Kuhnke Technical Data. Contact Details

Größe: px
Ab Seite anzeigen:

Download "Kuhnke Technical Data. Contact Details"

Transkript

1 Kuhnke Technical ata The following page(s) are extracted from multi-page Kuhnke product catalogues or ROs and any page number shown is relevant to the original document. The P sheets here may have been combined to provide technical information about the specific product(s) you have selected. ard copy product catalogues, and ROs have been published describing Kuhnke Pneumatics, Solenoids, Relays and lectronics; some divided into different books. list of current publications is available on this web site or from our sales offices. Some may be available for download, but as substantially larger files. ontact etails Kuhnke sales and service in orth merica llis/kuhnke ontrols 12 Lewis Street Unit -2, atontown J 0 US T: (00) 1 01 T: (2) 1 : (2) 1 1 mportant ote The information shown in these documents is for guidance only. o liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper application of the parts, assemblies or equipment described.

2 Technische aten ylinders rass ylinders Technical ata Technische aten: ruckbereich: Technical ata: Pressure range: 1 2 etriebsdruck (bar) ew - 2, - 2-1, - 1, - 1, - 1, - dw 2-1, , - 0, Operating pressure (bar) sa - da Umgebungstemperatur: Werkstoffe: ichtungen: Schmiermittel: * Zylinderrohr: s Kolbenstange: ri-stahl, korrosionsbeständig ämpfungsscheibe: lastomer, schlagfest Perbunan, ölbeständig Shell Tellus Öl oder gleichwertig ruckluft, gewartet* edium: ubbegrenzung: möglichst extern (optimale Lebensdauer) ubtoleranz: ederkraft: efestigung: max. + 1, ausgelegt für Rückbewegung des Kolbens, nicht für angekoppelte assen. lächenverhältnis der Kolben bei doppeltwirkenden Zylindern (bedingt durch bzug der Kolbenstangenquerschnitte) Zylinder : Zylinder, : Zylinder 1,, 2 : usführung "S": Schraubbefestigung am Zylinderdeckel der Kolbenstangenseite usführung "U": Universalbefestigung (Schraubbefestigung an beiden Zylinderdeckeln, Schwenkbefestigung) Sonderzylinder nach hren ngaben und Zylinder mit doppelseitiger Kolbenstange, sowie Zylinder mit Zwischen- und Überlängen bitten wir anzufragen. mbient temperature range: aterials: Seals: Lubricant: Operating medium: * cylinder tube: brass piston rod: ri-steel, corrosionresistant cushioning: plastic, impact-resistant Perbunan, oil-resistant Shell Tellus Oil or equivalent compressed air, prepared* Stroke limitation: if possible external (for optimum life) Stroke tolerance: max Spring force: ounting: designed for return of piston, not for any coupled mass. rea ratio of piston with double acting cylinders (due to reduction of piston rod sections) ylinders : ylinders, : ylinders 1,, 2 : version "S": threaded mounting on cylinder cover at piston rod end. version "U": universal mounting (threaded attachment on both cylinder covers, trunnion mounting) Please enquire about special cylinders to your own requirements and cylinders with double-sided piston rod as well as intermediate and extra long dimensions. * Siehe Technische nformation * See Technical nformation 2- Kuhnke Pneumatics atalogue

3 Technische aten ylinders rass ylinders Technical ata Statische Zylinderkennlinien* Kolbendurchmesser Static ylinder haracteristics* Piston iameter,0,0,00 2,0 2, 1,0 1,0 1,00 0,0 0, 1 2 bar bar bar 1 2 bar bar bar bar * ür das dynamische erhalten sind die Zylinderkennlinien mit dem aktor 0, - 0, zu multiplizieren. 1 = einfachwirkende Zylinder 2 = doppeltwirkende Zylinder im orlauf = doppeltwirkende Zylinder im Rücklauf * The cylinder characteristics are to be multiplied by a factor of for the dynamic behaviour. 1 = single acting cylinders 2 = double acting cylinders in forward stroke = double acting cylinders in return stroke 2- Kuhnke Pneumatics atalogue

4 infachwirkend ylinders rass ylinders Single cting iameter Zur Lösung von Prüf- und rbeitsvorgängen bei sehr beengten Raumverhältnissen (z.. Kontaktieren im Rastermaß von ) ist der iniatur-zylinder mit Kolbendurchmesser universell einzusetzen. uch bei kleinen bmessungen bietet dieser Zylinder die technischen orzüge der bewährten größeren iniatur-zylinderbaureihe. 0.0 The miniature cylinder with a piston diameter of is for general-purpose use in testing and other operations in very restricted spaces. ven with its small dimensions the cylinder offers the technical features of the proven series of larger miniature cylinders. Technische aten: ub: efestigung: Schraubbefestigung an Kolbenstangenseite ruckmittelanschluss: Schlauchtülle für Schlauch x 1* Technical ata: Stroke: ounting: threaded mounting at piston rod end Pneumatic connection: male fitting for x 1* tubing ø1,, ø SW, 2 2, estell-r. 0.0 Order o. 0.0 * ie zum nschluss notwendigen Schläuche und rmaturen siehe Katalog Pneumatik-Zubehör * See catalogue Pneumatic ccessories for tubing and fittings 2- Kuhnke Pneumatics atalogue

