DURIS P 5 Datasheet Version 1.3 GW DASPA1.EC. High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures.
|
|
- Julius Kopp
- vor 6 Jahren
- Abrufe
Transkript
1 DURIS P 5 Datasheet Version 1.3 High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures. Hocheffiziente LED mittlerer Leistungsklasse mit langer Lebensdauer auch bei hohen Strömen und hohen Sperrschichttemperaturen. Features: Besondere Merkmale: Package: SMT package Gehäusetyp: SMT Gehäuse Viewing angle at 50 % I V : 130 Abstrahlwinkel bei 50 % I V : 130 Color: 2700 K K (white) Farbe: 2700 K K (weiß) CRI: min. 80 ( typ. 83 ) CRI: min. 80 ( typ. 83 ) Luminous Flux: typ K Lichtstrom: typ K Luminous efficacy: typ K Lichtausbeute: typ K Corrosion Robustness: Superior Corrosion Korrosionsstabilität: Höchste Robustness Korrosionsbeständigkeit Lumen Maintenance: Test results according to Lichtstromerhaltung: Testergebnisse nach IESNA LM-80 available IESNA LM-80 verfügbar Applications Anwendungen Architectural lighting Architekturbeleuchtung Accent and effect lighting Akzent- und Effektbeleuchtung Room lighting: ceiling light, cove lighting, Raumbeleuchtung: Deckenbeleuchtung, chandeliers, pendants, sconces Nischenbeleuchtung, Kronleuchter, Hängeleuchten, Wandleuchter Channel letters Leuchtlettern Linear lights Linearbeleuchtung
2 Ordering Information Bestellinformation Type: Typ: Color Temperature Luminous Flux 1) page 25 Farbtemperatur Lichtstrom 1) Seite 25 Ordering Code Bestellnummer I F = 100 ma [K] Φ V [lm] -HQHS-5H7I Q65111A2353 -HPHR-5H7I Q65111A2352 -HQHS-5J7K Q65111A5313 -HPHR-5J7K Q65111A5312 -HQHS-5L7N Q65111A8957 -HPHR-5L7N Q65111A2351 -HPHR-5R8T Q65111A2350 -GUHQ-5R8T Q65111A2349 -GUHQ-5U8X Q65111A3734 Note: Anm.: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. -HPHR-5H7I-1 means that only one group HP, HQ, HR will be shippable for any packing unit. In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing unit. -HPHR-5H7I-1 means that the device will be shipped within the specified limits. In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. -HPHR-5H7I-1 means that only one forward voltage group K,L,M,N,P will be shippable. Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. -HPHR-5H7I-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen HP, HQ, HR enhalten ist. Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe geliefert. Z.B. -HPHR-5H7I-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen enthalten ist. -HPHR-5H7I-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. -HPHR-5H7I-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen K,L,M,N,P enthalten (siehe Seite 5)
3 Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Storage temperature range Lagertemperatur Junction temperature absolute * Sperrschichttemperatur absolut * Junction temperature Sperrschichttemperatur Forward current Durchlassstrom (T S = 25 C) 2) page 25 T op C T stg C T j, abs 170 C T j 125 C I F ma Reverse current I R 200 ma Sperrstrom 2) Seite 25 ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS HBM, Class 3B) V ESD 8 kv Note: Anm: * This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than L70B50 after 1000 h. * Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei dürfen keine Totalausfälle auftreten und der Lichtstrom muß nach 1000 h über L70B50 liegen
4 Characteristics (T S = 25 C; I F = 100 ma) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Viewing angle at 50 % I V (typ.) 2ϕ 130 Abstrahlwinkel bei 50 % I V Forward voltage Durchlassspannung Reverse voltage Sperrspannung (I R = 20 ma) Color rendering index Farbwiedergabe Index Real thermal resistance junction / solder point 3) page 25 Realer Wärmewiderstand Sperrschicht / Lötpad 3) Seite 25 (min.) (typ.) (max.) V F V F V F (max.) V R 1.2 V (typ.) (min.) (typ.) (max.) R a 83 R a 80 R th JS real 22 R th JS real 25 V V V - - K/W K/W "Electrical" thermal resistance junction / solder point 3) page 25 "Elektrischer" Wärmewiderstand Sperrschicht / 3) Seite 25 Lötpad (with efficiency η e = 36 %) (typ.) (max.) R th JS el 14 R th JS el 16 K/W K/W Note: Anm.: Individual forward voltage groups see next page Durchlassspannungsgruppen siehe nächste Seite
5 Brightness Groups Helligkeitsgruppen Group Luminous Flux 1) page 25 Luminous Flux 1) page 25 Luminous Intensity 4) page 25 Gruppe Lichtstrom 1) Seite 25 Lichtstrom 1) Seite 25 Lichtstärke Forward Voltage Groups Durchlassspannungsgruppen (min.) Φ V [lm] (max.) Φ V [lm] (typ.) I V [cd] GT GU HP HQ HR HS Group Gruppe (min.) V F [V] (max.) V F [V] K L M N P ) Seite
6 Chromaticity Coordinate Groups 5) Seite 25 Farbortgruppen 5) page 25 Cy Coordinates in reference to CIE 1931 (cx cy) Cx Cy K U 8T 8S 8R 7U K 8Q 7T 7S 8P 7R neutral white 6U 8O 7Q 6T 6S 7N 7P 6R 5U 7M 7O 6Q 5T K 5S 6P 7L 6N 5R 6O 5Q 7K 6M 5P 5000 K 6L 5N 5O 7J I 6K 5M 6J 5L warm white 7H 6I 5K 6H I 5J 5H 5000 K 4500 K 4000 K 3500K 3500 K 3000 K 2700 K 3000 K 6V 6W 6X 5V 5W 5X 8V 8W 8X 7V 7W 7X Cx Coordinates in reference to CIE 1931 (cx cy)
7 Color Chromaticity Groups 5) Seite 25 Farbortgruppen Group Gruppe 5) page 25 Cx Cy Group Gruppe Cx Cy Group Gruppe 5H O T H O T H O T I O U I P U I P U J P U Cx Cy
8 Group Gruppe Cx Cy Group Gruppe Cx Cy Group Gruppe 6J P V J Q V K Q V K Q V K Q W L R W L R W L R W Cx Cy
