energy. Automatic temperature control stands for the utilisation or shading of solar radiation by means of solar protection control. This leads to heating and cooling energy savings. 8 Solutions create comfort. control energy. 9

6 Transparent Building data and costs WEBVISION 5 - The new generation of building management software About 80% of total costs arising within the life cycle of a building account for its operation. The share of all buildings in the world-wide primary energy consumption is at 40% per year. Thus, there is a huge potential to contribute to the economy and responsible use of resources by effectively operating buildings. WEBVISION 5 takes up this challenge. WEBVISION 5 offers state-of-the-art handling by providing optimum comfort and intuitive operation from the system overview down to the data point. This builds trust, operating the system is a pleasure and users are not afraid of utilising the software. WEBENCON - Energy data management in accordance with ISO The functional diversity of the energy management software is an important criterion for assessing an energy data management system. It shall be flexible with regard to migration, changes in the use of area and its size, branch structures, opening hours and customer frequencies. Furthermore, especially in trade, it has to be able to integrate national branch networks in a system. Different climatic conditions, categories and sizes of branches with varying features must be taken into consideration as well. WEBENCON is web-based and client capable and enables automatic evaluations and proportional utility billing. It considers branch-specific issues and meets the specific requirements of trade. DASHBOARD All building data and energy data displayed at a glance WEBVISION 5 Sankey diagrams Responsive Design DIGICONTROL DEGREEN sets standards in integrated room automation WEBENCON Controlling 10 Solutions create comfort. control energy. 11

7 Buildings, customers and operators Leipziger Platz 12 - Mall of Berlin Construction of a new shopping mall Year: The new shopping mall is located on Leipziger Platz near the Potsdamer Platz. The two hectare large area provides an urban mix of shopping, restaurants, entertainment, hotel, offices and apartments m² total area 270 Shops Largest gastronomy area in Berlin 170 Apartments m² Hotel 1000 Parking spaces Ruhr-Park Bochum Reconstruction of shopping centre Year: Having a renting space of 125,000 m² (71,500 m² sales area) and 140 shops, the Ruhr-Park shopping centre belongs to the largest shopping centres in Germany. Economic factors: Enhanced energy utilisation via cogeneration plants Saving energy by using LED lighting Heat recovery in ventilation plants Efficient control by means of night-time and weekend reductions Rathaus-Galerie Leverkusen Construction of a new shopping mall Year: 2010 The city of Leverkusen could boast of an attractive adventure and shopping promenade with about 22,000 m² of selling space on three storeys. Welcoming visitors on the 440 meters long shopping arcade, are more than 120 specialised shops surrounded by restaurants, cafes and bars. Audi Centre Berlin, Adlershof Construction of flagship store Year: 2012 The 22,000 square meter large new flagship store of the Audi Centre Berlin is located on the edge of the technology park Adlershof near the future BER airport. The facility consists of a terminal with presentation areas for new cars, a centre for second hand cars which is made of glass and a new building where the new owners get their cars. The 31 meter high vehicle cylinder is a prestigious building where 20 twenty vehicles are presented behind glass until they are picked up. Designer Outlet Soltau Construction of a new shopping village Year: 2012 The designer outlet Soltau is a shopping village comprising 80 shops and frame-work houses with thatched roofs on 13,500 square metres. The designer outlet Soltau has a very special charm. 12 Solutions create comfort. control energy. 13

8 Take advantage of our expertise! GFR Gesellschaft fr Regelungstechnik und Energieeinsparung mbh Being one of the leading providers in the branch, we develop and sell innovative system solutions for building automation and energy management. We have been taking care of saving energy for more than 35 years. Our name is our commitment and our mission is more relevant than ever before. Buildings being automated by GFR are not only economically optimised but also reduce CO2 emissions for increased sustainability and a better future. 10 good reasons for GFR, DIGICONTROL and WEBVISION 5 1. GFR automates buildings and rooms in accordance with DIN EN (energy efficiency class A), EN and VDI By doing so, the energy-efficiency of buildings can be increased by 30% and more. 2. GFR offers building automation solutions from one source. If you cooperate with GFR, you will only require one point of contact for all questions on planning, implementation, optimisation and support of your subsidiary. 3. GFR manufactures quality products in Germany. 4. GFR has a staff of 260 highly-motivated employees and is a well- positioned mid-sized company. Take advantage of our fast decision-making, lean processes and fast response times. 5. GFR has an own production department for control cabinets. Your benefit: 100% quality and maximum flexibility during the construction phase. 6. GFR develops complete system solutions which are upward compatible. Take advantage of our expertise - today and in the future. 7. GFR has access to the engineering tool WEBPROJECT which ensures totally consistent planning, design and documentation. 8. If you decide for an automation systems of the trade mark DIGICONRTROL and the building management system WEBVISION5, you will invest in high-performance, expandable and future-proof building systems which will also fulfil the increasing requirements of tomorrow. 9. WEBVISION 5 sets new standards for the performance of buildings. The innovative solutions and services provide an optimum balance between efficiency and comfort. 10. DIGICONTROL supports you in your efforts to reduce the CO2 emissions tremendously and to run your building more efficiently. 14 Solutions create comfort. control energy. 15

9 Subsidiaries in Germany and Europe Region Mitte GFR Verl Company headquarters Kapellenweg 42 D Verl Tel.: / Subsidiary Hannover Wiedemannstraße 1 D Sarstedt Tel.: / Office Hannover Industrieweg 28a D Hannover Tel.: / Region HANSE Subsidiary Hamburg Alter Teichweg D Hamburg Tel.: / Region NORD-OST Subsidiary Berlin Friedrichshagener Str. 6b D Berlin Tel.: / Region MITTEL-DEUTSCHLAND Subsidiary Jena Rudolstädter Str. 41 D Jena Tel.: / Fax: / Office Dresden Louis-Braille-Str. 8 D Dresden Tel.: / Fax: / Region BAYERN Subsidiary Mnchen Adalperostraße 80 D Ismaning Tel.: / Fax: / Region SÜD-WEST Subsidiary Stuttgart Dornierstraße 4 D Sindelfingen Tel.: / Fax: / Region RHEIN-MAIN Subsidiary Frankfurt Gutleutstraße 322 D Frankfurt a.m. Tel.: / Region RHEIN-NORD Subsidiary Köln Olper Straße 113 D Overath-Steinenbrck Tel.: / Region RUHR-EMS Subsidiary Mnster Webereistraße 3 D Steinfurt Tel.: / Fax: / Office Nordhorn Kokenmhlenstraße 16 D Nordhorn Tel.: / Fax: / DIGICONTROL Benelux B.V. Watermanstraat 29a NL-AJ 7324 Apeldoorn Tel.: / Fax: / Subsidiary Czech Republic Vyskočilova 1326/5 CZ Praha 4 - Michle Tel.: +420 / GFR Austria Trapplstraße 8 A St. Georgen / St. Pölten Tel.: / Fax: / Presented by: DIGICONTROL und DIGI VISION are GFR trademarks for our products and services facebook.com/gfrmbh