5 infachwirkend/usführung S... 2 ylinders rass ylinders Single cting/type S iameter... 2 Piston diameter SW SW L Piston diameter L aßtabelle imensions ub Stroke J K L O P Q R S T x 0, 2,,, 2 x 0, 2,, 0,, x 0,, 2, 2 x 0,,, x 0,, 0 x 0,,, estell-r. *) Order o. *) Standard-übe () Standard strokes (), 2, , <--- ax. ub/stroke 2 <--- ax. ub/stroke 0 max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl ew S ub f. * ntermediate strokes are optionally available up to xample: key for sa S stroke 2- Kuhnke Pneumatics atalogue

6 infachwirkend/usführung S... 2 ylinders rass ylinders Single cting/type S iameter... 2, 1,, 2 Piston diameter, 1,, 2 SW J K L aßtabelle ub Stroke, 2, 0 2, x1, 1x1, 1x1, 1x1, x1, x1, x1, 1, 1, 1, 1, 1, x1, x1,, 1 x1, x1,,, 1 1 x1,, / 1/ 1/ / 1/ / 1/ / 2 imensions J K L O P Q R S SW T 2,, 1 1,, 1, 1, 1,,,,, 1, 1, 1 1, , estell-r. *) Order o. *) Standard-übe () Standard strokes (), 2, , <- ax. ub/stroke 2, <- ax. ub/stroke <- ax. ub/stroke <- ax. ub/stroke 0 max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl ew S ub f. * ntermediate strokes are optionally available up to xample: key for sa S stroke 2- Kuhnke Pneumatics atalogue

7 infachwirkend/usführung U... 2 ylinders rass ylinders Single cting/type U iameter... 2 Piston diameter Piston diameter R R SW Q S L P O S L O P Q aßtabelle imensions ub Stroke J K L O P Q R S T U x 0, 2,, 2,,, 2, x 0,, 2 x 0, 2,,,,, 2, x 0,,, x 0,,,, 2, x 0,, 2 x 0,,,,, 2, x 0,,, x 0,,,, 2, x 0,, 0 x 0,,,, 2, x 0,, estell-r. *) Order o. *) Standard-übe () Standard strokes (), 2, , <- ax. ub/stroke 2 <- ax. ub/stroke 0 max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl ew U ub f. * ntermediate strokes are optionally available up to xample: key for sa U stroke 2-0 Kuhnke Pneumatics atalogue

8 U Zylinder infachwirkend/usführung U... 2 ylinders rass ylinders Single cting/type U iameter... 2, 1,, 2 Piston diameter, 1,, 2 T SW Q R J P S K O L aßtabelle ub Stroke, 2, 0 2, x1, 1x1, 1x1, 1x1, x1, x1, x1, 1, 1, 1, 1, 1, x1, x1,, 1 x1, x1,,, 1 1 x1,, / 1/ 1/ / 1/ / 1/ / 2 imensions J K L O P Q R S SW T U,,, 1,,, 0, 0, 1, 1 1, 1 1, 1, 2, 1,,,,,, 21,, 1 2, 1,, 1, 1 21,, x0, x0, x0, x0, x0, 1x1, 1x1, 1x1, 1x1, x1, x1, x1, x1, x1, x1, x1, 1 x1,,,,, 1, 1, 1, 1, 1, 1, 1, 1, estell-r. *) Order o. *) Standard-übe () Standard strokes (), 2, , <- ax. ub/stroke 2, <- ax. ub/stroke <- ax. ub/stroke <- ax. ub/stroke 0 max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl ew U ub f. * ntermediate strokes are optionally available up to xample: key for sa U stroke 2-1 Kuhnke Pneumatics atalogue

9 oppeltwirkend/usführung S... 2 ylinders rass ylinders ouble cting/type S iameter... 2 Piston diameter SW L+ub/L+stroke Piston diameter L+ub/L+stroke aßtabelle imensions J K L O P Q R S T U x0, 2,,,,, x0,,,,, estell-r. *) Order o. *) Standard-übe () Standard strokes (), <---- ax. ub/stroke 0 <---- ax. ub/stroke 10 max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl dw S ub f. * ntermediate strokes are optionally available up to xample: key for da S stroke 2-2 Kuhnke Pneumatics atalogue