9 Group Gruppe Cx Cy Group Gruppe Cx Cy Group Gruppe 5M R X M S X M S X N S X N S N T Cx Cy
10 Group Name on Label Gruppenbezeichnung auf Etikett Example: HP-5H-L Beispiel: HP-5H-L Brightness Helligkeit Chromaticity Coordinate Farbort HP 5H L Forward Voltage Durchlassspannung Note: Anm.: No packing unit / tape ever contains more than one group for each selection. In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten
11 Relative Spectral Emission - V(λ) = Standard eye response curve Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit Φ rel = f (λ); T S = 25 C; I F = 100 ma 4) page 25 4) Seite I rel 0.8 : warm white : V λ λ [nm] Radiation Characteristics Abstrahlcharakteristik I rel = f (ϕ); T S = 25 C 4) page 25 4) Seite ϕ [ ] Irel
12 Forward Current Durchlassstrom I F = f (V F ); T S = 25 C I F [ma] 4) page 25, 6) page 25 4) Seite 25, 6) Seite Relative Luminous Flux Relativer Lichtstrom Φ V /Φ V (100 ma) = f(i F ); T S = 25 C Φ V Φ V (100mA) 4) page 25, 6) page 25 4) Seite 25, 6) Seite V F [V] I F [ma] 250 Chromaticity Coordinate Shift 4) Seite 25 Farbortverschiebung Cx, Cy = f(i F ); T S = 25 C Cx Cy ) page 25 : Cx : Cy I F [ma]
13 4) page 25 Relative Forward Voltage 4) Seite 25 Relative Vorwärtsspannung ΔV F = V F - V F (25 C) = f(t j ); I F = 100 ma 4) page 25 Relative Luminous Flux 4) Seite 25 Relativer Lichtstrom Φ V /Φ V (25 C) = f(t j ); I F = 100 ma V F [V] 0.20 Φ v Φ v (25 C) T j [ C] T j [ C] Chromaticity Coordinate Shift 4) Seite 25 Farbortverschiebung Cx, Cy = f(tj); I F = 100 ma Cx Cy ) page 25 : Cx : Cy T j [ C]
14 Max. Permissible Forward Current Max. zulässiger Durchlassstrom I F = f (T) 280 I F [ma] 260 Gx DASPA1.xx : T S Do not use below 30 ma T S [ C]
15 Package Outline Maßzeichnung 7) page 25 7) Seite 25 Approximate Weight: Gewicht: ESD information: ESD Information: 30 mg 30 mg LED is protected by ESD device which is connected in parallel to LED-Chip. Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschaltet ist
16 7) page 25 Recommended Solder Pad Reflow 7) Seite 25 Empfohlenes Lötpaddesign Reflow-Löten soldering
17 Note: Anm.: Package not suitable for ultra sonic cleaning. For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Das Gehäuse ist für Ultraschallreinigung nicht geeignet. Um eine verbesserte Lötstellenkontaktierung zu erreichen, empfehlen wir, unter Standard- Stickstoffatmosphäre zu löten
18 Reflow Soldering Profile Reflow-Lötprofil Product complies to MSL Level 2 acc. to JEDEC J-STD-020D C T C 217 C t P t L T p OHA C 150 t S C s 300 t Profile Feature Profil-Charakteristik Ramp-up rate to preheat* ) 25 C to 150 C Time t S T Smin to T Smax Ramp-up rate to peak* ) T Smax to T P Liquidus temperature Time above liquidus temperature Symbol Symbol t S T L t L Minimum 60 Pb-Free (SnAgCu) Assembly Recommendation 2 3 K/s Maximum OHA04612 Unit Einheit s K/s C s Peak temperature Time within 5 C of the specified peak temperature T P - 5 K Ramp-down rate* T P to 100 C Time 25 C to T P T P t P All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range C s K/s s
19 Taping Gurtung 7) page 25 7) Seite
20 Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on 180 mm reel W 1 D 0 P 0 P 2 F E W A N 13.0 ±0.25 P 1 Label Direction of unreeling W 2 Direction of unreeling Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC ; EIA 481-D OHAY0324 Tape dimensions [mm] Gurtmaße [mm] Tape dimensions in mm W P 0 P 1 P 2 D 0 E F / ± ± 0.1 or 8 ± ± ± ± ± 0.05 Reel dimensions [mm] Rollenmaße [mm] Reel dimensions in mm A W N min W 1 W 2max
21 _< C). _< WET Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Version 1.3 Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) EX XAM AMP MPL LE OSRAM Opto Semiconductors ors (6P) BATCH ENO: E234 (1T) LOT NO: (9D) D/M: D/C: 1234 (X) PROD NO: (Q)QTY: AMD) AMD/ D C 9999 (G) GROUP: LX XXXX RoHS Compliant Pack: RXX DEMY BIN1: XX-XX-X-XXX-X ML Temp ST X XXX C X XXX X_X123_ _ X XX-XX-X-X X-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot 5% 10% 15% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, examine units, if necessary bake units CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS LEVEL If blank, see bar code label 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 30 C/60% RH. Floor time see below b) Stored at 10% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRAM OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten
22 _< C). _< Bin2: Q-1-20 Bin3: ML 2 2a 220 C R 11 0 (9D) D/C: 0144 Bin2: Q-1-20 Bin3: ML Temp ST C R 2a Version 1.3 Transportation Packing and Materials Kartonverpackung und Materialien Barcode label Barcode label CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS LEVEL If blank, see bar code label 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 30 C/60% RH. Floor time see below b) Stored at 10% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 123GH1234 Muster (X) PROD NO: 1 (9D) D/C: (Q)QTY: 2000 LSY T676 Bin1: P-1-20 Multi TOPLED Temp ST 240 C R C RT Additional TEXT R077 DEMY PACKVAR: R18 (G) GROUP: P-1+Q-1 OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 123GH1234 Muster (X) PROD NO: (Q)QTY: 2000 LSY T676 Bin1: P-1-20 Multi TOPLED 240 C R C RT Additional TEXT R077 DEMY PACKVAR: R18 (G) GROUP: P-1+Q-1 OSRAM Packing Sealing label OHA02044 Dimensions of transportation box in mm Width Length Height Breite Länge Höhe 195 ± ± 5 30 ±
