SIMID Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µh Rated current 65 to 800 ma
|
|
- Reinhold Langenberg
- vor 8 Jahren
- Abrufe
Transkript
1 Size 12 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 0 µh Rated current 65 to 800 ma Construction Ceramic or ferrite core Laser-welded winding Flame-retardant encapsulation Features Very wide temperature range (up to 145 C) High Q factor High resonance frequency Suitable for reflow (IR and vapor phase) and wave soldering Applications Filtering of supply voltages, coupling, decoupling Antenna systems Automotive electronics Telecommunications Terminals Electro-plated 0,4 µm Cu, 1 2 µm Ag, 5 7 µm Sn Base material CuSn6 Suitable for soldering and conductive adhesion No leaching during wave soldering Marking Marking on component: Manufacturer, L value (in nh) and tolerance of L value (coded), date of manufacture (coded) Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 180-mm or 330-mm reel For details on taping, packing and packing units see page /00
2 General technical data Rated inductance L R Measured with impedance analyzer HP 4194A at frequency f L Q factor Q min Measured with impedance analyzer HP 4194A/HP 4291A at frequency f Q Rated current I R Maximum permissible dc with inductance decrease L/L 0 % and temperature increase of 20 K at rated temperature of 125 C Self-resonance frequency f res, min Measured with network analyzer HP 8753 DC resistance R max Measured at 20 C ambient temperature, measuring current < I R Climatic category In accordance with IEC /125/56 ( 55 C/+ 125 C/56 days damp heat test) Solderability In accordance with IEC (215 ± 3) C, (3 ± 0,3) s Wetting of soldering area: 90 % Resistance to soldering heat In accordance with IEC C, s L/L ± 3% Permissible PCB bending 2 mm (0 mm long standard PCB) Weight Approx. 50 mg 0 04/00
3 Dimensional drawing 0,5±0,2 1) 2±0,1 1) 3,2+0,3 2±0,1 0,4 min. 1) 0,15 max. 2,5+0,3 Marking 1) Soldering area, tinned IND0063-T-E Layout recommendation A B C D B SSB1227-Z Dimensions (mm) A B C D Wave soldering 2,3 1,60 2,1 5,3 Reflow soldering 2,7 1,15 2,1 4,4 1 04/00
4 Characteristics and ordering codes L R Tolerance MHz MHz ma Ω MHz ( 180-mm reel) f L Q min f Q I R R max f res, min Ordering code 2) µh Core material: ceramics 0,0082 ± 5 % , B82422-A ,0 ^ J , B82422-A ,012 ± % , 3500 B82422-A ,015 ^ K , B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , ,24 50 B82422-A , ,26 00 B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , , B82422-A , ,3 580 B82422-A , ,4 540 B82422-A , ,2 480 B82422-A , ,2 400 B82422-A , ,4 280 B82422-A , ,5 240 B82422-A ) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance. For reel size 330 mm append code number»8«. Example: B82422-A3829-K8 2 04/00
5 Characteristics and ordering codes (continued) L R Tolerance MHz MHz ma Ω MHz ( 180-mm reel) f L Q min f Q I R R max f res, min Ordering code 2) µh Core material: ferrite 1,0 ± 5 % , , B82422-A ,2 ^ J , , B82422-A ,5 ± % , , B82422-A ,8 ^ K , , B82422-A , , , B82422-A , , ,88 1 B82422-A , , ,20 1 B82422-A , , ,40 1 B82422-A , , ,20 1 B82422-A , , ,60 0 B82422-A , , ,80 90 B82422-A , , ,00 90 B82422-A , ,60 25 B82422-A ,1 27 2, ,65 23 B82422-A ,1 27 2, ,85 20 B82422-A ,1 27 2, ,00 17 B82422-A ,1 27 2, ,65 16 B82422-A ,1 27 2, ,70 15 B82422-A ,1 27 2,52 5 4,50 13 B82422-A ,1 27 2, ,30 12 B82422-A ,1 27 2, ,00 11 B82422-A ,1 27 2, ,75 9 B82422-A ,1 27 2, ,70 9 B82422-A ,1 27 2,52 70,0 8 B82422-A ,1 27 2, ,5 7 B82422-A ) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance. For reel size 330 mm append code number»8«. Example: B82422-A12-K8 3 04/00
6 Impedance Z versus frequency f measured with impedance analyzer HP 4291A Z 5 Ω 4 SSB Inductance L versus dc load current I DC measured with LCR meter HP 4275A _ µ H µ H 1 µ H 0 nh nh 6 khz f Q factor versus frequency f measured with impedance analyzer HP 4194A / HP 4291A Current derating I op /I R versus ambient temperature T A I op Ι B 1,2 SSB1450-B I R Ι 1,0 0,8 0,6 0,4 0, C 160 TA 4 04/00
7 Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach , München, DEUTSCHLAND ( , FAX (0 89) EPCOS AG Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box , Munich, GERMANY ( , FAX (0 89) EPCOS AG Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
MehrOvercurrent Protection Leaded Disks, Coated, 12 V, 24 V