10 Zylinder oppeltwirkend/usführung S... 2 ylinders rass ylinders ouble cting/type S iameter... 2, 1,, 2 Piston diameter, 1,, 2 SW J K L+ub/L+stroke aßtabelle imensions J K L O P Q R S SW T U 1, 1 1, 1 1x1, 1 1 x1, 21, 0 1/ 2,, 2 1 x1, / 2 1, estell-r. *) Order o. *) Standard-übe () Standard strokes (), ax. ub/stroke > ax. ub/stroke > ax. ub/stroke > ax. ub/stroke > max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl dw S ub f. * ntermediate strokes are optionally available up to xample: key for da S stroke 2- Kuhnke Pneumatics atalogue

11 oppeltwirkend/usführung U... 2 ylinders rass ylinders ouble cting/type U iameter... 2 Piston diameter Piston diameter R R Q S L+ub/L+stroke P O S L+ub/L+stroke O P Q aßtabelle Kolben x0, 2, x0,,,, imensions J K L O P Q R S T U,,,, 2, x0,,,,, 2, x0,, estell-r. *) Order o. *) Standard-übe () Standard strokes () Kolben, <----- ax. ub/stroke 0 <----- ax. ub/stroke 10 max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl dw U ub f. * ntermediate strokes are optionally available up to xample: key for da U stroke 2- Kuhnke Pneumatics atalogue

12 Zylinder oppeltwirkend/usführung U... 2 ylinders rass ylinders ouble cting/type U iameter... 2, 1,, 2 Piston diameter, 1,, 2 SW U T Q R J P S K O L+ub/L+stroke aßtabelle imensions 1, 1 1 J K L O P Q R S SW T U, x0, 1 1x1, 1,, 1 1x1,, 1 x1, 21, 0 1/ 2, 1,, 1 x1, 1, 2 1 x1, / 2 1 1,, 1 x1, 1, estell-r. *) Order o. *) Standard-übe () Standard strokes (), ax. ub/stroke > ---- ax. ub/stroke > ---- ax. ub/stroke > ---- ax. ub/stroke > max. ub lt. Tabelle. er ub geht in die estell- r. in den letzten drei Ziffern ein. eispiel: Kennzahl dw U ub f. * ntermediate strokes are optionally available up to xample: key for da U stroke 2- Kuhnke Pneumatics atalogue

13 Zubehör efestigungszubehör Zylinder ylinders rass ylinders ccessories ounting ccessories ylinders efestigungswinkel Werkstoffe: Stahl, verzinkt K ounting racket aterials: steel, galvanized est.-r. Order o..02, 1 2,,1, K 1,.02 1,,1,, * 2 1, 1,1 1,, , 1,1 1,, ,1,, ,1,, L Lagerbock Werkstoffe: Lagerbock: Stahl, verzinkt olzen: Stahl, phosphatiert Sicherung: ederstahl, phosphatiert L K Jø Trunnion aterials: trunnion: steel, galvanized bolt: steel, phosphorized safety: spring steel, phosphorized est.-r. Order o , u , 1 2,,2,1, 1 K L, 2,,,, abelkopf Werkstoffe: abelkopf: Stahl, verzinkt olzen: Stahl, phosphatiert,2, 2, 1 R levis aterials: clevis: steel, galvanized bolt: steel, phosphorized est.-r. Order o. 0.0 ** 1 2,,1 2.0 ** 1 2,,1.0 ** K L * Schwenklagerseite ** werden mit utter geliefert * Swivel-bearing side ** supplied with nut 2- Kuhnke Pneumatics atalogue

14 Zubehör efestigungszubehör Zylinder ylinders rass ylinders ccessories ounting ccessories ylinders Klehalter Werkstoffe: Stahl, verzinkt lamp aterials: steel, galvanized est.-r. Order o ,, 1,, 1,2,,,, 2,2,,, 1 1 K L * Schwenklagerseite * Swivel-bearing side 2- Kuhnke Pneumatics atalogue

Cylinders Brass Cylinders Technical Data. Zylindern. Messing-Zylinder Technische Daten. Technical Data: Pressure range:

Cylinders Brass Cylinders Technical Data. Zylindern. Messing-Zylinder Technische Daten. Technical Data: Pressure range: Technische aten ylinders rass ylinders Technical ata Technische aten: ruckbereich: Technical ata: Pressure range: 2 etriebsdruck () ew - 2, - 2 -, -, -, -, - dw 2 -, - - - 0, - 0, - 0.0.0 2 Operating pressure

Mehr

Messing-Zylinder Brass Cylinders

Messing-Zylinder Brass Cylinders rass ylinders 2- Kuhnke Pneumatics atalogue Technische aten ylinders rass ylinders Technical ata Technische aten: ruckbereich: Technical ata: Pressure range: 1 2 etriebsdruck (bar) ew - dw 2, - 2-2 - 1,

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details تاریخ 1/25/2 مجتمع فولاد ویان Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDOs and any page number shown is relevant to the original document.

Mehr

Zylinder ISO 6432 Cylinders ISO 6432

Zylinder ISO 6432 Cylinders ISO 6432 2-2 Kuhnke Pneumatics atalogue Technische aten Technical ata iese Zylinder entsprechen der Norm IN. ie usführung "S" ist nicht estandteil der Norm. Technische aten: ruckbereich: etriebsdruck (bar) ew 2-1.