23 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. spotlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. This LED is designed for specific/recommended applications only. Please consult OSRAM Opto Semiconductors Sales Staff in advance for detailed information on other non-recommended applications (e.g. automotive) OR Please visit Change management for this component is aligned with the requirements of the lighting market. Hinweise Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer s). Unter realen Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus. Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.b. Spotlights), kann ein temporär eingeschränktes Sehvermögen oder auch Nachbilder zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen. Die LED ist ausschließlich für spezifisch empfohlene Anwendungen konzipiert. Bitte kontaktieren Sie das OSRAM Opto Semiconductors Vertriebspersonal für detailierte Informationen über nicht empfohlene Anwendungsbereiche (z.b. Automobilbereich). oder besuchen Sie Das Änderungsmanagement dieses Bauteils ist an den Anforderungen des Lichtmarktes ausgerichtet
24 Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Disclaimer Bei abweichenden Angaben im zweisprachigen Wortlaut haben die Angaben in englischer Sprache Vorrang. Bitte beachten! Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, müssen für diese Zwecke ausdrücklich zugelassen sein! Kritische Bauteile* dürfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. **) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist
25 Version 1.3 Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of ± 7 %. 1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 10 ms, mit einer Genauigkeit von ± 7 % ermittelt. 2) Forward Voltage: The forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.05 V. 2) Durchlassspannung: Spannungswerte werden mit einer Stromeinprägedauer von 1 ms, mit einer Genauigkeit von ± 0.05 V ermittelt. 3) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single LEDs within one packing unit. 3) Kennlinien: Im gestrichelten Bereich der Kennlinien muss mit erhöhten Abweichungen zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 4) Color reproduction index: Color reproduction index values (CRI-RA) are measured during a current pulse of typically 10 ms and with a tolerance of ± 2. 4) Farbwiedergabe Index: Werte des Farbwiedergabe Index (CRI-RA) werden während eines Strompulses einer typischen Dauer von 10 ms, mit einer Genauigkeit ± 2 ermittelt. 5) Thermal Resistance: Rth max is based on statistic values (6σ). 5) Wärmewiderstand: Rth statistischen Werten (6σ). 6) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 7) Chromaticity coordinate groups: Chromaticity coordinate groups are measured during a current pulse duration of typically 10 ms with a tolerance of ± ) 8) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm. 8) max basiert auf Farbortgruppen: Farbortgruppen werden mit einer Stromeinprägedauer von 10 ms, mit einer Genauigkeit von ±0.005 ermittelt. Maßtoleranz: Wenn in der Zeichnung nicht anders angegeben, gilt eine Toleranz von ±0,1. Maße werden in mm angegeben.
26 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D Regensburg All Rights Reserved
Silicon NPN Phototransistor with V λ Characteristics NPN-Silizium-Fototransistor mit V λ Charakteristik Version 1.1 SFH 3711
214-8-1 Silicon NPN Phototransistor with V λ Characteristics NPN-Silizium-Fototransistor mit V λ Charakteristik Version 1.1 SFH 3711 Features: Besondere Merkmale: Spectral range of sensitivity: (typ) 47...
MehrSilicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.1 SFH 3204
214-1-14 Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.1 SFH 324 Features: Besondere Merkmale: Spectral range of sensitivity: (typ) 45... 112 nm Spektraler Bereich der Fotoempfindlichkeit:
MehrSOLERIQ S 19 Datasheet Version 1. 3 GW KAHLB2.DM
2016-01-07 SOLERIQ S 19 Datasheet Version 1. 3 The SOLERIQ S products were specifically designed for applications requiring large flux packages out of a compact area. This Brilliant Color version is designed
MehrMulti-Chip-Gehäuse mit 3 Emittern und einem Detektor Small package: (WxDxH) 4.7 mm x 2.5 mm x 0.9 mm
! 2007-05-23 BioMon Sensor Version alpha.3 BioMon Draft - This design is for Reference only. Features: Besondere Merkmale: Multi chip package featuring 3 emitters and one detector Multi-Chip-Gehäuse mit
MehrOSRAM OSTAR - Lighting IR 6-fold with Optics (850nm) - 140 Version 1.1 SFH 4750
21-4-21 OSRAM OSTAR - Lighting IR 6-fold with Optics (8nm) - 14 Version 1.1 SFH 47 Features: Besondere Merkmale: 3. W optical power at IF=1A 3. W optische Leistung bei IF=1A Active chip area 2.1 x 3.2
MehrOSLON SSL Ceramic package Lead (Pb) Free Product - RoHS Compliant LCW CP7P. Vorläufige Daten / Preliminary Data
OSLON SSL Ceramic package Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und Linse Typischer Lichtstrom:
MehrDURIS P 5 Datasheet Version 1.1 GB DASPA1.13. High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures.