B99* C 93 C 99 Applications Overcurrent and short-circuit protection b 3, max. Features Lead-free terminals Manufacturer s logo and type designation stamped on in white Low resistance For rated currents
MehrSensors Motor Protection, Triple Sensors
B900 M 00 Applications Thermal protection of winding in electric motors Limit temperature monitoring Features Thermistor pellets with insulating encapsulation in series connection (triple sensor) Low-resistance
MehrSMD Varistors Monolithic; Standard Series
Construction Cylindrical varistor element, encapsulated Encapsulation: thermoplast, flame-retardant to UL 94-0 Termination: tinned copper alloy Features Electrical equivalents to leaded types S05/S07 up
MehrP V W/set N / 20 % 2530 B66317-G-X130 N / 20 % < 0,59
Core B66317 In accordance with IEC 61246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A = 1,1 mm 1 l e = 57,5 mm A e = 52,5 mm 2 A min = 51,5 mm 2 V e = 3 020 mm 3 Approx.
MehrETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
MehrP V W/set N / 20 % 2460 B66311-G-X130 N / 20 % < 0,27
Core B663 In accordance with IEC 6246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A =,44 mm l e = 46,3 mm A e = 32, mm 2 A min = 3,9 mm 2 V e = 490 mm 3 Approx. weight 7,3
MehrDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant
MehrEP 13. Magnetic characteristics (per set) Σl/A = 1,24 mm 1 l e = 24,2 mm A e = 19,5 mm 2 A min = 14,9 mm 2 V e = 472 mm 3. Approx.
Core B65843 In accordance with IEC 61596 For transformers featuring high inductance and low overall height For power applications EP cores are supplied in sets Magnetic characteristics (per set) Σl/A =
MehrP 4,6 4,1. Magnetic characteristics (per set) Σl/A = 2,6 mm 1 l e = 7,6 mm A e = 2,8 mm 2 V e = 21,3 mm 3. Approx. weight 0,17 g/set.
Core B65495 Miniature pot cores for adjustable miniature inductors One of the two cores is equipped with an internal thread for the adjusting screw The unit can be fixed to the terminal carrier by glue
Mehrmm 1 mm mm 2 mm 3 P V
Core B6553 In accordance with IEC 6033 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole,0 5,9 5,9 252,0 Approx. weight (per set) without center
MehrB81133 X2 MKT/SH 40/100/21/C B81133 X2 MKT/SH 40/100/21/C. EMI Suppression Capacitors X2 / 275 Vac Not for new design
EMI Suppression Capacitors X2 / X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz 1) Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy
MehrSingle-Ended Capacitors Very Low Impedance 105 C B41858
Single-Ended Capacitors Very Low Impedance 5 C Long-life grade capacitors for professional applications Applications For use in output circuits of switch-mode power supplies of compact design For professional
MehrThe following products presented in this data sheet are being withdrawn. B66307F0000X142 B66307F0000X
E/ELP Cores Series/Type: E 16/8/5 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66307F0000X142
MehrThe following products presented in this data sheet are being withdrawn. B65816D
RM Cores Series/Type: RM 12 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B65816D20050000
Mehrmm 1 mm mm 2 mm 3 µ e Ordering code
Core B65517 In accordance with IEC 60133 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole 1,25 12,2 9,8 120 without center hole 1,13 13,4 11,9 9,3
Mehrfor Converters and Power Electronics
or Converters and Power Electronics Power line ilters or single-phase systems Rated voltage 25 V~, 5/ Hz Rated current 8 A to 25 A Construction Two-line ilter Metal case Features Very high insertion loss
MehrEMI Suppression Capacitors X2 / 275 Vac
EMI Suppression Capacitors X2 / B81130 X2 capacitors with very small dimensions Rated ac voltage 275 V, 50/60 Hz Construction ielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing,
Mehr3-Line Filters for Converters and Power Electronics B84143-G*-R110 B84143-G*-R112
B8443-G*-R0 B8443-G*-R2 Power line filters for three-phase systems Rated voltage 4/275 and 520/300 V~, 50/ Hz Rated current 8 to 220 A Construction Three-line filter Metal case Book size Features High
MehrETD 29/16/10 Core B66358 _ 9,8 0,6
Core ETD 29/16/10 through ETD 59/31/22 In accordance with IEC 61185 For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied as single units Magnetic characteristics
MehrETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
