Evidence of Performance

Transkript

1 Air permeability, Watertightness, Resistance to wind load, Operating forces, Mechanical properties, Mechanical durability, Impact resistance Expert Statement No PR01 (02) Product Designation Performance-relevant product details Object ift Rosenheim Robert Kolacny, Dipl.-Ing. (FH) Deputy Head of Testing Department Building Components Forster Profilsysteme AG Amriswilerstr Arbon Switzerland Single tilt and turn window Single tilt and turn casement door Double combined side-hung /turn tilt casement door with opening meeting stile Unico / Unico XS Material: Metal profile with thermal barrier Admitting further profiles Test specimen Representation Sash sizes (W x H) 1,340 mm x 1,376 mm 1,402 mm x 2,402 mm 2,538 mm x 1,480 mm EN EN EN EN EN EN EN Test Classification Resistance to wind load C5 / B5 C4 / B4 C4 / B4 Watertightness E A 8A Air permeability Operating forces Mechanical properties Mechanical durability Impact resistance Load-bearing capacity of safety devices Requirements fulfilled Rolf Schnitzler, Dipl.-Ing. (FH) Operating Product Officer Building Components Basis EN :2006+A1:2010 Test standard/s: EN 1026: EN 1027: EN : EN 12211: EN 14608: EN 14609: EN 13049:2003 EN 1191: Expert statement PR01 (A de-02) dated Equivalent national versions (e. g. DIN EN) Instructions for use The manufacturer is allowed to use the results obtained for preparing a Declaration of Performance in accordance with the Construction Products Regulation 305/2011/EC. Observe the specifications set out by the applicable product standard. Validity The data and results given refer solely to the tested and described specimen. Classification remains valid as long as the product and the above basis remain unchanged. The results can be extrapolated under the manufacturer's own liability subject to observance of the relevant specifications set out by the applicable product standard. This test/ evaluation does not allow any statement to be made on any further characteristics regarding performance and quality of the construction presented; in particular the effects of weathering and ageing were not taken into account. Notes on publication The ift-guidance Sheet "Advertising with ift test documents" applies. The cover sheet can be used as an abstract. Contents The expert statement contains a total of 22 pages. 1 Order 2 Basis 3 Evaluation 4 Results and statement

2 Page 2 of 6 Forster Profilsysteme AG, 9320 Arbon, (Switzerland) 1 Order The company Forster Profilsysteme AG, 9320 Arbon (Switzerland), commissioned the ift Rosenheim to prepare an expert statement on the following: Extrapolation of the results contained in test reports /1 dated 26 June 2007, /2 dated 26 June 2007, /1 dated 16 February 2009 and /1 R1 dated 16 December 2009 under consideration of the deviations listed in table 1 given below. 2 Basis The evaluation was based on: Drawings submitted by the company Forster Profilsysteme AG, 9320 Arbon (Switzerland) Test report /1 dated 26 June 2007 Test report /2 dated 26 June 2007 Test report /1 dated 16 February 2009 Test report /1 R1 dated 16 December 2009

3 Page 3 of 6 Forster Profilsysteme AG, 9320 Arbon, (Switzerland) 3 Evaluation Table 1 Comparison of tested type with extrapolated type based on expert statement Comparison of tested type / characteristics / details Tested type Unico Extrapolated type Unico Unico XS see Annex

4 Page 4 of 6 Forster Profilsysteme AG, 9320 Arbon, (Switzerland) see Annex

5 Page 5 of 6 Forster Profilsysteme AG, 9320 Arbon, (Switzerland) see Annex 1 Deviation Evaluation Profiles The important design features are identical; in particular these are the gaskets, glazing and drainage. The main difference lies in the different profiles. System drawings have been submitted to the ift Rosenheim.

6 Page 6 of 6 Forster Profilsysteme AG, 9320 Arbon, (Switzerland) 4 Results and statement Based on the expert inspection and the test results given in test reports /1 dated 26 June 2007, /2 dated 26 June 2007, /1 dated 16 February 2009 and /1 R1 dated 16 December 2009 the modifications described in Clause 3 do not cause any deterioration of the characteristics of the test specimen attested b< the test reports. ift Rosenheim

7 Annex 1 Page 1 of 16

8 Annex 1 Page 2 of 16

9 Annex 1 Page 3 of 16

10 Annex 1 Page 4 of 16

11 Annex 1 Page 5 of 16

12 Annex 1 Page 6 of 16

13 Annex 1 Page 7 of 16

14 Annex 1 Page 8 of 16

15 Annex 1 Page 9 of 16

16 Annex 1 Page 10 of 16

17 Annex 1 Page 11 of 16

18 Annex 1 Page 12 of 16

19 Annex 1 Page 13 of 16

20 Annex 1 Page 14 of 16

21 Annex 1 Page 15 of 16

22 Annex 1 Page 16 of 16