SMD Varistors MLV; Telecom Series
|
|
|
- Katharina Dressler
- vor 7 Jahren
- Abrufe
Transkript
1 ML; Telecom Series Construction Multilayer technology Termination: nickel barrier (CT series) or silver palladium (CN series) No plastic or epoxy encapsulation assures better than UL 94-0 flaability rating Features Suitable for handling surge voltages of up to 2 k according to the directives of Germany s telecom administration Suitable for handling the surge current of the 10/700 s pulse to ITU-T and IEC Matched to line conditions with or without superimposed ringing voltage Good solderability Suitable for ESD protection PSpice models Taping Supply on 8/12- tape, for tape dimensions see pages 154/155, for reel dimensions and packing units see page 157, chapter SMD aristors: Taping designation Detailed description of coding system on page 39, chapter General Technical Information EPCOS metal oxide varistor Design Size (nominal) Special tolerance of varistor voltage CT 1812 S 60 G Taping mode Specifies special tolerance () Max. C operating voltage General technical data Climatic category LCT UCT Damp heat, steady state (93 % r.h., 40 C) 55/85/56 40 C + 85 C 56 days in accordance with IEC in accordance with IEC Operating temperature C in accordance with CECC Storage temperature 1) C Response time < 0,5 ns Solderability 235 C, 2 s in accordance with IEC Resistance to soldering heat 260 C, 10 s in accordance with IEC ) For mounted parts (storage conditions for unused parts on reel see page 38, chapter General Technical Information ) /02
2 Telecom Nickel arrier Termination (available upon request) Maximum ratings Notes W max (2 ms) Ordering code RMS DC i (10 ) 10/700 s i max 8/20 s 1) J W CT1812S60G T0600S ,2 0,015 CT1812K75TELEG T6750K ,5 0,015 CT1812S95G T0950S ,8 0,015 CT1812K115TELEG T6111K ,2 0,015 CT1812K130TELEG T6131K ,5 0,015 Characteristics (T = 25 C) v v Max. clamping voltage C typ Derating /I characteristic % v i 1) (1 khz) pf curve Page Page CT1812S60G / CT1812K75TELEG CT1812S95G / CT1812K115TELEG CT1812K130TELEG In addition to the telecom varistors listed above, all varistors of the standard series can be used for telecom applications if the selection criteria are considered. These telecom varistors in multilayer technology are not suitable for the operation on C mains. P max 1) The test circuit according to figure 44 in chapter pplications yields a surge current amplitude of approx /02
3 Telecom Silver Palladium Termination Maximum ratings Notes W max (2 ms) Ordering code RMS DC i (10 ) 10/700 s i max 8/20 s 1) J W CN1812S60G S ,2 0,015 CN1812K75TELEG K ,5 0,015 CN1812S95G S ,8 0,015 CN1812K115TELEG K ,2 0,015 CN1812K130TELEG K ,5 0,015 Characteristics (T = 25 C) v v Max. clamping voltage C typ Derating /I characteristic % v i 1) (1 khz) pf curve Page Page CN1812S60G / CN1812K75TELEG CN1812S95G / CN1812K115TELEG CN1812K130TELEG In addition to the telecom varistors listed above, all varistors of the standard series can be used for telecom applications if the selection criteria are considered. These telecom varistors in multilayer technology are not suitable for the operation on C mains. P max 1) The test circuit according to figure 44 in chapter pplications yields a surge current amplitude of approx /02