MehrEMI Suppression Capacitors Y2 / 250 Vac
EMI Suppression Capacitors Y2 / B81122 Y2 capacitors Rated ac voltage 250 V, 50/60 Hz Construction Dielectric: for = 10 mm: polyester (MKT), for 15 mm: polypropylene (MKP) Internal series connection (for
MehrThe following products presented in this data sheet are being withdrawn. B66414B6008T002 2003-08-08 2004-02-29 2004-08-31
EFD/EV/DE Cores Series/Type: EFD /8/ The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66B6008T002
Mehrmm 1 mm mm 2 mm 3 P V
Core B65671 In accordance with IEC 60133 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e Approx. weight (per set) Gapped with center hole 0,4 37,2 93 76,5 3 460
MehrSIFI-A Series. SIFI-A for normal insertion loss Rated voltage 250 V~, 50/60 Hz Rated current 1 A to 20 A
2-ine Filters SIFI- Series 4111 SIFI- for normal insertion loss Rated voltage 2 V~, / Hz Rated current 1 to Construction Two-line filter Metal case Polyurethane potting (U 94 V-) Features Compact design
Mehrfor Installations and Systems
or Installations and Systems Power line ilters or three-phase systems Rated voltage 4/25 V~, 5/ Hz Rated voltage 6 to 125 A Construction Four-line ilter Metal case Features High insertion loss Compact,
MehrThe following products presented in this data sheet are being withdrawn.
RM Cores Series/Type: RM 10 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B65814N1011D001
MehrThe following products presented in this data sheet are being withdrawn. B66305F0000X142 B66305F0000X
E/ELP Cores Series/Type: E 13/7/4 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66305F0000X142
MehrB45196-H, B45198-H. Tantalum Chip Capacitors HighCap
Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features Ultra-high volumetric efficiency Excellent solderability
MehrB45192, B Tantalum Chip Capacitors Low Profile, H max = 1,5 mm; Standard and Low ESR
New series Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Maximum height 1,5 mm Features High volumetric
MehrFerrites and Accessories
Ferrites and Accessories Series/Type: RM 4 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments
Mehr3-Line Filters for Converters and Power Electronics B84143-B*-R110 B84143-B*-R112
B83-B*-R Power line ilters or three-phase systems Rated voltage /275 and 5/ V~, / Hz Rated current 8 to A Construction Three-line ilter Metal case Book size Features Very high insertion loss Low leakage
MehrB45194, B Tantalum Chip Capacitors Low Profile, H max = 2 mm; Standard and Low ESR
New series Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Maximum height 2,0 mm Features High volumetric
MehrSMD Varistors MLV; Telecom Series
ML; Telecom Series Construction Multilayer technology Termination: nickel barrier (CT series) or silver palladium (CN series) No plastic or epoxy encapsulation assures better than UL 94-0 flaability rating
MehrPM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 14 x 8 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
MehrPM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 36 x 22 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
MehrOvercurrent Protection Leaded Disks, Uncoated, 380 V to 1000 V
Leaded Dik, Uncoated, 38 V to V B97** B 7 B 774 Application Overcurrent and hort-circuit protection Feature Lead-free terminal Manufacturer logo, date code and type deignation tamped on in black UL approval
MehrSwitching Applications PTC Thermistors in Plastic Case, 63 V to 220 V
Switching Application PTC Thermitor in Platic Cae, 63 V to 22 V J 28... J 29 Application Delayed witching of load For frequent witching 6,3 max. 6,3 max. Feature Encaed thermitor dik with clamp contact
MehrPM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 18 x 11 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
MehrCapacitors with Screw Terminals
Capacitors with Screw Terminals 105 C B 41 560, B 41 580 LL grade Compact low-voltage type For professional power supplies Construction Charge-discharge proof, polar luminum case with insulating sleeve
MehrEMV-Bauelemente EMC Components
EMV-Bauelemente EMC Components SIMIDs werden für die nieder- und hochfrequente Entkopplung von Signal- und Steuerkreisen sowie zum Aufbau von Schwingkreisen eingesetzt. Typische Anwendungsgebiete sind:
MehrThe following products presented in this data sheet are being withdrawn.