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke echnical ata he following page(s) are extracted from multi-page Kuhnke product catalogues or OMs and any page number shown is relevant to the original document. he P sheets here may have been combined

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details uhnke echnical ata he followin pae(s) are extracted from multi-pae uhnke product cataloues or Rs and any pae number shown is relevant to the oriinal document. he P sheets here may have been combined to

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details uhnke echnical ata he followin pae(s) are extracted from multi-pae uhnke product cataloues or Rs and any pae number shown is relevant to the oriinal document. he P sheets here may have been combined to

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogs or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical ata The following page(s) are extracted from multi-page Kuhnke product catalogues or OMs and any page number shown is relevant to the original document. The P sheets here may have been

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Mechanisch betätigte Ventile Typ 46 NW 2 3/2-Wege Sitzventile Direktgesteuert

Mechanisch betätigte Ventile Typ 46 NW 2 3/2-Wege Sitzventile Direktgesteuert NW /-Wege Sitzventile mm Orifice /-Way Poppet Valves Dieses Sitzventil wurde speziell für den Einsatz in Schalttafeln und Betätigungseinrichtungen entwickelt. Durch seinen sechseckigen Grundkörper ist

Mehr

Mechanisch betätigte Ventile Typ 74 NW 2 3/2-Wege Sitzventile Direktgesteuert

Mechanisch betätigte Ventile Typ 74 NW 2 3/2-Wege Sitzventile Direktgesteuert NW /-Wege Sitzventile mm Orifice /-Way Poppet Valves Dieses Sitzventil wurde speziell für den Einsatz in Schalttafeln und Betätigungseinrichtungen entwickelt. verschiedene Betätigungsmöglichkeiten (Stößel,

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical ata The following page(s) are extracted from multi-page Kuhnke product catalogues or CROMs and any page number shown is relevant to the original document. The P sheets here may have been

Mehr

TECHNICAL DATA. Double-acting pneumatic telescopic cylinder

TECHNICAL DATA. Double-acting pneumatic telescopic cylinder TECHNISCHE DATEN TYP PDT Pneumatisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP PDT Double-acting pneumatic telescopic cylinder Pneumatisch doppeltwirkende Teleskopzylinder mit Endlagendämpfung,

Mehr

TECHNISCHE DATEN TYP HET TECHNICAL DATA. Single-acting hydraulic telescopic cylinder

TECHNISCHE DATEN TYP HET TECHNICAL DATA. Single-acting hydraulic telescopic cylinder TECHNISCHE DATEN TYP HET Hydraulisch einfachwirkender Teleskopzylinder TECHNICAL DATA TYP HET Single-acting hydraulic telescopic cylinder, bis zu 5 Stufen, Nenndruck max. 200 bar. Sonderausführung nach

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

TECHNISCHE DATEN TYP D TECHNICAL DATA

TECHNISCHE DATEN TYP D TECHNICAL DATA TECHNISCHE DATEN TYP D Hydraulik Differentialzylinder ohne Endlagendämpfung TECHNICAL DATA TYP D Hydraulic differential cylinder without end position damping Hydraulik Differentialzylinder ohne Endlagendämpfung,

Mehr

TECHNISCHE DATEN TYP PLU. Einfachwirkende auf Druck arbeitender Hydraulikzylinder, TECHNICAL DATA

TECHNISCHE DATEN TYP PLU. Einfachwirkende auf Druck arbeitender Hydraulikzylinder, TECHNICAL DATA TECHNISCHE DATEN TYP PLU Einfachwirkend auf Druck arbeitender Hydraulikzylinder TECHNICAL DATA TYP PLU Single-acting, pressure-operated hydraulic cylinder Einfachwirkende auf Druck arbeitender Hydraulikzylinder,

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

Baureihe 280 / 281 / 282 Type 280 / 281 / 282

Baureihe 280 / 281 / 282 Type 280 / 281 / 282 1 fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10

Mehr

pneumatische oder hydraulische präzisionsführungseinheiten pneumatic or hydraulic precision guide rails

pneumatische oder hydraulische präzisionsführungseinheiten pneumatic or hydraulic precision guide rails 91 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 10 pneumatische oder hydraulische präzisionsführungseinheiten pneumatic or hydraulic precision guide rails > präzisionsführungseinheit 23

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

c a Grundbezeichnung Kolben-Ø (mm)

c a Grundbezeichnung Kolben-Ø (mm) i H YD R A U LI KZYLI N D E R SPANNEN STANZEN BIEGEN BEWEGEN BLOCKZYLINDER DOPPELTWIRKEND TYP 600 MIT LÄNGSBOHRUNGEN g SW o c a d b h1 L1+Hub h2 L2 TYP 600 Betriebsdruck max. 500 bar. Grundbezeichnung

Mehr

ASP-1750 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR

ASP-1750 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR ASP-1750 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR LIFTING AND POSITIONING UNIT OPERATING PRESSURE 4-8 BAR TECHNISCHE DATEN ANWENDUNG Die Positioniereinheit ASP-1750 dient zum Indexieren und Positionieren

Mehr

3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled

3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50

Mehr

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich

Mehr

P-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series

P-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series 3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).