4 ML; Telecom Series b h k Dimensions R0406-M Weight: < 0,2 g Termination acc. CECC I b Termination: nickel barrier (CT) or silver palladium (CN) h k CT/CN1812 4,5 0,40 3,20 0,30 2,5 max. 0,25 1,0 C D Recoended solder pad layout R0391-D C CT/CN1812 3,6 1,5 3,0 6,0 D /02
5 Herausgegeben von EPCOS G Unternehmenskounikation, Postfach , München, DEUTSCHLND ( , FX (0 89) EPCOS G ervielfältigung, eröffentlichung, erbreitung und erwertung dieser roschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS G nicht gestattet. estellungen unterliegen den vom ZEI empfohlenen llgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese roschüre ersetzt die vorige usgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen ertrieb der EPCOS G oder an unsere ertriebsgesellschaften im usland. auelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. uskünfte darüber bitten wir unter ngabe des betreffenden Typs ebenfalls über die zuständige ertriebsgesellschaft einzuholen. Published by EPCOS G Corporate Counications, P.O. ox , Munich, GERMNY ( , FX (0 89) EPCOS G Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recoended by the ZEI (German Electrical and Electronic Manufacturers ssociation), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS G or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
SMD Varistors Monolithic; Standard Series
Construction Cylindrical varistor element, encapsulated Encapsulation: thermoplast, flame-retardant to UL 94-0 Termination: tinned copper alloy Features Electrical equivalents to leaded types S05/S07 up
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant
Overcurrent Protection Leaded Disks, Coated, 12 V, 24 V
B99* C 93 C 99 Applications Overcurrent and short-circuit protection b 3, max. Features Lead-free terminals Manufacturer s logo and type designation stamped on in white Low resistance For rated currents
Sensors Motor Protection, Triple Sensors
B900 M 00 Applications Thermal protection of winding in electric motors Limit temperature monitoring Features Thermistor pellets with insulating encapsulation in series connection (triple sensor) Low-resistance
P V W/set N / 20 % 2460 B66311-G-X130 N / 20 % < 0,27
Core B663 In accordance with IEC 6246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A =,44 mm l e = 46,3 mm A e = 32, mm 2 A min = 3,9 mm 2 V e = 490 mm 3 Approx. weight 7,3
P V W/set N / 20 % 2530 B66317-G-X130 N / 20 % < 0,59
Core B66317 In accordance with IEC 61246 E cores are supplied as single units Magnetic characteristics (per set) Σl/A = 1,1 mm 1 l e = 57,5 mm A e = 52,5 mm 2 A min = 51,5 mm 2 V e = 3 020 mm 3 Approx.
ETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
mm 1 mm mm 2 mm 3 P V
Core B6553 In accordance with IEC 6033 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole,0 5,9 5,9 252,0 Approx. weight (per set) without center
EP 13. Magnetic characteristics (per set) Σl/A = 1,24 mm 1 l e = 24,2 mm A e = 19,5 mm 2 A min = 14,9 mm 2 V e = 472 mm 3. Approx.
Core B65843 In accordance with IEC 61596 For transformers featuring high inductance and low overall height For power applications EP cores are supplied in sets Magnetic characteristics (per set) Σl/A =
P 4,6 4,1. Magnetic characteristics (per set) Σl/A = 2,6 mm 1 l e = 7,6 mm A e = 2,8 mm 2 V e = 21,3 mm 3. Approx. weight 0,17 g/set.