RM Cores Series/Type: RM The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B80C0000R0 B80C0000R048
MehrSMT Chipinduktivitäten SMT Chip Inductors. Baugröße / Size 1008 (2520) Serie / Series compliant
SMT Chipinduktivitäten SMT Chip Inductors compliant Baugröße / Size 18 (252) Serie / Series 551-4 - Allgemeine Eigenschaften und technische Informationen zu den en SMD-Spulen Die Baugröße 18 verbindet
MehrDickfilm-Widerstände Thick-Film Resistors
Dickfilm-Widerstände Thick-Film Resistors Dickfilm-Widerstände werden universell eingesetzt: in der Uhrenindustrie, Kommunikations-/Datentechnik,... bis hin zur Kfz-Elektronik. Verwendung finden die Baugrößen
Mehr0603 (1608) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 (1608) wire-wound (AgPd/Ni/Sn Metallisation)
compliant 0603 (1608) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 (1608) wire-wound (AgPd/Ni/Sn Metallisation) - 18 - Allgemeine Eigenschaften zu den drahtgewickelten SMD-Spulen Bauform 0603 / Baureihe
Mehr0805 (2012) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0805 (2012) wire-wound (AgPd/Ni/Sn Metallisation)
complaint 85 (212) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 85 (212) wire-wound (AgPd/Ni/Sn Metallisation) - 34 - Allgemeine Eigenschaften und technische Informationen zu den drahtgewickelten SMD-Spulen
MehrSMT Chipinduktivitäten SMT Chip Inductors. Baugröße / Size 1812 (4532) Serie / Series 5309, compliant
SMT Chipinduktivitäten SMT Chip Inductors compliant Baugröße / Size 1812 (4532) Serie / Series 539, 559-56 - Allgemeine Eigenschaften und technische Informationen zu den en SMD-Spulen Mit der Baugröße
MehrSMT Chipinduktivitäten SMT Chip Inductors. Baugröße / Size 0603 (1608) Serie / Series compliant
SMT Chipinduktivitäten SMT Chip Inductors compliant Baugröße / Size 0603 (1608) Serie / Series 5406-24 - Allgemeine Eigenschaften zu den en SMD-Spulen SUMIDA Components e Chipspulen der Baugröße 0603 werden
Mehr336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
MehrSpezifikation für Freigabe / specification for release
@@FRM 1@@ Spezifikation für Freigabe / specification for release : A Mechanische Abmessungen / dimensions: Größe / size 1008 A 2,5 ± 0,2 mm B 2,0 ± 0,2 mm C 1,0 (max.) mm D 0,5 ± 0,3 mm B Elektrische Eigenschaften
MehrHochkonstante Keramik-HF-Spulen Highly Constant Ceramic RF Coils
Hochkonstante Keramik-HF-Spulen Highly Constant Ceramic RF Coils Inhaltsverzeichnis / Contents Seite / Page Festinduktivitäten für gedruckte Schaltungen 116-126 Fixed Inductances for PC Boards Zertifiziertes
Mehr0603 drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 wire-wound (AgPd/Ni/Sn Metallisation)
0603 drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 wire-wound (AgPd/Ni/Sn Metallisation) - 22 - Allgemeine Eigenschaften zu den drahtgewickelten SMD-Spulen Bauform 0603 / Baureihe 5406 STELCO erweitert
MehrTaster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
MehrKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MehrSPINNER MOBILE COMMUNICATION
KOAXIALE ABSCHLUSSWIDERSTÄNDE & DÄMPFUNGSGLIEDER COAXIAL LOADS & ATTENUATORS Abschlusswiderstände übernehmen häufig die Funktion einer Antenne während der Test- oder Einmessphase einer Mobilfunk-Basisstation.