2015-02-12 DURIS P 5 Datasheet Version 1.1 High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures. Hocheffiziente LED mittlerer Leistungsklasse mit langer
MehrMini TOPLED Datasheet Version 2.3. LCB M67S CoD blue Cx=0.19 / Cy=0.19
2015-08-20 Mini TOPLED Datasheet Version 2.3 LCB M67S CoD blue Cx=0.19 / Cy=0.19 Features: Package: white SMT package, colored diffused resin Technology: InGaN Viewing angle at 50 % I V : 120 (Lambertian
MehrGaAs Infrared Emitter Arrays GaAs-IR-Lumineszenzdioden-Zeilen Version 1.1 LD 260, LD 262, LD 263, LD 264, LD 265, LD 266, LD 267, LD 268, LD 269
215-6-24 GaAs Infrared Emitter Arrays GaAs-IR-Lumineszenzdioden-Zeilen Version 1.1 LD 26, LD 262, LD 263, LD 264, LD 265, LD 266, LD 267, LD 268, LD 269 Features: Besondere Merkmale: GaAs infrared emitting
MehrOSLON SSL 80 Datasheet Version 1.1 GW CS8PM1.PM
2015-09-28 OSLON SSL 80 Datasheet Version 1.1 Higher performance. Lower thermal resistance. Extended range of driving conditions. This OSLON SSL family new generation LED offers a prefocused radiation
MehrDISPLIX Oval Datasheet Version 1.0 KT HAVPA1.12
2014-11-26 DISPLIX Oval Datasheet Version 1.0 This device is especially designed for full color video walls.the black package guarantees highest contrast. Features: Package: SMD epoxy package with silicone
MehrInfrared Emitter (940 nm) IR-Lumineszenzdiode (940 nm) Version 1.0 SFH 4846. verbunden
215-1-29 Infrared Emitter (94 nm) IR-Lumineszenzdiode (94 nm) Version 1. SFH 4846 Features: Wavelength 95nm Anode is electrically connected to the case Short switching times Spectral match with silicon
MehrKorrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-02-15 OSLON SSL 80 Datasheet Version 1.0 Highest flux. Highest efficacy. This OSLON SSL family next generation LED offers a prefocused radiation pattern making it the ideal choice for spot lighting
MehrOSLON LX Datasheet Version 1.2 LUW CNAP
213-6-11 OSLON LX Datasheet Version 1.2 The OSLON LX combines high light output with the outstanding robustness of a ceramic package. The radiation of the integrated lens makes it possible to use this
MehrSilicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.2 BPX 81. Spectral range of sensitivity: (typ) 450... 1100
2015-06-24 Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.2 BPX 81 Features: Spectral range of sensitivity: (typ) 450... 1100 nm Besondere Merkmale: Spektraler Bereich der Fotoempfindlichkeit:
MehrOSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LCW CQ7P.CC. Released
OSLON SSL Ceramic package - 8 radiation pattern Lead (Pb) Free Product - RoHS Compliant Released Besondere Merkmale Gehäusetyp: SMT-Keramikgehäuse mit Silikonverguss und Linse Typischer Lichtstrom: 74
MehrOSRAM OSTAR Stage Datasheet. Version 1.3 LE CWUW S2W. Compact lightsource in SMT technology, glass window on top, RoHS compliant
OSRAM OSTAR Stage Datasheet Version 1.3 LE CWUW S2W Compact lightsource in SMT technology, glass window on top, RoHS compliant Features Package: compact lightsource in SMT technology with glass window
MehrGaAs-IR-Lumineszenzdiode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant LD 274
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant LD 274 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad Hohe Zuverlässigkeit Gute spektrale Anpassung an
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LH N974
CHIPLED Lead (Pb) Free Product - RoHS Compliant LH N974 Besondere Merkmale Gehäusetyp: 1206, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm Wellenlänge:
MehrDURIS P 5 Datasheet Version 1.1 GD DASPA1.14. High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures.