Core B65495 Miniature pot cores for adjustable miniature inductors One of the two cores is equipped with an internal thread for the adjusting screw The unit can be fixed to the terminal carrier by glue
mm 1 mm mm 2 mm 3 µ e Ordering code
Core B65517 In accordance with IEC 60133 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole 1,25 12,2 9,8 120 without center hole 1,13 13,4 11,9 9,3
mm 1 mm mm 2 mm 3 P V
Core B65671 In accordance with IEC 60133 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e Approx. weight (per set) Gapped with center hole 0,4 37,2 93 76,5 3 460
The following products presented in this data sheet are being withdrawn. B66307F0000X142 B66307F0000X
E/ELP Cores Series/Type: E 16/8/5 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66307F0000X142
SIMID 1210-100. Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µh Rated current 65 to 800 ma
Size 12 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 0 µh Rated current 65 to 800 ma Construction Ceramic or ferrite core Laser-welded winding Flame-retardant encapsulation Features Very wide temperature
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
ETD 29/16/10 Core B66358 _ 9,8 0,6
Core ETD 29/16/10 through ETD 59/31/22 In accordance with IEC 61185 For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied as single units Magnetic characteristics
Single-Ended Capacitors Very Low Impedance 105 C B41858
Single-Ended Capacitors Very Low Impedance 5 C Long-life grade capacitors for professional applications Applications For use in output circuits of switch-mode power supplies of compact design For professional
ETD 34/17/11. Magnetic characteristics (per set) Σl/A = 0,81 mm 1 l e = 78,6 mm A e = 97,1 mm 2 A min = 91,6 mm 2 V e = mm 3
Core B66361 In accordance with IEC 61185 Quality assurance per UTE 83313-001/ CECC 25 301-001 (material N27) For SMPS transformers with optimum weight/performance ratio at small volume ETD cores are supplied
The following products presented in this data sheet are being withdrawn. B65816D
RM Cores Series/Type: RM 12 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B65816D20050000
SIFI-A Series. SIFI-A for normal insertion loss Rated voltage 250 V~, 50/60 Hz Rated current 1 A to 20 A
2-ine Filters SIFI- Series 4111 SIFI- for normal insertion loss Rated voltage 2 V~, / Hz Rated current 1 to Construction Two-line filter Metal case Polyurethane potting (U 94 V-) Features Compact design
EMI Suppression Capacitors X2 / 275 Vac
EMI Suppression Capacitors X2 / B81130 X2 capacitors with very small dimensions Rated ac voltage 275 V, 50/60 Hz Construction ielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing,
for Converters and Power Electronics
or Converters and Power Electronics Power line ilters or single-phase systems Rated voltage 25 V~, 5/ Hz Rated current 8 A to 25 A Construction Two-line ilter Metal case Features Very high insertion loss
The following products presented in this data sheet are being withdrawn. B66305F0000X142 B66305F0000X
E/ELP Cores Series/Type: E 13/7/4 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66305F0000X142
EMI Suppression Capacitors Y2 / 250 Vac
EMI Suppression Capacitors Y2 / B81122 Y2 capacitors Rated ac voltage 250 V, 50/60 Hz Construction Dielectric: for = 10 mm: polyester (MKT), for 15 mm: polypropylene (MKP) Internal series connection (for
PM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 36 x 22 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
PM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 14 x 8 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
The following products presented in this data sheet are being withdrawn.
RM Cores Series/Type: RM 10 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B65814N1011D001
B81133 X2 MKT/SH 40/100/21/C B81133 X2 MKT/SH 40/100/21/C. EMI Suppression Capacitors X2 / 275 Vac Not for new design
EMI Suppression Capacitors X2 / X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz 1) Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy
Ferrites and Accessories
Ferrites and Accessories Series/Type: RM 4 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments
for Installations and Systems
or Installations and Systems Power line ilters or three-phase systems Rated voltage 4/25 V~, 5/ Hz Rated voltage 6 to 125 A Construction Four-line ilter Metal case Features High insertion loss Compact,
PM/P/P Cores Halves/EP/TT/PR Cores
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 18 x 11 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders
B45192, B Tantalum Chip Capacitors Low Profile, H max = 1,5 mm; Standard and Low ESR