MehrSpezifikation für Freigabe / specification for release
@@FRM 1@@ Spezifikation für Freigabe / specification for release : Artikelnuer / part number : A Mechanische Abmessungen / dimensions : DATUM / DATE : 100 BaseT A B A B C D 12,80 ± 0,25 6,00 max. 9,3 ±
MehrLS3/5A customer questionnaire
LS3/5A customer questionnaire LS3/5A BBC original 15 Ω Autotrafo 3 4 5 6 2 TAP SELECTOR 7 C 2A C 2B LOW INPUT HIGH BBC Original Version KEF B110 [SP1003) 8Ω Spendor Original Layout Please check the xover
MehrDatenblatt. P-series PDU 2.5/4/4AN
Turn five into three that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means
MehrElectrical tests on Bosch unit injectors
Valid for Bosch unit injectors with order numbers 0 414 700 / 0 414 701 / 0 414 702 Parts Kit Magnet*: - F00H.N37.925 - F00H.N37.933 - F00H.N37.934 * For allocation to the 10-place Bosch order number,
MehrFMC. 52 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
Mehrbis 2000 m mit 1% Leistungsreduz. pro 100 m up to 2000 m 1% derating per 100 m Normen / Standards IEC (2006-5), UL 508 1)
Kundenspezifische, unterbaufähige Netzdrosseln für Siemens-Umrichter der Serien SINAMICS GC und G mit Leistungsmodul PM240-2 (Standard-Variante). Die Drosseln sind seitlich ohne Abstand anreihbar. Line
Mehr1 Title Detail specification for high screened coaxial RF-cable with tin soaked braid. Generic specification: IEC , IEC
ELCRIGID SN 39 225 E with tin soaked braid Seite 1 v 6 1 Title Detail specification for high screened coaxial RF-cable with tin soaked braid 2 Specifications Generic specification: IEC 61196-1, IEC 60096-0-1
MehrOverview thermostat/ temperature controller
Thermostat TR-238 The Thermostat TR-238 is a electronic two-level controller for controlling of and in climate control units and vehicles. Voltage range (12V): Voltage range (24V): Control range: Hystereses:
MehrCode for Special Contacts Nummernschlüssel für Sonderkontakte
Code for Special Nummernschlüssel für Sonderkontakte Ordering Code Bestellschlüssel Series Features Baureihen-Features FDX-Series FDX-Serie Coaxial contact for cable termination Inner conductor for solder
MehrHochstromkontakte High Power Contacts
Hochstromkontakte High Power Contacts Technische Daten Technical Data Mechanische Daten Mechanical Data Steckkraft (Kontaktpaar) Mating force (pair of contacts) Ziehkraft Unmating force Temperaturbereich
MehrICL Series Rail-Mount Hydraulic Magnetic Circuit Breaker
Ihr autorisierter Distributor: Neumüller Elektronik GmbH info@hq-schutzschalter.de ICL Series Rail-Mount Hydraulic Magnetic Circuit Breaker Introduction 133 Configurations 134 Operating Characteristics
Mehr312LR, 412LR Series Max. Ripple, Extra Long Life > h / 105 C Snap-In
Anwendungen und Merkmale / Applications and Features Professionelle Stromversorgungen Professional power supplies Servoantriebe und Solarumrichter Servo drives and solar inverters Höchste Wechselstrombelastbarkeit
Mehr2F1000-xxx to 350 A, DC-EMV-Filter / DC EMI Filters
Application and performance characteristics Typically used to comply with EMC emission standards Reduce conducted emissions over the frequency range 150 khz to 30 MHz Suitable for Industrial, Railway,
MehrD-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
MehrHochstrom-Druckkontakte für Dauerströme bis 400 A. High Current Probes up to 400 amps cont. Ausgabe 7/2009 DE EN. Edition 7/2009 DE EN
Hochstrom-Druckkontakte für Dauerströme bis 400 usgabe 7/2009 DE EN High Current Probes up to 400 amps cont. Edition 7/2009 DE EN Impressum und Bestellhinweise Company and Ordering Information Unsere
MehrTechnical Terms Technische Daten: Operating voltage Betriebsspannungsbereich Rated Voltage Nennspannung