Mehr

SWC PENDELROLLENLAGER SWC SPHERICAL ROLLER BEARINGS

SWC PENDELROLLENLAGER SWC SPHERICAL ROLLER BEARINGS SWC PENDELROLLENLAGER SWC SPHERICAL ROLLER BEARINGS SWC bietet sowohl offene als auch abgedichtete Pendelrollenlager in verschiedenen Ausführungen an: Offene Ausführungen: o Zylindrische Bohrung mit Radialluft

Mehr

Evidence of Performance

Evidence of Performance Air permeability, Watertightness, Resistance to wind load, Operating forces, Mechanical properties, Mechanical durability, Impact resistance Expert Statement No. 15-002226-PR01 (02) Product Designation

Mehr

Snap-in switch for switches PSE, MSM and MCS 30

Snap-in switch for switches PSE, MSM and MCS 30 Product manual Snap-in switch for switches PSE, MSM and MCS 30 CONTENTS 1. PRODUCT DESCRIPTION 2. DATA AND DIMENSIONAL DRAWINGS 2.1. Technical Data 2.2. Dimensions of PSE with a Mounting Diameter 19 mm

Mehr

direktgesteuert direct acting

direktgesteuert direct acting 1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite

Mehr

Made in W-Germany. kv=0,12 l/min (NW 0,5) P2[bar] kv=0,45 l/min (DN 1) P2[bar] kv=0,70 l/min (NW 1,5) P2[bar]

Made in W-Germany. kv=0,12 l/min (NW 0,5) P2[bar] kv=0,45 l/min (DN 1) P2[bar] kv=0,70 l/min (NW 1,5) P2[bar] NW 0,//, /- und /-Wege Sitzventile 0.//. mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar z. B.: drei unterschiedliche Sockelformen (Standard-,

Mehr

ASP-1050 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR

ASP-1050 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR LIFTING AND POSITIONING UNIT OPERATING PRESSURE 4-8 BAR TECHNISCHE DATEN ANWENDUNG Die Positioniereinheit dient zum Indexieren und Positionieren von Werkstückträgern.

Mehr

P A max. 100bar A P max. 16bar

P A max. 100bar A P max. 16bar 1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design

Mehr

Tube Analyzer LogViewer 2.3

Tube Analyzer LogViewer 2.3 Tube Analyzer LogViewer 2.3 User Manual Stand: 25.9.2015 Seite 1 von 11 Name Company Date Designed by WKS 28.02.2013 1 st Checker 2 nd Checker Version history Version Author Changes Date 1.0 Created 19.06.2015

Mehr

VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL - USER GUIDE June 2016

VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL - USER GUIDE June 2016 Overview The Hamburg Süd VGM-Portal is an application which enables to submit VGM information directly to Hamburg Süd via our e-portal web page. You can choose to insert VGM information directly, or download

Mehr

Oil / Air cooler ASA-TT 11 12V/24V DC Öl /Luftkühler ASA-TT 11 12V/24V DC

Oil / Air cooler ASA-TT 11 12V/24V DC Öl /Luftkühler ASA-TT 11 12V/24V DC Oil / Air cooler ASATT 11 12V/24V DC Öl /Luftkühler ASATT 11 12V/24V DC Pressure drop at 30 cst Druckabfall bei 30 cst Specific Cooling Performance Spezifische Kühlleistung TECHNICAL DATA TECHNISCHE DATEN

Mehr

OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2.

OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2. Elektromotoren und Gerätebau Barleben GmbH OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2. Elektromotoren und Gerätebau Barleben GmbH 2 Inhaltsverzeichnis Page 1 Use 4 2 Design features 4 2.1 Test

Mehr

Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen

Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen Technical Report No. 028-71 30 95685-350 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen

Mehr

Mikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert

Mikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert NW 0,//,6/ /- und /-Wege Sitzventile 0.//.6/ mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar, z.b. drei unterschiedliche Sockelformen (Standard-,

Mehr

ASP-490 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR

ASP-490 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR ASP490 HUBPOSITIONIEREINHEIT BETRIEBSDRUCK 4 8 BAR LIFTING AND POSITIONING UNIT OPERATING PRESSURE 4 8 BAR TECHNISCHE DATEN ANWENDUNG Die Positioniereinheit ASP490 dient zum Indexieren und Positionieren

Mehr

STRATEGISCHES BETEILIGUNGSCONTROLLING BEI KOMMUNALEN UNTERNEHMEN DER FFENTLICHE ZWECK ALS RICHTSCHNUR FR EIN ZIELGERICHTETE