New series Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Maximum height 1,5 mm Features High volumetric
B45196-H, B45198-H. Tantalum Chip Capacitors HighCap
Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features Ultra-high volumetric efficiency Excellent solderability
3-Line Filters for Converters and Power Electronics B84143-G*-R110 B84143-G*-R112
B8443-G*-R0 B8443-G*-R2 Power line filters for three-phase systems Rated voltage 4/275 and 520/300 V~, 50/ Hz Rated current 8 to 220 A Construction Three-line filter Metal case Book size Features High
Capacitors with Screw Terminals
Capacitors with Screw Terminals 105 C B 41 560, B 41 580 LL grade Compact low-voltage type For professional power supplies Construction Charge-discharge proof, polar luminum case with insulating sleeve
B45194, B Tantalum Chip Capacitors Low Profile, H max = 2 mm; Standard and Low ESR
New series Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Maximum height 2,0 mm Features High volumetric
3-Line Filters for Converters and Power Electronics B84143-B*-R110 B84143-B*-R112
B83-B*-R Power line ilters or three-phase systems Rated voltage /275 and 5/ V~, / Hz Rated current 8 to A Construction Three-line ilter Metal case Book size Features Very high insertion loss Low leakage
The following products presented in this data sheet are being withdrawn. B66414B6008T002 2003-08-08 2004-02-29 2004-08-31
EFD/EV/DE Cores Series/Type: EFD /8/ The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66B6008T002
Overcurrent Protection Leaded Disks, Uncoated, 380 V to 1000 V
Leaded Dik, Uncoated, 38 V to V B97** B 7 B 774 Application Overcurrent and hort-circuit protection Feature Lead-free terminal Manufacturer logo, date code and type deignation tamped on in black UL approval
Switching Applications PTC Thermistors in Plastic Case, 63 V to 220 V
Switching Application PTC Thermitor in Platic Cae, 63 V to 22 V J 28... J 29 Application Delayed witching of load For frequent witching 6,3 max. 6,3 max. Feature Encaed thermitor dik with clamp contact
Dickfilm-Widerstände Thick-Film Resistors
Dickfilm-Widerstände Thick-Film Resistors Dickfilm-Widerstände werden universell eingesetzt: in der Uhrenindustrie, Kommunikations-/Datentechnik,... bis hin zur Kfz-Elektronik. Verwendung finden die Baugrößen
The following products presented in this data sheet are being withdrawn.
RM Cores Series/Type: RM The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B80C0000R0 B80C0000R048
SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant. Sleeves and Ring for 3 mm and 5 mm LED. full production
2006-06-12 SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant Sleeves and Ring for 3 mm and 5 mm LED full production Applications Signal lamp for front panel installation using clip mounting and a
EMV-Bauelemente EMC Components
EMV-Bauelemente EMC Components SIMIDs werden für die nieder- und hochfrequente Entkopplung von Signal- und Steuerkreisen sowie zum Aufbau von Schwingkreisen eingesetzt. Typische Anwendungsgebiete sind:
Semiconductors designed. Assembly methods: hand made parts Verarbeitungsmethode: Handbestückung
2006-06-12 Enstackable clips Lead (Pb) Free Product - RoHS Compliant Enstackable clips for 3 mm and 5 mm LED (black) full production Features: Besondere Merkmale: Package: enstackable clips for 3 mm and
Reflector Lead (Pb) Free Product - RoHS Compliant. Reflector for 3 mm and 5 mm LED (silver) full production
2006-06-12 Reflector Lead (Pb) Free Product - RoHS Compliant Reflector for 3 mm and 5 mm LED (silver) full production Features: Besondere Merkmale: Package: reflector for 3 mm and 5 mm LED, Gehäusetyp:
Certificate of conformity Generating unit, NS-protection
Applicant: Product: Certificate of conformity Generating unit, NS-protection Schneider Electric Solar Inverters USA, Inc. 250 South Vasco Road Livermore, California 94551 USA Photovoltaic Inverter with
ICL Series Rail-Mount Hydraulic Magnetic Circuit Breaker
Ihr autorisierter Distributor: Neumüller Elektronik GmbH info@hq-schutzschalter.de ICL Series Rail-Mount Hydraulic Magnetic Circuit Breaker Introduction 133 Configurations 134 Operating Characteristics
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Datenblatt. P-series PDU 2.5/4/4AN
Turn five into three that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means
Certificate of conformity Generating unit, NS-protection
Certificate of conformity Generating unit, NS-protection Applicant: Product: Schneider Electric Solar Inverters USA, Inc. 250 South Vasco Road Livermore, California 94551 USA Photovoltaic Inverter with
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder Technical Data Technische Daten Mechanical Data Mechanische Daten Shell Gehäuse Insulator Isolierkörper Signal contacts Signalkontakte