2014-12-18 DURIS P 5 Datasheet Version 1.1 High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures. Hocheffiziente LED mittlerer Leistungsklasse mit langer
MehrOSLON Square Datasheet Version 1.0. LUW CQAR (streetwhite) Package: SMT ceramic package with silicone resin with lens
2012-02-16 OSLON Square Datasheet Version 1.0 Small size high-flux LED for slim designs (between 200 ma and 1.5 A constant current). 264 lm, 120 lm/w at 700 ma. Kompakte Lichtquelle für platzsparende Designs
MehrSOLERIQ S 19 Datasheet Version 1.1 GW KAHNB1.CM
2015-01-21 SOLERIQ S 19 Datasheet Version 1.1 The SOLERIQ S products were specifically designed for applications requiring large flux packages out of a compact area. Die SOLERIQ S Produkte wurden speziell
MehrOSRAM OSTAR - Lighting plus LE UW S2LN. Vorläufige Daten / preliminary data. acc OS-PD-2011-019
OSRAM OSTAR - Lighting plus LE UW S2LN Vorläufige Daten / preliminary data acc OS-PD-2011-019 Besondere Merkmale Gehäusetyp: Kompakte Lichtquelle in Multi-Chip SMT Technologie mit Silikonlinse Besonderheit
MehrKorrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-06-15 OSLON Square Datasheet Version 1.2 This most compact high-power LED (2 W class) allows dense clustering and simple circuit designs. Its extremely low thermal resistance helps to keep the efficiency
MehrKorrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2014-01-10 OSLON SSL 80 Datasheet Version 2.0 Highest flux. Highest efficacy. This OSLON SSL family next generation LED offers a prefocused radiation pattern making it the ideal choice for spot lighting
MehrHoher Koppelfaktor in Lichtschranken in Verbindung mit SFH 3100 F High reliability Hohe Zuverlässigkeit
27-4-3 GaAs Infrared Emitter (Mini Sidelooker) GaAs-IR-Lumineszenzdiode (Mini Sidelooker) Version 1. SFH 41 Features: Besondere Merkmale: Peak wavelength of 95 nm Wellenlänge der Strahlung 95 nm Narrow
MehrOSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LUW CP7P
OSLON SSL Ceramic package - 8 radiation pattern Lead (Pb) Free Product - RoHS Compliant LUW CP7P Abkündigung nach OS-PD-211-14 Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und
MehrHigh Accuracy Ambient Light Sensor Hochgenauer Umgebungslichtsensor Version 1.5 SFH 5711
2015--20 High Accuracy Ambient Light Sensor Hochgenauer Umgebungslichtsensor Version 1.5 SFH 5711 Features: Besondere Merkmale: Opto hybrid with logarithmic current output Optohybrid mit logarithmischem
MehrOSLON SQUARE Data Sheet Version 1.0 LUW CQAR (EQW) Features. Merkmale. Applications
OSLON SQUARE Data Sheet Version 1.0 Small size high-flux LED for slim designs (between 200 ma and 1.5 A constant current). 278 lm and 126 lm/w at 700 ma; 152 lm and 146 lm/w at 350 ma. Kompakte Lichtquelle
MehrSilicon Differential Photodiode Silizium-Differential-Fotodiode Version 1.2 BPX 48
215-9-4 Silicon Differential Photodiode Silizium-Differential-Fotodiode Version 1.2 BPX 48 Features: Especially suitable for applications from 4 nm to 11 nm High photosensitivity DIL plastic package with
MehrKorrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-02-15 OSLON SSL 150 Datasheet Version 1.0 This ultra-compact 1 W class LED provides a wide radiation pattern allowing perfect interaction and various designs including color mixing LED clusters. Its
MehrGrüne Laser Diode 120 mw in TO56 Bauform Green Laser Diode 120 mw in TO56 Package PLP 520 PRELIMINARY
Grüne Laser Diode 120 mw in TO56 Bauform Green Laser Diode 120 mw in TO56 Package PLP 520 PRELIMINARY Besondere Merkmale Optische Ausgangsleistung (Dauerstrich- Betrieb): 90/120mW (T Case = 25 C) Typ.
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Niedriger
MehrBlaue Laser Diode 1.4 W in TO56 Bauform Blue Laser Diode 1.4 W in TO56 Package PL TB450 PRELIMINARY
Blaue Laser Diode 1.4 W in TO56 Bauform Blue Laser Diode 1.4 W in TO56 Package PL TB450 PRELIMINARY Besondere Merkmale Typ. Emissionswellenlänge 450nm Effiziente Strahlungsquelle für Dauerstrich- und gepulsten
MehrDISPLIX Oval Datasheet Version 1.0 KY HAVPA1.22
2015-01-29 DISPLIX Oval Datasheet Version 1.0 This device is especially designed for 3D RGBY video walls and general electronic variable message signs. the black package guarantees highest contrast. Das
MehrESD sicher bis 2 kv nach ANSI/ESDA/JEDEC JS-001-2011 Superior Corrosion Robustness (see chapter package outlines)
214-1-8 High Power Infrared Emitter (85 nm) IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung Version 1.2 SFH 4235 Features: Besondere Merkmale: IR lightsource with high efficiency IR Lichtquelle
MehrOSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LY CP7P. Released
OSLON SSL Ceramic package - 8 radiation pattern Lead (Pb) Free Product - RoHS Compliant LY CP7P Released Besondere Merkmale Gehäusetyp: SMT-Keramikgehäuse mit Silikonverguss und Linse Typischer Lichtstrom:
MehrKorrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-06-15 OSLON SSL 80 Datasheet Version 1.2 This ultra-compact 1 W class LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Its low thermal resistance
MehrDisplay with controlling function Anzeige mit Funktionskontrolle
212-8-17 Multi TOPLED with LED and Phototransistor-Detector Multi TOPLED mit LED und Fototransistor-Detektor Version 1. SFH 722 Features: Besondere Merkmale: Display function can be controlled by built-in
MehrFarbe: neutralweiß; CTR = 4000 K - 5700 K; CRI (min.) = 70*; CRI (typ.) = 72 ESD - withstand voltage: 8 kv acc. to