Technical Terms Technische Daten: Operating voltage Betriebsspannungsbereich Rated Voltage Nennspannung 4...7 V 5 V *) Rated Current Nennstrom < 50 ma Sound Output [SPL]at 10 cm Lautstärke[Schalldruckpegel]
Mehr"Low Cost" Linear-Speicherdrosseln Speicherenergie ½ L I² 0,5mWs, 0,75mWs, 1,5mWs und 2,5mWs
"ow Cost" inear-speicherdrosseln Speicherenergie ½ I² 0,mWs, 0,7mWs, 1,mWs und 2,mWs "ow Cost" inear Storage-Chokes Storage capacity ½ I² 0,mWs, 0,7mWs, 1,mWs and 2,mWs Für moderne Stromversorgungen müssen
MehrCloud for Customer Learning Resources. Customer
Cloud for Customer Learning Resources Customer Business Center Logon to Business Center for Cloud Solutions from SAP & choose Cloud for Customer https://www.sme.sap.com/irj/sme/ 2013 SAP AG or an SAP affiliate
MehrInductors for Power Electronics Induktivitäten für die Leistungselektronik
EN DE 2015/16 Edition 1 Ausgabe 1 Inductors for Power Electronics Induktivitäten für die Leistungselektronik BLOCK custom and standard products BLOCK Sonderlösungen und Standardprodukte inductors MADE
MehrOpto Semiconductors. Vorläufige Daten / Preliminary Data
CHIPLED Vorläufige Daten / Preliminary Data Besondere Merkmale SMT-Gehäusetyp: 63 Farben: grün (572 nm), gelb (59 nm) Abstrahlcharakteristik: extrem breit (16 ) Industriestandard bzgl. Lötpadraster geringe
MehrMotorenreihe Einphasen Wechselstrom
Einphasen Wechselstrommotorensingle phase motors enreihe Einphasen Wechselstrom line single-phase Eckdaten Key data n s Gehäusematerial Frame material Number of poles Leistung Output 63 bis 100 63 to 100
MehrSMT Connectors SMT Steckverbinder. Ordering Code Bestellschlüssel
SMT Connectors SMT Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 21 Special Features Besondere
MehrHändler Preisliste Trade Price List 2015
Händler Preisliste Trade Price List 2015 gültig ab / valid from 01.03.2015 Qualität die verbindet Driven by Quality Sehr geehrter Kunde, zu unserer neuen Preisliste möchten wir Ihnen nachfolgend einige
MehrSMC, 50 Ω. Features. Product Range
I I 11SMC, 50 Ω Interface Dimensions SMC, 50 Ω Code 39 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene L F G D F D B A E C H K H C E A B MALE Stecker FEMALE Kuppler G SMC, 50 Ω Male Stecker
MehrBleifreie Bauteile bei Diotec Lead Free Products at Diotec
Bleifreie Bauteile bei Diotec Lead Free Products at Diotec 1 Bleifreie Bauteile Gesetzliche Grundlage Leadfree Devices Legislation 2 Ausnahmeregelungen in den Richtlinien, Bsp. 2002/95/EG - ROHS Exemptions
MehrGesamtübersicht Ringkerndrosseln. summary toroidal-chokes. Tauscher Transformatoren
für Anwendungen bei höheren Frequenzen bis 00 khz Einsatzmöglichkeiten Siebdrosseln und Speicherdrosseln in Schaltnetzteilen, Funkentstördrosseln für DC versorgte Geräte, EMV - Drosseln, PFC - Drosseln,
MehrHU4 / HU5 S p I 6000h / 105 C
HU4 / HU5 S p I 6000h / 105 C Spezifikationen / Specifications Items Characteristics Temperaturbereich / Temperature range -40 C ~ + 105 C / Rated voltage 200V - 450V Spitzenspannung / Surge voltage 30
Mehr+ + Darf es ein bisschen mehr sein? May it be a little more? Kompakt III. Der Klassiker The classic. + Ultra compact 87 x 54 x 26 mm
Ultrakompakt 87 x 54 x 26 mm + Ultra compact 87 x 54 x 26 mm + + Bis zu 57 W oder 2 x 27 W Up to 57 W or 2 x 27 W Einzigartig klein Unique small size Der Klassiker The classic Darf es ein bisschen mehr
MehrDurchführungskondensatoren mit Anschlußdraht Feedthrough capacitors with pin. Baureihe / Series
Durchführungskondensatoren mit Anschlußdraht Feedthrough capacitors with pin Baureihe / Series BDBQ 3-01 2709 BUBQ 5-00 2701 BDBQ 5-00 2701 BDBQ 5-12 2701 BDBQ 5-02 2701 LUEQ 6-01 2703 LDEQ 6-01 2703 DDMN
Mehr512LR Series Max. Ripple, Extra Long Life > h / 105 C Snap-In & Solder Pin