STRATEGISCHES BETEILIGUNGSCONTROLLING BEI KOMMUNALEN UNTERNEHMEN DER FFENTLICHE ZWECK ALS RICHTSCHNUR FR EIN ZIELGERICHTETE BETEILIGUNGSCONTROLLING BEI KOMMUNALEN UNTERNEHMEN DER FFENTLICHE ZWECK ALS RICHTSCHNUR FR EIN ZIELGERICHTETE PDF-SBBKUDFZARFEZ41-APOM3 123 Page File Size 5,348 KB 3 Feb, 2002 TABLE OF CONTENT Introduction

Mehr

ATEX-Check list. Compiled by: Date: Signature: Acceptable practice at the determination of flash point: Closed cup according to ISO 2719

ATEX-Check list. Compiled by: Date: Signature: Acceptable practice at the determination of flash point: Closed cup according to ISO 2719 Fire and explosion hazard ATEX 137 1999/92/EG und ATEX 95 2014/34/EU Danger assessment and determination of explosion protection zone for the test space as well as the installation site ATEX-Check list

Mehr

Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. edraulic rescue equipment

Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. edraulic rescue equipment Technical Report No. 028-7130 95685-050 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen

Mehr

Baureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32

Baureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich

Mehr

Baureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator

Baureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl

Mehr

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich

Mehr

Führungsring, außenführend Bearing Ring, outside bearing

Führungsring, außenführend Bearing Ring, outside bearing Der Hunger Führungsring wird zur Führung des Kolbens im Zylinderrohr verwendet. Er stellt die Gleitund Führungsfläche zweier bewegter Maschinenteile dar und verhindert deren metallische Berührung. Der

Mehr

Zylinder Cylinders Stand

Zylinder Cylinders Stand Zylinder Cylinders 2-2 Valves, Actuators and Accessories Inhalt Contents Zylinder Cylinders Zylinder ISO 2 doppelwirkend mit/ohne Magnetkolben, mit einstellbarer Endlagendämpfung Technische Daten, Kolben

Mehr

SICHERHEITSVENTILE OHNE BAUTEILPRÜFUNG SAFETY VALVES WITHOUT TEST CERTIFICATE. Type 602 E / Type 601 T for liquids, gaseous media and steam

SICHERHEITSVENTILE OHNE BAUTEILPRÜFUNG SAFETY VALVES WITHOUT TEST CERTIFICATE. Type 602 E / Type 601 T for liquids, gaseous media and steam Ecksicherheitsventile aus Rotguss Angular safety valves made of red brass Typ 602 E / Typ 601 T für Flüssigkeiten, gasförmige Medien und Dampf Type 602 E / Type 601 T for liquids, gaseous media and steam

Mehr

Technische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011

Technische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite

Mehr

Technical data. tri-matic.ch

Technical data. tri-matic.ch TRI-CONTROL VALVE M5 Drosselventile TCV Drosselrückschlagventile TCCV Throttle valves TCV Throttle non-return valves TCCV Technische Daten Funktion: Drossel- bzw. Drosselrückschlagventil Montage: am Zylinder

Mehr

diameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316

diameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite

Mehr

Plungerzylinder ZE (300 bar) Plunger Cylinder ZE (300 bar)

Plungerzylinder ZE (300 bar) Plunger Cylinder ZE (300 bar) Plungerzylinder ZE (300 bar) Plunger Cylinder ZE (300 bar) Einfachwirkender Zylinder Rundbauweise Plunger -Ø: 30 bis 100 mm Hublänge bis 3.000 mm Single Acting Cylinder Round head type Plunger-Ø: 30 to

Mehr

Technische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012

Technische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich

Mehr

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogs or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

Mehr

A P max. 16bar P R max. 64bar R P max. 16bar

A P max. 16bar P R max. 64bar R P max. 16bar direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich

Mehr

Spare parts Accessories

Spare parts Accessories Seite Page Page 7/2 HZF 7/4 Allgemeine Merkmale Hydraulikzylinder mit äußerer Führung General parameters Hydraulic cylinder with external guide Caractéristiques générales Vérin hydraulique avec guidage

Mehr

10DBS 10DAS 10DBM 11DBS...FPM. FPM Dichtungen Seite 119 FPM seals Page 119. Einsatzbereich see page 3 Betriebsdruck

10DBS 10DAS 10DBM 11DBS...FPM. FPM Dichtungen Seite 119 FPM seals Page 119. Einsatzbereich see page 3 Betriebsdruck 10DBS 10DAS 10DBM Dichtungen - Führungselemente PROFIL A 10DBS - 10DAS PROFILE A PROFIL B 10DBS - 10DAS PROFILE B PROFIL C 10DBM PROFILE C Einsatzbereich see page 3 Betriebsdruck

Mehr

VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL USER GUIDE June 2016

VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL USER GUIDE June 2016 Overview The Hamburg Süd VGM Web portal is an application that enables you to submit VGM information directly to Hamburg Süd via our e-portal Web page. You can choose to enter VGM information directly,