2012-09-17 OSLON SSL 150 Datasheet Version 1.1 Small size high flux LED for slim designs (between 100 ma and 800 ma constant current). 136 lm (typ.), 126 lm/w (typ.) at 350 ma (5000 K). Kompakte Lichtquelle
MehrOSLON SSL 150 Datasheet Version 1.2 LT CPDP
2013-06-15 OSLON SSL 150 Datasheet Version 1.2 This ultra-compact 1 W class LED provides a wide radiation pattern allowing perfect interaction and various designs including color mixing LED clusters. Its
MehrCHIPLED 0603 Datasheet Version 1.0 LG Q971. Package: SMT package 0603, colorless diffused resin, 1.6 mm x 0.8 mm x 0.8 mm
2012-11-06 CHIPLED 0603 Datasheet Version 1.0 Features: Besondere Merkmale: Package: SMT package 0603, colorless diffused resin, 1.6 mm x 0.8 mm x 0.8 mm Gehäusetyp: SMT Gehäuse 0603, farbloser diffuser
MehrESD - Festigkeit: 8 kv nach JESD22-A114-F JESD22-A114-F Corrosion Robustness: Improved corrosion robustness
OSLON SSL 80 Datasheet Version 1.0 Small size high flux LED for slim designs (between 0 ma and 00 ma constant current). 355 mw, 48% efficacy at 350 ma. Kompakte Lichtquelle für platzsparende Designs (für
MehrESD sicher bis 2 kv nach ANSI/ESDA/JEDEC JS-001- HBM, Klasse 2 Narrow half angle (+/- 12 ) Enger Abstrahlwinkel (+/- 12 )
2014-03-10 Narrow beam LED in Dragon Dome package (850nm) Engwinklige LED im Dragon Dome Gehäuse (850 nm) Version 1.3 SFH 4783 Features: Besondere Merkmale: IR lightsource with high efficiency IR-Lichtquelle
MehrOSLON SSL Lead (Pb) Free Product - RoHS Compliant LD CP7P, LT CP7P. Vorläufige Daten / Preliminary Data
OSLON SSL Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und Linse Typischer Lichtfluss: 515 mw (tief
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4235
IR-Lumineszenzdiode (8 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (8 nm) Lead (Pb) Free Product - RoHS Compliant SFH 423 Vorläufige Daten / Preliminary Data Wesentliche Merkmale IR-Lichtquelle
MehrOSLON Square Data Sheet Version 1.0 LCW CQAR.EC. Features. Merkmale
OSLON Square Data Sheet Version 1.0 Small size high-flux LED for slim designs (between 200 ma and 1.5 A constant current). 200 lm, 91 lm/w at 700 ma; 113 lm, 108 lm/w at 350 ma (3000 K). Kompakte Lichtquelle
MehrAdvanced Power TOPLED Datasheet Version 1.0 LA G6SP
213-9-24 Advanced Power TOPLED Datasheet Version 1. Advanced Power TOPLED features a compact package with a wide brightness range and high luminous efficiency. Advanced Power TOPLED verfügt über eine platzsparende
MehrOSLON SSL 80 Datasheet Version 1.1 LD CQ7P
2013-08-15 OSLON SSL 80 Datasheet Version 1.1 This ultra-compact 1 W class LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Its low thermal resistance
MehrKorrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-09-30 OSLON SSL 80 Datasheet Version 1.2 This ultra-compact 1 W class LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Its low thermal resistance
MehrOSLON Black Series Lead (Pb) Free Product - RoHS Compliant LD H9GP, LB H9GP, LT H9GP. Vorläufige Daten / Preliminary Data
OSLON Black Series Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Epoxyd Gehäuse mit Silikonlinse Typischer Lichtfluss: 48 mw (tief blau);
MehrBlaue Laser Diode in TO38 ICut Bauform Blue Laser Diode in TO38 ICut Package PL 450B PRELIMINARY
Blaue Laser Diode in TO38 ICut Bauform Blue Laser Diode in TO38 ICut Package PL 450B PRELIMINARY Besondere Merkmale Typ. Emissionswellenlänge 450nm Effiziente Strahlungsquelle für Dauerstrich- und gepulsten
MehrInGaAlP-High Brightness-Lumineszenzdiode (632 nm, High Optical Power) InGaAlP High Brightness Light Emitting Diode (632 nm, High Optical Power)
InGaAlP-High Brightness-Lumineszenzdiode (632 nm, High Optical Power) InGaAlP High Brightness Light Emitting Diode (632 nm, High Optical Power) F 1998A Vorläufige Daten/Preliminary Data Wesentliche Merkmale
MehrGrüne Laser Diode im TO56 Gehäuse Green Laser Diode in TO56 Package PLT5 520 TARGET DATASHEET
Grüne Laser Diode im TO56 Gehäuse Green Laser Diode in TO56 Package PLT5 520 TARGET DATASHEET Besondere Merkmale Optische Ausgangsleistung (Dauerstrich- Betrieb): 50 &30 mw (T Case = 25 C) Typ. Emissionswellenlänge:
MehrOSRAM OSTAR Projection Power Datasheet Version 2.8 - OS-PCN-2015-011-A LE A P2W
2015-10-26 OSRAM OSTAR Projection Power Datasheet Version 2.8 - OS-PCN-2015-011-A OSRAM OSTAR Projection Power is a high luminance LED for projection applications. Die OSRAM OSTAR Projection Power ist
MehrGaAlAs Infrared Emitter (880 nm) GaAlAs-IR-Lumineszensdiode (880 nm) Version 1.0 SFH 487
29-9-3 GaAlAs Infrared Emitter (88 nm) GaAlAs-IR-Lumineszensdiode (88 nm) Version 1. SFH 487 Features: Besondere Merkmale: Very highly efficient GaAlAs-LED GaAlAs-LED mit sehr hohem Wirkungsgrad High reliability
MehrGrüne Laser Diode in TO38 ICut Bauform Green Laser Diode in TO38 ICut Package PL 515 PRELIMINARY
Grüne Laser Diode in TO38 ICut Bauform Green Laser Diode in TO38 ICut Package PL 515 PRELIMINARY Besondere Merkmale Optische Ausgangsleistung (Dauerstrich- Betrieb): 30mW (T Case = 25 C) Typ. Emissionswellenlänge:
MehrOSLON Black Series (940 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4725S
OSLON Black Series (94 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4725S DRAFT - This design is for Reference only. Subject to change without notice. Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad
MehrBLUE LINE TM Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LB 3336