DatasheetArchive.com. Request For Quotation
DatasheetArchive.com Request For Quotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative
Code for Special Contacts Nummernschlüssel für Sonderkontakte
Code for Special Nummernschlüssel für Sonderkontakte Ordering Code Bestellschlüssel Series Features Baureihen-Features FDX-Series FDX-Serie Coaxial contact for cable termination Inner conductor for solder
SMT Chipinduktivitäten SMT Chip Inductors. Baugröße / Size 1008 (2520) Serie / Series compliant
SMT Chipinduktivitäten SMT Chip Inductors compliant Baugröße / Size 18 (252) Serie / Series 551-4 - Allgemeine Eigenschaften und technische Informationen zu den en SMD-Spulen Die Baugröße 18 verbindet
0805 (2012) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0805 (2012) wire-wound (AgPd/Ni/Sn Metallisation)
complaint 85 (212) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 85 (212) wire-wound (AgPd/Ni/Sn Metallisation) - 34 - Allgemeine Eigenschaften und technische Informationen zu den drahtgewickelten SMD-Spulen
SMT Connectors SMT Steckverbinder. Ordering Code Bestellschlüssel
SMT Connectors SMT Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 21 Special Features Besondere
SMT Chipinduktivitäten SMT Chip Inductors. Baugröße / Size 1812 (4532) Serie / Series 5309, compliant
SMT Chipinduktivitäten SMT Chip Inductors compliant Baugröße / Size 1812 (4532) Serie / Series 539, 559-56 - Allgemeine Eigenschaften und technische Informationen zu den en SMD-Spulen Mit der Baugröße
2F1000-xxx to 350 A, DC-EMV-Filter / DC EMI Filters
Application and performance characteristics Typically used to comply with EMC emission standards Reduce conducted emissions over the frequency range 150 khz to 30 MHz Suitable for Industrial, Railway,
EN (DIN
Amphenol Amphenol-Tuchel Electronics GmbH Rundsteckverbinder Circular Connectors Rundsteckverbinder entspricht EN 17 5000 (DIN 4 56) Die Rundsteckverbinder der Serie entsprechen den Anforderungen der EN
Technische Information / Technical Information
Elektrische Eigenschaften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Spitzensperrspannung T vj = - 40 C...T vj max V RRM 1200, 1400 V repetitive peak reverse voltage
We are pleased to inform you that the addendum this requires to the existing product approval has now been successfully completed.
MSA AUER GmbH! Thiemannstraße 1! D-12059 Berlin To our customers Name Phone, Fax E-mail Date Malte Kaas (030) 6886-0, -1613 Malte.Kaas@MSAsafety.com 10.12.2014 Duracell MN 1500 Procell Retail availability
ZnO-Arresters for Overvoltage Protection in Pulsed Power Circuits
European Electromagnetic Launch Society 12th Topical Meeting 10th to 12th September 2001, Ayr ZnO-Arresters for Overvoltage Protection in Pulsed Power Circuits Ulrich Braunsberger Institut für Hochspannungstechnik
SMT Chipinduktivitäten SMT Chip Inductors. Baugröße / Size 0603 (1608) Serie / Series compliant
SMT Chipinduktivitäten SMT Chip Inductors compliant Baugröße / Size 0603 (1608) Serie / Series 5406-24 - Allgemeine Eigenschaften zu den en SMD-Spulen SUMIDA Components e Chipspulen der Baugröße 0603 werden
Electromagnetic Flowmeter FXE4000-DE43F
Pos: 2 /Grid-Layout/Titelblätter/Ersatzteilblätter/Durchfluss/FXE4000-DE43F @ 65\mod_1350460748604_3101.docx @ 523546 @ @ 1 === Ende der Liste für Textmarke Cover === Spare Parts List SPL/FXE4000-DE43F-EN
Datenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
DatasheetArchive.com. Request For Quotation
DatasheetArchive.com Request For Quotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative
Evidence of Performance
Air permeability, Watertightness, Resistance to wind load, Operating forces, Mechanical properties, Mechanical durability, Impact resistance Expert Statement No. 15-002226-PR01 (02) Product Designation
Catalog ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH. PO Box 1631 D Bietigheim-Bissingen. Schleifmuehle 7 D Bietigheim-Bissingen
Catalog 2016 ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH PO Box 1631 D 74306 Bietigheim-Bissingen Schleifmuehle 7 D 74321 Bietigheim-Bissingen Telefon +49 (0) 7142 / 920050 Telefax +49 (0) 7142 /
Opto Semiconductors. White LED
Hyper TOPLED White LED Vorläufige Daten / Preliminary Data Besondere Merkmale GaN-Technologie Farbe: weiß x =.3, y =.32 nach CIE1931 Abstrahlcharakteristik: Lambertscher Strahler (12 ) ESD-sicher bis 2
Taster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
With your design proposals or our available simulation and calculation programs, our R&D department realizes and delivers quick solutions.