Mehr

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 280-X / 281-X / 282-X Type 280-X / 281-X / 282-X. fremdgesteuert Modulbauweise

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 280-X / 281-X / 282-X Type 280-X / 281-X / 282-X. fremdgesteuert Modulbauweise fremdgesteuert Modulbauweise Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) externally controlled modular

Mehr

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 286 Type 286. fremdgesteuert externally controlled

2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 286 Type 286. fremdgesteuert externally controlled fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 8 Druckbereich

Mehr

Kugelhähne Ball-valves

Kugelhähne Ball-valves 163 Ball-valves Features u u unterschiedliche Baureihen für flexible Anwendungen Mini- auch mit Steckanschluss u u Various lines for flexible applications Mini ball valves also with plug connection 164

Mehr

Zubehör Accessories Accessoires

Zubehör Accessories Accessoires Seite Page Page 14/2 DA 14/4 Allgemeine Merkmale Drehantrieb General parameters Rotary drive unit Caractéristiques générales Servomoteur rotatif + 16 Zubehör Accessories Accessoires 14/0 Drehantrieb Rotary

Mehr

2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148

2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff

Mehr

Baureihe 280 / 281 / 282 Type 280 / 281 / /2-Wege Coaxialventil 2/2-way coaxial valve. fremdgesteuert externally controlled

Baureihe 280 / 281 / 282 Type 280 / 281 / /2-Wege Coaxialventil 2/2-way coaxial valve. fremdgesteuert externally controlled fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50

Mehr

TDT. Tandem-Dichtring für Teleskopzylinder Tandem Seal for Telescopic Cylinders. Tandem Seal for Telescopic Cylinders

TDT. Tandem-Dichtring für Teleskopzylinder Tandem Seal for Telescopic Cylinders. Tandem Seal for Telescopic Cylinders Tandem-Dichtring für Teleskopzylinder Tandem-Dichtring für Teleskopzylinder Der Hunger Tandem-Dichtring für Teleskopzylinder dient zur Abdichtung von Teleskopstufen und kann bei Hydrauliköl auf Mineralölbasis

Mehr

Hazards and measures against hazards by implementation of safe pneumatic circuits

Hazards and measures against hazards by implementation of safe pneumatic circuits Application of EN ISO 13849-1 in electro-pneumatic control systems Hazards and measures against hazards by implementation of safe pneumatic circuits These examples of switching circuits are offered free

Mehr

Fittings. Armaturen. Steckarmaturen Kompaktes Einbauen. Instant Push-In Fittings Compact Installation. Ambient temperature range: - 10 C + 70 C*

Fittings. Armaturen. Steckarmaturen Kompaktes Einbauen. Instant Push-In Fittings Compact Installation. Ambient temperature range: - 10 C + 70 C* Steckarmaturen Kompaktes Einbauen Instant Push-In Compact Installation Umgebungstemperatur: - 10 C + 70 C* Pmax: 1 bar Medium: Neutrale Gase * Bei Abweichungen bitten wir um Rückfrage. Ambient temperature

Mehr

2/2-way solenoid valve - Type 239

2/2-way solenoid valve - Type 239 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 10 40 Druckbereich Gehäusewerkstoff Messing Dichtw erkstoff Sitzventil mit

Mehr

J RG IMMENDORFF STANDORT F R KRITIK MALEREI UND INSPIRATION ERSCHEINT ZUR AUSSTELLUNG IM MUSEUM LU

J RG IMMENDORFF STANDORT F R KRITIK MALEREI UND INSPIRATION ERSCHEINT ZUR AUSSTELLUNG IM MUSEUM LU J RG IMMENDORFF STANDORT F R KRITIK MALEREI UND INSPIRATION ERSCHEINT ZUR AUSSTELLUNG IM MUSEUM LU 8 Feb, 2016 JRISFRKMUIEZAIMLAPOM-PDF33-0 File 4,455 KB 96 Page If you want to possess a one-stop search

Mehr

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H

Deceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H Rotary Dampers with high-torque range WRD-H 67 WRD-H 85 WRD-H 128 WRD-H 161 WRD-H 21 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Applications: - Mechanical and

Mehr

10GA 10GA. a = 0,2 L. FPM Dichtungen Seite 191 FPM seals Page 191. Einsatzbereich see page 3 Temperatur -30 C bis 100 C Gleitgeschwindigkeit

10GA 10GA. a = 0,2 L. FPM Dichtungen Seite 191 FPM seals Page 191. Einsatzbereich see page 3 Temperatur -30 C bis 100 C Gleitgeschwindigkeit 10GA Dichtungen - Führungselemente L H Einsatzbereich see page 3 Temperatur -30 C bis 100 C Gleitgeschwindigkeit Medien siehe Seite 11 10GA Werkstoffe siehe Seiten 4-9 Hülse 1 Stahl Abstreifer 2 NBR 90