BLUE LINE TM Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LB 3336 Abgekündigt nach OS-PD-25-2 - wird durch LB 3333 ersetzt werden Obsolete acc. to OS-PD-25-2 - will be replaced by LB 3333 Besondere
MehrHyper SIDELED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG A67K, LP A67K. Released
Hyper SIDELED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG A67K, LP A67K Released Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit des
MehrBLUE LINE TM Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T676
BLUE LINE TM Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T676 Abkündigung nach OS-PD-28-14 Obsolete acc. to OS-PD-28-14 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse,
MehrEMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
MehrGreen Laser Diode in TO56 Package Grüne Laser Diode in TO56 Gehäuse Version 0.1 PLT5 510
o2007-05- Green Laser Diode in TO56 Package Grüne Laser Diode in TO56 Gehäuse Version 0.1 PLT5 510 Features Besondere Merkmale Optical output power (continuous wave): 10 mw (T case = 25 C) Optische Ausgangsleistung
MehrSIMID 1210-100. Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µh Rated current 65 to 800 ma
Size 12 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 0 µh Rated current 65 to 800 ma Construction Ceramic or ferrite core Laser-welded winding Flame-retardant encapsulation Features Very wide temperature
MehrPlatinum DRAGON Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant LR W5SN, LA W5SN, LY W5SN. Vorläufige Daten / Preliminary Data
Platinum DRAGON Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Silikon - Verguss
MehrSFH 900. Miniatur-Reflexlichtschranken Miniature Light Reflection Switches SFH 900
Miniatur-Reflexlichtschranken Miniature Light Reflection Switches SFH 900 feo06270 Maβe in mm, wenn nicht anders angegeben/dimensions in mm, unless otherwise specified. Wesentliche Merkmale Reflexlichtschranken
MehrSIDELED LS A670, LO A670, LY A670, LG A670, LP A670
SIDELED LS A670, LO A670, LY A670, LG A670, LP A670 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-2005-005. The product itself will remain within RoHS compliant version. Besondere
MehrPower TOPLED With Lens Enhanced Thin Film LED Lead (Pb) Free Product - RoHS Compliant LS E65F, LA E65F, LY E65F. Vorläufige Daten / Preliminary Data
Power TOPLED With Lens Enhanced Thin Film LED Lead (Pb) Free Product - RoHS Compliant LS E65F, L E65F, LY E65F Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse,
MehrMounting-hole Ø6+0.2 mm. Connection pins. Farbe / colour. gelb / yellow. λ DOM / nm 628 588 570 470 x = 0,25-0,37 y = 0,205-0,375 2φ / 70 70 70 50 50
Metallleuchte SMZS 06 Innenreflektor Metal Indicator SMZS 06 Inside Reflector Spezifikation -Leuchte für Schraubbefestigung M6x0,5 mm. Lieferung incl. Unterlegring und Befestigungsmutter (montiert). Specification
MehrOSRAM OSTAR Projection Power Datasheet Version 1.2 LE B P3W. OSRAM OSTAR Projection Power is a high flux LED for slim designs.
2013-06-18 OSRAM OSTAR Projection Power Datasheet Version 1.2 OSRAM OSTAR Projection Power is a high flux LED for slim designs. Die OSRAM OSTAR Projection Power ist eine hoch effiziente Lichtquelle für
Mehr114-18867 09.Jan 2014 Rev C
Application Specification 114-18867 09.Jan 2014 Rev C High Speed Data, Pin Headers 90 / 180 4pos., shie lded High Speed Data, Stiftleiste 90 / 180, geschirmt Description Beschreibung 1. Packaging of pin
MehrLichtstrom / Luminous ux
HED LED 19W 4kK CRI80+ 12 Abmessungen / Dimensions: Spezifikation / Specification: Artikelnummer / Order number: 122023 Abstrahlwinkel / Beam angle: 12 Nennleistung / Nominal lamp wattage: 19 W Lampenspannung
MehrVerarbeitungsspezifikation Application Specification. Verarbeitungsspezifikation. Application Specification MA-59V093. für for. Winkelstecker für PCB
Verarbeitungsspezifikation MA-59V093 für for Winkelstecker für PCB Right angle plug for PCB 59S2AF-40MXX-Y 59S2LF-40MXX-Y 59S2RF-40MXX-Y 59S2UF-40MXX-Y 200 09-0100 U_Winkler 11.02.09 100 08-v323 U_Winkler
Mehr336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
MehrB81133 X2 MKT/SH 40/100/21/C B81133 X2 MKT/SH 40/100/21/C. EMI Suppression Capacitors X2 / 275 Vac Not for new design
EMI Suppression Capacitors X2 / X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz 1) Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy
MehrSPL LL85 2009-03-04 1
29-3-4 Hybrid Pulsed Laser Diode with Integrated Driver Stage 14 W Peak Power Hybride Impuls-Laserdiode mit integrierter Treiberstufe 14 W Spitzenleistung Version 1. Features: Besondere Merkmale: Low cost,
MehrTaster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
MehrEffiziente Strahlungsquelle für Dauerstrich- und gepulsten Betriebsmodus Reliable InGa(Al)As strained quantum-well structure
2010-05-12 Laser Diode on Submount 2.0 W cw (C-Mount) Laser Diode in offener Bauform 2.0 W cw (C-Mount) Version 1.0 Features: Besondere Merkmale: Efficient radiation source for cw and pulsed operation
MehrCable Tester NS-468. Safety instructions
Cable Tester NS-468 Safety instructions Do not use the cable tester NS-468 if it is damaged. This device is only for use inside dry and clean rooms. This device must be protected from moisture, splash
Mehrcom.tom PORTAL Registrierung
com.tom PORTAL Registrierung Copyright 2000-2010 Beck IPC GmbH Page 1 of 6 TABLE OF CONTENTS 1 AUFGABE... 3 2 DEFINITIONEN... 3 3 PRODUKTE... 3 4 REGISTRIERUNG... 3 5 PROJEKT-REGISTRIERUNG... 4 5.1 PROJEKT...