HAHN offers solutions for product developers of switching power supplies. In response to the variety of designs which are available on the market, HAHN combines demands and wishes of the developers to
ATEX-Check list. Compiled by: Date: Signature: Acceptable practice at the determination of flash point: Closed cup according to ISO 2719
Fire and explosion hazard ATEX 137 1999/92/EG und ATEX 95 2014/34/EU Danger assessment and determination of explosion protection zone for the test space as well as the installation site ATEX-Check list
Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series.
BEARINGS A L L FOR B E YOUR A R IFUTURE N G S 1 Zöllige Radialrillenkugellager - Sondergrössen Inch Series / Commercial Inch Series Zen Ball Bearings are manufactured to the highest quality for standard
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
BPX 80 BPX NPN-Silizium-Fototransistor Zeilen Silicon NPN Phototransistor Arrays BPX 80 BPX
NPN-Silizium-Fototransistor Zeilen Silicon NPN Phototransistor Arrays BPX 80 Maße in mm, wenn nicht anders angegeben/dimensions in mm, unless otherwise specified. feo06367 fez06365 Wesentliche Merkmale
AC/DC-Schaltnetzteile 100 W AC/DC Switching Power Supplies 100 W. Merkmale / Features. Eingangsbereich 90...264 V AC
E176177 Merkmale / Features Eingangsbereich 90...264 V AC / Universal Input 90...264 V AC Wirkungsgrad bis zu 90 % / Efficiency up to 90 % Full-Brick Gehäuse / Full Brick Package Aktiv PFC Funktion / Active
THT/THR Connectors THT/THR Steckverbinder
Contact Cambridge Connectors. Phone +44 1223 860041 Email: sales@cambridgeconnectors.com THT/THR Connectors THT/THR Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES
ITAC Bedienungsanleitung User manual. Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren.
D Bedienungsanleitung User manual Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren. This user manual contains important information for installation and operation.
Überspannungsschutz für Bauteile und Schaltungen mit Hilfe von TVS-Dioden. Circuits using TVS Diodes
Überspannungsschutz für Bauteile und Schaltungen mit Hilfe von TVS-Dioden Overvoltage Protection of Devices and Circuits using TVS Diodes Was ist eine TVS Diode? What is a TVS diode? I F V C V BR V WM
Spezifikation für Freigabe / specification for release
@@FRM 1@@ Spezifikation für Freigabe / specification for release : A Mechanische Abmessungen / dimensions: Größe / size 1008 A 2,5 ± 0,2 mm B 2,0 ± 0,2 mm C 1,0 (max.) mm D 0,5 ± 0,3 mm B Elektrische Eigenschaften
Produktdatenblatt. Artikel Nr.: Wand- / Deckenleuchte, LED Panel RGB, Weiß, 24V DC, 36,00 W, RGB. Technische Daten.