Anwendungen und Merkmale / Applications and Features Professionelle Stromversorgungen Professional power supplies Servoantriebe und Solarumrichter Servo drives and solar inverters Höchste Wechselstrombelastbarkeit
MehrAC/DC-Schaltnetzteile 100 W AC/DC Switching Power Supplies 100 W. Merkmale / Features. Eingangsbereich 90...264 V AC
E176177 Merkmale / Features Eingangsbereich 90...264 V AC / Universal Input 90...264 V AC Wirkungsgrad bis zu 90 % / Efficiency up to 90 % Full-Brick Gehäuse / Full Brick Package Aktiv PFC Funktion / Active
MehrProduct Tested Version Release List Annex to certificate Tyco Electronics Austria GmbH Certificate No.: 968/EL 350.06/13
Certificate No.: 968/EL 350.06/13 Beschreibung des Typenschlüssels für SR6 / Description of the Type Nomenclature SR6 Beispiel: Example: I II III I Grundtype Basic series Ausführung ersion Kontaktausführung
MehrDatenblatt / Data sheet
Seite/Page 1/5 Abbildungen / Illustration Maßzeichnung / Dimensions Produktbeschreibung Product specification Kompaktes, steckbares Relais für den industriellen Einsatz. Compact, pluggable relay for industrial
MehrMicro-RF. 294 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
Micro-RF components can be used up to 6 GHz in various wireless applications, e. g. cellular and cordless phones, Bluetooth and wireless LAN applications, PDAs (Personal Digital Assistants) or wireless
MehrLFM (mit 3mm LED) LFM (with T1 LED)
LFM (mit 3mm LED) LFM (with T1 LED) Innenreflektor Internal reflector Abmessungen Dimensions Frontplattenbohrung Frontpanel drilling Technische Daten / Technical data 1. Elektrische Kennwerte / Electrical
MehrChokes and Inductors Drosseln und Induktivitäten
Product Profile 2007 Chokes and Inductors Drosseln und Induktivitäten www.epcos.com Welcome to the World of Electronic Components With its broad portfolio in electronic components EPCOS provides one-stop
MehrSOCKET AND RING Lead (Pb) Free Product - RoHS Compliant. Sleeves and Ring for 3 mm and 5 mm LED. full production
2006-06-12 SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant Sleeves and Ring for 3 mm and 5 mm LED full production Applications Signal lamp for front panel installation using clip mounting and a
MehrWith your design proposals or our available simulation and calculation programs, our R&D department realizes and delivers quick solutions.
HAHN offers solutions for product developers of switching power supplies. In response to the variety of designs which are available on the market, HAHN combines demands and wishes of the developers to
MehrDatenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
MehrCertificate of conformity Generating unit, NS-protection
Applicant: Product: Certificate of conformity Generating unit, NS-protection Schneider Electric Solar Inverters USA, Inc. 250 South Vasco Road Livermore, California 94551 USA Photovoltaic Inverter with
MehrSnap-in Outline Drawings / Snap-in Bauformen
Snap-in Outline Drawings / Snap-in Bauformen C (D = 20 ~ 35mm, short pin T = 4.0 ± 0.5mm) R (D = 20 ~ 35mm, long pin T = 6.3 ± 1.0mm) S (D = 35 ~ 40mm, standard T = 6.3 ± 1.0mm) X (D = 35 ~ 40mm, short
MehrWe are pleased to inform you that the addendum this requires to the existing product approval has now been successfully completed.
MSA AUER GmbH! Thiemannstraße 1! D-12059 Berlin To our customers Name Phone, Fax E-mail Date Malte Kaas (030) 6886-0, -1613 Malte.Kaas@MSAsafety.com 10.12.2014 Duracell MN 1500 Procell Retail availability
MehrCertificate of conformity Generating unit, NS-protection
Certificate of conformity Generating unit, NS-protection Applicant: Product: Schneider Electric Solar Inverters USA, Inc. 250 South Vasco Road Livermore, California 94551 USA Photovoltaic Inverter with
Mehr