Mehr

2/2-way solenoid valve - Type 218

2/2-way solenoid valve - Type 218 - direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite

Mehr

SWC SPANNLAGER UND GEHÄUSE SWC RADIAL INSERT BALL BEARINGS AND HOUSING

SWC SPANNLAGER UND GEHÄUSE SWC RADIAL INSERT BALL BEARINGS AND HOUSING SWC SPANNLAGER UND GEHÄUSE SWC RADIAL INSERT BALL BEARINGS AND HOUSING SWC bietet Gehäuseeinheiten bestehend aus einem Spannlager und wahlweise Stehgehäuse (UCP), Zweiloch-Flansch-Gehäuse (UCFL) oder Vierloch-Flansch-Gehäuse

Mehr

Konische Kappen und Stopfen. tapered caps & plugs. Die T-Serie war die erste Serie, die im Jahr 1948 produziert wurde.

Konische Kappen und Stopfen. tapered caps & plugs. Die T-Serie war die erste Serie, die im Jahr 1948 produziert wurde. Konische Kappen und Stopfen Konische Kappen und Stopfen bieten eine komplette, flexible und vielseitige Lösung. Sie können als Kappe oder als Schutzstopfen für Bohrungen verwendet werden. Die konische

Mehr

Hülsenfreilauf / HF One-way Clutch Bearing

Hülsenfreilauf / HF One-way Clutch Bearing BEARINGS A L L FOR B E YOUR A R IFUTURE N G S Hülsenfreilauf / HF One-way Clutch Bearing Zen Ball Bearings are manufactured to the highest quality for standard and non-standard applications. Our technical

Mehr

Umschaltventile Magnete

Umschaltventile Magnete Umschaltventile Magnete DFE1/6 estellnr. Typ 2-11-12 DFE1/618ES-W22-12VDC 2-11-13 DFE1/618ES-W22-24VDC 24--116 DFE1/618ES-Y22-12VDC 24--117 DFE1/618ES-Y22-24VDC 24--1 DFE1/618ES-W22-12VDC 24--12 DFE1/618ES-W22-24VDC

Mehr

Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series.

Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series. BEARINGS A L L FOR B E YOUR A R IFUTURE N G S 1 Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series Zen Ball Bearings are manufactured to the highest quality for standard

Mehr

direktgesteuert direct acting

direktgesteuert direct acting 1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite

Mehr

Technische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011

Technische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011 zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN

Mehr

Word-CRM-Upload-Button. User manual

Word-CRM-Upload-Button. User manual Word-CRM-Upload-Button User manual Word-CRM-Upload for MS CRM 2011 Content 1. Preface... 3 2. Installation... 4 2.1. Requirements... 4 2.1.1. Clients... 4 2.2. Installation guidelines... 5 2.2.1. Client...

Mehr

Pneumatic linear actuator - series MCB with cylinder Pneumatischer Linearantrieb Serie MCB mit Zylinder

Pneumatic linear actuator - series MCB with cylinder Pneumatischer Linearantrieb Serie MCB mit Zylinder Technische Eigenschaften: - Betriebsdruck: 2 7 bar - Wiederholgenauigkeit: 0.1 - Betriebstemperaturbereich von 5 C bis 60 C - Antrieb: durch integrierten Zylinder - Gehäuse: hartbeschichtete Aluminium

Mehr

OFA20-35 OFA20-35S OFA30-35 OFA30-35S bar 5 60 C. Ø10 mm Ø16 mm Ø25 mm Ø40 mm. 26 Ncm 100 Ncm 430 Ncm 1900 Ncm. 206 g 272 g.

OFA20-35 OFA20-35S OFA30-35 OFA30-35S bar 5 60 C. Ø10 mm Ø16 mm Ø25 mm Ø40 mm. 26 Ncm 100 Ncm 430 Ncm 1900 Ncm. 206 g 272 g. Pneumatische Ein-Finger-Winkelgreifer zum Klemmen aureihe Einfachwirkender ntrieb. Magnetische Sensoren als Sonderzubehörteile. ebensmittelfett FD-H1. One finger angular pneumatic grippers for clamping,

Mehr

Guidance Notes for the eservice 'Marketing Authorisation & Lifecycle Management of Medicines' Contents

Guidance Notes for the eservice 'Marketing Authorisation & Lifecycle Management of Medicines' Contents Guidance Notes for the eservice 'Marketing Authorisation & Lifecycle Management of Medicines' Contents Login... 2 No active procedure at the moment... 3 'Active' procedure... 4 New communication (procedure

Mehr

VIDEO CALL CAMERA G-VCAM-01

VIDEO CALL CAMERA G-VCAM-01 VIDEO CALL CAMERA G-VCAM-01 EN AUS GUTEM GRUND ENGLISH 07-10 2 SAFETY AND INFORMATION Safety 7 This camera is designed to transmit video and audio signals. All other uses are expressly prohibited. 7 Protect

Mehr