Produktdatenblatt Artikel Nr.: 170924 Wand- / Deckenleuchte, LED Panel RGB, Weiß, 24V DC, 36,00 W, RGB Technische Daten Charakteristik Material Farbe Aluminium Weiß Optik im Lieferumfang Elektrische Daten
D-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
Notification of changes New packaging for snap-in capacitors from Xiamen, China
May 18, 2012 Notification of changes New packaging for snap-in capacitors from Xiamen, China From November 2012, new standard packages will be introduced for the following EPCOS snap-in capacitors from
Oil / Air cooler ASA-TT 11 12V/24V DC Öl /Luftkühler ASA-TT 11 12V/24V DC
Oil / Air cooler ASATT 11 12V/24V DC Öl /Luftkühler ASATT 11 12V/24V DC Pressure drop at 30 cst Druckabfall bei 30 cst Specific Cooling Performance Spezifische Kühlleistung TECHNICAL DATA TECHNISCHE DATEN
Barcodescanner CLV62x, CLV63x, CLV64x, CLV65x
T E C H N I S C H E I N F O R M AT I O N Diese Technische Information ergänzt die Betriebsanleitungen der Barcodescanner-Familie CLV6xx mit Angaben zur UL60950-Zertifizierung. Betriebsanleitung CLV62x
Anlage zur Akkreditierungsurkunde D-PL nach DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Anlage zur Akkreditierungsurkunde D-PL-11055-09-00 nach DIN EN ISO/IEC 17025:2005 Gültigkeitsdauer: 09.02.27 bis 18.10.2020 Ausstellungsdatum: 09.02.27 Urkundeninhaber:
Produktdatenblatt. Artikel Nr.: Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W. Technische Daten.
Produktdatenblatt Artikel Nr.: 110010 Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W Technische Daten Charakteristik Material Farbe Aluminium Druckguss Weiß-matt Optik im Lieferumfang
LBK 2/11. Lichtbandsystem Continuous Row Lighting System. 11-poliges Lichtbandsystem 11-pole continuous row lighting system
LBK 2/11 Lichtbandsystem Continuous Row Lighting System 11-poliges Lichtbandsystem 11-pole continuous row lighting system Kompakte Ausführung Compact design Vorkonfektionierte Einheiten lieferbar Available
FMC. 52 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
Product Description Produktbeschreibung
THT/THR Connectors Product Description Produktbeschreibung Advantages and Special Features Our THR (Through Hole Reflow) connectors were specifically designed for the SMT manufacturing process. The basis
0603 (1608) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 (1608) wire-wound (AgPd/Ni/Sn Metallisation)
compliant 0603 (1608) drahtgewickelt (AgPd/Ni/Sn Metallisierung) 0603 (1608) wire-wound (AgPd/Ni/Sn Metallisation) - 18 - Allgemeine Eigenschaften zu den drahtgewickelten SMD-Spulen Bauform 0603 / Baureihe
E1 M1 P5 TK2 K2 20,6. hohe elektrische Nennleistung Schlüsselabzugstellung (Option) Wahl Aus/Ein. Umschalter/Wechsler. mit Federumkehr oder Umschalter
Frontplattenmontage Schlüsselschalter Baureihe E1 M1 P5 TK2 K2 Lochausschnitt (mm) 15,1 15,1 15,1 15,1 20,6 16,2/22,5 19,1 Charakteristik zweipoliger Umschalter/ Wechsler oder drei Schaltkreisschaltfunktionen
PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module
LSS PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module The LSS PROFIBUS-DP repeaters 1 to 1 and 1 to 5 are used for coupling up to six PROFIBUS bus segments in RS 485 bus technology.
Micro-RF. 294 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
Micro-RF components can be used up to 6 GHz in various wireless applications, e. g. cellular and cordless phones, Bluetooth and wireless LAN applications, PDAs (Personal Digital Assistants) or wireless