Mehrfastpim 1 H fast switching H bridge module Features: - 1 Phase Input Rectifier Bridge - 1 Phase fast switching IGBT + FRED full H bridge - NTC
fast switching H bridge module Features: - 1 Phase Input Rectifier Bridge - 1 Phase fast switching IGBT + FRED full H bridge - NTC Copyright by Vincotech 1 Revision: 1 module types / Produkttypen Part-Number
MehrMindestanforderungenanDokumentationvon Lieferanten
andokumentationvon Lieferanten X.0010 3.02de_en/2014-11-07 Erstellt:J.Wesseloh/EN-M6 Standardvorgabe TK SY Standort Bremen Standard requirements TK SY Location Bremen 07.11.14 DieInformationenindieserUnterlagewurdenmitgrößterSorgfalterarbeitet.DennochkönnenFehlernichtimmervollständig
MehrDatenblatt / Data sheet
Elektrische Kenndaten Eigenschaften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Spitzensperrspannung repetitive peak reverse voltages Elektrische Eigenschaften Thermische
MehrXOOMINESCENT. Up to 4,000 lm/m Up to 134 lm/w Reduced assembly time and cost
160 Up to 4,000 lm/m Up to 134 lm/w Reduced assembly time and cost XOOMINESCENT LED Linears unendliche Lumenleistung auf einer Rolle T5 äquivalente, frei skalierbare, alle 280 mm trennbare LED Rollenware
Mehrp^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
MehrSL-PAR38 LED Lampen Serie
DATENBLATT ZENARO RETROFIT SL-PAR38 LED Lampen Serie Produkt Highlights Keine UV oder IR Abstrahlung PAR Lampe mit 20º, 30º and 50º Abstrahlwinkel Optimiertes Thermomanagement Betriebstemperatur von -20
MehrPROTOTYPING 101 CMF // Spec-Sheet Guideline
PROTOTYPING 101 CMF // SpecSheet Guideline = CMF COLOUR MATERIAL FINISH = FARBEN MATERIALIEN OBERFLÄCHEN eine CMFDatei ( CMFSheet, SpecSheet) beschreibt alle für die Erstellung eines Prototypens und die
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Anbauleuchte für Leuchtdioden (LED) Built-on luminaire
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
usweis-nr. / Blatt / Page 2 ktenzeichen / File ref. Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module
MehrThe following products presented in this data sheet are being withdrawn. B66414B6008T002 2003-08-08 2004-02-29 2004-08-31
EFD/EV/DE Cores Series/Type: EFD /8/ The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66B6008T002
MehrRelease Notes BRICKware 7.5.4. Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0
Release Notes BRICKware 7.5.4 Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0 Purpose This document describes new features, changes, and solved problems of BRICKware 7.5.4.
MehrAdvanced Availability Transfer Transfer absences from HR to PPM
Advanced Availability Transfer Transfer absences from HR to PPM A PLM Consulting Solution Public Advanced Availability Transfer With this solution you can include individual absences and attendances from
MehrHIR Method & Tools for Fit Gap analysis
HIR Method & Tools for Fit Gap analysis Based on a Powermax APML example 1 Base for all: The Processes HIR-Method for Template Checks, Fit Gap-Analysis, Change-, Quality- & Risk- Management etc. Main processes
MehrBleifreie Bauteile bei Diotec Lead Free Products at Diotec
Bleifreie Bauteile bei Diotec Lead Free Products at Diotec 1 Bleifreie Bauteile Gesetzliche Grundlage Leadfree Devices Legislation 2 Ausnahmeregelungen in den Richtlinien, Bsp. 2002/95/EG - ROHS Exemptions
MehrDATENBLATT / FACT SHEET
DATENBLATT / FACT SHEET ART.-NR: WHISKY SODA LED WANDLEUCHTE / WALL LUMINAIRE LED.next Außenwandaufbauleuchte zur akzentuierten Beleuchtung von Fassaden und gebäudenahen Wegen. Gehäuse aus Aluminiumguss,
MehrRS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät
Betriebsanleitung RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät ä 2 Operating Instructions RS232 Connection, RXU10 Setting up an RS232 connection
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen
MehrSIFI-A Series. SIFI-A for normal insertion loss Rated voltage 250 V~, 50/60 Hz Rated current 1 A to 20 A
2-ine Filters SIFI- Series 4111 SIFI- for normal insertion loss Rated voltage 2 V~, / Hz Rated current 1 to Construction Two-line filter Metal case Polyurethane potting (U 94 V-) Features Compact design
Mehreurex rundschreiben 094/10
eurex rundschreiben 094/10 Datum: Frankfurt, 21. Mai 2010 Empfänger: Alle Handelsteilnehmer der Eurex Deutschland und Eurex Zürich sowie Vendoren Autorisiert von: Jürg Spillmann Weitere Informationen zur
MehrVDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen
Mehr